- ALL
-
1100
A
-
488
B
-
120
C
-
292
D
-
231
E
-
336
F
-
468
G
-
573
H
-
78
I
-
348
J
-
724
K
-
170
L
-
1003
M
-
496
N
-
73
O
-
322
P
-
13
Q
-
517
R
-
1229
S
-
424
T
-
23
U
-
169
V
-
74
W
-
16
X
-
207
Y
-
237
Z
A
-
A, MANIVANNAN
Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
-
A, Shamila
Stability Assessment Metamorphic Approach (SAMA) for Effective Scheduling based on Fault Tolerance in Computational Grid [Volume 27, Issue 5, 2014, Pages 699-708]
-
A., Meysam
Determination of Optimal Allocation and Penetration Level of Distributed Energy Resources Considering Short Circuit Currents [Volume 33, Issue 3, 2020, Pages 427-438]
-
Aaghaakouchak, A.A.
A Study of Dynamic Characteristics of a Multistory Building Using Ambient Vibration Tests (TECHNICAL NOTE) [Volume 9, Issue 1, 1996, Pages 57-60]
-
A. AL-Neami, M.
Experimental Work on the Effect of Under-reamed Pile Geometry on the Pullout Capacity of Sand [Volume 36, Issue 9, 2023, Pages 1645-1651]
-
Aazami, A.
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Aazami, R.
Optimal Capacity and Location for Renewable-based Microgrids Considering Economic Planning in Distribution Networks [Volume 36, Issue 12, 2023, Pages 2175-2183]
-
Aazami, R.
Application of Cluster Technique for Loss Estimation in Distribution Feeders via Limited Measurement Data [Volume 37, Issue 8, 2024, Pages 1556-1568]
-
A. Azami, M.
A Review of the Control Techniques for Brushless Direct Current Motors (REVIEW PAPER) [Volume 12, Issue 1, 1999, Pages 49-67]
-
A. Azami, M.
a Simple Speed Control Technique and Pulsating Torque Elimination Method in a Brushless Dc Motor [Volume 13, Issue 2, 2000, Pages 19-26]
-
Abaei, M.
Microstructure and Corrosion Behavior of Al-Cu-Fe Quasi-crystalline Coated Ti-6Al-4V Alloy [Volume 36, Issue 10, 2023, Pages 1880-1891]
-
Abaei Kashan, A.
An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
-
Abasaeed, Ahmed E.
Modeling of Riyadh Sewage Treatment Plant: 1-Model Development, Verification and Simulation [Volume 22, Issue 3, 2009, Pages 211-220]
-
Abazari, Amir Musa
Couple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor [Volume 29, Issue 6, 2016, Pages 852-861]
-
Abbas, Faheem
Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
-
Abbas, H. O.
Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
-
Abbas, H. O.
Laboratory Study on Reinforced Expansive Soil with Granular Pile Anchors [Volume 33, Issue 7, 2020, Pages 1167-1172]
-
Abbas, H. O.
Numerical Analysis of Stress Distribution During Tunneling in Clay Stone Rock [Volume 33, Issue 8, 2020, Pages 1472-1478]
-
Abbas, H. O.
Behavior of Raft Foundation Built on Layered Soil under Different Earthquake Excitation [Volume 35, Issue 8, 2022, Pages 1509-1515]
-
Abbas, S. A.
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Abbas, Waleed A.
Synergistic Effects of Composite Expired Cement Fly Ash Cold-Bonding Aggregates and Mineral Admixtures on the Mechanical and Drying Shrinkage Performance of Sustainable Self-Compacted Concrete [(Articles in Press)]
-
Abbasghorbani, M.
Prioritization of Transmission Network Components Based on their Failure Impact on Reliability of Composite Power Systems [Volume 35, Issue 3, 2022, Pages 502-509]
-
Abbasi, A.
Analysis of Shaded Pole Induction Motors Considering Asymmetrical Flux Distribution and Saturation Effects [Volume 9, Issue 4, 1996, Pages 189-200]
-
Abbasi, B.
A Generalized Linear Statistical Model Approach to Monitor Profiles [Volume 20, Issue 3, 2007, Pages 233-242]
-
Abbasi, B.
A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
-
Abbasi, B.
A Closed-Form Formula for the Fair Allocation of Gains in Cooperative N-Person Games [Volume 25, Issue 4, 2012, Pages 303-310]
-
Abbasi, B.
Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
-
Abbasi, M
Application of an Additive Self-tuning Controller for Static Synchronous Series Compensator for Damping of Sub-synchronous Resonance Oscillations [Volume 31, Issue 4, 2018, Pages 564-573]
-
Abbasi, M.
Poultry Slaughterhouse Wastewater Treatment Using Anaerobic Fluid Bed Reactor and Aerobic Mobile-Bed Biological Reactor [Volume 32, Issue 5, 2019, Pages 634-640]
-
Abbasi, M.
Efficient Parallelization of a Genetic Algorithm Solution on the Traveling Salesman Problem with Multi-core and Many-core Systems [Volume 33, Issue 7, 2020, Pages 1257-1265]
-
Abbasi, M.
Effect of Non-uniform Magnetic Field on Non-newtonian Fluid Separation in a Diffuser [Volume 33, Issue 7, 2020, Pages 1354-1363]
-
Abbasi, M.
Redesigning and Re-planning of Location, Pricing, Inventory and Marketing Decisions in a Multi-channel Distribution Network: A Case Study [Volume 36, Issue 2, 2023, Pages 420-432]
-
Abbasi, Maysam
Using Dynamic Thermal Rating and Energy Storage Systems Technologies Simultaneously for Optimal Integration and Utilization of Renewable Energy Sources [Volume 33, Issue 1, 2020, Pages 92-104]
-
Abbasi, M. H.
Thermodynamic Investigation of Copper Removal From Liquid Slag. [Volume 5, Issue 3, 1992, Pages 99-104]
-
Abbasi, S.
Autonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach [Volume 31, Issue 9, 2018, Pages 1593-1601]
-
Abbasi, S.
Investigation on Nose and Tail Shape Effects on Hydrodynamic Parameters in Autonomous Underwater Vehicles [Volume 31, Issue 12, 2018, Pages 2102-2108]
-
Abbasi, S. M.
Effect of Aging Treatment on Microstructure and Mechanical Properties of Al0.7CoCrFeNi High Entropy Alloy [Volume 36, Issue 6, 2023, Pages 1060-1065]
-
Abbasian, A.
Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
-
Abbasian, T.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Abbasian Arani, A. A.
Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink [Volume 35, Issue 5, 2022, Pages 943-953]
-
Abbasi Hoseini, A.
Flow Field Study Over the Wing of a Fighter-Type Aircraft Model [Volume 17, Issue 4, 2004, Pages 399-410]
-
Abbasi Nargesi, Farshad
The Influence Of Process Control Agent (P.C.A)’S State on Expedition of Mechanical Alloying of Anostructure Tial(Γ) Alloy [Volume 23, Issue 2, 2010, Pages 139-146]
-
Abbasi Nargesi, Farshad
Studying the Effect of Productive Factors on Synthesis of Anostructure Tial (Γ) Alloy By Mechanical Alloying [Volume 23, Issue 2, 2010, Pages 147-156]
-
Abbasi Nargesi, Farshad
Synthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy [Volume 24, Issue 2, 2011, Pages 123-130]
-
Abbasnejad, Alireza
An Experimental Investigation into the Arching Effect in Fine Sand [Volume 21, Issue 4, 2008, Pages 345-360]
-
Abbasnejad, Alireza
Frictional Strain Hardening-softening in Experimental and Numerical Investigation of Arching Effect [Volume 28, Issue 2, 2015, Pages 180-189]
-
Abbasnejad, B.
Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
-
Abbasnejad, Behrokh
Stability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators [Volume 27, Issue 3, 2014, Pages 487-498]
-
Abbaspour, M.
Wind Energy Estimation for Production of Electricity in Iran [Volume 10, Issue 1, 1997, Pages 19-26]
-
Abbaspour, M.
Application of Boundary Element Method to 3 D Submerged Structures With Open Ends (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 97-104]
-
Abbaspour, Mohammad
EXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS [Volume 24, Issue 4, 2011, Pages 403-410]
-
Abbaspour, S
Loading Drug on Nanostructured Ti6Al4V-HA for Implant Applications [Volume 31, Issue 8, 2018, Pages 1159-1165]
-
Abbaspour, Z.
Study of Pitting Corrosion Inhibition of Mild Steel by Nitrite in Concrete Pore Solution by Polarization and Zero Resistance Ammetery (ZRA) Techniques (RESEARCH NOTE) [Volume 22, Issue 4, 2009, Pages 369-380]
-
Abbaspour-sani, K.
Sizing of a Packed Bed Storage for Solar Air Heating Systems (TECHNICAL NOTE) [Volume 16, Issue 2, 2003, Pages 155-162]
-
Abbaspour-sani, K.
An Improved Modular Modeling for Analysis of Closed-Cycle Absorption Cooling Systems [Volume 21, Issue 1, 2008, Pages 57-70]
-
Abbaspour Sani, E.
Design and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations [Volume 31, Issue 11, 2018, Pages 1883-1892]
-
Abbaspour-Sani, E
A New Structure for 6 Bit Distributed MEMS Transmission LinePhase Shifter in Ku Band [Volume 31, Issue 2, 2018, Pages 315-321]
-
Abbass, M. M.
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Abbassi, A.
Numerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 391-400]
-
Abbassi, A.
Unsteady Heat and Mass Transfer Near the Stagnation-point on a Vertical Permeable Surface: a Comprehensive Report of Dual Solutions [Volume 28, Issue 5, 2015, Pages 771-780]
-
Abbaszadeh, K.
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Abbaszadeh, M.A.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Abbaszadeh, R.
Laboratory Model Tests to Study the Behavior of Soil Wall Reinforced by Weak Reinforcing Layers [Volume 21, Issue 4, 2008, Pages 361-374]
-
Abbaszadehtoori, MANOUCHEHR
Attitude Estimation of Nano-satellite according to Navigation Sensors using of Combination Method (TECHNICAL NOTE) [Volume 28, Issue 7, 2015, Pages 964-969]
-
Abd Al-Hamza, M.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Abd Ali, H. S.
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Abdallah, K. S.
A Collaborative Stochastic Closed-loop Supply Chain Network Design for Tire Industry [Volume 31, Issue 10, 2018, Pages 1715-1722]
-
Abd- Awn, S. H.
Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
-
Abdelaati, R
Emulation, Model Identification and New-approach Characterization of a PV Panel (TECHNICAL NOTE) [Volume 31, Issue 8, 2018, Pages 1222-1227]
-
Abd El-Hamid, M.
Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
-
Abdelkader, H.
Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
-
Abdella, Galal
EFFECT OF LOCATION OF EXPLANATORY VARIABLE ON MONITORING POLYNOMIAL QUALITY PROFILES [Volume 25, Issue 2, 2012, Pages 131-140]
-
Abderrazak, L.
Fuzzy Logic Control of Maximum Power Point Tracking Controller in an Autonomous Hybrid Power Generation System by Extended Kalman Filter for Battery State of Charge Estimation [Volume 36, Issue 2, 2023, Pages 199-214]
-
Abdessemed, R.
Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
-
Abdessemed, R.
A New Speed Control Approach of Linear Induction Motor Based on Robust RST Controller and Model Reference Adaptive System Estimator [Volume 36, Issue 4, 2023, Pages 630-639]
-
Abdi, F
Project Scheduling with Simultaneous Optimization, Time, Net Present Value, and Project Flexibility for Multimode Activities with Constrained Renewable Resources [Volume 31, Issue 5, 2018, Pages 780-791]
-
Abdi, F.
Reduction of Insolvency Risk and Total Costs in Banking Sector using Partners Selection Approach with Genetic Algorithm and Multilayer Perceptron Neural Network [Volume 37, Issue 8, 2024, Pages 1667-1690]
-
Abdi, Javad
Control of Multivariable Systems Based on Emotional Temporal Difference Learning Controller [Volume 17, Issue 4, 2004, Pages 363-376]
-
Abdi, M. R.
Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
-
Abdi, S.
Comprehensive Framework of Influential Factors on Innovation Ecosystem Resilience: Using Meta-Synthesis and Structural Equation Modelling [Volume 37, Issue 2, 2024, Pages 323-340]
-
Abdideh, M.
Investigation of the Effect of L-Ascorbic Acid on Class G Oil Well Cement [Volume 32, Issue 3, 2019, Pages 360-365]
-
Abdipour, A.
A Novel Metamaterial Microelectromechanical Systems Phase Shifter with High Phase Shift and High Bandwidth [Volume 32, Issue 8, 2019, Pages 1163-1168]
-
Abdo, Maher
Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
-
Abdolahi, M.
A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
-
Abdolalipouradl, M.
Energy and Exergy Analysis of a New Power, Heating, Oxygen and Hydrogen Cogeneration Cycle Based on the Sabalan Geothermal Wells [Volume 32, Issue 3, 2019, Pages 445-450]
-
Abdolalipouradl, M.
Thermodynamic Analysis of New Cogeneration Cycle Based on Gaynarje Hotspring [Volume 33, Issue 6, 2020, Pages 1149-1155]
-
Abdoli, R.
Experimental and Numerical Analysis of Permeability in Porous Media [Volume 33, Issue 11, 2020, Pages 2408-2415]
-
Abdollahi, Davoud
A Numerical Improvement in Analyzing the Dynamic Characteristics of an Electrostatically Actuated Micro-beam in Fluid Loading with Free Boundary Approach [Volume 29, Issue 7, 2016, Pages 1005-1013]
-
Abdollahi, M.
Reconstitution of Sand Specimens Using a Rainer System [Volume 30, Issue 10, 2017, Pages 1451-1463]
-
Abdollahi, M.
Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam [Volume 37, Issue 5, 2024, Pages 1036-1049]
-
Abdollahi, Parvin
An Iterative Decision Rule to minimize cost of Acceptance Sampling Plan in Machine Replacement Problem [Volume 27, Issue 7, 2014, Pages 1099-1106]
-
Abdollahi, Reza
Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
-
Abdollahi, Seyed Mohammad
Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
-
Abdollahi Chirani, A.
Artificial Neural Network-based Fault Location in Terminal-hybrid High Voltage Direct Current Transmission Lines [Volume 36, Issue 2, 2023, Pages 215-225]
-
Abdollahi Moghaddam, Mohammad
Modeling Transport Phenomena in Selective Catalytic Reductant Catalytic Converter with NH3 as Reductant for NO Degradation [Volume 29, Issue 9, 2016, Pages 1183-1190]
-
Abdollahzade, Majid
Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
-
Abdollah-zadeh, A.
Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
-
Abdollahzadeh, Gholamreza
Evaluation of Damage Distribution in Elements of Dual Frames [Volume 25, Issue 4, 2012, Pages 279-288]
-
Abdollahzadeh, Gholamreza
Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 293-306]
-
Abdollahzadeh, M.
Allocation of Posts to a Tele-Communication Center Through Kavos (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 73-78]
-
Abdollahzadeh Sharghi, E.
The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
-
Abdollahzadeh Sharghi, Elham
The Study of Organic Removal Efficiency and Membrane Fouling in a Submerged Membrane Bioreactor Treating Vegetable Oil Wastewater [Volume 29, Issue 12, 2016, Pages 1642-1649]
-
Abdollahzadeh Sharghi, Elham
Performance of Continuous Electrocoagulation Process for Turbidity Removal from Sand Filter Backwash Water [Volume 32, Issue 12, 2019, Pages 1696-1703]
-
Abdolmajidi, M.
Thermodynamic Modeling the Solubility of CO2 in Aqua System of Methyldiethanolamine and 2-(2-Aminoethylamino)ethanol Using the Nonelectrolyte Wilson Nonrandom Factor [Volume 33, Issue 12, 2020, Pages 2436-2442]
-
Abdolmaleki, A.
Preparation and Characterization of SiO2-CaCl2 Nanocomposite by the Sol-Gel Method [Volume 22, Issue 3, 2009, Pages 299-305]
-
Abdolrahimi, H.
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Abdoos, A. A.
A New Restricted Earth Fault Relay Based on Artificial Intelligence [Volume 32, Issue 1, 2019, Pages 62-70]
-
Abdoos, A. A.
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Abdoos, A. A.
Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
-
Abdoos, A. A.
Discrimination between Inrush and Internal Fault Currents in Power Transformers Using Hyperbolic S-Transform [Volume 36, Issue 12, 2023, Pages 2184-2189]
-
Abdoulzadeh, A.
Beneflciation Studies of Bama Oxidized Lead and Zinc Ore [Volume 10, Issue 3, 1997, Pages 173-180]
-
Abdul Ghani, Mohamad
Experimental Studies on Savonius-type Vertical Axis Turbine for Low Marine Current Velocity [Volume 26, Issue 1, 2013, Pages 91-98]
-
Abdul Halim, A.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Abdulkadir, Said Jadid
Hierarchical Deep Learning Model for Tooth Classification in Intra-Oral Dental Photographs [(Articles in Press)]
-
Abdul Kadir, A.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Abdul Kaream, K. W.
Assessment of Changes in Shear Strength Parameters for Soils below Circular Machine Foundation [Volume 33, Issue 8, 2020, Pages 1491-1498]
-
Abdulkareem, B. F.
An Experimental Study to Predict a New Formula for Calculating the Deflection in Wide Concrete Beams Reinforced with Shear Steel Plates [Volume 36, Issue 2, 2023, Pages 360-371]
-
Abdullah, A. H.
Interaction Effect of Depth of Cut, Back Rake Angle and Rock Properties on Temperature of Single Polycrystalline Diamond Compact Cutter [Volume 33, Issue 11, 2020, Pages 2425-2435]
-
Abdullah, A. Z.
Pretreated Palm Oil Mill Effluent (POME) Digestion in an Up-Flow Anaerobic Sludge Fixed Film Bioreactor: a Comparative Study [Volume 19, Issue 1, 2006, Pages 1-9]
-
Abdullah, Noor Halizah
Effects of Compactor Types on Aggregate Orientation of Asphalt Mixtures [Volume 26, Issue 7, 2013, Pages 677-684]
-
Abdullah, T. H.
Numerical Analysis of Stress Distribution During Tunneling in Clay Stone Rock [Volume 33, Issue 8, 2020, Pages 1472-1478]
-
Abdullah, W. N. A. S
Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
-
Abdullah, W. S.
Joining Two Dissimilar Metals of Aluminum 5052 to Austenitic Stainless Steel 304 using Ultrasonic Friction Stir Welding [Volume 36, Issue 8, 2023, Pages 1489-1501]
-
Abdul Latiff, Ab A.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Abdulmadjid, S. N.
Discrimination of Plastic Waste using Laser-induced Breakdown Spectroscopy-principal Component Analysis: Highlighting Molecular LIBS [Volume 36, Issue 1, 2023, Pages 98-107]
-
Abdulmajeed, B. A.
Synthesis, Characterization, and Application of EDTA-Coated Maghemite Magnetic Nanoparticles for Oil Spill Cleanup from Water Surface [Volume 37, Issue 8, 2024, Pages 1500-1509]
-
AbdulMajeed Allawi, Abbas
Structural Behavior of Axially Loaded Composite Concrete-steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1548-1558]
-
Abdul Rahim, H
Analysis of Bacterial Contaminant in Pasir Gudang, Johor Tap Water Supply–Varies pH Value Observation [Volume 31, Issue 8, 2018, Pages 1455-1463]
-
Abdul Rahman, Ahmad Baharuddin
Seismic Performance of Low-Ductility Precast Wall Structure with Base Isolation [Volume 26, Issue 2, 2013, Pages 153-162]
-
AbdulRahman, Sh.
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Abdul Rahman–Al Ezzi, A.
An Experimental Investigation of Synergistic Pulsation Bubble Column with Inverse Fluidized Loop Reactor for Removing Chloroform from Wastewater [Volume 33, Issue 11, 2020, Pages 2120-2126]
-
Abdulrehman, M. A.
Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
-
Abdulrehman, M. A.
Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
-
Abdulrehman, M. A.
Evaluation of lightweight Concrete Core Test Including Steel Bars [Volume 36, Issue 6, 2023, Pages 1121-1128]
-
Abdulridha, A. A.
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Abdul Samad, Abdul Aziz
Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
-
Abed, M. M.
Synthesis, Characterization, and Evaluation of an Eco-friendly Demulsifier for Crude Oil Emulsion Treatment Using Waste Corn Oil [Volume 37, Issue 3, 2024, Pages 468-475]
-
Abed-Awn, S. H.
Behavior of Raft Foundation Built on Layered Soil under Different Earthquake Excitation [Volume 35, Issue 8, 2022, Pages 1509-1515]
-
Abedi, M.
Lightning Protection of Ehv Substations in Iran [Volume 2, Issue 3, 1989, Pages 104-111]
-
Abedi, M.
The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]
-
Abedi, M.
An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
-
Abedi, M.
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Abedi, M.
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Abedi, Saeed
An Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor [Volume 27, Issue 6, 2014, Pages 889-898]
-
Abedini, E.
The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
-
Abedini, M.
Improved Simultaneous Localization and Mapping Estimation using Crow Search Algorithm Based Particle Filter [Volume 36, Issue 10, 2023, Pages 1827-1838]
-
Abedini, R.
The Energy and Exergy Analysis of Integrated Hydrogen Production System Using High Temperature Steam Electrolysis with Optimized Water Path (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 893-900]
-
Abedini, V.
Cutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys [Volume 33, Issue 6, 2020, Pages 1142-1148]
-
Abedini-Ahangarkola, H.
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Abedi Pahnekollaei, S. M.
Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
-
Abessi, O.
Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
-
Abghari, Ramin
Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]
-
Abhigna, D.
Effect of Gap Acceptance Behavior of the Right Turning Vehicles on the Major Road Stream for Uncontrolled Three-Legged Intersections under Mixed Traffic Conditions [Volume 31, Issue 6, 2018, Pages 870-876]
-
Abjadi, Navid
Design and Implementation of a Constant Frequency Sliding Mode Controller for a Luo Converter [Volume 29, Issue 2, 2016, Pages 202-210]
-
Abjadi, N. R.
A Novel Stand-Alone Single-Phase Induction Generator Using a Three-Phase Machine and a Single-Phase PWM Inverter [Volume 16, Issue 3, 2003, Pages 259-268]
-
Abjadi, N. R.
An Adaptive Nonlinear Controller for Speed Sensorless PMSM Taking the Iron Loss Resistance into Account (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 151-160]
-
Abjadi, N. R.
Nonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System [Volume 33, Issue 2, 2020, Pages 237-247]
-
Abolfazlzadeh, M.
Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
-
Abolghasemi, A.H.
A Size-dependent Bernoulli-Euler Beam Formulation based on a New Model of Couple Stress Theory [Volume 27, Issue 6, 2014, Pages 951-960]
-
Abolghasemi, Ali
A Novel Volcano Smoke Antenna with Optimal Shape [Volume 26, Issue 3, 2013, Pages 263-276]
-
Abolghasemi, V.
Iterative Weighted Non-smooth Non-negative Matrix Factorization for Face Recognition [Volume 31, Issue 10, 2018, Pages 1698-1707]
-
Abolhassani, M. R.
Acousto-Refrigerator with an Adjustable Mechanical Resonator (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 183-196]
-
Abooei, M. H.
A POMDP Framework to Find Optimal Inspection and Maintenance Policies via Availability and Profit Maximization for Manufacturing Systems [Volume 31, Issue 12, 2018, Pages 2077-2084]
-
Abooei, M. H.
Designing a Model for Creation of Export Consortiain Business Cluster [Volume 33, Issue 3, 2020, Pages 459-467]
-
Abooie, M.
Modelling and Decision-making on Deteriorating Production Systems using Stochastic Dynamic Programming Approach [Volume 31, Issue 12, 2018, Pages 2052-2058]
-
Abooie, M. H.
Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
-
Abooie, Mohammad hossein
A Nonlinear Autoregressive Model with Exogenous Variables Neural Network for Stock Market Timing: The Candlestick Technical Analysis [Volume 29, Issue 12, 2016, Pages 1717-1725]
-
Abootorabi Zarchi, H.
Robust Optimal Speed Tracking Control of a Current Sensorless Synchronous Reluctance Motor Drive using a New Sliding Mode Controller [Volume 17, Issue 2, 2004, Pages 155-170]
-
Abouabdellah, A.
Identification of the Patient Requirements Using Lean Six Sigma and Data Mining [Volume 30, Issue 5, 2017, Pages 691-699]
-
Abouali, O.
Three-Dimensional Simulation of Airflow and Nano-Particle Beam Focusing in Aerodynamic Lenses(RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 45-54]
-
Abouali, O.
Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
-
Aboumdian, S.
Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
-
Abou rashid, Aysar
Using artificial neural network methods to increase the sensitivity of distance protection [(Articles in Press)]
-
Aboutalebi, Seyed Hamed
Modeling of Compressive Strength of Metakaolin Based Geopolymers by The Use of Artificial Neural Network RESEARCH NOTE) [Volume 23, Issue 2, 2010, Pages 145-152]
-
Abrahim, M. J.
Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021, Pages 2636-2641]
-
Abtahi, Z.
A New Approach Generating Robust and Stable Schedules in m-Machine Flow Shop Scheduling Problems: A Case Study [Volume 33, Issue 2, 2020, Pages 293-303]
-
Abtahi, Z.
A Stochastic Model for Prioritized Outpatient Scheduling in a Radiology Center [Volume 33, Issue 4, 2020, Pages 598-606]
-
Abtahi, Z.
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Abualigah, L.
Umpire’s Signal Recognition in Cricket Using an Attention based DC-GRU Network [Volume 37, Issue 4, 2024, Pages 662-674]
-
Abu Bakar, Rosli
Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile [Volume 21, Issue 3, 2008, Pages 291-302]
-
Abu Bakar, Rosli
An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption [Volume 22, Issue 1, 2009, Pages 91-97]
-
AbuSalim, Samah
Hierarchical Deep Learning Model for Tooth Classification in Intra-Oral Dental Photographs [(Articles in Press)]
-
Achyutha kumar reddy, M.
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Adabi, J.
An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
-
Adabi, J.
Energy Management of an Integrated PV/Battery/Electric Vehicles Energy System Interfaced by a Multi-port Converter [Volume 36, Issue 8, 2023, Pages 1520-1531]
-
Adabi firouzjaee, Jafar
A High Gain Bipolar Pulse Generator with Low Voltage Input Source [Volume 32, Issue 8, 2019, Pages 1126-1133]
-
Adabi Firouzjaee, J
Distributed Generation Expansion Planning Considering Load Growth Uncertainty: A Novel Multi-Period Stochastic Model [Volume 31, Issue 3, 2018, Pages 405-414]
-
Adam, M. R
Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
-
Adami, M.
Transient Two-Dimensional (r-z) Cyclic Charging/Discharging Analysis of Space Thermal Energy Storage Systems (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 205-210]
-
Adami, P.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Adebayo, S.
Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
-
Adham, K.
Prediction of Temperature Profile of a Buried Gas Pipeline Through Utilization of Corresponding States Principle [Volume 2, Issue 1, 1989, Pages 1-4]
-
Adi, W. A.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Adibee, Nabiollah
An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
-
Adibi, A.
Simulation and Design of an Organic Quantum Film Electrooptic Switch [Volume 8, Issue 4, 1995, Pages 191-198]
-
Adibi, A.
Semiconductor Device Simulation by a New Method of Solving Poisson, Laplace and Schrodinger Equations (RESEARCH NOTE) [Volume 13, Issue 1, 2000, Pages 89-94]
-
Adibi, M
Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran [Volume 31, Issue 8, 2018, Pages 1292-1301]
-
Adibi, Omid
A Characteristic-based Solution of Forced and Free Convection in Closed Domains with Emphasis on Various Fluids [Volume 32, Issue 11, 2019, Pages 1689-1695]
-
Adibi, Omid
A Characteristic-based Numerical Simulation of Water-titanium Dioxide Nano-fluid in Closed Domains [Volume 33, Issue 1, 2020, Pages 158-163]
-
Adibi, T.
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Adibi, Tohid
A Characteristic-based Solution of Forced and Free Convection in Closed Domains with Emphasis on Various Fluids [Volume 32, Issue 11, 2019, Pages 1689-1695]
-
Adibi, Tohid
A Characteristic-based Numerical Simulation of Water-titanium Dioxide Nano-fluid in Closed Domains [Volume 33, Issue 1, 2020, Pages 158-163]
-
Adilla Subha, N
Analysis of Bacterial Contaminant in Pasir Gudang, Johor Tap Water Supply–Varies pH Value Observation [Volume 31, Issue 8, 2018, Pages 1455-1463]
-
Aditya, S.
Synthesis of Hard Layer by Titanium Addition During Welding Process and Quenched Directly [Volume 36, Issue 3, 2023, Pages 532-539]
-
Adjeloua, A.
Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
-
Adlene, R.
Fuzzy Logic Control of Maximum Power Point Tracking Controller in an Autonomous Hybrid Power Generation System by Extended Kalman Filter for Battery State of Charge Estimation [Volume 36, Issue 2, 2023, Pages 199-214]
-
Adlparvar, M. R.
Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
-
Adlparvar, M.R.
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Adnan, Azlan
Seismic Performance of Low-Ductility Precast Wall Structure with Base Isolation [Volume 26, Issue 2, 2013, Pages 153-162]
-
Adri, A.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Adriansyah, Y
Determining of Geotechnical Domain Based on Joint Density and Fault Orientation at Batu Hijau Mine,West Sumbawa-Indonesia (TECHNICAL NOTE) [Volume 31, Issue 4, 2018, Pages 679-683]
-
Afarin, M
Conjugated Linoleic Acid Production and Optimization Via Catalytic Reaction Method Using Safflower Oil [Volume 31, Issue 8, 2018, Pages 1166-1171]
-
Afjei, E.
A Novel Disc-Type Reluctance Motor [Volume 10, Issue 1, 1997, Pages 11-18]
-
Afjei, E.
a New Resonant Converter Circuit for Reluctance [Volume 12, Issue 2, 1999, Pages 69-80]
-
Afjei, E.
an Efficient Drive Circuit for Switched Reluctance Motor [Volume 12, Issue 3, 1999, Pages 137-143]
-
Afjei, E.
A Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 201-208]
-
Afjei, E.
Significant Error Propagation in the Finite Difference Solution of Non-Linear Magnetostatic Problems Utilizing Boundary Condition of the Third Kind [Volume 16, Issue 4, 2003, Pages 319-330]
-
Afjei, E.
Automatic Phase Advancing in Switched Reluctance Motor by Employing an Electronic Governor for a Desired Speed Angle Profile [Volume 17, Issue 1, 2004, Pages 11-18]
-
Afjei, E.
A New Hybrid Brushless DC Motor/Generator without Permanent Magnet [Volume 20, Issue 1, 2007, Pages 77-86]
-
Afjei, E.
A Novel Two Phase Hybrid Switched Reluctance Motor/Field-Assisted Generator: Concept, Simulation, and Experimental Confirmation [Volume 22, Issue 4, 2009, Pages 357-368]
-
Afjei, E.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Afjei, Ebrahim
Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
-
Afjei, Ebrahim
Comprehensive Design Procedure and Manufacturing of Permanent Magnet Assisted Synchronous Reluctance Motor [Volume 32, Issue 9, 2019, Pages 1299-1305]
-
Afkar, A.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Afkar, A.
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Afrakoti, I. E. P.
Face Recognition in Thermal Images based on Sparse Classifier [Volume 32, Issue 1, 2019, Pages 78-84]
-
Afrang, S.
Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
-
Afrang, S.
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Afshang, Hamid
Voltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach [Volume 32, Issue 11, 2019, Pages 1610-1619]
-
Afshar, A.
Pretreatment of Gray Cast Iron for Hard Chromium Electroplating (RESEARCH NOTES) [Volume 13, Issue 2, 2000, Pages 81-84]
-
Afshar, A.
Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
-
Afshar, A.
A Study of Zeta Potential of Plasma Sprayed Hydroxyapatite Coating in Four Simulated Physiological Solutions [Volume 16, Issue 4, 2003, Pages 343-354]
-
Afshar, M.
A Multi Objective Optimization Model for Multi-commodity Closed-loop Supply Chain Network Considering Disruption Risk [Volume 37, Issue 4, 2024, Pages 646-661]
-
Afshari, E
Enhancement of the Cooling System Performance of the Proton-exchange Membrane Fuel Cell By Baffle-restricted Coolant Flow Channels [Volume 31, Issue 5, 2018, Pages 812-819]
-
Afshin, Hossein
Hydrodynamics Analysis of Density Currents [Volume 21, Issue 3, 2008, Pages 211-226]
-
Aftabi Sani, A
Free Vibration of a Generalized Plane Frame [Volume 31, Issue 4, 2018, Pages 538-547]
-
Aftabi Sani, Ahmad
Free Vibration Analysis of a Sloping-frame: Closed-form Solution versus Finite Element Solution and Modification of the Characteristic Matrices (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 378-386]
-
Aftabi Sani, Ahmad
Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
-
Afulay Bouzid, A.
A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
-
Afzali, P.
Effect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy [Volume 31, Issue 12, 2018, Pages 2092-2101]
-
Agaguena, A.
Extraction of Inclined Exit Ledges in Coal Mines in Presence of Mobile Crushing and Conveyor Complexes [Volume 37, Issue 8, 2024, Pages 1658-1666]
-
Agah, A.
Mapping Hydrothermal Alteration Zones Associated with Copper Mineralization using ASTER Data: A Case Study from the Mirjaveh Area, Southeast Iran [Volume 36, Issue 4, 2023, Pages 720-732]
-
Agahi, H.
Plant Classification in Images of Natural Scenes Using Segmentations Fusion [Volume 33, Issue 9, 2020, Pages 1743-1750]
-
Agarwal, Priyanka
MARKOVIAN SOFTWARE RELIABILITY MODEL FOR TWO TYPES OF FAILURES WITH IMPERFECT DEBUGGING RATE AND GENERATION OF ERRORS [Volume 25, Issue 2, 2012, Pages 177-188]
-
Agarwal, Priyanka
MARKOVIAN SOFTWARE RELIABILITY MODEL FOR TWO TYPES OF FAILURES WITH IMPERFECT DEBUGGING RATE AND GENERATION OF ERRORS [Volume 25, Issue 2, 2012, Pages 177-188]
-
Agarwal, Priyanka
Fuzzy Reliability Evaluation of a Repairable System with Imperfect Coverage, Reboot and Common-cause Shock Failure [Volume 25, Issue 3, 2012, Pages 231-238]
-
Agarwal, Priyanka
Stability and Numerical Analysis of Malaria- mTB- HIV/AIDS Co-infection (TECHNICAL NOTE) [Volume 26, Issue 7, 2013, Pages 729-742]
-
Agarwal, Priyanka
Availability of k-out-of-n: F Secondary Subsystem with General Repair Time Distribution [Volume 26, Issue 7, 2013, Pages 743-752]
-
Agarwal, Priyanka
Performance Analysis of a Repairable Robot Safety System with Standby, Imperfect Coverage and Reboot Delay [Volume 26, Issue 9, 2013, Pages 1077-1088]
-
Agarwal, R.
Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
-
Agarwal, V.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
-
Agarwal, V.
Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
-
Agarwal, V.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Aggarwal, P.
Modeling of Unreinforced and Reinforced Pavement Composite Material Using HISS Model (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 13-22]
-
Aggarwal, P.
Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
-
Aggarwal, Y.
Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
-
Aghaali, E
Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 554-563]
-
Aghaali, V.
Effect of Al59Cu25.5Fe12.5B3 Quasi-crystals on Microstructure and Flexural Strength of Aluminum Matrix Composites Prepared by Spark Plasma Sintering Method [Volume 37, Issue 1, 2024, Pages 48-55]
-
Agha Amini Fashami, H.
The Effect of Rapid Deformation Process to Improve Creep and Tensile Resistance of AZ91 Magnesium Alloy Plates [Volume 33, Issue 10, 2020, Pages 2039-2046]
-
Aghababa, H.
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Aghabagheri, R.
A Phase Noise Reduction Technique in LC Cross-coupled Oscillators with Adjusting Transistors Operating Regions [Volume 33, Issue 4, 2020, Pages 560-566]
-
Aghabozorgi, M. R.
Blind Separation of Jointly Stationary Correlated Sources [Volume 16, Issue 4, 2003, Pages 331-346]
-
Aghaei, A.
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Aghaei Afshar, M.
A Bi-objective Cold Supply Chain for Perishable Products Considering Quality Aspects: A Case Study in Iran Dairy Sector [Volume 35, Issue 2, 2022, Pages 458-470]
-
Aghaei Araei, Ata
Experimental Investigation and Modeling of the Dynamic Properties of slag Ballast and Limestone Ballast [(Articles in Press)]
-
AghaeiAraei, Ata
Effects of Cement and Mineral Polymer on Geotechnical Properties of Silty Sand as the Base Material [(Articles in Press)]
-
Aghaie, A.
A Novel Excellence Model of the ICT Industry: Case Study on Telecommunications Backbone Network of Iran [Volume 33, Issue 10, 2020, Pages 2016-2029]
-
Aghajani, H
Parametric Optimization of Electro Spark Microwelding of Aluminum Clad Steel (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1146-1151]
-
Aghajani, H.
A Hybrid Fuzzy Multi-criteria Decision Making Model Based on Fuzzy DEMATEL with Fuzzy Analytical Network Process and Interpretative Structural Model for Prioritizing LARG Supply Chain Practices [Volume 32, Issue 3, 2019, Pages 413-423]
-
Aghajani, K.
Speech Emotion Recognition Using Scalogram Based Deep Structure [Volume 33, Issue 2, 2020, Pages 285-292]
-
Aghajanian, Soheil
Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
-
Aghajanian, Soheila
Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
-
Aghajani Delavar, mojtaba
Investigation of Thermo-hydraulic Performance of Circular Tube Fitted with Center-cleared Twisted Tape Using CFD Modeling (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 476-482]
-
Aghajani-Delavar, Naeem
Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
-
Aghajanzadeh, Omid
An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine [Volume 30, Issue 2, 2017, Pages 294-302]
-
Aghamohagheghi, M.
Soft Computing-based New Interval-valued Pythagorean Triangular Fuzzy Multi-criteria Group Assessment Method without Aggregation: Application to a Transport Projects Appraisal [Volume 32, Issue 5, 2019, Pages 737-746]
-
Aghanezhad, M.
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
-
Agha Shafiyi, M.
Evaluating Technical Requirements to Achieve Maximum Power Point in Photovoltaic Powered Z-Source Inverter [Volume 31, Issue 6, 2018, Pages 921-931]
-
Aghazadeh, H.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Aghazadeh, Hadi
Comprehensive Design Procedure and Manufacturing of Permanent Magnet Assisted Synchronous Reluctance Motor [Volume 32, Issue 9, 2019, Pages 1299-1305]
-
Aghazadeh, J.
Effects of Tungsten on the Pearlite Reaction in a Eutectoid Steel [Volume 8, Issue 3, 1995, Pages 147-158]
-
Aghnout, Soraya
Modeling of Substrate Noise Impact on a Single-Ended Cascode LNA in a Lightly Doped Substrate (RESEARCH NOTE) [Volume 23, Issue 1, 2010, Pages 23-28]
-
Aghsami, A.
A Post-disaster Assessment Routing Multi-objective Problem under Uncertain Parameters [Volume 33, Issue 12, 2020, Pages 2503-2508]
-
Agnihotri, P. G.
Experimental Investigation on Hard Rock Strata for the purpose of Ground Water Improvement with the inclusion of Bore Blasting Technique [Volume 37, Issue 9, 2024, Pages 1707-1715]
-
Agrawal, V.
Analytical Modeling of Heat Transfer Coefficient Analysis in Dimensionless Number of an Electric Parking Brake Using CFD [Volume 36, Issue 2, 2023, Pages 276-288]
-
Agrawal, Yash
Towards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer [Volume 29, Issue 4, 2016, Pages 554-562]
-
Agustina, T. E
Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 622-628]
-
Agustina, T. E
The Effect of Air Fuel Ratio and Temperature on Syngas Composition and Calorific Value Produced from Downdraft Gasifier of Rubber Wood-Coal Mixture [Volume 31, Issue 9, 2018, Pages 1480-1486]
-
Ahadi, M. R.
Single-vehicle Run-off-road Crash Prediction Model Associated with Pavement Characteristics [Volume 33, Issue 7, 2020, Pages 1375-1386]
-
Ahadi Akhlaghi, I.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Ahadzadeh, I.
Non-destructive Corrosion Monitoring of Reinforced Concrete Steel Rebars in Chloride Media by Smartphone Magnetic and Analog Hall-Effect Sensors [Volume 36, Issue 9, 2023, Pages 1626-1635]
-
Ahamd, R. A. R
The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
-
Ahangarani, shahrokh
A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition [Volume 29, Issue 5, 2016, Pages 677-687]
-
Ahangarani Farahani, A.
Controller Design of Hybrid-Time Delay-Petri Nets Based on Lyapunov Theory by Adding Control Places [Volume 36, Issue 10, 2023, Pages 1868-1879]
-
Ahangari, M.
A Hybrid Approach to Sentiment Analysis of Iranian Stock Market User’s Opinions [Volume 36, Issue 3, 2023, Pages 573-584]
-
Ahifar, A.
Finite Time Terminal Synergetic Controller for Nonlinear Helicopter Model [Volume 32, Issue 2, 2019, Pages 236-241]
-
Ahma, A
The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
-
Ahmad, A. L
Extraction of Acetaminophen from Aqueous Solution by Emulsion Liquid Membrane Using Taylor-Couette Column [Volume 31, Issue 8, 2018, Pages 1413-1420]
-
Ahmad, Furkan
Analysis of Flashover Voltages of Disc Type Insulator under Artificial Pollution Condition (TECHNICAL NOTE) [Volume 29, Issue 6, 2016, Pages 762-768]
-
Ahmad, N. A.
A Light Solution for Device Diversity Problem in a Wireless Local Area Network Fingerprint Indoor Positioning System [Volume 36, Issue 4, 2023, Pages 649-658]
-
Ahmad, R. A. R
Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
-
Ahmad, S. T. P.
Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
-
Ahmad, T.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Ahmadi, A.
Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
-
Ahmadi, B.
Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
-
Ahmadi, Elham
Optimal Process Adjustment with Considering Variable Costs for Uni-variate and Multi-variate Production Process (RESEARCH NOTE) [Volume 27, Issue 4, 2014, Pages 561-572]
-
Ahmadi, Elham
A Nonlinear Autoregressive Model with Exogenous Variables Neural Network for Stock Market Timing: The Candlestick Technical Analysis [Volume 29, Issue 12, 2016, Pages 1717-1725]
-
Ahmadi, F.
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment [Volume 32, Issue 2, 2019, Pages 184-192]
-
Ahmadi, G
Closed-loop Supply Chain Inventory-location Problem with Spare Parts in a Multi-Modal Repair Condition [Volume 31, Issue 2, 2018, Pages 346-356]
-
Ahmadi, Goodarz
Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
-
Ahmadi, Goodarz
Can the History Force be Neglected for the Motion of Particles at High Subcritical Reynolds Number Range? [Volume 19, Issue 1, 2006, Pages 23-34]
-
Ahmadi, Goodarz
Three-Dimensional Simulation of Airflow and Nano-Particle Beam Focusing in Aerodynamic Lenses(RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 45-54]
-
Ahmadi, Goodarz
Development of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements [Volume 20, Issue 2, 2007, Pages 105-116]
-
Ahmadi, Goodarz
Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition [Volume 22, Issue 3, 2009, Pages 295-305]
-
Ahmadi, Goodarz
Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
-
Ahmadi, H.
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Ahmadi, H.
Vibration Analysis of Double Deck Floating Roof of Storage Tank in Cases of Tube, Ordinary and Thickened Foam Seals [Volume 35, Issue 7, 2022, Pages 1398-1415]
-
Ahmadi, H.
Electricity Supply Model of Conventional Residential Buildings in Tehran with Priority on Renewable Energy Using Adaptive Fuzzy-neural Inference System [Volume 36, Issue 10, 2023, Pages 1793-1814]
-
Ahmadi, Hamid Reza
The Effect of Analysis Methods on the Response of Steel Dual-System Frame Buildings for Seismic Retrofitting [Volume 22, Issue 4, 2009, Pages 317-331]
-
Ahmadi, I.
Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
-
Ahmadi, Kamran
PHASE STABILITY AND CONDUCTIVITY OF δ-Bi2O3 WITH MIXTURE OF YTTRIUM AND YTTERBIUM OXIDES [Volume 25, Issue 2, 2012, Pages 159-164]
-
Ahmadi, M.
A Secure Routing Algorithm for Underwater Wireless Sensor Networks [Volume 31, Issue 10, 2018, Pages 1659-1665]
-
Ahmadi, M.
Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading [Volume 33, Issue 8, 2020, Pages 1529-1543]
-
Ahmadi, M.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Ahmadi, Mohammad Hossein
Prediction of Engineered Cementitious Composite Material Properties Using Artificial Neural Network [Volume 32, Issue 11, 2019, Pages 1534-1542]
-
Ahmadi, S.
Influences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength [Volume 32, Issue 6, 2019, Pages 805-812]
-
Ahmadi, S. M.
Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
-
AHMADI, AHMAD
Waterhammer Caused by Intermittent Pump Failure in Pipe Systems Including Parallel Pump Groups [Volume 29, Issue 4, 2016, Pages 444-453]
-
Ahmadian, M
Fracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route [Volume 31, Issue 1, 2018, Pages 19-24]
-
Ahmadian, M. T.
Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
-
Ahmadian-Attari, Mahmoud
Multilevel Input Ring-Tcm Coding Scheme: a Method for Generating High-Rate Codes [Volume 14, Issue 3, 2001, Pages 209-214]
-
Ahmadigorji, M.
A Robust Renewable Energy Source-oriented Strategy for Smart Charging of Plug-in Electric Vehicles Considering Diverse Uncertainty Resources [Volume 36, Issue 4, 2023, Pages 709-719]
-
Ahmadikia, H.
Adaptation of Structured Grid for Supersonic and Transonic Flows [Volume 14, Issue 4, 2001, Pages 385-392]
-
Ahmadikia, Hossein
Analytical Analysis of The Dual-phase-lag Heat Transfer Equation in a Finite Slab with Periodic Surface Heat Flux (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 971-978]
-
Ahmadi Moghaddam, P.
Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
-
Ahmaditabar, K.
Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
-
Ahmadi Yazdi, Ahmad
A Two Stage Stochastic Programming Model of the Price Decision Problem in the Dual-channel Closed-loop Supply Chain [Volume 28, Issue 5, 2015, Pages 738-745]
-
Ahmadizar, F
Modeling the Trade-off between Manufacturing Cell Design and Supply Chain Design [Volume 31, Issue 4, 2018, Pages 640-647]
-
Ahmadizar, F.
A Hybrid Genetic Algorithm for Integrated Production and Distribution Scheduling Problem with Outsourcing Allowed [Volume 33, Issue 11, 2020, Pages 2285-2298]
-
Ahmadizar, F.
Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
-
Ahmadizar, F.
Energy-Conscious Common Operation Scheduling in an Identical Parallel Machine Environment [Volume 37, Issue 7, 2024, Pages 1443-1465]
-
Ahmadizar, F.
Flexible Job Shop Scheduling Problem Considering Upper Bounds for the Amount of Interruptions Between Operations and Machines Maintenance Activities [Volume 37, Issue 8, 2024, Pages 1600-1614]
-
Ahmad Jasim, H.
The Effect of Speed Humps on Highways Pavement Condition [Volume 33, Issue 5, 2020, Pages 737-743]
-
Ahmad Moazam, M.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Ahmadnejad, Javad
A MEMS Capacitive Microphone Modelling for Integrated Circuits [Volume 28, Issue 6, 2015, Pages 888-895]
-
Ahmadvand, Mehdi
Evaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 501-508]
-
Ahmadvanda, Alimohammad
Impact of Service on Customers’ Demand and Members’ Profit in Supply Chain [Volume 25, Issue 3, 2012, Pages 213-222]
-
Ahmadyfard, A. R.
Super-resolution of License-plates Using Weighted Interpolation of Neighboring Pixels from Video Frames [Volume 33, Issue 5, 2020, Pages 992-999]
-
Ahmadzadeh, M. R.
DPML-Risk: An Efficient Algorithm for Image Registration [Volume 31, Issue 11, 2018, Pages 1862-1869]
-
Ahmadzadehtalatapeh, Mohammad
Energy Conservation Potential of the Heat Pipe Heat Exchangers: Experimental Study and Predictions [Volume 25, Issue 3, 2012, Pages 193-200]
-
Ahmadzadehtalatapeh, Mohammad
Fully Fresh Air Air-conditioning System Equipped with Double Heat Pipe Based Heat Recovery Technology [Volume 26, Issue 1, 2013, Pages 51-58]
-
Ahmadzadehtalatapeh, Mohammad
Performance Study of a Solar Integrated Central Heating System of a Residential Building Using Trnsys- an Hourly Simulation Model (RESEARCH NOTE) [Volume 27, Issue 3, 2014, Pages 457-466]
-
Ahmed, Ehsan
Finite Element Prediction of the Behavior of Profiled Steel Sheet Dry Board Folded Plate Structures an Improved Model (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 21-32]
-
Ahmed, Foez
A Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets [Volume 29, Issue 8, 2016, Pages 1087-1093]
-
Ahmed, Mohammed Altaf
Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
-
Ahmed, S.
Prediction of Fluid Flow and Heat Transfer Characteristics Behind a Single Backward-Facing Step [Volume 5, Issue 1, 1992, Pages 61-68]
-
Ahmed, S.
A Numerical Study on Mixing of Transverse Injection in Supersonic Combustor [Volume 17, Issue 1, 2004, Pages 85-98]
-
Ahmed, S. T.
Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies [Volume 35, Issue 10, 2022, Pages 2007-2017]
-
Ahmed Al-dujaili, M. A.
Optimizing the Properties of Metakaolin-based (Na, K)-Geopolymer Using Taguchi Design Method [Volume 33, Issue 4, 2020, Pages 631-638]
-
Ahmed G. M., F.
Control of Nozzle Flow Using Microjets at Supersonic Mach Regime [Volume 32, Issue 7, 2019, Pages 991-998]
-
Ahmed Naqash, J.
Effect of Antifreeze Admixtures on Cold Weather Concrete [Volume 32, Issue 3, 2019, Pages 366-372]
-
Ahmed Naqash, J.
Experimental Study on TGA, XRD and SEM Analysis of Concrete with Ultra-fine Slag (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 679-684]
-
Ahmed Naqash, J.
Effect of Alccofine on Mechanical and Durability Index Properties of Green Concrete (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 813-819]
-
Ai, Z.
Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks [Volume 33, Issue 11, 2020, Pages 2416-2424]
-
Aiadi, K. E.
Experimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr4+:YAG Saturable Absorber [Volume 31, Issue 11, 2018, Pages 1870-1875]
-
Ait abbas, Hamou
Optimizing DC Microgrid Systems for Efficient Electric Vehicle Battery Charging in Ain El Ibel, Algeria [(Articles in Press)]
-
Ait Abbas, H.
Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
-
Ajabshirchy, Y.
Investigation of the Effect of Exhaust Gas Recirculation (EGR) on pollutants Emission From Si Engine Exhaust Gasese (RESEARCH NOTES) [Volume 11, Issue 2, 1998, Pages 115-120]
-
Ajabshirchy, Y.
The Theoretical and Experimental Investigation of the Effect of Variation of Thermodynamical Parameters of Egr fluid on No Emissions in S I Engines [Volume 14, Issue 3, 2001, Pages 273-273]
-
Ajam, A.
Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
-
Ajam, H.
Sensitivity Analysis of Parameter Hanges in Nonlinear Hydraulic Control Systems (RESEARCH NOTE) [Volume 18, Issue 3, 2005, Pages 239-252]
-
AJAY, KETAN
Performance Evaluation of Nanofluid (Al2O3/H2O-C2H6O2) Based Parabolic Solar Collector Using Both Experimental and CFD Techniques [Volume 29, Issue 4, 2016, Pages 572-580]
-
A. Jeddi, A. A.
The Influence of Machine Parameters on the Properties of Double Jersey Knitted Fabrics [Volume 8, Issue 1, 1995, Pages 37-48]
-
A. Jeddi, A. A.
Studies Into the Omission of Take-Down Tension System in Circular Kniting Machanes (TECHNICAL NOTE) [Volume 9, Issue 4, 1996, Pages 231-233]
-
A. Jeddi, A. A.
a Comparative Theoretical Analysis for a Knitted Loop Model [Volume 12, Issue 1, 1999, Pages 39-44]
-
A. Jeddi, A. A.
The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
-
Ajemba, Regina
Nitric Acid-activated Nteje Clay: Structural and Bleaching Properties (RESEARCH NOTE) [Volume 26, Issue 5, 2013, Pages 495-500]
-
Ajemba, Regina
Adsorption of Malachite Green from Aqueous Solution using Activated Ntezi Clay: Optimization, Isotherm and Kinetic Studies [Volume 27, Issue 6, 2014, Pages 839-854]
-
Ajezi-Sardroud, F.
Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
-
Ajezi-Sardroud, R.
Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
-
Ajiriyanto, M. K.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Akbar, F. R.
Effect of Wire Pitch on Capacity of Single Staggered Wire and Tube Heat Exchanger Using Computational Fluid Dynamic Simulation [Volume 33, Issue 8, 2020, Pages 1637-1642]
-
Akbar Ghafouri Rokn Abadi, Ali
Constrained Model Predictive Control of Low-power Industrial Gas Turbine [Volume 30, Issue 2, 2017, Pages 207-214]
-
Akbari, G. H.
Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying [Volume 33, Issue 9, 2020, Pages 1759-1765]
-
Akbari, G. H.
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Akbari, G. H.
Prediction of Hardness of Copper-based Nanocomposites Fabricated by Ball-milling using Artificial Neural Network [Volume 36, Issue 10, 2023, Pages 1932-1941]
-
Akbari, Gholamhosein
Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
-
Akbari, Gholam Hossein
Comparison of Mechanical Behavior and Microstructure of Continuous Cast and Hot Worked CuZn40Al1 Alloy (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 249-256]
-
Akbari, Jalal
Evaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 501-508]
-
Akbari, M.
Single-vehicle Run-off-road Crash Prediction Model Associated with Pavement Characteristics [Volume 33, Issue 7, 2020, Pages 1375-1386]
-
Akbari, M.
An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
-
Akbari, Mehdi
An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
-
Akbari Alashti, Reza
Large Deflection Analysis of Compliant Beams of Variable Thickness and Non-Homogenous Material under Combined Load and Multiple Boundary Conditions [Volume 25, Issue 4, 2012, Pages 353-362]
-
Akbarib, E.
Outlier Detection in Test Samples using Standard Deviation and Unsupervised Training Set Selection [Volume 36, Issue 1, 2023, Pages 119-129]
-
Akbari Foroud, Asghar
Discrimination of Power Quality Distorted Signals Based on Time-frequency Analysis and Probabilistic Neural Network [Volume 27, Issue 6, 2014, Pages 881-888]
-
Akbari-Kasgari, M.
A Closed-loop Supply Chain Network Design Problem in Copper Industry [Volume 33, Issue 10, 2020, Pages 2008-2015]
-
Akbarnezhad, S
Eulerian Lagrangian Simulation of Particle Capture and Dendrite Formation on Binary Fibers [Volume 31, Issue 7, 2018, Pages 1004-1011]
-
Akbarpour, Hosna
Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
-
Akbarpour, N.
New Approaches in Meta-heuristics to Schedule Purposeful Inspections of Workshops in Manufacturing Supply Chains [Volume 33, Issue 5, 2020, Pages 833-840]
-
AkbarpourShirazi, Mohsen
An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
-
Akbarzade, S.
Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
-
Akbarzadeh, F.
A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
-
Akbarzadeh, H.
Investigation of Melting by Molecular Dynamics Simulation [Volume 8, Issue 2, 1995, Pages 85-94]
-
Akbarzadeh, M
A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings [Volume 31, Issue 5, 2018, Pages 792-798]
-
Akbarzadeh, Z.
A Hybrid Fuzzy Multi-criteria Decision Making Model Based on Fuzzy DEMATEL with Fuzzy Analytical Network Process and Interpretative Structural Model for Prioritizing LARG Supply Chain Practices [Volume 32, Issue 3, 2019, Pages 413-423]
-
Akbarzadeh Jelodar, Rohollah
Hierarchical Control Strategy of CPL-based DC MGs using a New DAPI Secondary Controller [(Articles in Press)]
-
Akbarzadeh-T, M. R.
Cooperative Co-Evolving Neural Networks for Robosoccer Simulation [Volume 18, Issue 2, 2005, Pages 207-218]
-
Akgerman, A
Dispersion Coefficients of Supercritical Fluid in Fixed Beds [Volume 13, Issue 1, 2000, Pages 1-14]
-
Akhair, S. H. M
Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
-
A. Khankahdani, F.
Effect of Acidic Environments Containing Hydrochloric Acid on Rubberized Concrete [Volume 36, Issue 12, 2023, Pages 2198-2206]
-
Akhavan, Azam
An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids [Volume 33, Issue 1, 2020, Pages 28-33]
-
Akhavan, B.
Micro-structural Deformation Field Analysis of Aluminum Foam using Finite Element Method and Digital Image Correlation [Volume 33, Issue 10, 2020, Pages 2065-2078]
-
Akhavan, M.
Quenching Effect on the Pb-Substituted Bi-Based Bulk Ceramic Superconductors [Volume 11, Issue 1, 1998, Pages 21-28]
-
Akhavan, R.
The Effects of Potassium Promoter on the Syngas Conversion of Cobalt Catalysts (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 285-293]
-
Akhavan Behabadi, M.A.
Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
-
Akhbari Varkani, Mohsen
A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
-
Akhlaghi, Mohammad Mahdi
Energy and Exergy Analysis of Air PV/T Collector of Forced Convection with and without Glass Cover [Volume 26, Issue 8, 2013, Pages 913-926]
-
Akhlaghi, N.
Potential Applications of Ginger Rhizomes as a Green Biomaterial: A Review [Volume 36, Issue 2, 2023, Pages 372-383]
-
Akhlaghi, Neda
Hemp Fibres as Novel Green Support Material for Immobilization of Acidithiobacillus ferrooxidans [Volume 32, Issue 9, 2019, Pages 1225-1230]
-
Akhlaghian, Faranak
Fe/TiO2 Catalyst for Photodegradation of Phenol in Water [Volume 28, Issue 4, 2015, Pages 499-506]
-
Akhlaghi Modiri, F.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Akhondizadeh, M.
Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
-
Akhondizadeh, M.
Hopper Wall Simulation in ANSYS to Determine Displacement Due to Single Ball Impact [Volume 32, Issue 1, 2019, Pages 171-176]
-
Akhondizadeh, Mehdi
Dynamic Analysis of A Three-Rotor Flexible Coupling with Angular Misalignment [Volume 24, Issue 2, 2011, Pages 155-164]
-
Akhondizadeh, Mehdi
A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
-
Akhondizadeh, Mehdi
Effect of Material Wet on Silo Obstruction Solution by Impact (TECHNICAL NOTE) [Volume 29, Issue 11, 2016, Pages 1628-1634]
-
Akhoondian, Behnam
Laminar Flame Speed Prediction in Lean Mixture of Aluminum Dust Clouds by Considering the Effect of Random Distribution of Particles in Two-dimension [Volume 29, Issue 2, 2016, Pages 246-254]
-
Akhtari, Ali Akbar
Flow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend [Volume 29, Issue 1, 2016, Pages 14-22]
-
Akhtarpour, A.
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Akhtarpour, A.
Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam [Volume 37, Issue 5, 2024, Pages 1036-1049]
-
Akram, Muhammad
Analysis of Packet Loss and Latency Control for Robust IPTV over Mobile WiMAX and LTE Assessment (RESEARCH NOTE) [Volume 26, Issue 3, 2013, Pages 229-240]
-
Alabdali, Z. N.
Analysis of Particle Size in Composite Materials Using Image Processing [Volume 37, Issue 4, 2024, Pages 579-587]
-
Alaeddini, Adel
EFFECT OF LOCATION OF EXPLANATORY VARIABLE ON MONITORING POLYNOMIAL QUALITY PROFILES [Volume 25, Issue 2, 2012, Pages 131-140]
-
Alaei, Reza
Selecting Efficient Service-providers in Electric Power Distribution Industry Using Combinatorial Reverse Auction [Volume 30, Issue 9, 2017, Pages 1342-1351]
-
Alaei, Saeed
Designing of Supply Chain Coordination Mechanism with Leadership Considering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1888-1896]
-
Alagappan, N.
Performance Investigation of 405 Stainless Steel Thermosyphon using Cerium (IV) Oxide Nano Fluid [Volume 30, Issue 4, 2017, Pages 575-581]
-
Alam, M.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
Alam, Md.
Analysis of Magneto-hydrodynamics Jeffery-Hamel Flow with Nanoparticles by Hermite-Padé Approximation [Volume 28, Issue 4, 2015, Pages 599-607]
-
ALAM, AFTAB
Hydromagnetic Instability of Stratified Rivlin-Ericksen Fluid in Porous Medium in the Presence of Suspended Particles [Volume 22, Issue 3, 2009, Pages 287-294]
-
Alamatian, javad
A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads [Volume 24, Issue 4, 2011, Pages 341-350]
-
Alamdar, H.
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Alamdar Yazdi, A.
Evaluation of the Shearing Properties of Woven Fabrics: Rated Force [Volume 15, Issue 4, 2002, Pages 406-416]
-
Alamdar Yazdi, A.
Effective Features of the Concentrated Loading Curves (Woven Fabric Objective Measurement) [Volume 16, Issue 2, 2003, Pages 197-208]
-
Alamdar Yazdi, A.
Shearing Properties of the Skewed Woven Fabrics (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 177-185]
-
Al-Ameri, A. F. I.
Vertical and Lateral Displacement Response of Foundation to Earthquake Loading [Volume 33, Issue 10, 2020, Pages 1864-1871]
-
Alamian, R.
Experimental Assessment of a Fixed On-Shore Oscillating Water Column Device: Case Study on Oman Sea [Volume 33, Issue 3, 2020, Pages 494-504]
-
Alamian, R.
Numerical Simulation of Hydrodynamic Properties of Alex Type Gliders [Volume 33, Issue 7, 2020, Pages 1387-1396]
-
Alamian, R.
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
-
Alamian, Rezvan
Experimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter [Volume 29, Issue 9, 2016, Pages 1292-1299]
-
Alan, M P.N
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Al-ani, B. R. K.
A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
-
Al-Ani, M. S.
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Alasty, Aria
Trajectory Tracking of a Mobile Robot Using Fuzzy Logic Tuned by Genetic Algorithm (TECHNICAL NOTE) [Volume 19, Issue 1, 2006, Pages 95-104]
-
Alasvand Zarasvand, K.
Investigating the Effects of Cold Bulge Forming Speed on Thickness Variation and Mechanical Properties of Aluminum Alloys: Experimental and Numerical [Volume 31, Issue 9, 2018, Pages 1602-1608]
-
Alavi, A.
Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
-
Alavi, Erfan
Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls [Volume 22, Issue 4, 2009, Pages 343-356]
-
Alavi, Mohammad
Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE) [Volume 29, Issue 7, 2016, Pages 962-967]
-
Alavi Fazel, S. A.
Pool Boiling Heat Transfer in Water/Amines Solutions [Volume 21, Issue 2, 2008, Pages 113-131]
-
Alavi Gharahbagh, A
Improved Content Aware Image Retargeting Using Strip Partitioning [Volume 31, Issue 5, 2018, Pages 684-692]
-
Alaviyan, M.
Full Characterization of Sarcheshmeh and Khatoon-Abad Copper Anode Slimes: Characterization Impact on the Decopperization Operation [Volume 36, Issue 5, 2023, Pages 934-945]
-
Albarghooth, A.
Earth-to-air Heat Exchanger for Cooling Applications in a Hot and Dry Climate: Numerical and Experimental Study [Volume 36, Issue 1, 2023, Pages 78-89]
-
Al-Bayati, A. W.
Experimental Work on the Effect of Under-reamed Pile Geometry on the Pullout Capacity of Sand [Volume 36, Issue 9, 2023, Pages 1645-1651]
-
Al-bosham, A.
Optimal Node Selection for Cooperative Spectrum Sensing in Cognitive Radio Sensor Networks with Energy Harvesting [Volume 37, Issue 5, 2024, Pages 833-841]
-
Al-Bugharbee, H.
An Experimental Investigation of Enclosure’s Effect on Noise Reduction in Portable Generators (Technical Note) [Volume 33, Issue 2, 2020, Pages 350-356]
-
Al-Dabbagh Hossein, M.
A Novel Fuzzy and Artificial Neural Network Representation of Overcurrent Relay Characteristics [Volume 16, Issue 3, 2003, Pages 233-246]
-
Al-Dahawi, A. M.
Use of Waste Materials for Sustainable Development of Rigid Pavement [Volume 36, Issue 10, 2023, Pages 1919-1931]
-
Al-Dahawi, A. M.
A Novel Way of Using Ground Granulated Blast Furnace Slag and Steel Shaving Fibers for Production of Sustainable and Smart Rigid Pavement [Volume 37, Issue 8, 2024, Pages 1622-1638]
-
Al-dujaili, M. A. Ahmed
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Ale Ahmad, A
The Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method [Volume 31, Issue 2, 2018, Pages 307-314]
-
Ale Ahmad, A.
A New Variable Frequency Zero Voltage Switching Control Method for Boost Converter Operating in Boundary Conduction Mode [Volume 33, Issue 11, 2020, Pages 2222-2232]
-
Ale Ebrahim, H.
a New Approximate Solution Technique (Quantized Method) for Simultaneous Gas Solid Reactions [Volume 9, Issue 4, 1996, Pages 181-188]
-
Aleksander G., P.
Predicting Service Life of Polyethylene Pipes under Crack Expansion using "Random Forest" Method [Volume 36, Issue 12, 2023, Pages 2243-2252]
-
Alemi-Rostami, M.
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Alemzad, H.
Quality Improvement Through Multiple Response Optimization (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 49-58]
-
Alemzadeh, I
Conjugated Linoleic Acid Production and Optimization Via Catalytic Reaction Method Using Safflower Oil [Volume 31, Issue 8, 2018, Pages 1166-1171]
-
Alemzadeh, Iran
Sucrose Inversion by Saccharomyces Yeast Cells Immobilized on to Corn Grits [Volume 2, Issue 3, 1989, Pages 84-87]
-
Alemzadeh, Iran
Treatment of Dairy Wastewater Using Pilot Scale Tricking Filter [Volume 5, Issue 3, 1992, Pages 77-80]
-
Alemzadeh, Iran
The Mechanism of Chromium Biosorption by Saccharomyces Cerevisiae [Volume 10, Issue 3, 1997, Pages 121-126]
-
Alemzadeh, Iran
Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
-
Alemzadeh, Iran
Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 1-8]
-
Alemzadeh, Iran
Some Investigation on Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 45-53]
-
Alemzadeh, Iran
Optimization of HFDS Production from Date Syrup (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 127-134]
-
Alemzadeh, Iran
A Study on Plant Polymer: Pectin Production and Modification (RESEARCH NOTE) [Volume 23, Issue 2, 2010, Pages 107-114]
-
Alemzadeh, Iran
Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
-
Alemzadeh, Iran
Optimization of Lipase Immobilization [Volume 25, Issue 1, 2012, Pages 1-10]
-
Alemzadeh, Iran
Encapsulation of Peppermint Oil with Arabic Gum-gelatin by Complex Coacervation Method [Volume 26, Issue 8, 2013, Pages 807-814]
-
Alemzadeh, Iran
Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]
-
Alemzadeh, Iran
Lipase Catalyzed Incorporation of Conjugated Linoleic Acid by Transesterification into Sunflower Oil Applying Immobilized Lipase (Lipozyme Thermomyces lanuginosus and Rhizomucor mehei) [Volume 29, Issue 4, 2016, Pages 436-443]
-
Alemzadeh, Iran
Acrylamide Reduction in Potato Crisps using: Asparaginase from Candida utilis, Commercial Asparaginase, Salt Immersion, and pH Treatment [Volume 29, Issue 7, 2016, Pages 879-886]
-
Alemzadeh, Iran
Encapsulation of Food Components and Bioactive Ingredients and Targeted Release [Volume 33, Issue 1, 2020, Pages 1-11]
-
Alfatlawi, T. J.M.
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Alferjani, Marwan
Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
-
Alfi, Alireza
Constrained Nonlinear Optimal Control via a Hybrid BA-SD [Volume 25, Issue 3, 2012, Pages 197-204]
-
Al-Gasham, T. S.
Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
-
Al-Gasham, T. S.
Evaluation of lightweight Concrete Core Test Including Steel Bars [Volume 36, Issue 6, 2023, Pages 1121-1128]
-
Al-Gharbawi, A. S. A.
Effect of Carbonation on the Collapse Potential of Magnesium Oxide Treated Gypseous Soil [Volume 35, Issue 4, 2022, Pages 706-714]
-
Al-Gharrawi, A. M. B.
Collapse Problem Treatment of Gypseous Soil by Nanomaterials [Volume 33, Issue 9, 2020, Pages 1737-1742]
-
Algie, S.H.
Solidification in Copper Continuously Cast in Graphite Moulds [Volume 2, Issue 3, 1989, Pages 132-143]
-
Al-Haidari, H. S.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Al Hassan, Md. Rahat
Synthesis and Characterization of Porcelain Body Developed from Rice Husk Ash (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 25-31]
-
Alhassani, A. M.J.
Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil [Volume 34, Issue 8, 2021, Pages 1940-1948]
-
Alhassani, M. H
Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
-
Al-Haydari, I. S.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Al-Haydari, I. S.
Sustainable Use of Polypropylene Fibers as a Cement Mortar Reinforcement [Volume 35, Issue 8, 2022, Pages 1494-1500]
-
Al Hazza, M. H. F
Developing of Corrosion Resistance Nano Copper Oxide Coating on Copper using Anodization in Oxalate solution [Volume 31, Issue 3, 2018, Pages 450-455]
-
Al-Hindawi, L. A. A.
Use of Waste Materials for Sustainable Development of Rigid Pavement [Volume 36, Issue 10, 2023, Pages 1919-1931]
-
Al-Hindawi, L. A. A.
A Novel Way of Using Ground Granulated Blast Furnace Slag and Steel Shaving Fibers for Production of Sustainable and Smart Rigid Pavement [Volume 37, Issue 8, 2024, Pages 1622-1638]
-
Al-Hydary, I. A. Disher
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Ali, A. H.
Behavior of Raft Foundation Built on Layered Soil under Different Earthquake Excitation [Volume 35, Issue 8, 2022, Pages 1509-1515]
-
Ali, A. Y.
Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
-
Ali, D. H.
Numerical Analysis of Stress Distribution During Tunneling in Clay Stone Rock [Volume 33, Issue 8, 2020, Pages 1472-1478]
-
Ali, I.
Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile [Volume 21, Issue 3, 2008, Pages 291-302]
-
Ali, I.
An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption [Volume 22, Issue 1, 2009, Pages 91-97]
-
Ali, I. F.
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Ali, I. F.
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Ali, M. A. T.
Mean Velocity and Static Pressure in a Sharp-edge Circular Nozzle Jet [Volume 12, Issue 2, 1999, Pages 87-98]
-
Ali, R
Biodiesel Production via Transesterification of Low Grade Cooking Oil over Heterostructure Nano Particles of Ni/Mg/Al2O3 Catalyst [Volume 31, Issue 8, 2018, Pages 1318-1325]
-
Aliabadian, A.
Optimal Singular Value Decomposition Based Pre-coding for Secret Key Extraction from Correlated Orthogonal Frequency Division Multiplexing Sub-channels [Volume 33, Issue 7, 2020, Pages 1214-1222]
-
Aliakbari, K
The Analysis of Wheel Loader Diesel Engine Crankshaft Failure [Volume 31, Issue 3, 2018, Pages 473-479]
-
Aliakbarian, H.
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Ali Akbarian, H.
Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
-
Aliakbari Nouri, F.
Providing a Fuzzy Expert System to Assess the Maturity Level of Companies in Manufacturing Excellence in the Food Industry of Iran [Volume 30, Issue 4, 2017, Pages 532-542]
-
Alibakhshi, Reza
The Effect of Anisotropy on Free Vibration of Rectangular Composite Plates with Patch Mass [Volume 25, Issue 3, 2012, Pages 223-232]
-
Ali Bash, M. A.
Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2 [Volume 37, Issue 1, 2024, Pages 178-186]
-
Alibeigi, M.
Effect of Porous Medium Positioning on Heat Transfer of Micro-channel with Jet [Volume 33, Issue 10, 2020, Pages 2057-2064]
-
Alibeigi, S.
Preparation of Cobalt Oxide/Zinc Oxide Nanocomposite [Volume 23, Issue 2, 2010, Pages 133-138]
-
Alibeiki, ٍE.
Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
-
Alielahi, H.
An Investigation of the Seismic Interaction of Surface Foundations and Underground Cavities Using Finite Element Method [Volume 33, Issue 9, 2020, Pages 1721-1730]
-
Ali Goodarz, Mohammad Reza
Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
-
Alihosseini, A.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Alijani, Hossein
Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
-
Alijani, Hossein
Evaluation of Ductile Damage Criteria in Hot Forming Processes [Volume 29, Issue 10, 2016, Pages 1441-1449]
-
Alijani, Mohammad G. H.
Development a New Technique Based on Least Square Method to Synthesize the Pattern of Equally Space Linear Arrays [Volume 32, Issue 11, 2019, Pages 1620-1626]
-
Alikhani, H.
In-depth Investigation of Project Planning and Control Software Package Application in the Construction Industry of Iran [Volume 33, Issue 10, 2020, Pages 1817-1825]
-
Alikhani, H. A.
Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
-
Alikhanov, N. T.
Standards for Selection of Surfactant Compositions used in Completion and Stimulation Fluids [Volume 36, Issue 9, 2023, Pages 1605-1610]
-
Alim, Md. Abdul
Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
-
Alimirzaloo, V.
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process [Volume 33, Issue 2, 2020, Pages 344-349]
-
Alimirzaloo, Vali
Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method [Volume 29, Issue 2, 2016, Pages 264-273]
-
Alimirzaloo, Vali
Experimental Investigation of the Effect of Process Parameters on the Surface Roughness in Finishing Process of Chrome Coated Printing Cylinders (TECHNICAL NOTE) [Volume 29, Issue 12, 2016, Pages 1775-1782]
-
Alimirzaloo, Vali
Investigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050 [Volume 30, Issue 6, 2017, Pages 920-925]
-
Alimohammadi, Mahdiyeh
Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
-
Alimohammadi ardekani, MAjid
A Robust Two-stage Data Envelopment Analysis Model for Measuring Efficiency: Considering Iranian Electricity Power Production and Distribution Processes [Volume 29, Issue 5, 2016, Pages 646-653]
-
Alinaghian, M.
A Green Competitive Vehicle Routing Problem under Uncertainty Solved by an Improved Differential Evolution Algorithm [Volume 32, Issue 7, 2019, Pages 976-981]
-
Alinaghian, Mehdi
Introducing the Time Value of Money in a Non-consignment Vendor Managed Inventory Model [Volume 29, Issue 5, 2016, Pages 637-645]
-
Alinejad, K.
Treatability Evaluation of Municipal Wastewater and Anaerobically-Treated Industrial Effluent in a Rotating Biological Contactor [Volume 16, Issue 2, 2003, Pages 143-154]
-
Alinejad-Beromi, Y
Optimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation [Volume 31, Issue 2, 2018, Pages 299-306]
-
Alipenhani, B.
Application of Finite Element Method for Simulation of Rock Mass Caving Processes in Block Caving Method [Volume 36, Issue 1, 2023, Pages 139-151]
-
Alipour, A.
Dynamic Analysis of Moving Cables with Variable Tension and Variable Speed [Volume 23, Issue 2, 2010, Pages 157-168]
-
Alipour, F.
Steady Flow Through Modeled Glottal Constriction [Volume 7, Issue 1, 1994, Pages 13-18]
-
Alipour, M.
Integrated Order Batching and Distribution Scheduling in a Single-block Order Picking Warehouse Considering S-Shape Routing Policy [Volume 31, Issue 10, 2018, Pages 1723-1733]
-
Alisjahbana, S. W.
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Alisjahbana, S. W.
Influence of Project and Affected Local Community Interests Level on Social Conflicts in Indonesian Infrastructure Projects [Volume 35, Issue 7, 2022, Pages 1217-1226]
-
Ali Torabi, S.
A possibilistic bi-objective model for a competitive supply chain network design under variable coverage [Volume 31, Issue 9, 2018, Pages 1575-1584]
-
Alizadeh, B.
AIOSC: Analytical Integer Word-length Optimization Based on System Characteristics for Recursive Fixed-Point Linear Time Invariant Systems [Volume 33, Issue 7, 2020, Pages 1223-1230]
-
Alizadeh, B.
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Alizadeh, F.
Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
-
Alizadeh, Masoud
PHASE STABILITY AND CONDUCTIVITY OF δ-Bi2O3 WITH MIXTURE OF YTTRIUM AND YTTERBIUM OXIDES [Volume 25, Issue 2, 2012, Pages 159-164]
-
Alizadeh, Masoud
Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
-
Alizadeh, Mehdi
Improvement of the Solvent Extraction of Rhenium from Molybdenite Roasting Dust Leaching Solution using Counter-current Extraction by a Mixer-settler Extractor (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 651-658]
-
Alizadeh, Yoness
EXPERIMENTAL EVALUATION OF BLAST WAVE PARAMETERS IN UNDERWATER EXPLOSION OF HEXOGEN CHARGES [Volume 25, Issue 1, 2012, Pages 65-72]
-
Alizadeh Elizei, M. H.
Electricity Supply Model of Conventional Residential Buildings in Tehran with Priority on Renewable Energy Using Adaptive Fuzzy-neural Inference System [Volume 36, Issue 10, 2023, Pages 1793-1814]
-
AlizadehKharazi, B.
A Novel Building Information Modeling-based Method for Improving Cost and Energy Performance of the Building Envelope [Volume 33, Issue 11, 2020, Pages 2162-2173]
-
Alizadeh Kharkeshi, B.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Alizadeh Kharkeshi, B.
Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
-
Alizadeh Kharkeshi, B.
Experimental Investigation on the Effect of Flow Rate and Load on the Hydrodynamic Behavior and Performance of an Archimedes Screw Turbine [Volume 36, Issue 4, 2023, Pages 733-745]
-
Al-Jaberi, Z.
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
AL-Jaberi, L. A.
Behavior of Reinforced Geopolymer Concrete Beams under Repeated Load [Volume 37, Issue 5, 2024, Pages 974-983]
-
Aljazaeri, Z. R.
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Al-Jelawy, H. M.
Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
-
Al-Jendeel, H. A
Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
-
Al-Jubouri, S. M
Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
-
Alkalid, F. F.
Analysis of Particle Size in Composite Materials Using Image Processing [Volume 37, Issue 4, 2024, Pages 579-587]
-
Alkarkhi, A. F. M
Proposed Procedure for Estimating the Coefficient of Three-factor Interaction for 2^p 3^m 4^q Factorial Experiments (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 12-18]
-
Alkarkhi, A. F. M.
Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
-
Alkasir Farhani, M.
Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
-
Al-Khafaji, Z.
Effect of Opening Holes on the Hydraulic Performance for Crump Weir [Volume 31, Issue 12, 2018, Pages 2022-2027]
-
AL-Khafaji, G. K.
Adaptive Polynomial Coding of Multi-base Hybrid Compression [Volume 36, Issue 2, 2023, Pages 236-252]
-
Alla, R.
Performance Analysis of Bi-directional Improved Hybrid Three Quasi Z source Converter [Volume 36, Issue 7, 2023, Pages 1250-1258]
-
Allaedini, Ghazaleh
Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
-
Allahkaram, S. R.
Causes of Catastrophic Failure of High Mn Steel Utilized as Crusher Overlaying Shields (TECHNICAL NOTE) [Volume 21, Issue 1, 2008, Pages 55-64]
-
Allahyari, E
Vibration Behavior of Nanocomposite Plate Reinforced by Pristine and Defective Graphene Sheets; an Analytical Approach [Volume 31, Issue 7, 2018, Pages 1095-1102]
-
Allou, D.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Almabouada, F.
Experimental Study of a Flash-lamp Pumped Passively Q-Switched Nd:YAG Laser Using Cr4+:YAG Saturable Absorber [Volume 31, Issue 11, 2018, Pages 1870-1875]
-
Almasi, Ali
Decolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1582-1586]
-
Almasi, S. A.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Al Mesfer, M.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
Almohammad-albakkar, M.
Development of Steel Yielding Seismic Dampers Used to Improve Seismic Performance of Structures: A Comprehensive Review [Volume 36, Issue 4, 2023, Pages 746-775]
-
Al-Mozini, Abdullah
Modeling of Riyadh Sewage Treatment Plant: 1-Model Development, Verification and Simulation [Volume 22, Issue 3, 2009, Pages 211-220]
-
Al-Mutairee, H. M. K.
Effect of using Waste Rubber as Partial Replacement of Coarse Aggregate on Torsional Strength of Square Reinforced Concrete Beam [Volume 35, Issue 2, 2022, Pages 397-405]
-
Al-Mutairee, H. M. K.
Response of Rubcrete Continuous Deep Beams under Sinusoidal Loads [Volume 35, Issue 7, 2022, Pages 1307-1316]
-
Al-Mutairee, H. M. K.
Mechanical and Dynamical Properties of Structural Rubcrete Mixes [Volume 35, Issue 9, 2022, Pages 1744-1751]
-
Al-Mutaz, Ibrahim
Modeling of Riyadh Sewage Treatment Plant: 1-Model Development, Verification and Simulation [Volume 22, Issue 3, 2009, Pages 211-220]
-
AL-Naely, H.
Effect of Opening Holes on the Hydraulic Performance for Crump Weir [Volume 31, Issue 12, 2018, Pages 2022-2027]
-
Al-Neami, M. A.
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Al-Neami, M. A.
Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading [Volume 35, Issue 6, 2022, Pages 1127-1134]
-
Al-Obaedi, Jalal
Simulating the Effect of Speed Humps on the U-Turn Traffic [Volume 32, Issue 12, 2019, Pages 1773-1780]
-
Al-Obaedi, J. T. S.
Close Following Behavior: Estimation of Desired Gap Headway Using Loop Detector Data (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 661-666]
-
Al-Obaedi, J. T. S.
The Effect of Speed Humps on Highways Pavement Condition [Volume 33, Issue 5, 2020, Pages 737-743]
-
Alqaraghuli, W. A. A
Proposed Procedure for Estimating the Coefficient of Three-factor Interaction for 2^p 3^m 4^q Factorial Experiments (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 12-18]
-
Alqaraghuli, W. A. A.
Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
-
Al-Robaian, A. R. A.
On Numerical Investigation of Semi-empirical Relations Representing Local Nusselt Number at Lower Nozzle-target Spacing’s [Volume 32, Issue 1, 2019, Pages 137-145]
-
Al-Rumaithi, A.
Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
-
Al-Saadi, M. K.
Coordination of Load and Generation Sides to Reduce Peak Load and Improve Arbitrage of Smart Distribution Grid [Volume 36, Issue 2, 2023, Pages 226-235]
-
Al-Salihy, Z. A. Z.
The Effect of Speed Humps on Highways Pavement Condition [Volume 33, Issue 5, 2020, Pages 737-743]
-
Al-Salim, N. H. A.
Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete [Volume 35, Issue 8, 2022, Pages 1619-1628]
-
AlSaraj, W.
Behavior of Reinforced Geopolymer Concrete Beams under Repeated Load [Volume 37, Issue 5, 2024, Pages 974-983]
-
Alsharifi, Z.
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Alsheikhjader, M. S. H.
A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
-
Al-Sultani, S. A. J.
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Al Taan, L. M.
A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
-
Altalib, F.
The Post-fire Behavior of Lightweight Structural Concrete is Improved by Nano-SiO2 and Steel Fibers [Volume 36, Issue 11, 2023, Pages 1942-1960]
-
Al-Tememy, M. S.
Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading [Volume 35, Issue 6, 2022, Pages 1127-1134]
-
Alvanchi, A.
In-depth Investigation of Project Planning and Control Software Package Application in the Construction Industry of Iran [Volume 33, Issue 10, 2020, Pages 1817-1825]
-
Alvanchi, A.
A Novel Building Information Modeling-based Method for Improving Cost and Energy Performance of the Building Envelope [Volume 33, Issue 11, 2020, Pages 2162-2173]
-
Alvanchi, A.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Alvandi, R.
A Time-Domain Method for Shape Reconstruction of a Target with Known Electrical Properties (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 43-48]
-
Alviri, M.
Low Embodied Carbon and Energy Materials in Building Systems: A Case Study of Reinforcing Clay Houses in Desert Regions [Volume 36, Issue 8, 2023, Pages 1409-1428]
-
Alwash, N. A.
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
AlyanNezhadi, M. M.
A New High Frequency Grid Impedance Estimation Technique for the Frequency Range of 2 to150 kHz [Volume 31, Issue 10, 2018, Pages 1666-1674]
-
AlyanNezhadi, M. M.
Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
-
AlyanNezhadi, M. M.
Gait Recognition based on Measurements of Moving Human Legs Angles [Volume 33, Issue 5, 2020, Pages 975-983]
-
AlyanNezhadi, M. M.
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Al-Zuheriy, A. S. J.
An Experimental Study to Predict a New Formula for Calculating the Deflection in Wide Concrete Beams Reinforced with Shear Steel Plates [Volume 36, Issue 2, 2023, Pages 360-371]
-
Al-Zuheriy, A. S. J.
Integrating Building Information Modeling and Virtual Reality to Develop Real-time Suitable Cost Estimates using Building Visualization [Volume 36, Issue 5, 2023, Pages 858-869]
-
Al-Zuheriy, A. S. J.
Experimental Study to Evaluate Antisymmetric Reinforced Concrete Deep Beams with Openings under Concentrated Loading Using Strut and Tie Model [Volume 36, Issue 12, 2023, Pages 2272-2283]
-
Al-Zuheriy, A. S. J.
A Novel Way of Using Ground Granulated Blast Furnace Slag and Steel Shaving Fibers for Production of Sustainable and Smart Rigid Pavement [Volume 37, Issue 8, 2024, Pages 1622-1638]
-
Amal, M. I
Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 622-628]
-
Amani, H.
Experimental Investigations on Behaviour of Rhamnolipid Biosurfactant as a Green Stabilizer for the Biological Synthesis of Gold Nanoparticles [Volume 33, Issue 6, 2020, Pages 1054-1060]
-
Amani, T.
Treatment of Wastewater Containing Carbohydrates using Pichia Saitoi Culture [Volume 17, Issue 3, 2004, Pages 209-218]
-
Amani Dashlejeh, A.
Effects of Radial Imperfection on the Load Capacity of Round HSS Columns [Volume 32, Issue 1, 2019, Pages 36-45]
-
Amanifard, Nima
A Composite Finite Difference Scheme for Subsonic Transonic Flows (RESEARCH NOTE). [Volume 10, Issue 1, 1997, Pages 37-44]
-
Amanifard, Nima
Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
-
Amanifard, Nima
A 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade- Length Approach in an Axial Compressor [Volume 16, Issue 1, 2003, Pages 81-90]
-
Amanifard, Nima
A Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor [Volume 16, Issue 2, 2003, Pages 171-182]
-
Amanifard, Nima
Stall Vortex Shedding over a Compressor Cascade (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 9-16]
-
Amanifard, Nima
Stall Vortex Shedding Over a Compressor Cascade (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 29-36]
-
Amanifard, Nima
Presenting a Modified SPH Algorithm for Numerical Studies of Fluid-Structure Interaction Problems [Volume 20, Issue 2, 2007, Pages 167-178]
-
Amanifard, Nima
Modeling and Multi-Objective Optimization of Stall Control on NACA0015 Airfoil with a Synthetic Jet using GMDH Type Neural Networks and Genetic Algorithms [Volume 22, Issue 1, 2009, Pages 69-88]
-
Amanifard, Nima
A High-Velocity Impact Simulation using SPH-Projection Method [Volume 22, Issue 4, 2009, Pages 359-368]
-
Amanifard, Nima
A MODIFIED COMPRESSIBLE SMOOTHED PARTICLE HYDRODYNAMICS (MCSPH) METHOD AND ITS APPLICATION ON THE NUMERICAL SIMULATION OF LOW AND HIGH VELOCITY IMPACTS [Volume 25, Issue 1, 2012, Pages 45-58]
-
Amanifard, Nima
Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm [Volume 25, Issue 3, 2012, Pages 239-248]
-
Amanifard, Nima
Using Neural Networks and Genetic Algorithms for Modelling and Multi-objective Optimal Heat Exchange through a Tube Bank [Volume 25, Issue 4, 2012, Pages 321-326]
-
Amanifard, Nima
Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method [Volume 26, Issue 4, 2013, Pages 341-350]
-
Amanifard, Nima
Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH) [Volume 26, Issue 5, 2013, Pages 515-522]
-
Amanifard, Nima
Flow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach [Volume 26, Issue 7, 2013, Pages 761-770]
-
Amanifard, Nima
Numerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel [Volume 26, Issue 7, 2013, Pages 771-780]
-
Amelsakhi, M.
Plastic Properties and Collapse Investigation of Fine-grained Soil Rehabilitated with Styrene Butadiene Rubber: A Case Study in Kerman, Iran [Volume 36, Issue 10, 2023, Pages 1746-1757]
-
Ameri, M.
Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
-
Ameri, M. A.
Control of Engineering Properties of Asphalt Concrete Based on Permanent Deformation Constraint of Subgrade at Tropical Zones in Iran (TECHNICAL NOTE) [Volume 14, Issue 3, 2001, Pages 195-200]
-
Ameri, Maede
Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
-
Ameri, Mehran
Effects of Directional Subdividing on adaptive Grid-Embedding (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 71-78]
-
Ameur, H.
Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
-
AMGHAR, Mustapha
Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
-
Amid, M.
Functionalized Halloysite Nanotubes and Graphene Oxide Nanosheets Fillers Incorporated in UF Membranes for Oil/Water Separation [Volume 36, Issue 7, 2023, Pages 1201-1210]
-
Amid, M.
Application of Polyvinyl Chloride- Halloysite Nanotubes/Uio66-NH2 Mixed Matrix Membranes in Separation of Sunflower Oil from Water [Volume 37, Issue 9, 2024, Pages 1736-1745]
-
Amidpour, M.
Various Approaches to Thermodynamic Optimization of a Hybrid Multi-effect Evaporation with Thermal Vapour Compression and Reverse Osmosis Desalination System Integrated to a Gas Turbine Power Plant [Volume 32, Issue 5, 2019, Pages 777-789]
-
Amin, Mohammad Hassan
Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity [Volume 21, Issue 2, 2008, Pages 109-116]
-
Aminayi, Payam
Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
-
Amine, A
Comparison of Inventory Models for Optimal Working Capital; Case of Aeronautics Company [Volume 31, Issue 4, 2018, Pages 605-611]
-
Aminfar, Mohammad Hosein
Experimental and Numerical Modeling of the Effect of Groundwater Table Lowering on Bearing Capacity of Shallow Square Footings [Volume 32, Issue 10, 2019, Pages 1429-1436]
-
Amini, A.
Predicting the Empirical Distribution of Video Quality Scores Using Recurrent Neural Networks [Volume 33, Issue 5, 2020, Pages 984-991]
-
Amini, B.
The Influence of Urban Network Features on the Quality of Traffic Service (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 167-174]
-
Amini, Behnaz
The Effect of Normal Anisotropy on Thin-Walled Tube Bending [Volume 26, Issue 1, 2013, Pages 83-90]
-
Amini, J.
Kohonen Self Organizing for Automatic Identification of Cartographic Objects [Volume 15, Issue 2, 2002, Pages 109-116]
-
Amini, M.
Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
-
Amini, Malihe
Phosphorus Removal from Dairy Wastewater in Batch Systems under Simultaneous Aerobic/Anaerobic Conditions: Application of Response Surface Methodology [Volume 28, Issue 6, 2015, Pages 855-863]
-
Amini, Morteza
Failure Probability and Remaining Life Assessment of Reheater Tubes [Volume 26, Issue 5, 2013, Pages 543-552]
-
Amini, S. Mohammad
Molecular Dynamics Simulation of Potassium Chloride Melting(.I. Microcrystal Simulation and Sample Size Effect) [Volume 2, Issue 1, 1989, Pages 5-13]
-
Amini, S. Mohammad
Molecular Dynamics Simulation of Potassium Chloride Melting (II. Constant Volume and Constant Pressure Simulation of Filled System) [Volume 2, Issue 1, 1989, Pages 15-24]
-
Amini, S. Mohammad
Investigation of Melting by Molecular Dynamics Simulation [Volume 8, Issue 2, 1995, Pages 85-94]
-
Aminian Modarres, A.
Investigating The Effects of Modem Electromagnetic Waves (2.4 GHz) on Electroencephalogram [Volume 32, Issue 8, 2019, Pages 1155-1162]
-
Aminian-Modarres, Amir
A Blind Hammerstein Diversity Combining Technique for Flat Fading Channels [Volume 26, Issue 3, 2013, Pages 277-288]
-
Amini Mashhadi, Hossein
Effect of Composition and MnS Addition on Microstructure and Mechanical Properties of Powder Forged Copper Steel Parts [Volume 17, Issue 1, 2004, Pages 81-94]
-
Amin Jarrahi, M.
Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
-
Aminmahalati, A.
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Amin Mousavi, S. A.
A New Method for Open Government using of Information Technology [Volume 35, Issue 3, 2022, Pages 493-501]
-
Amin Naseri, M.R.
Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
-
Amin Naseri, M.R.
A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
-
Amin-Naseri, M. R.
Coordination of Pricing and Order Quantity for Two Replaceable and Seasonal Products [Volume 33, Issue 3, 2020, Pages 439-447]
-
Aminnayeri, M.
Change Point Estimation of the Stationary State in Auto Regressive Moving Average Models, Using Maximum Likelihood Estimation and Singular Value Decomposition-based Filtering [Volume 32, Issue 5, 2019, Pages 726-736]
-
Amin-Tahmasbi, H.
Optimization of a Bi-objective Scheduling for Two Groups of Experienced and Inexperienced Distribution Staff Based on Capillary Marketing [Volume 31, Issue 11, 2018, Pages 1943-1952]
-
Aminy, M.
Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
-
Aminzadeh, M.
Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
-
Amirabadi, H.
Design of Broaching Tool Using Finite Element Method for Achieving the Lowest Residual Tensile Stress in Machining of Ti6Al4V Alloy [Volume 33, Issue 4, 2020, Pages 657-667]
-
Amirabadi, H.
Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]
-
Amirabedia, M.
Experimental Comparison the Effect of Mn2O3 and Co3O4 Nano Additives on the Performance and Emission of SI Gasoline Fueled with Mixture of Ethanol and Gasoline [Volume 32, Issue 5, 2019, Pages 769-776]
-
Amirahmadi, M.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Amirahmadi, M.
Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
-
Amirahmadi, M.
Challenges of Generation and Transmission Expansion Planning Considering Power System Resilience and Provide Solutions [Volume 36, Issue 5, 2023, Pages 824-841]
-
Amirahmadi, M.
Market-based Real Time Congestion Management in a Smart Grid Considering Reconfiguration and Switching Cost [Volume 36, Issue 5, 2023, Pages 842-857]
-
Amirataee, Babak
Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
-
AmirFazli, A.
The lterative Nature of the Engineering Design Process: a Telescopic Revision Model (RESEARCH NOTE) [Volume 7, Issue 1, 1994, Pages 57-60]
-
Amiri, A
Project Scheduling with Simultaneous Optimization, Time, Net Present Value, and Project Flexibility for Multimode Activities with Constrained Renewable Resources [Volume 31, Issue 5, 2018, Pages 780-791]
-
Amiri, A.
The Effect of Measurement Errors on the Performance of Variable Sample Size and Sampling Interval Control Chart [Volume 30, Issue 7, 2017, Pages 995-1004]
-
Amiri, A.
Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
-
Amiri, A.
Data Consumption Analysis by Two Ordinal Multivariate Control Charts [Volume 35, Issue 11, 2022, Pages 2196-2204]
-
Amiri, A.
A Robust Control Chart for Monitoring Autocorrelated Multiple Linear Profiles in Phase I [Volume 36, Issue 8, 2023, Pages 1429-1439]
-
Amiri, A.
Enhancing Fault Detection in Image Analysis: A Combined Wavelet-Fourier Technique for Advancing Manufacturing Quality Control [Volume 37, Issue 2, 2024, Pages 387-401]
-
Amiri, Ahad
Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
-
Amiri, Ahad
Size-dependent Vibration and Instability of Magneto-electro-elastic Nano-scale Pipes Containing an Internal Flow with Slip Boundary Condition [Volume 29, Issue 7, 2016, Pages 995-1004]
-
Amiri, Amirhossein
Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
-
Amiri, Amirhossein
Process Capability Index for Logistic Regression Profile Based on Spmk Index [Volume 28, Issue 8, 2015, Pages 1186-1192]
-
Amiri, Amirhossein
Simultaneous Monitoring of Multivariate Process Mean and Variability in the Presence of Measurement Error with Linearly Increasing Variance under Additive Covariate Model (RESEARCH NOTE) [Volume 29, Issue 4, 2016, Pages 514-523]
-
Amiri, Amirhossein
A Self-starting Control Chart for Simultaneous Monitoring of Mean and Variance of Simple Linear Profiles [Volume 29, Issue 9, 2016, Pages 1263-1272]
-
Amiri, Amirhossein
Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
-
Amiri, F.
Instrumentation Readings versus Numerical Analysis of Taham Dam [Volume 32, Issue 1, 2019, Pages 28-35]
-
Amiri, I.
Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
-
Amiri, Maghsood
Solving a Redundancy Allocation Problem by a Hybrid Multi-objective Imperialist Competitive Algorithm [Volume 26, Issue 9, 2013, Pages 1031-1042]
-
Amiri, Saeed
Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
-
Amiri, Z.
Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
-
Amirian, Homa
Multi-objective Differential Evolution for the Flow shop Scheduling Problem with a Modified Learning Effect [Volume 27, Issue 9, 2014, Pages 1395-1404]
-
Amiri-Aref, Mehdi
A Facility Location Problem with Tchebychev Distance in the Presence of a Probabilistic Line Barrier [Volume 25, Issue 4, 2012, Pages 293-302]
-
Amirinejhad, M. K.
Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
-
Amiri Tokaldany, Ebrahim
Estimation of Friction Coefficient in Sediment Contained Flow through Rockfill [Volume 26, Issue 2, 2013, Pages 187-196]
-
Amirshahi, S. H.
Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
-
AmirShahkarami, A.
Effects of Lateral Constraints and Geometrical Characteristics on Deformation Capacity of the Persian Historic Unreinforced Masonry Shear Walls under Uncertainty Conditions [Volume 33, Issue 11, 2020, Pages 2127-2136]
-
Amirshenava, S.
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Amirsoleimani, Pegah
Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock [Volume 32, Issue 11, 2019, Pages 1591-1609]
-
Amirthagadeswaran, K.S.
Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy [Volume 26, Issue 4, 2013, Pages 365-374]
-
Amirthalakshmi, T. M.
Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
-
Amiruddin, A
Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
-
Amirzadeh, Z.
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Amit Kumar, R
Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading [Volume 31, Issue 1, 2018, Pages 104-109]
-
Amjadi, A.
Acousto-Refrigerator with an Adjustable Mechanical Resonator (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 183-196]
-
Amoozad-Khalili, H.
A Bi-level Meta-heuristic Approach for a Hazardous Waste Management Problem [Volume 33, Issue 7, 2020, Pages 1304-1310]
-
Amoozad-Khalili, Hossein
Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
-
Amoozeidi, Sepideh
A Novel Temporal-Frequency Domain Error Concealment Method for Motion Jpeg [Volume 23, Issue 2, 2010, Pages 121-132]
-
Amouei, M.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Amraee, T.
Delay-Scheduled Controllers for Inter-Area Oscillations Considering Time Delays [Volume 31, Issue 11, 2018, Pages 1852-1861]
-
Amraei, A.
A development in the finite volume method for the crack growth analysis without global remeshing [Volume 29, Issue 7, 2016, Pages 898-908]
-
Amrane, Mohamed Nadir
Effects of Material and Geometrical Parameters on the Free Vibration of Sandwich Beams [Volume 29, Issue 2, 2016, Pages 222-228]
-
Amrullah, A.
Combustion Behavior of Fuel Briquettes Made from Ulin Wood and Gelam Wood Residues [Volume 33, Issue 11, 2020, Pages 2365-2371]
-
Amrullah, A.
Catalytic Upgrading of Bio-oil from Ulva lactuca using Amberlyst-15 Catalyst: Experimental and Kinetic Model [Volume 36, Issue 9, 2023, Pages 1677-1685]
-
Anand, N.
Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature [Volume 33, Issue 10, 2020, Pages 1897-1903]
-
Anand, N.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Ananda, V. R.
Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
-
Anand Raj, P.
Enhancing Comfort in Tropical Institutional Buildings: Integrating Thermal, Acoustic and Visual Performance with a Unified Index [Volume 36, Issue 12, 2023, Pages 2253-2263]
-
Ananthanarayana, V. S.
Cross-modal Deep Learning-based Clinical Recommendation System for Radiology Report Generation from Chest X-rays [Volume 36, Issue 8, 2023, Pages 1569-1577]
-
Anbia, Mansoor
Modified Nanoporous Carbon Material for Anionic Dye Removal from Aqueous Solution [Volume 25, Issue 4, 2012, Pages 259-268]
-
Anbia, Mansoor
Aqueous Cadmium Ions Removal by Adsorption on APTMS Grafted Mesoporous Silica MCM-41 in Batch and Fixed Bed Column Processes [Volume 26, Issue 5, 2013, Pages 473-488]
-
Anbia, Mansoor
Synthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media [Volume 27, Issue 9, 2014, Pages 1415-1422]
-
Anbia, Mansoor
Novel Amine Modified Nanoporous SBA-15 Sorbent for the Removal of H2S from Gas Streams in the Presence of CH4 (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1697-1704]
-
Anbia, Mansoor
Investigation of Carbon Dioxide Adsorption on Amino-Functionalized Mesoporous Silica [Volume 28, Issue 6, 2015, Pages 848-854]
-
Anbia, Mansoor
Effect of Particle Size of NaX Zeolite on Adsorption of CO2/CH4 [Volume 29, Issue 1, 2016, Pages 1-7]
-
Anbia, Mansoor
Synthesis and Characterization of Amine-modified Mesoporous SBA-15 for Carbon Dioxide Sequestration at High Pressure and Room Temperature (RESEARCH NOTE) [Volume 29, Issue 10, 2016, Pages 1341-1346]
-
Andami, P.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Andargoli, S. M. H.
Design of a High Range, High Efficiency Spread Spectrum Transmitter for Audio Communication Applications [Volume 32, Issue 8, 2019, Pages 1144-1154]
-
Andoko, A.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Andreev, Kirill
Development of a hydraulic circulation sub as a tool to prevent mud losses during well drilling [(Articles in Press)]
-
Ang, W. L
Influence of Particle Size and Pressure Drop in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent [Volume 31, Issue 8, 2018, Pages 1437-1445]
-
Angadi, B. M.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Angra, S
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning [Volume 31, Issue 1, 2018, Pages 164-172]
-
Angra, S.
Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
-
Anisheh, Mahmoud
Adaptive Segmentation with Optimal Window Length Scheme using Fractal Dimension and Wavelet Transform [Volume 22, Issue 3, 2009, Pages 257-268]
-
Anisheh, Mahmoud
An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
-
Anish Jafrin Thilak, J.
Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]
-
Anjomrouz, A.
Improvement of Surface Evaporation by Reducing Heat Transfer to Fluid Bulk and Increasing Heat Absorption [Volume 37, Issue 6, 2024, Pages 1154-1163]
-
Anjomrouz, E.
Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
-
Annakulov, T.
Extraction of Inclined Exit Ledges in Coal Mines in Presence of Mobile Crushing and Conveyor Complexes [Volume 37, Issue 8, 2024, Pages 1658-1666]
-
Ansari, K.
Spice Compatible Model for Multiple Coupled Nonuniform Transmission Lines Application in Transient Analysis of VLSI Circuits [Volume 17, Issue 2, 2004, Pages 119-130]
-
Ansari, M.
A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
-
Ansari, M. I.
Probabilistic Damage Analysis of Isolated Steel Tub Girder Bridge Excited by Near and Far Fault Ground Motions [Volume 36, Issue 2, 2023, Pages 289-298]
-
Ansari, R.
Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
-
Anuradha, K.
Study and Analysis of A Simple Self Cascode Regulated Cascode Amplifier [Volume 31, Issue 10, 2018, Pages 1633-1641]
-
Anvari, M.
A Database Model for Medical Consultation [Volume 4, Issue 1, 1991, Pages 23-30]
-
Anwar, A.
Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
-
AR, Umayal Sundari
Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]
-
Arab, Najmeddin
Analytical Modeling of Axi-Symmetric Sheet Metal Forming [Volume 24, Issue 1, 2011, Pages 55-63]
-
Arab, R
Solving a New Multi-objective Inventory-Routing Problem by a Non-dominated Sorting Genetic Algorithm [Volume 31, Issue 4, 2018, Pages 588-596]
-
Arabani, M.
Evaluation of Rough Set Theory for Decision Making of rehabilitation Method for Concrete Pavement [Volume 18, Issue 3, 2005, Pages 229-238]
-
Arabani, M.
A Stochastic Model for Indirect Condition Monitoring Using Proportional Covariate Model [Volume 21, Issue 1, 2008, Pages 45-56]
-
Arabani, M.
Evaluating the Semi-Circular Bending Test for HMA Mixtures [Volume 22, Issue 1, 2009, Pages 47-58]
-
Arabani, M.
3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
-
Arabi, Amana
Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
-
Arabi, S. M.
Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
-
Arabieh, Massod
Adsorptive Behavior of an Amberlite Anion Exchanger Resin for Uranium (VI) Sorption in the Presence of Sulfate Anions [Volume 29, Issue 2, 2016, Pages 170-175]
-
Arab Khaburi, D.
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Arab Markadeh, G. R.
A Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer [Volume 19, Issue 1, 2006, Pages 21-34]
-
Arab Markadeh, G. R.
An Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 19-26]
-
Arabpour D., Farzad
Application of Nanotechnology in Self-Compacting Concrete Design [Volume 22, Issue 3, 2009, Pages 229-244]
-
Arabzadeh, A.
A Simple Approach to Predict the Shear Capacity and Failure Mode of Fix-ended Reinforced Concrete Deep Beams based on Experimental Study [Volume 32, Issue 4, 2019, Pages 474-483]
-
Arahman, Nasrul
Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
-
Arami, H.
Electrochemical Deposition of Flower-Like Nickel Nanostructures on Well-Defined n-Si (111):H [Volume 21, Issue 2, 2008, Pages 177-182]
-
Aramon-Bajestani, M.
A Novel B and B Algorithm for a Unrelated Parallel Machine Scheduling Problem to Minimize the Total Weighted Tardiness [Volume 22, Issue 3, 2009, Pages 269-286]
-
Arasteh, J.
Effect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy [Volume 33, Issue 9, 2020, Pages 1766-1772]
-
Arbab, M. H.
Significant Error Propagation in the Finite Difference Solution of Non-Linear Magnetostatic Problems Utilizing Boundary Condition of the Third Kind [Volume 16, Issue 4, 2003, Pages 319-330]
-
Arbabi, Faraz
Numerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells [Volume 25, Issue 3, 2012, Pages 177-186]
-
Arbabtafti, M.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Arbabtafti, M.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Arbaoui, M.
Analysis Randon Causes Repeatability Errors Inducted by Friction at Joints in Industrial Robots [Volume 35, Issue 2, 2022, Pages 451-457]
-
Ardana, M.D.W
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Ardekani, M.A.
Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
-
Ardeshir, A
A Prioritization Model for HSE Risk Assessment Using Combined Failure Mode, Effect Analysis, and Fuzzy Inference System: A Case Study in Iranian Construction Industry [Volume 31, Issue 9, 2018, Pages 1487-1497]
-
Ardeshir, A.
Development of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements [Volume 20, Issue 2, 2007, Pages 105-116]
-
Ardeshir, Ahmad
Can the History Force be Neglected for the Motion of Particles at High Subcritical Reynolds Number Range? [Volume 19, Issue 1, 2006, Pages 23-34]
-
Ardeshir, G
A Simple General-purpose I-V Model for All Operating Modes of Deep Submicron MOSFETs [Volume 31, Issue 2, 2018, Pages 270-277]
-
Ardeshir, G
The Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method [Volume 31, Issue 2, 2018, Pages 307-314]
-
Ardeshir, G.
A New Analog-based LO Harmonic Rejection Technique with Tunable Notch Frequency [Volume 31, Issue 11, 2018, Pages 1893-1902]
-
Ardeshir, G.
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Ardeshir, G.
Compressing Face Images Using Genetic and Gray Wolf Meta-heuristic Algorithms Based on Variable Bit Allocation [Volume 36, Issue 4, 2023, Pages 682-697]
-
Ardeshir, Gholamreza
Statistical Background Modeling Based on Velocity and Orientation of Moving Objects [Volume 21, Issue 1, 2008, Pages 39-54]
-
Ardeshir, Gholamreza
Dual Phase Detector Based Delay Locked Loop for High Speed Applications [Volume 27, Issue 4, 2014, Pages 517-522]
-
Ardeshir, Gholamreza
Using a Novel Concept of Potential Pixel Energy for Object Tracking [Volume 27, Issue 7, 2014, Pages 1023-1032]
-
Ardeshir, Gholamreza
Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
-
Ardeshir, Gholamreza
Improving Linearity of CMOS Variable-gain Amplifier Using Third-order Intermodulation Cancellation Mechanism and Intermodulation Distortion Sinking Techniques [Volume 30, Issue 2, 2017, Pages 192-198]
-
Ardeshiri, Anam
An Approach for the Estimation of Aggregate Potential Telecommuting Demand [Volume 24, Issue 4, 2011, Pages 331-340]
-
Ardestani, F.
Poultry Slaughterhouse Wastewater Treatment Using Anaerobic Fluid Bed Reactor and Aerobic Mobile-Bed Biological Reactor [Volume 32, Issue 5, 2019, Pages 634-640]
-
Ardestani, Fatemeh
Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
-
Arefian, N.A.
Effects of the pH of Initial Solution on Hydrothermally Synthesized TiO2 Nanoparticles [Volume 25, Issue 2, 2012, Pages 131-136]
-
Arefin, A.
Investigation of Different Validation Parameters of Micro Gas Turbine for Range Extender Electric Truck [Volume 31, Issue 10, 2018, Pages 1782-1788]
-
Arefmanesh, Ali
Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
-
Arefnia, A.
Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
-
Arehpanahi, M
Position Control Improvement of Permanent Magnet Motor Using Model Predictive Control [Volume 31, Issue 7, 2018, Pages 1044-1049]
-
Arehpanahi, M
A New Single-phase Symmetrical Cascade Multilevel Inverter with Low Number of Power Switches [Volume 31, Issue 8, 2018, Pages 1228-1233]
-
Arehpanahi, M.
A New Optimization of Segmented Interior Permanent Magnet Synchronous Motor Based on Increasing Flux Weakening Range and Output Torque (Research Note) [Volume 33, Issue 6, 2020, Pages 1122-1127]
-
Arehpanahi, M.
A New Technique for Online Open Switch Fault Detection and Location in Single-phase Pulse Width Modulation Rectifier [Volume 35, Issue 9, 2022, Pages 1759-1764]
-
Arehpanahi, M.
A new Online Hall Effect Sensor Fault Detection and Location in Brushless DC Motor Based on Normalized Phases Currents Analysis [Volume 36, Issue 12, 2023, Pages 2145-2152]
-
Argimbaev, K. R.
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Argimbaev, K. R.
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Argimbaev, K. R.
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Argimbaev, K. R.
Investigations on Material Composition of Iron-containing Tails of Enrichment of Combined Mining and Processing in Kursk Magnetic Anomaly of Russia [Volume 33, Issue 7, 2020, Pages 1431-1439]
-
Arham Nmazi, Abas
Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
-
Arief, Yanuar Z.
Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types [Volume 29, Issue 9, 2016, Pages 1257-1262]
-
Arifuddin, R.
Study on the Application of Sustainable Construction in the Development of the Likupang Special Economic Zone [Volume 36, Issue 1, 2023, Pages 50-59]
-
Arifuzzaman, A. K. M
Deterioration of Concrete in Ambient Marine Environment (RESEARCH NOTE) [Volume 25, Issue 4, 2012, Pages 289-302]
-
Arif Wibisono, M
Modelling and Optimisation of Coconut Shell Drying and Carbonisation Using Multi-response Taguchi Method with Multi-response Signal-to-noise Procedure [Volume 31, Issue 3, 2018, Pages 464-472]
-
Aripin, H.
Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
-
Arish, N.
Development of Linear Vernier Hybrid Permanent Magnet Machine for Wave Energy Converter [Volume 33, Issue 5, 2020, Pages 805-813]
-
Arish, N.
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Arish, N.
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Arivazhagan, Selvaraj
Object Recognition based on Local Steering Kernel and SVM [Volume 26, Issue 11, 2013, Pages 1281-1288]
-
Ariz, M.
Thermal Performance of Jet Impingement with Spent Flow Management [Volume 30, Issue 10, 2017, Pages 1599-1608]
-
Arjmandazar Varjovi, M.
Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
-
Arjmandi, A
Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
-
Arjmandi, M
Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
-
Arjomand, M. A.
Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
-
Arjomand, M. A.
An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
-
Arkat, J
Modeling the Trade-off between Manufacturing Cell Design and Supply Chain Design [Volume 31, Issue 4, 2018, Pages 640-647]
-
Arkat, J.
Sustainable Surface Water Management and Wastewater Treatment Plant Location: A Case Study of Urmia Lake [Volume 33, Issue 4, 2020, Pages 621-630]
-
Arkat, J.
A Hybrid Genetic Algorithm for Integrated Production and Distribution Scheduling Problem with Outsourcing Allowed [Volume 33, Issue 11, 2020, Pages 2285-2298]
-
Arkat, J.
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Arkat, J.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Arkat, J.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Arkat, J.
Data Consumption Analysis by Two Ordinal Multivariate Control Charts [Volume 35, Issue 11, 2022, Pages 2196-2204]
-
Arkat, J.
Energy-Conscious Common Operation Scheduling in an Identical Parallel Machine Environment [Volume 37, Issue 7, 2024, Pages 1443-1465]
-
Arkat, Jamal
A Generalized Linear Statistical Model Approach to Monitor Profiles [Volume 20, Issue 3, 2007, Pages 233-242]
-
Arkat, Jamal
Network Location Problem with Stochastic and Uniformly Distributed Demands [Volume 29, Issue 5, 2016, Pages 654-662]
-
Aroo, H.
Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy [Volume 33, Issue 8, 2020, Pages 1579-1589]
-
Arora, A.
Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
-
Arora, H. D.
Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
-
Arora, V. K.
Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
-
Arsana, I. M.
Effect of Wire Pitch on Capacity of Single Staggered Wire and Tube Heat Exchanger Using Computational Fluid Dynamic Simulation [Volume 33, Issue 8, 2020, Pages 1637-1642]
-
Arsana, I. M.
Simulation Study on Efficiency of Woven Matrix Wire and Tube Heat Exchanger [Volume 33, Issue 12, 2020, Pages 2572-2577]
-
Arshadi, M. R.
Synergistic Influence of Benzoate Ions on Inhibition of Corrosion of Mild Steel in 0.5m Sulfuric Acid by Benzotriazole [Volume 16, Issue 3, 2003, Pages 255-264]
-
Arshadi khamseh, A
A New Combination of Robust-possibilistic Mathematical Programming for Resilient Supply Chain Network under Disruptions and Uncertainty: A Real Supply Chain (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 612-621]
-
Arshadikhamseh, A
A Robust Reliable Closed Loop Supply Chain Network Design under Uncertainty: A Case Study in Equipment Training Centers [Volume 31, Issue 4, 2018, Pages 648-658]
-
Arshadikhamseh, A
Optimal Decisions in a Dual-channel Supply Chain for the Substitute Products with the Special Orders under DisruptionRisk and Brand Consideration [Volume 31, Issue 5, 2018, Pages 759-769]
-
Arshi, A. R.
Kinesiological Description of Hippotherapy as a Treatment Modality [Volume 33, Issue 11, 2020, Pages 2347-2355]
-
Arulraj, P. G.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Arulraj, P. G.
Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature [Volume 33, Issue 10, 2020, Pages 1897-1903]
-
Arum, C.
Challenges and Prospects of Widespread Adoption of Pozzolans for Building Construction: A Statistical Assessment [Volume 35, Issue 10, 2022, Pages 1929-1940]
-
Arum, C.
Bending Strength Evaluation of Glulam Beams Made from Selected Nigerian Wood Species [Volume 35, Issue 11, 2022, Pages 2120-2129]
-
Arunkumar, N.
An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
-
Arunraj, E
Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
-
Arunraj, E.
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Arvan, Mohammad Reza
Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
-
Arwin Amiruddin, A.
Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
-
Aryana, F.
Analysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives [Volume 21, Issue 1, 2008, Pages 85-96]
-
Aryanezhad, M.B.
A Partially Observable Markovian Maintenance Process with Continuous Cost Functions [Volume 1, Issue 4, 1988, Pages 201-210]
-
Aryanezhad, M.B.
Bus Assignment to Iranian Pilgrims During Pilgrimage [Volume 10, Issue 3, 1997, Pages 153-162]
-
Aryanezhad, M.B.
A new Approach Versus Benders Decomposition in Aggregate Production Planning [Volume 14, Issue 4, 2001, Pages 351-360]
-
Aryanezhad, M.B.
Two Stage Multiple Attribute Decision Making Problem in Iranian Gas Distribution Systems [Volume 17, Issue 2, 2004, Pages 135-144]
-
Aryanezhad, M.B.
A Holistic Approach Based on MCDM for Solving Location Problems [Volume 20, Issue 3, 2007, Pages 251-262]
-
Aryanezhad, M.B.
A New Multi-Objective Model for a Cell Formation Problem Considering Machine Utilization and Alternative Process Routes (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 21-32]
-
Aryanezhad, M.B.
A Mathematical Method for Managing the System Constraint [Volume 24, Issue 1, 2011, Pages 37-47]
-
Aryanti, N.
Partial Enzymatic Hydrolysis of Glucomannan and Its Mathematical Model [Volume 36, Issue 12, 2023, Pages 2214-2221]
-
Asadi, A.
Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater [Volume 32, Issue 1, 2019, Pages 10-17]
-
Asadi, A.
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment [Volume 32, Issue 2, 2019, Pages 184-192]
-
Asadi, Abolfazl
Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
-
Asadi, Azar
A Comparative Study on Performance of Two Aerobic Sequencing Batch Reactors with Flocculated and Granulated Sludge Treating an Industrial Estate Wastewater: Process Analysis and Modeling [Volume 26, Issue 2, 2013, Pages 105-116]
-
Asadi, Bahman
Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition [Volume 22, Issue 3, 2009, Pages 295-305]
-
Asadi, M.
Dairy Wastewater Treatment using Three-Stage Rotating Biological Contactor (NRBC) [Volume 22, Issue 2, 2009, Pages 107-114]
-
Asadi, M.
Environmental Impact of Fossil Fuel Utilization in Neka Thermal Power Plant [Volume 23, Issue 2, 2010, Pages 115-120]
-
Asadi, Sekineh
Image Quality Enhancement Using Pixel Wise Gamma Correction [Volume 24, Issue 4, 2011, Pages 301-312]
-
Asadi, Sekineh
Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
-
Asadi, Sekineh
Deblocking Joint Photographic Experts Group Compressed Images via Self-learning Sparse Representation [Volume 29, Issue 12, 2016, Pages 1684-1690]
-
Asadi, Y.
Investigation of Dual Fuel Diesel Engine With Particular Reference to Engine Cycle Model [Volume 2, Issue 1, 1989, Pages 65-70]
-
Asadi Amiri, S.
Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
-
Asadi Amiri, S.
Adaptive Image Dehazing via Improving Dark Channel Prior [Volume 32, Issue 2, 2019, Pages 249-255]
-
Asadian, Keivan
Effect of Formation of Ag2Ti4O9 Phase on Photocatalytic Activity of Ag-TiO2 Nanocomposite [Volume 29, Issue 5, 2016, Pages 663-668]
-
Asadi Saeed Abad, F.
An Architecture for Security and Protection of Big Data [Volume 30, Issue 10, 2017, Pages 1479-1486]
-
Asadi Yousef-abad, S. Kobra
Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
-
Asadi Zarch, Mahdi
Microstructure and Corrosion Performance of Silica Coatings on Aluminum Surface Prepared by Plasma Electrolysis Technique [Volume 22, Issue 3, 2009, Pages 291-298]
-
Asadollahzadeh, M.
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Asadollahzadeh, Mehdi
Studies of Drop Behavior and Prediction of Sauter Mean Drop Diameter in Various Rotary Agitated Extraction Columns [Volume 29, Issue 8, 2016, Pages 1047-1055]
-
Asadollahzadeh, Mehdi
Extraction of Molybdenum (VI) and Vanadium (V) from Nitrate Solutions Using Coupling of Acid and Solvating Extractants (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1366-1371]
-
Asadpour, M.
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Asadpour, R.
Further Study of Adsorption of Crude Oils onto Acetylated Corn Silk and its Kinetics and Equilibrium Isotherm [Volume 32, Issue 2, 2019, Pages 229-235]
-
A. Sadreddini, S. M.
Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
-
A. Samani, A.
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Asayesh, M.
Vibration Analysis of Rotating Shaft with Loose Disk [Volume 15, Issue 4, 2002, Pages 385-393]
-
Asefi, Monireh
An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
-
Asemaneh, H. R.
Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
-
Asgari, Ali
Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
-
Asgari, G.
Sonocatalytic Degradation of p-Chlorophenol by Nanoscale Zero-valent Copper Activated Persulfate under Ultrasonic Irradiation in Aqueous Solutions [Volume 33, Issue 6, 2020, Pages 1061-1069]
-
Asgari, H.
Quaternion-based Finite-time Sliding Mode Controller Design for Attitude Tracking of a Rigid Spacecraft during High-thrust Orbital Maneuver in the Presence of Disturbance Torques [Volume 32, Issue 3, 2019, Pages 430-437]
-
Asgari, H.
Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
-
Asgari, M
Evaluation of Project Critical Success Factors for Key Construction Players and Objectives [Volume 31, Issue 2, 2018, Pages 228-240]
-
Asgari, M
Vibration Behavior of Nanocomposite Plate Reinforced by Pristine and Defective Graphene Sheets; an Analytical Approach [Volume 31, Issue 7, 2018, Pages 1095-1102]
-
Asgari, M.
Investigating The Seismic Response of Structural Walls Using Nonlinear Static and Incremental Dynamic Analyses [Volume 30, Issue 11, 2017, Pages 1691-1699]
-
Asgari, M.S.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Asgari, S.
Abnormal Plastic Behavior of Fine Grain Mp35n Alloy During Room Temperature Tensile Testing [Volume 16, Issue 2, 2003, Pages 163-170]
-
Asgari, S.
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Asgarkhani, N.
Effect of Aging Treatment on Microstructure and Mechanical Properties of Al0.7CoCrFeNi High Entropy Alloy [Volume 36, Issue 6, 2023, Pages 1060-1065]
-
Asghari, A
Effect of Ambient Condition on the Shower Cooling Tower in Four Type of Climates Condition [Volume 31, Issue 5, 2018, Pages 841-846]
-
Asghari, R.
Delay-Scheduled Controllers for Inter-Area Oscillations Considering Time Delays [Volume 31, Issue 11, 2018, Pages 1852-1861]
-
Asgharian Marzabad, M.
Determination of Riboflavin by Nanocomposite Modified Carbon Paste Electrode in Biological Fluids Using Fast Fourier Transform Square Wave Voltammetry [Volume 33, Issue 9, 2020, Pages 1696-1702]
-
Asghari Beirami, B.
Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]
-
Asghari Beirami, B.
Land Covers Classification from LiDAR-DSM Data Based on Local Kernel Matrix Features of Morphological Profiles [Volume 36, Issue 9, 2023, Pages 1611-1617]
-
Asgharpoor, M. J.
Solving a Stochastic Cellular Manufacturing Model by Using Genetic Algorithms [Volume 17, Issue 2, 2004, Pages 145-156]
-
Asgharpour, Somayeh
Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
-
Ashabi, A.
Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
-
Ashish, A.
Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates [Volume 37, Issue 4, 2024, Pages 625-634]
-
Ashoka Reddy, K.
Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
-
Ashoorian, Peyman
A Comparative Study of VHDL Implementation of FT-2D-cGA and FT-3D-cGA on Different Benchmarks (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1276-1285]
-
Ashory, M. R
A Computational Study about the Effect of Turbines Pitched Blade Attack Angle on the Power Consumption of a Stirred Tank [Volume 31, Issue 1, 2018, Pages 65-70]
-
Ashorynejad, Hamid Reza
Lattice Boltzmann Simulation of Nanofluids Natural Convection Heat Transfer in Concentric Annulus (TECHNICAL NOTE) [Volume 26, Issue 8, 2013, Pages 895-904]
-
Ashourian, Mohsen
A Novel Temporal-Frequency Domain Error Concealment Method for Motion Jpeg [Volume 23, Issue 2, 2010, Pages 121-132]
-
Ashourian, Mohsen
Real Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology [Volume 26, Issue 11, 2013, Pages 1347-1356]
-
Ashouri-Talouki, M.
DoS-Resistant Attribute-Based Encryption in Mobile Cloud Computing with Revocation [Volume 32, Issue 9, 2019, Pages 1290-1298]
-
Ashrafi, A.
Theoretical Studies of Electrical Characteristics of the Nitrogen Laser [Volume 7, Issue 3, 1994, Pages 143-154]
-
Ashrafi, A.
A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]
-
Ashrafi, A.
Studying the Effective Parameters on Teeth Height in Internal Gear Flowforming Process [Volume 33, Issue 12, 2020, Pages 2563-2571]
-
Ashrafi, Arash
Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
-
Ashrafi, Hossein
A General Boundary Element Formulation for The Analysis of Viscoelastic Problems [Volume 23, Issue 2, 2010, Pages 153-168]
-
Ashraf Talesh, Seyed Siamak
A Dimensionless Parameter Approach based on Singular Value Decomposition and Evolutionary Algorithm for Prediction of Carbamazepine Particles Size [Volume 30, Issue 3, 2017, Pages 330-337]
-
Ashrafzadeh, Fedra
Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
-
Ashrafzadeh, Fedra
Introduction of Air Cushion to Reduce Seismic Demand in Cylindrical Water Storage Tanks [Volume 29, Issue 4, 2016, Pages 464-472]
-
Ashtari, parviz
Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
-
Ashuri, Atefeh
Drift Change Point Estimation in the rate and dependence Parameters of Autocorrelated Poisson Count Processes Using MLE Approach: An Application to IP Counts Data [Volume 28, Issue 7, 2015, Pages 1021-1030]
-
Asiri, A. M.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Askari, T.
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Askarian Abyaneh, H.
A New Approach for Determination of Break Points for Protection Co-Ordination [Volume 16, Issue 2, 2003, Pages 133-142]
-
Askarian Abyaneh, H.
A Novel Fuzzy and Artificial Neural Network Representation of Overcurrent Relay Characteristics [Volume 16, Issue 3, 2003, Pages 233-246]
-
Askari D., Yousef
Ultimate Unbonded Tendon Stress in CFRP Strengthened Post-Tensioned Indeterminate I-Beams Cast with HSCs [Volume 28, Issue 3, 2015, Pages 350-359]
-
Askari Lasaki, Salar
Mathematical Modeling of Potential Flow over a Rotating Cylinder (RESEARCH NOTE) [Volume 24, Issue 1, 2011, Pages 55-63]
-
Askari Lasaki, Salar
Oil Reservoirs Classification Using Fuzzy Clustering (RESEARCH NOTE) [Volume 30, Issue 9, 2017, Pages 1391-1400]
-
Askarinejad, H.
Influences of Track Structure, Geometry and Traffic Parameters on Railway Deterioration [Volume 20, Issue 3, 2007, Pages 292-300]
-
Askaripour, K.
Diagnosis of Delaminated Composites Using Post-processed Strain Measurements under Impact Loading [Volume 32, Issue 1, 2019, Pages 54-61]
-
Askarizadeh, Hossein
Analytical Analysis of The Dual-phase-lag Heat Transfer Equation in a Finite Slab with Periodic Surface Heat Flux (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 971-978]
-
Aslami, M. H.
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Asl Hadad, A.
A Novel Excellence Model of the ICT Industry: Case Study on Telecommunications Backbone Network of Iran [Volume 33, Issue 10, 2020, Pages 2016-2029]
-
Aslinezhad, M.
A Noise-aware Deep Learning Model for Automatic Modulation Recognition in Radar Signals [Volume 36, Issue 8, 2023, Pages 1459-1467]
-
Aslipour, Z.
Identification of Wind Turbine using Fractional Order Dynamic Neural Network and Optimization Algorithm [Volume 33, Issue 2, 2020, Pages 277-284]
-
Assadat Yaghubi, N.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Assadi, A.
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Assari, M. R.
Performance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 884-892]
-
Assari, M. R.
Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
-
Assari, M. R.
Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
-
Assari, M. R.
Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study [Volume 35, Issue 1, 2022, Pages 237-247]
-
Assempour, A.
Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique [Volume 15, Issue 2, 2002, Pages 167-172]
-
Assempour, A.
Evaluation of Forming Severity and Thickness Variation in Deep Drawing Process [Volume 16, Issue 2, 2003, Pages 171-182]
-
Assempour, A.
An Upper Bound Approach for Analysis of Hydroforming of Sheet Metals [Volume 17, Issue 4, 2004, Pages 389-398]
-
Assempour, A.
The Performance of Karafillis-Boyce Yield Function on Determination of Forming Limit Diagrams [Volume 20, Issue 1, 2007, Pages 55-66]
-
Asswad, M. F.
Finite Element Analysis on Behavior of Single Battered Pile in Sandy Soil Under Pullout Loading [Volume 35, Issue 6, 2022, Pages 1127-1134]
-
Asvar, Fariba
Effects of Cement and Mineral Polymer on Geotechnical Properties of Silty Sand as the Base Material [(Articles in Press)]
-
Aswad, M. A.
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Aswad, M. A.
Study on Iraqi Bauxite Ceramic Reinforced Aluminum Metal Matrix Composite Synthesized by Stir Casting [Volume 33, Issue 7, 2020, Pages 1331-1339]
-
Asyaei, M
A New Circuit Scheme for Wide Dynamic Circuits [Volume 31, Issue 5, 2018, Pages 699-704]
-
Atabi, F.
Wind Energy Estimation for Production of Electricity in Iran [Volume 10, Issue 1, 1997, Pages 19-26]
-
Ataee-pour, Majid
Choosing the Optimum Underground Mine Layout with Regard to Metal Price Uncertainty Using Expected Utility Theory [Volume 32, Issue 12, 2019, Pages 1813-1822]
-
Ataei, H.
Energy-Conscious Common Operation Scheduling in an Identical Parallel Machine Environment [Volume 37, Issue 7, 2024, Pages 1443-1465]
-
Ataei, Mohammad
Using 2D Lerchs and Grossmann Algorithm to Design Final Pit Limits of Sungun Copper Deposit of Iran (TECHNICAL NOTE) [Volume 13, Issue 4, 2000, Pages 81-89]
-
Ataeian, Arash
An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
-
AtaKaramians, S.
A New Method for Calculating Propagation Modes of a One Dimensional Photonic Crystal (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 25-28]
-
Atashafrooz, Meysam
Three Dimensional Laminar Convection Flow of Radiating Gas over a Backward Facing Step in a Duct [Volume 25, Issue 4, 2012, Pages 399-410]
-
Atashi, H.
The Effects of Potassium Promoter on the Syngas Conversion of Cobalt Catalysts (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 285-293]
-
Atashipour, Seyed Rasoul
Exact Analytical Solution for Bending Analysis of Functionally Graded Annular Sector Plates [Volume 22, Issue 3, 2009, Pages 307-316]
-
Atashipour, Seyed Rasoul
Exact Elasticity Solutions for Thick-Walled FG Spherical Pressure Vessels with Linearly and Exponentially Varying Properties [Volume 22, Issue 4, 2009, Pages 405-416]
-
Atashipour, Seyed Rasoul
An Elasticity Solution for Static Analysis of Functionally Graded Curved Beam Subjected to a Shear Force [Volume 23, Issue 2, 2010, Pages 169-178]
-
Atashkari, K.
AERO-THERMODYNAMIC OPTIMIZATION OF TURBOPROP ENGINES USING MULTI-OBJECTIVE GENETIC ALGORITHMS [Volume 23, Issue 3, 2010, Pages 253-266]
-
Atashnezhad, A.
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
-
Atia, Aissa
Effect of Magnetic Field on the Rotating Flow in a Similar Czochralski Configuration [Volume 29, Issue 4, 2016, Pages 563-571]
-
Attaran, B.
A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain [Volume 33, Issue 4, 2020, Pages 668-675]
-
Attaran, Behrooz
Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1167-1174]
-
Attaran, Behrooz
Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE) [Volume 29, Issue 9, 2016, Pages 1300-1306]
-
Attaran, Behrooz
Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
-
Attarchi, Mehdi
Pulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein [Volume 22, Issue 2, 2009, Pages 161-168]
-
Attarian, Saeid
Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
-
Attia, E.-A.
Mistake Proofing Cam Mechanism Through Six-sigma Process: Case Study on Clothes Printing Machines [Volume 32, Issue 3, 2019, Pages 438-444]
-
Aujloo, A.
A Low Cost Sensorless Control Drive Circuit for of Low Voltage Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 201-208]
-
Austin, N
Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models [Volume 31, Issue 1, 2018, Pages 32-37]
-
Auti, Abhijit
Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
-
Avanessian, J.
The Potentiodynamic Behavior of Copper in NaCI Solutions Studied by Auger and Photoelectron Spectroscopy [Volume 1, Issue 1, 1988, Pages 1-6]
-
Avasthi, V.
An Expert System Based on Type-1 Fuzzy Logic and Digital Image Processing for Knowledge Based Edge and Contour Detection [Volume 36, Issue 7, 2023, Pages 1278-1286]
-
Avilés, O
Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources [Volume 31, Issue 8, 2018, Pages 1215-1221]
-
Avilés, O. F.
A Real-time Motion Tracking Wireless System for Upper Limb Exosuit Based on Inertial Measurement Units and Flex Sensors (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 820-827]
-
Avşar Aydin, E.
Low-cost Vector Network Analyzer for Biomedical Applications [Volume 32, Issue 3, 2019, Pages 400-404]
-
Awad, S. H.
Study on Iraqi Bauxite Ceramic Reinforced Aluminum Metal Matrix Composite Synthesized by Stir Casting [Volume 33, Issue 7, 2020, Pages 1331-1339]
-
Awale, R
A Unique Approach of Noise Elimination from Electroencephalography Signals between Normal and Meditation State [Volume 31, Issue 5, 2018, Pages 719-728]
-
Awale, R. N.
A Comparative Analysis of Wavelet-Based FEMG Signal Denoising with Threshold Functions and Facial Expression Classification Using SVM and LSSVM [Volume 33, Issue 7, 2020, Pages 1249-1256]
-
Awang, H.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Awang, M.
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Awang, Mariyamni B.
Lattice Gas Automata Simulation of Adsorption Process of Polymer in Porous Media [Volume 17, Issue 4, 2004, Pages 329-338]
-
Awang, Mokhtar
Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1480-1484]
-
Awda, Laith
Analysis of Temperature Effect on a Crystalline Silicon Photovoltaic Module Performance [Volume 29, Issue 5, 2016, Pages 722-727]
-
Awda, M. J.
Synthesis, Characterization, and Application of EDTA-Coated Maghemite Magnetic Nanoparticles for Oil Spill Cleanup from Water Surface [Volume 37, Issue 8, 2024, Pages 1500-1509]
-
Aweda, F. O.
Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
-
Ayadat, T.
Optimizing of Steel Fiber Reinforced Concrete Mix Design [Volume 17, Issue 1, 2004, Pages 41-50]
-
Ayadat, T.
Failure Process of Stone Columns in Collapsible Soils [Volume 21, Issue 2, 2008, Pages 135-142]
-
Ayadat, T.
ASSESSEMENT OF SOIL COLLAPSE PREDICTION METHODS [Volume 25, Issue 1, 2012, Pages 19-26]
-
Ayati, E.
Rural Road Traffic Accidents in Iran [Volume 2, Issue 3, 1989, Pages 88-97]
-
Ayati, E.
The Cost of Road Accidents in Iran [Volume 2, Issue 3, 1989, Pages 98-103]
-
Ayoubi, M.
Change Point Estimation of the Stationary State in Auto Regressive Moving Average Models, Using Maximum Likelihood Estimation and Singular Value Decomposition-based Filtering [Volume 32, Issue 5, 2019, Pages 726-736]
-
Ayremlouzadeh, Hadi
Numerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE) [Volume 29, Issue 8, 2016, Pages 1175-1182]
-
Ayremlouzadeh, Hadi
Computational Fluid Dynamics Simulation and Experimental Validation of Hydraulic Performance of a Vertical Suspended API Pump (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1612-1619]
-
Azad, E
Interconnected Heat Pipe Solar Collector [Volume 22, Issue 3, 2009, Pages 233-242]
-
Azadeh, Ali
From Theory to Practice: a Total Ergonomics Model of a Manufacturing System [Volume 15, Issue 3, 2002, Pages 257-268]
-
Azadi, Arman
A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
-
Azadi, M.
The Effect of Various Parameters on Out-of-phase Thermo-mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy [Volume 26, Issue 12, 2013, Pages 1461-1470]
-
Azadi, M.
Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
-
Azadi, M.
Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
-
Azadi, M.
Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy [Volume 32, Issue 1, 2019, Pages 92-98]
-
Azadi, M.
Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy [Volume 32, Issue 1, 2019, Pages 92-98]
-
Azadi, M.
Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C [Volume 33, Issue 4, 2020, Pages 639-646]
-
Azadi, M.
Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C [Volume 33, Issue 4, 2020, Pages 639-646]
-
Azadi, M.
Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy [Volume 33, Issue 8, 2020, Pages 1579-1589]
-
Azadi, M.
Effect of Training Data Ratio and Normalizing on Fatigue Lifetime Prediction of Aluminum Alloys with Machine Learning [Volume 37, Issue 7, 2024, Pages 1296-1305]
-
Azadi, Mahboobeh
Effect of Temperature and Gas Flux on the Mechanical Behavior of TiC Coating by Pulsed DC Plasma Enhanced Chemical Vapor Deposition(TECHNICAL NOTE) [Volume 27, Issue 8, 2014, Pages 1243-1250]
-
Azadi, Mahboobeh
A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition [Volume 29, Issue 5, 2016, Pages 677-687]
-
Azadi, Mahboobeh
Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine [Volume 29, Issue 11, 2016, Pages 1604-1611]
-
Azadi, Mohammad
Corrosion Failure Study in an Oil Cooler Heat Exchanger in Marine Diesel Engine [Volume 29, Issue 11, 2016, Pages 1604-1611]
-
Azadi, S.
Air-Fuel Ratio Control of a Lean Burn SI Engine Using Fuzzy Self Tuning Method [Volume 13, Issue 2, 2000, Pages 45-54]
-
Azadi, Shahram
Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
-
Azadnia, A. H.
An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
-
Azadnia, Amir Hossein
A Multi-objective Mathematical Model for Sustainable Supplier Selection and Order Lot-Sizing under Inflation [Volume 29, Issue 8, 2016, Pages 1141-1150]
-
Azadpour, F.
Stress-Strain Field and Theoretical Analysis of RC Bridge [Volume 22, Issue 1, 2009, Pages 7-22]
-
Azami, G.
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Azami, Hamed
An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
-
Azan, D.
Effect of Fuzzy Boundaries on the Bearing Capacity of Footings on Two-Layered Clay [Volume 32, Issue 5, 2019, Pages 667-672]
-
Azarbad, M.
Reduction of Insolvency Risk and Total Costs in Banking Sector using Partners Selection Approach with Genetic Algorithm and Multilayer Perceptron Neural Network [Volume 37, Issue 8, 2024, Pages 1667-1690]
-
Azargoman, M.
Experimental Investigation and Statistical Modeling of the Effective Parameters in Charpy Impact Test on AZ31 Magnesium Alloy with V-shape Groove Using Taguchi Method [Volume 33, Issue 12, 2020, Pages 2521-2529]
-
Azari, Faeze
Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
-
Azari, Mehdi
Zone-3 Impadance Reach Setting of Distance Relays by Including In-feed Current Effects in an Adaptive Scheme [Volume 27, Issue 7, 2014, Pages 1051-1060]
-
Azari Nasrabad, F.
Adaptive Image Dehazing via Improving Dark Channel Prior [Volume 32, Issue 2, 2019, Pages 249-255]
-
Azaron, A.
Dynamic Multi Period Production Planning Problem with Semi Markovian Variable Cost (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 269-274]
-
Azaron, A.
Longest Path in Networks of Queues in the Steady-State [Volume 17, Issue 1, 2004, Pages 33-50]
-
Azaron, A.
Bicriteria Resource Allocation Problem in Pert Networks [Volume 17, Issue 2, 2004, Pages 157-168]
-
Azaron, A.
Optimal Control of Service Rate in a Service Center with Lapse (Research Note) [Volume 17, Issue 3, 2004, Pages 289-298]
-
Azaron, A.
Multi-Objective Lead Time Control in Multistage Assembly Systems (TECHNICAL NOTE) [Volume 18, Issue 4, 2005, Pages 359-370]
-
Azazari.khosroshahi, rasoul
The Influence Of Process Control Agent (P.C.A)’S State on Expedition of Mechanical Alloying of Anostructure Tial(Γ) Alloy [Volume 23, Issue 2, 2010, Pages 139-146]
-
Azazari.khosroshahi, rasoul
Studying the Effect of Productive Factors on Synthesis of Anostructure Tial (Γ) Alloy By Mechanical Alloying [Volume 23, Issue 2, 2010, Pages 147-156]
-
Azazari.khosroshahi, rasoul
Synthesis of Nanostructure Ti-45Al-5Cr Alloy by Mechanical Alloying and Study the Effect of Cr Addition on Microstructure of TiAl Alloy [Volume 24, Issue 2, 2011, Pages 123-130]
-
Azdast, T
Tensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes [Volume 31, Issue 3, 2018, Pages 504-510]
-
Azdast, T
Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
-
Azdast, T.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Azhar, F. H
Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
-
Azhar, F. H
The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
-
Azhari, M.
Elastic Initial and Post-local Buckling of Profiled through Girders [Volume 12, Issue 1, 1999, Pages 1-12]
-
Azhari, S. J .
A Novel Data Compression Technique for 420 Ma Current Loop Transmitters [Volume 14, Issue 1, 2001, Pages 35-40]
-
Azhdari, K.
Magnetic and Electerical Resistivity Behavior of Amorphous Ni Co P Films [Volume 10, Issue 2, 1997, Pages 85-90]
-
Azhdari Moghaddam, M.
Analysis and Design of a Simple Surge Tank (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 339-345]
-
Azid, Ishak Abd
House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]
-
Azimi, E.
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Azimi, Hamed
Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
-
Azimi, Y
Fuzzy Wastewater Quality Index Determination for Environmental Quality Assessment under Uncertain and Vagueness Conditions [Volume 31, Issue 8, 2018, Pages 1196-1204]
-
Azimi, Y
Prediction of Seismic Wave Intensity Generated by Bench Blasting Using Intelligence Committee Machines [Volume 32, Issue 4, 2019, Pages 617-627]
-
Azimi, Y.
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Azimian, A. R.
Turbulent Flow over Cars [Volume 11, Issue 3, 1998, Pages 157-166]
-
Azimian, A. R.
Flow Analysis Heat and Mass Transfer in a Room [Volume 12, Issue 3, 1999, Pages 165-178]
-
Azimian, A. R.
Calculation of Complicated Flows, Using First and Second-Order Schemes (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 269-278]
-
Azimirad, V.
Investigation on the Effect of Different Parameters in Wheeled Mobile Robot Error (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 195-210]
-
Azimirad, V.
An Intelligent Vision System on a Mobile Manipulator [Volume 21, Issue 3, 2008, Pages 279-294]
-
Aziz, F
Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
-
Aziz, G. S.
A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
-
Aziz, H. A.
Removal of Coliform, Suspended Solids, UV254 and Colour Using Zeolite and Activated Carbon in Riverbank Filtration System [Volume 33, Issue 5, 2020, Pages 732-736]
-
Azizan, A.
Microbial Desulfurization of Malaysian Coal in Batch Process using Mixed Culture (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-234]
-
Azizi, Abbas
Removal of Strontium Ions by Synthetic Nano Sodalite Zeolite from Aqueous Solution [Volume 29, Issue 2, 2016, Pages 160-169]
-
Azizi, Jaber
Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
-
Azizi, Jamal
Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
-
Azizi, K.
Computational Fluid Dynamic- Two Fluid Model Study of Gas-Solid Heat Transfer in a Riser with Various Inclination Angles [Volume 30, Issue 4, 2017, Pages 464-472]
-
Azizi, M. J.
Time Series Forecasting of Bitcoin Price Based on Autoregressive Integrated Moving Average and Machine Learning Approaches [Volume 33, Issue 7, 2020, Pages 1293-1303]
-
Azizi, Mohammad
Kinetic Study of Niobium Carbide Coating Formation on AISI L2 Steel using Thermo-Reactive Deposition Technique [Volume 23, Issue 1, 2010, Pages 77-86]
-
Azizi, S
Quality Factor of Free In-plane Vibration of a Fully Clamped Rectangular Micro-plate [Volume 31, Issue 1, 2018, Pages 96-103]
-
Azizi, S.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Azizi, Vahid
Lot Streaming in No-wait Multi Product Flowshop Considering Sequence Dependent Setup Times and Position Based Learning Factors [Volume 28, Issue 7, 2015, Pages 1031-1039]
-
Azizi, Y.
A New Uniformly Ultimate Boundedness Criterion for Temperature Dependent Average Bristle Deflections [Volume 33, Issue 6, 2020, Pages 1128-1133]
-
Azizian, D.
Mitigation Transformer Inrush Current Using Modified Transient Current Limiter [Volume 32, Issue 5, 2019, Pages 701-709]
-
Azizian, D.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Azizian, H.
The Comparison of Punching Shear Capacity in Solid and Void Two-Way Slabs on Soil Substrate in Relation to Spring Stiffness Changes [Volume 33, Issue 10, 2020, Pages 1872-1885]
-
Azizifard, A.
Sustainable Surface Water Management and Wastewater Treatment Plant Location: A Case Study of Urmia Lake [Volume 33, Issue 4, 2020, Pages 621-630]
-
Azizmohammadi, Roozbeh
Solving a Redundancy Allocation Problem by a Hybrid Multi-objective Imperialist Competitive Algorithm [Volume 26, Issue 9, 2013, Pages 1031-1042]
-
Azizollah Ganji, B.
The Effect of Material Properties on Sensitivity of the Microelectromechanical Systems Piezoelectric Hydrophone [Volume 30, Issue 12, 2017, Pages 1848-1855]
-
Azizollah Ganji, B.
A Novel Metamaterial Microelectromechanical Systems Phase Shifter with High Phase Shift and High Bandwidth [Volume 32, Issue 8, 2019, Pages 1163-1168]
-
Azizollah Ganji, bahram
Simulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm [Volume 30, Issue 6, 2017, Pages 846-850]
-
Azizpour, A.
Probability Approach for Prediction of Pitting Corrosion Fatigue Life of Custom 450 Steel [Volume 31, Issue 10, 2018, Pages 1773-1781]
-
Azizuddin, Md.
Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]
-
Azizyan, G.
Experimental Modeling and Evaluation Sediment Scouring in Riverbeds around Downstream in Flip Buckets [Volume 33, Issue 10, 2020, Pages 1904-1916]
-
Az-Zahra, N.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
B
-
Babaee Darband, Jaber
An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
-
Babaei, M.
Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
-
Babaei, M.
Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures [Volume 36, Issue 3, 2023, Pages 594-603]
-
Babaei, Masome Sadat
Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
-
Babaei, Mehdi
Novel Amine Modified Nanoporous SBA-15 Sorbent for the Removal of H2S from Gas Streams in the Presence of CH4 (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1697-1704]
-
Babaei, M. R.
Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink [Volume 35, Issue 5, 2022, Pages 943-953]
-
Babaei, R.
Research and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 193-201]
-
Babaeimorad, S.
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Babaeinik, M.
Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
-
Babagoli, M.
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Babaheydari, R M
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Babaheydari, R. M.
Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying [Volume 33, Issue 9, 2020, Pages 1759-1765]
-
Babaheydari, R. M.
Prediction of Hardness of Copper-based Nanocomposites Fabricated by Ball-milling using Artificial Neural Network [Volume 36, Issue 10, 2023, Pages 1932-1941]
-
Babai, H
Process Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays [Volume 31, Issue 5, 2018, Pages 712-718]
-
Babaie, M.
A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
-
Babaie, Mohammad Javad
A DFT Based Secondary Average Controller for Voltage/Frequency Regulation and Active/Reactive Power Sharing of AC Microgrids [(Articles in Press)]
-
Babakoohi, S.
The Analysis of Longitudinal Shrinkage in Butt Weld Joint (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 197-202]
-
Babayan, M.T.
Computer Simulation of Hydrodynamic Behavior of Aggregative Fluidized Beds [Volume 2, Issue 1, 1989, Pages 55-64]
-
Babazadeh, Saeedeh
Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
-
Babenko, V.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Babenko, V.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Baboli, Armand
Comparing Three Proposed Meta-heuristics to Solve a New p-hub Location-allocation Problem [Volume 26, Issue 9, 2013, Pages 1043-1058]
-
Babu, T. G.
Conglomerate Energy Efficient Elgamal Encryption Based Data Aggregation Cryptosystems in Wireless Sensor Network [Volume 35, Issue 2, 2022, Pages 417-424]
-
BABU, SAMUEL
A Closed Loop Control of Quadratic Boost Converter Using PID Controller [Volume 27, Issue 11, 2014, Pages 1653-1662]
-
Babulu, K
Low Power March Memory Test Algorithm for Static Random Access Memories (TECHNICAL NOTE) [Volume 31, Issue 2, 2018, Pages 292-298]
-
Babyr, N. V.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Babyr, Nikita
Land assessment in mining regions considering ecology [(Articles in Press)]
-
Babyr, N. V.
Topical Themes and New Trends in Mining Industry: Scientometric Analysis and Research Visualization [Volume 37, Issue 2, 2024, Pages 439-451]
-
Badaghei, R.
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Badal, T.
Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
-
Badie, K.
A Compositional Adaptation-based Approach for Recommending Learning Resources in Software Development [Volume 35, Issue 7, 2022, Pages 1317-1329]
-
Badie, K.
A Fuzzy Fusion Framework for Generating Purpose-oriented Texts [Volume 36, Issue 7, 2023, Pages 1219-1229]
-
Badie, K.
A Hybrid Approach to Detect Researchers’ Communities Based on Deep Learning and Game Theory [Volume 36, Issue 11, 2023, Pages 2052-2062]
-
Badie, Kambiz
A Context-aware Architecture for Mental Model Sharing through Semantic Movement in Intelligent Agents [Volume 25, Issue 3, 2012, Pages 233-248]
-
Badiei, Elaheh
Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
-
Badjian, Hamed
Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
-
Badri, Seyed Amin
A Mathematical Method for Managing the System Constraint [Volume 24, Issue 1, 2011, Pages 37-47]
-
Badv, K.
Numerical Evaluation of Two-dimensional Multi-layer Cover System to Regulate Acid Mine Drainage of Tailing Dams [Volume 36, Issue 10, 2023, Pages 1839-1856]
-
Baghaeinejad, M
A Novel Method for Modeling and Simulation of Asymmetrical Impedance-source Converters [Volume 31, Issue 5, 2018, Pages 741-751]
-
Baghel, K. P. S.
Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
-
Baghel, K. P. S.
Performance Modeling of Machining System with Mixed Standby Components Balking and Reneging [Volume 17, Issue 2, 2004, Pages 169-180]
-
Baghel, K. P. S.
N-Policy for M/G/1 Machine Repair Model with Mixed Standby Components, Degraded Failure and Bernoulli Feedback [Volume 17, Issue 3, 2004, Pages 279-288]
-
Baghel, K. P. S.
Diffusion Process for GGR Machining System with Spares, Balking and Reneging (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 49-54]
-
Bagheri, A.
Optimal Node Selection for Cooperative Spectrum Sensing in Cognitive Radio Sensor Networks with Energy Harvesting [Volume 37, Issue 5, 2024, Pages 833-841]
-
Bagheri, Ahmad
GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 135-143]
-
Bagheri, Ahmad
Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
-
Bagheri, Ahmad
Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
-
Bagheri, Ahmad
Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
-
Bagheri, Ahmad
Receding Horizon Based Control of Disturbed Upright Balance with Consideration of Foot Tilting(RESEARCH NOTE) [Volume 26, Issue 10, 2013, Pages 1243-1254]
-
Bagheri, Ahmad
Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
-
Bagheri, F.
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Bagheri, Faezeh
Robust Design of Dynamic Cell Formation Problem Considering the Workers Interest [Volume 32, Issue 12, 2019, Pages 1790-1797]
-
Bagheri, H.
Redesigning and Re-planning of Location, Pricing, Inventory and Marketing Decisions in a Multi-channel Distribution Network: A Case Study [Volume 36, Issue 2, 2023, Pages 420-432]
-
Bagheri, H.
Experimental Investigation and Thermodynamic Modeling of Zn+2 and Ni+2 Extraction from Zn Plant Residue using D2EHPA [Volume 36, Issue 11, 2023, Pages 2015-2027]
-
Bagheri, M.
Evaluation of Seismic Response of Concrete Structures Reinforced by Shape Memory Alloys (Technical Note) [Volume 33, Issue 3, 2020, Pages 410-418]
-
Bagheri, Masoud
A two Stage Heuristic Solution Approach for Resource Assignment during a Cell Formation Problem [Volume 26, Issue 9, 2013, Pages 943-954]
-
Bagheri, Mohammad Hadi
Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
-
Bagheri, Mozhgan
Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
-
Bagheri, N.
EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
-
Bagheri, Reza
Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
-
Bagheri-Esfe, H
A Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design [Volume 31, Issue 1, 2018, Pages 128-135]
-
Bagherifard, M.
Application of Incomplete Analytic Hierarchy Process and Choquet Integral to Select the best Supplier and Order Allocation in Petroleum Industry [Volume 33, Issue 11, 2020, Pages 2299-2309]
-
Bagheri Hosseinabadi, M.
Control of Electric Wheelchair Suspension System based on Biodynamic Response of Seated Human Body [Volume 33, Issue 8, 2020, Pages 1629-1636]
-
Bagheripour, E.
Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance [Volume 31, Issue 10, 2018, Pages 1609-1616]
-
Bagheripour, Ehsan
Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
-
Bagheripour, Ehsan
Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
-
Bagheripour, M.H.
Two and Three-Dimensional Seepage Analysis of Earth Dams Considering Horizontal Filter Blanket Effects (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 187-195]
-
Bagheripour Asil, M.
Utilization of Steel Micro-fiber and Carbon Nanotubes in Self-compacting Lightweight Concrete [Volume 36, Issue 5, 2023, Pages 955-964]
-
Bagheri Sharebabaki, F.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Bagherzadeh, E.
Oxidative Coupling of Methane to Ethylene Over Sodium Promoted Manganese Oxide [Volume 3, Issue 3, 1990, Pages 104-111]
-
Bagherzadeh, M.
An Upper Bound Approach for Analysis of Hydroforming of Sheet Metals [Volume 17, Issue 4, 2004, Pages 389-398]
-
Baghmolaei, M.M.
Operation Analysis of Rotary Tools of Compressor Station Using Exergy Approach [Volume 27, Issue 12, 2014, Pages 1815-1822]
-
Bahadornejad, Momen
A New Adaptive Load-Shedding and Restoration Strategy for Autonomous Operation of Microgrids: A Real-Time Study [Volume 33, Issue 1, 2020, Pages 82-91]
-
Bahar, F.
An Improved Modular Modeling for Analysis of Closed-Cycle Absorption Cooling Systems [Volume 21, Issue 1, 2008, Pages 57-70]
-
Bahar, H. B.
Engineering Application Of Correlation on Ann Estimated Mass [Volume 15, Issue 2, 2002, Pages 157-166]
-
Baharmast, Ashkan
Evaluation of Column-Tree Moment Resisting Connection with End Plates and Haunched Beam (RESEARCH NOTE) [Volume 28, Issue 12, 2015, Pages 1702-1710]
-
Baharmast, Hessam
Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
-
Baharom, A.
Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
-
Baharvandi, Hamid reza
Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
-
Baheri Islami, S.
Transonic Turbulent Flow Simulation using Pressure-Based Method and Normalized Variable Diagram [Volume 17, Issue 3, 2004, Pages 299-310]
-
Baheta, Aklilu
Heat Transfer Coefficients Investigation for TiO2 Based Nanofluids [Volume 32, Issue 10, 2019, Pages 1491-1496]
-
Bahi, Lahcen
Shrinkage Curve: Experimental Study and Modelling [Volume 25, Issue 3, 2012, Pages 203-210]
-
Bahjat, S.
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Bahmani, H.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Bahmani, H.
3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
-
Bahoosh-Kazerooni, R.
A “v2-f Based” Macroscopic K-Ε Model for Turbulent Flow through Porous Media [Volume 21, Issue 2, 2008, Pages 195-212]
-
Bahraini, Sina
Inverse Boundary Design Problem of Combined Radiation-convection Heat Transfer in Laminar Recess Flow [Volume 29, Issue 3, 2016, Pages 394-402]
-
Bahrami, L.
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Bahrami, M.
Optimal Sliding-Mode Guidance Law for Fixed-Interval Propulsive Maneuvers [Volume 21, Issue 2, 2008, Pages 105-112]
-
Bahrami, M.
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Bahrami, N.
Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
-
Bahrami Kian, Y.
Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
-
Bahrebar, M.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Bahreva, M. A.
Role of Calcium Content in Dissolution Kinetics of Iranian Borate Minerals in Sulfuric Acid [Volume 16, Issue 3, 2003, Pages 293-300]
-
Bahrevar, Mohammad-Ali
Electrophoretic Synthesis of Titanium Oxide Nanotubes [Volume 25, Issue 4, 2012, Pages 343-350]
-
Bahrevar, Mohammad-Ali
Ethanol-based Tape Casting Process of the Textured Bi0.5(Na0.80K0.20)0.5TiO3-BiFeO3 Ceramics [Volume 28, Issue 4, 2015, Pages 561-566]
-
Bai, L.
Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
-
Baig, M. A.
Probabilistic Damage Analysis of Isolated Steel Tub Girder Bridge Excited by Near and Far Fault Ground Motions [Volume 36, Issue 2, 2023, Pages 289-298]
-
Bailin, FAN
Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
-
Baimukhametov, G. F.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Bakar, W. A. W. A
Biodiesel Production via Transesterification of Low Grade Cooking Oil over Heterostructure Nano Particles of Ni/Mg/Al2O3 Catalyst [Volume 31, Issue 8, 2018, Pages 1318-1325]
-
Bakeri, N. A
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Bakhshan, Y.
Estimating Solar Radiation and Developing Iran’s Atlas Map of Optimum Monthly Tilt Angle (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1197-1204]
-
Bakhshan, Y.
The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
-
Bakhshan, Y.
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Bakhshandeh, Mohammad Reza
Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
-
Bakhshandeh Amnieh, H.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Bakhshandeh Amnieh, H.
Application of Finite Element Method for Simulation of Rock Mass Caving Processes in Block Caving Method [Volume 36, Issue 1, 2023, Pages 139-151]
-
Bakhshi, H
Using the Genetic Algorithm based on the Riedel Equation to Predict the Vapor Pressure of Organic Compounds [Volume 31, Issue 6, 2018, Pages 863-869]
-
Bakhshi, H. R.
A New Algorithm for the Deinterleaving of Radar Pulses [Volume 10, Issue 3, 1997, Pages 143-152]
-
Bakhshi, saeed reza
Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
-
Bakhshi, Z.
Phenol Biodegradation Kinetics in the Presence of Supplimentary Substrate [Volume 25, Issue 3, 2012, Pages 181-192]
-
Bakhshi-Jooybari, M.
Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming [Volume 32, Issue 4, 2019, Pages 587-595]
-
Bakhshi-Jooybari, M.
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming [Volume 33, Issue 5, 2020, Pages 906-915]
-
Bakhshi-Jooybari, M.
Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
-
Bakhshi Khaniki, Hessam
Free Vibration Analysis of Functionally Graded Materials Non-uniform Beams [Volume 29, Issue 12, 2016, Pages 1734-1740]
-
Bakhshi Khaniki, Hossein
Analytical Solution for Free Vibration of a Variable Cross-Section Nonlocal Nanobeam [Volume 29, Issue 5, 2016, Pages 688-696]
-
Bakhshi Khaniki, Hossein
Free Vibration Analysis of Functionally Graded Materials Non-uniform Beams [Volume 29, Issue 12, 2016, Pages 1734-1740]
-
Bakhshi Khaniki, Hossein
Free Vibration Analysis of Nonuniform Microbeams Based on Modified Couple Stress Theory: an Analytical Solution [Volume 30, Issue 2, 2017, Pages 311-320]
-
Bakhshi-Khaniki, H.
Integrated Dynamic Cellular Manufacturing Systems and Hierarchical Production Planning with Worker Assignment and Stochastic Demand [Volume 36, Issue 2, 2023, Pages 348-359]
-
Bakhti, I.
Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
-
Bakhtiari, Leila
Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
-
Bakhtiari Nejad, F.
Air-Fuel Ratio Control of a Lean Burn SI Engine Using Fuzzy Self Tuning Method [Volume 13, Issue 2, 2000, Pages 45-54]
-
Bakhtiari-Nejad, F.
Analysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives [Volume 21, Issue 1, 2008, Pages 85-96]
-
Balaji, B.
Performance Analysis and Optimization of Asymmetric Front and Back Pi Gates with Dual Material in Gallium Nitride High Electron Mobility Transistor for Nano Electronics Application [Volume 36, Issue 7, 2023, Pages 1269-1277]
-
Balaji, B.
Design and Qualitative Analysis of Hetero Dielectric Tunnel Field Effect Transistor Device [Volume 36, Issue 6, 2023, Pages 1129-1135]
-
Balaji, B.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Balaji, B.
Design and Analysis of Hetero Dielectric Dual Material Gate Underlap Spacer Tunnel Field Effect Transistor [Volume 36, Issue 12, 2023, Pages 2137-2144]
-
Balaji, B.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
-
Balaji, B.
Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
-
Balaji, B.
Gate Oxide Thickness and Drain Current Variation of Dual Gate Tunnel Field Effect Transistor [Volume 37, Issue 3, 2024, Pages 520-528]
-
Balaji, B.
Design and Analysis of Symmetrical Dual Gate Tunnel Field Effect Transistor with Gate Dielectric Materials in 10nm Technology [Volume 37, Issue 4, 2024, Pages 588-595]
-
Balaji, B.
Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node [Volume 37, Issue 5, 2024, Pages 887-895]
-
Balaji, B.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Balaji, B.
Design and Performance Analysis of Gate Overlap Dual Material Tunnel Field Effect Transistor [Volume 37, Issue 9, 2024, Pages 1773-1779]
-
Balaji, B.
An Improved Structure and Analysis of Asymmetrical Spacer Nanowire Tunnel Field Effect Transistor [(Articles in Press)]
-
Balali, S.
A Stochastic Model for Indirect Condition Monitoring Using Proportional Covariate Model [Volume 21, Issue 1, 2008, Pages 45-56]
-
Balamurali, K.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Balamurugan, V.
Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
-
Balasubramanian, Kannan
Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
-
Baleghi, Y.
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Baleghi Damavandi, Y.
Plant Classification in Images of Natural Scenes Using Segmentations Fusion [Volume 33, Issue 9, 2020, Pages 1743-1750]
-
Baleghi Damavandi, Y.
A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
-
Baleghi Damavandi, Y.
A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
-
Baleghi Damavandi, Yasser
On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
-
Baleghi Damavandi, Yasser
A Comparative Study of VHDL Implementation of FT-2D-cGA and FT-3D-cGA on Different Benchmarks (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1276-1285]
-
Ball, Kenneth S.
Turbulent Drag Reduction by Spanwise Wall Oscillations [Volume 21, Issue 1, 2008, Pages 85-104]
-
Balogun, V. A
Energy Efficiency Analyses of Toolpaths in a Pocket Milling Process [Volume 31, Issue 5, 2018, Pages 847-855]
-
Balogun, Vincent
Electrical Energy Demand Modeling of 3D Printing Technology for Sustainable Manufacture [Volume 29, Issue 7, 2016, Pages 954-961]
-
Balogun, Vincent A.
Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy [Volume 30, Issue 4, 2017, Pages 591-596]
-
Baloni, J.
Mathematical Modeling for Homogeneous Tumor with Delay in Time [Volume 22, Issue 1, 2009, Pages 49-56]
-
Bambaeechee, Mohsen
Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
-
Bamdad, S.
Designing a Sustainable Reverse Logistics Network Considering the Conditional Value at Risk and Uncertainty of Demand under Different Quality and Market Scenarios [Volume 33, Issue 11, 2020, Pages 2252-2271]
-
Bameni Moghadam, Mohammad
Application of a Cost-Driven Optimization Method in Beer Brewing Process [Volume 17, Issue 1, 2004, Pages 59-70]
-
Banaei, Farid
Dynamic Performance Analysis and Simulation of a Full Scale Activated Sludge System Treating an Industrial Wastewater Using Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 465-472]
-
Banafati Zadeh, F.
Glutaraldehyde: Introducing Optimum Condition for Cross-linking the Chitosan/Gelatin Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1967-1980]
-
Banai, A.
Adaptive Unstructured Grid Generation Scheme for Solution of the Heat Equation [Volume 13, Issue 4, 2000, Pages 43-54]
-
Bandani, A.
Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications [Volume 35, Issue 5, 2022, Pages 875-882]
-
Band Band, H.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Banejad, M.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Banejad, M.
Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
-
Bang, S. V.
Enhanced Face Presentation Attack Prevention Employing Feature Fusion of Pre-trained Deep Convolutional Neural Network Model and Thepade's Sorted Block Truncation Coding [Volume 36, Issue 4, 2023, Pages 807-816]
-
Baniamerian, Z
A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold [Volume 31, Issue 3, 2018, Pages 487-494]
-
Baniamerian, Z.
A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
-
Baniamerian, Zahra
Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
-
Baniamerian, Zahra
A Numerical Investigation on Aerodynamic Coefficients of Solar Troughs Considering Terrain Effects and Vortex Shedding [Volume 28, Issue 6, 2015, Pages 940-948]
-
Baniasad Askari, I.
Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
-
Banihashemi, S. A.
Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
-
Bani Mostafa Arab, N.
The Effect of Rapid Deformation Process to Improve Creep and Tensile Resistance of AZ91 Magnesium Alloy Plates [Volume 33, Issue 10, 2020, Pages 2039-2046]
-
Bani Mostafa Arab, Nasrollah
Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
-
Bani Mostafa Arab, Nasrollah
Investigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites [Volume 28, Issue 9, 2015, Pages 1382-1391]
-
Bani Rostam, T.
Experimental Analysis for Measuring Errors in Wheeled Mobile Robots (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 115-133]
-
Banks, S. P.
On the Approximation of Pseudo Linear Systems by Linear Time Varying Systems (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 29-32]
-
Bannae Sharifian, M. B.
Novel Unified Control Method of Induction and Permanent Magnet Synchronous Motors [Volume 32, Issue 2, 2019, Pages 256-269]
-
Bao, LP.
Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
-
Bao, W.
An Incentive Mechanism for Energy Internet of Things Based on Blockchain and Stackelberg Game [Volume 36, Issue 8, 2023, Pages 1468-1477]
-
Baoyi, Chen
EXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 73-80]
-
Baradaran, Gholam hosein
Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
-
Baradaran, Gholamhosein
Element Free Galerkin Method for Static Analysis of Thin Micro/Nanoscale Plates Based on the Nonlocal Plate Theory [Volume 26, Issue 7, 2013, Pages 795-806]
-
Baradaran, Gholam Hossein
Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
-
Baradaran Rahimi, A.
Freezing in a Finite Slab Using Extensive Perturbation Expansions Method [Volume 9, Issue 2, 1996, Pages 29-35]
-
Baradaran Rahimi, A.
Pressure Calculation in the Flow Between Two Rotating Eccentric Cylinders at High Renolds Numbers [Volume 9, Issue 4, 1996, Pages 201-210]
-
Baradaran Rahimi, A.
Analytic Solution for Hypersonic Flow Past a Slender Elliptic Cone Using Second-Order Perturbation Approximations [Volume 13, Issue 4, 2000, Pages 23-34]
-
Baradaran Rahimi, A.
Transient Natural Convection Flow on an Isothermal Vertical Wall at High Prandtl Numbers: Second-Order Approximation [Volume 14, Issue 4, 2001, Pages 367-376]
-
Baradaran Rahimi, A.
A New Approach in Preliminary Design of Closed Loop Solar Thermal Systems (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 383-390]
-
Baradaran Rahimi, A.
Unsteady Free Convection from a Sphere in a Porous Medium with Variable Surface Temperature [Volume 18, Issue 4, 2005, Pages 331-350]
-
Baradaran Rahimi, A.
Axi-symmetric Stagnation–Point Flow and Heat Transfer Obliquely Impinging on a Rotating Circular Cylinder [Volume 20, Issue 1, 2007, Pages 67-82]
-
Baradaran Rahimi, A.
A Numerical Study of Flow and Heat Transfer Between Two Rotating Vertically Eccentric Spheres with Time- Dependent Angular Velocities [Volume 21, Issue 3, 2008, Pages 295-318]
-
Baradaran Rahimi, A.
NUMERICAL MODELING OF CHARRING MATERIAL ABLATION WITH CONSIDERING CHEMICAL REACTION, MASS TRANSFER AND SURFACE HEAT TRANSFER EFFECTS [Volume 25, Issue 1, 2012, Pages 57-64]
-
Baradaran Rahimi, A.
Comparison of Lift and Drag Forces for Some Conical Bodies in Supersonic Flow Using Perturbation Techniques [Volume 25, Issue 3, 2012, Pages 231-238]
-
Baradaran Rahimi, A.
Estimation of the Strength of the Time-dependent Heat Source using Temperature Distribution at a Point in a Three Layer System [Volume 25, Issue 4, 2012, Pages 389-398]
-
Barahmand, N.
Hybrid Artificial Intelligence Model Development for Roller-compacted Concrete Compressive Strength Estimation [Volume 33, Issue 10, 2020, Pages 1852-1863]
-
Barati, A.
Generation Process and Performance Evaluation of Engineered Microsphere Agarose Adsorbent for Application in Fluidized-bed Systems [Volume 33, Issue 8, 2020, Pages 1450-1458]
-
Barati, F.
Stable Operation Limits in Dual Active Bridge for SuperCapacitor Applications [Volume 35, Issue 5, 2022, Pages 875-882]
-
Barati, Mahmoud
The Effect of Normal Anisotropy on Thin-Walled Tube Bending [Volume 26, Issue 1, 2013, Pages 83-90]
-
Barati, Sara
Simulation of Convective Heat Transfer of a Nanofluid in a Circular Cross-section [Volume 26, Issue 6, 2013, Pages 571-576]
-
Barazandeh, A.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Barforoshi, T
Distributed Generation Expansion Planning Considering Load Growth Uncertainty: A Novel Multi-Period Stochastic Model [Volume 31, Issue 3, 2018, Pages 405-414]
-
Barforoushi, T.
Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
-
Bargegol, I.
Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
-
Bargegol, I.
Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
-
Barkhordari, K.
The Effect of Using Reinforced Granular Blanket and Single Stone Column on Improvement of Sandy Soil: Experimental Study [Volume 36, Issue 8, 2023, Pages 1532-1547]
-
Barkhordari, K.
Improvement of Sand Soil with Bio-micropiles and Bio-grout Injection in Reinforced Soils [Volume 37, Issue 6, 2024, Pages 1076-1084]
-
Barkhordari, Kazem
Effects of Cement and Mineral Polymer on Geotechnical Properties of Silty Sand as the Base Material [(Articles in Press)]
-
Barkhordari, M. S.
Ranking Passive Seismic Control Systems by Their Effectiveness in Reducing Responses of High-Rise Buildings with Concrete Shear Walls Using Multiple-Criteria Decision Making [Volume 33, Issue 8, 2020, Pages 1479-1490]
-
Barkhordari, M.S.
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Barnabas, Kingston
Optimization of Minimum Quantity Liquid Parameters in Turning for the Minimization of Cutting Zone Temperature [Volume 25, Issue 4, 2012, Pages 327-340]
-
Barrios, A. M.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Barton, A. P.
Electrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel [Volume 4, Issue 1, 1991, Pages 53-64]
-
Barzegar, B.
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Barzegar, Behnam
Energy Aware Strategies for Scheduling Precedence Constrained Parallel Tasks in DVFS-enabled Cloud Datacenter [(Articles in Press)]
-
Barzegar, Ramin
Three Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge [Volume 25, Issue 4, 2012, Pages 311-320]
-
Barzegar-Mohammadi, M.
A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
-
Barzegar Nozari, R.
A Novel Trust Computation Method Based on User Ratings to Improve the Recommendation [Volume 33, Issue 3, 2020, Pages 377-386]
-
Barzinpour, F
A Multi-objective Hierarchical Location-allocation Model for the Healthcare Network Design Considering a Referral System [Volume 31, Issue 2, 2018, Pages 365-373]
-
Baseri, Hamid
Nusselt Number Estimation along a Wavy Wall in an Inclined Lid-driven Cavity using Adaptive Neuro-Fuzzy Inference System (ANFIS) [Volume 26, Issue 4, 2013, Pages 383-392]
-
Baseri, Hamid
A two-degree-of-freedom tool holder mechanism for real-time adjustment of the tool angles in turning process [(Articles in Press)]
-
Basheer Mahmood, B.
A Novel Methodology for Predicting Roadway Deterioration in Iraq [Volume 36, Issue 1, 2023, Pages 41-49]
-
Bashir, L.
A Novel Hybrid Model for Technology Strategy Formulating in High-tech Industries under Uncertainty: A Case Study [Volume 36, Issue 6, 2023, Pages 1166-1178]
-
Bashiri, M.
Re-configuration of the Relief Network Considering Uncertain Demand and Link Failure in an Earthquake: A Multi-stage Stochastic Programming [Volume 31, Issue 6, 2018, Pages 932-942]
-
Bashiri, M.
A Multi-district Asset Protection Problem with Time Windows for Disaster Management [Volume 31, Issue 11, 2018, Pages 1929-1934]
-
Bashiri, M.
Multi-commodity Multimodal Splittable Logistics Hub Location Problem with Stochastic Demands [Volume 31, Issue 11, 2018, Pages 1935-1942]
-
Bashiri, M.
A Lagrangian Decomposition Algorithm for Robust Green Transportation Location Problem [Volume 32, Issue 1, 2019, Pages 85-91]
-
Bashiri, M.
Integrated Linear Integer Model of a Fleet Allocation and Aircraft Routing Problem with Operational Constraints [Volume 36, Issue 4, 2023, Pages 669-681]
-
Bashiri, Mahdi
A Clustering Based Location-allocation Problem Considering Transportation Costs and Statistical Properties (RESEARCH NOTE) [Volume 26, Issue 6, 2013, Pages 597-604]
-
Bashiri, Mahdi
Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
-
Bashiri, Mahdi
A two Stage Heuristic Solution Approach for Resource Assignment during a Cell Formation Problem [Volume 26, Issue 9, 2013, Pages 943-954]
-
Bashiri, Mahdi
Capacitated Multimodal Structure of a Green Supply Chain Network Considering Multiple Objectives [Volume 26, Issue 9, 2013, Pages 963-974]
-
Bashiri, Mahdi
Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
-
Bashiri, Mahdi
A Reliable Multi-objective p-hub Covering Location Problem Considering of Hubs Capabilities [Volume 28, Issue 5, 2015, Pages 717-729]
-
Bashiri, Mahdi
Capacitated Single Allocation P-Hub Covering Problem in Multi-modal Network Using Tabu Search [Volume 29, Issue 6, 2016, Pages 797-808]
-
Bashiri, Mahdi
Bi-objectives Approach for a Multi-period Two Echelons Perishable Product Inventory-routing Problem with Production and Lateral Transshipment [Volume 30, Issue 6, 2017, Pages 876-886]
-
Basirat, R.
The Investigation of Subsidence Effect on Buried Pipes in 3D Space [Volume 30, Issue 8, 2017, Pages 1182-1189]
-
Basirat Tabrizi, H.
Performance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 884-892]
-
Basirat Tabrizi, H.
Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
-
Basirat Tabrizi, H.
Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
-
Basirat Tabrizi, H.
Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study [Volume 35, Issue 1, 2022, Pages 237-247]
-
Basiri, Hassan
Hexadecyl Trimethyl Ammonium Bromide-Modified Montmorillonite as a Low-Cost Sorbent for the Removal of Methyl Red from Liquid-Medium [Volume 29, Issue 1, 2016, Pages 60-67]
-
Basiri, Mohammad Hosein
Reliability and Risk Assessment of Electric Cable Shovel at Chadormalu Iron Ore Mine in Iran [Volume 33, Issue 1, 2020, Pages 170-177]
-
Basirjafari, S.
Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
-
Basir Jafari, S.
Acousto-Refrigerator with an Adjustable Mechanical Resonator (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 183-196]
-
Basir Jafari, S.
Validation of Shell Theory for Modeling the Radial Breathing Mode of a Single-Walled Carbon Nanotube (RESEARCH NOTE) [Volume 26, Issue 4, 2013, Pages 447-454]
-
Basnet, Ritu
Finite Capacity Queuing System with Vacations and Server Breakdowns [Volume 24, Issue 4, 2011, Pages 387-394]
-
Basori, B.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Basri, H
Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
-
Bassiri, M.H.
Experiments To Determine The Simulated Annealing Parameters Case Study In VRP [Volume 17, Issue 1, 2004, Pages 71-80]
-
Bastani, D.
Reducing the Limitation on Application of Synchronous Decorrelating Detector Cdma Systems [Volume 14, Issue 2, 2001, Pages 107-112]
-
Bastani, D.
Stagewise Modeling of Liquid-Liquid Extraction Column (RDC) [Volume 17, Issue 1, 2004, Pages 7-17]
-
Basti, Ali
Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH) [Volume 26, Issue 5, 2013, Pages 515-522]
-
Basu, A.
Optimal Load of Flexible Joint Mobile Robots Stability Approach [Volume 17, Issue 2, 2004, Pages 193-204]
-
Basu, A.
Design and Real Time Digital Simulator Implementation of a Takagi Sugeno Fuzzy Controller for Battery Management in Photovoltaic Energy System Application [Volume 35, Issue 12, 2022, Pages 2275-2282]
-
Basu, R.
Bioreactor Scale-up for Water-Gas Shift Reaction [Volume 9, Issue 3, 1996, Pages 121-129]
-
Basu, S. K.
Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
-
Batubara, F.
Variations of Organic Loading Rate on Tofu Wastewater Degradation using Upflow Anaerobic Sludge Blanket Reactor by Modified Stover-Kincannon Model [Volume 36, Issue 3, 2023, Pages 490-496]
-
Bäßler, R.
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
-
Bayadi, A.
Inrush Current Reduction by a Point-on-wave Energization Strategy and Sequential Phase Shifting in Three-Phase Transformer [Volume 35, Issue 12, 2022, Pages 2321-2328]
-
Bayani, Rasoul
Experimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter [Volume 29, Issue 9, 2016, Pages 1292-1299]
-
Bayat, H
A Prioritization Model for HSE Risk Assessment Using Combined Failure Mode, Effect Analysis, and Fuzzy Inference System: A Case Study in Iranian Construction Industry [Volume 31, Issue 9, 2018, Pages 1487-1497]
-
Bayat, M.
Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
-
Bayat, O.
Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
-
Bayati, Nasrin
Pattern Recognition in Control Chart Using Neural Network based on a New Statistical Feature [Volume 30, Issue 9, 2017, Pages 1372-1380]
-
Bayee, P.
Experimental Investigations on Behaviour of Rhamnolipid Biosurfactant as a Green Stabilizer for the Biological Synthesis of Gold Nanoparticles [Volume 33, Issue 6, 2020, Pages 1054-1060]
-
Baygan, Majid
More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
-
Bazoobandi, H.
Wavelet Neural Network with Random Wavelet Function Parameters [Volume 30, Issue 10, 2017, Pages 1510-1516]
-
Bazoobandi, Hojjat Allah
A Differential Evolution and Spatial Distribution based Local Search for Training Fuzzy Wavelet Neural Network [Volume 27, Issue 8, 2014, Pages 1185-1194]
-
Bazrafshan, Morteza
Developing a Data Envelopment Analysis Model for a Smart Sustainable Multi-Echelon Supply Chain Using Natural, Managerial, and Free Disposal Hulls: An Approach using Bootstrap Simulation [(Articles in Press)]
-
Bazzazi, A.
An Effective Model for SMS Spam Detection Using Content-based Features and Averaged Neural Network [Volume 33, Issue 2, 2020, Pages 221-228]
-
Bazzazi, M.
Multi-Objective Unrelated Parallel Machines Scheduling with Sequence-Dependent Setup Times and Precedence Constraints [Volume 21, Issue 3, 2008, Pages 269-278]
-
Beatrice Seventline, J.
Estimation of Roughness Parameters of A Surface Using Different Image Enhancement Techniques (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 652-658]
-
Beddar, M.
Optimizing of Steel Fiber Reinforced Concrete Mix Design [Volume 17, Issue 1, 2004, Pages 41-50]
-
Behbahani, H.
Control of Engineering Properties of Asphalt Concrete Based on Permanent Deformation Constraint of Subgrade at Tropical Zones in Iran (TECHNICAL NOTE) [Volume 14, Issue 3, 2001, Pages 195-200]
-
Behbahani, H.
Prediction of The Pavement Condition For Urban Roadway A Tehran Case Study (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 219-226]
-
Beheshti, H.
Performance Enhancement and Environmental Impact Analysis of a Solar Chimney Power Plant: Twenty-four-hour Simulation in Climate Condition of Isfahan Province, Iran [Volume 30, Issue 8, 2017, Pages 1260-1269]
-
Beheshti, Hamid
Numerical and Analytical Investigation in Radiated Noise by a Shock-Absorber [Volume 26, Issue 12, 2013, Pages 1525-1534]
-
Beheshtinia, M. A.
Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
-
Beheshty, M.H.
A Numerical Method for the Determination of an Effective Modules for Coated Glass Fibers Used in Phenolic Composites [Volume 13, Issue 3, 2000, Pages 1-10]
-
Behfar, R.
Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
-
Behfar, Rezvan
Pharmaceutical Wastewater Chemical Oxygen Demand Reduction: Electro-Fenton, UV-enhanced Electro-Fenton and Activated Sludge [Volume 32, Issue 12, 2019, Pages 1710-1715]
-
Behjat, S.
Quay Cranes and Yard Trucks Scheduling Problem at Container Terminals [Volume 33, Issue 9, 2020, Pages 1751-1758]
-
Behjat, Saeed
A Mathematical Model and Grouping Imperialist Competitive Algorithm for Integrated Quay Crane and Yard Truck Scheduling Problem with Non-crossing Constraint [Volume 32, Issue 10, 2019, Pages 1464-1479]
-
Behnam, K.
Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
-
Behnamfar, F
A Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls [Volume 31, Issue 2, 2018, Pages 220-227]
-
Behnamfar, F.
Seismic Design of Steel Structures Based on Ductility and Incremental Nonlinear Dynamic Analysis [Volume 29, Issue 1, 2016, Pages 23-30]
-
Behnamfar, F.
Analysis of Structural Vibrations due to Passage of Underground Trains [Volume 29, Issue 6, 2016, Pages 742-751]
-
Behnamfar, F.
A Fire Ignition Model and Its Application for Estimating Loss due to Damage of the Urban Gas Network in an Earthquake [Volume 29, Issue 11, 2016, Pages 1507-1519]
-
Behnamfar, F.
Soft Soil Seismic Design Spectra Including Soil-structure Interaction [Volume 30, Issue 10, 2017, Pages 1443-1450]
-
Behnamfar, F.
Response Spectra of Structures under Subway Induced Vibrations [Volume 31, Issue 12, 2018, Pages 2009-2015]
-
Behnamfar, F.
Development of Steel Yielding Seismic Dampers Used to Improve Seismic Performance of Structures: A Comprehensive Review [Volume 36, Issue 4, 2023, Pages 746-775]
-
Behrad Vakylabad, A.
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Behravesh, A.
Optimum Flat Grids [Volume 3, Issue 1, 1990, Pages 1-14]
-
Behravesh, A.
The Comparison of Punching Shear Capacity in Solid and Void Two-Way Slabs on Soil Substrate in Relation to Spring Stiffness Changes [Volume 33, Issue 10, 2020, Pages 1872-1885]
-
Behroozi, H.
Predicting the Empirical Distribution of Video Quality Scores Using Recurrent Neural Networks [Volume 33, Issue 5, 2020, Pages 984-991]
-
Behroozifar, Mahmoud
Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
-
Behrouz, Hosein
A two-degree-of-freedom tool holder mechanism for real-time adjustment of the tool angles in turning process [(Articles in Press)]
-
Behzad, M.
Vibration Analysis of Rotating Shaft with Loose Disk [Volume 15, Issue 4, 2002, Pages 385-393]
-
Behzad, M.
Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites [Volume 17, Issue 1, 2004, Pages 95-104]
-
Behzad, M.
A New Approach for Vibration Analysis of a Cracked Beam [Volume 18, Issue 4, 2005, Pages 319-330]
-
Behzadi, M.
Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
-
Behzadi, M.
Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
-
Behzadmehr, Amin
Optimum Shape Design of a Radiant Oven by the Conjugate Gradient Method and a Grid Regularization Approach [Volume 25, Issue 2, 2012, Pages 167-176]
-
Behzadnasab, M.
Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
-
Beidaghy Dizaji, Hossein
An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
-
Beigy, Hamid
A Two-Threshold Guard Channel Scheme for Minimizing Blocking Probability in Communication Networks [Volume 17, Issue 3, 2004, Pages 247-264]
-
Beiki, H.
Multi-objective Optimization of Multi-vehicle Relief Logistics Considering Satisfaction Levels under Uncertainty [Volume 33, Issue 5, 2020, Pages 814-824]
-
Beiki, H.
A Location-Routing Model for Assessment of the Injured People and Relief Distribution under Uncertainty [Volume 33, Issue 7, 2020, Pages 1274-1284]
-
Beiram, A. A. H.
Effect of using Waste Rubber as Partial Replacement of Coarse Aggregate on Torsional Strength of Square Reinforced Concrete Beam [Volume 35, Issue 2, 2022, Pages 397-405]
-
Beirami, B. A.
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Belahssen, Okba
Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
-
Belgara, L.
Optimizing of Steel Fiber Reinforced Concrete Mix Design [Volume 17, Issue 1, 2004, Pages 41-50]
-
BELHADJER, YOUNES
Optimizing DC Microgrid Systems for Efficient Electric Vehicle Battery Charging in Ain El Ibel, Algeria [(Articles in Press)]
-
Belkacem, S.
Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator [Volume 33, Issue 2, 2020, Pages 248-256]
-
Belkacem, S.
Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator [Volume 33, Issue 4, 2020, Pages 567-574]
-
Bell, T.
Glow Discharge Depth Profiling a Powerful Analytical Technique in Surface Engineering (TECHNICAL NOTE) [Volume 10, Issue 2, 1997, Pages 111-119]
-
Beltrán, Luis
Web Control and Monitoring System: Experimentation with Haematococcus Pluvialis (TECHNICAL NOTE) [Volume 26, Issue 3, 2013, Pages 219-228]
-
Benaggoune, S.
Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator [Volume 33, Issue 2, 2020, Pages 248-256]
-
Benaggoune, S.
Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator [Volume 33, Issue 4, 2020, Pages 567-574]
-
Ben aissia, Habib
Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
-
Ben aissia, Habib
Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
-
Ben aissia, Habib
Numerical Study of Interaction of Two Plane Parallel Jets [Volume 29, Issue 10, 2016, Pages 1421-1430]
-
Benalouach, M. A. K.
Flow Seals Parameters Analysis For Rotors [Volume 32, Issue 1, 2019, Pages 177-183]
-
Benamer, R
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Benbouhenni, H.
Amelioration Effectiveness of Torque and Rotor Flux Control Applied to the Asynchronous Generator for Dual-rotor Wind Turbine using Neural Third-order Sliding Mode Approaches [Volume 35, Issue 3, 2022, Pages 517-530]
-
Benbouzid, M. E
A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
-
Benbouziyane, J.
Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
-
Ben Bouziyane, J.
A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
-
Benchatti, A.
Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
-
Bendiabdellah, A.
A Proposed Approach for Separation between Short Circuit Fault, Magnetic Saturation Phenomenon and Supply Unbalance in Permanent Magnet Synchronous Motor [Volume 33, Issue 10, 2020, Pages 1968-1977]
-
Benmamoun, Z
Comparison of Inventory Models for Optimal Working Capital; Case of Aeronautics Company [Volume 31, Issue 4, 2018, Pages 605-611]
-
Bennabi, A.
Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
-
Benoudjit, D.
Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
-
Benouzza, N.
A Proposed Approach for Separation between Short Circuit Fault, Magnetic Saturation Phenomenon and Supply Unbalance in Permanent Magnet Synchronous Motor [Volume 33, Issue 10, 2020, Pages 1968-1977]
-
Benramache, Said
Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
-
Bensahal, D
The Effect of the Variation of Volume Flow Rate on the Thermal Parameters of a Solar Air Collector with a Single Pass of Air: Case Study for Laghouat, Algeria [Volume 31, Issue 1, 2018, Pages 71-78]
-
Bensahal, Djamel
Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
-
Bensahal, Djamel
Effects of Material and Geometrical Parameters on the Free Vibration of Sandwich Beams [Volume 29, Issue 2, 2016, Pages 222-228]
-
Bensallam, Saad
Shrinkage Curve: Experimental Study and Modelling [Volume 25, Issue 3, 2012, Pages 203-210]
-
Benzerga, D.
Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
-
Bera, Parthasarathi
Tuning of Excitation and TCSC -Based Stabilizers for Multimachine Power System [Volume 23, Issue 1, 2010, Pages 37-52]
-
Besanjideh, Mohsen
Nonlinear and Non-stationary Vibration Analysis for Mechanical Fault Detection by Using EMD-FFT Method [Volume 25, Issue 4, 2012, Pages 363-372]
-
Besmi, M.R.
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Bessonov, A. E.
Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
-
Beulah, D.
The Ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022, Pages 319-326]
-
Bezboruah, T.
Evaluating the Reliability of PwCOV: A Loosely Coupled Software as a Service for COVID-19 Data Processing System [Volume 33, Issue 12, 2020, Pages 2496-2502]
-
Bezboruah, Tulshi
Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server [Volume 33, Issue 1, 2020, Pages 75-81]
-
Bhadauria, Abhimanyu
Towards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer [Volume 29, Issue 4, 2016, Pages 554-562]
-
Bhandwal, M
Estimate the Performance of Catalytic Converter Using Turbulence Induce Devices [Volume 31, Issue 5, 2018, Pages 856-862]
-
Bhardwaj, Diwakar
Estimation of Network Reliability for a Fully Connected Network with Unreliable Nodes and Unreliable Edges using Neuro Optimization [Volume 22, Issue 4, 2009, Pages 317-332]
-
Bharti, D.
Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
-
Bhaskar, K
Effect of Abrasion Process on Reflectance Factor and Color Change of Chenille Woven Fabrics [Volume 27, Issue 8, 2014, Pages 1317-1324]
-
Bhaskara Rao, J.
Estimation of Roughness Parameters of A Surface Using Different Image Enhancement Techniques (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 652-658]
-
Bhat, G.
Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
-
Bhat, J. A.
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Bhat, R.
Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
-
Bhat, S. K.
Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
-
Bhat, S. K.
Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
-
Bhat, S. K.
Predictive Modelling and Optimization of Double Ring Electrode Based Cold Plasma Using Artificial Neural Network [Volume 37, Issue 1, 2024, Pages 83-93]
-
Bhat, Subraya Krishna
Physico-Mechanical Characterization of Recycled Waste Tire Rubber and Rice Straw Reinforced Composite [(Articles in Press)]
-
Bhatia, Satvinder Singh
Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
-
Bhatia, Upain
Constriction Scour In Pressurized Flow Condition (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 237-246]
-
Bhatnagar, Amit
A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
-
Bhatt, D. V.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Bhatt, G.
Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]
-
Bhavani, B. D.
Enhancing Seismic Design of Non-structural Components Implementing Artificial Intelligence Approach: Predicting Component Dynamic Amplification Factors [Volume 36, Issue 7, 2023, Pages 1211-1218]
-
Bhavi, I.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Bhavya, K.
Performance Evaluation of Weighted Feedback Based UPQC under Various Power Quality Issues [Volume 36, Issue 3, 2023, Pages 441-449]
-
Bhosale, A. P.
Comparative Environmental Impact Assessment of Battery Electric Vehicles and Conventional Vehicles: A Case Study of India [Volume 36, Issue 5, 2023, Pages 965-978]
-
Bhosale, S.
Hybrid Beamforming for Dual Functioning Multi-input Multi-output Radar using Dimension Reduced-baseband Piecewise Successive Approximation [Volume 36, Issue 1, 2023, Pages 182-190]
-
Bidekani Bakhtiarvand, D.
An Ensemble Click Model for Web Document Ranking [Volume 33, Issue 7, 2020, Pages 1208-1213]
-
Bigdeli, H.
The Equipment Scheduling and Assignment Problem in the Overhaul Industry [Volume 36, Issue 6, 2023, Pages 1150-1165]
-
Bigdeli, M.
Mitigation Transformer Inrush Current Using Modified Transient Current Limiter [Volume 32, Issue 5, 2019, Pages 701-709]
-
Bigdeli, M.
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Bigdeli, M.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Biglarahmadi, M.
A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
-
Biglari, M
Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron [Volume 31, Issue 8, 2018, Pages 1274-1282]
-
Biglari, M.
Feature Selection for Small Sample Sets with High Dimensional Data Using Heuristic Hybrid Approach [Volume 33, Issue 2, 2020, Pages 213-220]
-
Bilad, M. Roil
Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
-
Bilal Khan, M
Control of a Robotic Wheel-Chair Prototype for People with Walking Disabilities [Volume 31, Issue 5, 2018, Pages 693-698]
-
Bina, K.
Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process [Volume 31, Issue 6, 2018, Pages 877-885]
-
Binaei, R.
Novel Phase-frequency Detector based on Quantum-dot Cellular Automata Nanotechnology [Volume 33, Issue 2, 2020, Pages 269-276]
-
Bin Ibne Reaz, M.
Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
-
Binti Mohd Hanib, N.
Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
-
Bishnoi, Jaimala
Soret Dufour Driven Thermosolutal Instability of Darcy-maxwell Fluid [Volume 25, Issue 4, 2012, Pages 367-378]
-
Bismantolo, P
Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
-
Biswas, A.
Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms [Volume 30, Issue 10, 2017, Pages 1555-1564]
-
Biswas, R. R.
Evaluating Seismic Effects on a Water Supply Network and Quantifying Post-Earthquake Recovery [Volume 32, Issue 5, 2019, Pages 654-660]
-
Biswas, S.
Umpire’s Signal Recognition in Cricket Using an Attention based DC-GRU Network [Volume 37, Issue 4, 2024, Pages 662-674]
-
Biswas, Samit
Shot-ViT: Cricket Batting Shots Classification with Vision Transformer Network [(Articles in Press)]
-
Biswas, T. K.
Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
-
Bkhaitawi, A. H. Z.
Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
-
Blaabjerg, F.
Nonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System [Volume 33, Issue 2, 2020, Pages 237-247]
-
Blaabjerg, F.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Blinov, P.
Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor [Volume 33, Issue 7, 2020, Pages 1423-1430]
-
Blinov, P. A.
Developments Made in the Field of Drilling Fluids by Saint Petersburg Mining University [Volume 33, Issue 4, 2020, Pages 702-711]
-
Blinov, Pavel Aleksandrovich
Evaluation of strength properties of cement containing NaCl in mixing water for cementing wells in halite strata [(Articles in Press)]
-
B. Lourenço, P.
Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
-
B. Mashahir, Mohammad
Effect of Collars and Bars in Reducing the Local Scour Around Cylindrical Bridge Piers [Volume 22, Issue 4, 2009, Pages 333-342]
-
Bodaghi, M.
BUCKLING ANALYSIS OF FUNCTIONALLY GRADED MINDLIN PLATES SUBJECTED TO LINEARLY VARYING IN-PLANE LOADING USING POWER SERIES METHOD OF FROBENIUS [Volume 25, Issue 1, 2012, Pages 89-106]
-
Boghrati, M.
Various Approaches to Thermodynamic Optimization of a Hybrid Multi-effect Evaporation with Thermal Vapour Compression and Reverse Osmosis Desalination System Integrated to a Gas Turbine Power Plant [Volume 32, Issue 5, 2019, Pages 777-789]
-
Bohlooli, A.
Neural Network Based Protection of Software Defined Network Controller against Distributed Denial of Service Attacks [Volume 30, Issue 11, 2017, Pages 1714-1722]
-
Boiko, J. M.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Bokaei, M. H.
A Hybrid Approach to Detect Researchers’ Communities Based on Deep Learning and Game Theory [Volume 36, Issue 11, 2023, Pages 2052-2062]
-
Bolong, J.
Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
-
Bolouri Bazaz, J.
Reconstitution of Sand Specimens Using a Rainer System [Volume 30, Issue 10, 2017, Pages 1451-1463]
-
Bolouri Bazaz, J.
Behavior of Eccentrically Inclined Loaded Ring Footings Resting on Granular Soil [Volume 33, Issue 11, 2020, Pages 2146-2154]
-
Bolouri Bazaz, J.
Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam [Volume 37, Issue 5, 2024, Pages 1036-1049]
-
Bonakdari, Hossein
Predicting Shear Stress Distribution in Rectangular Channels Using Entropy Concept [Volume 28, Issue 3, 2015, Pages 360-367]
-
Bonakdari, Hossein
Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
-
Bonakdari, Hossein
Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
-
Bonakdari, Hossein
Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
-
Bonakdari, Hossein
Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
-
Bonakdari, Hossein
Flow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend [Volume 29, Issue 1, 2016, Pages 14-22]
-
Bonakdari, Hossein
Comparison of Three Soft Computing Methods in Estimating Apparent Shear Stress in Compound Channels [Volume 29, Issue 9, 2016, Pages 1219-1226]
-
Bonakdari, Hossein
A Comparative Study of Extreme Learning Machines and Support Vector Machines in Prediction of Sediment Transport in Open Channels [Volume 29, Issue 11, 2016, Pages 1499-1506]
-
Bonakdarpour, B.
The Study of Organic Removal Efficiency and Membrane Fouling in a Submerged Membrane Bioreactor Treating Vegetable Oil Wastewater [Volume 29, Issue 12, 2016, Pages 1642-1649]
-
Bonora, N
A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
-
Boodaghi, H.
Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
-
Boostan, A.
Seismic Response of 4-Legged Self-Supporting Telecommunication Towers [Volume 20, Issue 2, 2007, Pages 107-126]
-
Bora, A.
Evaluating the Reliability of PwCOV: A Loosely Coupled Software as a Service for COVID-19 Data Processing System [Volume 33, Issue 12, 2020, Pages 2496-2502]
-
Bora, Abhijit
Investigation on Reliability Estimation of Loosely Coupled Software as a Service Execution Using Clustered and Non-Clustered Web Server [Volume 33, Issue 1, 2020, Pages 75-81]
-
Bora, C.
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Borghei, S. M.
Effect of Polyethylene Glycol and Triton X-100 on the Enzymatic Treatment of Bisphenol A [Volume 31, Issue 11, 2018, Pages 1816-1823]
-
Borhani, E.
Effect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy [Volume 31, Issue 12, 2018, Pages 2092-2101]
-
Borhani, Gholam hossein
Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
-
Borji, Sadegh
A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
-
Borjini, M. N.
Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
-
Borjini, Naceur
Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
-
Borjini, Naceur
Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
-
Borna, Keivan
An Adaptive Hierarchical Method Based on Wavelet and Adaptive Filtering for MRI Denoising [Volume 29, Issue 1, 2016, Pages 31-39]
-
Boroumandnia, Arezou
Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1133-1138]
-
Borthwick, A. G. L.
Quadtree and Octree Grid Generation [Volume 9, Issue 1, 1996, Pages 9-18]
-
Borzouyi Kutenayi, S.
The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
-
Bosaghzadeh, A.
A Sample Dependent Decision Fusion Algorithm for Graph-based Semi-supervised Learning [Volume 33, Issue 5, 2020, Pages 1010-1019]
-
Botyan, Evgeny
The evaluation of complicated mining exploitation conditions influence on service life of open pit trucks suspensions with remote monitoring systems [(Articles in Press)]
-
Bouabdallah, said
Effect of Magnetic Field on the Rotating Flow in a Similar Czochralski Configuration [Volume 29, Issue 4, 2016, Pages 563-571]
-
Boualem, N.
Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
-
Bouaraour, K.
Numerical Study of Twin Jets Interactions using Realizable Model [Volume 35, Issue 3, 2022, Pages 544-551]
-
Bouchafaa, H.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Bouguebrine, C.
Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
-
Boukharouba, T.
Metallurgical and Mechanical Behavior of AISI 316- AISI 304 during Friction Welding Process [Volume 32, Issue 2, 2019, Pages 306-312]
-
Boukharouba, T.
Experimental Investigation of Friction Pressure Influence on the Characterizations of Friction Welding Joint for AISI 316 [Volume 33, Issue 12, 2020, Pages 2514-2520]
-
Boukharouba, T.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Bourjandi, M.
Fuzzy Centralized Coordinate Learning and Hybrid Loss for Human Activity Recognition [Volume 35, Issue 1, 2022, Pages 130-141]
-
Bousbaine, Amar
Optimizing DC Microgrid Systems for Efficient Electric Vehicle Battery Charging in Ain El Ibel, Algeria [(Articles in Press)]
-
Boushra, A.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Boussaada, M
Emulation, Model Identification and New-approach Characterization of a PV Panel (TECHNICAL NOTE) [Volume 31, Issue 8, 2018, Pages 1222-1227]
-
Bousshine, L.
A New Model of Equivalent Modulus Derived from Repeated Load CBR Test [Volume 33, Issue 7, 2020, Pages 1321-1330]
-
Boutabba, T
A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
-
Boyer, O.
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Boyer, Omid
Designing a Model for Optimizing the Operation of Production Processes in Industry 4.0 [(Articles in Press)]
-
Bozarjomehri, R. B.
A New Vapor Pressure Equation [Volume 3, Issue 3, 1990, Pages 98-103]
-
Bozorgi, A.
A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
-
Bozorgi-Amiri, A
A Procurement-distribution Coordination Model in Humanitarian Supply Chain Using the Information-sharing Mechanism [Volume 31, Issue 7, 2018, Pages 1057-1065]
-
Bozorgi-Amiri, A.
Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
-
Bozorgi-Amiri, A.
A Multi-attribute Reverse Auction Framework Under Uncertainty to the Procurement of Relief Items [Volume 31, Issue 12, 2018, Pages 2068-2076]
-
Bozorgi-Amiri, A.
Evaluation and Ranking of Sustainable Third-party Logistics Providers using the D-Analytic Hierarchy Process [Volume 33, Issue 11, 2020, Pages 2233-2244]
-
Bozorgi-Amiri, A.
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Bozorgi-Amiri, A.
A Multi-objective Cash-in-transit Pollution-location-routing Problem Based on Urban Traffic Conditions [Volume 36, Issue 2, 2023, Pages 299-310]
-
Bozorgmehr, M.
The Effect of Nickel Increasing and Aluminum Addition on Sulfidation Resistance of Fe-Ni-Cr Alloys (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 161-168]
-
Bradford, M. A.
Elastic Initial and Post-local Buckling of Profiled through Girders [Volume 12, Issue 1, 1999, Pages 1-12]
-
Brahimi, M.
Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
-
Brahmbhatt, B.
Modified Second Order Generalized Integrator-frequency Locked Loop Grid Synchronization for Single Phase Grid tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022, Pages 283-290]
-
Breau, C.
Stress Analysis of the Human Ligamentous Lumber Spine-From Computer-Assisted Tomography to Finite Element Analysis [Volume 8, Issue 2, 1995, Pages 107-112]
-
Breesem, K. M.
Enhancement of the Shear-flexural Strength of the Rubberized Concrete Prism Beam by External Reinforcement [Volume 35, Issue 5, 2022, Pages 1017-1023]
-
Broghany, M.
Optimum Design of Multi-layered Micro-perforated Panel Sound Absorbers in Combination with Porous Materials in an Arbitrary Frequency Range [Volume 35, Issue 5, 2022, Pages 996-1005]
-
Broumandnia, A.
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Brusly Solomon, A.
Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage [Volume 31, Issue 6, 2018, Pages 980-985]
-
B. Speily, O. R.
Energy Aware Resource Management of Cloud Data Centers [Volume 30, Issue 11, 2017, Pages 1730-1739]
-
Bu, Yuhuan
The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
-
Buabthong, P.
Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]
-
Buddhawar, G.
Enhancing Book and Document Digitization from Videos: A Feature Fusion-Based Approach [Volume 37, Issue 3, 2024, Pages 538-545]
-
Buddhawar, Gaurav
Predictive Analysis for Optimal Text Visibility: A Comprehensive Study on Frame-of-Interest Prediction in Book Digitization Videos [(Articles in Press)]
-
Budi, L. S.
Physical and Magnetic Properties Comparison of Cobalt Ferrite Nanopowder Using Sol-gel and Sonochemical Methods [Volume 33, Issue 5, 2020, Pages 877-884]
-
Budiarto, U.
Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
-
Budihardjo, M. A.
Equilibrium of Ammonia (NH3) and Ammonium (NH4+) during Microalgae Harvesting using Electrocoagulation [Volume 36, Issue 3, 2023, Pages 565-572]
-
Budi Prasetyo, A.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Budiyantoro, C.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Budiyono, Budiyono
Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]
-
Bui Minh, D.
Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
-
Burgos, L. M.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Burrows, R.
Head-Driven Simulation of Water Supply Networks [Volume 15, Issue 1, 2002, Pages 11-22]
-
Buslaev, G.
Augmented Reality System and Maintenance of Oil Pumps [Volume 33, Issue 8, 2020, Pages 1620-1628]
-
Buslaev, George
Development of a hydraulic circulation sub as a tool to prevent mud losses during well drilling [(Articles in Press)]
-
Buslaev, G. V.
Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
-
Butool, Shehla
An Improved Structure and Analysis of Asymmetrical Spacer Nanowire Tunnel Field Effect Transistor [(Articles in Press)]
-
Buttol, S.
Design and Analysis of Symmetrical Dual Gate Tunnel Field Effect Transistor with Gate Dielectric Materials in 10nm Technology [Volume 37, Issue 4, 2024, Pages 588-595]
-
Buttol, S.
Design and Performance Analysis of Gate Overlap Dual Material Tunnel Field Effect Transistor [Volume 37, Issue 9, 2024, Pages 1773-1779]
-
B. Wani, S.
Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
-
Bypour, H.
An Efficient Secret Sharing-based Storage System for Cloud-based Internet of Things [Volume 32, Issue 8, 2019, Pages 1117-1125]
C
-
C, Angel
Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
-
Cahyono, H.
Partial Enzymatic Hydrolysis of Glucomannan and Its Mathematical Model [Volume 36, Issue 12, 2023, Pages 2214-2221]
-
Cano-europa, E.
Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
-
Cano-Europa, E.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Cao, Vui Van
Distributions of stress and strain in concrete filled steel tube beams [(Articles in Press)]
-
Cao, Z. C.
Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
-
Caronge, M. A.
Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
-
Caronge, M. A.
Basic Engineering Properties of Concrete with Refractory Brick as Coarse Aggregate: Compressive Stress-Time Relationship Assessment [Volume 37, Issue 5, 2024, Pages 931-940]
-
Cehn, Y. W.
The Kinetics of Methanation on Nickel Catalysts [Volume 1, Issue 1, 1988, Pages 7-18]
-
Chaboki, A.
Inelastic Continuum Modeling of Carbon Nanotube,s Behavior Using Finite Element Method [Volume 20, Issue 2, 2007, Pages 129-135]
-
Chaboki Khiabani, A.
Stress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 227-234]
-
Chadaga, R.
Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
-
CHAFI, Anas
Suppliers Selection in Consideration of Risks by a Neural Network [Volume 32, Issue 10, 2019, Pages 1454-1463]
-
Chaki, S.
Applications of Modified Simple Additive Weighting Method in Manufacturing Environment [Volume 35, Issue 4, 2022, Pages 830-836]
-
Chakrabarty, R.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Chala, Abdelouahed
Effect of Gas Mixture H2-N2 on Microstructure and Microhardness of Steel 32CDV13 Nitrided by Plasma [Volume 27, Issue 4, 2014, Pages 621-624]
-
Chalkosh Amiri, M.
Separation of Ultra - Fine Sulphur Particles from Nta Dispersion by Aphron Flotation [Volume 3, Issue 3, 1990, Pages 148-153]
-
Chalkosh Amiri, M.
Modified Kremser Equation for Plate Type Gas Absorberin Non-Isothermal Operation (RESEARCH NOTE). [Volume 5, Issue 3, 1992, Pages 137-138]
-
Challagulla, S. P.
Seismic Response of Building Structures with Sliding Non-structural Elements [Volume 33, Issue 2, 2020, Pages 205-212]
-
Challagulla, S. P.
Enhancing Seismic Design of Non-structural Components Implementing Artificial Intelligence Approach: Predicting Component Dynamic Amplification Factors [Volume 36, Issue 7, 2023, Pages 1211-1218]
-
Chamani, M.
Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers [Volume 32, Issue 1, 2019, Pages 112-120]
-
Chamkha, A. J.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Chan, H.Y.
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Chandarana, N.
Experimental Investigation on Hard Rock Strata for the purpose of Ground Water Improvement with the inclusion of Bore Blasting Technique [Volume 37, Issue 9, 2024, Pages 1707-1715]
-
Chandiwala, A.
Experimental Study of Lateral Loading on Piled Raft Foundations on Sandy Soil [Volume 36, Issue 1, 2023, Pages 28-34]
-
Chandna, Ritu
Reliability Measures Measurement under Rule-Based Fuzzy Logic Technique [Volume 28, Issue 10, 2015, Pages 1486-1492]
-
Chandra, S.
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Chandra Kala, K
An Efficient Hierarchical Modulation based Orthogonal Frequency Division Multiplexing Transmission Scheme for Digital Video Broadcasting [Volume 31, Issue 4, 2018, Pages 574-579]
-
Chandra Mandal, A.
A Studyof the Design of Horizontal Axis Wind Turbine [Volume 6, Issue 2, 1993, Pages 117-124]
-
Chandramohan, S.
Design and Evaluation of a Magnetorheological Damper Based Prosthetic Knee [Volume 32, Issue 1, 2019, Pages 146-152]
-
Chandramohan, Sujatha
Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
-
Chandran, R. J.
An Adaptively-damped Compressible-liquid Model for Non-cavitating Hydraulic Surges [Volume 33, Issue 10, 2020, Pages 2047-2056]
-
Chandrashekar, M.
Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy [Volume 31, Issue 6, 2018, Pages 943-948]
-
Chandrikab, J.
Evolutionary Computing Assisted Wireless Sensor Network Mining for QoS-Centric and Energy-efficient Routing Protocol [Volume 33, Issue 5, 2020, Pages 791-797]
-
Chandwani, H.
Modified Second Order Generalized Integrator-frequency Locked Loop Grid Synchronization for Single Phase Grid tied System Tuning and Experimentation Assessment [Volume 35, Issue 2, 2022, Pages 283-290]
-
Changbin, D.
Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 4, 2020, Pages 676-685]
-
Changbin, D.
Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 7, 2020, Pages 1364-1374]
-
Changsheng, Z.
Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
-
Chapokpour, jafar
Estimation of Friction Coefficient in Sediment Contained Flow through Rockfill [Volume 26, Issue 2, 2013, Pages 187-196]
-
Charmin, A.
Channel Estimation and Carrier Frequency Offset Compensation in Orthogonal Frequency Division Multiplexing System Using Adaptive Filters in Wavelet Transform Domain [Volume 33, Issue 7, 2020, Pages 1231-1239]
-
Charoqdouz, E.
Feature Extraction from Several Angular Faces Using a Deep Learning Based Fusion Technique for Face Recognition [Volume 36, Issue 8, 2023, Pages 1548-1555]
-
Chattopadhyay, C.
Enhancing Book and Document Digitization from Videos: A Feature Fusion-Based Approach [Volume 37, Issue 3, 2024, Pages 538-545]
-
Chattopadhyay, Chiranjoy
Predictive Analysis for Optimal Text Visibility: A Comprehensive Study on Frame-of-Interest Prediction in Book Digitization Videos [(Articles in Press)]
-
Chaturvedi, D. K.
Studies with a Generalized Neuron Based PSS on a Multi-Machine Power System [Volume 17, Issue 2, 2004, Pages 131-140]
-
Chaturvedi, P.
A Fault Tolerant Operation of 3-Phase, 5-Level CHBMLI under Open Circuit Fault Conditions [Volume 36, Issue 10, 2023, Pages 1733-1745]
-
Chau, K. W.
Experimental Modeling and Evaluation Sediment Scouring in Riverbeds around Downstream in Flip Buckets [Volume 33, Issue 10, 2020, Pages 1904-1916]
-
Chauahn, Deepa
Working Vacation Queue with Second Optional Service and Unreliable Server [Volume 25, Issue 3, 2012, Pages 223-230]
-
Chaube, S
Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]
-
Chaudhari, A. D.
Development and Calibration of an Efficiency Factor Model for Recycled Aggregate Concrete Struts [Volume 36, Issue 8, 2023, Pages 1449-1458]
-
Chaudhari, M.
Improved Performance Analysis of Single-phase Line Start Synchronous Reluctance Motor Derived from Induction Motor [Volume 35, Issue 8, 2022, Pages 1641-1650]
-
Chaudhari, M. A.
A Fault Tolerant Operation of 3-Phase, 5-Level CHBMLI under Open Circuit Fault Conditions [Volume 36, Issue 10, 2023, Pages 1733-1745]
-
Chaudhari, P. R.
Enhanced Face Presentation Attack Prevention Employing Feature Fusion of Pre-trained Deep Convolutional Neural Network Model and Thepade's Sorted Block Truncation Coding [Volume 36, Issue 4, 2023, Pages 807-816]
-
Chauhan, A.
Investigation and Optimization of Tribological Aspects of Babbitt-Ilmenite Composite using Weighted Grey Relation Analysis [Volume 36, Issue 5, 2023, Pages 894-903]
-
ChayaDevi, S. K.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Cheerala, S.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Chehardoli, H.
Third-order Decentralized Safe Consensus Protocol for Inter-connected Heterogeneous Vehicular Platoons [Volume 31, Issue 6, 2018, Pages 967-972]
-
Cheldavi, A.
Capacitive Flux Compression Generator (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 337-348]
-
Cheldavi, A.
Spice Compatible Model for Multiple Coupled Nonuniform Transmission Lines Application in Transient Analysis of VLSI Circuits [Volume 17, Issue 2, 2004, Pages 119-130]
-
Cheldavi, A.
Comparison of Exact Analysis and Steplines Approximation for Externally Excited Exponential Transmission Line [Volume 18, Issue 1, 2005, Pages 11-20]
-
Chelongar, A.
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Chen, G.
Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
-
Chen, J.
Design and Parameters Optimization of Pteris vittata Automatic Sowing Machine for Phytoremediation [Volume 33, Issue 4, 2020, Pages 694-701]
-
Chen, Jian
Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
-
Chen, Jie
Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
-
Chen, Zhijun
Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]
-
Chen, Z. Y.
Numerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection [Volume 33, Issue 7, 2020, Pages 1403-1412]
-
Cheng, T.
Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
-
Cheng, T.
Multi-factorial Analysis on Vault Stability of an Unsymmetrically Loaded Tunnel Using Response Surface Method [Volume 32, Issue 11, 2019, Pages 1570-1576]
-
Cheraghalipour, A.
An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
-
Cheraghi, A.
Thermodynamic Modeling the Solubility of CO2 in Aqua System of Methyldiethanolamine and 2-(2-Aminoethylamino)ethanol Using the Nonelectrolyte Wilson Nonrandom Factor [Volume 33, Issue 12, 2020, Pages 2436-2442]
-
Cheraghi, F.
Investigating the Effect of Ultrasound Intensity on the Magnetic Properties of Magnetite Nanostructures Synthesized by Sonochemical Method [Volume 36, Issue 6, 2023, Pages 1034-1039]
-
Cheraghi Kootiani, Reza
Investigation of a Powerful Tool for the Development of Thinly Bedded Carbonate Reservoirs (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1936-1943]
-
Chernoyarov, O. V.
Digital Binary Phase-shift Keyed Signal Detector [Volume 32, Issue 4, 2019, Pages 510-518]
-
Chernoyarov, O. V.
Secrecy of Communications in Data Transmission by Impulses with Unknown Moments of Appearance and Disappearance [Volume 32, Issue 4, 2019, Pages 548-554]
-
Chernoyarov, O. V.
The Object Detection Efficiency in Synthetic Aperture Radar Systems [Volume 33, Issue 2, 2020, Pages 337-343]
-
Chernoyarov, O. V.
Digital Root-mean-square Signal Meter [Volume 33, Issue 11, 2020, Pages 2201-2208]
-
Chhajed, G.
Novel Scheme for Data Hiding in Binary Images using Cover Pattern Histogram [Volume 36, Issue 11, 2023, Pages 2124-2136]
-
Chikouche Hamina, M.
Effects of Pozzolanic Admixture (Waste Bricks) on Mechanical Response of Mortar [Volume 21, Issue 1, 2008, Pages 1-8]
-
Chiluka, S.
Performance Assessment of Ductile Detailing Code-Based Reinforced Concrete Special Moment Resisting Frames [Volume 36, Issue 3, 2023, Pages 457-464]
-
Chin, C. Seong
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Chin, N. L
Comparative Studies on Ultrasound Pre-treated Peanut Husk Powder and Ultrasound Simultaneous Process on Heavy Metal Adsorption [Volume 31, Issue 8, 2018, Pages 1334-1340]
-
Chinforoush, N.
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
CHINTALA, MAHESWARA RAO
Tuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive [Volume 29, Issue 11, 2016, Pages 1565-1573]
-
Chitizadeh, J.
Performance Improvement of Expanded Integrated Local Area Networks (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 141-146]
-
Chitsaz, A.
Thermodynamic Investigation and Optimization of a Power Generation System Based Solid Oxide Fuel Cell Using Taguchi Approach [Volume 32, Issue 7, 2019, Pages 1040-1048]
-
Chitsaz, A.
Modeling and Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with an Oxygenated Fuel by Using an Exergoeconomic Methodology for Power, Heating and Cooling Production [Volume 33, Issue 3, 2020, Pages 477-485]
-
Chokan, F.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Cholker, Arvind
Strain and Damage Sensing Property of Self-compacting Concrete Reinforced with Carbon Fibers [Volume 32, Issue 11, 2019, Pages 1577-1583]
-
Chong, W. C
Improving Hydrophilicity of Polyethersulfone Membrane Using Silver Nanoparticles for Humic Substances Removal [Volume 31, Issue 8, 2018, Pages 1364-1372]
-
Choong, F.
Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
-
Choudhari, C. S
Testing of Environment Friendly Refrigerant R290 for Water Cooler Application (RESEARCH NOTE) [Volume 31, Issue 1, 2018, Pages 157-163]
-
Choudhary, Preeti
Fuzzy Reliability Evaluation of a Repairable System with Imperfect Coverage, Reboot and Common-cause Shock Failure [Volume 25, Issue 3, 2012, Pages 231-238]
-
Choudhary, Preeti
Performance Analysis of a Repairable Robot Safety System with Standby, Imperfect Coverage and Reboot Delay [Volume 26, Issue 9, 2013, Pages 1077-1088]
-
Choudhury, S.
Comparative Performance Study of Tuned Liquid Column Ball Damper for Excessive Liquid Displacement on Response Reduction of Structure [Volume 33, Issue 5, 2020, Pages 753-759]
-
Choudhury, S.
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Choudhury, S.
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Choudhury, Satyabrata
Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1388-1394]
-
Choug, N.
Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator [Volume 33, Issue 4, 2020, Pages 567-574]
-
Chouksey, S. K.
Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
-
Choupani, M. A.
Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
-
Choupani, Naghdali
A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite [Volume 27, Issue 6, 2014, Pages 991-1004]
-
Chowdhury, A.
Improved Performance Analysis of Single-phase Line Start Synchronous Reluctance Motor Derived from Induction Motor [Volume 35, Issue 8, 2022, Pages 1641-1650]
-
Chowdhury, A.
Performance Analysis of Bi-directional Improved Hybrid Three Quasi Z source Converter [Volume 36, Issue 7, 2023, Pages 1250-1258]
-
Chrifi-Alaoui, L
A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
-
Chrismianto, Deddy
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Christensen, B. A.
Optimum Design of Interbasin Pipe System (RESEARCH NOTES) [Volume 8, Issue 1, 1995, Pages 49-54]
-
Chuan Ching, Dennis Ling
Effect of Novel Swirl Distributor Plate on Hydrodynamics of Fluidized Bed Gasifier [Volume 32, Issue 10, 2019, Pages 1358-1365]
-
Chudasama, M.
An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
-
Chudasama, M. K.
Experimental Formability Study of Ti6Al4V Sheet Metal using Friction Stir Heat Assisted Single Point Incremental Forming Process [Volume 35, Issue 3, 2022, Pages 560-566]
-
Chugunov, Vladimir
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Chupong, P.
Computational Framework Development to Investigate Al Matrix with Low-Velocity Impact Behavior at Varied Temperatures for Cold Spray Composite Coating Design: Al/TiN Case [Volume 37, Issue 4, 2024, Pages 804-817]
-
Clausen, E. C.
Bioreactor Scale-up for Water-Gas Shift Reaction [Volume 9, Issue 3, 1996, Pages 121-129]
-
Collier, Michael
An Intelligent Computer Interface Utilizing Parallel Picocontrollers (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 367-370]
-
Collier, Michael
The Opportunities Afforded by Embedded Computer Systems for Monitoring and Control of Industrial Processes in Less-Industrialised Countries (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 379-384]
-
Contreras, A.
Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
-
Cooper, V.
Kinesiological Description of Hippotherapy as a Treatment Modality [Volume 33, Issue 11, 2020, Pages 2347-2355]
-
Cory, B. J.
Real Time Dynamic Simulation of Power System Using Multiple Microcomputers [Volume 3, Issue 1, 1990, Pages 15-22]
-
Cui, X.
Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks [Volume 33, Issue 11, 2020, Pages 2416-2424]
-
Cung, L.
An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
-
C.V, Subramanian
Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]
D
-
D, Prakash
Multi Objective Optimization on Insulated Residential Roof with Solar Water Heating System Using Grey Relation Analysis (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1620-1627]
-
D'Souza, J. M.
Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
-
Dabaghi, E.
Feature Dimension Reduction of Multisensor Data Fusion using Principal Component Fuzzy Analysis [Volume 30, Issue 4, 2017, Pages 493-499]
-
Dabbagh, R.
A Multi-attribute Reverse Auction Framework Under Uncertainty to the Procurement of Relief Items [Volume 31, Issue 12, 2018, Pages 2068-2076]
-
Dabestani, S.
Optimal Capacity and Location for Renewable-based Microgrids Considering Economic Planning in Distribution Networks [Volume 36, Issue 12, 2023, Pages 2175-2183]
-
Dabirian, F.
Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
-
Dabiry, Yosef
An Experimental Study on the Tensile Behaviors of Ultrasonic Welded T-joints for Polyamide Composite [Volume 29, Issue 12, 2016, Pages 1783-1790]
-
Dadashi Haji, M.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Dadashpour, I.
Evaluation and Ranking of Sustainable Third-party Logistics Providers using the D-Analytic Hierarchy Process [Volume 33, Issue 11, 2020, Pages 2233-2244]
-
Dadban Shahamat, Y.
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
-
Dadgar, A.
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Dadras, Mahmoud Reza
A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
-
D. Afifi, M.
Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field [Volume 36, Issue 11, 2023, Pages 2087-2101]
-
Daghbandan, Allahyar
Multi-period and Multi-objective Stock Selection Optimization Model Based on Fuzzy Interval Approach [Volume 32, Issue 9, 2019, Pages 1306-1311]
-
Daghighi, S.
Optimum Design of a Coir Fiber Biocomposite Tube Reinforced with Nano Silica and Nano Clay Powder [Volume 30, Issue 12, 2017, Pages 1894-1902]
-
Dahlan, Irvan
Citronellyl Butyrate Synthesis in Non-Conventional Media Using Packed-Bed Immobilized Candida Rugosa Lipase Reactor [Volume 18, Issue 2, 2005, Pages 153-164]
-
Dahodwala, M
Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation [Volume 31, Issue 7, 2018, Pages 1082-1087]
-
Dakshina Murthy, N. R.
Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers [Volume 33, Issue 8, 2020, Pages 1465-1471]
-
Daliri, Hamid
A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
-
Damghani, M.
An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
-
Damiri- Ganji, Davood
Analytic Approach to Investigation of Fluctuation and Frequency of the Oscillators with Odd and Even Nonlinearities [Volume 23, Issue 1, 2010, Pages 41-56]
-
Damiri- Ganji, Davood
Analytical Solution of The Laminar Boundary Layer Flow over Semi-Infinite Flat Plate: Variable Surface Temperature [Volume 23, Issue 3, 2010, Pages 215-222]
-
Damiri- Ganji, Davood
Analytical Investigation of Jeffery-hamel Fow with High Magnetic Field and Nano Particle by RVIM [Volume 25, Issue 3, 2012, Pages 249-256]
-
Damiri- Ganji, Davood
Nanofluid Flow in a Semi-porous Channel in the Presence of Uniform Magnetic Field [Volume 26, Issue 6, 2013, Pages 653-662]
-
Damodariya, S. M.
Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]
-
Danaei, M. M.
A New Algorithm for Optimum Voltage and Reactive Power Control for Minimizing Transmission Lines Losses [Volume 14, Issue 2, 2001, Pages 91-98]
-
Danaei, M. M.
Capacitive Flux Compression Generator (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 337-348]
-
Danesh, N.
Investigation of the Damping Performance of a Shape Memory Alloy Beam [Volume 36, Issue 7, 2023, Pages 1369-1382]
-
Danesh, N.
A New Optimization Algorithm Based on Particle Swarm Optimization Genetic Algorithm and Sliding Surfaces [Volume 37, Issue 9, 2024, Pages 1716-1735]
-
Danesh Alagheh Band, T. S.
A Post-disaster Assessment Routing Multi-objective Problem under Uncertain Parameters [Volume 33, Issue 12, 2020, Pages 2503-2508]
-
Daneshfar, E.
Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
-
Daneshfar, Leila
An Inventory Model for Deteriorating Items Using Vendor-Managed Inventory Policy [Volume 27, Issue 7, 2014, Pages 1081-1090]
-
Daneshmand-Mehr, Maryam
Developing a Data Envelopment Analysis Model for a Smart Sustainable Multi-Echelon Supply Chain Using Natural, Managerial, and Free Disposal Hulls: An Approach using Bootstrap Simulation [(Articles in Press)]
-
DaneshmandPour, Navid
Real Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology [Volume 26, Issue 11, 2013, Pages 1347-1356]
-
Danesh-Manesh, H.
Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
-
Danesh Narooei, K.
Optimal Selection of Cutting Parameters for Surface Roughness in Milling Machining of AA6061-T6 [Volume 35, Issue 6, 2022, Pages 1170-1177]
-
Danesh Narooei, K.
Investigating the Effect of Considering Different Cross Section Design in Friction Stir Welded Joint Line of Dissimilar Aluminum Alloys [Volume 36, Issue 1, 2023, Pages 19-27]
-
Daneshvar, Amir
Applying fuzzy UTASTAR for sustainable supplier selection in Iran's construction industry [(Articles in Press)]
-
Dang Quoc, V.
Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
-
Daniali, S.
Reinforced Concrete Columns in Torsion (RESEARCH NOTE). [Volume 6, Issue 4, 1993, Pages 179-185]
-
Daniel, C
Seismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE) [Volume 32, Issue 11, 2019, Pages 1543-1547]
-
Daniel, C.
Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
-
Dankoub, A.
Performance of High-strength Concrete Made with Recycled Ceramic Aggregates (Research Note) [Volume 33, Issue 6, 2020, Pages 1085-1093]
-
Dapeng, X.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Darabi, A.
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Darabi, A.
Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
-
Daraee, Atefe
Analysis of Pre-processing and Post-processing Methods and Using Data Mining to Diagnose Heart Diseases [Volume 29, Issue 7, 2016, Pages 921-930]
-
Dardel, Morteza
Large Deflection Analysis of Compliant Beams of Variable Thickness and Non-Homogenous Material under Combined Load and Multiple Boundary Conditions [Volume 25, Issue 4, 2012, Pages 353-362]
-
Dardel, Morteza
Crack Detection of Timoshenko Beams Using Vibration Behavior and Neural Network [Volume 26, Issue 12, 2013, Pages 1433-1444]
-
Dardel, Morteza
Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
-
Dardel, Morteza
Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint [Volume 28, Issue 2, 2015, Pages 243-250]
-
Dardel, Morteza
A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
-
Darezereshki, E.
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Dargush, G. F.
Fundamental Solutions of Dynamic Poroelasticity and Generalized Termoelasticity [Volume 5, Issue 1, 1992, Pages 1-10]
-
Dariabeigi, Ehasan
An Optimal Selection of Induction Heating Capacitance by Genetic Algorithm Considering Dissipation Loss Caused by ESR (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 19-26]
-
Dariane, Aalireza
Reservoir Operation During Droughts [Volume 16, Issue 3, 2003, Pages 209-216]
-
Darminto, D.
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
-
Darminto, D.
Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
-
Darminto, D.
Structural, Optical and Defect State Analyses of ZnO Nanoparticle Films [Volume 33, Issue 5, 2020, Pages 852-860]
-
Darvishalipour, F.
Fabrication of Nanoporous Functionalized Hydroxyapatite as High Performance Adsorbent for Acid Blue 25 Dye Removal [Volume 32, Issue 2, 2019, Pages 193-200]
-
Darvishan, Ehsan
Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock [Volume 32, Issue 11, 2019, Pages 1591-1609]
-
Darvishi, Ali
A Geometric View of Similarity Measures in Data Mining [Volume 28, Issue 12, 2015, Pages 1728-1737]
-
Darvishi, D.
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
-
Darvishi, D.
Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
-
Darvishvand, H. R.
Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
-
Darvishvand, H. R.
An Economic Approach to the Confinement of Different Concrete Classes with Carbon and Glass Fibers Reinforced Polymers [Volume 36, Issue 4, 2023, Pages 776-787]
-
Darvishvand, H.R.
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Darvizeh, A.
Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
-
Darvizeh, A.
Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method [Volume 26, Issue 4, 2013, Pages 341-350]
-
Daryadel, M
Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
-
Daryadel, M.
Study on Equal Channel Angular Pressing Process of AA7075 with Copper Casing by Finite Element-response Surface Couple Method [Volume 33, Issue 12, 2020, Pages 2538-2548]
-
Daryadel, Mahsa
Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
-
DAS, DEBAPRIYA
A Multi-Objective Method for Network Reconfiguration (TECHNICAL NOTE) [Volume 22, Issue 4, 2009, Pages 333-350]
-
DAS, DEBAPRIYA
Tuning of Excitation and TCSC -Based Stabilizers for Multimachine Power System [Volume 23, Issue 1, 2010, Pages 37-52]
-
Dashti, Hamide
Comparative Investigation of Half-mode SIW Cavity and Microstrip Hybrid Antenna Using Different Patch Shapes [Volume 27, Issue 10, 2014, Pages 1573-1580]
-
Dashti, Hamide
Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays [Volume 28, Issue 5, 2015, Pages 686-692]
-
Dastagiri, M.
Pongamia pinnata Plant Seed Oil as Dielectric Fluid for Electro Discharge Machining Process [Volume 32, Issue 12, 2019, Pages 1805-1812]
-
Dastgiri, A.
Design and Analysis of a Power Quality Improvement System for Photovoltaic Generation Based on LCL-Type Grid Connected Inverter [Volume 37, Issue 2, 2024, Pages 252-267]
-
Dastjerdi, Shahriar
Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
-
Dastjerdi, Shahriar
A Non-linear Static Equivalent Model for Multi-layer Annular/Circular Graphene Sheet Based on Non-local Elasticity Theory Considering Third Order Shear Deformation Theory in Thermal Environment [Volume 28, Issue 10, 2015, Pages 1533-1542]
-
Daud, M. H. A
D2EHPA-Sulfuric Acid System for Simultaneous Extraction and Recovery of Nickel Ions via Supported Liquid Membrane Process [Volume 31, Issue 8, 2018, Pages 1373-1380]
-
Daud, Z.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Davami, P
Computer Simulation of Equidxed Eutectic Solidifiction of Metals [Volume 12, Issue 4, 1999, Pages 247-258]
-
Davani Motlagh, A.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Davari, Ali
Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
-
Davari, A. R.
A Semi-empirical Model to Predict the Attached Axisymmetric Shock Shape [Volume 33, Issue 8, 2020, Pages 1643-1651]
-
Davari, Pooya
A Robust Feedforward Active Noise Control System with a Variable Step-Size FxLMS Algorithm: Designing a New Online Secondary Path Modelling Method [Volume 21, Issue 3, 2008, Pages 231-242]
-
Davari, Pooya
An Optimized Online Secondary Path Modeling Method for Single-Channel Feedback ANC Systems [Volume 22, Issue 1, 2009, Pages 1-12]
-
Davari, S.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Davarnejad, R.
Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
-
Davarnejad, R.
Dye Adsorption on the Blends of Saffron Petals Powder with Activated Carbon: Response Surface Methodology [Volume 31, Issue 12, 2018, Pages 2001-2008]
-
Davarnejad, R.
Prediction of Solubility of β-Carotene as a Component in a Multicomponent System in High-Pressure Carbon Dioxide [Volume 32, Issue 2, 2019, Pages 201-206]
-
Davarnejad, R.
Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
-
Davarnejad, R.
Simulation of Deposition Detection inside Wellbore by Photon Backscatter Radiography [Volume 33, Issue 12, 2020, Pages 2450-2454]
-
Davarnejad, R.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Davarnejad, R.
Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
-
Davarnejad, R.
Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
-
Davarnejad, reza
Supercritical Fluid Extraction of Carotenoid from Microalgae with Projected Thermodynamic Models (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 117-126]
-
Davarnejad, reza
Simulation of Convective Heat Transfer of a Nanofluid in a Circular Cross-section [Volume 26, Issue 6, 2013, Pages 571-576]
-
Davarnejad, reza
Modeling of TiO2-water Nanofluid Effect on Heat Transfer and Pressure Drop [Volume 27, Issue 2, 2014, Pages 195-202]
-
Davarnejad, reza
Prediction of Gas Hydrate Formation using HYSYS Software (TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1325-1330]
-
Davarnejad, reza
Numerical Comparison of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid within Helically Corrugated Tubes and Plain Tube [Volume 28, Issue 10, 2015, Pages 1408-1414]
-
Davarnejad, reza
Application of Iron Electrode in Textile Industry Wastewater Treatment Using Electro-fenton Technique: Experimental and Statistical Study [Volume 29, Issue 7, 2016, Pages 887-897]
-
Davarnejad, Reza
Pharmaceutical Wastewater Chemical Oxygen Demand Reduction: Electro-Fenton, UV-enhanced Electro-Fenton and Activated Sludge [Volume 32, Issue 12, 2019, Pages 1710-1715]
-
Davarpanah, L.
The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
-
Davarpanah, Leila
Performance of Continuous Electrocoagulation Process for Turbidity Removal from Sand Filter Backwash Water [Volume 32, Issue 12, 2019, Pages 1696-1703]
-
Dave, Dharin
Predictive Analysis for Optimal Text Visibility: A Comprehensive Study on Frame-of-Interest Prediction in Book Digitization Videos [(Articles in Press)]
-
David, Deebak
Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
-
Davoodi, Mohammad Reza
Output-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data [Volume 32, Issue 12, 2019, Pages 1753-1761]
-
Davoodi, S. A.
Hot Corrosion Behavior of Magnesite – Chromite Refractories Used in Reverberatory Furnaces at Sarcheshmeh Copper Complex [Volume 16, Issue 1, 2003, Pages 71-79]
-
Davoudi, M. Hadi
Influence of Compaction Condition on the Microstructure of a Non-Plastic Glacial Till [Volume 17, Issue 3, 2004, Pages 227-236]
-
Davoudi, R
Emergency Service Vehicle Location Problem with Batch Arrival of Demands [Volume 31, Issue 8, 2018, Pages 1240-1249]
-
Davydov, Vladislav
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Dayyari, S.
Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
-
Debela, T.
Implementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage [Volume 32, Issue 10, 2019, Pages 1437-1445]
-
Dede, M.
Utilizing Semi-Variograms and Geostatistical Approach for Land Value Model in Urban Region [Volume 36, Issue 12, 2023, Pages 2222-2231]
-
Dedi, D.
Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
-
Deepak, G. D.
Predictive Modelling and Optimization of Double Ring Electrode Based Cold Plasma Using Artificial Neural Network [Volume 37, Issue 1, 2024, Pages 83-93]
-
Deepak, M.
Experimental Investigation on Strength, Durability and Micro Structural Characteristics of Slag-Based Cement Mortar [Volume 37, Issue 4, 2024, Pages 763-778]
-
Dehghan, Hosein
Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
-
Dehghan, M.
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Dehghani, A
Using the Genetic Algorithm based on the Riedel Equation to Predict the Vapor Pressure of Organic Compounds [Volume 31, Issue 6, 2018, Pages 863-869]
-
Dehghani, A.
Seismic Damage and Disaster Management Maps (A Case Study) [Volume 21, Issue 4, 2008, Pages 337-344]
-
Dehghani, Hamzeh
Reliabilty-based Torsional Design of Reinforced Concrete Beams Strengthened with CFRP Laminate [Volume 26, Issue 10, 2013, Pages 1103-1110]
-
Dehghani, M
Finite Plate with Circular and Square Hole under Partial Loading [Volume 31, Issue 7, 2018, Pages 1109-1116]
-
Dehghani, M.
Influence of Water Cooling on Orthogonal Cutting Process of Ti-6Al-4V Using Smooth-Particle Hydrodynamics Method [Volume 32, Issue 8, 2019, Pages 1210-1217]
-
Dehghani, M.J.
Phase Only Synthesis of Antenna Patterns Using Iterative Restoration Methods [Volume 7, Issue 1, 1994, Pages 1-6]
-
Dehghani, Navid
Investigating the Effect of Underlying Fabric on the Bagging Behaviour of Denim Fabrics (RESEARCH NOTE) [Volume 32, Issue 9, 2019, Pages 1231-1237]
-
Dehghanian, F
Emergency Service Vehicle Location Problem with Batch Arrival of Demands [Volume 31, Issue 8, 2018, Pages 1240-1249]
-
Dehghanian, Farzad
The Simultaneous Effect of Holding Safety Stock and Purchasing Policies on the Economic Production Quantity Model Subject to Random Machine Breakdown [Volume 32, Issue 11, 2019, Pages 1643-1655]
-
Dehghanian, R.
Polymer Impregnation of Concrete by Methyl Methacrylate and its Effects on Mechanical Properties and Corrosion of Steel in Concrete [Volume 2, Issue 3, 1989, Pages 78-83]
-
Dehghanian, R.
Determination of Permeability of Concrete to Chloride Ions by Rapid Test Procedures [Volume 6, Issue 4, 1993, Pages 125-132]
-
Dehghanian, R.
Effect of Impressed Current on Bond Strength Between Steel Rebar and Concrete [Volume 11, Issue 3, 1998, Pages 121-134]
-
Dehghanian, R.
Evidence of the Potential Shift Mechanism in Crevice Corrosion (RESEARCH NOTES) [Volume 11, Issue 4, 1998, Pages 213-218]
-
Dehghanian, R.
Theorical Investigation of Linear Response for Passivated Metallic Electrode Under Potential Step (RESEARCH NOTE) [Volume 12, Issue 2, 1999, Pages 107-112]
-
Dehghanian, R.
A Hysteretic Two-phase Supply Modulator for Envelope Tracking RF Power Amplifiers [Volume 27, Issue 12, 2014, Pages 1832-1840]
-
Dehghani Mobarakeh, Mostafa
Energy and Exergy Analysis of Air PV/T Collector of Forced Convection with and without Glass Cover [Volume 26, Issue 8, 2013, Pages 913-926]
-
Dehghani Rayeni, A.
Effects of Gas Radiation on Thermal Performances of Single and Double Flow Plane Solar Heaters [Volume 33, Issue 6, 2020, Pages 1156-1166]
-
Dehghani Yazdeli, Reza
Fluid Dynamics in a Copper Converter: an Investigation on Mixing Phenomena in an Experimental Model [Volume 29, Issue 1, 2016, Pages 118-126]
-
Dehghan Manshadi, M
A Low Cost Numerical Simulation of a Supersonic Wind-tunnel Design [Volume 31, Issue 1, 2018, Pages 128-135]
-
Dehghan Manshadi, Mojtaba
Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE) [Volume 29, Issue 7, 2016, Pages 962-967]
-
Dehghan Manshadi, Mojtaba
Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]
-
Dehghan Naiery, A. A.
Core Loading Design for Bushehr Pressurized Water Reactor [Volume 3, Issue 1, 1990, Pages 63-79]
-
Dehvari, Khalilalrahman
Stimuli-responsive Biosynthesis of Gold Nanoparticles: Optimization, Kinetics, and Thermodynamics of Biosorption [Volume 32, Issue 11, 2019, Pages 1506-1515]
-
Dehzangi, A.
Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
-
Deiranlou, Mehdi
The Simultaneous Effect of Holding Safety Stock and Purchasing Policies on the Economic Production Quantity Model Subject to Random Machine Breakdown [Volume 32, Issue 11, 2019, Pages 1643-1655]
-
Delaram, F.
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Delavar, M.
Functionalized Halloysite Nanotubes and Graphene Oxide Nanosheets Fillers Incorporated in UF Membranes for Oil/Water Separation [Volume 36, Issue 7, 2023, Pages 1201-1210]
-
Delavar, M.
Application of Polyvinyl Chloride- Halloysite Nanotubes/Uio66-NH2 Mixed Matrix Membranes in Separation of Sunflower Oil from Water [Volume 37, Issue 9, 2024, Pages 1736-1745]
-
Delavarian, M.
A Multilayer Motion Direction Based Model for Tracking Vehicles at Intersections [Volume 33, Issue 10, 2020, Pages 1939-1950]
-
Delfani, F.
A Green Hazardous Waste Location-routing Problem Considering the Risks Associated with Transportation and Population [Volume 33, Issue 11, 2020, Pages 2272-2284]
-
Delfani, S.
Direct Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers [Volume 13, Issue 3, 2000, Pages 33-50]
-
Delfani, S.
Numerical Simulation of the Wake Flow Behind an Ellipse using Random Vortex Method (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 183-192]
-
Delfani, S.
The Effect of Geometrical Characteristics of Desiccant Wheel on its Performance [Volume 22, Issue 1, 2009, Pages 63-75]
-
Delkhosh, M.
A New Framework for Advancement of Power Management Strategies in Hybrid Electric Vehicles [Volume 33, Issue 3, 2020, Pages 468-476]
-
Delkhosh, Mojtaba
Modification of Equivalent Consumption Minimization Strategy for a Hybrid Electric Vehicle [Volume 29, Issue 12, 2016, Pages 1757-1764]
-
De Matteis, G.
Experimental and Numerical Study of Perforated Steel Plate Shear Panels [Volume 33, Issue 4, 2020, Pages 520-529]
-
Demenkov, P. A.
Construction of Underground and Multi-story Car Parks in High-density Urban Areas [Volume 37, Issue 2, 2024, Pages 224-236]
-
Demyanenkob, O.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Deng, S.
Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
-
Dengaev, A.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Dengaev, Aleksey
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Dengaev, Aleksey
Land assessment in mining regions considering ecology [(Articles in Press)]
-
Dengaev, A. V.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Dengqiu, Ma
Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
-
Deo, S
Combine Use of Fly Ash and Rice Husk Ash in Concrete to Improve its Properties (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1012-1019]
-
Deo, S.
Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
-
Deo, S. V
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Deo, S. V.
Early Age Shrinkage Behavior of Triple Blend Concrete [Volume 33, Issue 8, 2020, Pages 1459-1464]
-
Derakhshan, A. A.
Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
-
Derakhshan, Mostafa
A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
-
Derbentsev, V.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Derhambakhsh, Maryam
Preparation and Study of Molecular Structure of Copper Ions Doped in a Silica Xerogel Matrix [Volume 19, Issue 1, 2006, Pages 53-60]
-
Derife, M.
Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
-
Dermawan, H.
Numerical Simulation of Embankment Settlement in Vacuum Preloading Systems [Volume 36, Issue 4, 2023, Pages 817-823]
-
Desa, H. M
Vertical Ground Reaction Force Gait Patterns During Walking in Children with Autism Spectrum Disorders [Volume 31, Issue 5, 2018, Pages 705-711]
-
Desai, A.
Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
-
Desale, G. R.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Deshi, W.
Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
-
Deshmukh, A.
Hybrid Beamforming for Dual Functioning Multi-input Multi-output Radar using Dimension Reduced-baseband Piecewise Successive Approximation [Volume 36, Issue 1, 2023, Pages 182-190]
-
Detchev, D. D.
Signal Optimization During Radio Links Between a Transmitter and a Receiver Located in Adjacent Material Media with Differing Optical Densities (TECHNICAL NOTE) [Volume 13, Issue 3, 2000, Pages 87-89]
-
Devecioğlu, İ
Demonstration of Synaptic Connections with Unipolar Junction Transistor based Neuron Emulators [Volume 33, Issue 11, 2020, Pages 2195-2200]
-
Devi, Chithra
Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
-
Devi, Reeta
Global Stability for Thermal Convection in a Couple Stress Fluid Saturating a Porous Medium with Temperature-Pressure Dependent Viscosity: Galerkin Method [Volume 25, Issue 3, 2012, Pages 221-230]
-
Dewangan, U. K.
The Behaviour of Wave Propagation for Structural System Identification: A Comparative Study [Volume 35, Issue 12, 2022, Pages 2305-2312]
-
Dewangan, U. K.
A Baseline Free Method for Multiple Damage Identification and Localization using the Roving Mode Shape Response [Volume 36, Issue 5, 2023, Pages 946-954]
-
Dewangan, U. K.
Mode Shape Change Based System Identification: An Improvement using Distribute Computing and Roving Technique [Volume 36, Issue 9, 2023, Pages 1659-1666]
-
Dey, A.
Umpire’s Signal Recognition in Cricket Using an Attention based DC-GRU Network [Volume 37, Issue 4, 2024, Pages 662-674]
-
Dey, Arnab
Shot-ViT: Cricket Batting Shots Classification with Vision Transformer Network [(Articles in Press)]
-
Dezfoulian, H. R.
Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]
-
D. Ganji, D.
Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field [Volume 36, Issue 11, 2023, Pages 2087-2101]
-
Dhadse, G. D.
Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]
-
Dhaka, Vijaypal
Handwritten Character Recognition using Modified Gradient Descent Technique of Neural Networks and Representation of Conjugate Descent for Training Patterns [Volume 22, Issue 2, 2009, Pages 145-158]
-
Dhaka, Vijaypal
Offline Language-free Writer Identification based on Speeded-up Robust Features [Volume 28, Issue 7, 2015, Pages 984-994]
-
Dhakad, M. R.
Maximum Entropy Analysis for G/G/1 Queuing System (TECHNICAL NOTE) [Volume 16, Issue 2, 2003, Pages 163-170]
-
Dhanapal, D.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
Dhanasekar, S.
An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
-
Dhouib, S.
Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021, Pages 2642-2647]
-
Dhouib, S.
Hierarchical Coverage Repair Policies Optimization by Dhouib-Matrix-4 Metaheuristic for Wireless Sensor Networks using Mobile Robot [Volume 36, Issue 12, 2023, Pages 2153-2160]
-
Dhouibi, Hedi
Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
-
Dhundasi, A. A.
Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
-
Dhundasi, A. A.
An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
-
Dhyani, I.
Queue with Heterogeneous Server Under Resequencing Constraint [Volume 9, Issue 3, 1996, Pages 169-174]
-
Dhyani, I.
On Two-Echelon Multi-Server Queue with Balking and Limited Intermediate Buffer [Volume 14, Issue 2, 2001, Pages 131-142]
-
Diantoro, M.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Dickson, J. M.
Overview of Reverse Osmosis for Chemical Engineers Part 1, Fundamentals of Membrane Mass Transfer [Volume 1, Issue 4, 1988, Pages 163-180]
-
Dickson, J. M.
Overview of Reverse Osmosis for Chemical Engineers. Part 2: Applications of Transport Models [Volume 4, Issue 3, 1991, Pages 77-92]
-
Dideban, A.
An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
-
Dideban, A.
A Novel Approach to Modular Control of Highway and Arterial Networks using Petri Nets Modeling [Volume 36, Issue 8, 2023, Pages 1578-1588]
-
Dideban, A.
Controller Design of Hybrid-Time Delay-Petri Nets Based on Lyapunov Theory by Adding Control Places [Volume 36, Issue 10, 2023, Pages 1868-1879]
-
Didehvar, N.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Dieng, А.
Prediction of the Efficiency of Hydraulic Fracturing Based on Reservoir Parameters [Volume 36, Issue 12, 2023, Pages 2169-2174]
-
Dieng, А.
Study on Application of Arps Decline Curves for Gas Production Forecasting in Senegal [Volume 36, Issue 12, 2023, Pages 2207-2213]
-
Diluckshanaraj, R.
Comparison of Experimentally and Theoretically Determined Infiltration in Coarse Textured Soil [Volume 31, Issue 6, 2018, Pages 886-893]
-
Dinakaran, D
Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models [Volume 31, Issue 1, 2018, Pages 32-37]
-
Dindorkar, M. R.
Enhanced Face Presentation Attack Prevention Employing Feature Fusion of Pre-trained Deep Convolutional Neural Network Model and Thepade's Sorted Block Truncation Coding [Volume 36, Issue 4, 2023, Pages 807-816]
-
Din Mohammad, M.
Determination of Suitable Concentrations of H2O and CO2 in the Feed of Syngas Production (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 21-28]
-
Disher Al-hydary, I. A.
Optimizing the Properties of Metakaolin-based (Na, K)-Geopolymer Using Taguchi Design Method [Volume 33, Issue 4, 2020, Pages 631-638]
-
Divsalar, K.
Numerical Simulation of Hydrodynamic Properties of Alex Type Gliders [Volume 33, Issue 7, 2020, Pages 1387-1396]
-
Dixit, A.
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Dixit, U. D.
An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
-
Djamaluddin, A. R.
Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
-
Djatna, T.
Blockchain-based Traceability System for Indonesian Coffee Digital Business Ecosystem [Volume 36, Issue 5, 2023, Pages 879-893]
-
Djavareshkian, M. H.
Transonic Turbulent Flow Simulation using Pressure-Based Method and Normalized Variable Diagram [Volume 17, Issue 3, 2004, Pages 299-310]
-
Djavareshkian, Mohammad Hossian
Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]
-
Djavidi, M.
Numerical Investigation of Combined Radiation and Nutral Convention Heat Transfer in a Horizonal Annulus [Volume 12, Issue 4, 1999, Pages 259-270]
-
Djemmah, S.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Dobrucky, B.
The Object Detection Efficiency in Synthetic Aperture Radar Systems [Volume 33, Issue 2, 2020, Pages 337-343]
-
Dodangeh, Ali
Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
-
DolatiAsl, K.
Estimating Solar Radiation and Developing Iran’s Atlas Map of Optimum Monthly Tilt Angle (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1197-1204]
-
DolatiAsl, K.
The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
-
Domeyri Ganji, Davood
Simulation of Dual Fuel Combustion of Direct Injection Engine with Variable Natural Gas Premixed Ratio [Volume 32, Issue 9, 2019, Pages 1327-1336]
-
Domiri Ganji, D.
Generating Electrical Power using Movement of Various Vehicles in New Lighting Base [Volume 35, Issue 2, 2022, Pages 387-396]
-
Domiri Ganji, D.
Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
-
Domiri Ganji, D.
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
-
Domiri Ganji, D.
A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
-
Domiri Ganji, D.
Chemical Reaction-Diffusion Model Around a Vessel for Studying Temperature and Concentration of Three Chemical Species by Finite Element Method [Volume 36, Issue 1, 2023, Pages 171-181]
-
Domiri Ganji, D.
A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
-
Domiri Ganji, D.
Optimizing Heat Transfer in Microchannel Heat Sinks: A Numerical Investigation with Nanofluids and Modified Geometries [Volume 37, Issue 5, 2024, Pages 860-875]
-
Domiri Ganji, Davood
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Domiri- Ganji, Davood
Numerical and Experimental Analysis of Thermal Boundary Conditions of HDD-Engine Cylinder Head for Different Combustion and Fuel [(Articles in Press)]
-
Domiri- Ganji, Davood
Experimental analysis of subcooled flow boiling heat flux on gray cast iron block in heavy-duty diesel engine-like conditions: Optimization using central composite design [(Articles in Press)]
-
Domiri-Ganji, D.
Hybrid Analysis of Micropolar Ethylene-glycol Nanofluid on Stretching Surface Mounted Triangular, Rectangular and Chamfer Fins by FEM Strategy and Optimization with RSM Method [Volume 35, Issue 5, 2022, Pages 845-854]
-
Domiri-Ganji, D.
Experimental Examination of Gas-liquid Two-phase Flow Patterns in an Inclined Rectangular Channel with 90° Bend for Various Vertical Lengths [Volume 35, Issue 4, 2022, Pages 685-691]
-
Dong, P. V.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Dong, P. V.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Doniavi, Ali
Numerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE) [Volume 29, Issue 8, 2016, Pages 1175-1182]
-
Doniavi, Ali
Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA [Volume 29, Issue 9, 2016, Pages 1307-1313]
-
Doniavi, Ali
Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
-
Doostdar, H
Experimental Study and Modeling of Reinforced Concrete Beams Strengthened by Post-Tensioned External Reinforcing Bars [Volume 23, Issue 2, 2010, Pages 127-144]
-
Doost Hoseini, A. M.
Automatic Bounding Estimation in Modified Nlms Algorithm [Volume 15, Issue 1, 2002, Pages 35-42]
-
Doost Hoseini, A. M.
Blind Separation of Jointly Stationary Correlated Sources [Volume 16, Issue 4, 2003, Pages 331-346]
-
Doostizadeh, M.
A New Procedure for Reactive Power Market Clearing Considering Distributed Energy Resources [Volume 32, Issue 8, 2019, Pages 1134-1143]
-
Doost Mohammadi, M.H.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Doost Mohammadi, mohammad hossein
Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
-
Doreswamy, D.
Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
-
Doreswamy, D.
Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
-
Doreswamy, Deepak
Physico-Mechanical Characterization of Recycled Waste Tire Rubber and Rice Straw Reinforced Composite [(Articles in Press)]
-
Dorfeshan, Y.
Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
-
Dorokhin, Egor
Development of a hydraulic circulation sub as a tool to prevent mud losses during well drilling [(Articles in Press)]
-
Doroudi, A.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Doroudyan, Mohammad Hadi
Multi-objective Efficient Design of np Control Chart Using Data Envelopment Analysis [Volume 26, Issue 6, 2013, Pages 621-630]
-
Doroudyan, Mohammad Hadi
Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
-
Dorrani, Z.
Image Edge Detection with Fuzzy Ant Colony Optimization Algorithm [Volume 33, Issue 12, 2020, Pages 2464-2470]
-
Dorrani, Z.
Traffic Scene Analysis and Classification using Deep Learning [Volume 37, Issue 3, 2024, Pages 496-502]
-
Douadi, T.
Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
-
Doustary, M. A.
Heuristic Process Model Simplification in Frequency Response Domain [Volume 17, Issue 1, 2004, Pages 19-39]
-
Doustdar, M. M.
Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
-
Dowlati, S
Quality Factor of Free In-plane Vibration of a Fully Clamped Rectangular Micro-plate [Volume 31, Issue 1, 2018, Pages 96-103]
-
Dowlati, S.
Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
-
Drake, P. R.
Network Planning Using Iterative Improvement Methods and Heuristic Techniques [Volume 15, Issue 1, 2002, Pages 63-74]
-
Drake, P. R.
A Novel Experimental Analysis of the Minimum Cost Flow Problem [Volume 22, Issue 3, 2009, Pages 251-268]
-
Drake, P. R.
Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]
-
Drebenstedt, C.
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Dresscher, D.
A New Mechanical Design for Legged Robots to Reduce Energy Consumption [Volume 33, Issue 12, 2020, Pages 2530-2537]
-
Drid, S
A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System [Volume 31, Issue 4, 2018, Pages 580-587]
-
Drozdov, I. M.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Du, X.
The Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 175-179]
-
Dubey, A. K.
Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
-
Dubini, Gabriele
A Study on Ratio of Loss to Storage Modulus for the Blood Clot [Volume 27, Issue 8, 2014, Pages 1167-1172]
-
Duc, N. V.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Duhan, Ravi
Effect of Activated Flux on Properties of SS 304 Using TIG Welding [Volume 28, Issue 2, 2015, Pages 290-295]
-
Duma, Agam
Ultrasound Assisted In Situ Esterification of Rubber Seeds Oil for Biodiesel Production (RESEARCH NOTE) [Volume 29, Issue 12, 2016, Pages 1635-1641]
-
Dung, H. T.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Durali, M.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Durali, Mohammad
Investigation of Wagon Derailment Moving on Random Rail Irregularities using Nonlinear 3-Dimentional Model (RESEARCH NOTE) [Volume 21, Issue 4, 2008, Pages 385-400]
-
Dvoynikov, M.
Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]
-
Dvoynikov, M.
Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor [Volume 33, Issue 7, 2020, Pages 1423-1430]
-
Dvoynikov, Mikhail Vladimirovich
Analysis of the methodology for selecting the rheological model of cement slurry for determining the technological parameters of well casing [(Articles in Press)]
-
Dvoynikov, M. V.
Developments Made in the Field of Drilling Fluids by Saint Petersburg Mining University [Volume 33, Issue 4, 2020, Pages 702-711]
-
Dyamannavr, Neelappa
Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
-
Dzyura, V. O.
Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
E
-
E, Natarajan
An Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules [Volume 27, Issue 11, 2014, Pages 1713-1722]
-
E. Babadi, M.
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Ebad, M.
In Silico Analysis of Stem Cells Mechanical Stimulations for Mechnoregulation Toward Cardiomyocytes [Volume 35, Issue 11, 2022, Pages 2229-2237]
-
Ebadi, A.
A New Restricted Earth Fault Relay Based on Artificial Intelligence [Volume 32, Issue 1, 2019, Pages 62-70]
-
Ebadi, A.
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Ebadi, A.
Presenting an Adaptive Restraint Method to Improve Performance of Ground Differential Protection of Power Transformer [Volume 35, Issue 11, 2022, Pages 2213-2219]
-
Ebadi, A.
Discrimination between Inrush and Internal Fault Currents in Power Transformers Using Hyperbolic S-Transform [Volume 36, Issue 12, 2023, Pages 2184-2189]
-
Ebadi Zahedan, A.
Improving Reliability of Active Distribution Networks Using Probabilistic Assessment of Renewable Resource Units [Volume 37, Issue 9, 2024, Pages 1780-1789]
-
Ebadzadeh, T.
Infiltration of Porous Zircon Preforms With Alumina Precursor (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 295-300]
-
Ebenezer, S. P.
Window Air Conditioner with Orthodox Refrigerants [Volume 32, Issue 2, 2019, Pages 322-327]
-
Ebrahimi, A.
A New Approach for Vibration Analysis of a Cracked Beam [Volume 18, Issue 4, 2005, Pages 319-330]
-
Ebrahimi, A.
Dairy Wastewater Treatment using Three-Stage Rotating Biological Contactor (NRBC) [Volume 22, Issue 2, 2009, Pages 107-114]
-
Ebrahimi, A.
Electrokinetic and Sediment Remediation in Microbial Fuel Cell (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 489-494]
-
Ebrahimi, A.
Designing a Model for Creation of Export Consortiain Business Cluster [Volume 33, Issue 3, 2020, Pages 459-467]
-
Ebrahimi, Afshin
Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
-
Ebrahimi, Atiyeh
Electrical Energy Management in Industrial Wastewater Treatment Plant [Volume 32, Issue 9, 2019, Pages 1269-1276]
-
Ebrahimi, B.
Optimal Sliding-Mode Guidance Law for Fixed-Interval Propulsive Maneuvers [Volume 21, Issue 2, 2008, Pages 105-112]
-
Ebrahimi, E.
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Ebrahimi, E.
Ultra Low Power Temperature Compensated Complementary Metal Oxide Semiconductor Ring Oscillator in Subthreshold [Volume 36, Issue 1, 2023, Pages 108-118]
-
Ebrahimi, Ghanbar
Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites [Volume 17, Issue 1, 2004, Pages 95-104]
-
Ebrahimi, M
Bi-objective Build-to-order Supply Chain Problem with Customer Utility [Volume 31, Issue 7, 2018, Pages 1066-1073]
-
Ebrahimi, M.
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Ebrahimi, M.
Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
-
Ebrahimi, N.
Evaluation of Corrosion Resistance of Bi-layered Plasma-sprayed Coating on Titanium Implants [Volume 35, Issue 4, 2022, Pages 635-643]
-
Ebrahimi Alavijeh, Bahareh
Experimental Investigation and Modeling of the Dynamic Properties of slag Ballast and Limestone Ballast [(Articles in Press)]
-
Ebrahimi-Nejad, S
Experimental Investigation of Energy Consumption and Performance of Reverse Osmosis Desalination using Design of Experiments Method [Volume 31, Issue 1, 2018, Pages 79-87]
-
Ebrahimi Saryazdi, S.M.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Ebrahimnejad, S.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Ebrahimnejad, Sadoullah
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach [Volume 33, Issue 1, 2020, Pages 124-133]
-
Ebrahimnezhad, P.
Survival of Lactobacillus Acidophilus as Probiotic Bacteria using Chitosan Nanoparticles [Volume 30, Issue 4, 2017, Pages 456-463]
-
Ebrahimnezhad, S.
A New Extended Analytical Hierarchy Process Technique with Incomplete Interval-valued Information for Risk Assessment in IT Outsourcing [Volume 30, Issue 5, 2017, Pages 739-748]
-
Ebrahimpour, B.
Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
-
Ebrahimzadeh, A.
A Q-learning Based Continuous Tuning of Fuzzy Wall Tracking [Volume 25, Issue 4, 2012, Pages 355-366]
-
Ebrahimzadeh, A.
Optimal Node Selection for Cooperative Spectrum Sensing in Cognitive Radio Sensor Networks with Energy Harvesting [Volume 37, Issue 5, 2024, Pages 833-841]
-
Ebrahimzadeh, Iman
Comparison of Mechanical Behavior and Microstructure of Continuous Cast and Hot Worked CuZn40Al1 Alloy (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 249-256]
-
Ebtehaj, Isa
Numerical Analysis of Sediment Transport in Sewer Pipe [Volume 28, Issue 11, 2015, Pages 1564-1570]
-
Ebtehaj, Isa
A Comparative Study of Extreme Learning Machines and Support Vector Machines in Prediction of Sediment Transport in Open Channels [Volume 29, Issue 11, 2016, Pages 1499-1506]
-
Edalat, M.
Prediction of Temperature Profile of a Buried Gas Pipeline Through Utilization of Corresponding States Principle [Volume 2, Issue 1, 1989, Pages 1-4]
-
Edalat, M.
A New Vapor Pressure Equation [Volume 3, Issue 3, 1990, Pages 98-103]
-
Edalat, M.
A Self-Consistent Technique for the Construction and Evaluation of the Three-Parameter Corresponding States Principles [Volume 6, Issue 4, 1993, Pages 133-146]
-
Edalati, M.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Edem, I. F
Energy Efficiency Analyses of Toolpaths in a Pocket Milling Process [Volume 31, Issue 5, 2018, Pages 847-855]
-
Edem, Isuamfon F.
Optimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy [Volume 30, Issue 4, 2017, Pages 591-596]
-
Edmonds, D.V.
Graphite Phase Formation in Al Alloyed Ductile Irons [Volume 15, Issue 3, 2002, Pages 261-272]
-
Edrees, S. J.
The Effect of Transition Metals Incorporation on the Structural and Magnetic Properties of Magnesium Oxide Nanoparticles [Volume 33, Issue 4, 2020, Pages 647-656]
-
Edrissi, M.
Determination of the Rheological Properties of Hydroxyl Terminated Polybutadiene (HTPB) Mixtures With Energetic Materials and Presenting Empricial Models [Volume 18, Issue 4, 2005, Pages 413-420]
-
Edrissi, M.
Novel Method for the Preparation of Copper Phthalocyanin Blue Nanoparticles in an Electrochemical Cell Irradiated by Microwave (RESEARCH NOTE) [Volume 20, Issue 3, 2007, Pages 257-262]
-
E.Ergin, M
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Efendiev, V. S.
Investigation of the Effect of Exhaust Gas Recirculation (EGR) on pollutants Emission From Si Engine Exhaust Gasese (RESEARCH NOTES) [Volume 11, Issue 2, 1998, Pages 115-120]
-
Efimov, Alexey
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Efimova, E. A.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Efremenko, D.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Efremenko, Daniil
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Eftekhari, M.
Development of an Implicit Numerical Model for Calculation of Sub and Super Critical Flows [Volume 18, Issue 1, 2005, Pages 27-38]
-
Eftekhari, M.
Development of an Implicit Numerical Model for Calculation of SUB-and Super-Critical Flows [Volume 18, Issue 1, 2005, Pages 85-95]
-
Eftekhari, Mahdi
A Differential Evolution and Spatial Distribution based Local Search for Training Fuzzy Wavelet Neural Network [Volume 27, Issue 8, 2014, Pages 1185-1194]
-
Eftekhari, Malihe
Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method [Volume 27, Issue 3, 2014, Pages 367-374]
-
Eftekhari, Mojtaba
Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method [Volume 27, Issue 3, 2014, Pages 367-374]
-
Eftekhari, Mojtaba
Post-critical Behavior of Three- dimensional Composite Beams Near the Autoparametric Resonance under Flapwise Excitation [Volume 29, Issue 6, 2016, Pages 817-826]
-
Eftekhari, Mojtaba
The Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System [Volume 30, Issue 3, 2017, Pages 448-455]
-
Eghbal Jahromi, H.J.
Design of Logic Network for Generating Sequency Ordered Hadamard Matrix H [Volume 1, Issue 1, 1988, Pages 47-52]
-
Eghtesad, M.
Integrator Backstepping Control of a 5 DoF Robot Manipulator with Cascaded Dynamics [Volume 16, Issue 4, 2003, Pages 373-383]
-
EHSAN, MEHDI
Real Time Dynamic Simulation of Power System Using Multiple Microcomputers [Volume 3, Issue 1, 1990, Pages 15-22]
-
Ehsani, I.
Market-based Real Time Congestion Management in a Smart Grid Considering Reconfiguration and Switching Cost [Volume 36, Issue 5, 2023, Pages 842-857]
-
Ehsani, M.R.
Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials [Volume 15, Issue 4, 2002, Pages 319-332]
-
Ehsani, N.
Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
-
Ehsani, N.
A Study of Zeta Potential of Plasma Sprayed Hydroxyapatite Coating in Four Simulated Physiological Solutions [Volume 16, Issue 4, 2003, Pages 343-354]
-
Ehsanian, M.
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Ehsanifar, Mohammad
Applying fuzzy UTASTAR for sustainable supplier selection in Iran's construction industry [(Articles in Press)]
-
Ehsanpour, Maryam
A Novel Design of Reversible Multiplier Circuit (TECHNICAL NOTE) [Volume 26, Issue 6, 2013, Pages 577-586]
-
Ehsany, Rouhollah
Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
-
Ehteshamzadeh, Maryam
Microstructure and Corrosion Performance of Silica Coatings on Aluminum Surface Prepared by Plasma Electrolysis Technique [Volume 22, Issue 3, 2009, Pages 291-298]
-
Eichlseder, W
The Effect of Various Parameters on Out-of-phase Thermo-mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy [Volume 26, Issue 12, 2013, Pages 1461-1470]
-
Einy-Sarkalleh, G. R.
Developing a Fuzzy Measurement of Alternatives and Ranking Compromise Solution Method for Determining Essential Barriers in Iranian Car Industry [Volume 36, Issue 1, 2023, Pages 90-97]
-
Einy-Sarkalleh, G. R.
A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
-
Ejjaaouani, Houssine
Shrinkage Curve: Experimental Study and Modelling [Volume 25, Issue 3, 2012, Pages 203-210]
-
Ekaid, A. L.
Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies [Volume 35, Issue 10, 2022, Pages 2007-2017]
-
Ekhlassi, A.
Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
-
Ekhteraei Toussi, Hamid
Frequency Analysis for a Timoshenko Beam Located on an Elastic Foundation [Volume 24, Issue 1, 2011, Pages 87-105]
-
Ekhtiyari, E.
The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]
-
Ekhtiyari, E.
Study on Wicking Measurement in Thin Layer Textiles by Processing Digital Images [Volume 23, Issue 1, 2010, Pages 101-108]
-
Eksiri, Z.
Heuristic Process Model Simplification in Frequency Response Domain [Volume 17, Issue 1, 2004, Pages 19-39]
-
Ekundayo, O. O.
Bending Strength Evaluation of Glulam Beams Made from Selected Nigerian Wood Species [Volume 35, Issue 11, 2022, Pages 2120-2129]
-
EL ABDELLAOUI, Larbi
New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1056-1061]
-
Elahi, E.
New Model of Burden Thickness Estimation for Blasting of Open Pit Mines [Volume 34, Issue 5, 2021, Pages 1381-1389]
-
Elahi, Z.
A Queuing Model for Stochastic Location-inventory Problem with Waiting Cost Considerations [Volume 31, Issue 6, 2018, Pages 959-966]
-
Elavenil, S.
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
El-damcese, Medhat
Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
-
Eldirderi, M.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
El-Ghamry, Eman
Reliability Analysis of Three Elements Series and Parallel Systems under Time-varying Fuzzy Failure Rate [Volume 27, Issue 4, 2014, Pages 553-560]
-
El Ghoulbzouri, A.
Seismic Vulnerability of Irregular Reinforced Concrete Buildings Considering the Soil-structure Interaction [Volume 37, Issue 1, 2024, Pages 104-114]
-
El Ghoulbzouri, Abdelouafi
Effects of Berms on Rubble Mound Breakwater Stability under Seismic Loading [(Articles in Press)]
-
EL Ghoulbzouri, A.
Numerical Simulation of Fiber-reinforced Concrete under Cyclic Loading using Extended Finite Element Method and Concrete Damaged Plasticity [Volume 36, Issue 10, 2023, Pages 1815-1826]
-
EL Ghoulbzouri, A.
Seismic Fragility of FRC Columns using Incremental Dynamic Analysis and eXtended Finite Element Method [Volume 37, Issue 2, 2024, Pages 268-282]
-
EL HIRI, Mariam
Suppliers Selection in Consideration of Risks by a Neural Network [Volume 32, Issue 10, 2019, Pages 1454-1463]
-
Elias, Md.
Mixed Convection Flow in a Rectangular Ventilated Cavity with a Heat Conducting Solid Circular Cylinder at the Center [Volume 24, Issue 1, 2011, Pages 93-105]
-
El Janous, S.
Seismic Vulnerability of Irregular Reinforced Concrete Buildings Considering the Soil-structure Interaction [Volume 37, Issue 1, 2024, Pages 104-114]
-
El Janous, S.
Seismic Fragility of FRC Columns using Incremental Dynamic Analysis and eXtended Finite Element Method [Volume 37, Issue 2, 2024, Pages 268-282]
-
EL-Kelity, A. M.
Effect of Water Absorption on the Tensile Characteristics of Natural/ Synthetic Fabrics Reinforced Hybrid Composites [Volume 33, Issue 11, 2020, Pages 2339-2346]
-
Elkhaleefa, A.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
Elkhazen, M. I.
Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
-
El Khouddar, Y.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Elmasry, Mohamed I.
An Efficient Technique for Substrate Coupling Parasitic Extraction with Application to RF/Microwave Spiral Inductors (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 265-271]
-
Elmasry, Mohamed I.
Ultra-Widband Distributed Amplifier Using Loss Compensation Technique on Both Input and Output Circuit [Volume 17, Issue 4, 2004, Pages 377-386]
-
ElMekkawy, T.Y.
Solving a New Multi-Period Mathematical Model of the Rail-Car Fleet Size and Car Utilization by Simulated Annealing [Volume 22, Issue 1, 2009, Pages 33-46]
-
El-Menshawy, O. F.
Electrical and Mechanical Performance of Hybrid and Non-hybrid Composites [Volume 32, Issue 4, 2019, Pages 580-586]
-
Elmkhah, H.
Corrosion Behavior of TiN/CrN Nanoscale Multi-layered Coating in Ringer's Solution [Volume 33, Issue 2, 2020, Pages 329-336]
-
Elmkhah, H.
Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
-
Elmorssy, M.
Modelling Departure Time, Destination and Travel Mode Choices by Using Generalized Nested Logit Model: Discretionary Trips [Volume 33, Issue 2, 2020, Pages 186-197]
-
Elmorssy, Mahmoud
Application of Discrete 3-level Nested Logit Model in Travel Demand Forecasting as an Alternative to Traditional 4-Step Model [Volume 32, Issue 10, 2019, Pages 1416-1428]
-
Elrawaff, Blkasem
Experimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips [Volume 28, Issue 5, 2015, Pages 671-676]
-
Elsad, R. A.
Electrical and Mechanical Performance of Hybrid and Non-hybrid Composites [Volume 32, Issue 4, 2019, Pages 580-586]
-
Elsad, R. A.
Effect of Water Absorption on the Tensile Characteristics of Natural/ Synthetic Fabrics Reinforced Hybrid Composites [Volume 33, Issue 11, 2020, Pages 2339-2346]
-
El sissy, A. R.
Optimization of Ultrasonic-assisted Friction Stir Welded using Taguchi Approach [Volume 35, Issue 1, 2022, Pages 213-219]
-
EL-Sissy, A. R.
Electrical and Mechanical Performance of Hybrid and Non-hybrid Composites [Volume 32, Issue 4, 2019, Pages 580-586]
-
El-wazery, M. S.
Optimization of Ultrasonic-assisted Friction Stir Welded using Taguchi Approach [Volume 35, Issue 1, 2022, Pages 213-219]
-
El-wazery, mahmoud
Electrical and Mechanical Performance of Zirconia-Nickel Functionally Graded Materials [Volume 26, Issue 4, 2013, Pages 375-382]
-
El-wazery, mahmoud
Mixed Mode Crack Propagation of Zirconia/Nickel Functionally Graded Materials [Volume 26, Issue 8, 2013, Pages 885-894]
-
El-wazery, mahmoud
Fabrication and Characteristics of 8YSZ/Ni functionally Graded Materials by Applying Spark Plasma Sintering Procedure (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1907-1912]
-
El-wazery, mahmoud
Health Monitoring of Welded Steel Pipes by Vibration Analysis [Volume 28, Issue 12, 2015, Pages 1782-1789]
-
El-wazery, M. S.
Electrical and Mechanical Performance of Hybrid and Non-hybrid Composites [Volume 32, Issue 4, 2019, Pages 580-586]
-
El-Wazery, M. S.
ModeI fracture toughness of Carbon/glass hybrid comopsite [Volume 34, Issue 11, 2021, Pages 2418-2423]
-
El-Wazery, M. S
Mechanical Characterization of Glass-Basalt-Carbon/Polyester Hybrid Composites [Volume 31, Issue 7, 2018, Pages 1139-1145]
-
EL-Wazery, M. S.
Effect of Water Absorption on the Tensile Characteristics of Natural/ Synthetic Fabrics Reinforced Hybrid Composites [Volume 33, Issue 11, 2020, Pages 2339-2346]
-
EL-Wazery, M. S.
Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
-
Elyasi, M.
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process [Volume 33, Issue 2, 2020, Pages 344-349]
-
El Yassari, S.
Numerical Simulation of Fiber-reinforced Concrete under Cyclic Loading using Extended Finite Element Method and Concrete Damaged Plasticity [Volume 36, Issue 10, 2023, Pages 1815-1826]
-
El Yassari, S.
Seismic Fragility of FRC Columns using Incremental Dynamic Analysis and eXtended Finite Element Method [Volume 37, Issue 2, 2024, Pages 268-282]
-
Emadi, M.
Improving the Accuracy of Brain Tumor Identification in Magnetic Resonanceaging using Super-pixel and Fast Primal Dual Algorithm [Volume 36, Issue 3, 2023, Pages 505-512]
-
Emadi, S.
Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
-
Emami, Leila
The Effects of the Size of Decision -making Units on Allocating Fixed Costs in Supply Chains [(Articles in Press)]
-
Emami, M. R.
An Upper Bound Approach for Analysis of Hydroforming of Sheet Metals [Volume 17, Issue 4, 2004, Pages 389-398]
-
Emami, N.
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
-
Emamian, S.
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Emamjomeh, Hossein
Entropy-based Serviceability Assessment of Water Distribution Networks, Subjected to Natural and Man-Made Hazards [Volume 27, Issue 5, 2014, Pages 675-688]
-
Emdad, Homayoun
Investigating the Third Order Solitary Wave Generation Accuracy using Incompressible Smoothed Particle Hydrodynamics [Volume 29, Issue 3, 2016, Pages 426-435]
-
Emedzadeh, Mahdis
Experimental Study on the Factors Affecting Hexavalent Chromium Bioreduction by Bacillus cereus [Volume 29, Issue 2, 2016, Pages 152-159]
-
Emin Erdin, M.
Effect of Coating Materials on Wear in Internal Gears [Volume 30, Issue 11, 2017, Pages 1792-1799]
-
EN-NADI, Abdelali
Suppliers Selection in Consideration of Risks by a Neural Network [Volume 32, Issue 10, 2019, Pages 1454-1463]
-
Enshayi, M.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Entekhabi, A. M.
A New Technique for Online Open Switch Fault Detection and Location in Single-phase Pulse Width Modulation Rectifier [Volume 35, Issue 9, 2022, Pages 1759-1764]
-
Entezari, A.
Joint Allocation of Computational and Communication Resources to Improve Energy Efficiency in Cellular Networks [Volume 32, Issue 11, 2019, Pages 1627-1633]
-
Eqbali, A. H.
Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
-
Erfan, Mohammad
Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
-
Erfani, S.
Shear-Flexural Interaction in Analysis of Reduced Web Section Beams using VM Link Element [Volume 20, Issue 1, 2007, Pages 23-35]
-
Erfani, S. H.
An Effective Method for Utility Preserving Social Network Graph Anonymization Based on Mathematical Modeling [Volume 31, Issue 10, 2018, Pages 1624-1632]
-
Ergin, M. E.
Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
-
Erigela, R.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Erkan, T. E.
A Study of Load Demand Forecasting Models in Electricity using Artificial Neural Networks and Fuzzy Logic Model [Volume 35, Issue 6, 2022, Pages 1111-1118]
-
Ernawati, L.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Ernawati, Lusi
Mesoporous WO3/TiO2 Nanocomposites Photocatalyst for Rapid Degradation of Methylene Blue in Aqueous Medium [Volume 32, Issue 10, 2019, Pages 1345-1352]
-
ERRKIK, Ahmed
New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1056-1061]
-
Esfahani, M.R.
Axial Compressive Strength of Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers (FRP) [Volume 18, Issue 1, 2005, Pages 9-19]
-
Esfahani, M.R.
Behavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets [Volume 20, Issue 1, 2007, Pages 49-58]
-
Esfahanian, M.
on Minizing Mechanical Stresses of the Rail Way Wheels [Volume 13, Issue 1, 2000, Pages 61-76]
-
Esfahanian, M.
Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
-
Esfahanian, Mehry
Enhanced Bioethanol Production in Batch Fermentation by Pervaporation Using a PDMS Membrane Bioreactor [Volume 25, Issue 4, 2012, Pages 249-258]
-
Esfahanipour, Akbar
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Esfandian, H.
Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm [Volume 33, Issue 5, 2020, Pages 712-719]
-
Esfandian, H.
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Esfandian, Hossein
Removal of Diazinon from Aqueous Solutions in Batch Systems Using Cu-modified Sodalite zeolite: An Application of Response Surface Methodology [Volume 28, Issue 11, 2015, Pages 1552-1563]
-
Esfandian, Hossein
Removal of Strontium Ions by Synthetic Nano Sodalite Zeolite from Aqueous Solution [Volume 29, Issue 2, 2016, Pages 160-169]
-
Esfandian, Hossein
Removal of Dimethyl Phthalate from Aqueous Solution by Synthetic Modified Nano Zeolite Using Cu2O Nanoparticles [Volume 29, Issue 9, 2016, Pages 1198-1207]
-
Esfandian, N.
Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm [Volume 33, Issue 5, 2020, Pages 712-719]
-
Esfandian, N.
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Esfandian, Nafiseh
Phoneme Classification Using Temporal Tracking of Speech Clusters in Spectro-temporal Domain [Volume 33, Issue 1, 2020, Pages 105-111]
-
Esfandyari, Ramin
The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections [Volume 27, Issue 7, 2014, Pages 1005-1014]
-
Es-haghi, M.S.
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Eshaghi, Mohadese
A New Algorithm for Voice Activity Detection Based on Wavelet Packets (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 225-232]
-
Eshraghi, M. J.
Microstructure and Corrosion Behavior of Al-Cu-Fe Quasi-crystalline Coated Ti-6Al-4V Alloy [Volume 36, Issue 10, 2023, Pages 1880-1891]
-
Eshtehardian, E.
Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
-
Eskandari, Atieh
Effect of Particle Size of NaX Zeolite on Adsorption of CO2/CH4 [Volume 29, Issue 1, 2016, Pages 1-7]
-
Eskandari-Ghadi, M.
Vertical and Rocking Impedances for Surface Rigid Foundation Resting on a Transversely Isotropic Half-Space [Volume 15, Issue 1, 2002, Pages 1-9]
-
Eskandari-Ghadi, M.
Fundamental Steady state Solution for the Transversely Isotropic Half Space [Volume 16, Issue 2, 2003, Pages 105-122]
-
Eskandari-Ghadi, M.
Wave Equations in Transversely Isotropic Media in Terms of Potential Functions (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 125-132]
-
Eslambolchi, P.
Fuzzy Clustering Approach Using Data Fusion Theory and its Application To Automatic Isolated Word Recognition [Volume 16, Issue 4, 2003, Pages 329-336]
-
Eslami Afrooz, Iman
Effect of Novel Swirl Distributor Plate on Hydrodynamics of Fluidized Bed Gasifier [Volume 32, Issue 10, 2019, Pages 1358-1365]
-
Eslami-Chalandar, F.
Reversible Logic Multipliers: Novel Low-cost Parity-Preserving Designs [Volume 32, Issue 3, 2019, Pages 381-392]
-
Esmaeili, A.
Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
-
Esmaeili, Ali
Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]
-
Esmaeili, F.
Numerical Study of Flow Field in New Design Dynamic Cyclone Separators [Volume 33, Issue 2, 2020, Pages 357-365]
-
Esmaeili, Q.
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Esmaeili, S.
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Esmaeili, Sareh
Development of a Predictive Finite Element Model For Investigation of Phases Behavior After Cold Rolling Process [Volume 27, Issue 3, 2014, Pages 425-430]
-
Esmaeili, Sorayya
Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
-
Esmaeilian, F.
Multi-objective Optimization of Semi-active Control of Seismically Exited Buildings Using Variable Damper and Genetic Algorithms [Volume 25, Issue 3, 2012, Pages 265-276]
-
Esmaeiltabar Nesheli, p.
Response Modification Factor of Chevron Braced Frame With Pall Friction Damper [Volume 26, Issue 2, 2013, Pages 127-136]
-
Esmaeilzadeh, Z.
Risk-Based AC/DC Hybrid Distribution System Planning [Volume 37, Issue 5, 2024, Pages 876-886]
-
Esmaeli, A.
Improving 3-D Imaging Breast Cancer Diagnosis Systems Using a New Method for Placement of Near-infrared Sources and Detectors [Volume 33, Issue 6, 2020, Pages 1105-1113]
-
Esmaelzadeh, Reza
Differential Flatness Method Based on Pre-set Guidance and Control Subsystem Design for a Surface to Surface Flying Vehicle (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 912-919]
-
Esmaieli, A.
Various Approaches to Thermodynamic Optimization of a Hybrid Multi-effect Evaporation with Thermal Vapour Compression and Reverse Osmosis Desalination System Integrated to a Gas Turbine Power Plant [Volume 32, Issue 5, 2019, Pages 777-789]
-
Esmaielzadeh Kandjani, A.
Particles Size Distribution Effect on 3d Packing of Nanoparticles Into a Bounded Region [Volume 20, Issue 3, 2007, Pages 281-291]
-
Esmaielzadeh Kandjani, A.
Log-Normal and Mono-Sized Particles’ Packing into a Bounded Region [Volume 22, Issue 1, 2009, Pages 57-62]
-
Esmaielzadeh Kandjani, A.
Preparation of Cobalt Oxide/Zinc Oxide Nanocomposite [Volume 23, Issue 2, 2010, Pages 133-138]
-
Esmaielzadeh Kandjani, A.
Effects of the pH of Initial Solution on Hydrothermally Synthesized TiO2 Nanoparticles [Volume 25, Issue 2, 2012, Pages 131-136]
-
Esmaielzadeh Kandjani, A.
Wall Effect in 3D Simulation Of Same Sized Particles Packing [Volume 25, Issue 2, 2012, Pages 137-142]
-
Esmaileyan, Zeynab
A Database for Automatic Persian Speech Emotion Recognition: Collection, Processing and Evaluation [Volume 27, Issue 1, 2014, Pages 79-90]
-
Esmaili, K.
Experimental Investigation of Porosity, Installation Angle, Thickness and Second Layer of Permeable Obstacles on Density Current [Volume 33, Issue 9, 2020, Pages 1710-1720]
-
Esmaili, M.
A new Bi-objective model for a Two-echelon Capacitated Vehicle Routing Problem for Perishable Products with the Environmental Factor [Volume 30, Issue 4, 2017, Pages 523-531]
-
Esmaili, Parastoo
The Study of Deep Drawing of Brass-steel Laminated Sheet Composite Using Taguchi Method [Volume 29, Issue 1, 2016, Pages 103-108]
-
Esmaili, S.
Construction of Deformation - Mechanism Maps for Metals and Solid Solution Alloys a New Approach [Volume 3, Issue 1, 1990, Pages 31-36]
-
Esmaili, S.
Corrosion of Concrete in Sea Water (RESEARCH NOTE) [Volume 12, Issue 3, 1999, Pages 189-194]
-
Esmailian, M.
Prediction of Tool Force in Two Point Incremental Forming by Slab Analysis [Volume 33, Issue 11, 2020, Pages 2399-2407]
-
Esmaili Paeen Afrakoti, I.
Speech Emotion Recognition Using Scalogram Based Deep Structure [Volume 33, Issue 2, 2020, Pages 285-292]
-
Esmaily, J.
A Novel Intrusion Detection Systems based on Genetic Algorithms-suggested Features by the Means of Different Permutations of Labels’ Orders [Volume 30, Issue 10, 2017, Pages 1494-1502]
-
Esmailzadeh, E.
Experimental Investigation into the Hydrodynamics Effects of Slot Film Cooling on a Cylindrical Model [Volume 7, Issue 4, 1994, Pages 215-224]
-
Esmailzadeh, E.
Computer Simulation of Ammonia Cold Shot Converter [Volume 8, Issue 2, 1995, Pages 1-61]
-
Esmailzadeh, E.
Vibration Analysis of Beams Traversed by a Moving Mass [Volume 8, Issue 4, 1995, Pages 213-220]
-
Esmailzadeh, E.
Vibration of Road Vehicles with Non linear Suspensions [Volume 10, Issue 4, 1997, Pages 209-218]
-
Esparham, A.
Effect of Combined Different Sources of Alumina Silicate on Mechanical Properties and Carbonation Depth of Environmentally Friendly Geopolymeric Composite Based on Metakaolin [Volume 36, Issue 7, 2023, Pages 1383-1397]
-
Espitia, L. A.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Estajloo, M
Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran [Volume 31, Issue 8, 2018, Pages 1292-1301]
-
Esteki, S.
Optimization of the TMD Parameters to Suppress the Vertical Vibrations of Suspension Bridges Subjected to Earthquake Excitations [Volume 22, Issue 1, 2009, Pages 23-34]
-
Eswanto, E.
An Analysis on Performance of Pico-hydro with Archimedes Screw Model Viewed from Turbine Shaft Angle [Volume 36, Issue 1, 2023, Pages 10-18]
-
Eswar Kumar, A.
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Etemad, M.
An Experiment study concerning Natural convection frome a Horizontal Thin wire [Volume 3, Issue 3, 1990, Pages 154-162]
-
Etezad, M.
Failure Process of Stone Columns in Collapsible Soils [Volume 21, Issue 2, 2008, Pages 135-142]
-
Etghani, M. M.
Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
-
Ethiraj, N.
Effect of Tool Rotational Speed on the Tensile and Microstructural Properties of Friction Stir Welded Different Grades of Stainless Steel Joints [Volume 33, Issue 1, 2020, Pages 141-147]
-
Ethiraj, N.
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Ettehadi, M.
A New Procedure for Reactive Power Market Clearing Considering Distributed Energy Resources [Volume 32, Issue 8, 2019, Pages 1134-1143]
-
Evi, S.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Eweed, K. M.
Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
-
Eydi, Ali Reza
Modeling of the Capacitated Single Allocation Hub Location Problem with a Hierarchical Approch (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 573-586]
-
Ezaa, S. S.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Ezoji, M.
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Ezoji, M.
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Ezoji, M.
Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
-
Ezoji, Mehdi
A General Framework for 1-D Histogram-baesd Image Contrast Enhancement [Volume 29, Issue 10, 2016, Pages 1384-1391]
-
Ezoji, R.
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
-
Ezzatneshan, Eslam
Implementation of D3Q19 Lattice Boltzmann Method with a Curved Wall Boundary Condition for Simulation of Practical Flow Problems [Volume 30, Issue 9, 2017, Pages 1381-1390]
F
-
Fabregas Villegas, J.
A Coupled Rigid-viscoplastic Numerical Modeling for Evaluating Effects of Shoulder Geometry on Friction Stir-welded Aluminum Alloys [Volume 32, Issue 2, 2019, Pages 313-321]
-
Fadaee, M. J.
Diagnosis of Delaminated Composites Using Post-processed Strain Measurements under Impact Loading [Volume 32, Issue 1, 2019, Pages 54-61]
-
Fadaee, Mohammad
An Elasticity Solution for Static Analysis of Functionally Graded Curved Beam Subjected to a Shear Force [Volume 23, Issue 2, 2010, Pages 169-178]
-
FADAEE, MOHAMMAD JAVAD
Reliabilty-based Torsional Design of Reinforced Concrete Beams Strengthened with CFRP Laminate [Volume 26, Issue 10, 2013, Pages 1103-1110]
-
Fadaei, M
Cooperative Benefit and Cost Games under Fairness Concerns [Volume 31, Issue 8, 2018, Pages 1250-1257]
-
Fadaei, S.
Content-based Image Retrieval Speedup Based on Optimized Combination of Wavelet and Zernike Features Using Particle Swarm Optimization Algorithm [Volume 33, Issue 5, 2020, Pages 1000-1009]
-
Fadaei, S.
New Dominant Color Descriptor Features Based on Weighting of More Informative Pixels using Suitable Masks for Content-Based Image Retrieval [Volume 35, Issue 8, 2022, Pages 1457-1467]
-
Fadaei, S.
A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
-
Fadaei, S.
Image Restoration by Projection onto Convex Sets with Particle Swarm Parameter Optimization [Volume 36, Issue 2, 2023, Pages 398-407]
-
Fadaeian, T.
A Fast Processing Discontinuous Control Strategy for Vienna Rectifier [Volume 33, Issue 10, 2020, Pages 1959-1967]
-
Fadaei-Kermani, E.
Numerical Simulation of Seepage Flow through Dam Foundation Using Smooth Particle Hydrodynamics Method (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 484-488]
-
Fadavi Amiri, M.
Mapping Activity Diagram to Petri Net: Application of Markov Theory for Analyzing Non-Functional Parameters [Volume 20, Issue 1, 2007, Pages 65-76]
-
Fadhillah, I.
A Light Solution for Device Diversity Problem in a Wireless Local Area Network Fingerprint Indoor Positioning System [Volume 36, Issue 4, 2023, Pages 649-658]
-
Fadlil, A.
Mitigation from SQL Injection Attacks on Web Server using Open Web Application Security Project Framework [Volume 37, Issue 4, 2024, Pages 635-645]
-
Faez, A.
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Faghani, G.
Corrosion Behavior of TiN/CrN Nanoscale Multi-layered Coating in Ringer's Solution [Volume 33, Issue 2, 2020, Pages 329-336]
-
Faghidian, S. Ali
Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories [Volume 27, Issue 6, 2014, Pages 979-990]
-
Faghih, S. M.
Fabrication of Pebax/4A Zeolite Nanocomposite Membrane to Enhance CO2 Selectivity Compared to Pure O2, N2, and CH4 Gases [Volume 36, Issue 2, 2023, Pages 408-419]
-
Faghri, A.
Signal Design at lsolated lntersecaions Using Expert Systems Technology [Volume 8, Issue 4, 1995, Pages 181-190]
-
Fahimifar, A.
Proposals for a Failure Criterion Applicable to Discontinuous Rocks [Volume 7, Issue 3, 1994, Pages 125-132]
-
Fahimifar, A.
Deformational Characteristics of Rocks Containing a Single Discontinuity (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 241-248]
-
Fahrina, Afrillia
Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
-
Fahturizal, I. M.
Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
-
Faiz, J.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Faiz, Jawad.
Computer Aided Design for Single-Phase Induction Motors Based on a New Gemoetrical Approach [Volume 5, Issue 3, 1992, Pages 81-90]
-
Faiz, Jawad.
Moditication Factor for Sizing Equation of Electrical Machines-Single and Three Phase Induction Motors(RESEARCH NOTE) [Volume 7, Issue 3, 1994, Pages 181-184]
-
Faiz, Jawad.
A Design Package for Single Tooth per Stator Pole Switched Reluctance Motors [Volume 7, Issue 4, 1994, Pages 197-206]
-
Faiz, Jawad.
Simulation of a Variable Reluctance Steping Motor for Sinusoidal and Step Exitations [Volume 9, Issue 2, 1996, Pages 9-20]
-
Faiz, Jawad.
Analysis of Shaded Pole Induction Motors Considering Asymmetrical Flux Distribution and Saturation Effects [Volume 9, Issue 4, 1996, Pages 189-200]
-
Faiz, Jawad.
A Review of the Control Techniques for Brushless Direct Current Motors (REVIEW PAPER) [Volume 12, Issue 1, 1999, Pages 49-67]
-
Faiz, Jawad.
Influence of Operation Conditions Upon the Dynamic Steady State Performance of Switched Reluctance Motor [Volume 12, Issue 4, 1999, Pages 219-232]
-
Faiz, Jawad.
a Simple Speed Control Technique and Pulsating Torque Elimination Method in a Brushless Dc Motor [Volume 13, Issue 2, 2000, Pages 19-26]
-
Faiz, Jawad.
A Fast Method for Calculation of Transformers Leakage Reactance Using Energy Technique [Volume 16, Issue 1, 2003, Pages 41-48]
-
Faiz, Jawad.
Effect of Solid-State on Load Distribution Transformer Tap-Changer on Power Quality Enhancement [Volume 17, Issue 2, 2004, Pages 141-154]
-
Faiz, Jawad.
Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach [Volume 27, Issue 1, 2014, Pages 69-78]
-
Faiz, Jawad.
Design of a Three-phase Outer Rotor Synchronous Motor for Hybrid Vehicle [(Articles in Press)]
-
Faizal, M
The Effect of Air Fuel Ratio and Temperature on Syngas Composition and Calorific Value Produced from Downdraft Gasifier of Rubber Wood-Coal Mixture [Volume 31, Issue 9, 2018, Pages 1480-1486]
-
Faizatunnisa, Nuhaa
Synthesis of Fe3O4/SiO2/PEG Nanocomposite from Minerals Sands: Kinetic Adsorption Heavy Metal Ion from Aqueous Solution [(Articles in Press)]
-
Fakhari, M.M.
The Effect of Variable Properties on Rayleigh-Benard Convection in an Enclosure Filled with Al2O3-EG-Water Nanofluid [Volume 26, Issue 12, 2013, Pages 1411-1422]
-
Fakhari, Mojtaba
Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
-
Fakhari, Mojtaba
Size-dependent Vibration and Instability of Magneto-electro-elastic Nano-scale Pipes Containing an Internal Flow with Slip Boundary Condition [Volume 29, Issue 7, 2016, Pages 995-1004]
-
Fakharian, M. M.
A Wideband Fractal Planar Monopole Antenna with a Thin Slot on Radiating Stub for Radio Frequency Energy Harvesting Applications [Volume 33, Issue 11, 2020, Pages 2181-2187]
-
Fakharian, Mohammad Mehdi
Parametric Study of UC-PBG Structure in Terms of Simultaneous AMC and EBG Properties and its Applications in Proximity-coupled Fractal Patch Antenna [Volume 25, Issue 4, 2012, Pages 347-354]
-
Fakharian, Mohammad Mehdi
A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
-
Fakhimi, A. A.
Earthquake Induced Permanent Displacement of Slopes: a Numerical Study (TECHNICAL NOTE) [Volume 13, Issue 4, 2000, Pages 73-80]
-
Fakhraddini, A.
Seismic Behavior of Asymmetric Two-Story X-braced Frames [Volume 32, Issue 4, 2019, Pages 495-502]
-
Fakhraee, Hossein
Removal of Strontium Ions by Synthetic Nano Sodalite Zeolite from Aqueous Solution [Volume 29, Issue 2, 2016, Pages 160-169]
-
Fakhri, Behnam
Gypsum Dissolution Effects on the Performance of a Large Dam (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 143-150]
-
Fakhrzad, M.
Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
-
Fakhrzad, M. B.
Re-configuration of the Relief Network Considering Uncertain Demand and Link Failure in an Earthquake: A Multi-stage Stochastic Programming [Volume 31, Issue 6, 2018, Pages 932-942]
-
Fakhrzad, M. B.
Mathematical Formulation and Solving of Green Closed-loop Supply Chain Planning Problem with Production, Distribution and Transportation Reliability [Volume 31, Issue 12, 2018, Pages 2059-2067]
-
Fakhrzad, M. B.
A Multi-objective Sustainable Medicine Supply Chain Network Design Using a Novel Hybrid Multi-objective Metaheuristic Algorithm [Volume 33, Issue 10, 2020, Pages 1986-1995]
-
Fakhrzad, M. B.
A Closed-loop Supply Chain Network Design Problem in Copper Industry [Volume 33, Issue 10, 2020, Pages 2008-2015]
-
Fakhrzad, M.B.
Determining an Economically Optimal (N,C) Design via Using Loss Functions [Volume 25, Issue 3, 2012, Pages 197-202]
-
Fakhrzad, M.B.
A New Multi-objective Job Shop Scheduling with Setup Times Using a Hybrid Genetic Algorithm [Volume 26, Issue 2, 2013, Pages 207-218]
-
Fakhrzad, M.B.
Modeling the Time Windows Vehicle Routing Problem in Cross-Docking Strategy Using Two Meta-Heuristic Algorithms [Volume 27, Issue 7, 2014, Pages 1113-1126]
-
Fakhrzad, M.B.
Outsourcing through Three-dimensional Competition [Volume 27, Issue 12, 2014, Pages 1863-1871]
-
Fakhrzad, M.B.
A Robust Two-stage Data Envelopment Analysis Model for Measuring Efficiency: Considering Iranian Electricity Power Production and Distribution Processes [Volume 29, Issue 5, 2016, Pages 646-653]
-
Fakhrzad, M.B.
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Falaghi, H.
Risk-Based AC/DC Hybrid Distribution System Planning [Volume 37, Issue 5, 2024, Pages 876-886]
-
Falk, Robert H.
Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites [Volume 17, Issue 1, 2004, Pages 95-104]
-
Fallah, A. A.
A Method for Automatic Lane Detection using a Deep Network [Volume 35, Issue 4, 2022, Pages 802-809]
-
Fallah, H.
Minimizing the Mean Tardiness in A N1 Sequencing Problem [Volume 3, Issue 3, 1990, Pages 90-97]
-
Fallah, M.
an Efficient Drive Circuit for Switched Reluctance Motor [Volume 12, Issue 3, 1999, Pages 137-143]
-
Fallah, M.
A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
-
Fallah, M.
A Green Competitive Vehicle Routing Problem under Uncertainty Solved by an Improved Differential Evolution Algorithm [Volume 32, Issue 7, 2019, Pages 976-981]
-
Fallah, M.
Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
-
Fallah, M.
Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
-
Fallah, Mohammad
A Novel Low Voltage, Low Power and High Gain Operational Amplifier Using Negative Resistance and Self Cascode Transistors [Volume 26, Issue 3, 2013, Pages 303-308]
-
Fallah, N.
A development in the finite volume method for the crack growth analysis without global remeshing [Volume 29, Issue 7, 2016, Pages 898-908]
-
Fallah, N.
Experimental Investigation of the Effects of using Waste Rubber Ash on Mechanical Properties of Plain Concrete [Volume 36, Issue 3, 2023, Pages 450-456]
-
Fallah, N.
Seismic Vulnerability Assessment of Existing RC Moment Frames using a New Stiffness Based Damage Index [Volume 36, Issue 5, 2023, Pages 1000-1011]
-
Fallah, N.
A New Approach for Seismic Damage Detection Based on Results of Pushover Analysis and Modal Based Damage Index [Volume 36, Issue 10, 2023, Pages 1892-1907]
-
Fallahi, A.
A Multi-product Humanitarian Supply Chain Network Design Problem: A Fuzzy Multi-objective and Robust Optimization Approach [Volume 37, Issue 5, 2024, Pages 941-958]
-
Fallahian, Mohammd
Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
-
Fallahnezhad, M.
Modelling and Decision-making on Deteriorating Production Systems using Stochastic Dynamic Programming Approach [Volume 31, Issue 12, 2018, Pages 2052-2058]
-
Fallahnezhad, M. S
Application of Multivariate Control Charts for Condition Based Maintenance [Volume 31, Issue 4, 2018, Pages 597-604]
-
Fallahnezhad, M. S
Economic-statistical Design of NP Control Chart with Variable Sample Size and Sampling Interval [Volume 31, Issue 4, 2018, Pages 629-639]
-
Fallah Nezhad, Mohammad Saber
A New Acceptance Sampling Design Using Bayesian Modeling and Backwards Induction [Volume 25, Issue 1, 2012, Pages 45-54]
-
Fallah Nezhad, Mohammad Saber
Determining an Economically Optimal (N,C) Design via Using Loss Functions [Volume 25, Issue 3, 2012, Pages 197-202]
-
Fallah Nezhad, Mohammad Saber
Designing different Sampling Plans Based on Process Capability Index [Volume 29, Issue 8, 2016, Pages 1120-1130]
-
Fallah Nezhad, Mohammad Saber
The Reliable Hierarchical Location-allocation Model under Heterogeneous Probabilistic Disruptions [Volume 29, Issue 10, 2016, Pages 1401-1411]
-
Fallah Nezhad, Mohammad Saber
Design of a Reliable Facility Location Model for Health Service Networks [Volume 30, Issue 1, 2017, Pages 75-84]
-
Fallah Nezhad, Mohammad Saber
Determining the Sample size for Estimation of the CCC-R Control Chart Parameters Based on Estimation Costs [Volume 30, Issue 2, 2017, Pages 253-260]
-
Fallah Nezhad, M. S.
A POMDP Framework to Find Optimal Inspection and Maintenance Policies via Availability and Profit Maximization for Manufacturing Systems [Volume 31, Issue 12, 2018, Pages 2077-2084]
-
FallahNezhad, M. S.
Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
-
Fallah-tafti, Alireza
A Comprehensive Mathematical Model for a Location-routing-inventory Problem under Uncertain Demand: a Numerical Illustration in Cash-in-transit Sector [Volume 32, Issue 11, 2019, Pages 1634-1642]
-
Fallahzadeh, S. A. A
Nonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System [Volume 33, Issue 2, 2020, Pages 237-247]
-
Falsafi, P.
Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
-
Famil Khalili, GholamHassan
Control of Multivariable Systems Based on Emotional Temporal Difference Learning Controller [Volume 17, Issue 4, 2004, Pages 363-376]
-
Fang, L.
A Fault Diagnosis Method for Automaton Based on Morphological Component Analysis and Ensemble Empirical Mode Decomposition [Volume 32, Issue 6, 2019, Pages 877-883]
-
Fang, L.
A Fault Diagnosis Method for Automaton based on Morphological Component Analysis and Ensemble Empirical Mode Decomposition [Volume 32, Issue 7, 2019, Pages 1010-1016]
-
Fang, Z.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Fantidis, J. G.
The Comparison of Neutron Beams through 7Li(p,n) Reactions for the Design of a Thermal Neutron Radiography Facility using the MCNPX Code [Volume 33, Issue 11, 2020, Pages 2209-2214]
-
Farahani, S.
Map-merging in Multi-robot Simultaneous Localization and Mapping Process Using Two Heterogeneous Ground Robots [Volume 32, Issue 4, 2019, Pages 608-616]
-
Farahani, S. D.
Effect of Porous Medium Positioning on Heat Transfer of Micro-channel with Jet [Volume 33, Issue 10, 2020, Pages 2057-2064]
-
Farahani, Sina
Seismic Behavior of Direct Displacement-based Designed Eccentrically Braced Frames [Volume 29, Issue 6, 2016, Pages 752-761]
-
Farahat, S.
Sensitivity Analysis of Parameter Hanges in Nonlinear Hydraulic Control Systems (RESEARCH NOTE) [Volume 18, Issue 3, 2005, Pages 239-252]
-
Farahi, A
Composite Multi Wall Carbon Nano Tube Polydimethylsiloxane Membrane Bioreactor for Enhanced Bioethanol Production from Broomcorn Seeds [Volume 31, Issue 4, 2018, Pages 516-523]
-
Farahmand Azar, Bahman
Experimental Investigation on Cyclic Behavior of Butterfly-shaped Links Steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1559-1569]
-
Faraji, A.
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Faraji, A.
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Faraji, A.
Effect of Al59Cu25.5Fe12.5B3 Quasi-crystals on Microstructure and Flexural Strength of Aluminum Matrix Composites Prepared by Spark Plasma Sintering Method [Volume 37, Issue 1, 2024, Pages 48-55]
-
Faraji, N.
An Efficient Target Tracking Algorithm Based on Particle Filter and Genetic Algorithm [Volume 32, Issue 7, 2019, Pages 915-923]
-
Faraji, Zahra
Modeling and Simulation of Modern Industrial Screens using Discrete Element Method (TECHNICAL NOTE) [Volume 26, Issue 8, 2013, Pages 927-932]
-
Faraji-Dana, Reza
Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
-
Faraji Dizaji, Farzad
An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
-
Farash Bamoharram, F.
Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
-
Farbiz, F.
A New Iterative Fuzzy-Based Method for Image Enhancement (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 69-74]
-
Fard, Nasser
Bayes Interval Estimation on the Parameters of the Weibull Distribution for Complete and Censored Tests [Volume 26, Issue 9, 2013, Pages 985-996]
-
Farhadi, Asghar
Investigating the Third Order Solitary Wave Generation Accuracy using Incompressible Smoothed Particle Hydrodynamics [Volume 29, Issue 3, 2016, Pages 426-435]
-
Farhadi, M.
Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
-
Farhadi, M.
An Efficient Secret Sharing-based Storage System for Cloud-based Internet of Things [Volume 32, Issue 8, 2019, Pages 1117-1125]
-
Farhadi, M.
Numerical Simulation of Hydrodynamic Properties of Alex Type Gliders [Volume 33, Issue 7, 2020, Pages 1387-1396]
-
Farhadi, Mousa
Nusselt Number Estimation along a Wavy Wall in an Inclined Lid-driven Cavity using Adaptive Neuro-Fuzzy Inference System (ANFIS) [Volume 26, Issue 4, 2013, Pages 383-392]
-
Farhadi, Mousa
Experimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter [Volume 29, Issue 9, 2016, Pages 1292-1299]
-
Farhadi, Mousa
A passive approach to cooling photovoltaic devices by utilizing pin fins [(Articles in Press)]
-
Farhadi, N
Evaluation of Seismic Behavior of Steel Moment Resisting Frames Considering Nonlinear Soil-structure Interaction [Volume 31, Issue 7, 2018, Pages 1020-1027]
-
Farhang-Boroujeny, B.
A Microcomputer-Based Simulator for Digital Control Systems [Volume 1, Issue 2, 1988, Pages 85-96]
-
Farhani, F.
Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
-
Farhanieh, B.
Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
-
Farhanieh, B.
A 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade- Length Approach in an Axial Compressor [Volume 16, Issue 1, 2003, Pages 81-90]
-
Farhanieh, B.
Development of a Moving Finite Element-Based Inverse Heat Conduction Method for Determination of Moving Surface Temperature [Volume 17, Issue 3, 2004, Pages 281-292]
-
Farhanieh, B.
Measurement of Heat Characteristics of a New Incubator with a Chemical Energy Source [Volume 17, Issue 4, 2004, Pages 319-328]
-
Farhanieh, B.
Numerical Simulation of Non-Uniform Gas Diffusion Layer Porosity Effect on Polymer Electrolyte Membrane Fuel Cell Performance [Volume 20, Issue 2, 2007, Pages 179-192]
-
Farhoodi, G.
Contamination of the Konar Siah Karst Spring by Saltdom [Volume 9, Issue 1, 1996, Pages 37-44]
-
Farhoodi, M.
A Proposed Model for Persian Stance Detection on Social Media [Volume 36, Issue 6, 2023, Pages 1048-1059]
-
Fariba, F.
A New Technique based on Strain Energy for Correction of Stress-strain Curve [Volume 27, Issue 8, 2014, Pages 1287-1296]
-
Farid, Z.
A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
-
Farievar, S.
The Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement [Volume 20, Issue 1, 2007, Pages 83-94]
-
Farjami, Y.
Rescheduling Unreliable Service Providers in a Dynamic Multi-objective Cloud Manufacturing [Volume 36, Issue 7, 2023, Pages 1310-1321]
-
Farmanzadeh, D.
Solubility of Hydrogen Sulfid and Sulfur Dioxide in Triethylen Glycol, Tetra Ethylene Clycol and Diethanol (TECHNICAL NOTE). AMINE SOLUTION [Volume 10, Issue 2, 1997, Pages 103-110]
-
Farnood Ahmadi, P
A Prioritization Model for HSE Risk Assessment Using Combined Failure Mode, Effect Analysis, and Fuzzy Inference System: A Case Study in Iranian Construction Industry [Volume 31, Issue 9, 2018, Pages 1487-1497]
-
Farobie, O.
Catalytic Upgrading of Bio-oil from Ulva lactuca using Amberlyst-15 Catalyst: Experimental and Kinetic Model [Volume 36, Issue 9, 2023, Pages 1677-1685]
-
Farokhi, B.
A New Approach to Provide High Water Permeable Polyethersulfone based Nanofiltration Membrane by Air Plasma Treatment [Volume 32, Issue 3, 2019, Pages 354-359]
-
Farrahi, G. H
Modelling of Conventional and Severe Shot Peening Influence on Properties of High Carbon Steel via Artificial Neural Network [Volume 31, Issue 2, 2018, Pages 382-393]
-
Farrahi, G. H
A Study on the Contact Ellipse and the Contact Pressure During the Wheel Wear through Passing the Tracks including Several Sharp Curves [Volume 31, Issue 5, 2018, Pages 826-833]
-
Farrahi, G. H.
Surface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis [Volume 8, Issue 3, 1995, Pages 159-168]
-
Farrahi, G. H.
The Dc Electrical Potential Method for the Measumment of Fretting Cracks [Volume 9, Issue 1, 1996, Pages 19-28]
-
Farrahi, G. H.
Dynamic and Quasi-Static Tensile Properties of Structural S400 Steel [Volume 13, Issue 1, 2000, Pages 51-60]
-
Farrahi, G. H.
Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
-
Farrahi, G. H.
Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions [Volume 15, Issue 3, 2002, Pages 287-292]
-
Farrahi, G. H.
Efficiency of Anti-Hourglassing Approaches in Finite Element Method (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 79-88]
-
Farrahi, G. H.
Thermal Analysis of Laser Hardening for Different Moving Patterns [Volume 22, Issue 2, 2009, Pages 169-180]
-
Farrahi, G. H.
NUMERICAL INVESTIGATION OF CRACK ORIENTATION IN THE FRETTING FATIGUE OF A FLAT ROUNDED CONTACT [Volume 23, Issue 3, 2010, Pages 223-232]
-
Farrahi, G. H.
Side Effects of Shot Peening on Fatigue Crack Initiation Life [Volume 24, Issue 3, 2011, Pages 275-280]
-
Farrahi, G. H.
Fatigue Life of Repaired Welded Tubular Joints [Volume 26, Issue 1, 2013, Pages 25-32]
-
Farrahi, G. H.
The Effect of Various Parameters on Out-of-phase Thermo-mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy [Volume 26, Issue 12, 2013, Pages 1461-1470]
-
Farrahi, G. H.
Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories [Volume 27, Issue 6, 2014, Pages 979-990]
-
Farrahi, G. H.
Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
-
Farrahi, G. H.
Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers [Volume 32, Issue 1, 2019, Pages 112-120]
-
Farrahi, G. H.
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
-
Farrahi, G. Hossein
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation [Volume 33, Issue 1, 2020, Pages 148-157]
-
Farrokh, F.
Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
-
Farrokhi, H.
Joint Sensing Times Detection Thresholds and Users Association Optimization in Multi-Channel Multi-Antenna Cognitive Radio Networks [Volume 36, Issue 9, 2023, Pages 1704-1719]
-
Farrokhi, M.
Textural and Structural Characterizations of Mesoporous Chitosan Beads for Immobilization of Alpha-Amylase: Diffusivity and Sustainability of Biocatalyst [Volume 32, Issue 2, 2019, Pages 207-216]
-
Farshad, M.
Earthquake Analysis of Spatial Rod Systems [Volume 3, Issue 3, 1990, Pages 134-147]
-
Farshidi, Ebrahim
A New Approach for Low Voltage CMOS based on Current-controlled Conveyors [Volume 27, Issue 5, 2014, Pages 723-730]
-
Farshidi, Ebrahim
Analysis of Integral Nonlinearity in Radix-4 Pipelined Analog-to-Digital Converters [Volume 28, Issue 4, 2015, Pages 546-552]
-
Farsi, E
Simultaneous Pricing, Routing, and Inventory Control for Perishable Goods in a Two-echelon Supply Chain [Volume 31, Issue 7, 2018, Pages 1074-1081]
-
Farsi, H
Optimum Ensemble Classification for Fully Polarimetric SAR Data Using Global-Local Classification Approach [Volume 31, Issue 2, 2018, Pages 331-338]
-
Farsi, H.
A Modified Grasshopper Optimization Algorithm Combined with CNN for Content Based Image Retrieval [Volume 32, Issue 7, 2019, Pages 924-930]
-
Farsi, H.
Estimation of Hand Skeletal Postures by Using Deep Convolutional Neural Networks [Volume 33, Issue 4, 2020, Pages 552-559]
-
Farsi, H.
Image Edge Detection with Fuzzy Ant Colony Optimization Algorithm [Volume 33, Issue 12, 2020, Pages 2464-2470]
-
Farsi, H.
Segmenting the Lesion Area of Brain Tumor using Convolutional Neural Networks and Fuzzy K-Means Clustering [Volume 36, Issue 8, 2023, Pages 1556-1568]
-
Farsi, H.
Deep Multi-task Convolutional Neural Networks for Efficient Classification of Face Attributes [Volume 36, Issue 11, 2023, Pages 2102-2111]
-
Farsi, H.
Semantic Segmentation of Aerial Imagery: A Novel Approach Leveraging Hierarchical Multi-scale Features and Channel-based Attention for Drone Applications [Volume 37, Issue 5, 2024, Pages 1022-1035]
-
Farsi, M. A.
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Farsi, M. A.
Modeling and Analyzing Supporting Systems for Smart Manufacturing Systems with Stochastic, Technical and Economic Dependences [Volume 33, Issue 11, 2020, Pages 2310-2318]
-
Farughi, H
Project Scheduling with Simultaneous Optimization, Time, Net Present Value, and Project Flexibility for Multimode Activities with Constrained Renewable Resources [Volume 31, Issue 5, 2018, Pages 780-791]
-
Farughi, H.
Sustainable Surface Water Management and Wastewater Treatment Plant Location: A Case Study of Urmia Lake [Volume 33, Issue 4, 2020, Pages 621-630]
-
Farughi, H.
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Farughi, H.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Farughi, H.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Farughi, H.
Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
-
Farughi, H.
Data Consumption Analysis by Two Ordinal Multivariate Control Charts [Volume 35, Issue 11, 2022, Pages 2196-2204]
-
Farughi, Hiwa
A Non-linear Integer Bi-level Programming Model for Competitive Facility Location of Distribution Centers [Volume 29, Issue 8, 2016, Pages 1131-1140]
-
Farvizi, M.
Microstructure and Corrosion Behavior of Al-Cu-Fe Quasi-crystalline Coated Ti-6Al-4V Alloy [Volume 36, Issue 10, 2023, Pages 1880-1891]
-
Farzad, A.
Effect of Die Profile on Mechanical Properties of Product in Extrusion of Rods [Volume 15, Issue 4, 2002, Pages 365-372]
-
Farzalipour Tabriz, M.
Particles Size Distribution Effect on 3d Packing of Nanoparticles Into a Bounded Region [Volume 20, Issue 3, 2007, Pages 281-291]
-
Farzalipour Tabriz, M.
Log-Normal and Mono-Sized Particles’ Packing into a Bounded Region [Volume 22, Issue 1, 2009, Pages 57-62]
-
Farzalipour Tabriz, M.
Effects of the pH of Initial Solution on Hydrothermally Synthesized TiO2 Nanoparticles [Volume 25, Issue 2, 2012, Pages 131-136]
-
Farzalipour Tabriz, M.
Wall Effect in 3D Simulation Of Same Sized Particles Packing [Volume 25, Issue 2, 2012, Pages 137-142]
-
Farzam-Alipour, S.
Effect of Blade Design Parameters on Air Flow through an Axial Fan [Volume 30, Issue 10, 2017, Pages 1583-1591]
-
Farzanegan, Akbar
Simulation and Genetic Algorithms for Optimizing Comminution Circuit at Gol-e-Gohar Iron Plant (RESEARCH NOTE) [Volume 26, Issue 6, 2013, Pages 663-670]
-
Farzanegan, Akbar
Modeling and Simulation of Modern Industrial Screens using Discrete Element Method (TECHNICAL NOTE) [Volume 26, Issue 8, 2013, Pages 927-932]
-
Farzi, S.
An Ensemble Click Model for Web Document Ranking [Volume 33, Issue 7, 2020, Pages 1208-1213]
-
Farzin, M.
Prediction of Instability in Planar Anisotropic Sheet Metal Forming Processes [Volume 14, Issue 1, 2001, Pages 69-80]
-
Farzinfar, M.
Determination of Optimal Allocation and Penetration Level of Distributed Energy Resources Considering Short Circuit Currents [Volume 33, Issue 3, 2020, Pages 427-438]
-
Farzinfar, M.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Farzinfar, Mehdi
A New Adaptive Load-Shedding and Restoration Strategy for Autonomous Operation of Microgrids: A Real-Time Study [Volume 33, Issue 1, 2020, Pages 82-91]
-
Fasihi, Javad
Adsorptive Behavior of an Amberlite Anion Exchanger Resin for Uranium (VI) Sorption in the Presence of Sulfate Anions [Volume 29, Issue 2, 2016, Pages 170-175]
-
Fasihi, Javad
Uranium Ions Removal Using Amberlite CG-400 Anion Exchanger Resin in the Presence of Sulfate Anions [Volume 29, Issue 6, 2016, Pages 728-734]
-
Fasihi, M.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Fatahi, F.
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Fatahi, Mohsen
Employing Sensor Network to Guide Firefighters in Dangerous Area [Volume 23, Issue 2, 2010, Pages 191-202]
-
Fatahi, Mohsen
Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
-
Fatahian, E.
Numerical Investigation of Hazardous Gas Dispersion Over Obstacles and Residential Areas [Volume 33, Issue 10, 2020, Pages 2087-2094]
-
Fatahian, H.
Numerical Investigation of Hazardous Gas Dispersion Over Obstacles and Residential Areas [Volume 33, Issue 10, 2020, Pages 2087-2094]
-
Fateh, H.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Fateh, Mansoor
DABT-U-Net: Dual Attentive BConvLSTM U-Net with Transformers and Collaborative Patch-based Approach for Accurate Retinal Vessel Segmentation [(Articles in Press)]
-
Fateh, M. M.
Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors [Volume 30, Issue 4, 2017, Pages 507-515]
-
Fateh, M. M.
Designing a Robust Control Scheme for Robotic Systems with an Adaptive Observer [Volume 32, Issue 2, 2019, Pages 270-276]
-
Fatehi-Dindarlou, M. H.
A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
-
Fatehi Kivi, Amir
Three Meta-heuristic Algorithms for the Single-item Capacitated Lot-sizing Problem (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1223-1232]
-
Fatehi-Kivi, Amir
A New Mathematical Model for a Multi-product Supply Chain Network with a Preventive Maintenance Policy [Volume 32, Issue 10, 2019, Pages 1446-1453]
-
Fatemi, Mohammad Hosein
Identification of Volatile Organic Compounds from Trichoderma virens (6011) by GC-MS and Separation of a Bioactive Compound via Nanotechnology [Volume 29, Issue 10, 2016, Pages 1347-1353]
-
Fatemi Ardestani, S. F.
A Hybrid Approach to Detect Researchers’ Communities Based on Deep Learning and Game Theory [Volume 36, Issue 11, 2023, Pages 2052-2062]
-
Fatemi Ghomi, S. M. T.
Combination of Approximation and Simulation Approaches for Distribution Functions in Stochastic Networks [Volume 12, Issue 3, 1999, Pages 145-154]
-
Fatemi Ghomi, S. M. T.
A New Approach to Approximate Completion Time Distribution Function of Stochastic Pert Networks [Volume 15, Issue 1, 2002, Pages 53-62]
-
Fatemi Ghomi, S. M. T.
The Finite Horizon Economic Lot Scheduling in Flexible Flow Lines [Volume 18, Issue 3, 2005, Pages 273-284]
-
Fatemi Ghomi, S. M. T.
Multi-Objective Lead Time Control in Multistage Assembly Systems (TECHNICAL NOTE) [Volume 18, Issue 4, 2005, Pages 359-370]
-
Fatemi Ghomi, S. M. T.
Finite Horizon Economic Lot and Delivery Scheduling Problem: Flexible Flow Lines with Unrelated Parallel Machines and Sequence Dependent Setups [Volume 21, Issue 2, 2008, Pages 143-158]
-
Fatemi Ghomi, S. M. T.
Integrated Dynamic Cellular Manufacturing Systems and Hierarchical Production Planning with Worker Assignment and Stochastic Demand [Volume 36, Issue 2, 2023, Pages 348-359]
-
Fath Abadi, A. M.
Application of SVC on Large Synchronous Motors Based on LOC Design (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 235-246]
-
Fathaddin, Muhammad
Lattice Gas Automata Simulation of Adsorption Process of Polymer in Porous Media [Volume 17, Issue 4, 2004, Pages 329-338]
-
Fathalilou, M.
Generating and Focusing the Ultrasound Waves Using Elastomer-based Capacitive Micro-Speakers [Volume 33, Issue 2, 2020, Pages 320-328]
-
Fathalilou, Mohammad
Couple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor [Volume 29, Issue 6, 2016, Pages 852-861]
-
Fathi, A.
Evaluation of Forming Severity and Thickness Variation in Deep Drawing Process [Volume 16, Issue 2, 2003, Pages 171-182]
-
Fathi, A.
Experimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator [Volume 32, Issue 1, 2019, Pages 71-77]
-
Fathi, A. R.
Investigation of the Damping Performance of a Shape Memory Alloy Beam [Volume 36, Issue 7, 2023, Pages 1369-1382]
-
Fathi Kalajahi, J.
Mathematical Model for Separation of Submicron Particles from Gas Stream in a Conduit Type Scrubber (RESEARCH NOTE). [Volume 3, Issue 1, 1990, Pages 73-75]
-
Fathi Kalajahi, J.
Computer Simulation of Ammonia Cold Shot Converter [Volume 8, Issue 2, 1995, Pages 1-61]
-
Fathinejad, H.
Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
-
Fathollah Bayati, Mohsen
Two-tier Supplier Base Efficiency Evaluation Via Network DEA: A Game Theory Approach [Volume 29, Issue 7, 2016, Pages 931-939]
-
Fathollahi, A.
Soft Soil Seismic Design Spectra Including Soil-structure Interaction [Volume 30, Issue 10, 2017, Pages 1443-1450]
-
Fathollahi-Fard, A. M.
New Approaches in Metaheuristics to Solve the Truck Scheduling Problem in a Cross-docking Center [Volume 31, Issue 8, 2018, Pages 1258-1266]
-
Fathollahi-Fard, A. M.
A Collaborative Stochastic Closed-loop Supply Chain Network Design for Tire Industry [Volume 31, Issue 10, 2018, Pages 1715-1722]
-
Fathollahi-Fard, A. M.
A Lagrangian Relaxation-based Algorithm to Solve a Home Health Care Routing Problem [Volume 31, Issue 10, 2018, Pages 1734-1740]
-
Fathollahi-Fard, Amir Mohammad
Addressing a Coordinated Quay Crane Scheduling and Assignment Problem by Red Deer Algorithm [Volume 32, Issue 8, 2019, Pages 1186-1191]
-
Fathollahi-Fard, Amir Mohammad
A Novel Hybrid Whale Optimization Algorithm to Solve a Production-Distribution Network Problem Considering Carbon Emissions [Volume 32, Issue 12, 2019, Pages 1781-1789]
-
Fathy, Adel
Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
-
Fatourechi, Mehrdad
Control of Multivariable Systems Based on Emotional Temporal Difference Learning Controller [Volume 17, Issue 4, 2004, Pages 363-376]
-
Fatriasari, W.
Catalytic Upgrading of Bio-oil from Ulva lactuca using Amberlyst-15 Catalyst: Experimental and Kinetic Model [Volume 36, Issue 9, 2023, Pages 1677-1685]
-
Fattah, A.
Forward Position Kinematics of a Parallel Manipulator with New Architecture [Volume 14, Issue 3, 2001, Pages 239-246]
-
Fattah, A.
Design and Simulation of a Novel Hetero-junction Bipolar Transistor with Gate-Controlled Current Gain [Volume 36, Issue 3, 2023, Pages 433-440]
-
Fattah, M. Y.
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Fattah, Mohammed
Boundary Element Analysis of a Lined Tunnel Problem [Volume 25, Issue 2, 2012, Pages 89-98]
-
Fattah, M. Y.
Assessment of Changes in Shear Strength Parameters for Soils below Circular Machine Foundation [Volume 33, Issue 8, 2020, Pages 1491-1498]
-
Fattah, M. Y.
Collapse Problem Treatment of Gypseous Soil by Nanomaterials [Volume 33, Issue 9, 2020, Pages 1737-1742]
-
Fattah, M. Y.
Vertical and Lateral Displacement Response of Foundation to Earthquake Loading [Volume 33, Issue 10, 2020, Pages 1864-1871]
-
Fattah, M. Y.
Effect of Carbonation on the Collapse Potential of Magnesium Oxide Treated Gypseous Soil [Volume 35, Issue 4, 2022, Pages 706-714]
-
Fattahi, Ehsan
EFFECT OF WAVY WALL ON CONVECTION HEAT TRANSFER OF WATER-AL2O3 NANOFLUID IN A LID-DRIVEN CAVITY USING LATTICE BOLTZMANN METHOD [Volume 25, Issue 2, 2012, Pages 165-176]
-
Fattahi, Ehsan
Dispersion and Deposition of Micro Particles over Two Square Obstacles in a Channel via Hybrid Lattice Boltzmann Method and Discrete Phase model [Volume 25, Issue 3, 2012, Pages 257-266]
-
Fattahi, Moslem
Preparation, Physiochemical and Kinetic Investigations of V2O5/SiO2 Catalyst for the Sulfuric Acid Production [Volume 29, Issue 11, 2016, Pages 1478-1488]
-
Fattahi, P.
Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
-
Fattahi, Parviz
Bi-objectives Approach for a Multi-period Two Echelons Perishable Product Inventory-routing Problem with Production and Lateral Transshipment [Volume 30, Issue 6, 2017, Pages 876-886]
-
Fattahzadeh, M. A.
A Statistical Method for Sequential Images–based Process Monitoring [Volume 33, Issue 7, 2020, Pages 1285-1292]
-
Fatthi, P.
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Faulgaber, A. N.
The Object Detection Efficiency in Synthetic Aperture Radar Systems [Volume 33, Issue 2, 2020, Pages 337-343]
-
Faulgaber, A. N.
Digital Root-mean-square Signal Meter [Volume 33, Issue 11, 2020, Pages 2201-2208]
-
Fazeli, H.
Numerical and Experimental Investigation of Motor Pressure Effect on Thermochemical Erosion of Graphite Nozzle in Solid Fuel Engines [Volume 32, Issue 11, 2019, Pages 1656-1664]
-
Fazeli, M. M.
Rescheduling Unreliable Service Providers in a Dynamic Multi-objective Cloud Manufacturing [Volume 36, Issue 7, 2023, Pages 1310-1321]
-
Fazelpour, Mohammad
Effect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat [Volume 21, Issue 4, 2008, Pages 401-408]
-
Fazlali, A.
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Fazlali, A. R.
Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
-
Fazlali, A. R.
Optimization of Control System of Petroleum Refinery Isomerization Unit by Plant-Wide Control Principles [Volume 32, Issue 7, 2019, Pages 901-907]
-
Fazli, M
Position Control Improvement of Permanent Magnet Motor Using Model Predictive Control [Volume 31, Issue 7, 2018, Pages 1044-1049]
-
Fazli, Masoud
Addressing a Coordinated Quay Crane Scheduling and Assignment Problem by Red Deer Algorithm [Volume 32, Issue 8, 2019, Pages 1186-1191]
-
Fazli-Khalaf, M
A Robust Reliable Closed Loop Supply Chain Network Design under Uncertainty: A Case Study in Equipment Training Centers [Volume 31, Issue 4, 2018, Pages 648-658]
-
Fazli-Khalaf, M.
A Robust Reliable Forward-reverse Supply Chain Network Design Model under Parameter and Disruption Uncertainties [Volume 30, Issue 8, 2017, Pages 1160-1169]
-
Fazlollahtabar, H.
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Fazlollahtabar, H.
Redesigning and Re-planning of Location, Pricing, Inventory and Marketing Decisions in a Multi-channel Distribution Network: A Case Study [Volume 36, Issue 2, 2023, Pages 420-432]
-
Fazlollahtabar, Hamed
An Interactive Allocation for Depot-Customer-Depot in a Multi Aspect Supply Chain Network [Volume 24, Issue 4, 2011, Pages 367-376]
-
Febrian, R.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Fei Li, X.
Comparative Analysis of Two Seismic Response Analysis Programs in the Actual Soft Field [Volume 33, Issue 5, 2020, Pages 784-790]
-
Feizbahr, M
Wave Energy Dissipation Using Perforated and Non Perforated Piles [Volume 31, Issue 2, 2018, Pages 212-219]
-
Feizi, A.
Convolutional Gating Network for Object Tracking [Volume 32, Issue 7, 2019, Pages 931-939]
-
Feizi, Asghar
Application of Combined Local Object Based Features and Cluster Fusion for the Behaviors Recognition and Detection of Abnormal Behaviors [Volume 28, Issue 11, 2015, Pages 1597-1604]
-
Fekari, A.
Experimental Study of Management Systems for Emission Reduction in Ignition Engines [Volume 33, Issue 7, 2020, Pages 1347-1353]
-
Fekri, H.
Performance Analysis of a Novel Three-phase Axial Flux Switching Permanent Magnet Generator with Overlapping Concentrated Winding [Volume 32, Issue 2, 2019, Pages 286-295]
-
Feng, Liangang
Comparative Analysis of Image Denoising Methods Based on Wavelet Transform and Threshold Functions [Volume 30, Issue 2, 2017, Pages 199-206]
-
Feng, Wei
An Investigation on Two Types of Crystalline Micro-diamond Film Coated Tools Lapping with Sapphire Wafer [Volume 28, Issue 12, 2015, Pages 1790-1795]
-
Fenjan, Salma Ajeel
Flow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend [Volume 29, Issue 1, 2016, Pages 14-22]
-
Feoktystova, O.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Ferdows Farahani, F.
Efficiency of Anti-Hourglassing Approaches in Finite Element Method (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 79-88]
-
Ferdowsi, B.
Evaluating the Semi-Circular Bending Test for HMA Mixtures [Volume 22, Issue 1, 2009, Pages 47-58]
-
Fereidoon, A.H.
Analytic Approach to Investigation of Fluctuation and Frequency of the Oscillators with Odd and Even Nonlinearities [Volume 23, Issue 1, 2010, Pages 41-56]
-
Fereidooni, Jalil
Heat Recirculation Effect on the Structure of Wood Dust Flame Propagation [Volume 25, Issue 2, 2012, Pages 143-150]
-
Fereidunian, A.
Chaotic Time Series Recognition: A Deep Learning Model Inspired by Complex Systems Characteristics [Volume 36, Issue 1, 2023, Pages 1-9]
-
Fereidunian, Alireza
Distribution Systems Reconfiguration Using Pattern Recognizer Neural Networks [Volume 15, Issue 2, 2002, Pages 135-144]
-
Fereshteh-Saniee, N.
Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
-
Fereydouni, Abed
Proposed Relationship to Design the Waffle Floor under Harmonic Vertical Loading [Volume 26, Issue 10, 2013, Pages 1111-1118]
-
Fereydouni, A. R.
Channel Estimation and Carrier Frequency Offset Compensation in Orthogonal Frequency Division Multiplexing System Using Adaptive Filters in Wavelet Transform Domain [Volume 33, Issue 7, 2020, Pages 1231-1239]
-
Fergani, O.
A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
-
FERGANI, OKBA
Optimizing DC Microgrid Systems for Efficient Electric Vehicle Battery Charging in Ain El Ibel, Algeria [(Articles in Press)]
-
Feroz, C. Md.
Two Phase Heat Transfer Characteristics in a Vertical Small Diameter Tube at Sub Atmospheric Pressure [Volume 14, Issue 4, 2001, Pages 377-384]
-
Feyzi, M.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Feyzi, M. R.
Sensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives [Volume 31, Issue 9, 2018, Pages 1536-1545]
-
Feyzi, M. R.
Novel Unified Control Method of Induction and Permanent Magnet Synchronous Motors [Volume 32, Issue 2, 2019, Pages 256-269]
-
Feyzi, M. Reza
Sensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator [Volume 28, Issue 7, 2015, Pages 1011-1020]
-
Filatova, I.
Diversification of Portfolio of International Oil and Gas Assets using Cluster Analysis [Volume 36, Issue 10, 2023, Pages 1783-1792]
-
Finch, J. W.
A Design Package for Single Tooth per Stator Pole Switched Reluctance Motors [Volume 7, Issue 4, 1994, Pages 197-206]
-
Firdaus, F.
A Light Solution for Device Diversity Problem in a Wireless Local Area Network Fingerprint Indoor Positioning System [Volume 36, Issue 4, 2023, Pages 649-658]
-
Firdaus, F.
Digital Assistant for Pharmacists Using Indonesian Language Based on Rules and Artificial Intelligence [Volume 37, Issue 9, 2024, Pages 1746-1754]
-
Firoozabadi, B.
Experimental Investigation of Friction Coefficient in Ribleted Pipes and the Effect of Fine Particles [Volume 11, Issue 2, 1998, Pages 93-100]
-
Firoozabadi, B.
Hydrodynamics Analysis of Density Currents [Volume 21, Issue 3, 2008, Pages 211-226]
-
Firouzeh, Z. H.
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Firouzi, F.
Thermodynamic Simulation of an Efficient Flash Ironmaking Technology for Chadormalu Mining and Industrial Company [Volume 37, Issue 5, 2024, Pages 1012-1021]
-
Firouzi, M.
A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
-
Firouzian, I.
Pain Facial Expression Recognition from Video Sequences Using Spatio-temporal Local Binary Patterns and Tracking Fiducial Points [Volume 33, Issue 5, 2020, Pages 1038-1047]
-
Firouzian, Iman
Cycle Time Optimization of Processes Using an Entropy-Based Learning for Task Allocation [Volume 32, Issue 8, 2019, Pages 1090-1100]
-
Firouzian, N.
Pain Facial Expression Recognition from Video Sequences Using Spatio-temporal Local Binary Patterns and Tracking Fiducial Points [Volume 33, Issue 5, 2020, Pages 1038-1047]
-
Firouzkouhi, H.
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Firozzare, A.
Efficient Metaheuristic Algorithms for a Robust and Sustainable Water Supply and Wastewater Collection System [Volume 35, Issue 7, 2022, Pages 1440-1456]
-
Fitri, Raihan Annisa
Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
-
Fitriadi Kurnia, R.
Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
-
Fitriani, V. R. L.
Pupil Center Detection Using Radial Symmetry Transform to Measure Pupil Distance in the Eye [Volume 36, Issue 5, 2023, Pages 870-878]
-
Fomina, E.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Fooladi, S.
Segmenting the Lesion Area of Brain Tumor using Convolutional Neural Networks and Fuzzy K-Means Clustering [Volume 36, Issue 8, 2023, Pages 1556-1568]
-
Fooladi Mahani, M.
Hopper Wall Simulation in ANSYS to Determine Displacement Due to Single Ball Impact [Volume 32, Issue 1, 2019, Pages 171-176]
-
Fooladi Mahani, Majid
Nonlinear and Non-stationary Vibration Analysis for Mechanical Fault Detection by Using EMD-FFT Method [Volume 25, Issue 4, 2012, Pages 363-372]
-
Foomani, A. H.
Utilizing a New Voltage Stability Index in Distribution Power System in Presence of Wind Turbine Units [Volume 37, Issue 4, 2024, Pages 711-724]
-
Foorginejad, A.
A Non-destructive Ultrasonic Testing Approach for Measurement and Modelling of Tensile Strength in Rubbers [Volume 33, Issue 12, 2020, Pages 2549-2555]
-
Forghani, M.
Developing the Inventory Routing Problem with Backhauls, Heterogeneous Fleet and Split Service [Volume 31, Issue 6, 2018, Pages 949-958]
-
Formisano, A.
Experimental and Numerical Study of Perforated Steel Plate Shear Panels [Volume 33, Issue 4, 2020, Pages 520-529]
-
Forooghi Nia, M.
Performance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 884-892]
-
Foroozesh, Nazanin
Sustainable Supplier Selection by a New Hybrid Support Vector-model based on the Cuckoo Optimization Algorithm [Volume 30, Issue 6, 2017, Pages 867-875]
-
Foroutani, Kamran
Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
-
Forouzanmehr, M.
Effects of Drying Temperature and Aggregate Shape on the Concrete Compressive Strength: Experiments and Data Mining Techniques [Volume 33, Issue 9, 2020, Pages 1780-1791]
-
Forughi, J.
Study on the Interactions between Mechanical and Structural Properties of the Thermobonded Nonwovens [Volume 16, Issue 4, 2003, Pages 395-406]
-
Fotouhi, D.
Thermal Field Around a Circular Cylinder with Periodic Vortex Shedding [Volume 10, Issue 1, 1997, Pages 27-36]
-
Fotros, Farshad
Effects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core [Volume 24, Issue 3, 2011, Pages 281-290]
-
Fouladi, G. R.
Effect of SiO2 Concentration and Time on Stability of TiO2 Zeolite Nanocomposite Membrane in Light Gas Dehumidification [Volume 37, Issue 2, 2024, Pages 365-376]
-
Fouladinia, F.
Decimal to Excess-3 and Excess-3 to Decimal Code Converters in QCA Nanotechnology [Volume 36, Issue 9, 2023, Pages 1618-1625]
-
Freeda Christy, C.
Enhancing Performance of Infill Masonry With Skin reinforcement Subjected To Cyclic Load [Volume 32, Issue 2, 2019, Pages 223-228]
-
Fu, G.
A Dynamic Model for Laminated Piezoelectric Microbeam [Volume 36, Issue 6, 2023, Pages 1143-1149]
-
Fu, Y.
Simulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods [Volume 32, Issue 7, 2019, Pages 1023-1030]
-
Fufa, K.
Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
-
Fuhao, Z.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
-
Fuming, Z.
Predicting Service Life of Polyethylene Pipes under Crack Expansion using "Random Forest" Method [Volume 36, Issue 12, 2023, Pages 2243-2252]
-
Fuming, Z.
Method for Assessing Damage to Gas Distribution Network Pipelines based on Nonlinear Guided Wave [Volume 37, Issue 5, 2024, Pages 852-859]
-
Fuming, Z.
A Leak Detection Method for Underground Polyethylene Gas Pipelines Using Simulation Software Ansys Fluent [Volume 37, Issue 8, 2024, Pages 1615-1621]
-
Fumito, K.
Two Phase Heat Transfer Characteristics in a Vertical Small Diameter Tube at Sub Atmospheric Pressure [Volume 14, Issue 4, 2001, Pages 377-384]
-
Furizal, F.
Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]
-
Fuwei, W.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
G
-
G, PRABHU
Experimental Investigation by Cryogenic Treatment of Aluminium 6063 and 8011 and NiCoW Coating to Improve Hardness and Wear (TECHNICAL NOTE) [Volume 29, Issue 6, 2016, Pages 827-833]
-
Gabov, V. V.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Gallehdari, S.
Computational Study of Radiative and Convective Heat Transfer in a Cylindrical Combustion Chamber [Volume 16, Issue 2, 2003, Pages 193-204]
-
Gandjalikhan Nassab, S. A.
Thermodynamic Analysis and Statistical Investigation of Effective Parameters for Gas Turbine Cycle using the Response Surface Methodology [Volume 33, Issue 5, 2020, Pages 894-905]
-
Gandjalikhan Nassab, S. A.
Effects of Gas Radiation on Thermal Performances of Single and Double Flow Plane Solar Heaters [Volume 33, Issue 6, 2020, Pages 1156-1166]
-
Gandjalikhan Nassab, S.A.
Thermal Behavior of a New Type of Multi-Layered Porous Air Heater [Volume 19, Issue 1, 2006, Pages 87-94]
-
Gandjalikhan Nassab, S.A.
Application of the Schwarz-Christoffel Transformation in Solving Two-Dimensional Turbulent Flows in Complex Geometries [Volume 21, Issue 4, 2008, Pages 397-406]
-
Gandjalikhan Nassab, S.A.
Thermohydrodynamic Characteristics of Journal Bearings Running under Turbulent Condition [Volume 22, Issue 2, 2009, Pages 181-194]
-
Gandjalikhan Nassab, S.A.
Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow [Volume 24, Issue 3, 2011, Pages 301-319]
-
Gandjalikhan Nassab, S.A.
ANALYSIS OF COMBINED CONDUCTION AND RADIATION HEAT TRANSFER IN A RECTANGULAR FURNACE INCLUDING TWO FLAMES [Volume 25, Issue 1, 2012, Pages 65-70]
-
Gandjalikhan Nassab, S.A.
Ivestigation of Entropy Generation in 3-D Laminar Forced Convection Flow over a Backward Facing Step with Bleeding [Volume 25, Issue 4, 2012, Pages 379-388]
-
Gandjalikhan Nassab, S.A.
Three Dimensional Laminar Convection Flow of Radiating Gas over a Backward Facing Step in a Duct [Volume 25, Issue 4, 2012, Pages 399-410]
-
Gandjalikhan Nassab, S.A.
Inverse Boundary Design Problem of Combined Radiation-convection Heat Transfer in Laminar Recess Flow [Volume 29, Issue 3, 2016, Pages 394-402]
-
Gandomi, M.
Behavioral Analysis of Traffic Flow for an Effective Network Traffic Identification [Volume 30, Issue 11, 2017, Pages 1740-1745]
-
Gangacharyulu, D.
An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1223-1230]
-
Ganghan, Huang
Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
-
Ganjali, Monireh
Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
-
Ganji, B.
Static Coil Design Considerations for the Magnetic Resonance Imaging [Volume 32, Issue 3, 2019, Pages 393-399]
-
Ganji, B. A.
Fabrication of a Novel MEMS Capacitive Microphone using Lateral Slotted Diaphragm [Volume 23, Issue 3, 2010, Pages 191-200]
-
Ganji, D. D.
Effect of Non-uniform Magnetic Field on Non-newtonian Fluid Separation in a Diffuser [Volume 33, Issue 7, 2020, Pages 1354-1363]
-
Ganji, M.
Mitigation Transformer Inrush Current Using Modified Transient Current Limiter [Volume 32, Issue 5, 2019, Pages 701-709]
-
Ganjiani, M.
The Performance of Karafillis-Boyce Yield Function on Determination of Forming Limit Diagrams [Volume 20, Issue 1, 2007, Pages 55-66]
-
Ganjkhanlou, Yadolah
Modeling of Compressive Strength of Metakaolin Based Geopolymers by The Use of Artificial Neural Network RESEARCH NOTE) [Volume 23, Issue 2, 2010, Pages 145-152]
-
Ganjkhanlou, Yadolah
Optimizing of Iron Bioleaching from a Contaminated Kaolin Clay by the Use of Artificial Neural Network [Volume 25, Issue 2, 2012, Pages 81-88]
-
Gannoun, R.
Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
-
Gao, Han
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Gao, J.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Gao, Jianli
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE) [Volume 26, Issue 9, 2013, Pages 975-984]
-
Gao, Song
Parameters Design and Economy Study of an Electric Vehicle with Powertrain Systems in Front and Rear Axle [Volume 29, Issue 4, 2016, Pages 454-463]
-
Gapsari, F.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Garg, B.
Novel Scheme for Data Hiding in Binary Images using Cover Pattern Histogram [Volume 36, Issue 11, 2023, Pages 2124-2136]
-
Garg, Bindu
EmoSense: Pioneering Facial Emotion Recognition with Precision Through Model Optimization and Face Emotion Constraints [(Articles in Press)]
-
Garg, Richa
Antenna Miniaturization Using Fractals (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 39-44]
-
Garmeyi, yoones
Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
-
Garmsiri, Naghmeh
A New Intelligent Approach to Patient-cooperative Control of Rehabilitation Robots [Volume 27, Issue 3, 2014, Pages 467-474]
-
Garzon Castro, Claudia
Web Control and Monitoring System: Experimentation with Haematococcus Pluvialis (TECHNICAL NOTE) [Volume 26, Issue 3, 2013, Pages 219-228]
-
Gaskari, R.
An Intelligent System’s Approach for Revitalization of Brown Fields using only Production Rate Data [Volume 22, Issue 1, 2009, Pages 89-106]
-
Gaurav, K.
Human Disease Prediction using Machine Learning Techniques and Real-life Parameters [Volume 36, Issue 6, 2023, Pages 1092-1098]
-
Gautam, P. M.
An Experimental Investigation of Parabolic Trough Collector Using Industrial-Grade Multiwall Carbon Nanotube (MWCNT) - H2O Based Nanofluid [Volume 35, Issue 1, 2022, Pages 112-120]
-
Gautham Kishore Reddy, G.
Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
-
Gavadimoghaddam, M. R.
Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
-
Ge, Longlong
The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
-
Ge, Wenqing
Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application [Volume 28, Issue 11, 2015, Pages 1656-1662]
-
Ge, Wenqing
Research of Intake Valve Deactivation on Engine Performance [Volume 29, Issue 4, 2016, Pages 473-481]
-
Geer, J. F.
Nonresonant Excitation of the Forced Duffing Equation [Volume 6, Issue 1, 1993, Pages 15-24]
-
George, L. E.
Dynamic Scene Change Detection in Video Coding [Volume 33, Issue 5, 2020, Pages 966-974]
-
Gerami, M.
Effects of Multiple Structure-soil-structure Interactions Considering the Earthquake Waveform and Structures Elevation Effects [Volume 33, Issue 5, 2020, Pages 744-752]
-
Gerami, M.
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Gerami, M.
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Gerami, M.
Bolt Pre-tension Effect on Performance of Bolted Extended End-plate Moment Connections under Cyclic Loading [Volume 35, Issue 3, 2022, Pages 531-543]
-
Gerasimov, V. I.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
G. Golzar, Farzin
Hydroelastic Vibration of a Circular Diaphragm in the Fluid Chamber of a Reciprocating Micro Pump [Volume 27, Issue 4, 2014, Pages 643-650]
-
Ghachem, Kaouther
Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
-
Ghadamian, H
Energy and Exergy Evaluation of Multi-channel Photovoltaic/Thermal Hybrid System: Simulation and Experiment [Volume 32, Issue 11, 2019, Pages 1665-1680]
-
Ghadamian, H.
Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
-
Ghader, S.
Population Balance Equation Modeling of Crude Oil Demulsification Considering Demulsifier: Modification of Collision Frequency Function Based on Thermodynamic Model [Volume 30, Issue 10, 2017, Pages 1434-1442]
-
Ghader, S.
Experimental Investigation and Thermodynamic Modeling of Zn+2 and Ni+2 Extraction from Zn Plant Residue using D2EHPA [Volume 36, Issue 11, 2023, Pages 2015-2027]
-
Ghaderi, F.
A Hybrid Deep Learning Architecture Using 3D CNNs and GRUs for Human Action Recognition [Volume 33, Issue 5, 2020, Pages 959-965]
-
Ghaderi, F.
Quadrotor Control for Tracking Moving Target, and Dynamic Obstacle Avoidance Based on Potential Field Method [Volume 36, Issue 10, 2023, Pages 1720-1732]
-
Ghaderi, F.
Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field [Volume 37, Issue 1, 2024, Pages 115-126]
-
Ghaderi, R.
Modification of the Fast Global K-means Using a Fuzzy Relation with Application in Microarray Data Analysis [Volume 25, Issue 4, 2012, Pages 283-292]
-
Ghaderi, R.
Using Modified IPSO-SQP Algorithm to Solve Nonlinear Time Optimal Bang-Bang Control Problem [Volume 26, Issue 11, 2013, Pages 1307-1322]
-
Ghaderi, Reza
Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control [Volume 27, Issue 7, 2014, Pages 1071-1080]
-
Ghaderi, Reza
Determination of Fiber Direction in High Angular Resolution Diffusion Images using Spherical Harmonics Functions and Wiener Filter [Volume 29, Issue 3, 2016, Pages 328-336]
-
Ghaderi, S.F
Solving a New Multi-objective Inventory-Routing Problem by a Non-dominated Sorting Genetic Algorithm [Volume 31, Issue 4, 2018, Pages 588-596]
-
Ghadimi, Behnam
Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization [Volume 27, Issue 9, 2014, Pages 1431-1438]
-
GHADIMI, NORADIN
Radial Basis Neural Network Based Islanding Detection in Distributed Generation [Volume 27, Issue 7, 2014, Pages 1061-1070]
-
Ghadiri, Younes
A Comprehensive Study of the Hydroforming Process of Metallic Bellows: Investigation and Multi-objective Optimization of the Process Parameters [Volume 32, Issue 11, 2019, Pages 1681-1688]
-
Ghadirzad, N.
High Reynolds Viscous Flow Simulation Past the Elliptical Airfoil by Random Vortex Blob [Volume 30, Issue 12, 2017, Pages 1903-1910]
-
Ghaedi, N.
Application of Polyvinyl Chloride- Halloysite Nanotubes/Uio66-NH2 Mixed Matrix Membranes in Separation of Sunflower Oil from Water [Volume 37, Issue 9, 2024, Pages 1736-1745]
-
Ghaedrahmat, Z.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Ghaed Rahmati, M. H.
Performance of a Two-stages Gas Gun: Experimental, Analytical and Numerical Analysis [Volume 32, Issue 5, 2019, Pages 759-768]
-
Ghaemi, Ahad
Experimental Investigation of Flooding and Drop Size in a Kuhni Extraction Column [Volume 29, Issue 3, 2016, Pages 288-296]
-
Ghaemifard, S.
Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
-
Ghafari, Esmaeel
Appling Metaheuristic Algorithms on a Two Stage Hybrid Flowshop Scheduling Problem with Serial Batching (RESEARCH NOTE) [Volume 27, Issue 6, 2014, Pages 899-910]
-
Ghafari, R.
An Efficient Task Scheduling Based on Seagull Optimization Algorithm for Heterogeneous Cloud Computing Platforms [Volume 35, Issue 2, 2022, Pages 433-450]
-
Ghaffari, A. R.
Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
-
Ghaffari, Arezo
Modified Nanoporous Carbon Material for Anionic Dye Removal from Aqueous Solution [Volume 25, Issue 4, 2012, Pages 259-268]
-
Ghaffari, Hadi
Production of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE) [Volume 26, Issue 7, 2013, Pages 713-720]
-
Ghaffari, S. A.
Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
-
Ghaffari, S.P.
The Effect of Variable Properties on Rayleigh-Benard Convection in an Enclosure Filled with Al2O3-EG-Water Nanofluid [Volume 26, Issue 12, 2013, Pages 1411-1422]
-
Ghaffarian, A.R.
A New Approach for Buckling and Vibration Analysis of Cracked Column. [Volume 21, Issue 3, 2008, Pages 225-230]
-
Ghaffarian, N.
Optimization of Rubber Compound Design Process Using Artificial Neural Network and Genetic Algorithm [Volume 33, Issue 11, 2020, Pages 2319-2326]
-
Ghafiri, A.
Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
-
Ghafouri, Jafar
Computational Fluid Dynamics Simulation and Experimental Validation of Hydraulic Performance of a Vertical Suspended API Pump (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1612-1619]
-
Ghafouri Taleghani, H.
Fabrication of Nanoporous Functionalized Hydroxyapatite as High Performance Adsorbent for Acid Blue 25 Dye Removal [Volume 32, Issue 2, 2019, Pages 193-200]
-
Ghafurian, M. M.
Various Approaches to Thermodynamic Optimization of a Hybrid Multi-effect Evaporation with Thermal Vapour Compression and Reverse Osmosis Desalination System Integrated to a Gas Turbine Power Plant [Volume 32, Issue 5, 2019, Pages 777-789]
-
Ghaheri, S.
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
-
Ghahraman, B.
Giuh- Gciuh Comparison for Two Watersheds in Iran (RESEARCH NOTE) [Volume 9, Issue 4, 1996, Pages 221-230]
-
Ghahraman, Bijan
Effect of Short- and Long-term Memory on Trend Significancy of Mean Annual Flow by Mann-Kendall Test [Volume 26, Issue 10, 2013, Pages 1155-1168]
-
Ghahramani, F.
Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures [Volume 36, Issue 3, 2023, Pages 594-603]
-
Ghalandari, Parvin
Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method [Volume 26, Issue 4, 2013, Pages 341-350]
-
Ghalandarzadeh, M.
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Ghaleh Khondabi, V.
Optimization of Control System of Petroleum Refinery Isomerization Unit by Plant-Wide Control Principles [Volume 32, Issue 7, 2019, Pages 901-907]
-
Ghali, V. S.
Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
-
Ghamari, H.
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Ghamari, M.
Effects of Lateral Constraints and Geometrical Characteristics on Deformation Capacity of the Persian Historic Unreinforced Masonry Shear Walls under Uncertainty Conditions [Volume 33, Issue 11, 2020, Pages 2127-2136]
-
Ghamari, M.
Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
-
Ghanbari, A.
Hybrid Artificial Intelligence Model Development for Roller-compacted Concrete Compressive Strength Estimation [Volume 33, Issue 10, 2020, Pages 1852-1863]
-
Ghanbari, Arezoo
Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
-
Ghanbari, M.
Experimental Study of the Combined Use of Fiber and Nano Silica Particles on the Properties of Lightweight Self Compacting Concrete [Volume 33, Issue 8, 2020, Pages 1499-1511]
-
Ghanbari, M.
Retrofitting of Reinforced Concrete Beams using Lightweight RC Jacket Containing Silica Nano Particles and Glass Fiber [Volume 35, Issue 11, 2022, Pages 2164-2175]
-
Ghanbari, Tohid
Transformer-based Single-source Multilevel Inverter with Reduction in Number of Transformers [Volume 29, Issue 5, 2016, Pages 621-629]
-
Ghanbari Sorkhi, A.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Ghanbari Sorkhi, A.
Accelerating Legislation Processes through Semantic Similarity Analysis with BERT-based Deep Learning [Volume 37, Issue 6, 2024, Pages 1050-1058]
-
Ghanbari Sorkhi, Ali
People Re-identification in Non-overlapping Field-of-views using Cumulative Brightness Transform Function and Body Segments in Different Color Spaces [Volume 28, Issue 12, 2015, Pages 1711-1719]
-
Ghanbarpour, Tohid
Energy Resources Consumption Performance in Iranian Manufacturing Industries by Using Cost/Revenue Efficiency Model [Volume 29, Issue 9, 2016, Pages 1282-1291]
-
Ghanbarzadeh, A.
A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain [Volume 33, Issue 4, 2020, Pages 668-675]
-
Ghandali, R.
A POMDP Framework to Find Optimal Inspection and Maintenance Policies via Availability and Profit Maximization for Manufacturing Systems [Volume 31, Issue 12, 2018, Pages 2077-2084]
-
Ghandil, Mahdi
Analysis of Structural Vibrations due to Passage of Underground Trains [Volume 29, Issue 6, 2016, Pages 742-751]
-
Ghane Kanafi, Armin
Developing a Data Envelopment Analysis Model for a Smart Sustainable Multi-Echelon Supply Chain Using Natural, Managerial, and Free Disposal Hulls: An Approach using Bootstrap Simulation [(Articles in Press)]
-
Ghannadiasl, A.
Dynamic Response of Multi-cracked Beams Resting on Elastic Foundation [Volume 31, Issue 11, 2018, Pages 1830-1837]
-
Ghannadiasl, A.
Sensitivity Analysis of Vibration Response of Railway Structures to Velocity of Moving Load and Various Depth of Elastic Foundation [Volume 33, Issue 3, 2020, Pages 401-409]
-
Ghannadiasl, A.
Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
-
Ghapanvary, M. A.
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Gharavi, M.
A Comparison of Underground Opening Support Design Methods in Jointed Rock Mass (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 235-248]
-
Gharebagh, vahid
STATIC AND DYNAMIC RESPONSE OF CARBON NANOTUBE-BASED NANOTWEEZERS [Volume 24, Issue 4, 2011, Pages 377-386]
-
Gharebagh, vahid
Hydroelastic Vibration of a Circular Diaphragm in the Fluid Chamber of a Reciprocating Micro Pump [Volume 27, Issue 4, 2014, Pages 643-650]
-
Gharehaghaji, A. A.
Study on the Interactions between Mechanical and Structural Properties of the Thermobonded Nonwovens [Volume 16, Issue 4, 2003, Pages 395-406]
-
Gharehaghaji, A. A.
Evaluating Pile Yarn Characteristics in Hand Woven Carpet using Stress-Strain Behavior in Compression [Volume 21, Issue 3, 2008, Pages 303-312]
-
Gharehaghaji, A. A.
Redistribution of Fibers in the Structure of Hollow Ring Spun Yarn [Volume 22, Issue 2, 2009, Pages 197-204]
-
Gharehkhani, A
A New Structure for 6 Bit Distributed MEMS Transmission LinePhase Shifter in Ku Band [Volume 31, Issue 2, 2018, Pages 315-321]
-
Gharehpetian, G. B.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Gharehpetian, Gevork B.
Using Dynamic Thermal Rating and Energy Storage Systems Technologies Simultaneously for Optimal Integration and Utilization of Renewable Energy Sources [Volume 33, Issue 1, 2020, Pages 92-104]
-
Gharemani-Nahr, J.
A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
-
Gharib, M.
A New Approach to Project Risk Responses Selection with Inter-dependent Risks [Volume 30, Issue 5, 2017, Pages 720-728]
-
Gharib, M.
Influence of Chitin Nanofiber and Rice Husk Ash on Properties and Bearing Resistance of Soft Clay Soils [Volume 32, Issue 3, 2019, Pages 373-380]
-
Gharib, M.
An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil [Volume 32, Issue 5, 2019, Pages 685-692]
-
Ghariblu, H.
Maximum Allowable Load On Wheeled Mobile Manipulators (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 279-292]
-
Ghariblu, H.
Optimal Load of Flexible Joint Mobile Robots Stability Approach [Volume 17, Issue 2, 2004, Pages 193-204]
-
GHARIBLU, HASHEM
The Effect of Base Position on Maximum Allowable Load of Dual Arm Robots [Volume 28, Issue 2, 2015, Pages 284-294]
-
Gharvirian, F.
Neural Network Based Protection of Software Defined Network Controller against Distributed Denial of Service Attacks [Volume 30, Issue 11, 2017, Pages 1714-1722]
-
Ghasemabadian, M. A.
Energy Absorption Analysis and Multi-objective Optimization of Tri-layer Cups Subjected to Quasi-static Axial Compressive Loading [Volume 33, Issue 4, 2020, Pages 686-693]
-
Ghasem Alaskari, M. K.
An Efficient Algorithm for General 3D-Seismic Body Waves (SSP and VSP Applications) [Volume 18, Issue 4, 2005, Pages 401-412]
-
Ghasem Alaskari, M. K.
Effects of Salinity, ph and Temperature on CMC Polymer and XC Polymer Performance (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 283-290]
-
Ghasem Alaskari, M. K.
Shear-Wave Dynamic Behavior using Two Different Orientations [Volume 20, Issue 3, 2007, Pages 293-300]
-
Ghasem Ghanbari, P.
Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
-
Ghasemi, Bahman
Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
-
Ghasemi, Ebrahim
Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
-
Ghasemi, J.
A Solution of Riccati Nonlinear Differential Equation using Enhanced Homotopy Perturbation Method (EHPM) [Volume 21, Issue 1, 2008, Pages 27-38]
-
Ghasemi, J.
A Novel Intrusion Detection Systems based on Genetic Algorithms-suggested Features by the Means of Different Permutations of Labels’ Orders [Volume 30, Issue 10, 2017, Pages 1494-1502]
-
Ghasemi, J.
A High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process [Volume 31, Issue 9, 2018, Pages 1553-1558]
-
Ghasemi, J.
A New Structure for Direct Measurement of Temperature Based on Negative Temperature Coefficient Thermistor and Adaptive Neuro-fuzzy Inference System [Volume 31, Issue 10, 2018, Pages 1682-1688]
-
Ghasemi, Jamal
Traffic Signal Prediction Using Elman Neural Network and Particle Swarm Optimization [Volume 29, Issue 11, 2016, Pages 1558-1564]
-
Ghasemi, Jamal
Kinematic Synthesis of Parallel Manipulator via Neural Network Approach [Volume 30, Issue 9, 2017, Pages 1319-1325]
-
Ghasemi, Jamal
A Scheduling Algorithm for Optimizing Electric Vehicle Charging Infrastructure in Parking Lots [(Articles in Press)]
-
Ghasemi, M.
Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
-
Ghasemi, M.
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Ghasemi, Mojtaba
Laboratory Studies of the Effect of Recycled Glass Powder Additive on the Properties of Polymer Modified Asphalt Binders [Volume 26, Issue 10, 2013, Pages 1183-1190]
-
Ghasemi, Mojtaba
Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt [Volume 30, Issue 1, 2017, Pages 40-47]
-
Ghasemi, R.
Distributed Fuzzy Adaptive Sliding Mode Formation for Nonlinear Multi-quadrotor Systems [Volume 33, Issue 5, 2020, Pages 798-804]
-
Ghasemi, R.
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Ghasemi, R.
Quadrotor Control for Tracking Moving Target, and Dynamic Obstacle Avoidance Based on Potential Field Method [Volume 36, Issue 10, 2023, Pages 1720-1732]
-
Ghasemi, R.
Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field [Volume 37, Issue 1, 2024, Pages 115-126]
-
Ghasemi, reza
Improving the performance of flight control system in the presence of uncertainties and extreme changes in parameters using multiple model adaptive control [(Articles in Press)]
-
Ghasemi, S.
Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force [Volume 30, Issue 4, 2017, Pages 500-506]
-
Ghasemi, S.
Adaptive Neuro-fuzzy Inference System Prediction of Zn Metal Ions Adsorption by γ-Fe2o3/Polyrhodanine Nanocomposite in a Fixed Bed Column [Volume 31, Issue 10, 2018, Pages 1617-1623]
-
Ghasemi, S.
Structural Damage Assessment via Model Updating Using Augmented Grey Wolf Optimization Algorithm [Volume 33, Issue 7, 2020, Pages 1173-1182]
-
Ghasemi, S.
Improvement of Sand Soil with Bio-micropiles and Bio-grout Injection in Reinforced Soils [Volume 37, Issue 6, 2024, Pages 1076-1084]
-
Ghasemi, Z.
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Ghasemian, P.
The Influence of Short Values of Hydraulic and Sludge Retention Time on Performance of a Membrane Bioreactor Treating Sunflower Oil Refinery Wastewater [Volume 30, Issue 10, 2017, Pages 1417-1424]
-
Ghasemiasl, R
Blood Flow Simulation in an Aorta with a mild coarctation Using Magnetic Resonance Angiography and Finite Volume Method [Volume 31, Issue 4, 2018, Pages 673-678]
-
Ghaseminejad, Amin
A Quaternion Firefly Algorithm to Solve a Multi-row Facility Layout Problem (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1605-1613]
-
Ghasemi Tari, F.
Minimizing the Mean Tardiness in A N1 Sequencing Problem [Volume 3, Issue 3, 1990, Pages 90-97]
-
Ghasemi Tari, F.
A Branch and Bound Method for Finding Flow Path Designing of Agv Systems (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 81-90]
-
Ghasemlu, Sadjad
Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
-
Ghasemlu, Sadjad
Simulation of Strap-On Boosters Separation in the Atmosphere [Volume 28, Issue 2, 2015, Pages 164-171]
-
Ghasempour, Elyar
Effect of Dual Releasing of β-glycerophosphate and Dexamethasone from Ti Nanostructured Surface for Using in Orthopedic Applications [Volume 32, Issue 10, 2019, Pages 1337-1344]
-
Ghasemzadeh, H
Discovering Popular Clicks\' Pattern of Teen Users for Query Recommendation [Volume 31, Issue 8, 2018, Pages 1205-1214]
-
Ghasemzadeh, M
Discovering Popular Clicks\' Pattern of Teen Users for Query Recommendation [Volume 31, Issue 8, 2018, Pages 1205-1214]
-
Ghasemzadeh, M.
A Versioning Approach to VM Live Migration [Volume 31, Issue 11, 2018, Pages 1838-1845]
-
Ghasemzadeh, M.
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
-
Ghasemzadeh, M.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Ghasemzadeh, Mohammad
Reduction of Computational Complexity in Finite State Automata Explosion of Networked System Diagnosis (RESEARCH NOTE) [Volume 27, Issue 1, 2014, Pages 29-32]
-
Ghasemzadeh, Mohammad
A Hybrid Machine Learning Method for Intrusion Detection [Volume 29, Issue 9, 2016, Pages 1242-1246]
-
Ghasemzadeh, R.
Solidification in Copper Continuously Cast in Graphite Moulds [Volume 2, Issue 3, 1989, Pages 132-143]
-
Ghashghaei, Reza
Simultaneous Monitoring of Multivariate Process Mean and Variability in the Presence of Measurement Error with Linearly Increasing Variance under Additive Covariate Model (RESEARCH NOTE) [Volume 29, Issue 4, 2016, Pages 514-523]
-
Ghashghaei, Reza
A Self-starting Control Chart for Simultaneous Monitoring of Mean and Variance of Simple Linear Profiles [Volume 29, Issue 9, 2016, Pages 1263-1272]
-
Ghassabi, G.
Heat Transfer Enhancement of a Flat Plate Boundary Layer Distributed by a Square Cylinder: Particle Image Velocimetry and Temperature-Sensitive Paint Measurements and Proper Orthogonal Decomposition Analysis [Volume 31, Issue 11, 2018, Pages 1962-1971]
-
Ghassabi, Ghodrat
Optimization of Heat Transfer Enhancement of a Domestic Gas Burner Based on Pareto Genetic Algorithm: Experimental and Numerical Approach [Volume 26, Issue 1, 2013, Pages 59-72]
-
Ghassabi, M.
Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
-
Ghassemi, H.
Numerical Hydrodynamic Performance of the Stepped Planing Craft and Its Step Height Effect (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 602-607]
-
Ghassemi, Hassan
A Fast Immersed Boundary Fourier Pseudo-spectral Method for Simulation of the Incompressible Flows [Volume 27, Issue 9, 2014, Pages 1457-1466]
-
Ghassemi, Hassan
Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
-
Ghassemi, Hassan
Numerical Modeling of the Stepped Planing Hull in Calm Water [Volume 29, Issue 2, 2016, Pages 236-245]
-
Ghassemi, Hassan
Determining the Hydro-acoustic Characteristics of the Ship Propeller in Uniform and Non-uniform Flow [Volume 29, Issue 4, 2016, Pages 530-538]
-
Ghassemian, Hassan
A Robust Strucutural Fingerprint Restoration [Volume 10, Issue 4, 1997, Pages 181-190]
-
Ghassemian, Hassan
Bit Error Performance for Asynchronous Ds Cdma Systems Over Multipath Rayleigh Fading Channels (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 135-140]
-
Ghassempouri, M.
Dynamics of Flexible Manipulators [Volume 7, Issue 1, 1994, Pages 19-32]
-
Ghavami, M.
Adaptive Line Enhancement Using a Parallel IIR Filter with A Step-By-step Algorithm [Volume 11, Issue 2, 1998, Pages 73-82]
-
Ghavampour, S.
Two Stage Multiple Attribute Decision Making Problem in Iranian Gas Distribution Systems [Volume 17, Issue 2, 2004, Pages 135-144]
-
Ghayedi, M.
Algorithm of Predicting Heart Attack with using Sparse Coder [Volume 36, Issue 12, 2023, Pages 2190-2197]
-
Ghayoomi, M.
Designing a Model for Creation of Export Consortiain Business Cluster [Volume 33, Issue 3, 2020, Pages 459-467]
-
Ghayyem, Majed
The Comparison of Imperialist Competitive Algorithm Applied and Genetic Algorithm for Machining Allocation of Clutch Assembly (TECHNICAL NOTE) [Volume 26, Issue 12, 2013, Pages 1485-1494]
-
Ghazavi, M.
Prediction of Mechanical Properties of Frozen Soils Using Response Surface Method: An Optimization Approach [Volume 33, Issue 10, 2020, Pages 1826-1841]
-
Ghazavi, M.
The Effect of Using Reinforced Granular Blanket and Single Stone Column on Improvement of Sandy Soil: Experimental Study [Volume 36, Issue 8, 2023, Pages 1532-1547]
-
Ghazavi, Mohammadreza
Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers [Volume 28, Issue 9, 2015, Pages 1351-1358]
-
Ghazavi, M.R.
Nonlinear Dynamics of the Rotational Slender Axially Moving String with Simply Supported Conditions [Volume 29, Issue 6, 2016, Pages 834-842]
-
Ghazi-Maghrebi, S.
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Ghazimoradi, S.
A Scale-up Design Procedure for Rotating Biological Contactors [Volume 16, Issue 2, 2003, Pages 133-146]
-
Ghazizadeh, R.
Performance Improvement of Expanded Integrated Local Area Networks (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 141-146]
-
Ghazizadeh, R.
Joint Sensing Times Detection Thresholds and Users Association Optimization in Multi-Channel Multi-Antenna Cognitive Radio Networks [Volume 36, Issue 9, 2023, Pages 1704-1719]
-
Ghazvini, S.
Immobilization of Laccase from Trametes hirsuta onto CMC Coated Magnetic Nanoparticles [Volume 33, Issue 4, 2020, Pages 513-519]
-
Ghazvinizadeh, Hossein
Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
-
Gheitasi, A.
Estimation of Hand Skeletal Postures by Using Deep Convolutional Neural Networks [Volume 33, Issue 4, 2020, Pages 552-559]
-
Gherabi, Z.
A Proposed Approach for Separation between Short Circuit Fault, Magnetic Saturation Phenomenon and Supply Unbalance in Permanent Magnet Synchronous Motor [Volume 33, Issue 10, 2020, Pages 1968-1977]
-
Gheyretmand, C
Experimental Study on Using Uniform Tuned Liquid Column Damper for Structural Control of Buildings Resting on Loose Soil [Volume 31, Issue 7, 2018, Pages 1028-1037]
-
Gheyretmand, C.
Numerical and Experimental Study of Soil-structure Interaction in Structures Resting on Loose Soil Using Laminar Shear Box [Volume 30, Issue 11, 2017, Pages 1654-1663]
-
Gheyretmand, C.
Impact of High Strength Rebars on Seismic Behavior of Lightly Reinforced Boundary Elements [Volume 33, Issue 6, 2020, Pages 1094-1104]
-
Gheyretmand, Changiz
Moving Load Analysis of Submerged Floating Tunnels [Volume 25, Issue 1, 2012, Pages 17-24]
-
Gheyretmand, Changiz
Employing Foundation Nonlinearity to Mitigate Seismic Demand in Superstructure [Volume 29, Issue 5, 2016, Pages 606-614]
-
Ghezavati, V. R.
Multi-objective Optimization of Multi-vehicle Relief Logistics Considering Satisfaction Levels under Uncertainty [Volume 33, Issue 5, 2020, Pages 814-824]
-
Ghezavati, V. R.
A Location-Routing Model for Assessment of the Injured People and Relief Distribution under Uncertainty [Volume 33, Issue 7, 2020, Pages 1274-1284]
-
Ghezavati, V. R.
Reduction of Insolvency Risk and Total Costs in Banking Sector using Partners Selection Approach with Genetic Algorithm and Multilayer Perceptron Neural Network [Volume 37, Issue 8, 2024, Pages 1667-1690]
-
Ghezelayagh, M. H.
An Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams [Volume 33, Issue 3, 2020, Pages 505-512]
-
Ghiasi, V.
Numerical Evaluation of Two-dimensional Multi-layer Cover System to Regulate Acid Mine Drainage of Tailing Dams [Volume 36, Issue 10, 2023, Pages 1839-1856]
-
Ghimire, Ram
Finite Capacity Queuing System with Vacations and Server Breakdowns [Volume 24, Issue 4, 2011, Pages 387-394]
-
Ghimire, R. P.
Reliability of Repairable System with Removable Multi-Repairmen [Volume 12, Issue 3, 1999, Pages 155-164]
-
Ghimire, R. P.
Machine Repair Queueing System with with Non-Reliable Service Stations And Heterogeneous Service Discipline (RESEARCH NOTE) [Volume 12, Issue 4, 1999, Pages 271-276]
-
Ghimire, R. P.
On Finite Queue with Two Types of Failures and Preemptive Priority (RESEARCH NOTE) [Volume 14, Issue 1, 2001, Pages 65-68]
-
Ghimire, R. P.
Optimization of M G 1 Queue with Vacation (TECHNICAL NOTE) [Volume 15, Issue 2, 2002, Pages 157-160]
-
Ghimire, R. P.
M1, M2, ..., Mk/G1, G2,..., Gk/l/N Queue with Buffer Division and Push-Out Schemes for ATM Networks (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 377-382]
-
Ghobadi, Changiz
Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1565-1572]
-
Ghobadi, Z.
Biological Pretreatment of a Beverage Waste Using Yeast Isolated from the Factory Sludge (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 223-226]
-
Ghobadi, Zahra
Production of Extracellular Protease and Determination of Optimal Condition by Bacillus Licheniformis BBRC 100053 (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 221-228]
-
Ghobadi Nejad, Z.
Effect of Polyethylene Glycol and Triton X-100 on the Enzymatic Treatment of Bisphenol A [Volume 31, Issue 11, 2018, Pages 1816-1823]
-
Ghobadi Nejad, Z.
Biodegradation of Polychlorinated Biphenyls by and Isolated from Contaminated Soil [Volume 32, Issue 5, 2019, Pages 628-633]
-
Ghobadi Nejad, Z.
Immobilization of Laccase from Trametes hirsuta onto CMC Coated Magnetic Nanoparticles [Volume 33, Issue 4, 2020, Pages 513-519]
-
Ghodrati Amiri, G.
Structural Damage Assessment via Model Updating Using Augmented Grey Wolf Optimization Algorithm [Volume 33, Issue 7, 2020, Pages 1173-1182]
-
Ghodrati Amiri, Gholamreza
Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock [Volume 32, Issue 11, 2019, Pages 1591-1609]
-
Ghodrati Amiri, GH.R.
Seismic Response of 4-Legged Self-Supporting Telecommunication Towers [Volume 20, Issue 2, 2007, Pages 107-126]
-
Ghodrati Amiri, GH.R.
The Effect of Analysis Methods on the Response of Steel Dual-System Frame Buildings for Seismic Retrofitting [Volume 22, Issue 4, 2009, Pages 317-331]
-
Ghodrati Amiri, GH.R.
Probabilistic Seismic Hazard Assessment of Tehran Based on Arias Intensity [Volume 23, Issue 1, 2010, Pages 1-20]
-
Ghodratnama, A.
Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
-
Ghodratnama, Ali
Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
-
Ghodratnama, Ali
Comparing Three Proposed Meta-heuristics to Solve a New p-hub Location-allocation Problem [Volume 26, Issue 9, 2013, Pages 1043-1058]
-
Ghodratnama, Ali
Analytic Network Process Based Strategic Planning for Iran's Trade Promotion Organization [Volume 27, Issue 8, 2014, Pages 1215-1222]
-
Ghodratnama, Ali
Assessment of Improvement of Preventive Maintenance Systems Related to the Civil Projects Using Concepts of Value Engineering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1872-1878]
-
Ghods, M.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Ghods, V.
Challenges of Generation and Transmission Expansion Planning Considering Power System Resilience and Provide Solutions [Volume 36, Issue 5, 2023, Pages 824-841]
-
Ghods, V.
Market-based Real Time Congestion Management in a Smart Grid Considering Reconfiguration and Switching Cost [Volume 36, Issue 5, 2023, Pages 842-857]
-
Ghodsi, M.
Parleda: a Library for Parallel Processing in Computational Geometry Applications [Volume 16, Issue 2, 2003, Pages 123-132]
-
Ghodsi, R.
A possibilistic bi-objective model for a competitive supply chain network design under variable coverage [Volume 31, Issue 9, 2018, Pages 1575-1584]
-
Gholam Abri, A.
Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
-
Gholamalitabar, Hosein
A High Gain Bipolar Pulse Generator with Low Voltage Input Source [Volume 32, Issue 8, 2019, Pages 1126-1133]
-
Gholami, A.
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Gholami, Azadeh
Flow Variables Prediction Using Experimental, Computational Fluid Dynamic and Artificial Neural Network Models in a Sharp Bend [Volume 29, Issue 1, 2016, Pages 14-22]
-
Gholami, F.
Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
-
Gholami, M
Two Novel D-Flip Flops with Level Triggered Reset in Quantum Dot Cellular Automata Technology [Volume 31, Issue 3, 2018, Pages 415-421]
-
Gholami, M.
A High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process [Volume 31, Issue 9, 2018, Pages 1553-1558]
-
Gholami, M.
Optimal Rotor Fault Detection in Induction Motor Using Particle-Swarm Optimization Optimized Neural Network [Volume 31, Issue 11, 2018, Pages 1876-1882]
-
Gholami, M.
Islanding Detection Method of Distributed Generation Based on Wavenet [Volume 32, Issue 2, 2019, Pages 242-248]
-
Gholami, M.
Novel Phase-frequency Detector based on Quantum-dot Cellular Automata Nanotechnology [Volume 33, Issue 2, 2020, Pages 269-276]
-
Gholami, M.
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Gholami, M.
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Gholami, M.
Testable MUXED-D Scan Cell in Quantum-dot Cellular Technology [Volume 35, Issue 9, 2022, Pages 1728-1734]
-
Gholami, M.
Optimal Operation of Multi-microgrid System Considering Uncertainty of Electric Vehicles [Volume 36, Issue 8, 2023, Pages 1398-1408]
-
Gholami, M.
Decimal to Excess-3 and Excess-3 to Decimal Code Converters in QCA Nanotechnology [Volume 36, Issue 9, 2023, Pages 1618-1625]
-
Gholami, Mohammad
Dual Phase Detector Based Delay Locked Loop for High Speed Applications [Volume 27, Issue 4, 2014, Pages 517-522]
-
Gholami, Mohammad
Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
-
Gholami, Mohammad
Phase Frequency Detector Using Transmission Gates for High Speed Applications [Volume 29, Issue 7, 2016, Pages 916-920]
-
Gholami, P.
A New Method for Computation the Success Probability of Coverage for Switch Unit in the Switching Systems [Volume 33, Issue 12, 2020, Pages 2509-2513]
-
Gholami, P.
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Gholami, P.
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Gholamian, Kumarce
Conceptual Design of Sustainable Outsourcing with Balanced Scorecard Using Analytic Hierarchy Process: A Case Study for Fajr Jam Gas Refining Company [Volume 33, Issue 1, 2020, Pages 112-123]
-
Gholamian, M. R.
Application of Incomplete Analytic Hierarchy Process and Choquet Integral to Select the best Supplier and Order Allocation in Petroleum Industry [Volume 33, Issue 11, 2020, Pages 2299-2309]
-
Gholamian, S. A.
Virtual Flux Based Direct Power Control on Vienna Rectifier [Volume 31, Issue 2, 2018, Pages 284-291]
-
Gholamian, S. A.
A Fast Processing Discontinuous Control Strategy for Vienna Rectifier [Volume 33, Issue 10, 2020, Pages 1959-1967]
-
Gholami Bazehhour, Benyamin
Simplified Approach for Torsional Analysis of Non-homogenous Tubes with Non-circular Cross-sections [Volume 25, Issue 3, 2012, Pages 277-288]
-
Gholami Dehbalaee, M. R.
A Proposed Improved Hybrid Hill Climbing Algorithm with the Capability of Local Search for Solving the Nonlinear Economic Load Dispatch Problem [Volume 33, Issue 4, 2020, Pages 575-585]
-
Gholamipour, R.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Gholamnejad, Javad
A Chance Constrained Integer Programming Model for Open Pit Long-Term Production Planning [Volume 21, Issue 4, 2008, Pages 407-418]
-
Gholamnejad, Javad
Determination of Ore/Waste Boundary Using Indicator Kriging, Case Study: Choghart Iron Mine of Iran [Volume 23, Issue 3, 2010, Pages 269-276]
-
Gholamnia, M.
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
-
Gholamnia Roshan, M.
Novel Phase-frequency Detector based on Quantum-dot Cellular Automata Nanotechnology [Volume 33, Issue 2, 2020, Pages 269-276]
-
Gholamzadeh, Sanaz
Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
-
Gholhaki, Majid
Performance of Porous Pavement Containing Different Types of Pozzolans [Volume 32, Issue 9, 2019, Pages 1277-1283]
-
Gholinia, Mosayeb
Numerical and Experimental Analysis of Thermal Boundary Conditions of HDD-Engine Cylinder Head for Different Combustion and Fuel [(Articles in Press)]
-
Gholinia, Mosayeb
Experimental analysis of subcooled flow boiling heat flux on gray cast iron block in heavy-duty diesel engine-like conditions: Optimization using central composite design [(Articles in Press)]
-
Gholipour, R.
Designing a Robust Control Scheme for Robotic Systems with an Adaptive Observer [Volume 32, Issue 2, 2019, Pages 270-276]
-
Gholipour, Reza
Parameter Estimation of Loranz Chaotic Dynamic System Using Bees Algorithm [Volume 26, Issue 3, 2013, Pages 257-262]
-
Gholipour, Reza
Suppression of Chaotic Behavior in Duffing-holmes System using Backstepping Controller Optimized by Unified Particle Swarm Optimization Algorithm [Volume 26, Issue 11, 2013, Pages 1299-1306]
-
Gholipour-Kanani, Y.
A Multi-objective Imperialist Competitive Algorithm for a Capacitated Single-allocation Hub Location Problem [Volume 26, Issue 6, 2013, Pages 605-620]
-
Gholizad, A.
Passive Vibration Control for Fatigue Damage Mitigation in Steel Jacket Platforms [Volume 21, Issue 4, 2008, Pages 313-324]
-
Gholizadeh, S,
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Gholizade Narm, H.
Modelling and Compensation of Uncertain Time-delays in Networked Control Systems with Plant Uncertainty Using an Improved Robust Model Predictive Control Method [Volume 33, Issue 6, 2020, Pages 1134-1141]
-
Gholizade Narm, H.
Control of a Single Stage Boost Inverter Based on Dynamic Sliding Mode Control with Power Decoupling [Volume 33, Issue 10, 2020, Pages 1978-1985]
-
Gholizade Narm, H.
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Gholizade-Narm, Hossein
A Novel Fuzzy Based Method for Heart Rate Variability Prediction [Volume 27, Issue 7, 2014, Pages 1041-1050]
-
Gholizade-Narm, Hossein
A Novel Control Strategy for a Single-phase Grid-connected Power Injection System [Volume 27, Issue 12, 2014, Pages 1841-1849]
-
Ghomashi, Mohammad Javad
An Investigate on Power, Torque and Exhaust Gas Emission Variation: Effect of Hydroxy Gas Addition to Inlet Air of a SI Engine [Volume 27, Issue 11, 2014, Pages 1751-1756]
-
Ghomi-Avili, Morteza
A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
-
Ghorashi, M.
Vibration Analysis of Beams Traversed by a Moving Mass [Volume 8, Issue 4, 1995, Pages 213-220]
-
Ghorashi, M.
Load Carrying Capacity of Simply Supported Variable Thickness Circular Plates [Volume 14, Issue 2, 2001, Pages 155-162]
-
Ghorashi, S. M. S.
Evaluation of Dynamic Probing Testing Effect in Hand Excavated Pit on Test Results Using Numerical Modeling [Volume 33, Issue 8, 2020, Pages 1553-1559]
-
Ghorashi, S. M. S.
Compaction Quality Control of Coarse-grained Soils Using Dynamic Penetration Test Results through Correlation with Relative Compaction Percentages [Volume 36, Issue 3, 2023, Pages 473-480]
-
Ghorbani, F.
Aqueous Cadmium Ions Removal by Adsorption on APTMS Grafted Mesoporous Silica MCM-41 in Batch and Fixed Bed Column Processes [Volume 26, Issue 5, 2013, Pages 473-488]
-
Ghorbani, Farshid
The Potential of Date-palm Leaf Ash as Low-cost Adsorbent for the Removal of Pb(II) Ion from Aqueous Solution [Volume 25, Issue 4, 2012, Pages 269-278]
-
Ghorbani, H.
Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
-
Ghorbani, H.
MD-Simulation of Duty Cycle and TaN Interlayer Effects on the Surface Properties of Ta Coatings Deposited by Pulsed-DC Plasma Assisted Chemical Vapor Deposition [Volume 33, Issue 5, 2020, Pages 861-869]
-
Ghorbani, H.R.
A Comprehensive Model for R and D Project Portfolio Selection with Zero-One Linear Goal-Programming (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 55-66]
-
Ghorbani, M.
Adaptive Neuro-fuzzy Inference System Prediction of Zn Metal Ions Adsorption by γ-Fe2o3/Polyrhodanine Nanocomposite in a Fixed Bed Column [Volume 31, Issue 10, 2018, Pages 1617-1623]
-
Ghorbani, M.
Fabrication of Nanoporous Functionalized Hydroxyapatite as High Performance Adsorbent for Acid Blue 25 Dye Removal [Volume 32, Issue 2, 2019, Pages 193-200]
-
Ghorbani, M.
Efficient Metaheuristic Algorithms for a Robust and Sustainable Water Supply and Wastewater Collection System [Volume 35, Issue 7, 2022, Pages 1440-1456]
-
Ghorbani, Mohammad
Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
-
Ghorbani, Mohammad
Synergistic Influence of Benzoate Ions on Inhibition of Corrosion of Mild Steel in 0.5m Sulfuric Acid by Benzotriazole [Volume 16, Issue 3, 2003, Pages 255-264]
-
Ghorbani, Mohammad
A Study of Zeta Potential of Plasma Sprayed Hydroxyapatite Coating in Four Simulated Physiological Solutions [Volume 16, Issue 4, 2003, Pages 343-354]
-
Ghorbani, S.
Taguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder [Volume 33, Issue 8, 2020, Pages 1598-1607]
-
Ghorbani, S.
Taguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder [Volume 33, Issue 8, 2020, Pages 1598-1607]
-
Ghorbani, S.
Effects of Drying Temperature and Aggregate Shape on the Concrete Compressive Strength: Experiments and Data Mining Techniques [Volume 33, Issue 9, 2020, Pages 1780-1791]
-
Ghorbani, S.
Enhanced Autoregressive Integrated Moving Average Model for Anomaly Detection in Power Plant Operations [Volume 37, Issue 8, 2024, Pages 1691-1699]
-
Ghorbanian, K.
Numerical Investigation on Compressible Flow Characteristics in Axial Compressors Using a Multi Block Finite Volume Scheme [Volume 15, Issue 1, 2002, Pages 91-104]
-
Ghorbanian, K.
A 2-D Numerical Investigation on the Modal Characteristics of Rotating-Stall with a Variable-Cascade- Length Approach in an Axial Compressor [Volume 16, Issue 1, 2003, Pages 81-90]
-
Ghorbanian, K.
A Numerical Investigation on the Unstable Flow in a Single Stage of an Axial Compressor [Volume 16, Issue 2, 2003, Pages 171-182]
-
Ghorbanian, Vahid
Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach [Volume 27, Issue 1, 2014, Pages 69-78]
-
Ghorbani Fard, Mohammad Reza
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Ghorbani-HasanSaraei, Azade
Kinetics of Reshteh Khoshkar Color Changes During Atmospheric and Vacuum Deep-fat Frying [Volume 29, Issue 12, 2016, Pages 1670-1676]
-
Ghorbani Valikchali, F.
Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
-
Ghorbankhan, A. Ghorbankhan
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Ghorbannia Delavar, A.
High Speed Full Swing Current Mode BiCMOS Logical Operators [Volume 20, Issue 3, 2007, Pages 211-220]
-
Ghorbanpour, ali
Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
-
Ghoreishi, S. M.
Dispersion Coefficients of Supercritical Fluid in Fixed Beds [Volume 13, Issue 1, 2000, Pages 1-14]
-
Ghoreishian, F.
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Ghoreishy, H
Virtual Flux Based Direct Power Control on Vienna Rectifier [Volume 31, Issue 2, 2018, Pages 284-291]
-
Ghoreishy, H.
Controlling Common-Mode Voltages in Multilevel Inverters [Volume 21, Issue 3, 2008, Pages 243-254]
-
Ghoreishy, H.
A Fast Processing Discontinuous Control Strategy for Vienna Rectifier [Volume 33, Issue 10, 2020, Pages 1959-1967]
-
Ghoreishy, H.
A New Variable Frequency Zero Voltage Switching Control Method for Boost Converter Operating in Boundary Conduction Mode [Volume 33, Issue 11, 2020, Pages 2222-2232]
-
Ghoreishy, H.
An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
-
Ghoreyshi, A
Composite Multi Wall Carbon Nano Tube Polydimethylsiloxane Membrane Bioreactor for Enhanced Bioethanol Production from Broomcorn Seeds [Volume 31, Issue 4, 2018, Pages 516-523]
-
Ghoreyshi, A.A.
A Two-step Catalytic Production of Biodiesel from Waste Cooking Oil [Volume 26, Issue 6, 2013, Pages 563-570]
-
Ghoreyshi, Ali Asghar
Recovery of Methyl Acetoacetate from Antibiotic Production Plant\'s Waste Streams (TECHNICAL NOTE) [Volume 22, Issue 2, 2009, Pages 123-129]
-
Ghoreyshi, Ali Asghar
Enhanced Bioethanol Production in Batch Fermentation by Pervaporation Using a PDMS Membrane Bioreactor [Volume 25, Issue 4, 2012, Pages 249-258]
-
Ghoreyshi, Ali Asghar
Adsorption of Fe (II) from Aqueous Phase by Chitosan: Application of Physical Models and Artificial Neural Network for Prediction of Breakthrough [Volume 26, Issue 8, 2013, Pages 845-858]
-
Ghoreyshi, Ali Asghar
Adsorption of Phenolic Compounds onto the Activated Carbon Synthesized from Pulp and Paper Mill Sludge: Equilibrium Isotherm, Kinetics, Thermodynamics and Mechanism Studies [Volume 27, Issue 10, 2014, Pages 1485-1494]
-
Ghoreyshi, Ali Asghar
Amine Based CO2 Absorption in Membrane Contactor Using Polyvinyl Pyrrolidone-modified Polysulfone Flat Sheet Membrane: Experimental Study and Mass Transfer Resistance Analysis [Volume 29, Issue 11, 2016, Pages 1489-1498]
-
Ghoudjehbaklou, H.
A New Algorithm for Optimum Voltage and Reactive Power Control for Minimizing Transmission Lines Losses [Volume 14, Issue 2, 2001, Pages 91-98]
-
Gilani, S.
Textural and Structural Characterizations of Mesoporous Chitosan Beads for Immobilization of Alpha-Amylase: Diffusivity and Sustainability of Biocatalyst [Volume 32, Issue 2, 2019, Pages 207-216]
-
Girija Sravani, K.
Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
-
Girinivas, Keshavaraj
Unconfined Compressive Strength of Cement Stabilized Soil Using Industrial Wastes Including Optimization of Polypropylene Fiber [(Articles in Press)]
-
Gitinavard, H.
A New Balancing and Ranking Method based on Hesitant Fuzzy Sets for Solving Decision-making Problems under Uncertainty [Volume 28, Issue 2, 2015, Pages 214-223]
-
Gitinavard, H.
Evaluating Construction Projects by a New Group Decision-Making Model Based on Intuitionistic Fuzzy Logic Concepts [Volume 28, Issue 9, 2015, Pages 1312-1319]
-
Gitinavard, H.
A New Extended Analytical Hierarchy Process Technique with Incomplete Interval-valued Information for Risk Assessment in IT Outsourcing [Volume 30, Issue 5, 2017, Pages 739-748]
-
Glushkov, A. N.
Digital Binary Phase-shift Keyed Signal Detector [Volume 32, Issue 4, 2019, Pages 510-518]
-
Glushkov, A. N.
Digital Root-mean-square Signal Meter [Volume 33, Issue 11, 2020, Pages 2201-2208]
-
Goaiz, H. A.
Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
-
Goaiz, H. A.
Evaluation of lightweight Concrete Core Test Including Steel Bars [Volume 36, Issue 6, 2023, Pages 1121-1128]
-
Godini, H.
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
-
Godratnama, A.
An Efficient Algorithm to Allocate Parts to Cells Minimizing Total Tardiness and Idle Times [Volume 17, Issue 4, 2004, Pages 381-388]
-
Goel, A.
New Stilling Basins Designs for Deep Rectangular Outlets [Volume 17, Issue 1, 2004, Pages 1-10]
-
Goel, A.
Twin Plate Weir: A Flow Measuring Device (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 249-256]
-
Goel, A.
ANN Based Modeling for Prediction of Evaporation in Reservoirs (RESEARCH NOTE) [Volume 22, Issue 4, 2009, Pages 351-358]
-
Goel, A.
STAGE-DISCHARGE MODELING USING SUPPORT VECTOR MACHINES [Volume 25, Issue 1, 2012, Pages 1-10]
-
Goh, P. S
Adsorptive Removal of Cr(VI) and Cu(II) Ions from Water Solution using Graphene Oxide-Manganese Ferrite (GMF) Nanomaterials [Volume 31, Issue 8, 2018, Pages 1341-1346]
-
Goh, P. S
Zwitterion Embedded Thin Film Composite Membrane for Oily Wastewater Treatment [Volume 31, Issue 8, 2018, Pages 1464-1472]
-
Gohari, A.
Lattice Boltzmann Method Application on Headwater at Lata Kinjang Waterfall, Malaysia [Volume 33, Issue 5, 2020, Pages 760-769]
-
Gohari, Maryam
An Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 411-416]
-
Goharriz, Mojtaba
Assessment of Lateral Displacements using Neuro-Fuzzy Group Method of Data Handling Systems [Volume 28, Issue 5, 2015, Pages 677-685]
-
Gokul, G.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Gol, S
The Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method [Volume 31, Issue 2, 2018, Pages 307-314]
-
Golabchi, M.
Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
-
Golafshani, A. A.
The Effect of Added Mass Fluctuation on Heave Vibration of TLP [Volume 18, Issue 3, 2005, Pages 219-228]
-
Golafshani, A. A.
Passive Vibration Control for Fatigue Damage Mitigation in Steel Jacket Platforms [Volume 21, Issue 4, 2008, Pages 313-324]
-
Golafshani, M.
A Composite Finite Difference Scheme for Subsonic Transonic Flows (RESEARCH NOTE). [Volume 10, Issue 1, 1997, Pages 37-44]
-
Golakiya, V. D.
Experimental Formability Study of Ti6Al4V Sheet Metal using Friction Stir Heat Assisted Single Point Incremental Forming Process [Volume 35, Issue 3, 2022, Pages 560-566]
-
Golbakhshi, Hossein
Finite Element Analysis for Estimating the Effect of Various Working Conditions on the Temperature Gradients Created Inside a Rolling Tire [Volume 27, Issue 12, 2014, Pages 1920-1927]
-
Golbakhshi, Hossein
Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1525-1532]
-
Golestanian, H.
Experimental and Neural Network Prediction of Elongation and Spread after First Stage of Fullering [Volume 23, Issue 3, 2010, Pages 233-242]
-
Golestanipour, Masoud
A Novel, Simple and Cost Effective Al A356/Al2O3 Nano-composite Manufacturing Route with Uniform Distribution of Nanoparticles [Volume 28, Issue 9, 2015, Pages 1320-1327]
-
Goliaei, S.
Centralized Path Planning for Multi-aircraft in the Presence of Static and Moving Obstacles [Volume 33, Issue 5, 2020, Pages 923-933]
-
Golibidgoli, Mohsen
Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method [Volume 32, Issue 6, 2019, Pages 860-865]
-
Golmakani, Mohamad Esmaeel
Non-linear Thermo-mechanical Bending Behavior of Thin and Moderately Thick Functionally Graded Sector Plates Using Dynamic Relaxation Method [Volume 29, Issue 6, 2016, Pages 870-878]
-
Golmohammadi, A. M.
A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
-
Golnabi, H.
Theoretical Studies of Electrical Characteristics of the Nitrogen Laser [Volume 7, Issue 3, 1994, Pages 143-154]
-
Golnabi, H.
Fiber - Optic Sensing of Linear Thermal Expansion (RESEARCH NOTES) [Volume 9, Issue 2, 1996, Pages 37-43]
-
Golnabi, H.
The Study of Breakdown Voltages for Triggered Spark Gap Switches [Volume 9, Issue 3, 1996, Pages 143-150]
-
Golnabi, H.
Design and Construction of a Sensitive Capasitive Sensor System (RESEARCH NOTE) [Volume 13, Issue 2, 2000, Pages 69-80]
-
Golnabi, H.
Power Supply and Current Modulation Circuits for Semiconductor Lasers [Volume 13, Issue 4, 2000, Pages 1-16]
-
Golnabi, H.
Weight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE) [Volume 14, Issue 2, 2001, Pages 99-106]
-
Golozar, M. A.
Fractographic Aspects of Stress Corrosion Failure of Zircaloy 2 in CH3OH HCL Solutions [Volume 3, Issue 1, 1990, Pages 23-30]
-
Golozar, M. A.
Structural and Mechanical Characterization of Austempered Cu - Sn Ductile Iron Alloys [Volume 5, Issue 1, 1992, Pages 39-48]
-
Golozar, M. A.
Morphological Characterization of Combustion Deposited Diamond Crystals and Films [Volume 15, Issue 3, 2002, Pages 255-260]
-
Golpaiegani, L. A.
Digital Binary Phase-shift Keyed Signal Detector [Volume 32, Issue 4, 2019, Pages 510-518]
-
Golpaigani, Hamid Reza
Single Machine Scheduling Problem with Precedence Constraints and Deteriorating Jobs [Volume 24, Issue 2, 2011, Pages 115-122]
-
Golsorkhtabaramiri, M.
Fuzzy Centralized Coordinate Learning and Hybrid Loss for Human Activity Recognition [Volume 35, Issue 1, 2022, Pages 130-141]
-
GolsorkhtabariAmiri, M.
Fall Detection using Deep Learning Algorithms and Analysis of Wearable Sensor Data by Presenting a New Sampling Method [Volume 35, Issue 10, 2022, Pages 1941-1958]
-
Golzarfar, Arman
Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
-
Golzari, Soudabeh
Energy and Exergy Analysis of Air PV/T Collector of Forced Convection with and without Glass Cover [Volume 26, Issue 8, 2013, Pages 913-926]
-
Gong, J.
An Incentive Mechanism for Energy Internet of Things Based on Blockchain and Stackelberg Game [Volume 36, Issue 8, 2023, Pages 1468-1477]
-
Goodarzi, M.
Calculation of Complicated Flows, Using First and Second-Order Schemes (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 269-278]
-
Goodarzian, F.
Mathematical Formulation and Solving of Green Closed-loop Supply Chain Planning Problem with Production, Distribution and Transportation Reliability [Volume 31, Issue 12, 2018, Pages 2059-2067]
-
Goodarzian, F.
A Multi-objective Sustainable Medicine Supply Chain Network Design Using a Novel Hybrid Multi-objective Metaheuristic Algorithm [Volume 33, Issue 10, 2020, Pages 1986-1995]
-
Goodarzian Urimi, M.
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Goravanchi, P.
A Very Low Voltage 9th Order Linear Phase Baseband Switched Capacitor Filter (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 19-24]
-
Gorelikov, V. G.
Investigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 790-793]
-
Gorgani Firouzjah, K.
A New Structure for Direct Measurement of Temperature Based on Negative Temperature Coefficient Thermistor and Adaptive Neuro-fuzzy Inference System [Volume 31, Issue 10, 2018, Pages 1682-1688]
-
Gorgani Firouzjah, K.
Fault Location on Compensated Transmission Lines without Current Measurement [Volume 31, Issue 12, 2018, Pages 2044-2051]
-
Gorgani Firouzjah, Khalil
A Scheduling Algorithm for Optimizing Electric Vehicle Charging Infrastructure in Parking Lots [(Articles in Press)]
-
Gorji, H.
Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming [Volume 32, Issue 4, 2019, Pages 587-595]
-
Gorji, H.
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming [Volume 33, Issue 5, 2020, Pages 906-915]
-
Gorji, H.
Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
-
Gorji, Mofid
Optimal Thermodynamic Design of Turbofan Engines using Multi-objective Genetic Algorithm [Volume 27, Issue 6, 2014, Pages 961-970]
-
Gorji, Mofid
Uncertainties due to Fuel Heating Value and Burner Efficiency on Performance Functions of Turbofan Engines Using Monte Carlo Simulation [Volume 27, Issue 7, 2014, Pages 1139-1148]
-
Gorji, Mofid
A passive approach to cooling photovoltaic devices by utilizing pin fins [(Articles in Press)]
-
Gorji, Mohsen
Determining the Hydro-acoustic Characteristics of the Ship Propeller in Uniform and Non-uniform Flow [Volume 29, Issue 4, 2016, Pages 530-538]
-
Gorji Band pey, M.
a Comparison Study Between the Joint Probability Approach and Time Series Rainfall Modelling in Coastal Detention Pond Analysis (RESEARCH NOTE) [Volume 13, Issue 2, 2000, Pages 85-93]
-
Gorji Band pey, M.
Selection of Design Events in Tidally Affected Detention Pond Systems (RESEARCH NOTE) [Volume 14, Issue 2, 2001, Pages 163-172]
-
Gorji Band pey, M.
A Parametric Study for Identification of the Variables in Tidally Affected Pond Systems (TECHNICAL NOTE) [Volume 14, Issue 2, 2001, Pages 173-180]
-
Gorshkov, L. K.
Investigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 790-793]
-
Goshtasbi Rad, Ebrahim
Experimental Investigation of Mixed Convection Heat Transfer in Vertical Tubes by Nanofluid: Effects of Reynolds Number and Fluid Temperature [Volume 27, Issue 8, 2014, Pages 1251-1258]
-
Goshtasbi Rad, Ebrahim
Investigating the Third Order Solitary Wave Generation Accuracy using Incompressible Smoothed Particle Hydrodynamics [Volume 29, Issue 3, 2016, Pages 426-435]
-
Goudar, S.
An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
-
Goudarzi, Koorosh
Effect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat [Volume 21, Issue 4, 2008, Pages 401-408]
-
Goudarzi, Koorosh
Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
-
Goudarzian, A.
Voltage Regulation of a Negative Output Luo Converter Using a PD-PI Type Sliding Mode Current Controller [Volume 32, Issue 2, 2019, Pages 277-285]
-
Govindaraju, M.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Gowri, R.
Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
-
Gowri, R.
Optimal Filter Length Selection for Universal Filtered Multicarrier Systems [Volume 36, Issue 7, 2023, Pages 1322-1330]
-
Gowthami, Y.
Performance Analysis and Optimization of Asymmetric Front and Back Pi Gates with Dual Material in Gallium Nitride High Electron Mobility Transistor for Nano Electronics Application [Volume 36, Issue 7, 2023, Pages 1269-1277]
-
Gowthami, Y.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Gowthami, Y.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Gowthami, Y.
An Improved Structure and Analysis of Asymmetrical Spacer Nanowire Tunnel Field Effect Transistor [(Articles in Press)]
-
Goyal, Nidhi
Soret Dufour Driven Thermosolutal Instability of Darcy-maxwell Fluid [Volume 25, Issue 4, 2012, Pages 367-378]
-
Graciano-Uribe, J.
Control of Formation of Intermetallic Compound in Dissimilar Joints Aluminum-steel [Volume 32, Issue 1, 2019, Pages 127-136]
-
Graciano-Uribe, J.
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
Grailoo, M.
AIOSC: Analytical Integer Word-length Optimization Based on System Characteristics for Recursive Fixed-Point Linear Time Invariant Systems [Volume 33, Issue 7, 2020, Pages 1223-1230]
-
Grailu, H.
Compressing Face Images Using Genetic and Gray Wolf Meta-heuristic Algorithms Based on Variable Bit Allocation [Volume 36, Issue 4, 2023, Pages 682-697]
-
Grari, M.
Numerical Modeling of Non-equilibrium Plasma Discharge of Hydrogenated Silicon Nitride (SiH4/NH3/H2) [Volume 33, Issue 8, 2020, Pages 1440-1449]
-
Gribanov, Danila
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Gribanov, Mikhail
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Grigoropoulos, C. P.
Modified Enthalpy Method Applied to Laser Annealing of Semi Conductor Films [Volume 8, Issue 3, 1995, Pages 169-179]
-
G. Taleghani, H.
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Guan, Z. C.
Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
-
Guan, Zhichuan
Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
-
Guediri, A.
Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
-
Guediri, A.
Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
-
Gulhane, N. P.
On Numerical Investigation of Semi-empirical Relations Representing Local Nusselt Number at Lower Nozzle-target Spacing’s [Volume 32, Issue 1, 2019, Pages 137-145]
-
Gulhane, N. P.
Heat Transfer Augmentation for Impingement of Steady Air Jet under Exponential Heat Flux Boundary Condition [Volume 37, Issue 5, 2024, Pages 920-930]
-
GULHANE, NITIN
On Numerical Investigation of Non-dimensional Constant Representing the Occurrence of Secondary Peaks in the Nusselt Distribution Curves [Volume 29, Issue 10, 2016, Pages 1431-1440]
-
Gumilar, I.
Utilizing Semi-Variograms and Geostatistical Approach for Land Value Model in Urban Region [Volume 36, Issue 12, 2023, Pages 2222-2231]
-
Gunasekaran, K.
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Gunasekaran, N.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Gunawan, H.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Gunawarman, .
Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
-
Guo, L.
Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks [Volume 33, Issue 11, 2020, Pages 2416-2424]
-
Guo, L.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Guo, Zhaolu
Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
-
Guolong, C.
Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
-
Gupta, A.V. S. S. K. S.
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Gupta, K.K.
Modeling of Unreinforced and Reinforced Pavement Composite Material Using HISS Model (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 13-22]
-
Gupta, M.
Evaluation and Prediction of Self-healing Assessments for AA2014 Based Hybrid Smart Composite Structures: A Novel Fuzzy Logic Approach [Volume 35, Issue 10, 2022, Pages 1841-1857]
-
Gupta, M.
Viscosity Analysis of Water-based Copper Oxide Nanofluids [Volume 36, Issue 3, 2023, Pages 481-489]
-
Gupta, N
An Accurate 2D Analytical Model for Transconductance to Drain Current ratio (gm/Id) for a Dual Halo Dual Dielectric Triple Material Cylindrical Gate All Around MOSFETs [Volume 31, Issue 7, 2018, Pages 1038-1043]
-
Gupta, N.
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Gupta, Nidhi
Estimation of Software Reliability by Sequential Testing with Simulated Annealing of Mean Field Approximation [Volume 19, Issue 1, 2006, Pages 35-44]
-
Gupta, Nisha
Quasi Random Deployment Strategy for Reliable Communication Backbones in Wireless Sensor Networks [Volume 28, Issue 10, 2015, Pages 1430-1438]
-
Gupta, P.
Voltage Differencing Buffered Amplifier based Voltage Mode Four Quadrant Analog Multiplier and its Applications [Volume 32, Issue 4, 2019, Pages 528-535]
-
Gupta, P. K.
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Gupta, P.
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Gupta, P.
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Gupta, Rajeev
Behavior of Model Circular Footings on Silty Soils with Cellular Supports [Volume 23, Issue 1, 2010, Pages 21-36]
-
Gupta, S.
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Gupta, S.
Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
-
Gupta, Trilok
Assessment of Mechanical Properties of Concrete Containing Granite Slurry Waste (TECHNICAL NOTE) [Volume 29, Issue 5, 2016, Pages 599-605]
-
Gupta, V.
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
GUPTA, SORABH
Performance Modeling of Power Generation System of a Thermal Plant [Volume 24, Issue 3, 2011, Pages 239-248]
-
Guy, Lefebvre
Influence of Compaction Condition on the Microstructure of a Non-Plastic Glacial Till [Volume 17, Issue 3, 2004, Pages 227-236]
-
Guzev, M. A.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Guzev, M. A.
Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
H
-
Habeeb, S. A.
Visible Light Activated Fe-N-SiO2/TiO2 Photocatalyst: Providing an Opportunity for Enhanced Photocatalytic Degradation of Antibiotic Oxytetracycline in Aqueous Solution [Volume 36, Issue 4, 2023, Pages 615-629]
-
Habibi, Alireza
Nonlinear sensitivity Analysis of RCMRF Considering Both Axial and Flexure Effects (RESEARCH NOTE) [Volume 24, Issue 3, 2011, Pages 223-238]
-
Habibi, M.
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Habibi, M.
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Habibi, Mohammad Javad
Synthesis and Characterization of Amine-modified Mesoporous SBA-15 for Carbon Dioxide Sequestration at High Pressure and Room Temperature (RESEARCH NOTE) [Volume 29, Issue 10, 2016, Pages 1341-1346]
-
Habibi, N.
Fatigue Life of Repaired Welded Tubular Joints [Volume 26, Issue 1, 2013, Pages 25-32]
-
Habibi Bajguirani, H. R.
Morphological Characterization of Combustion Deposited Diamond Crystals and Films [Volume 15, Issue 3, 2002, Pages 255-260]
-
Habibi Davijani, Ali
Synthesis of Ethylenediamine-modified Ordered Mesoporous Carbon as a New Nanoporous Adsorbent for Removal of Cu(II) and Pb(II) Ions from Aqueous Media [Volume 27, Issue 9, 2014, Pages 1415-1422]
-
Habibnejad, A.
Design, Modeling, Implementation and Experimental Analysis of 6R Robot (TECHNICAL NOTE) [Volume 21, Issue 1, 2008, Pages 71-84]
-
Habibnia, M.
Joining Two Dissimilar Metals of Aluminum 5052 to Austenitic Stainless Steel 304 using Ultrasonic Friction Stir Welding [Volume 36, Issue 8, 2023, Pages 1489-1501]
-
Habibolahzadeh, Ali
Duplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer [Volume 28, Issue 8, 2015, Pages 1193-1198]
-
Hachimi, H
Comparison of Inventory Models for Optimal Working Capital; Case of Aeronautics Company [Volume 31, Issue 4, 2018, Pages 605-611]
-
Hadaeghi, A.
Artificial Neural Network-based Fault Location in Terminal-hybrid High Voltage Direct Current Transmission Lines [Volume 36, Issue 2, 2023, Pages 215-225]
-
Haddad, A.
Effect of Fuzzy Boundaries on the Bearing Capacity of Footings on Two-Layered Clay [Volume 32, Issue 5, 2019, Pages 667-672]
-
Haddad, A.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
HADDADNIA, JAVAD
Speech Enhancement using Laplacian Mixture Model under Signal Presence Uncertainty [Volume 27, Issue 9, 2014, Pages 1367-1376]
-
Hadian, A.
Pressure-Velocity Coupled Finite Volume Solution of Steady Incompressible Invscid Flow Using Artificial Compressibility Technique [Volume 17, Issue 2, 2004, Pages 109-118]
-
Hadian, M. R.
Development of an Implicit Numerical Model for Calculation of Sub and Super Critical Flows [Volume 18, Issue 1, 2005, Pages 27-38]
-
Hadian, M. R.
Development of an Implicit Numerical Model for Calculation of SUB-and Super-Critical Flows [Volume 18, Issue 1, 2005, Pages 85-95]
-
Hadiani, N.
Performance of Pile Group in Soils Prone to Liquefaction Affected by Far and Near Earthquakes [Volume 37, Issue 7, 2024, Pages 1208-1220]
-
Hadian Jazi, S.
Map-merging in Multi-robot Simultaneous Localization and Mapping Process Using Two Heterogeneous Ground Robots [Volume 32, Issue 4, 2019, Pages 608-616]
-
Hadian Jazi, Shahram
Fingertip Radius Effect of an on-Surface-Manipulated Object [Volume 30, Issue 1, 2017, Pages 134-142]
-
Hadighi, A.
A New Approach Applying Multi-objective Optimization using a Taguchi Fuzzy-based for Tourist Satisfaction Management [Volume 32, Issue 3, 2019, Pages 405-412]
-
Hadiyanto, H.
Equilibrium of Ammonia (NH3) and Ammonium (NH4+) during Microalgae Harvesting using Electrocoagulation [Volume 36, Issue 3, 2023, Pages 565-572]
-
Hadiyanto, Hady
Phytoremediation of Palm Oil Mill Effluent by using Pistia Stratiotes Plant and Algae Spirulina sp for Biomass Production (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1809-1814]
-
Hadiyanto, Hady
Ultrasound Assisted In Situ Esterification of Rubber Seeds Oil for Biodiesel Production (RESEARCH NOTE) [Volume 29, Issue 12, 2016, Pages 1635-1641]
-
Hadiyoso, S.
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Hadji Molana, S. Y.
A Multi Objective Optimization Model for Multi-commodity Closed-loop Supply Chain Network Considering Disruption Risk [Volume 37, Issue 4, 2024, Pages 646-661]
-
Haeri, A
Automotive Vendor's Performance Evaluation and Improvement Plan Presentation by Using a Data Envelopment Analysis [Volume 31, Issue 2, 2018, Pages 374-381]
-
Haese-Coat, V.
Visual Pattern Image Coding by a Morphological Approach (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 371-378]
-
Hafezalkotob, A.
Developing a Fuzzy Measurement of Alternatives and Ranking Compromise Solution Method for Determining Essential Barriers in Iranian Car Industry [Volume 36, Issue 1, 2023, Pages 90-97]
-
Hafezalkotob, A.
A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
-
Hafezalkotob, A.
Performance Evaluating Energy, Economic and Environmental Performance with an Integrated Approach of Data Envelopment Analysis and Game Theory [Volume 37, Issue 5, 2024, Pages 959-973]
-
Hafezalkotob, Ashkan
MODELING RISK OF LOSING A CUSTOMER IN A TWO-ECHELON SUPPLY CHAIN FACING AN INTEGRATED COMPETITOR: A GAME THEORY APPROACH [Volume 25, Issue 1, 2012, Pages 11-34]
-
Hafezalkotob, Ashkan
Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
-
Hafezalkotob, Ashkan
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach [Volume 33, Issue 1, 2020, Pages 124-133]
-
Hafid Hasim, A. Hafid Hasim
Monitoring the Built-up Area Transformation Using Urban Index and Normalized Difference Built-up Index Analysis [Volume 32, Issue 5, 2019, Pages 647-653]
-
Hafiz, T. A.
Influence of Temperature and Moisture on the Compressive Strength of Carbon Fiber Reinforced Polymers [Volume 33, Issue 5, 2020, Pages 916-922]
-
Hafiz, T. A.
Life Prediction of Carbon Fiber Reinforced Polymers using Time Temperature Shift Factor [Volume 33, Issue 7, 2020, Pages 1340-1346]
-
Hafram, S. M.
Calibrating and Validation Microscopic Traffic Simulation Models VISSIM for Enhanced Highway Capacity Planning [Volume 36, Issue 8, 2023, Pages 1509-1519]
-
Haghgoo, H. R.
An Improved Modular Modeling for Analysis of Closed-Cycle Absorption Cooling Systems [Volume 21, Issue 1, 2008, Pages 57-70]
-
Haghgou, Hamid Reza
Energy and Exergy Evaluation of Multi-channel Photovoltaic/Thermal Hybrid System: Simulation and Experiment [Volume 32, Issue 11, 2019, Pages 1665-1680]
-
Haghgou, H. R.
Extracting Technical Specifications of a Solar Panel Type to Design a 10 MW Hybrid Power Plant [Volume 32, Issue 4, 2019, Pages 562-568]
-
Haghighat, H.
An Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces [Volume 16, Issue 4, 2003, Pages 385-394]
-
Haghighat- Kish, Mohammad
Structure and Properties of a Natural Celulosic Hollow Fiber [Volume 11, Issue 2, 1998, Pages 101-108]
-
Haghighat Namini, Vahab
A MODIFIED COMPRESSIBLE SMOOTHED PARTICLE HYDRODYNAMICS (MCSPH) METHOD AND ITS APPLICATION ON THE NUMERICAL SIMULATION OF LOW AND HIGH VELOCITY IMPACTS [Volume 25, Issue 1, 2012, Pages 45-58]
-
Haghighi, F. R.
Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
-
Haghnevis, Moeed
A Mathematical Model of a Multi-Criteria Parallel Machine Scheduling Problem: a Genetic Algorithm (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 79-86]
-
Haghparast, Payam
Optimization of Heat Transfer Enhancement of a Flat Plate Based on Pareto Genetic Algorithm [Volume 23, Issue 2, 2010, Pages 177-190]
-
Haghparast, Payam
Application of Single Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate [Volume 25, Issue 1, 2012, Pages 67-78]
-
Haghshenas, D. F.
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
-
Haghshenas, D. F.
Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
-
Haghshenas, P.
A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
-
Haghtalab, A.
Thermodynamic Modeling the Solubility of CO2 in Aqua System of Methyldiethanolamine and 2-(2-Aminoethylamino)ethanol Using the Nonelectrolyte Wilson Nonrandom Factor [Volume 33, Issue 12, 2020, Pages 2436-2442]
-
Haghzad Klidbary, S.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Haghzad Klidbary, Sajad
Improvement of LEACH Protocol Based on Genetic Algorithm to Increase the Network Lifetime of Wireless Sensor Network [(Articles in Press)]
-
Haidarie, A.
The Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement [Volume 20, Issue 1, 2007, Pages 83-94]
-
Haidera, F. I
Developing of Corrosion Resistance Nano Copper Oxide Coating on Copper using Anodization in Oxalate solution [Volume 31, Issue 3, 2018, Pages 450-455]
-
Hait, P.
Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
-
Hait, Pritam
Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1388-1394]
-
Hajarian, A.
A New Developed Model to Determine Waste Dump Site Selection in Open Pit Mines: An Approach to Minimize Haul Road Construction Cost [Volume 33, Issue 7, 2020, Pages 1413-1422]
-
Haji, Alireza
Optimum Aggregate Inventory for Scheduling Multi-product Single Machine System with Zero Setup Time [Volume 15, Issue 1, 2002, Pages 41-48]
-
Haji, Rasoul
Optimum Aggregate Inventory in the Lot Scheduling Problem with Non-Zero Setup Time [Volume 3, Issue 3, 1990, Pages 84-89]
-
Haji, Rasoul
Second Moment of Queue Size with Stationary Arrival Processes and Arbitrary Queue Discipline [Volume 6, Issue 1, 1993, Pages 37-44]
-
Haji, Rasoul
Optimum Aggregate Inventory for Scheduling Multi-product Single Machine System with Zero Setup Time [Volume 15, Issue 1, 2002, Pages 41-48]
-
Hajiabadi, A.
Foil Application to Reduce Resistance of Catamaran under High Speeds and Different Operating Conditions [Volume 32, Issue 1, 2019, Pages 106-111]
-
Hajiabbas, Maryam
Encapsulation of Food Components and Bioactive Ingredients and Targeted Release [Volume 33, Issue 1, 2020, Pages 1-11]
-
Hajiaghaei-Keshteli, M.
An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
-
Hajiaghaei-Keshteli, M.
New Approaches in Metaheuristics to Solve the Truck Scheduling Problem in a Cross-docking Center [Volume 31, Issue 8, 2018, Pages 1258-1266]
-
Hajiaghaei-Keshteli, M.
A Collaborative Stochastic Closed-loop Supply Chain Network Design for Tire Industry [Volume 31, Issue 10, 2018, Pages 1715-1722]
-
Hajiaghaei-Keshteli, M.
A Lagrangian Relaxation-based Algorithm to Solve a Home Health Care Routing Problem [Volume 31, Issue 10, 2018, Pages 1734-1740]
-
Hajiaghaei-Keshteli, M.
A Robust Optimization Methodology for Multi-objective Location-transportation Problem in Disaster Response Phase under Uncertainty [Volume 31, Issue 11, 2018, Pages 1953-1961]
-
Hajiaghaei-Keshteli, M.
A Novel Hybrid Whale Optimization Algorithm to Solve a Production-Distribution Network Problem Considering Carbon Emissions [Volume 32, Issue 12, 2019, Pages 1781-1789]
-
Hajiaghaei-Keshteli, M.
New Approaches in Meta-heuristics to Schedule Purposeful Inspections of Workshops in Manufacturing Supply Chains [Volume 33, Issue 5, 2020, Pages 833-840]
-
Hajiaghaei-Keshteli, M.
A Closed-loop Supply Chain Network Design Problem in Copper Industry [Volume 33, Issue 10, 2020, Pages 2008-2015]
-
Hajiaghaei-Keshteli, M.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Hajiaghaei-Keshteli, Mostafa
Addressing the Freight Consolidation and Containerization Problem by Recent and Hybridized Meta-heuristic Algorithms [Volume 30, Issue 3, 2017, Pages 403-410]
-
Hajialigol, Najmeh
Investigation of Air Turbulence Intensity Effect on the Flame Structure in Different Flame Holder Geometry [Volume 26, Issue 12, 2013, Pages 1423-1432]
-
Hajialimohammadi, A.
Cutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys [Volume 33, Issue 6, 2020, Pages 1142-1148]
-
Hajiali Mohammadi, A.
Effects of Ageing and Forging on Short-term Creep Behaviors of Inconel-713C Superalloy at 850 °C [Volume 33, Issue 4, 2020, Pages 639-646]
-
Hajian, M.
Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
-
Hajian Nia, I.
Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
-
Hajihashemi, Vahid
An Adaptive Hierarchical Method Based on Wavelet and Adaptive Filtering for MRI Denoising [Volume 29, Issue 1, 2016, Pages 31-39]
-
Haji Hosseini, Reza
Production of Extracellular Protease and Determination of Optimal Condition by Bacillus Licheniformis BBRC 100053 (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 221-228]
-
Haji Kazemi, H.
Pullout Load Analysis of Reinforced Concrete Anchor Shafts [Volume 6, Issue 2, 1993, Pages 79-86]
-
Haji Kazemi, H.
A Proposed Method to Evaluate Ultimate Resistance of Plate Girders Subjected to Shear and Patch Loading (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 347-356]
-
Haji Kazemi, H.
Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation [Volume 28, Issue 10, 2015, Pages 1423-1429]
-
Haji Khamis, N. H.
Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
-
Hajiloo, Amir
Using Neural Networks and Genetic Algorithms for Modelling and Multi-objective Optimal Heat Exchange through a Tube Bank [Volume 25, Issue 4, 2012, Pages 321-326]
-
Hajipour, Alireza
Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
-
Hajipour, B.
Extracting Technical Specifications of a Solar Panel Type to Design a 10 MW Hybrid Power Plant [Volume 32, Issue 4, 2019, Pages 562-568]
-
Hajipour, Vahid
A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
-
Haji Sheik Mohammed, M. S.
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Hajsadeghi, M.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Haj Seiyed Taghia, S. A.
Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
-
Haj Seiyed Taghia, S. A.
An Economic Approach to the Confinement of Different Concrete Classes with Carbon and Glass Fibers Reinforced Polymers [Volume 36, Issue 4, 2023, Pages 776-787]
-
Haj Seiyed Taghia, S.A
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Hakim, Manoochehr
Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
-
Hakimhashemi, M.
Application of Boundera Element Method (Bem) to Two-Dimensional Poisson's Eqation [Volume 2, Issue 3, 1989, Pages 162-167]
-
Hakimi, A.
Data Consumption Analysis by Two Ordinal Multivariate Control Charts [Volume 35, Issue 11, 2022, Pages 2196-2204]
-
Hakimi, Mohammad
Applying fuzzy UTASTAR for sustainable supplier selection in Iran's construction industry [(Articles in Press)]
-
Halali, Mohammad
Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 263-268]
-
Halali, Mohammad
Leaching Kinetics of Stibnite in Sodium Hydroxide [Volume 27, Issue 2, 2014, Pages 325-332]
-
Haldar, R.
Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
-
Halder, P.
Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution [Volume 35, Issue 8, 2022, Pages 1479-1487]
-
Haleh, H.
A Mathematical Model for Scheduling Elective Surgeries for Minimizing the Waiting Times in Emergency Surgeries [Volume 33, Issue 3, 2020, Pages 448-458]
-
Hallajisani, A.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Hallajisani, A.
Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
-
Halvaeyfar, M. R.
Experimental Study on Bonding CFRP to Fiber Concrete Beam Considering the Effect of using Nanographene Oxide in Improving the Mechanical Properties of Polyamine Resin [Volume 35, Issue 8, 2022, Pages 1524-1532]
-
Hamawand, Ihsan
Effect of colloidal Particles associated with the liquid bridge in sticking during drying in Superheated Steam [Volume 24, Issue 2, 2011, Pages 119-126]
-
Hamedi, M.
Truck Scheduling in a Cross-Docking Terminal by Using Novel Robust Heuristics [Volume 32, Issue 2, 2019, Pages 296-305]
-
Hamedi, M.
Optimization of Rubber Compound Design Process Using Artificial Neural Network and Genetic Algorithm [Volume 33, Issue 11, 2020, Pages 2319-2326]
-
Hamedi Sangari, Alireza
Laboratory Studies on the Effect of Vertical Gravel Column Drains on Liquefaction Potential [Volume 24, Issue 3, 2011, Pages 209-226]
-
Hami, M.
Optimization of a Bi-objective Scheduling for Two Groups of Experienced and Inexperienced Distribution Staff Based on Capillary Marketing [Volume 31, Issue 11, 2018, Pages 1943-1952]
-
Hamid, Arzan Abdul
Performance of Infilled Profiled Steel Sheet Dry Board PSSDB Load Bearing Wall (TECHNICAL NOTE) [Volume 17, Issue 4, 2004, Pages 343-348]
-
Hamidi, A.A.
Mathematical Model For Energy Saving In Induration Of Iron Ore Pellets Containing Solid Fuel [Volume 16, Issue 3, 2003, Pages 265-278]
-
Hamidi, A.A.
Numerical Modeling and Simulation of Highly Preheated and Diluted Air Combustion Furnaces [Volume 22, Issue 2, 2009, Pages 107-118]
-
Hamidi, Alireza
Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
-
Hamidi, H
Analysis and Evaluation of Privacy Protection Behavior and Information Disclosure Concerns in Online Social Networks [Volume 31, Issue 8, 2018, Pages 1234-1239]
-
Hamidi, H
Analyzing Tools and Algorithms for Privacy Protection and Data Security in Social Networks [Volume 31, Issue 8, 2018, Pages 1267-1273]
-
Hamidi, H.
An Efficient Predictive Model for Probability of Genetic Diseases Transmission Using a Combined Model [Volume 30, Issue 8, 2017, Pages 1152-1159]
-
Hamidi, H.
An Architecture for Security and Protection of Big Data [Volume 30, Issue 10, 2017, Pages 1479-1486]
-
Hamidi, H.
Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1856-1862]
-
Hamidi, H.
Analysis and Development of Technology Acceptance Model in Mobile Bank Field [Volume 31, Issue 9, 2018, Pages 1521-1528]
-
Hamidi, H.
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Hamidi, H.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Hamidi, H.
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Hamidi, H.
A New Method for Open Government using of Information Technology [Volume 35, Issue 3, 2022, Pages 493-501]
-
Hamidi, H.
Analyzing Factors Influencing Mobile Social Media Marketing Acceptance among Customers [Volume 35, Issue 6, 2022, Pages 1209-1216]
-
Hamidi, H.
Analysis of Role of Cloud Computing in Providing Internet Banking Services: Case Study Bank Melli Iran [Volume 35, Issue 5, 2022, Pages 1082-1088]
-
Hamidi, H.
A New Mechanism for Detecting Shilling Attacks in Recommender Systems Based on Social Network Analysis and Gaussian Rough Neural Network with Emotional Learning [Volume 36, Issue 2, 2023, Pages 321-334]
-
Hamidi, H.
A Framework for Analysis of Predictors of Mobile-marketing Use by Expanding Unified Theory of Acceptance and Use of Technology and Artificial Neural Networks [Volume 36, Issue 5, 2023, Pages 1012-1022]
-
Hamidi, H.
A Model for Scheduling of Electric Vehicles Charging in a Distribution Network using Multi-agent Model [Volume 37, Issue 2, 2024, Pages 402-411]
-
Hamidi, H.
Presenting a Model to Detect the Fraud in Banking using Smart Enabling Tools [Volume 37, Issue 3, 2024, Pages 529-537]
-
Hamidi, H.
A Model for Analysis of Social Media in Adoption of Mobile Banking [Volume 37, Issue 7, 2024, Pages 1384-1394]
-
Hamidi, HOJAT
Analysis of a Framework for E-Commerce Consumer Behavior before and During Covid-19 [(Articles in Press)]
-
Hamidi, Hojatollah
Using a Data Mining Tool and FP-Growth Algorithm Application for Extraction of the Rules in two Different Dataset (TECHNICAL NOTE) [Volume 29, Issue 6, 2016, Pages 788-796]
-
Hamidi, Hojatollah
Analysis of Pre-processing and Post-processing Methods and Using Data Mining to Diagnose Heart Diseases [Volume 29, Issue 7, 2016, Pages 921-930]
-
Hamidi, Hojatollah
Improvement of Navigation Accuracy using Tightly Coupled Kalman Filter [Volume 30, Issue 2, 2017, Pages 215-223]
-
Hamidieh, A
A New Combination of Robust-possibilistic Mathematical Programming for Resilient Supply Chain Network under Disruptions and Uncertainty: A Real Supply Chain (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 612-621]
-
Hamidieh, A
A Robust Reliable Closed Loop Supply Chain Network Design under Uncertainty: A Case Study in Equipment Training Centers [Volume 31, Issue 4, 2018, Pages 648-658]
-
Hamidieh, A.
A Robust Reliable Forward-reverse Supply Chain Network Design Model under Parameter and Disruption Uncertainties [Volume 30, Issue 8, 2017, Pages 1160-1169]
-
Hamidi Jamnani, Hamed
The Effect of Analysis Methods on the Response of Steel Dual-System Frame Buildings for Seismic Retrofitting [Volume 22, Issue 4, 2009, Pages 317-331]
-
Hamidon, R.
Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes [Volume 36, Issue 11, 2023, Pages 2004-2014]
-
Hammachukiattikul, P.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Hammou, A. D.
Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
-
Hamta, Nima
Single Machine Scheduling Problem with Precedence Constraints and Deteriorating Jobs [Volume 24, Issue 2, 2011, Pages 115-122]
-
Hamzah, M. S.
Synthesis of Silica Nanoparticles from Silica Sand via Vibration Assisted Alkaline Solution Method [Volume 35, Issue 7, 2022, Pages 1300-1306]
-
Hamzah, S.
Study on the Application of Sustainable Construction in the Development of the Likupang Special Economic Zone [Volume 36, Issue 1, 2023, Pages 50-59]
-
Hamzeh, S.
a Comparative Theoretical Analysis for a Knitted Loop Model [Volume 12, Issue 1, 1999, Pages 39-44]
-
Han, L.
Rolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm [Volume 32, Issue 1, 2019, Pages 121-126]
-
Han, Qiang
Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
-
Hanaii, Kazem
Production of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE) [Volume 26, Issue 7, 2013, Pages 713-720]
-
Hanamasagar, Mahantesh M
Unconfined Compressive Strength of Cement Stabilized Soil Using Industrial Wastes Including Optimization of Polypropylene Fiber [(Articles in Press)]
-
Handayani, A. P.
Utilizing Semi-Variograms and Geostatistical Approach for Land Value Model in Urban Region [Volume 36, Issue 12, 2023, Pages 2222-2231]
-
Handikherkar, V. C.
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Hanifah, S.
Digital Assistant for Pharmacists Using Indonesian Language Based on Rules and Artificial Intelligence [Volume 37, Issue 9, 2024, Pages 1746-1754]
-
Hanish, H. H. H
The Effect of Transition Metals Incorporation on the Structural and Magnetic Properties of Magnesium Oxide Nanoparticles [Volume 33, Issue 4, 2020, Pages 647-656]
-
Hanna, A.
Failure Process of Stone Columns in Collapsible Soils [Volume 21, Issue 2, 2008, Pages 135-142]
-
Hanna, A.
ASSESSEMENT OF SOIL COLLAPSE PREDICTION METHODS [Volume 25, Issue 1, 2012, Pages 19-26]
-
Haque, F.
Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
-
Haque, M.T.
Dynamic Compensation of Electrical Power Systems Using Multilevel Voltage Source Inverter [Volume 14, Issue 3, 2001, Pages 215-228]
-
Haque, M.T.
A New Strategy for Simultaneous Compensation of Instantaneous Reactive Power and Harmonics of Non-Linear Loads (RESEARCH NOTE) [Volume 14, Issue 4, 2001, Pages 333-338]
-
Harahap, H
Isolationand Characterization of Nanocrystal from Corncob Waste Using H2SO4 Hydrolysis Method (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 533-537]
-
Harati, Mohammadali
Laminar Flame Speed Prediction in Lean Mixture of Aluminum Dust Clouds by Considering the Effect of Random Distribution of Particles in Two-dimension [Volume 29, Issue 2, 2016, Pages 246-254]
-
Harbouche, Y.
Improvement Performances of Active and Reactive Power Control Applied to DFIG for Variable Speed Wind Turbine Using Sliding Mode Control and FOC [Volume 31, Issue 10, 2018, Pages 1689-1697]
-
Hardi Purba, H.
Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle [Volume 33, Issue 11, 2020, Pages 2245-2251]
-
Harifi, A.
Cost-based Risk Approach for Spinning Reserve Assessment in Bulk Power Systems [Volume 35, Issue 11, 2022, Pages 2186-2195]
-
Hari Krishna, E.
Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
-
Harimi, Ali
A Database for Automatic Persian Speech Emotion Recognition: Collection, Processing and Evaluation [Volume 27, Issue 1, 2014, Pages 79-90]
-
Hari Mulyadi, I
Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
-
Harini, E.
Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
-
Harish, T.
Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
-
Harounabadi, A.
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Harsej, F.
Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
-
Hartadi, B. S.
Discrimination of Plastic Waste using Laser-induced Breakdown Spectroscopy-principal Component Analysis: Highlighting Molecular LIBS [Volume 36, Issue 1, 2023, Pages 98-107]
-
Harun, Z
Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
-
Harun, Z
Preliminary Characterization of Corn Cob Ash as an Alternative Material for Ceramic Hollow Fiber Membrane (CHFM/CCA) [Volume 31, Issue 8, 2018, Pages 1389-1397]
-
Harun, Z
Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
-
Harun, Z
The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
-
Haryanto, W
Seismicity of Batubesi Dam at Sorowako Region Based on Earthquake Data and Microtremor Measurement [Volume 31, Issue 8, 2018, Pages 1180-1186]
-
Hasan, C. Z. C
Vertical Ground Reaction Force Gait Patterns During Walking in Children with Autism Spectrum Disorders [Volume 31, Issue 5, 2018, Pages 705-711]
-
Hasan, H.
An Analysis on Performance of Pico-hydro with Archimedes Screw Model Viewed from Turbine Shaft Angle [Volume 36, Issue 1, 2023, Pages 10-18]
-
Hasan, Mohammad Nasim
Natural Convection Heat Transfer within Octagonal Enclosure [Volume 23, Issue 1, 2010, Pages 1-10]
-
Hasan, Q. A.
A Numerical Study to Investigate Shear Behavior of High-strength Concrete Beams Externally Retrofitted with Carbon Fiber Reinforced Polymer Sheets [Volume 36, Issue 11, 2023, Pages 2112-2123]
-
Hasan Ghasemi, M.
Design and Evaluation a New Type of Semi-active Lower Limb with Knee Joint Booster [Volume 37, Issue 5, 2024, Pages 842-851]
-
Hasani, A.
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Hasani, Aliakbar
Comprehensive Decision Modeling of Reverse Logistics System: A Multi-criteria Decision Making Model by using Hybrid Evidential Reasoning Approach and TOPSIS (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 922-931]
-
Hasani, Aliakbar
A Hybrid Meta-heuristic for the Dynamic Layout Problem with Transportation System Design [Volume 28, Issue 8, 2015, Pages 1175-1185]
-
Hasani, S. M.
Active Noise Cancellation using Online Wavelet Based Control System: Numerical and Experimental Study [Volume 30, Issue 1, 2017, Pages 120-126]
-
Hasani Baferani, Abolfazl
On Symmetric and Asymmetric Buckling Modes of Functionally Graded Annular Plates under Mechanical and Thermal Loads [Volume 26, Issue 4, 2013, Pages 433-446]
-
Hasannasab, P.
A Numerical Simulation of Vanadium Redox Flow Batteries [Volume 32, Issue 1, 2019, Pages 153-161]
-
Hasanpour, H.
Accelerating Legislation Processes through Semantic Similarity Analysis with BERT-based Deep Learning [Volume 37, Issue 6, 2024, Pages 1050-1058]
-
Hasanpour, S.
Numerical Analysis on Flow Characteristics of Gas-liquid Two-phase Flow in a Vertical Pipe with Downward Stream [Volume 36, Issue 3, 2023, Pages 540-547]
-
Hasanzadeh, Omolbanin
Chemical Composition, Antibacterial and Analgesic Activity of Lavandula stoechas Flowers from North of Iran [Volume 32, Issue 8, 2019, Pages 1065-1073]
-
Hasanzadeh, R
The Effects of Newmark Method Parameters on Errors in Dynamic Extended Finite Element Method Using Response Surface Method [Volume 31, Issue 1, 2018, Pages 50-57]
-
Hasanzadeh, R
Tensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes [Volume 31, Issue 3, 2018, Pages 504-510]
-
Hasanzadeh, R
Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
-
Hasanzadeh, R.
The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 807-813]
-
Hasanzadeh, R.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Hasanzadeh, Reza PR
A Novel Method for Tracking Moving Objects using Block-Based Similarity [Volume 22, Issue 1, 2009, Pages 35-42]
-
Hasanzadeh, Rezgar
The Study of Deep Drawing of Brass-steel Laminated Sheet Composite Using Taguchi Method [Volume 29, Issue 1, 2016, Pages 103-108]
-
Hasanzadeh, Rezgar
Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
-
Hasanzadeh, R. P. R.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Hasanzadeh Afrouzi, Hamaid
Dispersion and Deposition of Micro Particles over Two Square Obstacles in a Channel via Hybrid Lattice Boltzmann Method and Discrete Phase model [Volume 25, Issue 3, 2012, Pages 257-266]
-
Hashemi, M.
Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
-
Hashemi, M.
The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
-
Hashemi, M.
Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
-
Hashemi, M.
The Effect of Using Reinforced Granular Blanket and Single Stone Column on Improvement of Sandy Soil: Experimental Study [Volume 36, Issue 8, 2023, Pages 1532-1547]
-
Hashemi, Mohammad Jafar
Flexural Behavior of Polyester Polymer Concrete Subjected to Different Chemicals [Volume 28, Issue 7, 2015, Pages 978-983]
-
Hashemi, M.R.
Biomechanical Responses to Experimental open Spinal Cord Injury [Volume 2, Issue 1, 1989, Pages 71-77]
-
Hashemi, S.
A New Approach for Buckling and Vibration Analysis of Cracked Column. [Volume 21, Issue 3, 2008, Pages 225-230]
-
Hashemi, S.
Application of Random Radial Point Interpolation Method to Foundations Bearing Capacity Considering Progressive Failure [Volume 36, Issue 2, 2023, Pages 264-275]
-
Hashemi, S. A
Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran [Volume 31, Issue 8, 2018, Pages 1292-1301]
-
Hashemi, Seyed Abdolmehdi
Investigation of Air Turbulence Intensity Effect on the Flame Structure in Different Flame Holder Geometry [Volume 26, Issue 12, 2013, Pages 1423-1432]
-
Hashemi, Seyyed Mohammad Ali
Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation [Volume 28, Issue 10, 2015, Pages 1423-1429]
-
Hashemi, S. J.
An Efficient Algorithm for General 3D-Seismic Body Waves (SSP and VSP Applications) [Volume 18, Issue 4, 2005, Pages 401-412]
-
Hashemi, S. J.
Shear-Wave Dynamic Behavior using Two Different Orientations [Volume 20, Issue 3, 2007, Pages 293-300]
-
Hashemi, S. J.
Experimental Study on Warm Incremental Tube Forming of AA6063 Aluminum Tubes [Volume 33, Issue 9, 2020, Pages 1773-1779]
-
Hashemi, S. K.
The Post-fire Behavior of Lightweight Structural Concrete is Improved by Nano-SiO2 and Steel Fibers [Volume 36, Issue 11, 2023, Pages 1942-1960]
-
Hashemi, S. M.
Soft Computing-based New Interval-valued Pythagorean Triangular Fuzzy Multi-criteria Group Assessment Method without Aggregation: Application to a Transport Projects Appraisal [Volume 32, Issue 5, 2019, Pages 737-746]
-
Hashemi, S. M. R.
Pain Facial Expression Recognition from Video Sequences Using Spatio-temporal Local Binary Patterns and Tracking Fiducial Points [Volume 33, Issue 5, 2020, Pages 1038-1047]
-
Hashemi, S.M.R.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Hashemi, SY
Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 554-563]
-
Hashemian, Farzam
Electrical Energy Management in Industrial Wastewater Treatment Plant [Volume 32, Issue 9, 2019, Pages 1269-1276]
-
Hasheminejad, S. M.
Performance Analysis of a Novel Three-phase Axial Flux Switching Permanent Magnet Generator with Overlapping Concentrated Winding [Volume 32, Issue 2, 2019, Pages 286-295]
-
Hasheminejad, S. M.
Extracting Technical Specifications of a Solar Panel Type to Design a 10 MW Hybrid Power Plant [Volume 32, Issue 4, 2019, Pages 562-568]
-
Hashemipour, O.
A Very Low Voltage 9th Order Linear Phase Baseband Switched Capacitor Filter (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 19-24]
-
Hashemipour, O.
A New Hybrid Brushless DC Motor/Generator without Permanent Magnet [Volume 20, Issue 1, 2007, Pages 77-86]
-
Hashemipour, O.
High Speed Full Swing Current Mode BiCMOS Logical Operators [Volume 20, Issue 3, 2007, Pages 211-220]
-
HashemiRafsanjani, S.H.
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Hashemi Shahraki, B.
The Development and Validation of New Equations for Prediction of the Performance of Tangential Cyclones [Volume 16, Issue 2, 2003, Pages 109-124]
-
Hashemoghli, Arash
A Novel Interactive Possibilistic Mixed Integer Nonlinear Model for Cellular Manufacturing Problem under Uncertainty [Volume 30, Issue 3, 2017, Pages 384-392]
-
Hashemolhoseini, H.
Prediction of Instability in Planar Anisotropic Sheet Metal Forming Processes [Volume 14, Issue 1, 2001, Pages 69-80]
-
Hashemolhoseini, H.
A Parametric Study of the Behavior of Geosynthetic Reinforced Soil Slopes [Volume 18, Issue 4, 2005, Pages 371-389]
-
Hashempour, M.
Investigation of Mechanical Properties of Self Compacting Polymeric Concrete with Backpropagation Network [Volume 31, Issue 6, 2018, Pages 903-909]
-
Hashempour, M.
The Efficiency of Hybrid BNN-DWT for Predicting the Construction and Demolition Waste Concrete Strength [Volume 33, Issue 8, 2020, Pages 1544-1552]
-
Hashempour, M.
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Hashempour, M.
Numerical Modeling of Sediment-flow around Obstacle Inspired by Marine Sponges: Considering Body Configurations [Volume 36, Issue 6, 2023, Pages 1066-1074]
-
Hashempour, N.
Low Embodied Carbon and Energy Materials in Building Systems: A Case Study of Reinforcing Clay Houses in Desert Regions [Volume 36, Issue 8, 2023, Pages 1409-1428]
-
Hashemzadeh, Elnaz
Using a Data Mining Tool and FP-Growth Algorithm Application for Extraction of the Rules in two Different Dataset (TECHNICAL NOTE) [Volume 29, Issue 6, 2016, Pages 788-796]
-
Hashim, A. M.
Structural Behavior of Reinforced Concrete Horizontally Curved Box Beam with Opening [Volume 35, Issue 4, 2022, Pages 774-783]
-
Hashim Al Quraishi, M.
A Novel Methodology for Predicting Roadway Deterioration in Iraq [Volume 36, Issue 1, 2023, Pages 41-49]
-
Hasibi, H.
Modified Particle Swarm Optimization-Artificial Neural Network and Gene Expression Programing for Predicting High Temperature Oxidation Behavior of Ni–Cr–W-Mo Alloys [Volume 33, Issue 11, 2020, Pages 2327-2338]
-
Hasim, A. H.
Calibrating and Validation Microscopic Traffic Simulation Models VISSIM for Enhanced Highway Capacity Planning [Volume 36, Issue 8, 2023, Pages 1509-1519]
-
Hasnain Isa, M.
Equilibrium and Kinetic Studies on Lead (II) Adsorption by Sugarcane Bagasse Derived Activated Carbon (TECHNICAL NOTE) [Volume 30, Issue 11, 2017, Pages 1647-1653]
-
Hasnain Isa, M.
Further Study of Adsorption of Crude Oils onto Acetylated Corn Silk and its Kinetics and Equilibrium Isotherm [Volume 32, Issue 2, 2019, Pages 229-235]
-
Hassan, Ahmed
Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
-
Hassan, M. I
Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique [Volume 31, Issue 8, 2018, Pages 1302-1307]
-
Hassan, Q. A.
Experimental and Numerical Investigation of the Impact of Basalt Fibers and Tie Spacing on Short Concrete Column Behavior [Volume 36, Issue 7, 2023, Pages 1287-1299]
-
Hassan, Suhaimi Bin
Heat Transfer Coefficients Investigation for TiO2 Based Nanofluids [Volume 32, Issue 10, 2019, Pages 1491-1496]
-
Hassan Ghasemi, Mohammad
Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
-
Hassan Ghasemi, Mohammad
A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
-
Hassani, A.
A Numerical Modeling of a Variable Conductance Thermosyphon by Use of a Binary Mixture [Volume 15, Issue 4, 2002, Pages 373-382]
-
Hassani, Maryam
A Two-step Catalytic Production of Biodiesel from Waste Cooking Oil [Volume 26, Issue 6, 2013, Pages 563-570]
-
Hassani, Maryam
The Possibility of using Flat Plate Solar Collector Based on the Best Calculated Tilt Angle in the City of Rasht as a Case Study (TECHNICAL NOTE) [Volume 27, Issue 8, 2014, Pages 1297-1306]
-
Hassani, Messaoud
Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
-
Hassani, R.
The Investigation of Subsidence Effect on Buried Pipes in 3D Space [Volume 30, Issue 8, 2017, Pages 1182-1189]
-
Hassani Joshaghani, A.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Hassani Joshaghani, A.
Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
-
Hassani Joshaghani, A.
Experimental Study on Bonding CFRP to Fiber Concrete Beam Considering the Effect of using Nanographene Oxide in Improving the Mechanical Properties of Polyamine Resin [Volume 35, Issue 8, 2022, Pages 1524-1532]
-
Hassani Joshaghani, Ali
Using Experimental Design to Optimize the Photo-degradation of P-Nitro Toluene by Nano-TiO2 in Synthetic Wastewater [Volume 32, Issue 8, 2019, Pages 1074-1081]
-
Hassanjani-Roshan, A.
Investigating the Effect of Ultrasound Intensity on the Magnetic Properties of Magnetite Nanostructures Synthesized by Sonochemical Method [Volume 36, Issue 6, 2023, Pages 1034-1039]
-
Hassanpour, H
Improving Super-resolution Techniques via Employing Blurriness Information of the Image [Volume 31, Issue 2, 2018, Pages 241-249]
-
Hassanpour, H.
Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
-
Hassanpour, H.
A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
-
Hassanpour, H.
Behavioral Analysis of Traffic Flow for an Effective Network Traffic Identification [Volume 30, Issue 11, 2017, Pages 1740-1745]
-
Hassanpour, H.
A New High Frequency Grid Impedance Estimation Technique for the Frequency Range of 2 to150 kHz [Volume 31, Issue 10, 2018, Pages 1666-1674]
-
Hassanpour, H.
Adaptive Image Dehazing via Improving Dark Channel Prior [Volume 32, Issue 2, 2019, Pages 249-255]
-
Hassanpour, H.
Feature Selection for Small Sample Sets with High Dimensional Data Using Heuristic Hybrid Approach [Volume 33, Issue 2, 2020, Pages 213-220]
-
Hassanpour, H.
Super-resolution of Defocus Blurred Images [Volume 33, Issue 4, 2020, Pages 539-545]
-
Hassanpour, H.
A Multilayer Motion Direction Based Model for Tracking Vehicles at Intersections [Volume 33, Issue 10, 2020, Pages 1939-1950]
-
Hassanpour, H.
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Hassanpour, H.
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Hassanpour, H.
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Hassanpour, H.
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Hassanpour, H.
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Hassanpour, H.
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Hassanpour, H.
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Hassanpour, H.
Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
-
Hassanpour, H.
Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
-
Hassanpour, H.
Election Prediction Based on Messages Feature Analysis in Twitter Social Network [Volume 36, Issue 6, 2023, Pages 1179-1184]
-
Hassanpour, H.
Feature Extraction from Several Angular Faces Using a Deep Learning Based Fusion Technique for Face Recognition [Volume 36, Issue 8, 2023, Pages 1548-1555]
-
Hassanpour, Hamid
Design and Implementation of a Software System for Detecting Orthographical or Morphological Errors in Persian Words [Volume 20, Issue 2, 2007, Pages 127-132]
-
Hassanpour, Hamid
Newborn EEG Seizure Detection Based on Interspike Space Distribution in the Time-Frequency Domain [Volume 20, Issue 2, 2007, Pages 137-146]
-
Hassanpour, Hamid
Image Restoration Using A PDE-Based Approach [Volume 20, Issue 3, 2007, Pages 225-236]
-
Hassanpour, Hamid
A Robust Feedforward Active Noise Control System with a Variable Step-Size FxLMS Algorithm: Designing a New Online Secondary Path Modelling Method [Volume 21, Issue 3, 2008, Pages 231-242]
-
Hassanpour, Hamid
Controlling Common-Mode Voltages in Multilevel Inverters [Volume 21, Issue 3, 2008, Pages 243-254]
-
Hassanpour, Hamid
An Optimized Online Secondary Path Modeling Method for Single-Channel Feedback ANC Systems [Volume 22, Issue 1, 2009, Pages 1-12]
-
Hassanpour, Hamid
Adaptive Segmentation with Optimal Window Length Scheme using Fractal Dimension and Wavelet Transform [Volume 22, Issue 3, 2009, Pages 257-268]
-
Hassanpour, Hamid
An Improved Pixon-Based Approach for Image Segmentation [Volume 24, Issue 1, 2011, Pages 25-35]
-
Hassanpour, Hamid
Image Quality Enhancement Using Pixel Wise Gamma Correction [Volume 24, Issue 4, 2011, Pages 301-312]
-
Hassanpour, Hamid
Boosting Passage Retrieval through Reuse in Question Answering [Volume 25, Issue 3, 2012, Pages 187-196]
-
Hassanpour, Hamid
Investigating Embedded Question Reuse in Question Answering [Volume 26, Issue 3, 2013, Pages 245-256]
-
Hassanpour, Hamid
Image Enhancement via Reducing Impairment Effects on Image Components [Volume 26, Issue 11, 2013, Pages 1267-1274]
-
Hassanpour, Hamid
Image Zooming using Non-linear Partial Differential Equation [Volume 27, Issue 1, 2014, Pages 15-28]
-
Hassanpour, Hamid
Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
-
Hassanpour, Hamid
An Improved Automatic EEG Signal Segmentation Method based on Generalized Likelihood Ratio [Volume 27, Issue 7, 2014, Pages 1015-1022]
-
Hassanpour, Hamid
Image Denoising Using Anisotropic Diffusion Equations on Reflection and illumination Components of Image [Volume 27, Issue 9, 2014, Pages 1339-1348]
-
Hassanpour, Hamid
Improving Dark Channel Prior for Single Image Dehazing [Volume 28, Issue 6, 2015, Pages 880-887]
-
Hassanpour, Hamid
People Re-identification in Non-overlapping Field-of-views using Cumulative Brightness Transform Function and Body Segments in Different Color Spaces [Volume 28, Issue 12, 2015, Pages 1711-1719]
-
Hassanpour, Hamid
A Geometric View of Similarity Measures in Data Mining [Volume 28, Issue 12, 2015, Pages 1728-1737]
-
Hassanpour, Hamid
Deblocking Joint Photographic Experts Group Compressed Images via Self-learning Sparse Representation [Volume 29, Issue 12, 2016, Pages 1684-1690]
-
Hassanpour, Hamid
A Novel Image Structural Similarity Index Considering Image Content Detectability Using Maximally Stable Extremal Region Descriptor [Volume 30, Issue 2, 2017, Pages 172-181]
-
Hassanpour, Hamid
Cycle Time Optimization of Processes Using an Entropy-Based Learning for Task Allocation [Volume 32, Issue 8, 2019, Pages 1090-1100]
-
Hassanpour, Korosh
The Effect of Normal Anisotropy on Thin-Walled Tube Bending [Volume 26, Issue 1, 2013, Pages 83-90]
-
Hassanpour, M.
Learning Document Image Features With SqueezeNet Convolutional Neural Network [Volume 33, Issue 7, 2020, Pages 1201-1207]
-
Hassanpour, P.
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Hassanzadeh, A.
HYREP: A Hybrid Low-Power Protocol for Wireless Sensor Networks [Volume 32, Issue 4, 2019, Pages 519-527]
-
Hassanzadeh, Alireza
The Effects of Excitation Signal on the Resolution of the Liquid Crystal Capacitive Chemical and Biological Sensors [Volume 26, Issue 11, 2013, Pages 1275-1280]
-
Hassanzadeh, M. R.
A Novel Technique on the Analytical Calculation of Open-Circuit Flux Density Distribution in Brushless Permanent-Magnet Motor [Volume 17, Issue 1, 2004, Pages 51-58]
-
Hassanzadeh, Y.
Rapidly Varied Unsteady Flow in a Small Scale Dry Bed Model [Volume 10, Issue 1, 1997, Pages 1-10]
-
Hassanzadeh Nemati, N.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Hassanzadeh Nemati, N.
Study on Polycaprolactone Coated Hierarchical Meso/ Macroporous Titania Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1887-1894]
-
Hassanzadeh Nemati, Nahid
Characterization of Constrained Aged Niti Strips for Using In Artificial Muscle Actuators (Technical Note) [Volume 24, Issue 4, 2011, Pages 321-330]
-
Hassanzadeh Nemati, Nahid
Effect of Dual Releasing of β-glycerophosphate and Dexamethasone from Ti Nanostructured Surface for Using in Orthopedic Applications [Volume 32, Issue 10, 2019, Pages 1337-1344]
-
Hassanzadeh Nemati, Nahid
Synthesis and Characterization of Highly Porous TiO2 Scaffolds for Bone Defects [Volume 33, Issue 1, 2020, Pages 134-140]
-
Hassanzadeh Saraei, S.
Effects of Triple Injection Strategies on Performance and Pollutant Emissions of a DI Diesel Engine Using CFD Simulation [Volume 31, Issue 6, 2018, Pages 973-979]
-
Hassen, W.
Numerical Study of Pure Electroconvection and Combined Electro-thermo-convection in Horizontal Channels [Volume 30, Issue 8, 2017, Pages 1270-1278]
-
Hassim, S.
A Newly Developed Laboratory Slab Roller Compactor (Turamesin): An Overview [Volume 21, Issue 2, 2008, Pages 133-142]
-
Hassoon, A.
Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
-
Hasyim, S.
Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
-
Hatami, Tahmasb
Application of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 667-674]
-
Hatefi, Seyed Morteza
A Common Weight Multi-criteria Decision analysis-data Envelopment Analysis Approach with Assurance Region for Weight Derivation from Pairwise Comparison Matrices [Volume 28, Issue 12, 2015, Pages 1746-1755]
-
Hatif Obaid, A.
Experimental Investigation of Brick-Slabs: Evaluation of the Performance and Ductility of Various Brick Materials [Volume 36, Issue 9, 2023, Pages 1636-1644]
-
Hayal, A. L.
Collapse Problem Treatment of Gypseous Soil by Nanomaterials [Volume 33, Issue 9, 2020, Pages 1737-1742]
-
Hazeghian, M.
Direct Shear Tests on Soft Clay Reinforced with Single Ordinary Granular Column: Discrete Element-Finite Difference Method [Volume 37, Issue 9, 2024, Pages 1790-1799]
-
Hazmo, N. H. W
Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation [Volume 31, Issue 8, 2018, Pages 1446-1454]
-
Hazrati Dorigh, B.
Non-destructive Corrosion Monitoring of Reinforced Concrete Steel Rebars in Chloride Media by Smartphone Magnetic and Analog Hall-Effect Sensors [Volume 36, Issue 9, 2023, Pages 1626-1635]
-
He, W.
Mechanical Properties of Irregular Fiber (Invited Review Paper) [Volume 16, Issue 1, 2003, Pages 99-108]
-
He, W.
Modeling the Tensile Behavior of Fibers with Geometrical and Structural Irregularities [Volume 16, Issue 4, 2003, Pages 393-412]
-
Hebbir, N.
Numerical Study of Twin Jets Interactions using Realizable Model [Volume 35, Issue 3, 2022, Pages 544-551]
-
Hedayatnasab, A.
Retrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets [Volume 33, Issue 5, 2020, Pages 770-783]
-
Hedayatnasab, A.
Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
-
Hedjazi, J.
Improvement of Collapsibility of Sodium Silicate Bonded Cores for Aluminium Casting [Volume 2, Issue 3, 1989, Pages 128-131]
-
Heeralal, M.
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Heidari, A.
Controllable Synthesis of Flower-Like ZnO Nanostructure with Hydrothermal Method (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 283-290]
-
Heidari, A.
Investigation of Mechanical Properties of Self Compacting Polymeric Concrete with Backpropagation Network [Volume 31, Issue 6, 2018, Pages 903-909]
-
Heidari, A.
The Efficiency of Hybrid BNN-DWT for Predicting the Construction and Demolition Waste Concrete Strength [Volume 33, Issue 8, 2020, Pages 1544-1552]
-
Heidari, A.
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Heidari, Ali
Continuous Discrete Variable Optimization of Structures Using Approximation Methods [Volume 17, Issue 3, 2004, Pages 227-242]
-
Heidari, Ali
Approximate Dynamic Analysis of Structures for Earthquake Loading Using FWT [Volume 20, Issue 1, 2007, Pages 37-47]
-
Heidari, G.
A Novel Fuzzy and Artificial Neural Network Representation of Overcurrent Relay Characteristics [Volume 16, Issue 3, 2003, Pages 233-246]
-
Heidari, Golnaz
Microwave Ultrasound Assisted Extraction: Determination of Quercetin for Antibacterial and Antioxidant Activities of Iranian Propolis [Volume 32, Issue 8, 2019, Pages 1057-1064]
-
Heidari, Hassan
Optimal Reconfiguration of Solar Photovoltaic Arrays Using a Fast Parallelized Particle Swarm Optimization in Confront of Partial Shading [Volume 32, Issue 8, 2019, Pages 1177-1185]
-
Heidari, M
A Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls [Volume 31, Issue 2, 2018, Pages 220-227]
-
Heidari, M.
Fault Detection of Bearings Using a Rule-based Classifier Ensemble and Genetic Algorithm [Volume 30, Issue 4, 2017, Pages 604-609]
-
Heidari, M.
Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
-
Heidari, Masuod
A New Method for Root Detection in Minirhizotron Images: Hypothesis Testing Based on Entropy-Based Geometric Level Set Decision [Volume 27, Issue 1, 2014, Pages 91-100]
-
Heidari, Sara
Hexadecyl Trimethyl Ammonium Bromide-Modified Montmorillonite as a Low-Cost Sorbent for the Removal of Methyl Red from Liquid-Medium [Volume 29, Issue 1, 2016, Pages 60-67]
-
Heidarinejad, Ghassem
Direct Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers [Volume 13, Issue 3, 2000, Pages 33-50]
-
Heidarinejad, Ghassem
Numerical Simulation of the Wake Flow Behind an Ellipse using Random Vortex Method (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 183-192]
-
Heidarinejad, Ghassem
The Effect of Geometrical Characteristics of Desiccant Wheel on its Performance [Volume 22, Issue 1, 2009, Pages 63-75]
-
Heidarinejad, Ghassem
Simulation of Premixed Combustion Flow around Circular Cylinder using Hybrid Random Vortex [Volume 24, Issue 3, 2011, Pages 269-278]
-
Heidari-Rarani, M.
Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
-
Heidarzadeh, M.
An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
-
Heidarzadeh Souraki, F.
A Robust Optimization Methodology for Multi-objective Location-transportation Problem in Disaster Response Phase under Uncertainty [Volume 31, Issue 11, 2018, Pages 1953-1961]
-
Heidarzad Moghaddam, H.
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Hejazi, Rezvan
Conceptual Design of Sustainable Outsourcing with Balanced Scorecard Using Analytic Hierarchy Process: A Case Study for Fajr Jam Gas Refining Company [Volume 33, Issue 1, 2020, Pages 112-123]
-
Hejazi, S.
Immobilization of Laccase from Trametes hirsuta onto CMC Coated Magnetic Nanoparticles [Volume 33, Issue 4, 2020, Pages 513-519]
-
Hejazi, S. R.
First Integrals of a Special System of Odes (TECHNICAL NOTE) [Volume 21, Issue 4, 2008, Pages 375-383]
-
Hekmati, A.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Hemalatha, G
Seismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE) [Volume 32, Issue 11, 2019, Pages 1543-1547]
-
Hemalatha, G.
Experimental Investigation of Toughness Enhancement in Cement Mortar [Volume 31, Issue 11, 2018, Pages 1824-1829]
-
Hemalatha, G.
Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
-
Hemalatha, G.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Hemalatha, G.
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Hemalatha, G.
Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
-
Hemati, HamidReza
A Hybrid Machine Learning Method for Intrusion Detection [Volume 29, Issue 9, 2016, Pages 1242-1246]
-
Hematian, J.
Appropriate Loading Techniques in Finite Element Analysis of Underground Structures [Volume 11, Issue 1, 1998, Pages 43-52]
-
Hemayati, M.
A Boundary Elements and Particular Integrals Implementation for Thermoelastic Stress Analysis [Volume 15, Issue 2, 2002, Pages 197-204]
-
Herliansyah, M. K.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Herliansyah, M. K.
Synthesis of Hydroxyapatite Bioceramic from Cuttlefish Shell Waste and Coral Using Microwave Hydrothermal [Volume 37, Issue 9, 2024, Pages 1755-1762]
-
Herliansyah, Muhammad Kusumawan
Influence of Concentration of Copper Electrolyte, Voltage, and Time of Electroforming on Conductive Acrylonitrile Butadiene Styrene Parts on Deposition Rate and Microstructure [(Articles in Press)]
-
Herliansyah, Muhammad Kusumawan
Development of Lean Implementation Framework for Indonesian Batik Small and Medium-Sized Enterprises [(Articles in Press)]
-
Hermadi, I.
Blockchain-based Traceability System for Indonesian Coffee Digital Business Ecosystem [Volume 36, Issue 5, 2023, Pages 879-893]
-
Hernadewita, H.
Identifying Tools and Methods for Risk Identification and Assessment in Construction Supply Chain [Volume 33, Issue 7, 2020, Pages 1311-1320]
-
Hernandi, A.
Utilizing Semi-Variograms and Geostatistical Approach for Land Value Model in Urban Region [Volume 36, Issue 12, 2023, Pages 2222-2231]
-
Hesari, F. A.
Transmission Electron Microscopy Sample Preparation of INCONEL 738 Nickel-Base Superalloy [Volume 32, Issue 6, 2019, Pages 852-859]
-
Hesarian, M. S.
Neuro-fuzzy Modelling and Experimental Study of the Physiological Comfort of Green Cotton Fabric Based on Yarn Properties [Volume 33, Issue 12, 2020, Pages 2443-2449]
-
Hessam, K.
Influence of Altitude Atmospheric Pressure on Octane Requirement (RESEARCH NOTE). [Volume 4, Issue 3, 1991, Pages 149-152]
-
Hessam, K.
The Role of Aldehydes as Degenerate Branching Intermediate in the Oxidation of Hydrocarbons [Volume 7, Issue 2, 1994, Pages 61-74]
-
Hessam, K.
The Gas Phase Oxidation of Acetaldehyde Reaction Mechanism and Kinetics [Volume 8, Issue 1, 1995, Pages 1-22]
-
Hessampour, karim
Dimensionality Reduction and Improving the Performance of Automatic Modulation Classification using Genetic Programming (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 709-714]
-
Hessari, F. A.
The Role of Partial Internal Wetting in Hysteresis Behavior of Catalyst Pellet [Volume 14, Issue 2, 2001, Pages 143-154]
-
Hessari, F. A.
Behavior of Packed Bed Thermal Storage [Volume 17, Issue 2, 2004, Pages 181-192]
-
Heydar, M.
An integrated AHP-VIKOR methodology for plant location selection [Volume 24, Issue 2, 2011, Pages 127-137]
-
Heydari, A.
Heat Transfer and Carryover in the Dryout of a Heated Vertical Tube [Volume 6, Issue 1, 1993, Pages 45-58]
-
Heydari, A.
A Composite Finite Difference Scheme for Subsonic Transonic Flows (RESEARCH NOTE). [Volume 10, Issue 1, 1997, Pages 37-44]
-
Heydari, A.
Boundary Layers and Heat Transfer on a Rotating Rough Disk [Volume 11, Issue 1, 1998, Pages 29-36]
-
Heydari, Amin
Recycling and Reuse of Organo-sulfur Compounds from Barrels of Natural Gas Contaminated with Mercaptan Odorant [Volume 32, Issue 11, 2019, Pages 1527-1533]
-
Heydari, Amir
Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]
-
Heydari, Hadi
Nonlinear Dynamics of the Rotational Slender Axially Moving String with Simply Supported Conditions [Volume 29, Issue 6, 2016, Pages 834-842]
-
Heydari, M.
A New Comprehensive Model for Integrating Environmental, Economic, and Social Performance of Deep and Large-scale Open-Pit Copper Mines [Volume 37, Issue 1, 2024, Pages 1-13]
-
Heydari, Mohammad Hoseein
A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite [Volume 27, Issue 6, 2014, Pages 991-1004]
-
Heydari, Mohammad Mehdi
Proposed Relationship to Design the Waffle Floor under Harmonic Vertical Loading [Volume 26, Issue 10, 2013, Pages 1111-1118]
-
Heydari, R
Adsorption of Malachite Green from Aqueous Solution by Nanozeolite Clinoptilolite: Equilibrium, Kinetic and Thermodynamic Studies [Volume 31, Issue 1, 2018, Pages 1-11]
-
Heydari, Rouhollah
Pharmaceutical Wastewater Chemical Oxygen Demand Reduction: Electro-Fenton, UV-enhanced Electro-Fenton and Activated Sludge [Volume 32, Issue 12, 2019, Pages 1710-1715]
-
Heydarian, S.
Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
-
Heydari. T, A.M.
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Heydarzadeh Darzi, H.
Textural and Structural Characterizations of Mesoporous Chitosan Beads for Immobilization of Alpha-Amylase: Diffusivity and Sustainability of Biocatalyst [Volume 32, Issue 2, 2019, Pages 207-216]
-
Heyhat, Mohammad Mahdi
Numerical Simulation of Forced Convection of Nanofluids by a Two-Component Nonhomogeneous Model [Volume 23, Issue 1, 2010, Pages 89-99]
-
Hezarjaribi, yadollah
Simulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm [Volume 30, Issue 6, 2017, Pages 846-850]
-
Hezarkhani, A.
Calculation of Mass Transfer and Element Mobility During the Hydrothermal Alteration in the Sungun PORPHYRY Copper Deposit Iran [Volume 15, Issue 4, 2002, Pages 391-408]
-
H. Farahani, Mehrdad
A High-Velocity Impact Simulation using SPH-Projection Method [Volume 22, Issue 4, 2009, Pages 359-368]
-
H. Farahani, Mehrdad
Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm [Volume 25, Issue 3, 2012, Pages 239-248]
-
H-Gangaraj, S.M.
Side Effects of Shot Peening on Fatigue Crack Initiation Life [Volume 24, Issue 3, 2011, Pages 275-280]
-
Hidayat, A.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Hidayat, N.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Hidayat, Sahrul
Optimization of In-Situ Synthesis Process Parameters of LiFePO4/C-MAF-5 Surface Modification for Conductivity Improvement of LIB Cathode Material by Response Surface Method [(Articles in Press)]
-
Hidayatia, N. A.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Hijab Abubakar, M.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Hilal, N
Influence of Particle Size and Pressure Drop in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent [Volume 31, Issue 8, 2018, Pages 1437-1445]
-
Hilali, E.
Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
-
Himavathi, S
Neural Network Based Recognition System Integrating Feature Extraction and Classification for English Handwritten [Volume 25, Issue 2, 2012, Pages 99-106]
-
Hincapié, O. D.
Control of Formation of Intermetallic Compound in Dissimilar Joints Aluminum-steel [Volume 32, Issue 1, 2019, Pages 127-136]
-
Hirnawan, F
Determining of Geotechnical Domain Based on Joint Density and Fault Orientation at Batu Hijau Mine,West Sumbawa-Indonesia (TECHNICAL NOTE) [Volume 31, Issue 4, 2018, Pages 679-683]
-
Hizaji, R.
A Simple Approach to Predict the Shear Capacity and Failure Mode of Fix-ended Reinforced Concrete Deep Beams based on Experimental Study [Volume 32, Issue 4, 2019, Pages 474-483]
-
H. Joshaghani, A.
Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
-
Hnaien, Nidhal
Numerical Study of Interaction of Two Plane Parallel Jets [Volume 29, Issue 10, 2016, Pages 1421-1430]
-
Hojjat, N.
A New Method for Calculating Propagation Modes of a One Dimensional Photonic Crystal (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 25-28]
-
Holakooie, Mohammad Hosein
Sensorless Indirect Field Oriented Control of Single-sided Linear Induction Motor With a Novel Sliding Mode MRAS Speed Estimator [Volume 28, Issue 7, 2015, Pages 1011-1020]
-
Homaei, M.
Generating and Focusing the Ultrasound Waves Using Elastomer-based Capacitive Micro-Speakers [Volume 33, Issue 2, 2020, Pages 320-328]
-
Homaienezhad, M.
Third-order Decentralized Safe Consensus Protocol for Inter-connected Heterogeneous Vehicular Platoons [Volume 31, Issue 6, 2018, Pages 967-972]
-
Honarbakhsh, A.
Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
-
Honari Choobar, Fereydoon
Power plant project risk assessment using a fuzzy-ANP and fuzzy-TOPSIS method [Volume 25, Issue 2, 2012, Pages 107-120]
-
Honarmandnia, S.
Effect of nGO on Morphology, Mechanical Properties and Thermal Behavior of PLA/nGO Sheets Before and After Thermoforming: An Experimental Study [Volume 36, Issue 9, 2023, Pages 1695-1703]
-
Honarparvar, S.
Moditication Factor for Sizing Equation of Electrical Machines-Single and Three Phase Induction Motors(RESEARCH NOTE) [Volume 7, Issue 3, 1994, Pages 181-184]
-
Honarvar, M.
A Closed-loop Supply Chain Network Design Problem in Copper Industry [Volume 33, Issue 10, 2020, Pages 2008-2015]
-
Hong, Rongjing
Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
-
Hongjun, L.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Hongru, C.
Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
-
Hoonan Mehrabani, A.
Design and Simulation of a Novel Hetero-junction Bipolar Transistor with Gate-Controlled Current Gain [Volume 36, Issue 3, 2023, Pages 433-440]
-
Hooshmand, M.
Irradiation and Temperature Estimation with a New Extended Kalman Particle Filter for Maximum Power Point Tracking in Photovoltaic Systems [Volume 36, Issue 6, 2023, Pages 1099-1113]
-
Hope, G.S.
A Microprocessor-Based Hybrid Duplex Fault-Tolerant System [Volume 4, Issue 1, 1991, Pages 37-44]
-
Hosainpour, A.
Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
-
Hoseini, M. H.
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Hoseini, S. F.
Experimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator [Volume 32, Issue 1, 2019, Pages 71-77]
-
HoseinNezhad, Reza
A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]
-
HoseinNezhad, Reza
Fuzzy Clustering Approach Using Data Fusion Theory and its Application To Automatic Isolated Word Recognition [Volume 16, Issue 4, 2003, Pages 329-336]
-
Hoseinpour, Batool
Simulation of Cold Rolling Process Using Smoothed Particle Hydrodynamics (SPH) [Volume 26, Issue 5, 2013, Pages 515-522]
-
Hoseinzadeh, S
Blood Flow Simulation in an Aorta with a mild coarctation Using Magnetic Resonance Angiography and Finite Volume Method [Volume 31, Issue 4, 2018, Pages 673-678]
-
Hosiennejad, Alireza
Analysis of the Characteristics, Physical Concepts and Entropy Generation in a Turbulent Channel Flow Using Vortex Blob Method [Volume 29, Issue 7, 2016, Pages 985-994]
-
Hossain, I.
Enhancing Seismic Design of Non-structural Components Implementing Artificial Intelligence Approach: Predicting Component Dynamic Amplification Factors [Volume 36, Issue 7, 2023, Pages 1211-1218]
-
Hossain, Md.
Estimation and Prediction of Residential Building Energy Consumption in Rural Areas of Chongqing [Volume 26, Issue 9, 2013, Pages 955-962]
-
Hossainpour, A. R.
The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
-
Hossainpour, S.
Investigating the Effect of Clearance Distance between the Floor of a High-speed Train and Ground on Aerodynamic Forces in Presence of Side Wind [Volume 36, Issue 4, 2023, Pages 604-614]
-
Hosseinalipoor, S. M.
Steady Flow Analysis and Modeling of the Gas Distribution Network Using the Electrical Analogy (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1269-1276]
-
HosseinAlizadeh, R.
Artificial Neural Network Approach for Modeling of Mercury Adsorption from Aqueous Solution by Sargassum Bevanom Algae (RESEARCH NOTE) [Volume 28, Issue 8, 2015, Pages 1124-1133]
-
Hossein-Babaei, Faramarz
Electrophoretic Formation of Zinc Oxide Based Ntc Rsistors (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 75-80]
-
Hossein-Babaei, Faramarz
Thickness Dependence of Sensitivity in Thin Film Tin Oxide Gas Sensors Deposited by Vapor Pyrolysis [Volume 16, Issue 1, 2003, Pages 33-40]
-
Hosseingholi, Mahboobeh
Room Temperature Synthesis of N-doped Urchin-like Rutile TiO2 Nanostructure With Enhanced Photocatalytic Activity Under Sunlight [Volume 28, Issue 10, 2015, Pages 1401-1407]
-
Hosseini, M.
Entropy-based Serviceability Assessment of Water Distribution Networks, Subjected to Natural and Man-Made Hazards [Volume 27, Issue 5, 2014, Pages 675-688]
-
Hosseini, M.
Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
-
Hosseini, M.
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Hosseini, M.
Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
-
Hosseini, M. G.
Synergistic Influence of Benzoate Ions on Inhibition of Corrosion of Mild Steel in 0.5m Sulfuric Acid by Benzotriazole [Volume 16, Issue 3, 2003, Pages 255-264]
-
Hosseini, Mohammad
Crack Detection In Functionally Graded Beams Using Conjugate Gradient Method [Volume 27, Issue 3, 2014, Pages 367-374]
-
Hosseini, M.R.
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Hosseini, Omid
A CLOSED FORM SOLUTION FOR FREE VIBRATION ANALYSIS OF TUBE-IN-TUBE SYSTEMS IN TALL BUILDINGS [Volume 25, Issue 2, 2012, Pages 107-114]
-
Hosseini, R.
A Novel Type-2 Adaptive Neuro Fuzzy Inference System Classifier for Modelling Uncertainty in Prediction of Air Pollution Disaster (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1746-1751]
-
Hosseini, Rahil
A Fuzzy Rule-based Expert System for the Prognosis of the Risk of Development of the Breast Cancer [Volume 27, Issue 10, 2014, Pages 1557-1564]
-
Hosseini, S. A.
Plastic Properties and Collapse Investigation of Fine-grained Soil Rehabilitated with Styrene Butadiene Rubber: A Case Study in Kerman, Iran [Volume 36, Issue 10, 2023, Pages 1746-1757]
-
Hosseini, S. A.
Effect of Acidic Environments Containing Hydrochloric Acid on Rubberized Concrete [Volume 36, Issue 12, 2023, Pages 2198-2206]
-
Hosseini, S.A
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Hosseini, Sayed
Thin Film Heterogeneous Ion Exchange Membranes Prepared by Interfacial Polymerization of PAA-co-Iron-Nickel Oxide Nanoparticles on Polyvinylchloride Based Substrate [Volume 29, Issue 3, 2016, Pages 297-305]
-
Hosseini, Sayed
Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
-
Hosseini, Sayed Mohsen
Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
-
Hosseini, S. B.
Numerical Investigation of Nonlinear Oscillations and Compression-Only Behavior of a Coated Microbubble Near an Elastic Wall [Volume 33, Issue 10, 2020, Pages 2095-2104]
-
Hosseini, S. E.
Accurate Analytical Modeling of Drain Current of Heterojunction Tunneling Field Effect Transistor [Volume 37, Issue 7, 2024, Pages 1331-1342]
-
Hosseini, Seyyed mohsen
Preparation of Polyvinylchloride Nanofiltration Membrane: Investigation the Effect of Thickness, Prior Evaporation Time and Addition Polyethylenglchol as Additive on Membrane Performance and Properties [Volume 29, Issue 3, 2016, Pages 280-287]
-
Hosseini, S. H.
New Methods for Harmonic Reduction in T. C. R. by Sequence Control of Transformer Taps [Volume 2, Issue 1, 1989, Pages 25-34]
-
Hosseini, S. H.
A Non-Sinusoidal Reference Wave for Pwm Ac Drives [Volume 6, Issue 1, 1993, Pages 25-36]
-
Hosseini, S. H.
Transient Minimization Within Static Var Compensated Distribution Systems [Volume 6, Issue 2, 1993, Pages 87-94]
-
Hosseini, S. H.
Neural Network Implementation of a Three Phase Regulated PWM AC to Dc Convener with Input Unbalance Correction [Volume 9, Issue 3, 1996, Pages 151-158]
-
Hosseini, S. H.
Dynamic Compensation of Electrical Power Systems Using Multilevel Voltage Source Inverter [Volume 14, Issue 3, 2001, Pages 215-228]
-
Hosseini, S. H.
A New Strategy for Simultaneous Compensation of Instantaneous Reactive Power and Harmonics of Non-Linear Loads (RESEARCH NOTE) [Volume 14, Issue 4, 2001, Pages 333-338]
-
Hosseini, S. H.
Neuro-fuzzy Modelling and Experimental Study of the Physiological Comfort of Green Cotton Fabric Based on Yarn Properties [Volume 33, Issue 12, 2020, Pages 2443-2449]
-
Hosseini, S. H.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Hosseini, S. H.
Determination of Blast Impact Range and Safe Distance for a Reinforced Concrete Pile Under Blast Loading [Volume 36, Issue 2, 2023, Pages 384-397]
-
Hosseini, S. J.
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
-
Hosseini, S. M.
Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance [Volume 31, Issue 10, 2018, Pages 1609-1616]
-
Hosseini, S. M.
A New Restricted Earth Fault Relay Based on Artificial Intelligence [Volume 32, Issue 1, 2019, Pages 62-70]
-
Hosseini, S. M.
A New Approach to Provide High Water Permeable Polyethersulfone based Nanofiltration Membrane by Air Plasma Treatment [Volume 32, Issue 3, 2019, Pages 354-359]
-
Hosseini, S. M.
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Hosseini, S.M.
Evaluation of Scattering Parameters (RESEARCH NOTE). [Volume 5, Issue 3, 1992, Pages 139-140]
-
Hosseini, S.M.
On the Performance of Different Empirical Loss Equations for Flow Through Coarse Porous Media (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 249-254]
-
Hosseini, S.M.
Presenting a Modified SPH Algorithm for Numerical Studies of Fluid-Structure Interaction Problems [Volume 20, Issue 2, 2007, Pages 167-178]
-
Hosseini, S.M.
A High-Velocity Impact Simulation using SPH-Projection Method [Volume 22, Issue 4, 2009, Pages 359-368]
-
Hosseini, S. M. H.
A Bi-objective Cold Supply Chain for Perishable Products Considering Quality Aspects: A Case Study in Iran Dairy Sector [Volume 35, Issue 2, 2022, Pages 458-470]
-
Hosseini, S. P
Enhancement of the Cooling System Performance of the Proton-exchange Membrane Fuel Cell By Baffle-restricted Coolant Flow Channels [Volume 31, Issue 5, 2018, Pages 812-819]
-
Hosseini, Z.
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction [Volume 35, Issue 1, 2022, Pages 220-227]
-
Hosseini-Andargoli, S. M.
A Modified Noise Analysis of a Common Source ̶ Common Gate Low Noise Transconductance Amplifier for Sub-micron Technologies [Volume 31, Issue 11, 2018, Pages 1903-1909]
-
Hosseini-Ardali, Seyed Mohsen
Preparation, Physiochemical and Kinetic Investigations of V2O5/SiO2 Catalyst for the Sulfuric Acid Production [Volume 29, Issue 11, 2016, Pages 1478-1488]
-
Hosseini Hashemi, S.
Analytical Solution for Free Vibration of a Variable Cross-Section Nonlocal Nanobeam [Volume 29, Issue 5, 2016, Pages 688-696]
-
Hosseini Hashemi, S.
Free Vibration Analysis of Functionally Graded Materials Non-uniform Beams [Volume 29, Issue 12, 2016, Pages 1734-1740]
-
Hosseini Hashemi, S.
Free Vibration Analysis of Nonuniform Microbeams Based on Modified Couple Stress Theory: an Analytical Solution [Volume 30, Issue 2, 2017, Pages 311-320]
-
Hosseini mola, J
Distributed Generation Expansion Planning Considering Load Growth Uncertainty: A Novel Multi-Period Stochastic Model [Volume 31, Issue 3, 2018, Pages 405-414]
-
Hosseini nasab, hasan
A Robust Two-stage Data Envelopment Analysis Model for Measuring Efficiency: Considering Iranian Electricity Power Production and Distribution Processes [Volume 29, Issue 5, 2016, Pages 646-653]
-
Hosseini-nasab, H.
Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
-
Hosseini Nasab, M.
Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
-
Hosseini Nasab, M.
Mapping Hydrothermal Alteration Zones Associated with Copper Mineralization using ASTER Data: A Case Study from the Mirjaveh Area, Southeast Iran [Volume 36, Issue 4, 2023, Pages 720-732]
-
Hosseini Nasab, M.
Ash Reduction of the Tailings of Agh-Darband Coal Washing Plant by Flotation Method [Volume 37, Issue 4, 2024, Pages 739-752]
-
Hosseini-Nasab, H.
A Multi-objective Sustainable Medicine Supply Chain Network Design Using a Novel Hybrid Multi-objective Metaheuristic Algorithm [Volume 33, Issue 10, 2020, Pages 1986-1995]
-
Hosseinipour, A.
Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil [Volume 32, Issue 1, 2019, Pages 18-27]
-
Hosseinipour, S. J.
Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming [Volume 32, Issue 4, 2019, Pages 587-595]
-
Hosseinipour, S.J.
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Hosseinipour, S.J.
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Hosseinirad, Seyed Mojtaba
Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
-
Hosseinirad, S. M.
A Hierarchy Topology Design Using a Hybrid Evolutionary Algorithm in Wireless Sensor Networks [Volume 31, Issue 10, 2018, Pages 1651-1658]
-
Hosseini Rad, Ali
Energy and Exergy Evaluation of Multi-channel Photovoltaic/Thermal Hybrid System: Simulation and Experiment [Volume 32, Issue 11, 2019, Pages 1665-1680]
-
Hosseini Ravandi, S. A.
Assessing of Fabric Appearance Changes Using Image Processing Techniques [Volume 12, Issue 2, 1999, Pages 99-106]
-
Hosseini Ravandi, S. A.
Investigation of the Size Effect on the Nano-beam Type Piezoelectric Low Power Energy Harvesting [Volume 31, Issue 9, 2018, Pages 1585-1592]
-
Hosseini Sarvari, Seyed Masoud
Optimum Shape Design of a Radiant Oven by the Conjugate Gradient Method and a Grid Regularization Approach [Volume 25, Issue 2, 2012, Pages 167-176]
-
Hosseini Sarvari, S.M.
Simulation of Ideal External and Internal Flows with Arbitrary Boundaries Using Schwarz Christoffel Transformation [Volume 17, Issue 4, 2004, Pages 405-414]
-
Hosseinitabar, Parisa
Application of Iron Electrode in Textile Industry Wastewater Treatment Using Electro-fenton Technique: Experimental and Statistical Study [Volume 29, Issue 7, 2016, Pages 887-897]
-
Hosseinnejad, H.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Hosseinnejad, H.
Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
-
Hosseinnia, Azarmidokht
Stimuli-responsive Biosynthesis of Gold Nanoparticles: Optimization, Kinetics, and Thermodynamics of Biosorption [Volume 32, Issue 11, 2019, Pages 1506-1515]
-
Hosseinnia, S. H.
A Solution of Riccati Nonlinear Differential Equation using Enhanced Homotopy Perturbation Method (EHPM) [Volume 21, Issue 1, 2008, Pages 27-38]
-
HosseinNia, S. H.
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Hosseinpour, K.
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Hosseinpour, M.
Design and Analysis of a Power Quality Improvement System for Photovoltaic Generation Based on LCL-Type Grid Connected Inverter [Volume 37, Issue 2, 2024, Pages 252-267]
-
Hosseinpour Gollo, M.
The Effect of Rapid Deformation Process to Improve Creep and Tensile Resistance of AZ91 Magnesium Alloy Plates [Volume 33, Issue 10, 2020, Pages 2039-2046]
-
Hossein Pour Shafaghi, Ali
Numerical Study on Hydrodynamics and Heat Transfer Characteristics Around a Cylinder with Inclined Splitter Plates [Volume 29, Issue 4, 2016, Pages 546-553]
-
Hosseinsabet, Ali
Presenting effective methods in the classification of echocardiographic views using deep learning [(Articles in Press)]
-
Hosseinzadeh, Alireza G.
Recycling and Reuse of Organo-sulfur Compounds from Barrels of Natural Gas Contaminated with Mercaptan Odorant [Volume 32, Issue 11, 2019, Pages 1527-1533]
-
Hosseinzadeh, Amir Reza
Plasticity Effect on Residual Stresses Measurement Using Contour Method [Volume 26, Issue 10, 2013, Pages 1203-1212]
-
Hosseinzadeh, F.
Residual Stresses Measurement in Hollow Samples Using Contour Method [Volume 33, Issue 5, 2020, Pages 885-893]
-
Hosseinzadeh, Hamed
Thermal Simulation of Solidification Process in Continuous Casting [Volume 28, Issue 5, 2015, Pages 812-821]
-
Hosseinzadeh, M.
Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks [Volume 15, Issue 2, 2002, Pages 183-190]
-
Hosseinzadeh, M.
Efficiency Optimization Thermal Analysis and Power Output of a Modified Incinerator Plant Using Organic Rankine Cycle [Volume 36, Issue 7, 2023, Pages 1300-1309]
-
Hosseinzadeh, Mostafa
Improvement of the Solvent Extraction of Rhenium from Molybdenite Roasting Dust Leaching Solution using Counter-current Extraction by a Mixer-settler Extractor (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 651-658]
-
Hosseinzadeh, N.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Hosseinzadeh, Naghdali
Vibration Mechanism of 13th Century Historical Menar-Jonban Monument in Iran [Volume 24, Issue 4, 2011, Pages 313-324]
-
Hosseinzadeh, Y.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Hosseinzadeh, Y.
Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
-
Hosseinzadeh Kashan, A.
Coordination of Pricing and Order Quantity for Two Replaceable and Seasonal Products [Volume 33, Issue 3, 2020, Pages 439-447]
-
Hosseinzadeh Lotfi, F.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Hosseinzadeh Lotfi, Farhad
The Effects of the Size of Decision -making Units on Allocating Fixed Costs in Supply Chains [(Articles in Press)]
-
Hosseinzadeh-Lotfi, .
A Two-Stage Green Supply Chain Network with a Carbon Emission Price by a Multi-objective Interior Search Algorithm [Volume 32, Issue 6, 2019, Pages 828-834]
-
Hossein Zadeh Lotfi, F.
Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
-
Hoten, H. V.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Hoten, H. V.
Synthesis of Hydroxyapatite Bioceramic from Cuttlefish Shell Waste and Coral Using Microwave Hydrothermal [Volume 37, Issue 9, 2024, Pages 1755-1762]
-
Hou, Li
Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
-
Hou, Li
Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
-
Houseinpour, Maryam
Lipase Production in Solid State Fermentation Using Aspergillus niger: Response Surface Methodology [Volume 25, Issue 3, 2012, Pages 151-160]
-
Houshmand, A. A.
On the Performance of a Multivariate Control Chart in Multistage Environment [Volume 14, Issue 1, 2001, Pages 49-64]
-
Houshmand, Mahmoud
A Lean Manufacturing Roadmap for an Automotive Body Assembly Line within Axiomatic Design Framework [Volume 17, Issue 1, 2004, Pages 51-72]
-
Howldar, S.
Design and Qualitative Analysis of Hetero Dielectric Tunnel Field Effect Transistor Device [Volume 36, Issue 6, 2023, Pages 1129-1135]
-
Howldar, S.
Design and Analysis of Hetero Dielectric Dual Material Gate Underlap Spacer Tunnel Field Effect Transistor [Volume 36, Issue 12, 2023, Pages 2137-2144]
-
Howldar, S.
Gate Oxide Thickness and Drain Current Variation of Dual Gate Tunnel Field Effect Transistor [Volume 37, Issue 3, 2024, Pages 520-528]
-
Howldar, S.
Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node [Volume 37, Issue 5, 2024, Pages 887-895]
-
Hozhabrossadati, Seyed Mojtaba
Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
-
Hozhabrossadati, Seyed Mojtaba
Three Different Methods for Approximate Analysis of Bar Structures [Volume 33, Issue 1, 2020, Pages 47-54]
-
Hozhabrossadati, S. M
Free Vibration of a Generalized Plane Frame [Volume 31, Issue 4, 2018, Pages 538-547]
-
Hu, J.
Simulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods [Volume 32, Issue 7, 2019, Pages 1023-1030]
-
Hu, W.
Development of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 339-348]
-
Huang, W.
Characteristics of Shale Gas Reservoir in Jiyang Depression and its Significance in Drilling and Exploitation [Volume 33, Issue 8, 2020, Pages 1677-1686]
-
Huang, W.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
-
Hubadillah, S. K
Preliminary Characterization of Corn Cob Ash as an Alternative Material for Ceramic Hollow Fiber Membrane (CHFM/CCA) [Volume 31, Issue 8, 2018, Pages 1389-1397]
-
Hubadillah, S. K
Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
-
Humphries, U.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Hung, T. Q.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Hung Phi, C.
Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle [Volume 35, Issue 8, 2022, Pages 1571-1578]
-
Husain, A.
Thermal Performance of Jet Impingement with Spent Flow Management [Volume 30, Issue 10, 2017, Pages 1599-1608]
-
Hussein, A. A.
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Hussein, M. N.
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Hussein, N. F.
Effect of Tubular Solar Absorber on Performance of Counterflow Double Pass Solar Air Heater: Experimental and Numerical Studies [Volume 35, Issue 10, 2022, Pages 2007-2017]
-
Husseiny, A.
Reliability and Availability Analysis of Fusion Power Plants [Volume 1, Issue 1, 1988, Pages 63-72]
-
Husseinzadeh Kashan, A
An Integrated Closed-loop Supply Chain Configuration Model and Supplier Selection based on Offered Discount Policies [Volume 31, Issue 3, 2018, Pages 440-449]
-
Hussin, Ali K.
Experimental Study on Performance of Fiber Concrete-filled Tube Columns under Axial Loading [Volume 32, Issue 12, 2019, Pages 1726-1732]
-
Hutchinson, T.P.
Discussion of Road Accidents in Iran (SHORT COMMINUCATION). [Volume 5, Issue 1, 1992, Pages 75-76]
I
-
Ibatullin, A.
Potential of High-Carbon Domanik (Upper Devonian) Shale Deposits: Timan-Pechora Oil and Gas Province Assessment [Volume 37, Issue 8, 2024, Pages 1639-1657]
-
Ibrahim, F.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Ibrahim, N.
Removal of Coliform, Suspended Solids, UV254 and Colour Using Zeolite and Activated Carbon in Riverbank Filtration System [Volume 33, Issue 5, 2020, Pages 732-736]
-
Ibrahim, Z
Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique [Volume 31, Issue 8, 2018, Pages 1302-1307]
-
Ichsan Ali, M.
Monitoring the Built-up Area Transformation Using Urban Index and Normalized Difference Built-up Index Analysis [Volume 32, Issue 5, 2019, Pages 647-653]
-
Ideris, A.
Acid Hydrolysis of Pretreated Palm Oil Lignocellulosic Wastes [Volume 20, Issue 2, 2007, Pages 147-156]
-
Ignatiev, K.
Diversification of Portfolio of International Oil and Gas Assets using Cluster Analysis [Volume 36, Issue 10, 2023, Pages 1783-1792]
-
Ihsan, E. A.
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Ihueze, Christopher C.
Optimization of Hardness Strengths Response of Plantain Fibres Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design [Volume 26, Issue 1, 2013, Pages 1-12]
-
Ilbegyan, Sara
Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
-
Ildarabadi, R
A Novel Method for Modeling and Simulation of Asymmetrical Impedance-source Converters [Volume 31, Issue 5, 2018, Pages 741-751]
-
Ilin, I. V.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Iliyaeifar, M. M.
Artificial Neural Network-based Fault Location in Terminal-hybrid High Voltage Direct Current Transmission Lines [Volume 36, Issue 2, 2023, Pages 215-225]
-
Ilman, M. N.
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Ilyas Khan, M.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
Ilyushin, P. Y.
Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation [Volume 35, Issue 6, 2022, Pages 1178-1185]
-
Imam Cahyadi, A.
Enhancing Low-Pass Filter Energy Management with Adaptive State of Charge Limiter for Hybrid Energy Storage in Electric Vehicles [Volume 37, Issue 8, 2024, Pages 1486-1499]
-
Imani, A
Analytical Investigation of Jeffery-hamel Fow with High Magnetic Field and Nano Particle by RVIM [Volume 25, Issue 3, 2012, Pages 249-256]
-
Imani, Z.
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Imani, Z.
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Imanifar, A.
Using Reluctance Torque Theory in Spoke Type Permanent Magnet Vernier Motors to Increase Average Torque [Volume 37, Issue 6, 2024, Pages 1183-1193]
-
Imhof, K.
Some Issues in Implementation of a Voltage Stability Analysis Function in an Energy Management System Environment [Volume 11, Issue 3, 1998, Pages 147-156]
-
Imran, A.
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Inan, K.
Recent Developments in Discrete Event Systems [Volume 5, Issue 1, 1992, Pages 25-32]
-
Ingle, R
A Unique Approach of Noise Elimination from Electroencephalography Signals between Normal and Meditation State [Volume 31, Issue 5, 2018, Pages 719-728]
-
Inuwa, I. M
Synthesis and Characterization of CaO-TiO2 for Transesterification of Vegetable Palm Oil [Volume 31, Issue 8, 2018, Pages 1326-1333]
-
Iqbal, M.
Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
-
Iqbal, Z.
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Iqhrammullah, M.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Iqhrammullah, M.
Discrimination of Plastic Waste using Laser-induced Breakdown Spectroscopy-principal Component Analysis: Highlighting Molecular LIBS [Volume 36, Issue 1, 2023, Pages 98-107]
-
Iraji, A.
Evaluating Finn-Byrne Model in Liquefaction Analysis of Quay Wall and Cantilevered Retaining Wall Models [Volume 36, Issue 6, 2023, Pages 1075-1091]
-
Iraji, Amin
Reinforced Soil Wall Analysis under Working Stress Conditions Using a Two Phase Model with the Introduction of a New Design Parameter [Volume 32, Issue 12, 2019, Pages 1762-1772]
-
Irani, F.
Stability of One Bay Symmetrical Frames with Nonuniform Members [Volume 1, Issue 4, 1988, Pages 193-200]
-
Irani, F.
Reinforced Concrete Columns in Torsion (RESEARCH NOTE). [Volume 6, Issue 4, 1993, Pages 179-185]
-
Iranmanesh, M.
The Analysis of Longitudinal Shrinkage in Butt Weld Joint (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 197-202]
-
Iranmanesh, Seyyed Hossein
Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
-
Iranpour, R.
Simulation of a Variable Reluctance Steping Motor for Sinusoidal and Step Exitations [Volume 9, Issue 2, 1996, Pages 9-20]
-
Iranpour Mobarakeh, M.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Iranpour Mobarakeh, M.
Improving the Accuracy of Brain Tumor Identification in Magnetic Resonanceaging using Super-pixel and Fast Primal Dual Algorithm [Volume 36, Issue 3, 2023, Pages 505-512]
-
Iravani, Sahar
A General Framework for 1-D Histogram-baesd Image Contrast Enhancement [Volume 29, Issue 10, 2016, Pages 1384-1391]
-
Irawati, I. D.
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Iriany, I
Isolationand Characterization of Nanocrystal from Corncob Waste Using H2SO4 Hydrolysis Method (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 533-537]
-
Irmawaty, R.
Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
-
Irmawaty, R.
Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
-
Irvan, I.
Variations of Organic Loading Rate on Tofu Wastewater Degradation using Upflow Anaerobic Sludge Blanket Reactor by Modified Stover-Kincannon Model [Volume 36, Issue 3, 2023, Pages 490-496]
-
Isazadeh, M. A.
Simulation of Styrene Polymerization in Arbitrary Cross-Sectional Duct Reactors by Boundary-Fitted Coordinate Transformation Method [Volume 14, Issue 4, 2001, Pages 289-302]
-
Isazadeh, M. A.
Thermal Development for Ducts of Arbitrary Cross Sections by Boundary-Fitted Coordinate Transformation Method [Volume 15, Issue 3, 2002, Pages 211-226]
-
Isazadeh, M. A.
Numerical Solution of Reacting Laminar Flow Heat and Mass Transfer in Ducts of Arbitrary Cross-Sections for Newtonian and Non-Newtonian Fluids [Volume 16, Issue 1, 2003, Pages 1-20]
-
Islam, Md.
Deterioration of Concrete in Ambient Marine Environment (RESEARCH NOTE) [Volume 25, Issue 4, 2012, Pages 289-302]
-
Islam, Md.
Deterioration of Concrete in Ambient Marine Environment (RESEARCH NOTE) [Volume 25, Issue 4, 2012, Pages 289-302]
-
Islam, N.
Probabilistic Damage Analysis of Isolated Steel Tub Girder Bridge Excited by Near and Far Fault Ground Motions [Volume 36, Issue 2, 2023, Pages 289-298]
-
Islam, R.
Investigation of Different Validation Parameters of Micro Gas Turbine for Range Extender Electric Truck [Volume 31, Issue 10, 2018, Pages 1782-1788]
-
ISLAM, MOHAMMAD
Selection of Intermodal Conductivity Averaging Scheme for Unsaturated Flow in Homogeneous Media [Volume 28, Issue 4, 2015, Pages 490-498]
-
Ismael, M. A.
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
-
Ismail, A.
Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
-
Ismail, A. F
Adsorptive Removal of Cr(VI) and Cu(II) Ions from Water Solution using Graphene Oxide-Manganese Ferrite (GMF) Nanomaterials [Volume 31, Issue 8, 2018, Pages 1341-1346]
-
Ismail, A. F
Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
-
Ismail, A. F
Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
-
Ismail, A. F
Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation [Volume 31, Issue 8, 2018, Pages 1446-1454]
-
Ismail, A. F
Zwitterion Embedded Thin Film Composite Membrane for Oily Wastewater Treatment [Volume 31, Issue 8, 2018, Pages 1464-1472]
-
Ismail, A. F.
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 Co-polyimide [Volume 31, Issue 8, 2018, Pages 1356-1363]
-
Ismail, A. R.
Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile [Volume 21, Issue 3, 2008, Pages 291-302]
-
Ismail, A. R.
An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption [Volume 22, Issue 1, 2009, Pages 91-97]
-
Ismail, L.
Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil [Volume 32, Issue 1, 2019, Pages 18-27]
-
Ismail, N. H.
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 Co-polyimide [Volume 31, Issue 8, 2018, Pages 1356-1363]
-
Ismail, S.
Effective Blended Learning Model Selection Based on Student Learning Style using Analytic Hierarchy Process for an Undergraduate Engineering Course [Volume 36, Issue 12, 2023, Pages 2232-2242]
-
Ismarwanti, Sri
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Ivanchikhin, S. V.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
Ivanov, Matthew
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Ivanov, V. A.
The Object Detection Efficiency in Synthetic Aperture Radar Systems [Volume 33, Issue 2, 2020, Pages 337-343]
-
Ivanov, Victor
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Ivanovich Nikolaev, N.
Sedimentation Stability of Oil Well Cements in Directional Wells (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1105-1109]
-
Ivaz, Karim
A Numerical Improvement in Analyzing the Dynamic Characteristics of an Electrostatically Actuated Micro-beam in Fluid Loading with Free Boundary Approach [Volume 29, Issue 7, 2016, Pages 1005-1013]
-
Ivkin, Alexey
The potential application of saponite clay for the production of drilling fluids [(Articles in Press)]
-
Izadi, L.
A Hybrid Genetic Algorithm for Integrated Production and Distribution Scheduling Problem with Outsourcing Allowed [Volume 33, Issue 11, 2020, Pages 2285-2298]
-
Izadi, M.
Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy [Volume 32, Issue 2, 2019, Pages 338-345]
-
Izadi Zamanabadi, Esmaeel
Two Important Issues Relevant to Torsional Response of Asymmetric 8-Story RC BuildingDesigned with Direct Displacement based Design Approach [Volume 28, Issue 9, 2015, Pages 1257-1267]
-
Iziy, M.
Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
J
-
J, Sumalatha
Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
-
Jaafar, A. A.
Experimental Investigation of Brick-Slabs: Evaluation of the Performance and Ductility of Various Brick Materials [Volume 36, Issue 9, 2023, Pages 1636-1644]
-
Jaafar, H.
Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes [Volume 36, Issue 11, 2023, Pages 2004-2014]
-
Jaafar, J
Adsorptive Removal of Cr(VI) and Cu(II) Ions from Water Solution using Graphene Oxide-Manganese Ferrite (GMF) Nanomaterials [Volume 31, Issue 8, 2018, Pages 1341-1346]
-
Jaafar, M.S.
Numerical Modeling of Railway Track Supporting System using Finite-Infinite and Thin Layer Elements [Volume 22, Issue 2, 2009, Pages 131-144]
-
Jaafarian, M
Experimental Investigation of Energy Consumption and Performance of Reverse Osmosis Desalination using Design of Experiments Method [Volume 31, Issue 1, 2018, Pages 79-87]
-
Jaafarzadeh, N.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Jabari Moghadam, A.
A Numerical Study of Flow and Heat Transfer Between Two Rotating Vertically Eccentric Spheres with Time- Dependent Angular Velocities [Volume 21, Issue 3, 2008, Pages 295-318]
-
Jabari Moghadam, A.
Slip Velocity in Flow and Heat Transfer of Non-newtonian Fluids in Microchannels [Volume 30, Issue 7, 2017, Pages 1054-1065]
-
Jabari Moghadam, Ali
Thermal Simulation of Solidification Process in Continuous Casting [Volume 28, Issue 5, 2015, Pages 812-821]
-
Jabari Moghadam, Ali
Time-periodic Electroosmotic Flow of Non-newtonian Fluids in Microchannels [Volume 29, Issue 5, 2016, Pages 706-714]
-
Jabari Moghadam, Ali
Two-fluid Electrokinetic Flow in a Circular Microchannel (RESEARCH NOTE) [Volume 29, Issue 10, 2016, Pages 1469-1477]
-
Jabbar, A. M.
Experimental and Numerical Investigation of the Impact of Basalt Fibers and Tie Spacing on Short Concrete Column Behavior [Volume 36, Issue 7, 2023, Pages 1287-1299]
-
Jabbar, A. M.
A Numerical Study to Investigate Shear Behavior of High-strength Concrete Beams Externally Retrofitted with Carbon Fiber Reinforced Polymer Sheets [Volume 36, Issue 11, 2023, Pages 2112-2123]
-
Jabbar Hassan, A.
Metallurgical and Mechanical Behavior of AISI 316- AISI 304 during Friction Welding Process [Volume 32, Issue 2, 2019, Pages 306-312]
-
Jabbar Hassan, A.
Experimental Investigation of Friction Pressure Influence on the Characterizations of Friction Welding Joint for AISI 316 [Volume 33, Issue 12, 2020, Pages 2514-2520]
-
Jabbar Hassan, A.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Jabbar Hassan, A.
Experimental Study of Thermal Ageing and Hydrogen Embrittlement Effect on the Equipments of a Rocket Engine [Volume 37, Issue 1, 2024, Pages 56-66]
-
Jabbari, E.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Jabbari, Mona
Lot Streaming in No-wait Multi Product Flowshop Considering Sequence Dependent Setup Times and Position Based Learning Factors [Volume 28, Issue 7, 2015, Pages 1031-1039]
-
Jabbarzadeh, A
Optimal Policy of Condition-Based Maintenance Considering Probabilistic Logistic Times and the Environmental Contamination Issues [Volume 31, Issue 2, 2018, Pages 357-364]
-
Jabbarzadeh, A.
An Extension to the Economic Production Quantity Problem with Deteriorating Products Considering Random Machine Breakdown and Stochastic Repair Time [Volume 33, Issue 8, 2020, Pages 1567-1578]
-
Jabbarzadeh, Armin
A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
-
Jabbarzadeh, Mehrdad
Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
-
Jabbarzadeh, Mehrdad
A Non-linear Static Equivalent Model for Multi-layer Annular/Circular Graphene Sheet Based on Non-local Elasticity Theory Considering Third Order Shear Deformation Theory in Thermal Environment [Volume 28, Issue 10, 2015, Pages 1533-1542]
-
Jabbarzadeh, Mehrdad
Nonlinear Buckling of Circular Nano Plates on Elastic Foundation [Volume 29, Issue 5, 2016, Pages 697-705]
-
Jabir, H. A.
Evaluation of lightweight Concrete Core Test Including Steel Bars [Volume 36, Issue 6, 2023, Pages 1121-1128]
-
Jacques, M.
New Approach of Deployment of the Multi-static Radars Based on an Aperture Angle and the Probability of False Alarm [Volume 36, Issue 9, 2023, Pages 1589-1596]
-
Jaderyan, Morteza
Automatic Hashtag Recommendation in Social Networking and Microblogging Platforms Using a Knowledge-Intensive Content-based Approach [Volume 32, Issue 8, 2019, Pages 1101-1116]
-
Jadhav, S. P.
Dry Sliding Behaviour Study of Novel Low-metallic Friction Materials by using DoE-Taguchi Method [Volume 37, Issue 3, 2024, Pages 452-459]
-
Jadidi, A. M
An Algorithm based on Predicting the Interface in Phase Change Materials [Volume 31, Issue 5, 2018, Pages 799-804]
-
Jadidi, M
An Algorithm based on Predicting the Interface in Phase Change Materials [Volume 31, Issue 5, 2018, Pages 799-804]
-
Jadidi, M.
Nitinol Spinal Vertebrae: A Favorable New Substitute [Volume 32, Issue 6, 2019, Pages 842-851]
-
Jadidi Ardekani, Mohammad
Unravelling the Dynamics: Social Media, Absorptive Capacity, and Organizational Performance [(Articles in Press)]
-
Jaefarzadeh, Mohammad Reza
Hydraulic Analysis of Water Supply Networks using a Modified Hardy Cross Method [Volume 27, Issue 9, 2014, Pages 1331-1338]
-
Jafar Gholi Beik, A.
Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
-
Jafar Gholi Beik, A. R.
Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study [Volume 35, Issue 1, 2022, Pages 237-247]
-
Jafari, A
Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 554-563]
-
Jafari, Abbasa-Ali
Minimizing Makespan with Start Time Dependent Jobs in a Two Machine Flow Shop [Volume 29, Issue 6, 2016, Pages 778-787]
-
Jafari, A.H.
Hot Corrosion Behavior of Magnesite – Chromite Refractories Used in Reverberatory Furnaces at Sarcheshmeh Copper Complex [Volume 16, Issue 1, 2003, Pages 71-79]
-
Jafari, A.H.
An Investigation on the Performance of an Imidazoline Based Commercial Corrosion Inhibitor on CO2 Corrosion of Mild Steel [Volume 20, Issue 1, 2007, Pages 35-44]
-
Jafari, Amin
Size Effect on Free Transverse Vibration of Cracked Nano-beams using Couple Stress Theory [Volume 28, Issue 2, 2015, Pages 296-304]
-
Jafari, B.
Determination of Riboflavin by Nanocomposite Modified Carbon Paste Electrode in Biological Fluids Using Fast Fourier Transform Square Wave Voltammetry [Volume 33, Issue 9, 2020, Pages 1696-1702]
-
Jafari, Bahram
Simulation of Dual Fuel Combustion of Direct Injection Engine with Variable Natural Gas Premixed Ratio [Volume 32, Issue 9, 2019, Pages 1327-1336]
-
Jafari, Mohammad
EFFECT OF WAVY WALL ON CONVECTION HEAT TRANSFER OF WATER-AL2O3 NANOFLUID IN A LID-DRIVEN CAVITY USING LATTICE BOLTZMANN METHOD [Volume 25, Issue 2, 2012, Pages 165-176]
-
Jafari, Mostafa
Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
-
Jafari, Mostafa
Simulation of Strap-On Boosters Separation in the Atmosphere [Volume 28, Issue 2, 2015, Pages 164-171]
-
Jafari, Reza
Network Location Problem with Stochastic and Uniformly Distributed Demands [Volume 29, Issue 5, 2016, Pages 654-662]
-
Jafari, Saeed
Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow [Volume 24, Issue 3, 2011, Pages 301-319]
-
Jafari, V.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Jafari, Z.
Growth Media Optimization for Production of Alkaline Protease from Industrial Wastewater using Bacillus subtilis PTCC 1254 [Volume 36, Issue 3, 2023, Pages 513-522]
-
Jafarian, A.
Second Law Based Analysis of Fluid Flow in the Regenerator of Pulse Tube Refrigerators [Volume 21, Issue 2, 2008, Pages 181-194]
-
Jafarian, F.
Experimental Evaluation of Surface Alterations Induced in Machining of Ti-6Al-4V Alloy [Volume 33, Issue 3, 2020, Pages 486-493]
-
Jafarian Dehkordi, Z.
Improving the Accuracy of Brain Tumor Identification in Magnetic Resonanceaging using Super-pixel and Fast Primal Dual Algorithm [Volume 36, Issue 3, 2023, Pages 505-512]
-
Jafarigavzan, Iraj
Influence of Afterbody and Boundary Layer on Cavitating Flow [Volume 22, Issue 2, 2009, Pages 185-196]
-
Jafari Nasr, M. R.
Full Analysis of Low Finned Tube Heat Exchangers [Volume 16, Issue 3, 2003, Pages 217-232]
-
Jafarinejad, F.
Optimization of Quantum Cellular Automata Circuits by Genetic Algorithm [Volume 33, Issue 2, 2020, Pages 229-236]
-
Jafari-Nodoushan, Abbasali
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
JafariNodoushan, T.
Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
-
Jafaripanah, S
Using the Genetic Algorithm based on the Riedel Equation to Predict the Vapor Pressure of Organic Compounds [Volume 31, Issue 6, 2018, Pages 863-869]
-
Jafari-Talookolaei, R. A.
A Novel Metamaterial Microelectromechanical Systems Phase Shifter with High Phase Shift and High Bandwidth [Volume 32, Issue 8, 2019, Pages 1163-1168]
-
Jafarmadar, S
Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation [Volume 31, Issue 7, 2018, Pages 1082-1087]
-
Jafarmadar, S.
Effects of Triple Injection Strategies on Performance and Pollutant Emissions of a DI Diesel Engine Using CFD Simulation [Volume 31, Issue 6, 2018, Pages 973-979]
-
Jafarmadar, S.
Energy and Exergy Analysis of a New Power, Heating, Oxygen and Hydrogen Cogeneration Cycle Based on the Sabalan Geothermal Wells [Volume 32, Issue 3, 2019, Pages 445-450]
-
Jafarmadar, S.
Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena [Volume 32, Issue 4, 2019, Pages 569-579]
-
Jafarmadar, S.
Experimental Comparison the Effect of Mn2O3 and Co3O4 Nano Additives on the Performance and Emission of SI Gasoline Fueled with Mixture of Ethanol and Gasoline [Volume 32, Issue 5, 2019, Pages 769-776]
-
Jafarmadar, S.
Thermodynamic Investigation and Optimization of a Power Generation System Based Solid Oxide Fuel Cell Using Taguchi Approach [Volume 32, Issue 7, 2019, Pages 1040-1048]
-
Jafarmadar, S.
Modeling and Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with an Oxygenated Fuel by Using an Exergoeconomic Methodology for Power, Heating and Cooling Production [Volume 33, Issue 3, 2020, Pages 477-485]
-
Jafarmadar, S.
Thermodynamic Analysis of New Cogeneration Cycle Based on Gaynarje Hotspring [Volume 33, Issue 6, 2020, Pages 1149-1155]
-
Jafarmadar, S.
Experimental Study of Management Systems for Emission Reduction in Ignition Engines [Volume 33, Issue 7, 2020, Pages 1347-1353]
-
Jafarmadar, S.
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Jafarmadar, S.
Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
-
Jafarmadar, samad
Multi-Dimensional Modeling of the Effects of Split Injection Scheme on Combustion and Emissions of Direct-Injection Diesel Engines at Full Load State [Volume 22, Issue 4, 2009, Pages 369-378]
-
Jafarmadar, samad
Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
-
Jafarmadar, samad
Multi-Dimensional Modeling of the Effects of Spilt Injection Scheme on Performance and Emissions of IDI Diesel Engines [Volume 25, Issue 2, 2012, Pages 135-146]
-
Jafarmadar, samad
The Numerical Exergy Analysis of H2/Air Combustion with Detailed Chemical Kinetic Simulation Model [Volume 25, Issue 3, 2012, Pages 239-248]
-
Jafarmadar, samad
Three Dimensional Modeling of Combustion Process and Emissions Formationin Pre and Main Chambers of an Idirect Injection Diesel Enginge [Volume 25, Issue 4, 2012, Pages 311-320]
-
Jafarmadar, samad
Experimental Studying the Effect of EGR Distribution on the Combustion, Emissions and Perforemance in a Turbocharged DI Diesel Engine [Volume 26, Issue 1, 2013, Pages 73-82]
-
Jafarmadar, samad
The Effects of Pressure Difference in Nozzle’s two Phase Flow on the Quality of Exhaust Mixture [Volume 26, Issue 5, 2013, Pages 553-562]
-
Jafarmadar, samad
Experimental Study of the Effect of Castor Oil Biodiesel Fuel on Performance and Emissions of Turbocharged DI Diesel [Volume 26, Issue 8, 2013, Pages 905-912]
-
Jafarmadar, samad
Experimental Investigation of the Effects of Air Injectionand Injection Timingin a Natural Aspirated DI Diesel Engine [Volume 26, Issue 12, 2013, Pages 1479-1484]
-
Jafarmadar, samad
Numerical Simulation of Flash Boiling Effect in a 3-Dimensional Chamber Using CFD Techniques [Volume 29, Issue 1, 2016, Pages 87-95]
-
Jafarmadar, Samad
Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
-
Jafarmadar, Samad
Investigation of Entropy Generation Through the Operation of an Unlooped Pulsating Heat Pipe [Volume 29, Issue 8, 2016, Pages 1151-1159]
-
Jafarmadar, Samad
Hydraulic Network Modeling to Analyze Stream Flow Effectiveness on Heat Transfer Performance of Shell and Tube Heat Exchangers [Volume 30, Issue 6, 2017, Pages 904-911]
-
Jafarmadar, Samad
Exergy Analysis of a Novel Combined System Consisting of a Gas Turbine, an Organic Rankine Cycle and an Absorption Chiller to Produce Power, Heat and Cold [Volume 32, Issue 9, 2019, Pages 1320-1326]
-
Jafarpour, H.
Standards for Selection of Surfactant Compositions used in Completion and Stimulation Fluids [Volume 36, Issue 9, 2023, Pages 1605-1610]
-
Jafarpour, H.
Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
-
Jafarsadeghi-pournaki, Ilgar
Static Pull-in Analysis of Capacitive FGM Nanocantilevers Subjected to Thermal Moment using Eringen’s Nonlocal Elasticity [Volume 27, Issue 4, 2014, Pages 633-642]
-
Jafarsadeghi-pournaki, Ilgar
Vibration Analysis of Circular Magneto-Electro-Elastic Nano-plates Based on Eringen s Nonlocal Theory [Volume 28, Issue 12, 2015, Pages 1808-1817]
-
Jafarzadeh Marandi, M.
Numerical Evaluation of Two-dimensional Multi-layer Cover System to Regulate Acid Mine Drainage of Tailing Dams [Volume 36, Issue 10, 2023, Pages 1839-1856]
-
J. Afshari, Ahmad
Addressing the Freight Consolidation and Containerization Problem by Recent and Hybridized Meta-heuristic Algorithms [Volume 30, Issue 3, 2017, Pages 403-410]
-
Jagadeeshwar, P
Flow Over an Exponentially Stretching Porous Sheet with Cross-diffusion Effects and Convective Thermal Conditions [Volume 31, Issue 1, 2018, Pages 120-127]
-
Jahanbakhsh, A.
Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
-
Jahanbakhsh Rostami, Mehdi
Optimum Shape Design of a Radiant Oven by the Conjugate Gradient Method and a Grid Regularization Approach [Volume 25, Issue 2, 2012, Pages 167-176]
-
Jahangir, A.
Experimental Investigation of Porosity, Installation Angle, Thickness and Second Layer of Permeable Obstacles on Density Current [Volume 33, Issue 9, 2020, Pages 1710-1720]
-
Jahangir, H.
Evaluation of Seismic Response of Concrete Structures Reinforced by Shape Memory Alloys (Technical Note) [Volume 33, Issue 3, 2020, Pages 410-418]
-
Jahangiri, mansoor
Effect of Particle Size of NaX Zeolite on Adsorption of CO2/CH4 [Volume 29, Issue 1, 2016, Pages 1-7]
-
Jahangoshai Rezaee, Mustafa
Energy Resources Consumption Performance in Iranian Manufacturing Industries by Using Cost/Revenue Efficiency Model [Volume 29, Issue 9, 2016, Pages 1282-1291]
-
Jahani, Z.
An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
-
Jahanian, A.
Drug Discovery Acceleration Using Digital Microfluidic Biochip Architecture and Computer-aided-design Flow [Volume 32, Issue 8, 2019, Pages 1169-1176]
-
Jahanian, O.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Jahanian, Omid
Optimizing Energy Recovery from Marine Diesel Engines: A Thermodynamic Investigation of Supercritical Carbon Dioxide Cycles [(Articles in Press)]
-
Jahanmiri, Mohsen
A Mthod for Generating the Turbulent Intermittency Function [Volume 10, Issue 2, 1997, Pages 91-102]
-
Jahanmiri, Mohsen
Static Pressure Distribution in an Excited Jet: Some Observations (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 81-86]
-
Jahanmiri, Mohsen
On Interaction of T S Waves and 3 D Localized Disturbance in a Divergent Flow Under Zero Pressure Gradient [Volume 13, Issue 4, 2000, Pages 35-42]
-
Jahanmiri, Mohsen
The Perturbation Flow Field Associated With Passage of Turbulent Spot (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 91-98]
-
Jahanmiri, Mohsen
EXPERIMENTAL INVESTIGATION OF DRAG REDUCTION ON AHMED MODEL USING A COMBINATION OF ACTIVE FLOW CONTROL METHODS [Volume 24, Issue 4, 2011, Pages 403-410]
-
Jahanshahi, Ebrahim
Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow [Volume 24, Issue 3, 2011, Pages 301-319]
-
Jahanshahi, M
Highly Sensitive Amperometric Sensor Based on Gold Nanoparticles Polyaniline Electrochemically Reduced Graphene Oxide Nanocomposite for Detection of Nitric Oxide [Volume 31, Issue 2, 2018, Pages 188-195]
-
Jahanshahi, M
Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
-
Jahanshahi, M.
Performance of High-strength Concrete Made with Recycled Ceramic Aggregates (Research Note) [Volume 33, Issue 6, 2020, Pages 1085-1093]
-
Jahanshahi, M.
Generation Process and Performance Evaluation of Engineered Microsphere Agarose Adsorbent for Application in Fluidized-bed Systems [Volume 33, Issue 8, 2020, Pages 1450-1458]
-
Jahanshahi, M.
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Jahanshahi, M.
Extraction of Catechin as a Flavonoid Compound via Molecularly Imprinted Polymers [Volume 35, Issue 5, 2022, Pages 988-995]
-
Jahanshahi, Mohammad Reza
A Simple Approach to Static Analysis of Tall Buildings with a Combined Tube-in-tube and Outrigger-belt Truss System Subjected to Lateral Loading [Volume 25, Issue 3, 2012, Pages 289-300]
-
Jahanshahi, Mohammad Reza
Optimum Location of Outrigger-belt Truss in Tall Buildings Based on Maximization of the Belt Truss Strain Energy [Volume 26, Issue 7, 2013, Pages 693-700]
-
Jahanshahi, Mohsen
Identification of Volatile Organic Compounds from Trichoderma virens (6011) by GC-MS and Separation of a Bioactive Compound via Nanotechnology [Volume 29, Issue 10, 2016, Pages 1347-1353]
-
Jahanshahi, Mohsen
Nanotechnology and Neuroscience Convergence: A Novel Tool for Neurotransmitters Monitoring [Volume 30, Issue 2, 2017, Pages 152-161]
-
Jahanshahia, M.
Plant-Based Calcium Fructoborate as Boron-Carrying Nanoparticles for Neutron Cancer Therapy [Volume 32, Issue 4, 2019, Pages 460-466]
-
Jahantigh, N.
Providing an Analytical Model in Determining Nanofluids [Volume 30, Issue 12, 2017, Pages 1919-1924]
-
Jahantigh, N.
Assessment of Particle-size and Temperature Effect of Nanofluid on Heat Transfer Adopting Lattice Boltzmann Model [Volume 31, Issue 10, 2018, Pages 1749-1759]
-
Jaidaew, P.
Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]
-
Jailani, R
Vertical Ground Reaction Force Gait Patterns During Walking in Children with Autism Spectrum Disorders [Volume 31, Issue 5, 2018, Pages 705-711]
-
Jain, A.
Emission Reduction Strategies for Small Single Cylinder Diesel Engine Using Valve Timing and Swirl Ratio [Volume 33, Issue 8, 2020, Pages 1608-1619]
-
Jain, Aruna
Design of Arrayed Waveguide Grating based Optical Switch for High Speed Optical Networks [Volume 29, Issue 7, 2016, Pages 909-915]
-
Jain, M.
Mathematical Modeling of the Temperature-Dependent Growth of Living Systems [Volume 21, Issue 4, 2008, Pages 319-328]
-
Jain, M.
Mathematical Analysis of MHD Flow of Blood in Very Narrow Capillaries (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 307-315]
-
Jain, M.
Mathematical modeling of blood flow in a stenosed artery under MHD effect through porous medium [Volume 23, Issue 3, 2010, Pages 243-252]
-
Jain, M.
Some Perspectives of Machine Repair Problems [Volume 23, Issue 3, 2010, Pages 253-268]
-
Jain, Madhu
Queue with Heterogeneous Server Under Resequencing Constraint [Volume 9, Issue 3, 1996, Pages 169-174]
-
Jain, Madhu
A Finite Capacity Priority Queue with Discouragement [Volume 11, Issue 4, 1998, Pages 191-196]
-
Jain, Madhu
Single Server Bulk Queue with Service Interruption, Two Phase Repairs and State Dependent Rates [Volume 12, Issue 1, 1999, Pages 21-28]
-
Jain, Madhu
Reliability of Repairable System with Removable Multi-Repairmen [Volume 12, Issue 3, 1999, Pages 155-164]
-
Jain, Madhu
Machine Repair Queueing System with with Non-Reliable Service Stations And Heterogeneous Service Discipline (RESEARCH NOTE) [Volume 12, Issue 4, 1999, Pages 271-276]
-
Jain, Madhu
Reliability of Repairable Multicomponent Redundant System [Volume 13, Issue 4, 2000, Pages 17-22]
-
Jain, Madhu
On Finite Queue with Two Types of Failures and Preemptive Priority (RESEARCH NOTE) [Volume 14, Issue 1, 2001, Pages 65-68]
-
Jain, Madhu
On Two-Echelon Multi-Server Queue with Balking and Limited Intermediate Buffer [Volume 14, Issue 2, 2001, Pages 131-142]
-
Jain, Madhu
Diffusion Process for Multi - Repairmen Machining System with Spares Aand Balking [Volume 15, Issue 1, 2002, Pages 49-56]
-
Jain, Madhu
G G r Machine Repair Problem with Spares and Additional Repairman (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 57-62]
-
Jain, Madhu
Optimization of M G 1 Queue with Vacation (TECHNICAL NOTE) [Volume 15, Issue 2, 2002, Pages 157-160]
-
Jain, Madhu
Maintenance Cost Analysis for Replacement Model with Perfect Minimal Repair [Volume 15, Issue 2, 2002, Pages 161-168]
-
Jain, Madhu
M m m Queue with Balking, Reneging and Additional Servers [Volume 15, Issue 2, 2002, Pages 169-178]
-
Jain, Madhu
State Dependent Multi channel Queuing System with Ordered Entry [Volume 15, Issue 3, 2002, Pages 275-286]
-
Jain, Madhu
M M m K Queue With Additional Servers and Discouragement (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 349-354]
-
Jain, Madhu
Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
-
Jain, Madhu
Diffusion Process for GX/G/M Queuing System with Balking and Reneging [Volume 16, Issue 1, 2003, Pages 47-56]
-
Jain, Madhu
Maximum Entropy Analysis for G/G/1 Queuing System (TECHNICAL NOTE) [Volume 16, Issue 2, 2003, Pages 163-170]
-
Jain, Madhu
Performance Modeling of Machining System with Mixed Standby Components Balking and Reneging [Volume 17, Issue 2, 2004, Pages 169-180]
-
Jain, Madhu
Reliability Analysis of Redundant Repairable System with Degraded Failure [Volume 17, Issue 2, 2004, Pages 171-182]
-
Jain, Madhu
N-Policy for M/G/1 Machine Repair Model with Mixed Standby Components, Degraded Failure and Bernoulli Feedback [Volume 17, Issue 3, 2004, Pages 279-288]
-
Jain, Madhu
State Dependent M/M/C/K/N Machining System with Mixed Spares and Removable Repairmen [Volume 18, Issue 1, 2005, Pages 21-28]
-
Jain, Madhu
Controllable Multi-Server Queue with Balking (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 263-271]
-
Jain, Madhu
Transmission Dynamics of Malaria in Human Host: a Neuro-Fuzzy Approach [Volume 19, Issue 1, 2006, Pages 35-48]
-
Jain, Madhu
Diffusion Process for GGR Machining System with Spares, Balking and Reneging (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 49-54]
-
Jain, Madhu
The Approach of Convergence to Stationary State of Multi Server Queue with Balking (TECHNICAL NOTE) [Volume 20, Issue 1, 2007, Pages 27-34]
-
Jain, Madhu
Probability Model of Decision Making for Successful Transplantation of Non-Cadaveric Organs (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 87-95]
-
Jain, Madhu
Economic Production Quantity Models with Shortage, Price and Stock-Dependent Demand for Deteriorating Items [Volume 20, Issue 2, 2007, Pages 159-168]
-
Jain, Madhu
Transient Analysis of M/M/R Machining System with Mixed Standbys, Switching Failures, Balking, Reneging and Additional Removable Repairmen [Volume 20, Issue 2, 2007, Pages 169-182]
-
Jain, Madhu
Reliability Analysis of K-Out-Of N: G Machining Systems with Mixed Spares and Multiple Modes of Failure (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 243-250]
-
Jain, Madhu
A Mathematical Model for Blood Flow Through Narrow Vessels with Mild-Stenosis (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 99-106]
-
Jain, Madhu
Working Vacation Queue with Second Optional Service and Unreliable Server [Volume 25, Issue 3, 2012, Pages 223-230]
-
Jain, Madhu
Maintainability Policy for Deteriorating System with Inspection and Common Cause Failure (TECHNICAL NOTE) [Volume 26, Issue 6, 2013, Pages 631-640]
-
Jain, Sandeep
Estimation of Network Reliability for a Fully Connected Network with Unreliable Nodes and Unreliable Edges using Neuro Optimization [Volume 22, Issue 4, 2009, Pages 317-332]
-
Jaiswal, R.
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys [Volume 33, Issue 5, 2020, Pages 861-869]
-
Jajuee, B.
Kinetics of Benzyl Chloride Production in a Bench Reactor Under Pressure with Stirrer (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 235-240]
-
Jakarni, F. M.
A Newly Developed Laboratory Slab Roller Compactor (Turamesin): An Overview [Volume 21, Issue 2, 2008, Pages 133-142]
-
Jakhar, Amit
Measurement of Complexity and Comprehension of a Program Through a Cognitive Approach [Volume 28, Issue 11, 2015, Pages 1579-1588]
-
Jalakani, Reza
Reliability analysis of a drilling bit penetration model in oil and gas wells: A case study [(Articles in Press)]
-
Jalali, A.
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Jalali, A.
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Jalali, Abdolrahim
Effect of Initial Local Failure Type on Steel Braced Frame Buildings against Progressive Collapse [Volume 33, Issue 1, 2020, Pages 34-46]
-
Jalali, G.
A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
-
Jalali, M.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Jalali, M.
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Jalali, M. A.
Thrust - Limited Optimal Three - Dimensional Spacecraft Trajectories [Volume 14, Issue 1, 2001, Pages 81-89]
-
Jalali, S.
Plastic Properties and Collapse Investigation of Fine-grained Soil Rehabilitated with Styrene Butadiene Rubber: A Case Study in Kerman, Iran [Volume 36, Issue 10, 2023, Pages 1746-1757]
-
Jalali, T.
Unsteady Free Convection from a Sphere in a Porous Medium with Variable Surface Temperature [Volume 18, Issue 4, 2005, Pages 331-350]
-
Jalali, Yeganeh
DABT-U-Net: Dual Attentive BConvLSTM U-Net with Transformers and Collaborative Patch-based Approach for Accurate Retinal Vessel Segmentation [(Articles in Press)]
-
Jalaly Bidgoly, A.
Rescheduling Unreliable Service Providers in a Dynamic Multi-objective Cloud Manufacturing [Volume 36, Issue 7, 2023, Pages 1310-1321]
-
Jalilehvand, M.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Jalili, B.
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
-
Jalili, B.
A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
-
Jalili, B.
Chemical Reaction-Diffusion Model Around a Vessel for Studying Temperature and Concentration of Three Chemical Species by Finite Element Method [Volume 36, Issue 1, 2023, Pages 171-181]
-
Jalili, B.
Efficiency Optimization Thermal Analysis and Power Output of a Modified Incinerator Plant Using Organic Rankine Cycle [Volume 36, Issue 7, 2023, Pages 1300-1309]
-
Jalili, B.
Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field [Volume 36, Issue 11, 2023, Pages 2087-2101]
-
Jalili, B.
A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
-
Jalili, Mohamad Mahdi
Investigation of Wagon Derailment Moving on Random Rail Irregularities using Nonlinear 3-Dimentional Model (RESEARCH NOTE) [Volume 21, Issue 4, 2008, Pages 385-400]
-
Jalili, P.
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
-
Jalili, P.
A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
-
Jalili, P.
Chemical Reaction-Diffusion Model Around a Vessel for Studying Temperature and Concentration of Three Chemical Species by Finite Element Method [Volume 36, Issue 1, 2023, Pages 171-181]
-
Jalili, P.
Efficiency Optimization Thermal Analysis and Power Output of a Modified Incinerator Plant Using Organic Rankine Cycle [Volume 36, Issue 7, 2023, Pages 1300-1309]
-
Jalili, P.
Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field [Volume 36, Issue 11, 2023, Pages 2087-2101]
-
Jalili, P.
A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
-
Jalili, Shima
Comparison of the Progressive Collapse Resistance of Seismically Designed Steel Shear Wall Frames And Special Steel Moment Frames [Volume 28, Issue 6, 2015, Pages 871-879]
-
Jalili, Soheil
A Node-based Mathematical Model towards the Location Routing Problem with Intermediate Replenishment Facilities under Capacity Constraint [Volume 27, Issue 6, 2014, Pages 911-920]
-
Jalilian, N.
Enhanced Vitamin B12 Production using Chlorella vulgaris [Volume 32, Issue 1, 2019, Pages 1-9]
-
Jalilkhani, M
A Simplified Modal Pushover Analysis-based Method for Incremental Dynamic Analysis of Regular RC Moment-resisting Frames [Volume 31, Issue 2, 2018, Pages 196-203]
-
Jalinouszade, H.
Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
-
Jam, S.
Parallel Implementation of Particle Swarm Optimization Variants Using Graphics Processing Unit Platform [Volume 30, Issue 1, 2017, Pages 48-56]
-
Jamaati, M.
Role of Interatomic Potentials in Simulation of Thermal Transport in Carbon Nanotubes [Volume 30, Issue 8, 2017, Pages 1231-1237]
-
Jamali, J.
A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
-
Jamali, N.
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Jamalinasab, M
Pareto Optimization of Two-element Wing Models with Morphing Flap Using Computational Fluid Dynamics, Grouped Method of Data handling Artificial Neural Networks and Genetic Algorithms [Volume 31, Issue 4, 2018, Pages 666-672]
-
Jamal Omidi, Majid
A Numerical Study on Aluminum Plate Response under Low Velocity Impact [Volume 30, Issue 3, 2017, Pages 439-447]
-
Jamaluddin, M. R
Preliminary Characterization of Corn Cob Ash as an Alternative Material for Ceramic Hollow Fiber Membrane (CHFM/CCA) [Volume 31, Issue 8, 2018, Pages 1389-1397]
-
Jamasri, J.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Jameii, S. M.
A Secure Routing Algorithm for Underwater Wireless Sensor Networks [Volume 31, Issue 10, 2018, Pages 1659-1665]
-
Jameii, S. M.
A Latency Reduction Method for Cloud-fog Gaming based on Reinforcement Learning [Volume 35, Issue 9, 2022, Pages 1674-1681]
-
James, A. E.
A Scale-up Design Procedure for Rotating Biological Contactors [Volume 16, Issue 2, 2003, Pages 133-146]
-
Jami, Mohsen
Evaluation of the Impacting Factors on Sustainable Mining Development, Using the Grey-Decision Making Trial and Evaluation Laboratory Approach [Volume 32, Issue 10, 2019, Pages 1497-1505]
-
Jamialahmadi, M.
Pool Boiling Heat Transfer in Water/Amines Solutions [Volume 21, Issue 2, 2008, Pages 113-131]
-
Jamil, M.
Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 247-260]
-
Jamili, Amin
Train Scheduling Problem with Consideration of Praying Constraint as an Application of Job Shop Scheduling Problem [Volume 27, Issue 7, 2014, Pages 1091-1098]
-
Jamshidi, E.
a New Approximate Solution Technique (Quantized Method) for Simultaneous Gas Solid Reactions [Volume 9, Issue 4, 1996, Pages 181-188]
-
Jamshidi, M
Multiple Destination Influence on Production Scheduling in Multi-element Mines [Volume 31, Issue 1, 2018, Pages 173-180]
-
Jamshidi, M.
Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater [Volume 32, Issue 1, 2019, Pages 10-17]
-
Jamshidi, Masoud
Flexural Behavior of Polyester Polymer Concrete Subjected to Different Chemicals [Volume 28, Issue 7, 2015, Pages 978-983]
-
Jamshidi, Najmeh
Experimental Investigation on the Viscosity of Nanofluids [Volume 25, Issue 3, 2012, Pages 201-210]
-
Jamshidi, R
Bi-level Model for Reliability based Maintenance and Job Scheduling [Volume 31, Issue 3, 2018, Pages 432-439]
-
Jamshidi, V.
Prediction of Solubility of β-Carotene as a Component in a Multicomponent System in High-Pressure Carbon Dioxide [Volume 32, Issue 2, 2019, Pages 201-206]
-
Jamshidi, V.
Simulation of Deposition Detection inside Wellbore by Photon Backscatter Radiography [Volume 33, Issue 12, 2020, Pages 2450-2454]
-
Jamshidi, V.
Numerical Analysis of Backscatter Radiography for Prediction of Pipelines Situation: Their Bursting and Casing Failure Consideration from inside [Volume 35, Issue 2, 2022, Pages 380-386]
-
Jamshidi Aval, H.
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Jamshidi Mokhber, M.
Optimization of HFDS Production from Date Syrup (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 127-134]
-
Jamshidnezhad, Bizhan
A Lean Manufacturing Roadmap for an Automotive Body Assembly Line within Axiomatic Design Framework [Volume 17, Issue 1, 2004, Pages 51-72]
-
Jamshidpour, F.
Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
-
Jamuna Rani, G
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Janalizadeh, S.
A Novel Multi-user Detection Approach on Fluctuations of Autocorrelation Estimators in Non-Cooperative Communication [Volume 33, Issue 4, 2020, Pages 546-551]
-
Janani, M.
Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
-
Janani, V.
Recent Trends in Stabilization of Expansive Soil using Calcined Clay [Volume 36, Issue 1, 2023, Pages 163-170]
-
Janghorban, K.
Strengthening Mechanisms in the Aged 2024 and 7075 Aluminium Alloys [Volume 2, Issue 3, 1989, Pages 144-151]
-
Janghorban, K.
Construction of Deformation - Mechanism Maps for Metals and Solid Solution Alloys a New Approach [Volume 3, Issue 1, 1990, Pages 31-36]
-
Jannesari, A.
High Energy Release-high Retraction Smart Polymer Fibers used in Artificial Muscle Fabrication [Volume 36, Issue 4, 2023, Pages 788-796]
-
Janota, A.
Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
-
Jantakun, A.
Mixed-mode Multiphase Sinusoidal Oscillators using Differential Voltage Current Conveyor Transconductance Amplifiers and Only Grounded Passives Components [Volume 36, Issue 5, 2023, Pages 1023-1033]
-
Japper-Jaafar, A.
Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil [Volume 32, Issue 1, 2019, Pages 18-27]
-
Jaqin, C.
Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle [Volume 33, Issue 11, 2020, Pages 2245-2251]
-
Jarchi, S.
Dual-band, Dynamically Tunable Plasmonic Metamaterial Absorbers Based on Graphene for Terahertz Frequencies [Volume 32, Issue 4, 2019, Pages 503-509]
-
Jarchi, Saughar
Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
-
Jarchi, Saughar
A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies [Volume 30, Issue 3, 2017, Pages 338-343]
-
Jariwala, K.
Enhancing Book and Document Digitization from Videos: A Feature Fusion-Based Approach [Volume 37, Issue 3, 2024, Pages 538-545]
-
Jariwala, Krupa
Predictive Analysis for Optimal Text Visibility: A Comprehensive Study on Frame-of-Interest Prediction in Book Digitization Videos [(Articles in Press)]
-
Jaryani, F.
Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
-
Jasemi, Milad
A Nonlinear Autoregressive Model with Exogenous Variables Neural Network for Stock Market Timing: The Candlestick Technical Analysis [Volume 29, Issue 12, 2016, Pages 1717-1725]
-
Jatti, V. S.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Javadi, Akbar
Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
-
Javadi, B.
An Efficient Algorithm to Inter and Intra-Cell Layout Problems in Cellular Manufacturing Systems with Stochastic Demands [Volume 19, Issue 1, 2006, Pages 67-78]
-
Javadi, M.
A Modified Noise Analysis of a Common Source ̶ Common Gate Low Noise Transconductance Amplifier for Sub-micron Technologies [Volume 31, Issue 11, 2018, Pages 1903-1909]
-
Javadi, M.
A Phase Noise Reduction Technique in LC Cross-coupled Oscillators with Adjusting Transistors Operating Regions [Volume 33, Issue 4, 2020, Pages 560-566]
-
Javadi, M. A
Blood Flow Simulation in an Aorta with a mild coarctation Using Magnetic Resonance Angiography and Finite Volume Method [Volume 31, Issue 4, 2018, Pages 673-678]
-
Javadi, Seyed Mohammad
Optimization of Heat Transfer Enhancement of a Flat Plate Based on Pareto Genetic Algorithm [Volume 23, Issue 2, 2010, Pages 177-190]
-
Javadi, Seyed Mohammad
Application of Single Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate [Volume 25, Issue 1, 2012, Pages 67-78]
-
Javadian, M.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Javadian, Mohammad
Improvement of LEACH Protocol Based on Genetic Algorithm to Increase the Network Lifetime of Wireless Sensor Network [(Articles in Press)]
-
Javadian, N.
Solving a Stochastic Cellular Manufacturing Model by Using Genetic Algorithms [Volume 17, Issue 2, 2004, Pages 145-156]
-
Javadian, N.
A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
-
Javadian, N.
A New Approach Applying Multi-objective Optimization using a Taguchi Fuzzy-based for Tourist Satisfaction Management [Volume 32, Issue 3, 2019, Pages 405-412]
-
Javadian, Nikbakhsh
Designing a Meta-Heuristic Algorithm Based on a Simple Seeking Logic [Volume 27, Issue 10, 2014, Pages 1601-1610]
-
Javadian, Nikbakhsh
Multi-period and Multi-objective Stock Selection Optimization Model Based on Fuzzy Interval Approach [Volume 32, Issue 9, 2019, Pages 1306-1311]
-
Javadian, nikbaksh
A Facility Location Problem with Tchebychev Distance in the Presence of a Probabilistic Line Barrier [Volume 25, Issue 4, 2012, Pages 293-302]
-
Javadpour, J.
Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks [Volume 15, Issue 2, 2002, Pages 183-190]
-
Javadpour, J.
Effect of Sintering Conditions on Microstructure and the Superconducting Properties of YBa2Cu3O7 x [Volume 16, Issue 4, 2003, Pages 355-360]
-
Javadpour, J.
Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
-
Javaherdeh, kourosh
Numerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method [Volume 26, Issue 4, 2013, Pages 341-350]
-
Javani, N.
Experimental Study of Management Systems for Emission Reduction in Ignition Engines [Volume 33, Issue 7, 2020, Pages 1347-1353]
-
Javanmard, M.
Instrumentation Readings versus Numerical Analysis of Taham Dam [Volume 32, Issue 1, 2019, Pages 28-35]
-
JAVANMARD, ABOLFAZL
The Effect of Base Position on Maximum Allowable Load of Dual Arm Robots [Volume 28, Issue 2, 2015, Pages 284-294]
-
Javanmardi, S.
Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
-
Javanrouh Givi, R.
Investigating The Effects of Modem Electromagnetic Waves (2.4 GHz) on Electroencephalogram [Volume 32, Issue 8, 2019, Pages 1155-1162]
-
Javdanian, H
Behavioral Interference of Vibrating Machines Foundations Constructed on Sandy Soils (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 548-553]
-
Javdanian, H.
The Effect of Geopolymerization on the Unconfined Compressive Strength of Stabilized Fine-grained Soils [Volume 30, Issue 11, 2017, Pages 1673-1680]
-
Javid, A. H.
A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
-
Javid, A.H.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Javid, Sajjad
Boundary Shear Stress in a Trapezoidal Channel [Volume 25, Issue 4, 2012, Pages 323-332]
-
Javidi, M. M.
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Jawad, F. W.
Vertical and Lateral Displacement Response of Foundation to Earthquake Loading [Volume 33, Issue 10, 2020, Pages 1864-1871]
-
Jawad, H. S.
Sustainable Use of Polypropylene Fibers as a Cement Mortar Reinforcement [Volume 35, Issue 8, 2022, Pages 1494-1500]
-
Jawad, I. T.
Modification of the Properties of Warm Mix Asphalt Using Recycled Plastic Bottles [Volume 31, Issue 9, 2018, Pages 1514-1520]
-
Jawahar, J. G.
Durability Performance of Self Compacting Concrete Incorporating Alccofine and Fly Ash [Volume 33, Issue 8, 2020, Pages 1522-1528]
-
Jay, Jacques
Numerical Study of Interaction of Two Plane Parallel Jets [Volume 29, Issue 10, 2016, Pages 1421-1430]
-
Jayakumari, J
An Efficient Hierarchical Modulation based Orthogonal Frequency Division Multiplexing Transmission Scheme for Digital Video Broadcasting [Volume 31, Issue 4, 2018, Pages 574-579]
-
Jayalakshmi, V.
Conglomerate Energy Efficient Elgamal Encryption Based Data Aggregation Cryptosystems in Wireless Sensor Network [Volume 35, Issue 2, 2022, Pages 417-424]
-
Jayanudin, J.
Effect of Tofu Wastewater Addition on the Growth and Carbohydrate-Protein-Lipid Content of Spirulina platensis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1631-1638]
-
Jazaeri, M.
Irradiation and Temperature Estimation with a New Extended Kalman Particle Filter for Maximum Power Point Tracking in Photovoltaic Systems [Volume 36, Issue 6, 2023, Pages 1099-1113]
-
Jazayeri, H.
Reversible Logic Multipliers: Novel Low-cost Parity-Preserving Designs [Volume 32, Issue 3, 2019, Pages 381-392]
-
Jazayeri, O.
Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
-
Jazayeri, S.A.
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Jazayeriy, H.
Improved Simultaneous Localization and Mapping Estimation using Crow Search Algorithm Based Particle Filter [Volume 36, Issue 10, 2023, Pages 1827-1838]
-
Jazayeriy, H.
Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
-
Jean-François, E. D.
New Approach of Deployment of the Multi-static Radars Based on an Aperture Angle and the Probability of False Alarm [Volume 36, Issue 9, 2023, Pages 1589-1596]
-
Jebadurai, S. V. S.
Experimental Investigation of Toughness Enhancement in Cement Mortar [Volume 31, Issue 11, 2018, Pages 1824-1829]
-
Jenab, K.
The Neural Network Modeling Approach for Long Range Expansion Policy of Power Plant Ccenters [Volume 15, Issue 1, 2002, Pages 75-80]
-
Jenabali Jahromi, S. A.
Strengthening Mechanisms in the Aged 2024 and 7075 Aluminium Alloys [Volume 2, Issue 3, 1989, Pages 144-151]
-
Jenabali Jahromi, S. A.
Creep Life Assessment of Primary Reformer HP40-NB Modified Steel Tube of an Ammonia Plant [Volume 17, Issue 2, 2004, Pages 183-190]
-
Jenabi, M.
Finite Horizon Economic Lot and Delivery Scheduling Problem: Flexible Flow Lines with Unrelated Parallel Machines and Sequence Dependent Setups [Volume 21, Issue 2, 2008, Pages 143-158]
-
Jenabi, M.
A Basic Period Approach for Solving the Economic Lot and Delivery Scheduling in Flexible Flow Lines [Volume 21, Issue 4, 2008, Pages 361-374]
-
Jesthi, D. K
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite [Volume 31, Issue 7, 2018, Pages 1088-1094]
-
Jha, V. A.
Flood Hazard Assessment of Water-Front Geosynthetic Reinforced Soil Wall for Dam Regulation Rule Level [Volume 36, Issue 4, 2023, Pages 640-648]
-
Ji, Feng
Experimental Modeling of a Long Orifice-type Restrictor of High Speed Turbine Hybrid Bearing [Volume 29, Issue 3, 2016, Pages 378-385]
-
Jia, Junfeng
Empirical Seismic Vulnerability and Damage of Bottom Frame Seismic Wall Masonry Structure: A Case Study in Dujiangyan (China) Region [Volume 32, Issue 9, 2019, Pages 1260-1268]
-
Jiang, DaLi
A Modified Discreet Particle Swarm Optimization for a Multi-level Emergency Supplies Distribution Network [Volume 29, Issue 3, 2016, Pages 359-367]
-
Jiang, Dongming
Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
-
Jiang, R.
Characteristics of Shale Gas Reservoir in Jiyang Depression and its Significance in Drilling and Exploitation [Volume 33, Issue 8, 2020, Pages 1677-1686]
-
Jiang, Zhansi
An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
-
Jiayuan, W.
Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
-
Jima, F.
Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
-
Jimenez, R
Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources [Volume 31, Issue 8, 2018, Pages 1215-1221]
-
Jin, Wei
An Analysis Method on Post-earthquake Traversability of Road Network Considering Building Collapse [Volume 32, Issue 11, 2019, Pages 1584-1590]
-
Jithendra, C.
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
Joe, Y. S.
New Approach of Deployment of the Multi-static Radars Based on an Aperture Angle and the Probability of False Alarm [Volume 36, Issue 9, 2023, Pages 1589-1596]
-
Joel Shelton, J.
Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
-
Johari, M.
The Effect of Percentage of Remaining Hair Bred and Ambient Relative Humidity on Electrical Resistance of Cashmere Fiber [Volume 15, Issue 2, 2002, Pages 205-212]
-
Johari, M. S.
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Jokardarabi, Mohammad
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Joladarashi, S.
Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
-
Jolai, F
Bi-objective Build-to-order Supply Chain Problem with Customer Utility [Volume 31, Issue 7, 2018, Pages 1066-1073]
-
Jolai, fariborz
Integrated Competitive Pricing and Transshipment Problem for Short Life Cycle Products’ Supply Chain [Volume 32, Issue 8, 2019, Pages 1192-1199]
-
Jomehzadeh, Emad
Exact Analytical Solution for Bending Analysis of Functionally Graded Annular Sector Plates [Volume 22, Issue 3, 2009, Pages 307-316]
-
Jomehzadeh, Emad
Exact Elasticity Solutions for Thick-Walled FG Spherical Pressure Vessels with Linearly and Exponentially Varying Properties [Volume 22, Issue 4, 2009, Pages 405-416]
-
Jomehzadeh, Emad
Length Scale Effect on Vibration Analysis of Functionally Graded Kirchhoff and Mindlin Micro-Plates [Volume 27, Issue 3, 2014, Pages 431-440]
-
Jonas, J. J.
Effect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling [Volume 5, Issue 1, 1992, Pages 49-60]
-
Jonathan, Y. C. E.
Prospect of Emission Reduction Standard for Sustainable Port Equipment Electrification [Volume 31, Issue 8, 2018, Pages 1347-1355]
-
Jond, H. B.
Autonomous Vehicle Convoy Formation Control with Size/Shape Switching for Automated Highways [Volume 33, Issue 11, 2020, Pages 2174-2180]
-
Jongvivatsakul, P.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Joodaki, A
Numerical Analysis of Fully Developed Flow and Heat Transfer in Channels with Periodically Grooved Parts (TECHNICAL NOTE) [Volume 31, Issue 7, 2018, Pages 1129-1138]
-
Jooei, P.
Semi-active Control of Building Structures using Variable Stiffness Device and Fuzzy Logic [Volume 26, Issue 10, 2013, Pages 1169-1182]
-
Jooya, Mohammad
Plasticity Effect on Residual Stresses Measurement Using Contour Method [Volume 26, Issue 10, 2013, Pages 1203-1212]
-
Jorjani, S.
the Benefication Studies of Garnet Deposits From Kohe-E-Garbi Area of Iran (TECHNICAL NOTE) [Volume 12, Issue 2, 1999, Pages 123-135]
-
Joseph, Rubert
Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
-
Joshaghani, A. H.
Thermodynamic Modeling the Solubility of CO2 in Aqua System of Methyldiethanolamine and 2-(2-Aminoethylamino)ethanol Using the Nonelectrolyte Wilson Nonrandom Factor [Volume 33, Issue 12, 2020, Pages 2436-2442]
-
Joshaghani, A. H.
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
-
Joshi, A. R.
Application of Class C Fly Ash and Quarry Dust Mix for Utilization as Subbase Material in Flexible Pavement [Volume 36, Issue 9, 2023, Pages 1597-1604]
-
Joudaki, E.
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
-
Joudaki, E.
Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
-
Joudaki, J
Ovality and Bow Defect of Pre-punched Sheets in Roll Forming of Trapezoidal Sections [Volume 31, Issue 7, 2018, Pages 1123-1128]
-
Joudaki, J.
Investigation of Laser Cutting of Thin Polymethyl Methacrylate Sheets by Response Surface Methodology [Volume 37, Issue 3, 2024, Pages 484-495]
-
Joudaki, Jalal
A Comprehensive Study of the Hydroforming Process of Metallic Bellows: Investigation and Multi-objective Optimization of the Process Parameters [Volume 32, Issue 11, 2019, Pages 1681-1688]
-
Jozvaziri, Mohammad Ali
Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]
-
Jubear, A.
An Experimental Investigation of Enclosure’s Effect on Noise Reduction in Portable Generators (Technical Note) [Volume 33, Issue 2, 2020, Pages 350-356]
-
Julio, E.
Synthesis of Polyvinyl Alcohol-Chitosan Composite Film using Nanocellulose from Coconut Fibers (Cocos nucifera) [Volume 36, Issue 11, 2023, Pages 1993-2003]
-
Julistiono, H.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Juneja, Kapil
High-performance and Low-power Clock Branch Sharing Pseudo-NMOS Level Converting Flip-flop [Volume 26, Issue 3, 2013, Pages 315-322]
-
Junfeng, J.
Investigation and Analysis of Empirical Field Seismic Damage to Bottom Frame Seismic Wall Masonry Structure [Volume 32, Issue 8, 2019, Pages 1082-1089]
-
Junian, Siti
Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types [Volume 29, Issue 9, 2016, Pages 1257-1262]
-
Junnan, L.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Jureje, U.
Basic Engineering Properties of Concrete with Refractory Brick as Coarse Aggregate: Compressive Stress-Time Relationship Assessment [Volume 37, Issue 5, 2024, Pages 931-940]
-
Jyothirmayee, B.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
K
-
K, ANNAMALAI
Design and Analysis of Pressure Vessel Subjected to Pressure-temperature Variation (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 58-64]
-
K, BASKARAN
Stability Assessment Metamorphic Approach (SAMA) for Effective Scheduling based on Fault Tolerance in Computational Grid [Volume 27, Issue 5, 2014, Pages 699-708]
-
K, Girija Sravani
Design and Performance Analysis of Charge Plasma Tunnel Field Effect Transistor (CP-TFET) for Digital, Analog, and RF Applications [(Articles in Press)]
-
K, Girija Sravani
Design and Simulation of Silicon Germanium Based Double Gate Tunnel FET [(Articles in Press)]
-
K, Girija Sravani
Design and Simulation of Silicon Germanium Based Full Gate Tunnel FET [(Articles in Press)]
-
K, Gopikrishna
Influence of Real Ground Motion Records in Performance Assessment of RC Buildings [Volume 32, Issue 12, 2019, Pages 1745-1752]
-
K, Ramya
Implementation of Control Variables to Exploit Output Power for SRGs in Single Pulse Mode Operation [Volume 29, Issue 4, 2016, Pages 505-513]
-
K, Rohith
Design and Performance Analysis of Charge Plasma Tunnel Field Effect Transistor (CP-TFET) for Digital, Analog, and RF Applications [(Articles in Press)]
-
K, Rohith Sai
Design and Simulation of Silicon Germanium Based Double Gate Tunnel FET [(Articles in Press)]
-
K, Rohith Sai
Design and Simulation of Silicon Germanium Based Full Gate Tunnel FET [(Articles in Press)]
-
Kaabi, H .
A Novel Data Compression Technique for 420 Ma Current Loop Transmitters [Volume 14, Issue 1, 2001, Pages 35-40]
-
Kaafi, P.
Retrofitting and Rehabilitation in Steel Moment-resisting Frame with Prestressed Concrete Slab against Progressive Collapse Potential [Volume 35, Issue 1, 2022, Pages 53-72]
-
Kaatuzian, H.
Simulation and Design of an Organic Quantum Film Electrooptic Switch [Volume 8, Issue 4, 1995, Pages 191-198]
-
Kaayem, A. H.
Study on Iraqi Bauxite Ceramic Reinforced Aluminum Metal Matrix Composite Synthesized by Stir Casting [Volume 33, Issue 7, 2020, Pages 1331-1339]
-
Kabir, E.
A New Algorithm for the Deinterleaving of Radar Pulses [Volume 10, Issue 3, 1997, Pages 143-152]
-
Kabiri, P.
A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]
-
Kabiri naeini, Mehdi
A New Statistical Approach for Recognizing and Classifying Patterns of Control Charts (RESEARCH NOTE) [Volume 28, Issue 7, 2015, Pages 1040-1048]
-
Kabiri naeini, Mehdi
Pattern Recognition in Control Chart Using Neural Network based on a New Statistical Feature [Volume 30, Issue 9, 2017, Pages 1372-1380]
-
Kabiri Naeini, M.
A Queuing Model for Stochastic Location-inventory Problem with Waiting Cost Considerations [Volume 31, Issue 6, 2018, Pages 959-966]
-
Kaboli, A.
A Holistic Approach Based on MCDM for Solving Location Problems [Volume 20, Issue 3, 2007, Pages 251-262]
-
Kabudian, S. J.
Projectiles Optimization: A Novel Metaheuristic Algorithm for Global Optimization [Volume 33, Issue 10, 2020, Pages 1924-1938]
-
Kadam, V.
Hybrid Beamforming for Dual Functioning Multi-input Multi-output Radar using Dimension Reduced-baseband Piecewise Successive Approximation [Volume 36, Issue 1, 2023, Pages 182-190]
-
Kader, S. B. A.
Prospect of Emission Reduction Standard for Sustainable Port Equipment Electrification [Volume 31, Issue 8, 2018, Pages 1347-1355]
-
Kadhim, H. M.
Static and Dynamic Behavior of High-strength Lightweight Reinforced Concrete One-way Ribbed Slabs [Volume 35, Issue 4, 2022, Pages 732-739]
-
Kadhim, M. J.
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Kadhim, Safa
Surveying the Structural Behavior of Concrete Members Strengthened Using FRP [(Articles in Press)]
-
Kadhum, M. M.
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
Kadivar, M. H.
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Kadivar, M. H.
Vibration Analysis of Double Deck Floating Roof of Storage Tank in Cases of Tube, Ordinary and Thickened Foam Seals [Volume 35, Issue 7, 2022, Pages 1398-1415]
-
KADJA, M
Modeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine [Volume 25, Issue 3, 2012, Pages 211-220]
-
Kadkhodayan, M.
Energy Absorption Analysis and Multi-objective Optimization of Tri-layer Cups Subjected to Quasi-static Axial Compressive Loading [Volume 33, Issue 4, 2020, Pages 686-693]
-
Kadkhodayan, M.
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Kadkhodayan, Mehran
A General Solution for Implicit Time Stepping Scheme in Rate-dependant Plasticity [Volume 26, Issue 6, 2013, Pages 641-652]
-
Kadkhodayan, Mehran
An Investigation into the Deep Drawing of Fiber-Metal Laminates based on Glass Fiber Reinforced Polypropylene [Volume 27, Issue 3, 2014, Pages 349-358]
-
Kadkhodayan, Mehran
A Study on Combination of von Mises and Tresca Yield Loci In Non-Associated Viscoplasticity [Volume 27, Issue 3, 2014, Pages 441-448]
-
Kadkhodayan, Mehran
Elastic/plastic Buckling Analysis of Skew Thin Plates based on Incremental and Deformation Theories of Plasticity using Generalized Differential Quadrature Method [Volume 27, Issue 8, 2014, Pages 1277-1286]
-
Kadkhodayan, Mehran
Non-linear Thermo-mechanical Bending Behavior of Thin and Moderately Thick Functionally Graded Sector Plates Using Dynamic Relaxation Method [Volume 29, Issue 6, 2016, Pages 870-878]
-
Kaedi, M.
Gender Identification of Mobile Phone Users based on Internet Usage Pattern [Volume 36, Issue 2, 2023, Pages 335-347]
-
Kaewkuekool, S.
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Kaewmesri, P.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Kafaee Razavi, M.
Investigating The Effects of Modem Electromagnetic Waves (2.4 GHz) on Electroencephalogram [Volume 32, Issue 8, 2019, Pages 1155-1162]
-
Kaffash, Mohammad Hossein
A Novel Similarity Solution of Turbulent Boundary Layer Flow over a Flat Plate [Volume 28, Issue 11, 2015, Pages 1680-1686]
-
Kafi, M
A Novel Method for Detecting Targets on Inactive Radars Using an Adaptive Processing on the Ambiguity Function (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 916-920]
-
Kafi, M. A.
New Steel Divergent Braced Frame Systems for Strengthening of Reinforced Concrete Frames [Volume 33, Issue 10, 2020, Pages 1886-1896]
-
Kafi Hernashki, R.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Kahrizi, M.
Bit Error Performance for Asynchronous Ds Cdma Systems Over Multipath Rayleigh Fading Channels (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 135-140]
-
Kahrizi, M. R.
Projectiles Optimization: A Novel Metaheuristic Algorithm for Global Optimization [Volume 33, Issue 10, 2020, Pages 1924-1938]
-
Kahrobaee, S.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Kahrobaee, Saeed
Applications of Impedance Plane and Magnetic Differential Permeability in Microstructural Characterization of AISI D2 Tool Steel [Volume 28, Issue 2, 2015, Pages 234-242]
-
Kahrom, M.
Heat Transfer Enhancement of a Flat Plate Boundary Layer Distributed by a Square Cylinder: Particle Image Velocimetry and Temperature-Sensitive Paint Measurements and Proper Orthogonal Decomposition Analysis [Volume 31, Issue 11, 2018, Pages 1962-1971]
-
Kahrom, Mohsen
The Effect of Square Splittered and Unsplittered Rods in Flat Plate Heat Transfer Enhancement [Volume 20, Issue 1, 2007, Pages 83-94]
-
Kahrom, Mohsen
Optimization of Heat Transfer Enhancement of a Flat Plate Based on Pareto Genetic Algorithm [Volume 23, Issue 2, 2010, Pages 177-190]
-
Kahrom, Mohsen
Application of Single Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate [Volume 25, Issue 1, 2012, Pages 67-78]
-
Kahrom, Mohsen
Optimization of Heat Transfer Enhancement of a Domestic Gas Burner Based on Pareto Genetic Algorithm: Experimental and Numerical Approach [Volume 26, Issue 1, 2013, Pages 59-72]
-
Kajbafvala, A.
Formation of Lanthanum Hydroxide Nanostructures: Effect of NaOH and KOH Solvents [Volume 21, Issue 2, 2008, Pages 169-176]
-
Kajla, S
An Experimental Study of Nanofluids Operated Shell and Tube Heat Exchanger with Air Bubble Injection [Volume 31, Issue 1, 2018, Pages 136-143]
-
Kakaee, A. H.
Development of a Moving Finite Element-Based Inverse Heat Conduction Method for Determination of Moving Surface Temperature [Volume 17, Issue 3, 2004, Pages 281-292]
-
Kakaee, A. H.
Measurement of Heat Characteristics of a New Incubator with a Chemical Energy Source [Volume 17, Issue 4, 2004, Pages 319-328]
-
Kakha, G. H.
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Kakha, G. H.
Design of Open Pit Mines using 3D Model in Two-element Deposits under Price Uncertainty [Volume 35, Issue 10, 2022, Pages 1906-1917]
-
Kakha, GH. H.
Push Back Design in Two-element Deposits Incorporating Grade Uncertainty (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1279-1287]
-
Kakooei, S.
Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
-
Kakooei, S.
Further Study of Adsorption of Crude Oils onto Acetylated Corn Silk and its Kinetics and Equilibrium Isotherm [Volume 32, Issue 2, 2019, Pages 229-235]
-
Kalaei, M.H.
Experimental Investigation of Boiling and Condensation Heat Transfer of a Two Phase Closed Thermosyphon [Volume 18, Issue 1, 2005, Pages 1-10]
-
Kalaei, M.H.
Experimental Investigation of Boiling and Condensation Heat Transfer of a two Phase Closed Thermosyphon [Volume 18, Issue 1, 2005, Pages 37-43]
-
Kalantari, Afshin
Seismic Performance Evaluation of Water Pipelines Based on Reliability Analysis (Case study: Jafar Abad-Germi Water Pipeline) [(Articles in Press)]
-
Kalantari, M.
Nonlinear Analysis of a Power Amplifier inc C Band and Load Pull Technique Calculation USING VOLTERRA SERIES [Volume 17, Issue 2, 2004, Pages 131-134]
-
Kalantari, O.
Experimental Evaluation of Surface Alterations Induced in Machining of Ti-6Al-4V Alloy [Volume 33, Issue 3, 2020, Pages 486-493]
-
Kalantari, Zahra
Predicting the buckling Capacity of Steel Cylindrical Shells with Rectangular Stringers under Axial Loading by using Artificial Neural Networks [Volume 28, Issue 8, 2015, Pages 1154-1159]
-
Kalpana, P.
A New Hybrid Framework for Filter based Feature Selection using Information Gain and Symmetric Uncertainty (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 659-667]
-
Kalra, P. K.
Studies with a Generalized Neuron Based PSS on a Multi-Machine Power System [Volume 17, Issue 2, 2004, Pages 131-140]
-
Kalteh, Mohammad
Numerical Investigation of Magnetic Field Effects on Mixed Convection Flow in a Nanofluid-filled Lid-driven Cavity [Volume 26, Issue 10, 2013, Pages 1213-1224]
-
Kamal, N.
Bit Swapping Linear Feedback Shift Register For Low Power Application Using 130nm Complementary Metal Oxide Semiconductor Technology (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1126-1133]
-
Kamal, N. M
Biodiesel Production via Transesterification of Low Grade Cooking Oil over Heterostructure Nano Particles of Ni/Mg/Al2O3 Catalyst [Volume 31, Issue 8, 2018, Pages 1318-1325]
-
Kamali, Hamid Reza
Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
-
Kamali, J.
On Line Identification of the First Markov Parameter of Linear Multivariable Plants (RESEARCH NOTE) [Volume 7, Issue 4, 1994, Pages 225-227]
-
Kamalloo, Amir
Modeling of Compressive Strength of Metakaolin Based Geopolymers by The Use of Artificial Neural Network RESEARCH NOTE) [Volume 23, Issue 2, 2010, Pages 145-152]
-
Kamalloo, Amir
Enhancing Mechanical Strength of Inorganic Geopolymer by Using Phenol Resin [Volume 25, Issue 4, 2012, Pages 325-328]
-
Kamalzadeh Yazdi, M
Application of the Hot Spotting Method for the Straightening of a Large Turbine Rotor [Volume 31, Issue 1, 2018, Pages 110-119]
-
Kamareei, Bahram
Hexadecyl Trimethyl Ammonium Bromide-Modified Montmorillonite as a Low-Cost Sorbent for the Removal of Methyl Red from Liquid-Medium [Volume 29, Issue 1, 2016, Pages 60-67]
-
Kamarehie, B
Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 554-563]
-
Kamarehie, B.
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
-
Kamaruddin, A. H.
Performance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors [Volume 17, Issue 2, 2004, Pages 105-120]
-
Kamaruddin, A. H.
Citronellyl Butyrate Synthesis in Non-Conventional Media Using Packed-Bed Immobilized Candida Rugosa Lipase Reactor [Volume 18, Issue 2, 2005, Pages 153-164]
-
Kamaruddin, Shahrul
House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]
-
Kamarudin, N. H
Preliminary Characterization of Corn Cob Ash as an Alternative Material for Ceramic Hollow Fiber Membrane (CHFM/CCA) [Volume 31, Issue 8, 2018, Pages 1389-1397]
-
Kamarulzaman, F
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Kamatagi, A.
An Experimental Evaluation of Axial Load Bearing Capacity of Belled and Straight Piles Embedded in Sand [Volume 35, Issue 8, 2022, Pages 1599-1607]
-
Kameli, Azadeh
Multi-period and Multi-objective Stock Selection Optimization Model Based on Fuzzy Interval Approach [Volume 32, Issue 9, 2019, Pages 1306-1311]
-
Kamisli Ozturk, Zehra
Multi-objective Solution Approaches for Employee Shift Scheduling Problems in Service Sectors (RESEARCH NOTE) [Volume 32, Issue 9, 2019, Pages 1312-1319]
-
Kammi, Sonay
A Novel Frequency Domain Linearly Constrained Minimum Variance Filter for Speech Enhancement [Volume 33, Issue 1, 2020, Pages 68-74]
-
Kamrani Moghaddam, P
Effects of Far- and Near-Field Multiple Earthquakes on the RC SDOF Fragility Curves Using Different First Shock Scaling Methods [Volume 31, Issue 9, 2018, Pages 1505-1513]
-
Kamyab, M.
FDTD Analysis of Top-Hat Monopole Antennas Loaded with Radially Layered Dielectric [Volume 17, Issue 3, 2004, Pages 251-262]
-
Kamyab, M.
A Study of Electromagnetic Radiation from Monopole Antennas on Spherical-Lossy Earth Using the Finite-Difference Time-Domain Method [Volume 18, Issue 1, 2005, Pages 387-390]
-
Kamyab, M.
A Time-Domain Method for Shape Reconstruction of a Target with Known Electrical Properties (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 43-48]
-
Kandaiah, S.
High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
-
Kang, W.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Kang, X.
Energy Collector Based on Piezoelectric Nano Materials in the Power Supply System to Improve the Efficiency of Industrial Internet of Things (IIoT) for Industry 4.0 [Volume 36, Issue 7, 2023, Pages 1239-1249]
-
Kangi, Fatemeh
A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
-
Kania, D.
An Efficient Algorithm for Output Coding in Pal Based Cplds (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 325-328]
-
Kanjanawanishkul, Kiattisin
Path Following and Velocity Optimizing for an Omnidirectional Mobile Robot [Volume 28, Issue 4, 2015, Pages 537-545]
-
Kanthavelkumaran, N
Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models [Volume 31, Issue 1, 2018, Pages 32-37]
-
Kanthavelkumaran, Natesan
Artificial Neural Network Involved in the Action of Optimum Mixed Refrigerant (Domestic Refrigerator) (TECHNICAL NOTE) [Volume 26, Issue 10, 2013, Pages 1235-1242]
-
Kanthe, V
Combine Use of Fly Ash and Rice Husk Ash in Concrete to Improve its Properties (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1012-1019]
-
Kanthe, V. N.
Early Age Shrinkage Behavior of Triple Blend Concrete [Volume 33, Issue 8, 2020, Pages 1459-1464]
-
Kapoor, R.
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Kapoor, R.
Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
-
Karakhanjan, V.
Theoretical, Scientific and Practical Aspects of the Basic Stages of Cad Cam Designing of Centrifugal Pumps [Volume 5, Issue 3, 1992, Pages 113-118]
-
Karami, A.
Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
-
Karami, Farzad
Tracking and Shape Control of a Micro-cantilever using Electrostatic Actuation [Volume 27, Issue 9, 2014, Pages 1439-1448]
-
Karami, Ghodratollah
Application of Boundera Element Method (Bem) to Two-Dimensional Poisson's Eqation [Volume 2, Issue 3, 1989, Pages 162-167]
-
Karami, Ghodratollah
Earthquake Analysis of Spatial Rod Systems [Volume 3, Issue 3, 1990, Pages 134-147]
-
Karami, Ghodratollah
A Boundary Elements and Particular Integrals Implementation for Thermoelastic Stress Analysis [Volume 15, Issue 2, 2002, Pages 197-204]
-
Karami, M. Reza
A New Algorithm for Voice Activity Detection Based on Wavelet Packets (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 225-232]
-
Karami Mohammadi, R.
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Karami-Mollaee, Ali
Adaptive Fuzzy Dynamic Sliding Mode Control of Nonlinear Systems [Volume 29, Issue 8, 2016, Pages 1075-1086]
-
Karami Mollaei, M.R.
Determination of Fiber Direction in High Angular Resolution Diffusion Images using Spherical Harmonics Functions and Wiener Filter [Volume 29, Issue 3, 2016, Pages 328-336]
-
Karami-Nezhad, Mohamad
Hot Corrosion Behavior of Magnesite – Chromite Refractories Used in Reverberatory Furnaces at Sarcheshmeh Copper Complex [Volume 16, Issue 1, 2003, Pages 71-79]
-
Karamodin, Abbas
Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation [Volume 28, Issue 10, 2015, Pages 1423-1429]
-
Karbasian, A.
Effect of Surface Roughness on Brinell Hardness and Load-Displacement Curves using a Macro Indentation [Volume 36, Issue 5, 2023, Pages 914-924]
-
Karbasiyan, M.
Presenting a Model to Detect the Fraud in Banking using Smart Enabling Tools [Volume 37, Issue 3, 2024, Pages 529-537]
-
Karbassi, Seyed Mehdi
Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]
-
Kareem Jabbar, A.
Application of Cluster Technique for Loss Estimation in Distribution Feeders via Limited Measurement Data [Volume 37, Issue 8, 2024, Pages 1556-1568]
-
Karevan, M.
Understanding the Effect of Interfacial Interphase on the Elastic Response of Hollow Glass Microsphere Reinforced Microcomposites [Volume 35, Issue 5, 2022, Pages 977-987]
-
Karevan, M.
Investigation of Carbon Black/ Polyester Micro-composites: An Insight into Nano-size Interfacial Interactions [Volume 35, Issue 6, 2022, Pages 1135-1143]
-
Karevan, M.
High Energy Release-high Retraction Smart Polymer Fibers used in Artificial Muscle Fabrication [Volume 36, Issue 4, 2023, Pages 788-796]
-
Kargar, A.
Nonlinear Control for Positive Output Super Lift Luo Converter in Stand Alone Photovoltaic System [Volume 33, Issue 2, 2020, Pages 237-247]
-
Kargar, fariborz
A Numerical Investigation on Aerodynamic Coefficients of Solar Troughs Considering Terrain Effects and Vortex Shedding [Volume 28, Issue 6, 2015, Pages 940-948]
-
Karim, Md.
Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
-
Karim, R. A.
Measuring and Benchmarking the Quality Culture Maturity of Construction Companies in Indonesia [Volume 35, Issue 10, 2022, Pages 2027-2039]
-
Karimaee Tabarestani, Mojtaba
Effect of collar on time development and extent of scour hole around cylindrical bridge piers [Volume 25, Issue 1, 2012, Pages 11-16]
-
Karimi, B.
Bus Assignment to Iranian Pilgrims During Pilgrimage [Volume 10, Issue 3, 1997, Pages 153-162]
-
Karimi, B.
The Finite Horizon Economic Lot Scheduling in Flexible Flow Lines [Volume 18, Issue 3, 2005, Pages 273-284]
-
Karimi, B.
Multi-commodity Multimodal Splittable Logistics Hub Location Problem with Stochastic Demands [Volume 31, Issue 11, 2018, Pages 1935-1942]
-
Karimi, G.
Textural and Structural Characterizations of Mesoporous Chitosan Beads for Immobilization of Alpha-Amylase: Diffusivity and Sustainability of Biocatalyst [Volume 32, Issue 2, 2019, Pages 207-216]
-
Karimi, G. ,
A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources [Volume 4, Issue 3, 1991, Pages 115-126]
-
Karimi, Gholamreza
Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
-
Karimi, Gholamreza
Fractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note) [Volume 29, Issue 1, 2016, Pages 49-52]
-
Karimi, G. R.
Ballistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2 [Volume 30, Issue 4, 2017, Pages 516-522]
-
Karimi, Hossein
Designing Incomplete Hub Location-routing Network in Urban Transportation Problem [Volume 26, Issue 9, 2013, Pages 997-1006]
-
Karimi, Hossein
A Node-based Mathematical Model towards the Location Routing Problem with Intermediate Replenishment Facilities under Capacity Constraint [Volume 27, Issue 6, 2014, Pages 911-920]
-
Karimi, Hossein
A Congested Double Path Approach for a Hub Location-allocation Problem with Service Level at Hubs [Volume 28, Issue 7, 2015, Pages 1049-1058]
-
Karimi, Hossein
Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm [Volume 28, Issue 11, 2015, Pages 1624-1633]
-
Karimi, Hossein
Capacitated Single Allocation P-Hub Covering Problem in Multi-modal Network Using Tabu Search [Volume 29, Issue 6, 2016, Pages 797-808]
-
Karimi, J.
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Karimi, M. S.
Effects of Lateral Constraints and Geometrical Characteristics on Deformation Capacity of the Persian Historic Unreinforced Masonry Shear Walls under Uncertainty Conditions [Volume 33, Issue 11, 2020, Pages 2127-2136]
-
Karimi, M. S.
Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
-
Karimi, S.
Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
-
Karimi, Y
The Effects of Newmark Method Parameters on Errors in Dynamic Extended Finite Element Method Using Response Surface Method [Volume 31, Issue 1, 2018, Pages 50-57]
-
Karimian, S.
Power and Ventilation Performance Study in a Modified Vertical Axis Wind Turbine Based on Semi-analytical Approach [Volume 36, Issue 7, 2023, Pages 1331-1342]
-
Karimian-Sarakhs, H.
Development of a New Backward Directional Coupler Based on Perforated Substrates [Volume 36, Issue 2, 2023, Pages 311-320]
-
Karimifar, M.
Rate of Pressure Rise in SI Engine Cylinder and its Relation to Knock (RESEARCH NOTE) [Volume 11, Issue 1, 1998, Pages 53-59]
-
Karimi Ghavareshki, M. H.
Redesigning and Re-planning of Location, Pricing, Inventory and Marketing Decisions in a Multi-channel Distribution Network: A Case Study [Volume 36, Issue 2, 2023, Pages 420-432]
-
Kariminezhad, H.
Experimental Investigations on Behaviour of Rhamnolipid Biosurfactant as a Green Stabilizer for the Biological Synthesis of Gold Nanoparticles [Volume 33, Issue 6, 2020, Pages 1054-1060]
-
Karimipour‎, Kianoush ‎
Removal of Congo Red Anionic Dye from Aqueous Solution Using Polyaniline/TiO2 and Polypyrrole/TiO2 Nanocomposites: Isotherm, Kinetic, and Thermodynamic Studies [Volume 29, Issue 12, 2016, Pages 1659-1669]
-
Karimipour-Fard, P.
Performance Enhancement and Environmental Impact Analysis of a Solar Chimney Power Plant: Twenty-four-hour Simulation in Climate Condition of Isfahan Province, Iran [Volume 30, Issue 8, 2017, Pages 1260-1269]
-
Karimkhany, M.
Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
-
Karimov, Vagif
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Karimpour, H.
Map-merging in Multi-robot Simultaneous Localization and Mapping Process Using Two Heterogeneous Ground Robots [Volume 32, Issue 4, 2019, Pages 608-616]
-
Karimpour, S.R.
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Kariya, Norfarahayu
Investigation of Generic House Components and Their Practical Ways to Be Assessed by House Buyers During Defect Liability Period in Malaysia [Volume 29, Issue 10, 2016, Pages 1354-1363]
-
Karmakar, S.
Improvement of Efficiency of Coal-Fired Steam Power Plant by Reducing Heat Rejection Temperature at Condenser Using Kalina Cycle [Volume 31, Issue 10, 2018, Pages 1789-1795]
-
Karrari, M.
A New Class of Decentralized Interaction Estimators for Load Frequency Control in Multi-Area Power Systems [Volume 16, Issue 4, 2003, Pages 347-356]
-
Karri, Rama
Enhanced Predictions of Tides and Surges through Data Assimilation (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 23-29]
-
Karthik, R.
Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
-
Karthikeyan, C. P.
Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting [Volume 30, Issue 10, 2017, Pages 1573-1582]
-
Karunakaran, N.
Performance Investigation of 405 Stainless Steel Thermosyphon using Cerium (IV) Oxide Nano Fluid [Volume 30, Issue 4, 2017, Pages 575-581]
-
Karuppanan, P.
Study and Analysis of A Simple Self Cascode Regulated Cascode Amplifier [Volume 31, Issue 10, 2018, Pages 1633-1641]
-
Kasaeyan, M.
Application of Boundary Element Method to 3 D Submerged Structures With Open Ends (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 97-104]
-
Kasana, Geeta
Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
-
Kasar, M.
Human Disease Prediction using Machine Learning Techniques and Real-life Parameters [Volume 36, Issue 6, 2023, Pages 1092-1098]
-
Kasar, Manisha
EmoSense: Pioneering Facial Emotion Recognition with Precision Through Model Optimization and Face Emotion Constraints [(Articles in Press)]
-
Kashanian, H.
Feature Dimension Reduction of Multisensor Data Fusion using Principal Component Fuzzy Analysis [Volume 30, Issue 4, 2017, Pages 493-499]
-
Kashefi, Mehrdad
Applications of Impedance Plane and Magnetic Differential Permeability in Microstructural Characterization of AISI D2 Tool Steel [Volume 28, Issue 2, 2015, Pages 234-242]
-
Kashfi, M.
Performance of a Two-stages Gas Gun: Experimental, Analytical and Numerical Analysis [Volume 32, Issue 5, 2019, Pages 759-768]
-
Kashi, E.
Hydrogen Distribution in Refinery with Nonlinear Programming [Volume 18, Issue 2, 2005, Pages 165-176]
-
Kashyzadeh, Kazem Reza
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation [Volume 33, Issue 1, 2020, Pages 148-157]
-
Kashyzadeh, K. R.
Enhanced Autoregressive Integrated Moving Average Model for Anomaly Detection in Power Plant Operations [Volume 37, Issue 8, 2024, Pages 1691-1699]
-
Kasi, Ramesh Kumar
A Novel Protection Guaranteed, Quality of Transmission Aware Routing and Wavelength Assignment Algorithm for All-optical Networks [Volume 28, Issue 7, 2015, Pages 995-1001]
-
Kassa, S.
Energy Efficient Novel Design of Static Random Access Memory Memory Cell in Quantum-dot Cellular Automata Approach [Volume 32, Issue 5, 2019, Pages 720-725]
-
Kassim, K. M.
Supercritical Fluid Extraction of Carotenoid from Microalgae with Projected Thermodynamic Models (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 117-126]
-
Kassou, F
Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
-
Katebi, M.
A Temperature Compensation Voltage Controlled Oscillator Using a Complementary to Absolute Temperature Voltage Reference [Volume 32, Issue 5, 2019, Pages 710-719]
-
Katebi, S.D.
A Numerical Design Technique for a Relay - Type Feedback Control System [Volume 2, Issue 1, 1989, Pages 35-44]
-
Katebi, S.D.
A Robust Control Design Technique for Discrete-Time Systems [Volume 4, Issue 1, 1991, Pages 31-36]
-
Katiyal, Sumant
Optimization Capabilities of LMS and SMI Algorithm for Smart Antenna Systems (RESEARCH NOTE) [Volume 26, Issue 11, 2013, Pages 1393-1400]
-
Kaushik, N.
Experimental Investigations on Microstructural and Mechanical Behavior of Friction Stir Welded Aluminum Matrix Composite [Volume 32, Issue 1, 2019, Pages 162-170]
-
Kaveh, Ali
Calculation of Buckling Load and Eigen Frequencies for Planar Truss Structures with Multi-Symmetry [Volume 24, Issue 4, 2011, Pages 351-366]
-
Kavehrad, M.
Quadrature Amplitude Modulated Digital Radio Transmission Modeling and Simulation [Volume 5, Issue 1, 1992, Pages 33-38]
-
Kaviani, A.
Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
-
Kavianipour, Omid
Vibration Suppression of Fuel Sloshing using Subband Adaptive Filtering (RESEARCH NOTE) [Volume 28, Issue 10, 2015, Pages 1507-1514]
-
Kavimandan, P. Sh.
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Kavimandan, P. S.
Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
-
Kavimandan, Pranoti S
EmoSense: Pioneering Facial Emotion Recognition with Precision Through Model Optimization and Face Emotion Constraints [(Articles in Press)]
-
Kavinesh Sankaar, T. S.
Ballistic Testing and Simulation of Co-continuous Ceramic Composite for Body Armour [Volume 33, Issue 9, 2020, Pages 1792-1796]
-
Kaviyani-Charati, M.
A Robust Optimization Methodology for Multi-objective Location-transportation Problem in Disaster Response Phase under Uncertainty [Volume 31, Issue 11, 2018, Pages 1953-1961]
-
Kavoosi Davoodi, S. M.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Kavyateja, B. V.
Durability Performance of Self Compacting Concrete Incorporating Alccofine and Fly Ash [Volume 33, Issue 8, 2020, Pages 1522-1528]
-
Kayumov, A. A.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Kazazi Darani, S.
A Multi-district Asset Protection Problem with Time Windows for Disaster Management [Volume 31, Issue 11, 2018, Pages 1929-1934]
-
Kazemain, M
Experimental Investigation of Energy Consumption and Performance of Reverse Osmosis Desalination using Design of Experiments Method [Volume 31, Issue 1, 2018, Pages 79-87]
-
Kazemeini, Mohammad
Preparation, Physiochemical and Kinetic Investigations of V2O5/SiO2 Catalyst for the Sulfuric Acid Production [Volume 29, Issue 11, 2016, Pages 1478-1488]
-
Kazemi, A.
Optimization of Lipase Immobilization [Volume 25, Issue 1, 2012, Pages 1-10]
-
Kazemi, A.
A Green Hazardous Waste Location-routing Problem Considering the Risks Associated with Transportation and Population [Volume 33, Issue 11, 2020, Pages 2272-2284]
-
Kazemi, A.
Kinesiological Description of Hippotherapy as a Treatment Modality [Volume 33, Issue 11, 2020, Pages 2347-2355]
-
Kazemi, Admin
Optimal Thermodynamic Design of Turbofan Engines using Multi-objective Genetic Algorithm [Volume 27, Issue 6, 2014, Pages 961-970]
-
Kazemi, Admin
Uncertainties due to Fuel Heating Value and Burner Efficiency on Performance Functions of Turbofan Engines Using Monte Carlo Simulation [Volume 27, Issue 7, 2014, Pages 1139-1148]
-
Kazemi, Ahmad
Assessment of Improvement of Preventive Maintenance Systems Related to the Civil Projects Using Concepts of Value Engineering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1872-1878]
-
Kazemi, F. J.
Effect of Camber and Thickness on the Aerodynamic Properties of an Airfoil in Ground Proximity (RESEARCH NOTE) [Volume 14, Issue 3, 2001, Pages 273-273]
-
Kazemi, M.G.
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Kazemi, M.H.
A New Class of Decentralized Interaction Estimators for Load Frequency Control in Multi-Area Power Systems [Volume 16, Issue 4, 2003, Pages 347-356]
-
Kazemi, M.H.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Kazemi, M. T.
Shear-Flexural Interaction in Analysis of Reduced Web Section Beams using VM Link Element [Volume 20, Issue 1, 2007, Pages 23-35]
-
Kazemi, M. T.
Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers [Volume 24, Issue 1, 2011, Pages 1-18]
-
Kazemi, Reza
Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
-
Kazemi, S.
Separation of Curcumin from Curcuma longa L. and its Conjugation with Silica Nanoparticles for Anti-cancer Activities [Volume 31, Issue 11, 2018, Pages 1803-1809]
-
Kazemi, S.
DPML-Risk: An Efficient Algorithm for Image Registration [Volume 31, Issue 11, 2018, Pages 1862-1869]
-
Kazemi, S.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Kazemi, Sohrab
Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
-
Kazemian, M. E.
Thermodynamic Analysis and Statistical Investigation of Effective Parameters for Gas Turbine Cycle using the Response Surface Methodology [Volume 33, Issue 5, 2020, Pages 894-905]
-
Kazemi-Esfeh, Mohammad
Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE) [Volume 29, Issue 7, 2016, Pages 962-967]
-
Kazemifard, N.
A Novel Hybrid Model for Technology Strategy Formulating in High-tech Industries under Uncertainty: A Case Study [Volume 36, Issue 6, 2023, Pages 1166-1178]
-
Kazemi Moghadam, H.
Foil Application to Reduce Resistance of Catamaran under High Speeds and Different Operating Conditions [Volume 32, Issue 1, 2019, Pages 106-111]
-
Kazemi Mohsenabadi, Saeed
On Coherent Structures of Turbulent Open-channel Flow Above a Rough Bed [Volume 29, Issue 11, 2016, Pages 1520-1529]
-
Kazeminejad, Hosein
An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids [Volume 33, Issue 1, 2020, Pages 28-33]
-
Kazemipoor, Hamed
Solving a bi-objective manpower scheduling problem considering the utility of objective functions [Volume 24, Issue 3, 2011, Pages 251-262]
-
Kazemipour, H.
Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
-
Kazemitabar, J.
Improved Simultaneous Localization and Mapping Estimation using Crow Search Algorithm Based Particle Filter [Volume 36, Issue 10, 2023, Pages 1827-1838]
-
Kazemitabar, S. J.
Fast Unsupervised Automobile Insurance Fraud Detection Based on Spectral Ranking of Anomalies [Volume 33, Issue 7, 2020, Pages 1240-1248]
-
Kazemitabar, S. J.
A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
-
Kazemzadeh, A.
Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages [Volume 22, Issue 2, 2009, Pages 169-178]
-
Kazemzadeh, A.
Synthesis and Characterization of Nanocrystalline Ni3Al Intermetallic during Mechanical Alloying Process [Volume 25, Issue 2, 2012, Pages 89-98]
-
Kazemzadeh Hannani, S.
Natural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls [Volume 15, Issue 3, 2002, Pages 293-302]
-
Kazemzadeh Hannani, S.
Second Law Based Analysis of Fluid Flow in the Regenerator of Pulse Tube Refrigerators [Volume 21, Issue 2, 2008, Pages 181-194]
-
Kazemzadeh Hannani, S.
A “v2-f Based” Macroscopic K-Ε Model for Turbulent Flow through Porous Media [Volume 21, Issue 2, 2008, Pages 195-212]
-
Kazerouni, Seyyed Mohammad
Buckling Analysis of Thin Functionally Graded Rectangular Plates with two Opposite Edges Simply Supported [Volume 23, Issue 2, 2010, Pages 179-192]
-
Ke, Liang
Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine [Volume 29, Issue 1, 2016, Pages 96-102]
-
Keawsawasvong, S.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Kebbati, Youssef
Modular approach for an ASIC integration of electrical drive controls [Volume 24, Issue 2, 2011, Pages 107-118]
-
Kebede, Solomon
Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
-
Kehri, V.
A Comparative Analysis of Wavelet-Based FEMG Signal Denoising with Threshold Functions and Facial Expression Classification Using SVM and LSSVM [Volume 33, Issue 7, 2020, Pages 1249-1256]
-
Keighobadi, J.
Deep Reinforcement Learning with Immersion- and Invariance-based State Observer Control of Wave Energy Converters [Volume 37, Issue 6, 2024, Pages 1085-1097]
-
Keivanloo, Teimoor
Effect of Formation of Ag2Ti4O9 Phase on Photocatalytic Activity of Ag-TiO2 Nanocomposite [Volume 29, Issue 5, 2016, Pages 663-668]
-
Keksin, A. I.
Peculiarities of Abrasive Finishing of Surfaces of Parts Made of Aluminium Alloy of АМts Grade in Magnetic Field [Volume 37, Issue 6, 2024, Pages 1098-1105]
-
Kenarangui, R.
Reliability and Availability Analysis of Fusion Power Plants [Volume 1, Issue 1, 1988, Pages 63-72]
-
Kenarangui, R.
On Line Electric Power Systems State Estimation Using Kalman Filtering (RESEARCH NOTE) [Volume 8, Issue 4, 1995, Pages 233-235]
-
Keramat, Alireza
Waterhammer Caused by Intermittent Pump Failure in Pipe Systems Including Parallel Pump Groups [Volume 29, Issue 4, 2016, Pages 444-453]
-
Keramati, A.
Minimizing the supplying cost of leverage items: a mathematical approach [Volume 24, Issue 3, 2011, Pages 259-274]
-
Keramati, M. A.
A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
-
Keramati, M. A.
New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
-
Keramati Hatkeposhti, R.
Fall Detection using Deep Learning Algorithms and Analysis of Wearable Sensor Data by Presenting a New Sampling Method [Volume 35, Issue 10, 2022, Pages 1941-1958]
-
Keramatlou, Omid
A bi-objective model for locating and allocating in a green closed-loop supply chain by probabilistic customers [(Articles in Press)]
-
Keramatpour, Mehdi
Monitoring and Change Point Estimation of AR(1) Autocorrelated Polynomial Profiles [Volume 26, Issue 9, 2013, Pages 933-942]
-
KERAMATZADEH, Alireza
A New Approach for Low Voltage CMOS based on Current-controlled Conveyors [Volume 27, Issue 5, 2014, Pages 723-730]
-
Kermajani, Mozhgan
Production of Cu-Cr-Zr Alloy Using Electro Slag Remelting Technique (RESEARCH NOTE) [Volume 26, Issue 7, 2013, Pages 713-720]
-
Kermani, Hossein
Seismic Design of Steel Structures Based on Ductility and Incremental Nonlinear Dynamic Analysis [Volume 29, Issue 1, 2016, Pages 23-30]
-
Kermanpur, A
Computer Simulation of Equidxed Eutectic Solidifiction of Metals [Volume 12, Issue 4, 1999, Pages 247-258]
-
Kermanpur, Ahmad
Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
-
Kermanshahi, Mostafa
Robust Design of Dynamic Cell Formation Problem Considering the Workers Interest [Volume 32, Issue 12, 2019, Pages 1790-1797]
-
Kesava Rao, V. V. S.
Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
-
Keshavarz, M.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Keshavarz Alamdari, Eskandar
Thermodynamics of Extraction of Zn2+ from Sulfuric Acid Media with a Mixture of Dehpa and Mehpa [Volume 17, Issue 2, 2004, Pages 191-200]
-
Keshavarz Alamdari, Eskandar
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
-
Keshavarz Alamdari, Eskandar
Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
-
Keshavarzian, B.
Investigation of Shell Side Overall Performance of a Novel Shell-and-Double-Concentric –tube Heat Exchanger with Simple and Perforated Helical Baffles [Volume 36, Issue 11, 2023, Pages 1972-1981]
-
Keshavarz Moraveji, M.
Computational Fluid Dynamic- Two Fluid Model Study of Gas-Solid Heat Transfer in a Riser with Various Inclination Angles [Volume 30, Issue 4, 2017, Pages 464-472]
-
Keshmiri, mehdi
Fingertip Radius Effect of an on-Surface-Manipulated Object [Volume 30, Issue 1, 2017, Pages 134-142]
-
Keshtkar, A.
Inhomogeneous Effects of Temperature Change on the Velocity of Railgun in Three Dimensional Condition [Volume 14, Issue 1, 2001, Pages 41-48]
-
Kessar, A.
Design of a Printed Circuit Board for Real-time Monitoring and Control of Pipeline’s Cathodic Protection System via IoT and a Cloud Platform [Volume 36, Issue 9, 2023, Pages 1667-1676]
-
Ketabchi, Saeed
A New Technique for Image Zooming Based on the Moving Least Squares [Volume 25, Issue 2, 2012, Pages 105-110]
-
Ketabdari, Mohammad Javad
Numerical Study on Improvement of Hydrofoil Performance using Vortex Generators (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 305-313]
-
Keyvanpour, Mohammadreza
Document Image Retrieval Based on Keyword Spotting Using Relevance Feedback [Volume 27, Issue 1, 2014, Pages 7-14]
-
K. G., Shwetha
Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
-
Khabiri, M. M.
3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
-
Khadem, J.
Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
-
Khademhosseini Beheshti, Hamid
Prediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling [Volume 25, Issue 1, 2012, Pages 79-88]
-
Khademhosseini Beheshti, Hamid
Stress Intensity Factor Determination in Functionally Graded Materials, Considering Continuously Varying of Material Properties [Volume 29, Issue 12, 2016, Pages 1741-1746]
-
Khademi, Ehsan
A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
-
Khademi, M.
Adaptive Spectral Separation Two Layer Coding with Error Concealment for Cell Loss Resilience [Volume 13, Issue 2, 2000, Pages 27-44]
-
Khademi, M.
Cooperative Co-Evolving Neural Networks for Robosoccer Simulation [Volume 18, Issue 2, 2005, Pages 207-218]
-
Khademizare, H.
Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
-
Khademi Zare, H
The Integrated Supply Chain of After-sales Services Model: A Multi-objective Scatter Search Optimization Approach [Volume 31, Issue 3, 2018, Pages 422-431]
-
Khademi Zare, H.
Re-configuration of the Relief Network Considering Uncertain Demand and Link Failure in an Earthquake: A Multi-stage Stochastic Programming [Volume 31, Issue 6, 2018, Pages 932-942]
-
Khademi Zare, Hasan
A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
-
Khademi Zare, Hasan
Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
-
Khademi Zare, Hasan
A Robust Two-stage Data Envelopment Analysis Model for Measuring Efficiency: Considering Iranian Electricity Power Production and Distribution Processes [Volume 29, Issue 5, 2016, Pages 646-653]
-
Khademi Zare, Hasan
Minimizing Makespan with Start Time Dependent Jobs in a Two Machine Flow Shop [Volume 29, Issue 6, 2016, Pages 778-787]
-
Khademi Zare, Hasan
Integration of Multi-period Vehicle Routing Problem and Economic Selection of Customers with the Objective of Optimizing Distribution, Sales and Discounts Planning [Volume 29, Issue 12, 2016, Pages 1704-1716]
-
Khademi-Zare, H.
A Closed-loop Supply Chain Network Design Problem in Copper Industry [Volume 33, Issue 10, 2020, Pages 2008-2015]
-
Khader, K.
Mistake Proofing Cam Mechanism Through Six-sigma Process: Case Study on Clothes Printing Machines [Volume 32, Issue 3, 2019, Pages 438-444]
-
Khadiranaikar, R. B.
An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
-
Khadirnaikar, R. B.
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Khadirnaikar, R. B.
Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
-
Khadivi, heydar
A Novel, Simple and Cost Effective Al A356/Al2O3 Nano-composite Manufacturing Route with Uniform Distribution of Nanoparticles [Volume 28, Issue 9, 2015, Pages 1320-1327]
-
Khafagy, S. M.
Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
-
Khairnar, H. P.
Analytical Modeling of Heat Transfer Coefficient Analysis in Dimensionless Number of an Electric Parking Brake Using CFD [Volume 36, Issue 2, 2023, Pages 276-288]
-
Khajavi, R.
Gum Tragacanth Fibers Introducing Primitive GT Fibers (RESEARCH NOTE) [Volume 17, Issue 2, 2004, Pages 201-208]
-
Khajavi, R.
Plastic Properties and Collapse Investigation of Fine-grained Soil Rehabilitated with Styrene Butadiene Rubber: A Case Study in Kerman, Iran [Volume 36, Issue 10, 2023, Pages 1746-1757]
-
Khajenoori, Maryam
Subcritical Water Extraction of Essential Oils from Matricaria Chamomilla L. [Volume 26, Issue 5, 2013, Pages 489-494]
-
Khajiyan Sheini Pour, M.
Investigation of the Effect of L-Ascorbic Acid on Class G Oil Well Cement [Volume 32, Issue 3, 2019, Pages 360-365]
-
Khajouei, M.
Enhanced Vitamin B12 Production using Chlorella vulgaris [Volume 32, Issue 1, 2019, Pages 1-9]
-
Khaki Jamei, M.
Effect of Non-uniform Magnetic Field on Non-newtonian Fluid Separation in a Diffuser [Volume 33, Issue 7, 2020, Pages 1354-1363]
-
Khaki-Sedigh, Ali
On Line Identification of the First Markov Parameter of Linear Multivariable Plants (RESEARCH NOTE) [Volume 7, Issue 4, 1994, Pages 225-227]
-
Khaki-Sedigh, Ali
On the Approximation of Pseudo Linear Systems by Linear Time Varying Systems (RESEARCH NOTE) [Volume 17, Issue 1, 2004, Pages 29-32]
-
Khaki-Sedigh, Ali
Control of Multivariable Systems Based on Emotional Temporal Difference Learning Controller [Volume 17, Issue 4, 2004, Pages 363-376]
-
KhakiSedigh, Ali
Predictive Controlled GSP Performance Improvement with an Integrated ℋ2/ℋ∞ (TECHNICAL NOTE) [Volume 26, Issue 11, 2013, Pages 1289-1298]
-
Khakpour, Fazollah
Using a Novel Concept of Potential Pixel Energy for Object Tracking [Volume 27, Issue 7, 2014, Pages 1023-1032]
-
Khakpour, Z.
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Khaksari, H
Active Noise Cancellation using Online Wavelet Based Control System: Numerical and Experimental Study [Volume 30, Issue 1, 2017, Pages 120-126]
-
Khakshournia, Sharif
Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
-
Khakzadeh, E.
Non-destructive Corrosion Monitoring of Reinforced Concrete Steel Rebars in Chloride Media by Smartphone Magnetic and Analog Hall-Effect Sensors [Volume 36, Issue 9, 2023, Pages 1626-1635]
-
Khalaf, K. S.
Digital Communication Based on Image Security using Grasshopper Optimization and Chaotic Map [Volume 35, Issue 10, 2022, Pages 1981-1988]
-
KHALAF, YOUNUS
Analysis of Temperature Effect on a Crystalline Silicon Photovoltaic Module Performance [Volume 29, Issue 5, 2016, Pages 722-727]
-
Khalafi, Hosein
An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids [Volume 33, Issue 1, 2020, Pages 28-33]
-
Khalaj Hedayati, H. R.
Application of Decoupled Scaled Boundary Finite Element Method to Solve Eigenvalue Helmholtz Problems (Research Note) [Volume 33, Issue 2, 2020, Pages 198-204]
-
Khaled, Z. S. M.
Assessment of Changes in Shear Strength Parameters for Soils below Circular Machine Foundation [Volume 33, Issue 8, 2020, Pages 1491-1498]
-
Khalid Fahmi, A. T. W.
Enhanced Autoregressive Integrated Moving Average Model for Anomaly Detection in Power Plant Operations [Volume 37, Issue 8, 2024, Pages 1691-1699]
-
Khalifehei, K.
Experimental Modeling and Evaluation Sediment Scouring in Riverbeds around Downstream in Flip Buckets [Volume 33, Issue 10, 2020, Pages 1904-1916]
-
Khalifehzadeh, R.
Electrochemical Deposition of Flower-Like Nickel Nanostructures on Well-Defined n-Si (111):H [Volume 21, Issue 2, 2008, Pages 177-182]
-
Khaligh Fard, S.
Electricity Supply Model of Conventional Residential Buildings in Tehran with Priority on Renewable Energy Using Adaptive Fuzzy-neural Inference System [Volume 36, Issue 10, 2023, Pages 1793-1814]
-
Khalighi, Faeze
Investigation of Fluid-structure Interaction by Explicit Central Finite Difference Methods [Volume 29, Issue 5, 2016, Pages 590-598]
-
Khalil-Allafi, Jafar
Titanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process [Volume 26, Issue 7, 2013, Pages 707-712]
-
Khalilarya, S
Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation [Volume 31, Issue 7, 2018, Pages 1082-1087]
-
Khalilarya, S.
Effects of Triple Injection Strategies on Performance and Pollutant Emissions of a DI Diesel Engine Using CFD Simulation [Volume 31, Issue 6, 2018, Pages 973-979]
-
Khalilarya, S.
Experimental Comparison the Effect of Mn2O3 and Co3O4 Nano Additives on the Performance and Emission of SI Gasoline Fueled with Mixture of Ethanol and Gasoline [Volume 32, Issue 5, 2019, Pages 769-776]
-
Khalilarya, S.
Thermodynamic Investigation and Optimization of a Power Generation System Based Solid Oxide Fuel Cell Using Taguchi Approach [Volume 32, Issue 7, 2019, Pages 1040-1048]
-
Khalilarya, S.
Modeling and Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with an Oxygenated Fuel by Using an Exergoeconomic Methodology for Power, Heating and Cooling Production [Volume 33, Issue 3, 2020, Pages 477-485]
-
Khalilarya, S.
Thermodynamic Analysis of New Cogeneration Cycle Based on Gaynarje Hotspring [Volume 33, Issue 6, 2020, Pages 1149-1155]
-
Khalilarya, Sh.
Energy and Exergy Analysis of a New Power, Heating, Oxygen and Hydrogen Cogeneration Cycle Based on the Sabalan Geothermal Wells [Volume 32, Issue 3, 2019, Pages 445-450]
-
Khalilarya, Shahram
A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System [Volume 28, Issue 4, 2015, Pages 608-617]
-
Khalil Arya, S.
Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
-
Khalil Arya, S.
Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
-
Khalil Arya, S.
Hydraulic Network Modeling to Analyze Stream Flow Effectiveness on Heat Transfer Performance of Shell and Tube Heat Exchangers [Volume 30, Issue 6, 2017, Pages 904-911]
-
Khalil Arya, Shahram
Exergy Analysis of a Novel Combined System Consisting of a Gas Turbine, an Organic Rankine Cycle and an Absorption Chiller to Produce Power, Heat and Cold [Volume 32, Issue 9, 2019, Pages 1320-1326]
-
Khalili, K.
Prediction of Tool Force in Two Point Incremental Forming by Slab Analysis [Volume 33, Issue 11, 2020, Pages 2399-2407]
-
Khalili, K.
Studying the Effective Parameters on Teeth Height in Internal Gear Flowforming Process [Volume 33, Issue 12, 2020, Pages 2563-2571]
-
Khalili, S.
Survival of Lactobacillus Acidophilus as Probiotic Bacteria using Chitosan Nanoparticles [Volume 30, Issue 4, 2017, Pages 456-463]
-
Khalili, Saeed
Hotel Location Problem Using Erlang Queuing Model under Uncertainty (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1879-1887]
-
Khalili, V.
Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
-
Khalili, Vahid
Effect of Material Wet on Silo Obstruction Solution by Impact (TECHNICAL NOTE) [Volume 29, Issue 11, 2016, Pages 1628-1634]
-
Khalili, Vida
Titanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process [Volume 26, Issue 7, 2013, Pages 707-712]
-
Khalilian, M.
Numerical Analysis on Flow Characteristics of Gas-liquid Two-phase Flow in a Vertical Pipe with Downward Stream [Volume 36, Issue 3, 2023, Pages 540-547]
-
Khalili-Damghani, K.
Designing a Sustainable Reverse Logistics Network Considering the Conditional Value at Risk and Uncertainty of Demand under Different Quality and Market Scenarios [Volume 33, Issue 11, 2020, Pages 2252-2271]
-
Khalili-Damghani, K.
Reduction of Insolvency Risk and Total Costs in Banking Sector using Partners Selection Approach with Genetic Algorithm and Multilayer Perceptron Neural Network [Volume 37, Issue 8, 2024, Pages 1667-1690]
-
Khalili-Damghani, Kaveh
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach [Volume 33, Issue 1, 2020, Pages 124-133]
-
Khalilpour, J.
A Novel Method for Detecting Targets on Inactive Radars Using an Adaptive Processing on the Ambiguity Function (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 916-920]
-
Khalilpourazar, Y.
Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]
-
Khalilzadeh, R.
Well-to-wheel Energy Consumption and CO2 Emission Comparison of Electric and Fossil Fuel Buses: Tehran Case Study [Volume 37, Issue 3, 2024, Pages 567-578]
-
Khalkhali, A.
Optimum Design of a Coir Fiber Biocomposite Tube Reinforced with Nano Silica and Nano Clay Powder [Volume 30, Issue 12, 2017, Pages 1894-1902]
-
Khalkhali, Abolfazl
Multi-objective Optimization of a Projectile Tip for Normal Penetration [Volume 26, Issue 10, 2013, Pages 1225-1234]
-
Khalkhali, Abolfazl
Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
-
Khalkhali, Abolfazl
Multi-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [Volume 28, Issue 4, 2015, Pages 583-592]
-
Khalkhali, Abolfazl
Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1663-1670]
-
Khalkhali, Abolfazl
Intake Manifold Flow Assessment on a 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE [Volume 29, Issue 2, 2016, Pages 255-263]
-
Khalvati, F.
Prediction of Noise Transmission Loss and Acoustic Comfort Assessment of a Ventilated Window using Statistical Energy Analysis [Volume 32, Issue 3, 2019, Pages 451-459]
-
Khamedi, R.
Stiffness Prediction of Beech Wood Flour Polypropylene Composite by using Proper Fiber Orientation Distribution Function [Volume 30, Issue 4, 2017, Pages 582-590]
-
Khamforoush, Mehrdad
Application of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 667-674]
-
Khan, A.
Determination of Shock Standoff Distance for Wedge at Supersonic Flow [Volume 32, Issue 7, 2019, Pages 1049-1056]
-
Khan, A.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Khan, Dr. Md. Abdul Hakim
Analysis of Magneto-hydrodynamics Jeffery-Hamel Flow with Nanoparticles by Hermite-Padé Approximation [Volume 28, Issue 4, 2015, Pages 599-607]
-
Khan, H.
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Khan, Rehan
Numerical Investigation of the Influence of Sand Particle Concentration on Long Radius Elbow Erosion for Liquid-Solid Flow [Volume 32, Issue 10, 2019, Pages 1485-1490]
-
Khan, S. A.
On Numerical Investigation of Semi-empirical Relations Representing Local Nusselt Number at Lower Nozzle-target Spacing’s [Volume 32, Issue 1, 2019, Pages 137-145]
-
Khan, S. A.
Control of Nozzle Flow Using Microjets at Supersonic Mach Regime [Volume 32, Issue 7, 2019, Pages 991-998]
-
Khan, Zubair
Precipitation Intensity-Duration-Frequency Functions for the Bannu Region NWFP Pakistan (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 59-63]
-
Khanabdal, S.
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Khanahmadi, Morteza
Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
-
Khanalizadeh Eini, M.
Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
-
Khanbabaie, Reza
A Mechanism Underlying the Electrical Polarity Detection of Sensitive Plant, Mimosa Pudica [Volume 29, Issue 1, 2016, Pages 132-136]
-
Khanbabaie, Reza
Nanotechnology and Neuroscience Convergence: A Novel Tool for Neurotransmitters Monitoring [Volume 30, Issue 2, 2017, Pages 152-161]
-
Khanbabaie, Reza
Common Spatial Patterns Feature Extraction and Support Vector Machine Classification for Motor Imagery with the SecondBrain [Volume 32, Issue 9, 2019, Pages 1284-1289]
-
Khandan, R.
A Parametric Study on Improved Reduced Beam Section Connections with Post-tensioning to Enhance Seismic Resilience [Volume 36, Issue 10, 2023, Pages 1857-1867]
-
Khani Sanij, H.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Khanjani, J.
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Khanjanzadeh, P.
Design of Broaching Tool Using Finite Element Method for Achieving the Lowest Residual Tensile Stress in Machining of Ti6Al4V Alloy [Volume 33, Issue 4, 2020, Pages 657-667]
-
Khanjanzadeh, P.
Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]
-
Khankari, G.
Improvement of Efficiency of Coal-Fired Steam Power Plant by Reducing Heat Rejection Temperature at Condenser Using Kalina Cycle [Volume 31, Issue 10, 2018, Pages 1789-1795]
-
Khanlari, Amir
TARGETING CUSTOMERS: A FUZZY CLASSIFICATION APPROACH [Volume 23, Issue 3, 2010, Pages 323-336]
-
Khanlarzade, Narges
A Non-linear Integer Bi-level Programming Model for Competitive Facility Location of Distribution Centers [Volume 29, Issue 8, 2016, Pages 1131-1140]
-
Khanlarzade, Narges
Critical Path Method for Flexible Job Shop Scheduling Problem with Preemption [Volume 30, Issue 2, 2017, Pages 261-269]
-
Khanmohammadi, M.
Numerical Studies on Performance of Helical Pile-supported Embankments Over Soft Clay [Volume 37, Issue 4, 2024, Pages 596-607]
-
Khanmohammadi, M.
Proposing New Artificial Intelligence Models to Estimate Shear Wave Velocity of Fine-grained Soils: A Case Study [Volume 37, Issue 6, 2024, Pages 1164-1174]
-
Khanmohammadi, S.
Chained Vector Simplex [Volume 1, Issue 2, 1988, Pages 79-84]
-
Khanmohammadi, S.
Single Array and Bound Method (RESEARCH NOTE). [Volume 3, Issue 1, 1990, Pages 71-72]
-
Khanmohammadi, S.
Neural Network Sensitivity to Inputs and Weights and its Application to Functional Identification of Robotics Manipulators [Volume 7, Issue 1, 1994, Pages 7-12]
-
Khanmohammadi, S.
Neural Network Modelling of Optimal Robot Movement Using Branch and Bound Tree [Volume 7, Issue 2, 1994, Pages 95-110]
-
Khanzadi, K.
A Latency Reduction Method for Cloud-fog Gaming based on Reinforcement Learning [Volume 35, Issue 9, 2022, Pages 1674-1681]
-
Kharbat Shadhar, A.
A Novel Methodology for Predicting Roadway Deterioration in Iraq [Volume 36, Issue 1, 2023, Pages 41-49]
-
Khare, N. R.
Real Time Emotion Recognition with AD8232 ECG Sensor for Classwise Performance Evaluation of Machine Learning Methods [Volume 36, Issue 6, 2023, Pages 1040-1047]
-
Kharghanian, Reza
Extracting Vessel Centerlines From Retinal Images Using Topographical Properties and Directional Filters [Volume 25, Issue 4, 2012, Pages 315-324]
-
Kharidar, M. H.
Natural Convection from a Helical Heating Coil to the Surrounding Fluid. [Volume 9, Issue 1, 1996, Pages 29-36]
-
Kharrazi, Y. H. K.
The Effects of Gating Systems on the Soundness of Lost Foam Casting (LFC) Process of Al-Si Alloy (A.413.0) [Volume 20, Issue 2, 2007, Pages 157-166]
-
Khashechi, A. K.
Behavior of Packed Bed Thermal Storage [Volume 17, Issue 2, 2004, Pages 181-192]
-
Khashij, Maryam
Removal of Fe2+ from Aqueous Solution Using Manganese Oxide Coated Zeolite and Iron Oxide Coated Zeolite [Volume 29, Issue 11, 2016, Pages 1587-1594]
-
Khassaf, S.
Effect of Opening Holes on the Hydraulic Performance for Crump Weir [Volume 31, Issue 12, 2018, Pages 2022-2027]
-
Khassaf, S. I.
Experimental Study for Protection of Piers Against Local Scour Using Slots [Volume 32, Issue 2, 2019, Pages 217-222]
-
Khatami, A.
A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
-
Khatami, H.
Experimental Investigation and Statistical Modeling of the Effective Parameters in Charpy Impact Test on AZ31 Magnesium Alloy with V-shape Groove Using Taguchi Method [Volume 33, Issue 12, 2020, Pages 2521-2529]
-
Khatami, H.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Khatami, H.
Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
-
Khatami, R.
Prediction of Sulfate Scale Depositions in Oilfield Operations Using Arithmetic of LR Fuzzy Numbers [Volume 19, Issue 1, 2006, Pages 99-106]
-
Khatamnejad, Hassan
Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
-
Khatamnejad, Hassan
Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation [Volume 31, Issue 7, 2018, Pages 1082-1087]
-
Khatamnejad, Hassan
Simulation of Dual Fuel Combustion of Direct Injection Engine with Variable Natural Gas Premixed Ratio [Volume 32, Issue 9, 2019, Pages 1327-1336]
-
Khatibi Bardsiri, A.
Detecting Fake Websites Using Swarm Intelligence Mechanism in Human Learning [Volume 31, Issue 10, 2018, Pages 1642-1650]
-
Khavarpour, M
Adsorption of Malachite Green from Aqueous Solution by Nanozeolite Clinoptilolite: Equilibrium, Kinetic and Thermodynamic Studies [Volume 31, Issue 1, 2018, Pages 1-11]
-
Khavarpour, M.
Survival of Lactobacillus Acidophilus as Probiotic Bacteria using Chitosan Nanoparticles [Volume 30, Issue 4, 2017, Pages 456-463]
-
Khavarpour, Maryam
Chemical Composition, Antibacterial and Analgesic Activity of Lavandula stoechas Flowers from North of Iran [Volume 32, Issue 8, 2019, Pages 1065-1073]
-
Khavasfar, A.
An Investigation on the Performance of an Imidazoline Based Commercial Corrosion Inhibitor on CO2 Corrosion of Mild Steel [Volume 20, Issue 1, 2007, Pages 35-44]
-
Khavvajia, Ahmad
Large Deflection Analysis of Compliant Beams of Variable Thickness and Non-Homogenous Material under Combined Load and Multiple Boundary Conditions [Volume 25, Issue 4, 2012, Pages 353-362]
-
Khayat, M.
Numerical and Experimental Investigations for Design of a High Performance Micro-hydro-kinetic Turbine [Volume 30, Issue 5, 2017, Pages 785-790]
-
KHAYAT, MORTEZA
Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
-
Khayati, Gholam
Batch Kinetics and Modeling of Alkaline Protease Production by Isolated Bacillus sp. (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 841-847]
-
Khayati, Gholam Reza
Studying of Heat Treatment Influence on Corrosion Behavior of AA6061-T6 by Taguchi Method [Volume 27, Issue 9, 2014, Pages 1423-1430]
-
Khayati, Gholam Reza
Artificial Neural Network Based Prediction Hardness of Al2024-Multiwall Carbon Nanotube Composite Prepared by Mechanical Alloying [Volume 29, Issue 12, 2016, Pages 1726-1733]
-
Khayati, G. R.
Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
-
Khayati, G. R.
Co-TiO2 Nanoparticles as the Reinforcement for Fe Soft Magnetic Composites with Enhanced Mechanical and Magnetic Properties via Pulse Electrodeposition [Volume 33, Issue 10, 2020, Pages 2030-2038]
-
Khayati, G. R.
Modified Particle Swarm Optimization-Artificial Neural Network and Gene Expression Programing for Predicting High Temperature Oxidation Behavior of Ni–Cr–W-Mo Alloys [Volume 33, Issue 11, 2020, Pages 2327-2338]
-
Khayati, G. R.
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Khayati, G.R.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Khayati, G.R.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Khayati, G.R.
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Khayyat, Morteza
Comparison Final Velocity for Land Yacht with a Rigid Wing and Cloth Sail [Volume 22, Issue 1, 2009, Pages 59-68]
-
Khazaee, K. A.
Advance Modelling and Simulation of Industrial Boilers [Volume 11, Issue 2, 1998, Pages 61-72]
-
Khazaei, Mohammad
Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
-
Khazaei Feizabad, M.H.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Khazaei-Poul, Masoud
THEORETICAL AND NUMERICAL STUDY ON THE STRENGTHENED STEEL PLATE SHEAR WALLS BY FRP LAMINATES [Volume 25, Issue 1, 2012, Pages 25-37]
-
Khazai, E.
Simplification of Parameters in a Complex Catchment Model: a Daily Rainfal Data Generation Process [Volume 14, Issue 4, 2001, Pages 313-322]
-
KhazaiePoul, A.
Adaptive Neuro-fuzzy Inference System Prediction of Zn Metal Ions Adsorption by γ-Fe2o3/Polyrhodanine Nanocomposite in a Fixed Bed Column [Volume 31, Issue 10, 2018, Pages 1617-1623]
-
Khecho, A.
Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
-
Khedmati, M.
Time Series Forecasting of Bitcoin Price Based on Autoregressive Integrated Moving Average and Machine Learning Approaches [Volume 33, Issue 7, 2020, Pages 1293-1303]
-
Khedmati, Majid
Monitoring and Change Point Estimation of AR(1) Autocorrelated Polynomial Profiles [Volume 26, Issue 9, 2013, Pages 933-942]
-
Kheirabadi, M. T.
An Effective Model for SMS Spam Detection Using Content-based Features and Averaged Neural Network [Volume 33, Issue 2, 2020, Pages 221-228]
-
Kheiri, Maryam
Numerical Comparison of Turbulent Heat Transfer and Flow Characteristics of SiO2/Water Nanofluid within Helically Corrugated Tubes and Plain Tube [Volume 28, Issue 10, 2015, Pages 1408-1414]
-
Kheirkhah, Mohammad hosein
Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
-
Kheiry, E.
A New Optimization of Segmented Interior Permanent Magnet Synchronous Motor Based on Increasing Flux Weakening Range and Output Torque (Research Note) [Volume 33, Issue 6, 2020, Pages 1122-1127]
-
Khettache, L.
A New Speed Control Approach of Linear Induction Motor Based on Robust RST Controller and Model Reference Adaptive System Estimator [Volume 36, Issue 4, 2023, Pages 630-639]
-
Kheybari, Shahram
Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
-
Kheyroddin, A
Evaluation of Project Critical Success Factors for Key Construction Players and Objectives [Volume 31, Issue 2, 2018, Pages 228-240]
-
Kheyroddin, A.
New Steel Divergent Braced Frame Systems for Strengthening of Reinforced Concrete Frames [Volume 33, Issue 10, 2020, Pages 1886-1896]
-
Kheyrollahi, J.
Experimental Comparison the Effect of Mn2O3 and Co3O4 Nano Additives on the Performance and Emission of SI Gasoline Fueled with Mixture of Ethanol and Gasoline [Volume 32, Issue 5, 2019, Pages 769-776]
-
Khezri, M.
A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
-
Khezri, Razieh
A Fuzzy Rule-based Expert System for the Prognosis of the Risk of Development of the Breast Cancer [Volume 27, Issue 10, 2014, Pages 1557-1564]
-
Khiznyk, G. P.
Prediction of the Efficiency of Hydraulic Fracturing Based on Reservoir Parameters [Volume 36, Issue 12, 2023, Pages 2169-2174]
-
Khlie, K.
Identification of the Patient Requirements Using Lean Six Sigma and Data Mining [Volume 30, Issue 5, 2017, Pages 691-699]
-
Khodadadeghan, Yasaman
A Mathematical Model of a Multi-Criteria Parallel Machine Scheduling Problem: a Genetic Algorithm (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 79-86]
-
Khodadadeh, Y.
Measurement of Heat Characteristics of a New Incubator with a Chemical Energy Source [Volume 17, Issue 4, 2004, Pages 319-328]
-
Khodadadi, M
Analytical Solution of The Laminar Boundary Layer Flow over Semi-Infinite Flat Plate: Variable Surface Temperature [Volume 23, Issue 3, 2010, Pages 215-222]
-
Khodadadi, M
Experimental Investigation on the Viscosity of Nanofluids [Volume 25, Issue 3, 2012, Pages 201-210]
-
Khodadadi, M
Optimal Thermodynamic Design of Turbofan Engines using Multi-objective Genetic Algorithm [Volume 27, Issue 6, 2014, Pages 961-970]
-
Khodadadi, M
Uncertainties due to Fuel Heating Value and Burner Efficiency on Performance Functions of Turbofan Engines Using Monte Carlo Simulation [Volume 27, Issue 7, 2014, Pages 1139-1148]
-
Khodadadi, M.
Studying the Effective Parameters on Teeth Height in Internal Gear Flowforming Process [Volume 33, Issue 12, 2020, Pages 2563-2571]
-
Khodadadi, M.
A Novel Ensemble Deep Learning Model for Building Energy Consumption Forecast [Volume 37, Issue 6, 2024, Pages 1067-1075]
-
Khodadadi, R.
Compressing Face Images Using Genetic and Gray Wolf Meta-heuristic Algorithms Based on Variable Bit Allocation [Volume 36, Issue 4, 2023, Pages 682-697]
-
Khodadadi, Z.
Enhancing Fault Detection in Image Analysis: A Combined Wavelet-Fourier Technique for Advancing Manufacturing Quality Control [Volume 37, Issue 2, 2024, Pages 387-401]
-
Khodajooyan Qomi, M.
Compaction Quality Control of Coarse-grained Soils Using Dynamic Penetration Test Results through Correlation with Relative Compaction Percentages [Volume 36, Issue 3, 2023, Pages 473-480]
-
Khodakarami, M. I.
Application of Decoupled Scaled Boundary Finite Element Method to Solve Eigenvalue Helmholtz Problems (Research Note) [Volume 33, Issue 2, 2020, Pages 198-204]
-
Khodakarami, Vahid
Mixed-Model Assembly Line Balancing with Considering Reliability [Volume 30, Issue 3, 2017, Pages 411-423]
-
Khodapanah Ajirlou, S.
Dynamic Response of Multi-cracked Beams Resting on Elastic Foundation [Volume 31, Issue 11, 2018, Pages 1830-1837]
-
Khodaparast, M.
Evaluation of Dynamic Probing Testing Effect in Hand Excavated Pit on Test Results Using Numerical Modeling [Volume 33, Issue 8, 2020, Pages 1553-1559]
-
Khodaparast, M.
Compaction Quality Control of Coarse-grained Soils Using Dynamic Penetration Test Results through Correlation with Relative Compaction Percentages [Volume 36, Issue 3, 2023, Pages 473-480]
-
Khodaparast, M.
Determination of Blast Impact Range and Safe Distance for a Reinforced Concrete Pile Under Blast Loading [Volume 36, Issue 2, 2023, Pages 384-397]
-
Khodaparast, M.
Development of Light Dynamic Penetrometer for Application in Dense Soil [Volume 36, Issue 11, 2023, Pages 1982-1992]
-
Khoddami, A.
An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
-
Khodsiani, M.
Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
-
Khomarian, N.
Control of Electric Wheelchair Suspension System based on Biodynamic Response of Seated Human Body [Volume 33, Issue 8, 2020, Pages 1629-1636]
-
Khoobkar, A. R.
GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 135-143]
-
Khorami, M.
Lipase Production in Solid State Fermentation Using Aspergillus niger: Response Surface Methodology [Volume 25, Issue 3, 2012, Pages 151-160]
-
Khorami, M.
Phenol Biodegradation Kinetics in the Presence of Supplimentary Substrate [Volume 25, Issue 3, 2012, Pages 181-192]
-
Khorasani, S. M. J.
Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
-
Khorasani, S.M.J
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Khorasani, S.M.J.
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Khordadi, Mohammad
Climate Change Impact on Precipitation Extreme Events in Uncertainty Situation; Passing from Global Scale to Regional Scale [Volume 28, Issue 8, 2015, Pages 1140-1144]
-
Khormali, A.
Investigation of Barium Sulfate Precipitation and Prevention Using Different Scale Inhibitors under Reservoir Conditions [Volume 31, Issue 10, 2018, Pages 1796-1802]
-
Khorram, E.
A Chance Constrained Integer Programming Model for Open Pit Long-Term Production Planning [Volume 21, Issue 4, 2008, Pages 407-418]
-
Khorsandijou, S.M.
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Khorshidi, K.
Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
-
Khorshidi, S.
Investigation of Shell Side Overall Performance of a Novel Shell-and-Double-Concentric –tube Heat Exchanger with Simple and Perforated Helical Baffles [Volume 36, Issue 11, 2023, Pages 1972-1981]
-
Khoshbakhti Saray, R.
A Predictive Model for the Combustion Process in Dual Fuel Engines at Part Loads Using a Quasi Dimensional Multi Zone Model and Detailed Chemical Kinetics Mechanism [Volume 19, Issue 1, 2006, Pages 83-98]
-
Khoshbakhti Saray, R.
Enhancement of Combustion Process in Dual Fuel Engines at Part Loads by using Suitable Techniques [Volume 22, Issue 1, 2009, Pages 77-90]
-
Khoshbakhti Saray, R.
A New Strategy for Reduction of Emissions and Enhancement of Performance Characteristics of Dual Fuel Engines at Part Loads [Volume 23, Issue 1, 2010, Pages 87-104]
-
Khoshbakhti Saray, R.
Optimization of GRI-mech 3.0 Mechanism using HCCI Combustion Models and Genetic Algorithm [Volume 24, Issue 2, 2011, Pages 155-168]
-
Khoshkish, H.
Mathematical Programming Approach To Allocate Local Or National Resources For Bridge Maintenance Rehabilitation & Replacement Planning (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 383-392]
-
Khoshnam, Farhad
Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1525-1532]
-
Khoshnood, Abdul Majid
Vibration Suppression of Fuel Sloshing using Subband Adaptive Filtering (RESEARCH NOTE) [Volume 28, Issue 10, 2015, Pages 1507-1514]
-
Khoshnoodi, M.
Experimental Investigation of Boiling and Condensation Heat Transfer of a Two Phase Closed Thermosyphon [Volume 18, Issue 1, 2005, Pages 1-10]
-
Khoshnoodi, M.
Experimental Investigation of Boiling and Condensation Heat Transfer of a two Phase Closed Thermosyphon [Volume 18, Issue 1, 2005, Pages 37-43]
-
Khoshnoodi, M.
The Effects of Potassium Promoter on the Syngas Conversion of Cobalt Catalysts (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 285-293]
-
Khoshravan-Azar, Esmaeil
Flow and Pressure Distributions in Short Heat Exchanger Cores with Abrupt Entrance and Exit [Volume 1, Issue 2, 1988, Pages 117-128]
-
Khoshravan-Azar, Esmaeil
Heat Transfer in a Column Packed With Spheres [Volume 2, Issue 3, 1989, Pages 152-161]
-
Khoshravan-Azar, Esmaeil
A Numerical Study of Natural Convection and Radiation Interaction in Vertical Circular Pin [Volume 10, Issue 3, 1997, Pages 163-172]
-
Khoshravan-Azar, Esmaeil
Combined Radiation and Natural Convection in Participating Laminar Flow Over a Vertical Circular Pin [Volume 11, Issue 2, 1998, Pages 83-92]
-
Khoshravan-Azar, Esmaeil
Finite Volume Solution of a Cylinder in Cross Flow with Heat Transfer [Volume 15, Issue 3, 2002, Pages 303-314]
-
Khoshravan-Azar, Esmaeil
An Experimental and Theoretical Study of Freezing of Pure Aluminum [Volume 16, Issue 2, 2003, Pages 183-196]
-
Khoshsirat, M.
A Multi-attribute Reverse Auction Framework Under Uncertainty to the Procurement of Relief Items [Volume 31, Issue 12, 2018, Pages 2068-2076]
-
Khosravi, A.
A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
-
Khosravi, A.
Voltage Regulation of a Negative Output Luo Converter Using a PD-PI Type Sliding Mode Current Controller [Volume 32, Issue 2, 2019, Pages 277-285]
-
Khosravi, Alireza
Constrained Nonlinear Optimal Control via a Hybrid BA-SD [Volume 25, Issue 3, 2012, Pages 197-204]
-
Khosravi, Alireza
Parameter Estimation of Loranz Chaotic Dynamic System Using Bees Algorithm [Volume 26, Issue 3, 2013, Pages 257-262]
-
Khosravi, Alireza
Suppression of Chaotic Behavior in Duffing-holmes System using Backstepping Controller Optimized by Unified Particle Swarm Optimization Algorithm [Volume 26, Issue 11, 2013, Pages 1299-1306]
-
Khosravi, H.
Super-resolution of License-plates Using Weighted Interpolation of Neighboring Pixels from Video Frames [Volume 33, Issue 5, 2020, Pages 992-999]
-
Khosravi, H.
A Method for Automatic Lane Detection using a Deep Network [Volume 35, Issue 4, 2022, Pages 802-809]
-
Khosravi, H.
Self-healing Concrete Using Microcapsules Containing Mineral Salts [Volume 37, Issue 4, 2024, Pages 779-793]
-
Khosravi, M.
Experimental Determination of the Optimum Ball Impacts for Solution of Silo Obstruction (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1215-1222]
-
Khosravi, M. H.
Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
-
Khosravi, Mohammad Hossein
Image Denoising Using Anisotropic Diffusion Equations on Reflection and illumination Components of Image [Volume 27, Issue 9, 2014, Pages 1339-1348]
-
Khosravi, Mohammad Hossein
A Novel Image Structural Similarity Index Considering Image Content Detectability Using Maximally Stable Extremal Region Descriptor [Volume 30, Issue 2, 2017, Pages 172-181]
-
Khosravi, Peyman
A Self-starting Control Chart for Simultaneous Monitoring of Mean and Variance of Simple Linear Profiles [Volume 29, Issue 9, 2016, Pages 1263-1272]
-
Khosravian, E.
Design of an Intelligent Controller for Station Keeping, Attitude Control, and Path Tracking of a Quadrotor Using Recursive Neural Networks [Volume 32, Issue 5, 2019, Pages 747-758]
-
Khosravian, E.
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Khosravian, Y.
Mathematical Model for Bi-objective Maximal Hub Covering Problem with Periodic Variations of Parameters [Volume 32, Issue 7, 2019, Pages 964-975]
-
Khosravi Ghasemi, A.
Predicting the Coefficients of Antoine Equation Using the Artificial Neural Network (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1353-1357]
-
Khosrogorji, S.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Khosroshahi, A.A.
Substructure Model for Concrete Behavior Simulation under Cyclic Multiaxial Loading [Volume 21, Issue 4, 2008, Pages 329-346]
-
Khosroshahi, M.E.
Design and Application of a Photoacoustic Sensor for Monitoring the Laser Generated Stress Waves in Optical Fiber [Volume 17, Issue 1, 2004, Pages 1-6]
-
Khosroshahi, M.E.
Characterization of Nd: Yag Laser Radiation Effects on Ti6Al4V Physico-Chemical Properties: An In Vivo Study [Volume 20, Issue 1, 2007, Pages 1-11]
-
Khosrowjerdi, Mohammad Javad
Stability and Performance Attainment with Fixed Order Controller Using Frequency Response [Volume 28, Issue 4, 2015, Pages 553-560]
-
Khotanlou, H
An Empirical Comparison of Distance Measures for Multivariate Time Series Clustering [Volume 31, Issue 2, 2018, Pages 250-262]
-
Khotanlou, Hassan
Automatic Hashtag Recommendation in Social Networking and Microblogging Platforms Using a Knowledge-Intensive Content-based Approach [Volume 32, Issue 8, 2019, Pages 1101-1116]
-
Khrustalev, K.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Khrustalova, S.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Khudhaire, H. Y.
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
Kia, A.
Determination of Optimal Allocation and Penetration Level of Distributed Energy Resources Considering Short Circuit Currents [Volume 33, Issue 3, 2020, Pages 427-438]
-
Kia, G.
HYREP: A Hybrid Low-Power Protocol for Wireless Sensor Networks [Volume 32, Issue 4, 2019, Pages 519-527]
-
Kiahosseini, S. R.
The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
-
Kiakojouri, Foad
Influence of Sudden Column Loss on Dynamic Response of Steel Moment Frames under Blast Loading [Volume 26, Issue 2, 2013, Pages 197-206]
-
Kiakojouri, Foad
Numerical Study of Progressive Collapse in Framed Structures: A New Approach for Dynamic Column Removal (TECHNICAL NOTE) [Volume 26, Issue 7, 2013, Pages 685-692]
-
Kiamehr, Z.
A New Approach to Provide High Water Permeable Polyethersulfone based Nanofiltration Membrane by Air Plasma Treatment [Volume 32, Issue 3, 2019, Pages 354-359]
-
Kianfar, F.
Finding the Best Coefficients in the Objective Function of a Linear Quadratic Control Problem [Volume 4, Issue 3, 1991, Pages 107-114]
-
Kianfar, F.
Dynamic Multi Period Production Planning Problem with Semi Markovian Variable Cost (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 269-274]
-
Kianfar, F.
Simultaneous Due Date Assignment and Lot Sizing with Uncertain Flow Times [Volume 20, Issue 3, 2007, Pages 263-280]
-
Kianfar, F.
The optimal energy carriers substitutes in thermal power plants:A fuzzy linear programming model [Volume 25, Issue 1, 2012, Pages 55-66]
-
Kianfar, F.
Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
-
Kiani, Somayeh
A Comparative Study on Performance of Two Aerobic Sequencing Batch Reactors with Flocculated and Granulated Sludge Treating an Industrial Estate Wastewater: Process Analysis and Modeling [Volume 26, Issue 2, 2013, Pages 105-116]
-
Kianifar, A.
A New Approach in Preliminary Design of Closed Loop Solar Thermal Systems (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 383-390]
-
Kianinezhad, R.
Space Vector Pulse Width Modulation with Reduced Common Mode Voltage and Current Losses for Six-Phase Induction Motor Drive with Three-Level Inverter [Volume 33, Issue 4, 2020, Pages 586-597]
-
Kiani Rashid, A.R.
Graphite Phase Formation in Al Alloyed Ductile Irons [Volume 15, Issue 3, 2002, Pages 261-272]
-
Kianoush, M. R.
Axial Compressive Strength of Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers (FRP) [Volume 18, Issue 1, 2005, Pages 9-19]
-
Kianpour, Mohammad
A New Technique for Image Zooming Based on the Moving Least Squares [Volume 25, Issue 2, 2012, Pages 105-110]
-
Kianvash, A
Parametric Optimization of Electro Spark Microwelding of Aluminum Clad Steel (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1146-1151]
-
Kianvash, A.
The Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools [Volume 5, Issue 3, 1992, Pages 105-112]
-
Kianvash, A.
Effect of Post-Sintering Annealing Treatment on Magnetic Properties of Some Nd Fe b Based Magnets [Volume 15, Issue 1, 2002, Pages 87-96]
-
Kian Yern, C.
Assessment of Structure-Specific Fragility Curves for Soft Storey Buildings Implementing IDA and SPO Approaches [Volume 31, Issue 12, 2018, Pages 2016-2021]
-
Kidwai, F. A.
Crosswalk Utilization by Pedestrian: Perception versus Reality - Case Study of New Delhi [Volume 35, Issue 12, 2022, Pages 2329-2336]
-
Kim, D.
Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
-
Kim, H. S.
FPGA-based of Thermogram Enhancement Algorithm for Non-destructive Thermal Characterization [Volume 31, Issue 10, 2018, Pages 1675-1681]
-
King, S.A.
Finite Element Methods for Convection Diffusion Equation [Volume 4, Issue 3, 1991, Pages 93-100]
-
Kini K., P.
Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
-
Kiran, B. M.
Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
-
Kiran, K. K.
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Kiryanto, K.
Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
-
Kishore, P. S.
Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage [Volume 31, Issue 6, 2018, Pages 980-985]
-
Kiumarsi, A.
Gum Tragacanth Fibers Introducing Primitive GT Fibers (RESEARCH NOTE) [Volume 17, Issue 2, 2004, Pages 201-208]
-
Kiyani, M.
Gypsum Dissolution Effects on the Performance of a Large Dam (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 143-150]
-
Kiyoumarsi, A.
A Novel Technique on the Analytical Calculation of Open-Circuit Flux Density Distribution in Brushless Permanent-Magnet Motor [Volume 17, Issue 1, 2004, Pages 51-58]
-
K K, PADMANABHAN
Experimental Investigation by Cryogenic Treatment of Aluminium 6063 and 8011 and NiCoW Coating to Improve Hardness and Wear (TECHNICAL NOTE) [Volume 29, Issue 6, 2016, Pages 827-833]
-
K. Karegar, H.
A New Approach for Determination of Break Points for Protection Co-Ordination [Volume 16, Issue 2, 2003, Pages 133-142]
-
K. Karegar, H.
A Novel Fuzzy and Artificial Neural Network Representation of Overcurrent Relay Characteristics [Volume 16, Issue 3, 2003, Pages 233-246]
-
Kochnev, A. A.
Influence of Geological and Technological Parameters on Effectiveness of Hydrochloric Acid Treatment of Carbonate Reservoirs [Volume 33, Issue 10, 2020, Pages 2113-2119]
-
Kochura, A. V.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
Kohestani, H.
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
-
Kohli, N.
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Kohnehpooshi, O.
Retrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets [Volume 33, Issue 5, 2020, Pages 770-783]
-
Kohnehpooshi, O.
Experimental Study of the Combined Use of Fiber and Nano Silica Particles on the Properties of Lightweight Self Compacting Concrete [Volume 33, Issue 8, 2020, Pages 1499-1511]
-
Kohnehpooshi, O.
Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
-
Kohnehpooshi, O.
Retrofitting of Reinforced Concrete Beams using Lightweight RC Jacket Containing Silica Nano Particles and Glass Fiber [Volume 35, Issue 11, 2022, Pages 2164-2175]
-
Kok Keong, C
Wave Energy Dissipation Using Perforated and Non Perforated Piles [Volume 31, Issue 2, 2018, Pages 212-219]
-
Kolahdoozan, M.
Mathematical Model of Unsteady Groundwater Flow Through Aquifers and Calibration Via a Non-Linear Optimization Technique [Volume 11, Issue 1, 1998, Pages 1-14]
-
Kolahdoozan, M.
Numerical Modeling of Sediment-flow around Obstacle Inspired by Marine Sponges: Considering Body Configurations [Volume 36, Issue 6, 2023, Pages 1066-1074]
-
Kolaini, A. R.
Steep. Short-Crested Waves and Related Phenomena [Volume 7, Issue 3, 1994, Pages 161-172]
-
Kolbadi nezhad, marzie
Characterization of Polypyrrole-hydroxyethylcellulose/TiO2 Nanocomposite: Thermal Properties and AFM Analysis [Volume 28, Issue 5, 2015, Pages 654-661]
-
Komachi, Yunes
Computation of Earthquake Response via Fourier Amplitude Spectra [Volume 22, Issue 2, 2009, Pages 147-152]
-
Komjani, N.
Analysis of Planar Microstrip Circuits Using Three-Dimensional Transmission Line Matrix Method [Volume 15, Issue 2, 2002, Pages 147-156]
-
Komjani, N.
Modification of Sidelobe Canceller System In Planar Arrays (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 13-20]
-
Kona, S
Experimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite [Volume 31, Issue 4, 2018, Pages 659-665]
-
Konagai, K.
Vertical and Rocking Impedances for Surface Rigid Foundation Resting on a Transversely Isotropic Half-Space [Volume 15, Issue 1, 2002, Pages 1-9]
-
Konagai, K.
Fundamental Steady state Solution for the Transversely Isotropic Half Space [Volume 16, Issue 2, 2003, Pages 105-122]
-
Koo, C. H
Improving Hydrophilicity of Polyethersulfone Membrane Using Silver Nanoparticles for Humic Substances Removal [Volume 31, Issue 8, 2018, Pages 1364-1372]
-
Koochaki, A.
A Novel 19-Level Boost Type Switched-capacitor Inverter with Two DC Sources and Reduced Semiconductor Devices [Volume 36, Issue 2, 2023, Pages 253-263]
-
Koohestani, H.
Investigating the Effect of Ultrasound Intensity on the Magnetic Properties of Magnetite Nanostructures Synthesized by Sonochemical Method [Volume 36, Issue 6, 2023, Pages 1034-1039]
-
Koohi, H.
A Novel Trust Computation Method Based on User Ratings to Improve the Recommendation [Volume 33, Issue 3, 2020, Pages 377-386]
-
Koohi, Hamidreza
Dynamic Obstacle Avoidance by Distributed Algorithm based on Reinforcement Learning (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 198-204]
-
Koohi, HamidReza
Employing Sensor Network to Guide Firefighters in Dangerous Area [Volume 23, Issue 2, 2010, Pages 191-202]
-
Kopteva, Anastasia Igorevna
Analysis of the methodology for selecting the rheological model of cement slurry for determining the technological parameters of well casing [(Articles in Press)]
-
Korani, Ehsan
Modeling of the Capacitated Single Allocation Hub Location Problem with a Hierarchical Approch (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 573-586]
-
Korayem, M. H.
Optimal Trajectory of Flexible Manipulator with Maximum Load Carrying Capacity [Volume 8, Issue 4, 1995, Pages 221-232]
-
Korayem, M. H.
Kinematics and Dynamic Modelling of the Human Shoulder [Volume 14, Issue 3, 2001, Pages 247-254]
-
Korayem, M. H.
Maximum Allowable Load On Wheeled Mobile Manipulators (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 279-292]
-
Korayem, M. H.
Optimal Load of Flexible Joint Mobile Robots Stability Approach [Volume 17, Issue 2, 2004, Pages 193-204]
-
Korayem, M. H.
Experimental Analysis for Measuring Errors in Wheeled Mobile Robots (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 115-133]
-
Korayem, M. H.
Investigation on the Effect of Different Parameters in Wheeled Mobile Robot Error (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 195-210]
-
Korayem, M. H.
Design, Modeling, Implementation and Experimental Analysis of 6R Robot (TECHNICAL NOTE) [Volume 21, Issue 1, 2008, Pages 71-84]
-
Korayem, M. H.
An Intelligent Vision System on a Mobile Manipulator [Volume 21, Issue 3, 2008, Pages 279-294]
-
Korayem, M. H.
Dynamic Analysis of Moving Cables with Variable Tension and Variable Speed [Volume 23, Issue 2, 2010, Pages 157-168]
-
Korchagin, Y. E.
Secrecy of Communications in Data Transmission by Impulses with Unknown Moments of Appearance and Disappearance [Volume 32, Issue 4, 2019, Pages 548-554]
-
Kordani, N
Effect of Ambient Condition on the Shower Cooling Tower in Four Type of Climates Condition [Volume 31, Issue 5, 2018, Pages 841-846]
-
Kordhaghi, F.
Synthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity [Volume 30, Issue 4, 2017, Pages 543-550]
-
Kordzadeh, E.
The Effect of Nickel Increasing and Aluminum Addition on Sulfidation Resistance of Fe-Ni-Cr Alloys (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 161-168]
-
Korelskiy, Denis
Land assessment in mining regions considering ecology [(Articles in Press)]
-
Kornyushin, Denis
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Korobov, Grigory Yurievich
Justification of the development system and measures to increase the productivity of wells in the oil field of the eastern part of the Pechora sea [(Articles in Press)]
-
Korobov, G. Y.
Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
-
Kosari, A.
Centralized Path Planning for Multi-aircraft in the Presence of Static and Moving Obstacles [Volume 33, Issue 5, 2020, Pages 923-933]
-
Kosari, Mohammadreza
Zinc Adsorption Properties of Alginate-SBA-15 Nanocomposite [Volume 28, Issue 10, 2015, Pages 1415-1422]
-
Kosari, Mohammadreza
Adsorptive Behavior of an Amberlite Anion Exchanger Resin for Uranium (VI) Sorption in the Presence of Sulfate Anions [Volume 29, Issue 2, 2016, Pages 170-175]
-
Kosari, Mohammadreza
Uranium Ions Removal Using Amberlite CG-400 Anion Exchanger Resin in the Presence of Sulfate Anions [Volume 29, Issue 6, 2016, Pages 728-734]
-
Kosari, Mohammadreza
Uranium Removal from Aqueous Solution Using Ion-Exchange Resin DOWEX® 2x8 in the Presence of Sulfate Anions [Volume 29, Issue 12, 2016, Pages 1677-1683]
-
Kosari, Mohammadreza
Fluoride Ions Removal using Yttrium Alginate Biocomposite from an Aqueous Solution (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 1-6]
-
Koteleva, N.
Augmented Reality System and Maintenance of Oil Pumps [Volume 33, Issue 8, 2020, Pages 1620-1628]
-
Kothandaraman, S.
Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
-
Kothandaraman, S.
Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint [Volume 35, Issue 7, 2022, Pages 1237-1245]
-
Kouchakyazdi, Zahra
Lipase Catalyzed Incorporation of Conjugated Linoleic Acid by Transesterification into Sunflower Oil Applying Immobilized Lipase (Lipozyme Thermomyces lanuginosus and Rhizomucor mehei) [Volume 29, Issue 4, 2016, Pages 436-443]
-
Kouchak Yazdi, Z
Conjugated Linoleic Acid Production and Optimization Via Catalytic Reaction Method Using Safflower Oil [Volume 31, Issue 8, 2018, Pages 1166-1171]
-
Kouchakzadeh, Mohammad Ali
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Kouhestanian, H.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Kouhi, Sajjad
Economic Aspect of Fuel Cell Power as Distributed Generation [Volume 27, Issue 1, 2014, Pages 57-62]
-
Kovalchuk, V. S.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Kowsari, Milad
STATISTICAL PREDICTION OF THE SEQUENCE OF LARGE EARTHQUAKES IN IRAN [Volume 24, Issue 4, 2011, Pages 325-336]
-
Kowsarnia, Ehsan
EXPERIMENTAL EVALUATION OF BLAST WAVE PARAMETERS IN UNDERWATER EXPLOSION OF HEXOGEN CHARGES [Volume 25, Issue 1, 2012, Pages 65-72]
-
Kowsary, Farshad
Numerical Simulation of Forced Convection of Nanofluids by a Two-Component Nonhomogeneous Model [Volume 23, Issue 1, 2010, Pages 89-99]
-
Kozegar, E.
Pain Facial Expression Recognition from Video Sequences Using Spatio-temporal Local Binary Patterns and Tracking Fiducial Points [Volume 33, Issue 5, 2020, Pages 1038-1047]
-
Kozhevnikov, E. V.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Kozhevnikov, E. V.
Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
-
Kozhukhova, A. E.
Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media [Volume 32, Issue 5, 2019, Pages 641-646]
-
Kozlov, A. V.
Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation [Volume 35, Issue 6, 2022, Pages 1178-1185]
-
Krasnikov, Anton Andreevich
Ultrasonic treatment of a welded joint from the external, internal and two sides on reducing residual welding stresses [(Articles in Press)]
-
Kreshanti, P
Mechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE) [Volume 31, Issue 7, 2018, Pages 1103-1108]
-
Krishna, A.
Energy Harvesting from Vibrating Cantilever Structure of Different Base Materials using Piezoelectric Material: Theoretical and Experimental Approach [Volume 36, Issue 1, 2023, Pages 152-162]
-
Krishna, J.
Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage [Volume 31, Issue 6, 2018, Pages 980-985]
-
Krishnaiah, A.
Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]
-
Krishnakumar, S.
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Krishnamurthy, A.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Krishnamurthy, A.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
-
Krishna Prasad, M. H. M.
Mining Overlapping Communities in Real-world Networks Based on Extended Modularity Gain [Volume 30, Issue 4, 2017, Pages 486-492]
-
Krishna Teja, S. T. G.
Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting [Volume 30, Issue 10, 2017, Pages 1573-1582]
-
Kriswarini, Rosika
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Krivoshchekov, S. N.
Influence of Geological and Technological Parameters on Effectiveness of Hydrochloric Acid Treatment of Carbonate Reservoirs [Volume 33, Issue 10, 2020, Pages 2113-2119]
-
Krykova, T.
Potential of High-Carbon Domanik (Upper Devonian) Shale Deposits: Timan-Pechora Oil and Gas Province Assessment [Volume 37, Issue 8, 2024, Pages 1639-1657]
-
Kubsad, S. S.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Kuchaki Rafsanjani, M.
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
-
Kuchen, B.
Robust Hybrid Motion Force Control Algorithm for Robot Manipulators [Volume 13, Issue 4, 2000, Pages 55-64]
-
Kuchin, Vyacheslav
The potential application of saponite clay for the production of drilling fluids [(Articles in Press)]
-
Kuili, S.
A Numerical Modelling Approach to Assess Deformations of Horseshoe Cavern on Account of Rock Mass Characteristics and Discontinuities [Volume 36, Issue 7, 2023, Pages 1259-1268]
-
Kuldeep, B.
Effect of Hexagonal Boron Nitrate on Microstructure and Mechanical Behavior of Al7075 Metal Matrix Composite Producing by Stir Casting Technique [Volume 32, Issue 7, 2019, Pages 1017-1022]
-
Kulkarni, P.
Improving Thermal and Mechanical Property of Lightweight Concrete Using N-Butyl Stearate/Expanded Clay Aggregate with Alccofine1203 [Volume 33, Issue 10, 2020, Pages 1842-1851]
-
Kulkarni, S. P.
Real Time Emotion Recognition with AD8232 ECG Sensor for Classwise Performance Evaluation of Machine Learning Methods [Volume 36, Issue 6, 2023, Pages 1040-1047]
-
Kumar, A.
Turbofan Engine Performance under Reliability Measures Approach [Volume 30, Issue 4, 2017, Pages 610-619]
-
Kumar, A.
Techno-economic Optimization of a Stand-alone Photovoltaic-battery Renewable Energy System for Low Load Factor Situation- a Comparison between Optimization Algorithms [Volume 30, Issue 10, 2017, Pages 1555-1564]
-
Kumar, A.
Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
-
Kumar, A.
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys [Volume 33, Issue 5, 2020, Pages 861-869]
-
Kumar, A.
Investigation of Dielectric Properties of Ni/n-TiO2/p-Si/Al Heterojunction in Wide Range of Temperature and Voltage [Volume 35, Issue 4, 2022, Pages 698-705]
-
Kumar, A.
Investigation of Dielectric Properties of Ni/n-TiO2/p-Si/Al Heterojunction in Wide Range of Temperature and Voltage [Volume 35, Issue 4, 2022, Pages 698-705]
-
Kumar, A.
Human Disease Prediction using Machine Learning Techniques and Real-life Parameters [Volume 36, Issue 6, 2023, Pages 1092-1098]
-
Kumar, A.
Optimal Filter Length Selection for Universal Filtered Multicarrier Systems [Volume 36, Issue 7, 2023, Pages 1322-1330]
-
Kumar, Alok
Maintenance Cost Analysis for Replacement Model with Perfect Minimal Repair [Volume 15, Issue 2, 2002, Pages 161-168]
-
Kumar, Amit
Reliability Measures Improvement and Sensitivity Analysis of a Coal Handling Unit for Thermal Power Plant [Volume 26, Issue 9, 2013, Pages 1059-1066]
-
Kumar, Anil
MHD FREE CONVECTIVE FLUCTUATING FLOW THROUGH A POROUS EFFECT WITH VARIABLE PERMEABILITY PARAMETER [Volume 23, Issue 3, 2010, Pages 313-322]
-
Kumar, Anil
PERFORMANCE MODEL AND ANALYSIS OF BLOOD FLOW IN SMALL VESSELS WITH MAGNETIC EFFECTS [Volume 25, Issue 2, 2012, Pages 189-196]
-
Kumar, D.
Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
-
Kumar, Dinesh
Oscillatory MHD Flow of Blood through an Artery with Mild Stenosis (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 125-130]
-
Kumar, Dinesh
MATHEMATICAL MODELING AND PERFORMANCE OPTIMIZATION FOR THE DIGESTING SYSTEM OF A PAPER PLANT [Volume 23, Issue 3, 2010, Pages 215-226]
-
Kumar, G.
Experimental Analysis of Square Position on Variable Displacement Electrohydraulic Actuation System by Open Loop Control [Volume 36, Issue 6, 2023, Pages 1185-1192]
-
Kumar, H.
Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
-
Kumar, H.
Viscosity Analysis of Water-based Copper Oxide Nanofluids [Volume 36, Issue 3, 2023, Pages 481-489]
-
Kumar, N.
A Computational Study of Oxygen Transport in the Body of Living Organism (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 39-44]
-
Kumar, N.
A Computational Study of Oxygen Transport in the Body of Living Organism [Volume 18, Issue 4, 2005, Pages 351-358]
-
Kumar, N.
Mathematical Modeling for Homogeneous Tumor with Delay in Time [Volume 22, Issue 1, 2009, Pages 49-56]
-
Kumar, N.
Elastico-Viscous Flow between Two Rotating Discs of Different Transpiration for High Reynolds Numbers (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 115-122]
-
Kumar, N.
A Computational Study of Metabolism in Sprinting (TECHNICAL NOTE) [Volume 24, Issue 1, 2011, Pages 75-80]
-
Kumar, P
Stability and Robust Performance Analysis of Fractional Order Controller over Conventional Controller Design [Volume 31, Issue 2, 2018, Pages 322-330]
-
Kumar, P.
Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
-
Kumar, R
Experimental Study on Flow Characteristics Around Twin Wind Blades (RESEARCH NOTE) [Volume 31, Issue 5, 2018, Pages 820-825]
-
Kumar, R.
Turbofan Engine Performance under Reliability Measures Approach [Volume 30, Issue 4, 2017, Pages 610-619]
-
Kumar, R.
Viscosity Analysis of Water-based Copper Oxide Nanofluids [Volume 36, Issue 3, 2023, Pages 481-489]
-
Kumar, R.
A Fault Tolerant Operation of 3-Phase, 5-Level CHBMLI under Open Circuit Fault Conditions [Volume 36, Issue 10, 2023, Pages 1733-1745]
-
Kumar, R.
Performance and Economic Analysis of the Utilization of Construction and Demolition Waste as Recycled Concrete Aggregates [Volume 37, Issue 3, 2024, Pages 460-467]
-
Kumar, Ratnesh
Direct Displacement Based Design of Reinforced Concrete Elevated Water Tanks Frame Staging [Volume 32, Issue 10, 2019, Pages 1395-1406]
-
Kumar, S
Load Balancing Approaches for Web Servers: A Survey of Recent Trends [Volume 31, Issue 2, 2018, Pages 263-269]
-
Kumar, S.
A Random Forest Classifier based on Genetic Algorithm for Cardiovascular Diseases Diagnosis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1723-1729]
-
Kumar, S.
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys [Volume 33, Issue 5, 2020, Pages 861-869]
-
Kumar, Sanjeet
Oscillatory MHD Flow of Blood through an Artery with Mild Stenosis (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 125-130]
-
Kumar, Sanjeev
A Computational Study of Oxygen Transport in the Body of Living Organism (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 39-44]
-
Kumar, Sanjeev
A Computational Study of Oxygen Transport in the Body of Living Organism [Volume 18, Issue 4, 2005, Pages 351-358]
-
Kumar, Sanjeev
Oscillatory MHD Flow of Blood through an Artery with Mild Stenosis (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 125-130]
-
Kumar, Sunil
Global Stability for Thermal Convection in a Couple Stress Fluid Saturating a Porous Medium with Temperature-Pressure Dependent Viscosity: Galerkin Method [Volume 25, Issue 3, 2012, Pages 221-230]
-
Kumar, Susheel
Bi-Level Control Policy for Redundant Repairable Multicomponent System with Reneging, Set Up and Vacation [Volume 22, Issue 2, 2009, Pages 159-168]
-
Kumar, Vinod
Region Completion in a Texture using Multiresolution Transforms [Volume 27, Issue 5, 2014, Pages 747-756]
-
Kumar, Vivek
Thermal Convection in a (Kuvshiniski-type) Viscoelastic Rotating Fluid in the Presence of Magnetic Field through Porous Medium (TECHNICAL NOTE) [Volume 26, Issue 7, 2013, Pages 753-760]
-
KUMAR, N.SENTHIL
Implementation of Floating Output Interleaved Input DC-DC Boost Converter [Volume 28, Issue 9, 2015, Pages 1286-1294]
-
KUMAR, N V ACHUTH
Analysis on Components Complexity During Execution of Construction Projects [Volume 29, Issue 9, 2016, Pages 1227-1234]
-
Kumar Chaudhary, S
Stability and Robust Performance Analysis of Fractional Order Controller over Conventional Controller Design [Volume 31, Issue 2, 2018, Pages 322-330]
-
Kumar C. L., M.
Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
-
Kumar C. L., M.
Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
-
Kumar Ghosh, S
Evaluation of Biogas as an Alternative Driving Force of Electrically Operated Vehicles: A Case Study [Volume 31, Issue 5, 2018, Pages 834-840]
-
Kumari, A.
Human Disease Prediction using Machine Learning Techniques and Real-life Parameters [Volume 36, Issue 6, 2023, Pages 1092-1098]
-
Kumar Kusumanchi, T. P. S.
Design and Optimization of High-gain Series and Parallel-fed Array Antennas for Enhanced Gain and Front-to-back Ratio in X-Band Applications [Volume 37, Issue 3, 2024, Pages 546-555]
-
Kumar Mandal, N.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Kumar Roy, A.
Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
-
Kumar Roy, B.
Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations [Volume 35, Issue 11, 2022, Pages 2176-2185]
-
Kumar Sharma, V.
Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage [Volume 31, Issue 6, 2018, Pages 980-985]
-
Kumar Shukla, D.
Structure-property Interaction in Flux Assisted Tungsten Inert Gas Welding of Austenitic Stainless Steel [Volume 32, Issue 1, 2019, Pages 99-105]
-
Kumar Singh, R.
Mathematical Investigation of Soil Temperature Variation for Geothermal Applications [Volume 30, Issue 10, 2017, Pages 1609-1614]
-
Kumar Tyagi, R
Estimate the Performance of Catalytic Converter Using Turbulence Induce Devices [Volume 31, Issue 5, 2018, Pages 856-862]
-
Kumbhar, Onkar G.
Direct Displacement Based Design of Reinforced Concrete Elevated Water Tanks Frame Staging [Volume 32, Issue 10, 2019, Pages 1395-1406]
-
Kumbhar, V.
Grape (Vitis Vinifera) Leaf Disease Detection and Classification Using Deep Learning Techniques: A Study on Real-Time Grape Leaf Image Dataset in India [Volume 37, Issue 8, 2024, Pages 1522-1533]
-
Kumoro, A. C.
Partial Enzymatic Hydrolysis of Glucomannan and Its Mathematical Model [Volume 36, Issue 12, 2023, Pages 2214-2221]
-
Kumoro, A. C.
Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
-
Kuna, D.
Assessing Potential Performance of GPS and Galileo in Context of Broadcast Precise Orbits and Clock Corrections [Volume 36, Issue 3, 2023, Pages 465-472]
-
Kunkritthanachai, P.
Design of a Circular Patch Antenna with Parasitic Elements for 5G Applications [Volume 36, Issue 9, 2023, Pages 1686-1694]
-
Kunshin, A.
Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor [Volume 33, Issue 7, 2020, Pages 1423-1430]
-
Kunshin, A.
Augmented Reality System and Maintenance of Oil Pumps [Volume 33, Issue 8, 2020, Pages 1620-1628]
-
Kurahatti, Narayan G
Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 127-133]
-
Kurnia, H.
Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
-
Kurniawan, B.
Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
-
Kurniawan Mainil, A
Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
-
Kusmono, K.
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Kusmono, K.
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Kusmono, K.
Synthesis of Silica Nanoparticles from Silica Sand via Vibration Assisted Alkaline Solution Method [Volume 35, Issue 7, 2022, Pages 1300-1306]
-
Kusumaatmaja, A.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Kusumastuti, R.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Kusumawati, D. H.
Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
-
Kusumawati, Diah Hari
Synthesis of Fe3O4/SiO2/PEG Nanocomposite from Minerals Sands: Kinetic Adsorption Heavy Metal Ion from Aqueous Solution [(Articles in Press)]
-
Kusumawati, R. P.
Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
-
Kuzmin, K. A.
Integral Assessment of Influence Mechanism of Heavy Particle Generator on Hydrocarbon Composition of Vehicles Motor Fuel [Volume 37, Issue 8, 2024, Pages 1700-1706]
L
-
Labibi, H.
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Labutov, Dmitry
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Laderian, A.
Prediction of Temperature Profile in Oil Wells [Volume 13, Issue 1, 2000, Pages 77-88]
-
Ladika, Ladika
Strengthening the Standardisation of Professional Engineering Competencies to Support Sustainable Construction Through Circular Economy Principles in Indonesia [(Articles in Press)]
-
Laftah Abbas, Jinan
Structural Behavior of Axially Loaded Composite Concrete-steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1548-1558]
-
Lahderanta, E.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
LAHIJANI, POOYA
Catalytic Effect of Metal Species on Enhancement of CO2 Gasification Reactivity of Biomass Char [Volume 28, Issue 9, 2015, Pages 1251-1256]
-
Lahlou, K.
A New Model of Equivalent Modulus Derived from Repeated Load CBR Test [Volume 33, Issue 7, 2020, Pages 1321-1330]
-
Lahroodi, M.
Modeling and Control of Gas Turbine Combustor with Dynamic and Adaptive Neural Networks (TECHNICAL NOTE) [Volume 21, Issue 1, 2008, Pages 71-84]
-
Lai, L.
Bionic Perception Method of Navel Orange Plucking Position Based on Fmincon and PD Angle Control [Volume 35, Issue 11, 2022, Pages 2265-2274]
-
Lai, S. O
Improving Hydrophilicity of Polyethersulfone Membrane Using Silver Nanoparticles for Humic Substances Removal [Volume 31, Issue 8, 2018, Pages 1364-1372]
-
Lajevardi, Masoumeh
Designing a Model for Optimizing the Operation of Production Processes in Industry 4.0 [(Articles in Press)]
-
Lajevardi, S. H.
Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
-
Lakouraj, Moslem M.
Recycling and Reuse of Organo-sulfur Compounds from Barrels of Natural Gas Contaminated with Mercaptan Odorant [Volume 32, Issue 11, 2019, Pages 1527-1533]
-
Lakshmi Kala, K.
Mathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 997-1003]
-
Lakshumu Naidu, A
Experimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite [Volume 31, Issue 4, 2018, Pages 659-665]
-
Laksmono, Joddy Aryo
Optimization of In-Situ Synthesis Process Parameters of LiFePO4/C-MAF-5 Surface Modification for Conductivity Improvement of LIB Cathode Material by Response Surface Method [(Articles in Press)]
-
Lamba, A.
Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
-
Lamdouar, N.
A Method of Strip Footings Design for Light Structures on Expansive Clays [Volume 35, Issue 1, 2022, Pages 248-257]
-
Lamultree, S.
Design of a Circular Patch Antenna with Parasitic Elements for 5G Applications [Volume 36, Issue 9, 2023, Pages 1686-1694]
-
Langrish, T. A. G.
Comaprison of Mass-Transfer Efficiencies of Scc and Structured Packing [Volume 14, Issue 1, 2001, Pages 1-8]
-
Lani, N. S
Synthesis and Characterization of CaO-TiO2 for Transesterification of Vegetable Palm Oil [Volume 31, Issue 8, 2018, Pages 1326-1333]
-
Lap-Arparat, P.
Computational Study of Excitation Controlling Parameters Effect on Uniform Beam Deformation under Vibration [Volume 36, Issue 1, 2023, Pages 60-70]
-
Lap-Arparat, P.
Development of Temperature-strain Prediction Based on Deformation-induced Heating Mechanism in SCM440 Surface Cracked Shaft under Ultrasonic Excitation [Volume 37, Issue 1, 2024, Pages 151-166]
-
Lapian, F. E. P.
Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
-
Lapthorn, A.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Larijani, M. M.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Laroussi, K.
Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
-
Lashgari, V. A.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Lashgarian Azad, N.
A New Framework for Advancement of Power Management Strategies in Hybrid Electric Vehicles [Volume 33, Issue 3, 2020, Pages 468-476]
-
Lashkenari, M. S.
Adaptive Neuro-fuzzy Inference System Prediction of Zn Metal Ions Adsorption by γ-Fe2o3/Polyrhodanine Nanocomposite in a Fixed Bed Column [Volume 31, Issue 10, 2018, Pages 1617-1623]
-
Latief, Y.
Development of Work Breakdown Structure for Stadium Work as Project Guideline and Standard [Volume 35, Issue 7, 2022, Pages 1291-1299]
-
Latief, Y.
Measuring and Benchmarking the Quality Culture Maturity of Construction Companies in Indonesia [Volume 35, Issue 10, 2022, Pages 2027-2039]
-
Latief, Y.
Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
-
Latif, Alimohammad
Dimensionality Reduction and Improving the Performance of Automatic Modulation Classification using Genetic Programming (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 709-714]
-
Latifi, M.
a Comparative Theoretical Analysis for a Knitted Loop Model [Volume 12, Issue 1, 1999, Pages 39-44]
-
Latifi, M.
Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
-
Latifian, A. H.
New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
-
Latifian, M.
A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
-
Latifi Rostami, S.A.
Buckling Analysis of Composite Lattice Cylindrical Shells with Ribs Defects [Volume 26, Issue 4, 2013, Pages 411-420]
-
Latif Shabgahi, Gh.
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Lau, W. J
Adsorptive Removal of Cr(VI) and Cu(II) Ions from Water Solution using Graphene Oxide-Manganese Ferrite (GMF) Nanomaterials [Volume 31, Issue 8, 2018, Pages 1341-1346]
-
Lau, W. J
Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
-
Lau, W. J
Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation [Volume 31, Issue 8, 2018, Pages 1446-1454]
-
Lau, W. J
Zwitterion Embedded Thin Film Composite Membrane for Oily Wastewater Treatment [Volume 31, Issue 8, 2018, Pages 1464-1472]
-
Lavanya, V.
Seamless Transition in Grid-connected Microgrid System using Proportional Resonant Controller [Volume 33, Issue 10, 2020, Pages 1951-1958]
-
Lavasani, A.M.
Flow Visualization Around a Non - Circular Tube [Volume 19, Issue 1, 2006, Pages 73-82]
-
Lavrenko, Sergey
The evaluation of complicated mining exploitation conditions influence on service life of open pit trucks suspensions with remote monitoring systems [(Articles in Press)]
-
Lawrynowicz, Z.
Mechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel [Volume 12, Issue 2, 1999, Pages 83-92]
-
Le, B. T.
Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
-
Le, B. V.
In-situ Fine Basalt Soil Reinforced by Cement Combined with Additive DZ33 to Construct Rural Roads in Gia Lai Province, Vietnam [Volume 33, Issue 11, 2020, Pages 2137-2145]
-
Le, Khanh Ba
Distributions of stress and strain in concrete filled steel tube beams [(Articles in Press)]
-
Le, T. H.
A Comparative Analysis of Axial and Radial Forces in Windings of Amorphous Core Transformers [Volume 37, Issue 1, 2024, Pages 201-212]
-
Le, Vu Thanh
Distributions of stress and strain in concrete filled steel tube beams [(Articles in Press)]
-
Lebrun, J.L.
Surface Hardness Measurment and Microstructural Characterisation of Steel by X-Ray Diffraction Profile Analysis [Volume 8, Issue 3, 1995, Pages 159-168]
-
Lee, H. K.
Amorphous Silicon Flat Panel Imagers for Medical Application [Volume 12, Issue 1, 1999, Pages 29-38]
-
Lee, J. H. S.
Numerical Study of Blast Initiation of Detonation Using a Two Step Chemical Kinetics Model [Volume 15, Issue 3, 2002, Pages 213-222]
-
Lee, W. J
Zwitterion Embedded Thin Film Composite Membrane for Oily Wastewater Treatment [Volume 31, Issue 8, 2018, Pages 1464-1472]
-
Lee, W. J.
Removal of Coliform, Suspended Solids, UV254 and Colour Using Zeolite and Activated Carbon in Riverbank Filtration System [Volume 33, Issue 5, 2020, Pages 732-736]
-
Lei, Y.
Simulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods [Volume 32, Issue 7, 2019, Pages 1023-1030]
-
Lekomtsev, A
Performance Evaluation of Oily Waste Treatment Ways (TECHNICAL NOTE) [Volume 31, Issue 3, 2018, Pages 511-515]
-
Lekomtsev, A.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Leong, K. Y.
Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes [Volume 36, Issue 11, 2023, Pages 2004-2014]
-
Lesani, H.
Distribution Systems Reconfiguration Using Pattern Recognizer Neural Networks [Volume 15, Issue 2, 2002, Pages 135-144]
-
Lesani, H.
Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
-
Leusheva, E
Investigation of the Fractional Composition Effect of the Carbonate Weighting Agents on the Rheology of the Clayless Drilling Mud [Volume 31, Issue 7, 2018, Pages 1152-1158]
-
Leusheva, E.
Development of Drilling Mud Solution for Drilling in Hard Rocks (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 620-626]
-
Leusheva, E.
Influence of the Solid Phase's Fractional Composition on the Filtration Characteristics of the Drilling Mud [Volume 32, Issue 5, 2019, Pages 794-798]
-
Leusheva, E.
Effect of Carbonate Additives on Dynamic Filtration Index of Drilling Mud [Volume 33, Issue 5, 2020, Pages 934-939]
-
Leusheva, Ekaterina
Energy Delivery at Oil and Gas Wells Construction in Regions With Harsh Climate [Volume 29, Issue 2, 2016, Pages 274-279]
-
Leusheva, E. L
Improvement of Cement Properties Using a Single Multi-functional Polymer [Volume 31, Issue 1, 2018, Pages 181-187]
-
Leusheva, E. L.
Evaluation of Possible Application of Powder Made from Fallen Tree Leaves as a Drilling Mud Additive [Volume 37, Issue 8, 2024, Pages 1592-1599]
-
Li, Bin
Modelling and Numerical Simulation of Cutting Stress in End Milling of Titanium Alloy using Carbide Coated Tool [Volume 28, Issue 7, 2015, Pages 1090-1098]
-
Li, Bo
Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
-
Li, Bo
Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application [Volume 28, Issue 11, 2015, Pages 1656-1662]
-
Li, Bo
Research of Intake Valve Deactivation on Engine Performance [Volume 29, Issue 4, 2016, Pages 473-481]
-
Li, C.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Li, J.
Design and Parameters Optimization of Pteris vittata Automatic Sowing Machine for Phytoremediation [Volume 33, Issue 4, 2020, Pages 694-701]
-
Li, J.
Characteristics of Shale Gas Reservoir in Jiyang Depression and its Significance in Drilling and Exploitation [Volume 33, Issue 8, 2020, Pages 1677-1686]
-
Li, Kangshun
Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
-
Li, Q.
Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
-
Li, Q.
Effects of Drilling Mud Properties on Hydrate Dissociation Around Wellbore during Drilling Operation in Hydrate Reservoir [Volume 35, Issue 1, 2022, Pages 142-149]
-
Li, Ronglin
A Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets [Volume 29, Issue 8, 2016, Pages 1087-1093]
-
Li, S. C.
Heat Transfer Performance Analysis and Optimization of Exhaust Gas Recirculation Cooler with Different Structural Characteristics [Volume 33, Issue 10, 2020, Pages 2105-2112]
-
Li, Tianfeng
Robot path optimization and Application in BS storage system considering Image processing Technology [(Articles in Press)]
-
Li, X.
Analytical Investigation of Tire-Road Contact Characteristics for Wheelchair Robots Safely Running [Volume 31, Issue 10, 2018, Pages 1767-1772]
-
Li, X.
Study on the Contrast between Two Seismic Response Analysis Programs of Soil Layer [Volume 32, Issue 1, 2019, Pages 46-53]
-
Li, X.
Rolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm [Volume 32, Issue 1, 2019, Pages 121-126]
-
Li, Xinping
Microscopic Structures Analysis and Experimental Research of Beak [Volume 29, Issue 7, 2016, Pages 940-945]
-
Li, X. Li
Analytical Matching of Optimal Damping Characteristics Curve for Vehicle Passive Suspensions [Volume 31, Issue 12, 2018, Pages 2109-2114]
-
Li, Y.
Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
-
Li, Ya-fei
Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
-
Li, Z.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
LI, Shangpin
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE) [Volume 26, Issue 9, 2013, Pages 975-984]
-
LI, Siqi
Empirical Seismic Vulnerability and Damage of Bottom Frame Seismic Wall Masonry Structure: A Case Study in Dujiangyan (China) Region [Volume 32, Issue 9, 2019, Pages 1260-1268]
-
Liaghat, G.
Analysis of the Mechanics of Preforation by Projectiles [Volume 4, Issue 3, 1991, Pages 127-140]
-
Liaghat, G.
Comparision of Perforation Theories and Some Experimental Results [Volume 5, Issue 3, 1992, Pages 119-128]
-
Liaghat, G.
Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
-
Liang, D. Y.
Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
-
Liang, Qiaokang
Flexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot [Volume 24, Issue 4, 2011, Pages 377-386]
-
Ligotsky, D. N.
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Ligotsky, D. N.
Investigations on Material Composition of Iron-containing Tails of Enrichment of Combined Mining and Processing in Kursk Magnetic Anomaly of Russia [Volume 33, Issue 7, 2020, Pages 1431-1439]
-
Lijuan, P.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
-
Likhith, PVN
Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading [Volume 31, Issue 1, 2018, Pages 104-109]
-
Lin, Lin
Comparative Analysis of Image Denoising Methods Based on Wavelet Transform and Threshold Functions [Volume 30, Issue 2, 2017, Pages 199-206]
-
Lin, W.
Comparison of Two Computational Microstructure Models for Predicting Effective Transverse Elastic Properties of Unidirectional Fiber Reinforced Composites [Volume 31, Issue 9, 2018, Pages 1498-1504]
-
Lindquist, Robert
The Effects of Excitation Signal on the Resolution of the Liquid Crystal Capacitive Chemical and Biological Sensors [Volume 26, Issue 11, 2013, Pages 1275-1280]
-
Linh, N. K.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Lintvinenko, V. P.
Digital Binary Phase-shift Keyed Signal Detector [Volume 32, Issue 4, 2019, Pages 510-518]
-
Lintvinenko, V. P.
Digital Root-mean-square Signal Meter [Volume 33, Issue 11, 2020, Pages 2201-2208]
-
Liouane, Noureddine
Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
-
Lisin, V.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Liu, C.
Heat Transfer Performance Analysis and Optimization of Exhaust Gas Recirculation Cooler with Different Structural Characteristics [Volume 33, Issue 10, 2020, Pages 2105-2112]
-
Liu, C. H.
Heat Transfer Performance Analysis and Optimization of Exhaust Gas Recirculation Cooler with Different Structural Characteristics [Volume 33, Issue 10, 2020, Pages 2105-2112]
-
Liu, H.
Lattice Boltzmann Method Application on Headwater at Lata Kinjang Waterfall, Malaysia [Volume 33, Issue 5, 2020, Pages 760-769]
-
Liu, K.
Bionic Perception Method of Navel Orange Plucking Position Based on Fmincon and PD Angle Control [Volume 35, Issue 11, 2022, Pages 2265-2274]
-
Liu, K. A.
Numerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection [Volume 33, Issue 7, 2020, Pages 1403-1412]
-
Liu, Q.
An Incentive Mechanism for Energy Internet of Things Based on Blockchain and Stackelberg Game [Volume 36, Issue 8, 2023, Pages 1468-1477]
-
Liu, X.
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
-
Liu, X.
Characteristics of Shale Gas Reservoir in Jiyang Depression and its Significance in Drilling and Exploitation [Volume 33, Issue 8, 2020, Pages 1677-1686]
-
Liu, Y
Modeling and Simulation of Variable Frequency Pump Control Fatigue Test Machine [Volume 29, Issue 1, 2016, Pages 96-102]
-
Liu, Y. W.
Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
-
Liu, Z.
Simulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods [Volume 32, Issue 7, 2019, Pages 1023-1030]
-
Lixiong, X.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Lizunova, Anna
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Lo, C.
Mössbauer and Magnetic Studies of Iron-Zeolite and Iron-Cobalt Zeolite Catalysts Used in Synthesis Gas Conversion [Volume 20, Issue 3, 2007, Pages 263-274]
-
Lobachev, Ilya
Evaluation of strength properties of cement containing NaCl in mixing water for cementing wells in halite strata [(Articles in Press)]
-
Loginov, Arseniq
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Loginov, E. V.
Investigations on Material Composition of Iron-containing Tails of Enrichment of Combined Mining and Processing in Kursk Magnetic Anomaly of Russia [Volume 33, Issue 7, 2020, Pages 1431-1439]
-
Lokeshwar Reddy, C.
Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques [Volume 30, Issue 11, 2017, Pages 1762-1770]
-
Long, Yuhong
An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
-
Looi, C. C.
Bioconversion and Enzymatic Activities of Neurospora Sitophila Grown Under Solid State and Submerged Fermentation on Sago Hamps (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 65-68]
-
Loseva, A. V.
Standards for Selection of Surfactant Compositions used in Completion and Stimulation Fluids [Volume 36, Issue 9, 2023, Pages 1605-1610]
-
Loseva, A. V.
Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
-
Lotfazar,, A.
Integrator Backstepping Control of a 5 DoF Robot Manipulator with Cascaded Dynamics [Volume 16, Issue 4, 2003, Pages 373-383]
-
Lotfi, M. M.
Integrated Inspection Planning and Preventive Maintenance for a Markov Deteriorating System Under Scenario-based Demand Uncertainty [Volume 33, Issue 4, 2020, Pages 607-620]
-
Lotfi, M. M.
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Lotfi, Mohammad Mehdi
Short-term Price-based Unit Commitment of Hydrothermal GenCos: A Pre-emptive Goal Programming Approach [Volume 26, Issue 9, 2013, Pages 1017-1030]
-
Lotfi, Mohammad Mehdi
Minimizing Makespan with Start Time Dependent Jobs in a Two Machine Flow Shop [Volume 29, Issue 6, 2016, Pages 778-787]
-
Lotfi, S.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Lotfi, V.
Application of Discrete Crack in Nonlinear Dynamic Analysis of Shahid Rajaee Arch Dam [Volume 14, Issue 1, 2001, Pages 9-24]
-
Lotfollahi, Mohammad Nader
A Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature [Volume 27, Issue 10, 2014, Pages 1519-1526]
-
Lotfollahi -Yaghin, M.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Lotfollahi -Yaghin, M. A.
Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
-
Lotfollahi Yaghin, M. A.
Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]
-
Lotfollahi-Yaghin, M. A.
The Comparison of Punching Shear Capacity in Solid and Void Two-Way Slabs on Soil Substrate in Relation to Spring Stiffness Changes [Volume 33, Issue 10, 2020, Pages 1872-1885]
-
Lotfollahi-Yaghin, M. A.
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Lotfollahi-Yaghin, M.A.
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Lotfollahi-Yaghin, Mohammad Ali
Performance Evaluation of Curved-TADAS Damper on Seismic Response of Moment Resisting Steel Frame [Volume 33, Issue 1, 2020, Pages 55-67]
-
Lou, J.
Design and Parameters Optimization of Pteris vittata Automatic Sowing Machine for Phytoremediation [Volume 33, Issue 4, 2020, Pages 694-701]
-
Low, H. C.
Fitting Second-order Models to Mixed Two-level and Four-level Factorial Designs: Is There an Easier Procedure? [Volume 28, Issue 11, 2015, Pages 1644-1650]
-
Low, Shye-Nee
House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study [Volume 27, Issue 8, 2014, Pages 1195-1204]
-
Low, S. K
Comparative Studies on Ultrasound Pre-treated Peanut Husk Powder and Ultrasound Simultaneous Process on Heavy Metal Adsorption [Volume 31, Issue 8, 2018, Pages 1334-1340]
-
Lu, J. H.
Signal Prediction by Layered Feed - Forward Neural Network (RESEARCH NOTE). [Volume 5, Issue 1, 1992, Pages 69-74]
-
Lubis, S.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Luc, I. E.
New Approach of Deployment of the Multi-static Radars Based on an Aperture Angle and the Probability of False Alarm [Volume 36, Issue 9, 2023, Pages 1589-1596]
-
Lucas, C.
Planning Robot Motion in a 2-D Region with Unknown Obstacles [Volume 2, Issue 3, 1989, Pages 112-117]
-
Lucas, C.
Further Observations on Blocking Zeros in Linear Muitivariabie systems (RESEARCH NOTE). [Volume 4, Issue 1, 1991, Pages 72-75]
-
Lucas, C.
A Fuzzy Expert System for Predicting the Performance of Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 229-238]
-
Lucas, C.
Distribution Systems Reconfiguration Using Pattern Recognizer Neural Networks [Volume 15, Issue 2, 2002, Pages 135-144]
-
Lucas, C.
Control of Multivariable Systems Based on Emotional Temporal Difference Learning Controller [Volume 17, Issue 4, 2004, Pages 363-376]
-
Lucas, C.
Model Based Method for Determining the Minimum Embedding Dimension from Solar Activity Chaotic Time Series [Volume 21, Issue 1, 2008, Pages 31-44]
-
Lunagaria, Mepalal
Numerical investigation of FRP retrofitted short RC circular columns under concentric compressive load [(Articles in Press)]
-
Lutfiana, S. R.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Ly, N. T.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Ly, N. T.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Lyba, V.
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Lydia, R.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Lykov, Y. V.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Lykov, Y. V.
Investigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 790-793]
M
-
M, Bhavana
Design and Simulation of Silicon Germanium Based Full Gate Tunnel FET [(Articles in Press)]
-
M, HENA
RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
-
M, ranjani
A Robust STATCOM Controller using Particle Swarm Optimization [Volume 27, Issue 5, 2014, Pages 731-738]
-
M, SenthilKumar
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
-
M, Venkatesan
Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
-
Ma, Fanglan
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE) [Volume 26, Issue 9, 2013, Pages 975-984]
-
Ma, J.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Ma, Liquan
An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
-
Ma, Yidong
Microscopic Structures Analysis and Experimental Research of Beak [Volume 29, Issue 7, 2016, Pages 940-945]
-
M A, Saleem durai
RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
-
Maatki, Chemseddine
Entropy Generation of Double Diffusive Natural Convection in a Three Dimensional Differentially Heated Enclosure [Volume 27, Issue 2, 2014, Pages 215-226]
-
Maaza, M.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Mabrouk, O. M.
Optimization of Ultrasonic-assisted Friction Stir Welded using Taguchi Approach [Volume 35, Issue 1, 2022, Pages 213-219]
-
Mabrouk, O. M.
Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
-
Madadi, M.
A Fuzzy Multi Objective Programming Model for Power Generation and Transmission Expansion Planning Problem [Volume 23, Issue 1, 2010, Pages 29-39]
-
Madani, Sana Sadat
Analysis of a Framework for E-Commerce Consumer Behavior before and During Covid-19 [(Articles in Press)]
-
Madar Valli, P
Pongamia pinnata Plant Seed Oil as Dielectric Fluid for Electro Discharge Machining Process [Volume 32, Issue 12, 2019, Pages 1805-1812]
-
Madhava Selvan, V.
Mathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 997-1003]
-
Madhkhan, M.
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Madhoushi, M.
A Hybrid Fuzzy Multi-criteria Decision Making Model Based on Fuzzy DEMATEL with Fuzzy Analytical Network Process and Interpretative Structural Model for Prioritizing LARG Supply Chain Practices [Volume 32, Issue 3, 2019, Pages 413-423]
-
Madhu Krishna, K.
Improving the Position Accuracy of Rover Receiver using Differential Positioning in Indian Regional Navigation Satellite System [Volume 36, Issue 3, 2023, Pages 497-504]
-
Madi, Y.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Madinei, Hadi
Effect of Length-scale Parameter on Pull-in Voltage and Natural Frequency of a Micro-plate [Volume 27, Issue 3, 2014, Pages 375-384]
-
Madinei, Hadi
Static Pull-in Analysis of Capacitive FGM Nanocantilevers Subjected to Thermal Moment using Eringen’s Nonlocal Elasticity [Volume 27, Issue 4, 2014, Pages 633-642]
-
Madinei, Hadi
State Estimation of MEMs Capacitor Using Taylor Expansion [Volume 28, Issue 5, 2015, Pages 764-770]
-
Madival, Abhishek Sadananda
Physico-Mechanical Characterization of Recycled Waste Tire Rubber and Rice Straw Reinforced Composite [(Articles in Press)]
-
Madoliat, R.
Steady Flow Analysis and Modeling of the Gas Distribution Network Using the Electrical Analogy (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1269-1276]
-
Mafi-Nezhad, K.
Nonlinear Analysis of a Power Amplifier inc C Band and Load Pull Technique Calculation USING VOLTERRA SERIES [Volume 17, Issue 2, 2004, Pages 131-134]
-
Mafi-Nezhad, K.
Optimization of Array Factor in Linear Arrays Using Modified Genetic Algorithm [Volume 17, Issue 4, 2004, Pages 367-380]
-
Maghami, Seyed Ali
Effect of Corner Bluntness on Energy Absorbing Capability of Non-circular Metallic Tubes Subjected to Axial Impact [Volume 26, Issue 8, 2013, Pages 875-884]
-
Maghfiroh, H.
Enhancing Low-Pass Filter Energy Management with Adaptive State of Charge Limiter for Hybrid Energy Storage in Electric Vehicles [Volume 37, Issue 8, 2024, Pages 1486-1499]
-
Maghrebi, M. F.
Experimental Investigation of Porosity, Installation Angle, Thickness and Second Layer of Permeable Obstacles on Density Current [Volume 33, Issue 9, 2020, Pages 1710-1720]
-
Maghsoodi, V.
Biological Pretreatment of a Beverage Waste Using Yeast Isolated from the Factory Sludge (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 223-226]
-
Maghsoodi, V.
Treatment of Wastewater Containing Carbohydrates using Pichia Saitoi Culture [Volume 17, Issue 3, 2004, Pages 209-218]
-
Maghsoodi, V.
Solid State Fermentation for Production of Chitosan by Aspergillus Niger [Volume 22, Issue 1, 2009, Pages 1-6]
-
Maghsoudi, A.
An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
-
Maghsoudi, A. A.
Stress-Strain Field and Theoretical Analysis of RC Bridge [Volume 22, Issue 1, 2009, Pages 7-22]
-
Maghsoudi, A. A.
Flexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets [Volume 22, Issue 2, 2009, Pages 131-146]
-
Maghsoudi, A. A.
Application of Nanotechnology in Self-Compacting Concrete Design [Volume 22, Issue 3, 2009, Pages 229-244]
-
Maghsoudi, H.
Design of an Intelligent Controller for Station Keeping, Attitude Control, and Path Tracking of a Quadrotor Using Recursive Neural Networks [Volume 32, Issue 5, 2019, Pages 747-758]
-
Maghsoudipour, A.
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Maghsoudipour, Amir
PHASE STABILITY AND CONDUCTIVITY OF δ-Bi2O3 WITH MIXTURE OF YTTRIUM AND YTTERBIUM OXIDES [Volume 25, Issue 2, 2012, Pages 159-164]
-
Maghzi, P.
Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
-
Mahajan, V.
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Mahale, A.
Cross-modal Deep Learning-based Clinical Recommendation System for Radiology Report Generation from Chest X-rays [Volume 36, Issue 8, 2023, Pages 1569-1577]
-
Mahani, Mohammad
Adsorptive Behavior of an Amberlite Anion Exchanger Resin for Uranium (VI) Sorption in the Presence of Sulfate Anions [Volume 29, Issue 2, 2016, Pages 170-175]
-
Mahani, Mohammad
Uranium Ions Removal Using Amberlite CG-400 Anion Exchanger Resin in the Presence of Sulfate Anions [Volume 29, Issue 6, 2016, Pages 728-734]
-
Maharana, Laxmana
Look up Table Based Low Power Analog Circuit Testing [Volume 29, Issue 9, 2016, Pages 1247-1256]
-
Maharsih, Inggit Kresna
Mesoporous WO3/TiO2 Nanocomposites Photocatalyst for Rapid Degradation of Methylene Blue in Aqueous Medium [Volume 32, Issue 10, 2019, Pages 1345-1352]
-
Mahboob, M.
A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
-
Mahboobi, S. H.
Trajectory Tracking of a Mobile Robot Using Fuzzy Logic Tuned by Genetic Algorithm (TECHNICAL NOTE) [Volume 19, Issue 1, 2006, Pages 95-104]
-
Mahdavi, A.
Numerical Study of Blast Initiation of Detonation Using a Two Step Chemical Kinetics Model [Volume 15, Issue 3, 2002, Pages 213-222]
-
Mahdavi, A.
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Mahdavi, Arash
A passive approach to cooling photovoltaic devices by utilizing pin fins [(Articles in Press)]
-
Mahdavi, Iraj
An Interactive Allocation for Depot-Customer-Depot in a Multi Aspect Supply Chain Network [Volume 24, Issue 4, 2011, Pages 367-376]
-
Mahdavi, Iraj
OPTIMIZATION OF TREE-STRUCTURED GAS DISTRIBUTION NETWORK USING ANT COLONY OPTIMIZATION: A CASE STUDY [Volume 25, Issue 2, 2012, Pages 141-158]
-
Mahdavi, Iraj
A Nonlinear Model for a Capacitated Location-allocation Problem with Bernoulli Demand using Sub-sources [Volume 26, Issue 9, 2013, Pages 1007-1016]
-
Mahdavi, Iraj
A Novel Interactive Possibilistic Mixed Integer Nonlinear Model for Cellular Manufacturing Problem under Uncertainty [Volume 30, Issue 3, 2017, Pages 384-392]
-
Mahdavi, K.
Flexible Job Shop Scheduling Problem Considering Upper Bounds for the Amount of Interruptions Between Operations and Machines Maintenance Activities [Volume 37, Issue 8, 2024, Pages 1600-1614]
-
Mahdavi, M.
A Novel Method for Tracking Moving Objects using Block-Based Similarity [Volume 22, Issue 1, 2009, Pages 35-42]
-
Mahdavi, M.
Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
-
Mahdavi, Mehrdad
Artificial Neural Network Based Prediction Hardness of Al2024-Multiwall Carbon Nanotube Composite Prepared by Mechanical Alloying [Volume 29, Issue 12, 2016, Pages 1726-1733]
-
Mahdavi Amiri, N.
OPTIMIZATION OF TREE-STRUCTURED GAS DISTRIBUTION NETWORK USING ANT COLONY OPTIMIZATION: A CASE STUDY [Volume 25, Issue 2, 2012, Pages 141-158]
-
Mahdavi Jafari, M.
Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm [Volume 30, Issue 12, 2017, Pages 1885-1893]
-
Mahdavi Mazdeh, M.
Coordinating Order Acceptance and Batch Delivery for an Integrated Supply Chain Scheduling [Volume 30, Issue 5, 2017, Pages 700-709]
-
Mahdavi Tabatabayee, N.
On Line Electric Power Systems State Estimation Using Kalman Filtering (RESEARCH NOTE) [Volume 8, Issue 4, 1995, Pages 233-235]
-
Mahdi, A. A.
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
-
Mahdi, M.
Numerical Investigation of Nonlinear Oscillations and Compression-Only Behavior of a Coated Microbubble Near an Elastic Wall [Volume 33, Issue 10, 2020, Pages 2095-2104]
-
Mahdian Dehkordi, N.
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Mahdian Toroghi, H.
Foreground Extraction Using Hilbert-Schmidt Independence Criterion and Particle Swarm Optimization Independent Component Analysis [Volume 33, Issue 5, 2020, Pages 1020-1026]
-
Mahdipoor, Mohammad Sadegh
Comparative Study of Plasma Sprayed Yittria and Ceria Stabilized Zirconia Properties [Volume 26, Issue 1, 2013, Pages 13-18]
-
Mahdiyar, O.
A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
-
Mahesh Kumar, C. L.
Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
-
Maheshwari, Sandhya
Reliability Analysis of Redundant Repairable System with Degraded Failure [Volume 17, Issue 2, 2004, Pages 171-182]
-
Mahini, S.S
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Mahjouri, saeid
Vibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study [Volume 28, Issue 11, 2015, Pages 1687-1692]
-
Mahlooji, H.
Generating Antithetic Random Variates in Simulation of a Replacement Process by Rejection Method [Volume 7, Issue 4, 1994, Pages 207-214]
-
Mahmodi, E.
A Novel Trust Computation Method Based on User Ratings to Improve the Recommendation [Volume 33, Issue 3, 2020, Pages 377-386]
-
Mahmood, M. S.
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Mahmood, M. S.
Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021, Pages 2636-2641]
-
Mahmood, M. H
Developing of Corrosion Resistance Nano Copper Oxide Coating on Copper using Anodization in Oxalate solution [Volume 31, Issue 3, 2018, Pages 450-455]
-
Mahmood, M. R.
Effect of Carbonation on the Collapse Potential of Magnesium Oxide Treated Gypseous Soil [Volume 35, Issue 4, 2022, Pages 706-714]
-
Mahmoodabadi, M. J.
Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO) [Volume 26, Issue 9, 2013, Pages 1089-1102]
-
Mahmoodabadi, M. J.
A New Mechanical Design for Legged Robots to Reduce Energy Consumption [Volume 33, Issue 12, 2020, Pages 2530-2537]
-
Mahmoodabadi, M. J.
Investigation of the Damping Performance of a Shape Memory Alloy Beam [Volume 36, Issue 7, 2023, Pages 1369-1382]
-
Mahmoodabadi, M. J.
A New Optimization Algorithm Based on Particle Swarm Optimization Genetic Algorithm and Sliding Surfaces [Volume 37, Issue 9, 2024, Pages 1716-1735]
-
Mahmoodabadi, Mohammad Javad
Optimal Pareto Parametric Analysis of Two Dimensional Steady-State Heat Conduction Problems by MLPG Method [Volume 22, Issue 4, 2009, Pages 387-406]
-
Mahmoodabadi, Mohammad Javad
Optimization of Meshless Local Petrov-Galerkin Parameters using Genetic Algorithm for 3D Elasto-static Problems (TECHNICAL NOTE) [Volume 24, Issue 2, 2011, Pages 143-153]
-
Mahmoodabadi, Mohammad Javad
Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
-
Mahmoodabadi, Mohammad Javad
A New Technique for Image Zooming Based on the Moving Least Squares [Volume 25, Issue 2, 2012, Pages 105-110]
-
Mahmoodabadi, Mohammad Javad
Meshless Local Petrov-Galerkin Method for Elasto-Static Analysis of Thick-Walled Isotropic Laminated Cylinders [Volume 27, Issue 11, 2014, Pages 1731-1740]
-
Mahmood Ali, S.
A Novel Design and Simulation of a Nano Prosthetic Artificial Heart Valves [Volume 37, Issue 2, 2024, Pages 237-251]
-
Mahmood Ali, Saad
Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology [Volume 32, Issue 11, 2019, Pages 1516-1526]
-
Mahmoodi, A.
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Mahmoodi, M.
Characterization of Nd: Yag Laser Radiation Effects on Ti6Al4V Physico-Chemical Properties: An In Vivo Study [Volume 20, Issue 1, 2007, Pages 1-11]
-
Mahmoodi, M.
Probabilistic Seismic Hazard Assessment of Tehran Based on Arias Intensity [Volume 23, Issue 1, 2010, Pages 1-20]
-
Mahmoodi, M.
Experimental Investigation and Statistical Modeling of the Effective Parameters in Charpy Impact Test on AZ31 Magnesium Alloy with V-shape Groove Using Taguchi Method [Volume 33, Issue 12, 2020, Pages 2521-2529]
-
Mahmoodi, M.
Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
-
Mahmoodian, A.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Mahmood-Soltani, Farzad
A Facility Location Problem with Tchebychev Distance in the Presence of a Probabilistic Line Barrier [Volume 25, Issue 4, 2012, Pages 293-302]
-
Mahmoudi, A.
Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
-
Mahmoudi, A. H.
Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers [Volume 32, Issue 1, 2019, Pages 112-120]
-
Mahmoudi, A. H.
Residual Stresses Measurement in Hollow Samples Using Contour Method [Volume 33, Issue 5, 2020, Pages 885-893]
-
Mahmoudi, A. H.
Effect of Surface Roughness on Brinell Hardness and Load-Displacement Curves using a Macro Indentation [Volume 36, Issue 5, 2023, Pages 914-924]
-
Mahmoudi, A.H.
Fatigue Life of Repaired Welded Tubular Joints [Volume 26, Issue 1, 2013, Pages 25-32]
-
Mahmoudi, A.H.
Plasticity Effect on Residual Stresses Measurement Using Contour Method [Volume 26, Issue 10, 2013, Pages 1203-1212]
-
Mahmoudi, A.H.
Stress Variations Effect on the Accuracy of Slitting Method for Measuring Residual Stresses [Volume 28, Issue 9, 2015, Pages 1368-1374]
-
Mahmoudi, Amirhoushang
A passive approach to cooling photovoltaic devices by utilizing pin fins [(Articles in Press)]
-
Mahmoudi, M.
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Mahmoudi, monire
APPLICATION OF GAME THEORY IN DYNAMIC COMPETITIVE PRICING WITH ONE PRICE LEADER AND N DEPENDENT FOLLOWERS [Volume 25, Issue 1, 2012, Pages 35-44]
-
Mahmoudi, Reza
Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
-
Mahmoudian, A.
Modified Particle Swarm Optimization-Artificial Neural Network and Gene Expression Programing for Predicting High Temperature Oxidation Behavior of Ni–Cr–W-Mo Alloys [Volume 33, Issue 11, 2020, Pages 2327-2338]
-
Mahmoudi-Nasr, P.
Toward Energy-efficient Communication Protocol in WBAN: A Dynamic Scheduling Policy Approach [Volume 35, Issue 1, 2022, Pages 191-200]
-
Mahmoudi-Nasr, P.
Feature Engineering Methods in Intrusion Detection System: A Performance Evaluation [Volume 36, Issue 7, 2023, Pages 1343-1353]
-
Mahmoudkhani, S.
The Transient Dynamics of a Beam Mounted on Spring Supports and Equipped with the Nonlinear Energy Sink [Volume 30, Issue 10, 2017, Pages 1545-1554]
-
Mahmoudzadeh, S.
An Optimized PID for Capsubots using Modified Chaotic Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1377-1384]
-
Mahmoudzadeh Kani, I.
A Collocation Method with Modified Equilibrium on Line Method for Imposition of Neumann and Robin Boundary Conditions in Acoustics (TECHNICAL NOTE) [Volume 23, Issue 1, 2010, Pages 11-22]
-
Mahmud, A. R.
A Newly Developed Laboratory Slab Roller Compactor (Turamesin): An Overview [Volume 21, Issue 2, 2008, Pages 133-142]
-
Mahnama, S.M.
Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm [Volume 25, Issue 3, 2012, Pages 239-248]
-
Mahrouei, M.
Optimization of Control System of Petroleum Refinery Isomerization Unit by Plant-Wide Control Principles [Volume 32, Issue 7, 2019, Pages 901-907]
-
Mahshid, S.
EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
-
Maidin, S.
Effective Blended Learning Model Selection Based on Student Learning Style using Analytic Hierarchy Process for an Undergraduate Engineering Course [Volume 36, Issue 12, 2023, Pages 2232-2242]
-
Majdi, A.
Application of Finite Element Method for Simulation of Rock Mass Caving Processes in Block Caving Method [Volume 36, Issue 1, 2023, Pages 139-151]
-
Majdi, A.
Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
-
Majidi, MAhdi
Energy and Throughput Management in WBAN with Wireless Information and Energy Transfer using Reinforcement Learning [(Articles in Press)]
-
Majidi Shad, M. M.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Majidi Shad, M. M.
3D Finite Element Model for Recycled Asphalt Mixtures with High Percentages of Reclaimed Asphalt Pavement Rutting Simulation [Volume 35, Issue 7, 2022, Pages 1428-1439]
-
Majidzadeh, Maryam
Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1565-1572]
-
Majzoobi, G. H.
Crack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions [Volume 15, Issue 3, 2002, Pages 287-292]
-
Majzoobi, G. H.
Efficiency of Anti-Hourglassing Approaches in Finite Element Method (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 79-88]
-
Majzoobi, G. H.
Numerical and Experimental Study of Ballistic Response of Kevlar Fabric and Kevlar/Epoxy Composite [Volume 30, Issue 5, 2017, Pages 791-799]
-
Majzoobi, G.H.
Fatigue Life of Repaired Welded Tubular Joints [Volume 26, Issue 1, 2013, Pages 25-32]
-
Majzoubi, G. H.
Dynamic and Quasi-Static Tensile Properties of Structural S400 Steel [Volume 13, Issue 1, 2000, Pages 51-60]
-
Majzoubi, G. H.
The Ballistic Behavior of High Strength, Low Alloy-100 Steel at Sub-zero Temperatures [Volume 29, Issue 12, 2016, Pages 1747-1756]
-
Majzoubi, G. H.
A Strain Range Dependent Cyclic Plasticity Model [Volume 30, Issue 2, 2017, Pages 321-329]
-
Majzoubi, G. H.
Performance of a Two-stages Gas Gun: Experimental, Analytical and Numerical Analysis [Volume 32, Issue 5, 2019, Pages 759-768]
-
Makarchi, A.
Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]
-
Makarchian, M.
An Experimental Study of Foundation Underpinning by Piles [Volume 15, Issue 1, 2002, Pages 11-22]
-
Makki, O. M.
Response of Rubcrete Continuous Deep Beams under Sinusoidal Loads [Volume 35, Issue 7, 2022, Pages 1307-1316]
-
Makki, O. M.
Mechanical and Dynamical Properties of Structural Rubcrete Mixes [Volume 35, Issue 9, 2022, Pages 1744-1751]
-
Makmud, Mohamad Zul Hilmey
Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types [Volume 29, Issue 9, 2016, Pages 1257-1262]
-
Makui, A.
An Algorithm to Compute the Complexity of a Static Production Planning (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 57-60]
-
Makui, A.
Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
-
Makui, A.
Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
-
Makui, A.
MODELING RISK OF LOSING A CUSTOMER IN A TWO-ECHELON SUPPLY CHAIN FACING AN INTEGRATED COMPETITOR: A GAME THEORY APPROACH [Volume 25, Issue 1, 2012, Pages 11-34]
-
Makui, A.
A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
-
Makui, A.
Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
-
Makui, A.
A Robust Knapsack Based Constrained Portfolio Optimization [Volume 33, Issue 5, 2020, Pages 841-851]
-
Malek, H.
Learning Document Image Features With SqueezeNet Convolutional Neural Network [Volume 33, Issue 7, 2020, Pages 1201-1207]
-
Malekfar, R.
Validation of Shell Theory for Modeling the Radial Breathing Mode of a Single-Walled Carbon Nanotube (RESEARCH NOTE) [Volume 26, Issue 4, 2013, Pages 447-454]
-
Maleki, A.
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Maleki, A.
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Maleki, A.
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Maleki, A.
Theoretical Analysis on the Behavior of Reinforced Industrial Shed Structures with Shape Memory Alloys [Volume 35, Issue 1, 2022, Pages 228-236]
-
Maleki, A.
Thermal Effects on the Bearing and Ductility of Tubular Reduced Beam Section Connection: Numerical Investigation [Volume 35, Issue 10, 2022, Pages 1895-1905]
-
Maleki, Ahamd
Experimental and Numerical Study of Energy Absorption Capacity of Glass Reinforced SCC Beams [Volume 32, Issue 12, 2019, Pages 1733-1744]
-
Maleki, Ahamd
Performance Evaluation of Curved-TADAS Damper on Seismic Response of Moment Resisting Steel Frame [Volume 33, Issue 1, 2020, Pages 55-67]
-
Maleki, E
Modelling of Conventional and Severe Shot Peening Influence on Properties of High Carbon Steel via Artificial Neural Network [Volume 31, Issue 2, 2018, Pages 382-393]
-
Maleki, Mohammad Reza
Online Monitoring and Fault Diagnosis of Multivariate-attribute Process Mean Using Neural Networks and Discriminant Analysis Technique [Volume 28, Issue 11, 2015, Pages 1634-1643]
-
Maleki, Mohammad Reza
Simultaneous Monitoring of Multivariate Process Mean and Variability in the Presence of Measurement Error with Linearly Increasing Variance under Additive Covariate Model (RESEARCH NOTE) [Volume 29, Issue 4, 2016, Pages 514-523]
-
Maleki, N.
Application of Incomplete Analytic Hierarchy Process and Choquet Integral to Select the best Supplier and Order Allocation in Petroleum Industry [Volume 33, Issue 11, 2020, Pages 2299-2309]
-
Maleki, S.
Compound Strip Method for Plane Stress [Volume 3, Issue 3, 1990, Pages 118-123]
-
Maleki-Ghaleh, Hossein
Titanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process [Volume 26, Issue 7, 2013, Pages 707-712]
-
Malekijavan, A.
A Noise-aware Deep Learning Model for Automatic Modulation Recognition in Radar Signals [Volume 36, Issue 8, 2023, Pages 1459-1467]
-
Malekinejad, Mohsen
A CLOSED FORM SOLUTION FOR FREE VIBRATION ANALYSIS OF TUBE-IN-TUBE SYSTEMS IN TALL BUILDINGS [Volume 25, Issue 2, 2012, Pages 107-114]
-
Malekinejad, Mohsen
A Simple Approach to Static Analysis of Tall Buildings with a Combined Tube-in-tube and Outrigger-belt Truss System Subjected to Lateral Loading [Volume 25, Issue 3, 2012, Pages 289-300]
-
Maleki Rastaghi, M
A Multi-objective Hierarchical Location-allocation Model for the Healthcare Network Design Considering a Referral System [Volume 31, Issue 2, 2018, Pages 365-373]
-
Malekpoor, Mohammad Reza
Behavior of Compacted Lime-soil Columns [Volume 27, Issue 2, 2014, Pages 315-324]
-
Malekzadeh, M.
Multi-objective Optimization of Semi-active Control of Seismically Exited Buildings Using Variable Damper and Genetic Algorithms [Volume 25, Issue 3, 2012, Pages 265-276]
-
Malekzadeh, M.
Robust Attitude Control of Spacecraft Simulator with External Disturbances [Volume 30, Issue 4, 2017, Pages 567-574]
-
Malian, A.
Micro-structural Deformation Field Analysis of Aluminum Foam using Finite Element Method and Digital Image Correlation [Volume 33, Issue 10, 2020, Pages 2065-2078]
-
Malik, O. P.
A Microprocessor-Based Hybrid Duplex Fault-Tolerant System [Volume 4, Issue 1, 1991, Pages 37-44]
-
Malik, O. P.
Application to Adaptive Control to Synchronous Machine Excitation [Volume 4, Issue 1, 1991, Pages 45-52]
-
Malik, O. P.
Studies with a Generalized Neuron Based PSS on a Multi-Machine Power System [Volume 17, Issue 2, 2004, Pages 131-140]
-
Malin Bruntha, P.
An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
-
Mamaghani shishavan, Sajjad
Welding Properties of Polymeric Nanocomposite Parts Containing Alumina Nanoparticles in Friction Stir Welding Proces [Volume 30, Issue 1, 2017, Pages 143-151]
-
Mamaghani Shishavan, S
Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
-
Mamdoohi, Amir Reza
An Approach for the Estimation of Aggregate Potential Telecommuting Demand [Volume 24, Issue 4, 2011, Pages 331-340]
-
Mamo, Y. J.
Tensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades [Volume 33, Issue 2, 2020, Pages 314-319]
-
Manafi, S.
Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity [Volume 21, Issue 2, 2008, Pages 109-116]
-
Manafpour, A. R
A Simplified Modal Pushover Analysis-based Method for Incremental Dynamic Analysis of Regular RC Moment-resisting Frames [Volume 31, Issue 2, 2018, Pages 196-203]
-
Manafpour, A. R.
Effects of Far- and Near-Field Multiple Earthquakes on the RC SDOF Fragility Curves Using Different First Shock Scaling Methods [Volume 31, Issue 9, 2018, Pages 1505-1513]
-
Manavalla, S.
An Innovative and Reliable Hybrid Cooling Method for Electric Vehicle Motors [Volume 37, Issue 7, 2024, Pages 1263-1273]
-
Manavizadeh, N.
A Stochastic Model for Indirect Condition Monitoring Using Proportional Covariate Model [Volume 21, Issue 1, 2008, Pages 45-56]
-
Manda, R.
Universal Filtered Multicarrier Receiver Complexity Reduction to Orthogonal Frequency Division Multiplexing Receiver [Volume 35, Issue 4, 2022, Pages 725-731]
-
Manda, R.
Optimal Filter Length Selection for Universal Filtered Multicarrier Systems [Volume 36, Issue 7, 2023, Pages 1322-1330]
-
Mandal, Amritakar
Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1581-1590]
-
Mandal, N. P.
Experimental Analysis of Square Position on Variable Displacement Electrohydraulic Actuation System by Open Loop Control [Volume 36, Issue 6, 2023, Pages 1185-1192]
-
Mandal, S
Evaluation of Biogas as an Alternative Driving Force of Electrically Operated Vehicles: A Case Study [Volume 31, Issue 5, 2018, Pages 834-840]
-
Manei, S.
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Maneshian, Behnaz
Thermohydrodynamic Characteristics of Journal Bearings Running under Turbulent Condition [Volume 22, Issue 2, 2009, Pages 181-194]
-
Mani, K.
A New Hybrid Framework for Filter based Feature Selection using Information Gain and Symmetric Uncertainty (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 659-667]
-
Manik, P.
Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
-
Manikandan, N.
Mathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 997-1003]
-
Manimaran, A.
Stimulation Behaviour Study on Clay Treated with Ground Granulated Blast Slag and Groundnutshell Ash [Volume 32, Issue 5, 2019, Pages 673-678]
-
Manjunatha, S.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Manne, M.
Enhancing Seismic Design of Non-structural Components Implementing Artificial Intelligence Approach: Predicting Component Dynamic Amplification Factors [Volume 36, Issue 7, 2023, Pages 1211-1218]
-
Manoj kumar, V.
Modelling of Eyeball with Pan/Tilt Mechanism and Intelligent Face Recognition Using Local Binary Pattern Operator [Volume 30, Issue 7, 2017, Pages 1098-1104]
-
Manoj Kumar, V.
Robot Arm Performing Writing through Speech Recognition Using Dynamic Time Warping Algorithm [Volume 30, Issue 8, 2017, Pages 1238-1245]
-
Manouchehri, P.
Distributed Fuzzy Adaptive Sliding Mode Formation for Nonlinear Multi-quadrotor Systems [Volume 33, Issue 5, 2020, Pages 798-804]
-
Manouchehrifar, Afshin
Numerical Prediction of Stator Diameter Effect on the Output Torque of Ultrasonic Traveling-wave Motor, using Finite Elements Simulation [Volume 29, Issue 5, 2016, Pages 715-721]
-
Mansoori, Elham
Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
-
Mansouri, A.
Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
-
Mansouri, F
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Mansouri, H. R.
A New Optimal Distributed Strategy to Mitigate the Phase Imbalance in Smart Grids [Volume 33, Issue 12, 2020, Pages 2489-2495]
-
Mansouri, M. N.
Solution of Flow Field Equations and Verification of Cavitation Problem on Spillway of the dam [Volume 18, Issue 1, 2005, Pages 97-114]
-
Mansouri, N.
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Mansouri, N.
An Efficient Task Scheduling Based on Seagull Optimization Algorithm for Heterogeneous Cloud Computing Platforms [Volume 35, Issue 2, 2022, Pages 433-450]
-
Mansouri, S. H.
Numerical Investigation of Combined Radiation and Nutral Convention Heat Transfer in a Horizonal Annulus [Volume 12, Issue 4, 1999, Pages 259-270]
-
Mansouri, S. H.
The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations [Volume 15, Issue 4, 2002, Pages 395-406]
-
Mansouri, S. H.
Computational Study of Radiative and Convective Heat Transfer in a Cylindrical Combustion Chamber [Volume 16, Issue 2, 2003, Pages 193-204]
-
Mansouri, S. H.
Simulation of Ideal External and Internal Flows with Arbitrary Boundaries Using Schwarz Christoffel Transformation [Volume 17, Issue 4, 2004, Pages 405-414]
-
Mansouri, S. H.
A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
-
Mansourian, H.
Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process [Volume 31, Issue 6, 2018, Pages 877-885]
-
Mansoursamaei, M.
A New Approach Applying Multi-objective Optimization using a Taguchi Fuzzy-based for Tourist Satisfaction Management [Volume 32, Issue 3, 2019, Pages 405-412]
-
Mansyur, M.
Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
-
Manteghi, Manuchehr
A New Model for Fleet Assignment Problem, Case Study of Iran Air Network at Vision 2036 [Volume 28, Issue 11, 2015, Pages 1614-1623]
-
Manzoor Hussain, M.
Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1074-1080]
-
Mao, S.
Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
-
Maoinser, M. A.
Interaction Effect of Depth of Cut, Back Rake Angle and Rock Properties on Temperature of Single Polycrystalline Diamond Compact Cutter [Volume 33, Issue 11, 2020, Pages 2425-2435]
-
Maqsood, Aarish
Hierarchical Deep Learning Model for Tooth Classification in Intra-Oral Dental Photographs [(Articles in Press)]
-
Maraki, M. R.
Experimental Investigation and Statistical Modeling of the Effective Parameters in Charpy Impact Test on AZ31 Magnesium Alloy with V-shape Groove Using Taguchi Method [Volume 33, Issue 12, 2020, Pages 2521-2529]
-
Maraki, M. R.
Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
-
Maram, G.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Marandi, Seyed Morteza
Two and Three-Dimensional Seepage Analysis of Earth Dams Considering Horizontal Filter Blanket Effects (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 187-195]
-
Marandi, Seyed Morteza
Laboratory Studies on the Effect of Vertical Gravel Column Drains on Liquefaction Potential [Volume 24, Issue 3, 2011, Pages 209-226]
-
Marandi, Seyed Morteza
Reducing the Forces Caused by Earthquake on Retaining Walls Using Granulated Rubber-Soil Mixture [Volume 24, Issue 4, 2011, Pages 337-350]
-
Marandi, Seyed Morteza
Parameters Analysis of the Covering Soil of Tunnels Constructed In Liquefiable Soils [Volume 25, Issue 4, 2012, Pages 333-346]
-
Marandi, Seyed Morteza
Laboratory Studies of the Effect of Recycled Glass Powder Additive on the Properties of Polymer Modified Asphalt Binders [Volume 26, Issue 10, 2013, Pages 1183-1190]
-
Marandi, Seyed Morteza
Assessment of Lateral Displacements using Neuro-Fuzzy Group Method of Data Handling Systems [Volume 28, Issue 5, 2015, Pages 677-685]
-
Marandi, Seyed Morteza
Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt [Volume 30, Issue 1, 2017, Pages 40-47]
-
Marandi, S. M.
The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
-
Marandi, S.M.
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Marbout, A.
Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
-
Marchenko, R. S.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Marchione, F.
Investigation of Vibration Modes of Double-lap Adhesive Joints: Effect of Slot [Volume 33, Issue 10, 2020, Pages 1917-1923]
-
Marchione, F.
Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
-
Marchione, F.
Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
-
Marchione, F.
FE analysis of single-lap adhesive joints with tapered adherends [Volume 34, Issue 10, 2021, Pages 2213-2218]
-
Marchione, F.
Analytical Investigation on the Stress Distribution in Structural Elements Reinforced with Laminates Subjected to Axial Loads [Volume 35, Issue 4, 2022, Pages 692-697]
-
Marchione, F.
Shear Stress Distribution in Double-lap Adhesive Joints Reinforced with Nylon Fabric: Numerical Investigation [Volume 36, Issue 1, 2023, Pages 35-40]
-
Marchione, F.
Stone Architecture in Abruzzo: Seismic Risk Analysis of Bell Tower of the Church of San Lorenzo in San Buono [Volume 37, Issue 6, 2024, Pages 1118-1126]
-
Marcokova, M.
Secrecy of Communications in Data Transmission by Impulses with Unknown Moments of Appearance and Disappearance [Volume 32, Issue 4, 2019, Pages 548-554]
-
Mardani, Esfandiar
Physical Nonlinear Analysis of a Beam Under Moving Harmonic Load [Volume 24, Issue 2, 2011, Pages 107-113]
-
Mardani, Esfandiar
Analysis of a Beam under Moving Loads [Volume 24, Issue 3, 2011, Pages 227-236]
-
Mardani, Esfandiar
The analysis of a Beam Made of Physical Nonlinear Material on Elastic Foundation Under a Harmonic Load [Volume 26, Issue 5, 2013, Pages 509-514]
-
Mardi Kolur, Mohsen
Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
-
Marghussian, V.G.
Effect of Particle Size Distribution and Chemical Composition on Properties of Magnesia Chromite Bricks [Volume 15, Issue 2, 2002, Pages 183-190]
-
Maricar, F.
Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
-
Marignetti, F.
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Marimuthu, Perumal
Prediction Model for CNC Turning on AISI316 with Single and Multilayered Cutting tool Using Box Behnken Design (RESEARCH NOTE) [Volume 26, Issue 4, 2013, Pages 401-410]
-
Marjani, A.
Effect of SiO2 Concentration and Time on Stability of TiO2 Zeolite Nanocomposite Membrane in Light Gas Dehumidification [Volume 37, Issue 2, 2024, Pages 365-376]
-
Maroofi, Mohammad
Investigation of Thermoelastic Damping in the Longitudinal Vibration of a Micro Beam [Volume 28, Issue 2, 2015, Pages 314-320]
-
Marouf, Bahereh
Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
-
Marouzi, O.
A Multilayer Motion Direction Based Model for Tracking Vehicles at Intersections [Volume 33, Issue 10, 2020, Pages 1939-1950]
-
Martel, A
Investigation of the Fractional Composition Effect of the Carbonate Weighting Agents on the Rheology of the Clayless Drilling Mud [Volume 31, Issue 7, 2018, Pages 1152-1158]
-
Martínez Guarín, A.
A Coupled Rigid-viscoplastic Numerical Modeling for Evaluating Effects of Shoulder Geometry on Friction Stir-welded Aluminum Alloys [Volume 32, Issue 2, 2019, Pages 313-321]
-
Marto, A.
Batch Study on COD and Ammonia Nitrogen Removal Using Granular Activated Carbon and Cockle Shells [Volume 30, Issue 7, 2017, Pages 937-944]
-
Martynov, A.
Potential of High-Carbon Domanik (Upper Devonian) Shale Deposits: Timan-Pechora Oil and Gas Province Assessment [Volume 37, Issue 8, 2024, Pages 1639-1657]
-
Martynyuk, V. V.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Martyushev, D
Performance Evaluation of Oily Waste Treatment Ways (TECHNICAL NOTE) [Volume 31, Issue 3, 2018, Pages 511-515]
-
Martyushev, Dmitriy
Modeling and Forecasting of Paraffin Settings on an Existing Extractive Fund of Oil Deposits [Volume 32, Issue 12, 2019, Pages 1704-1709]
-
Maruschak, P. O.
Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
-
Mary Sowjanya, A.
Mining Interesting Aspects of a Product using Aspect-based Opinion Mining from Product Reviews (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1707-1713]
-
Marzban, Ehsan
AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
-
Marzbandi, Mousa
OPTIMAL SCHEDULING OF MULTI VECTOR ENERGY NETWORKS CONSIDERING RESILIENCY IMPROVEMENT [(Articles in Press)]
-
Masajedi, R.
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
-
Mashayekhi, H.
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Mashayekhi, M. A.
Numerical Studies on Performance of Helical Pile-supported Embankments Over Soft Clay [Volume 37, Issue 4, 2024, Pages 596-607]
-
Mashhadzadeh, A. H.
Experimental Analysis and Physical Mechanism Investigation of Al2O3 Effect on New and Aged Transformer Oil Properties [Volume 36, Issue 3, 2023, Pages 548-557]
-
Mashitah, M. D.
Pretreated Palm Oil Mill Effluent (POME) Digestion in an Up-Flow Anaerobic Sludge Fixed Film Bioreactor: a Comparative Study [Volume 19, Issue 1, 2006, Pages 1-9]
-
Maslennikov, Dmitry
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Masne, N.
Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion [Volume 35, Issue 10, 2022, Pages 1959-1966]
-
Masne, N.
Effect of Replacement Ratio on Torsional Behaviour of Recycled Aggregate Concrete Beams [Volume 36, Issue 4, 2023, Pages 659-668]
-
Masomi, Mojtaba
Adsorption of Fe (II) from Aqueous Phase by Chitosan: Application of Physical Models and Artificial Neural Network for Prediction of Breakthrough [Volume 26, Issue 8, 2013, Pages 845-858]
-
Masomi, Mojtaba
Adsorption of Phenolic Compounds onto the Activated Carbon Synthesized from Pulp and Paper Mill Sludge: Equilibrium Isotherm, Kinetics, Thermodynamics and Mechanism Studies [Volume 27, Issue 10, 2014, Pages 1485-1494]
-
Masomi Kazraji, S.
Sensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives [Volume 31, Issue 9, 2018, Pages 1536-1545]
-
Masood, S. H.
Development of an Intelligent Cavity Layout Design System for Injection Molding Dies (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 339-348]
-
Masoumi, N.
An Efficient Technique for Substrate Coupling Parasitic Extraction with Application to RF/Microwave Spiral Inductors (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 265-271]
-
Masoumi, N.
Modeling of Substrate Noise Impact on a Single-Ended Cascode LNA in a Lightly Doped Substrate (RESEARCH NOTE) [Volume 23, Issue 1, 2010, Pages 23-28]
-
Massah, S. R.
Seismic Response of 4-Legged Self-Supporting Telecommunication Towers [Volume 20, Issue 2, 2007, Pages 107-126]
-
Mastud, S. A.
Comparative Environmental Impact Assessment of Battery Electric Vehicles and Conventional Vehicles: A Case Study of India [Volume 36, Issue 5, 2023, Pages 965-978]
-
Mathur, R. M.
Dynamic Compensation of Electrical Power Systems Using Multilevel Voltage Source Inverter [Volume 14, Issue 3, 2001, Pages 215-228]
-
Matin, M.
Effect of Training Data Ratio and Normalizing on Fatigue Lifetime Prediction of Aluminum Alloys with Machine Learning [Volume 37, Issue 7, 2024, Pages 1296-1305]
-
Matveev, B. v.
Digital Root-mean-square Signal Meter [Volume 33, Issue 11, 2020, Pages 2201-2208]
-
Matveev, B. V.
Digital Binary Phase-shift Keyed Signal Detector [Volume 32, Issue 4, 2019, Pages 510-518]
-
Mauledoux, M
Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources [Volume 31, Issue 8, 2018, Pages 1215-1221]
-
Mauledoux, M. F.
A Real-time Motion Tracking Wireless System for Upper Limb Exosuit Based on Inertial Measurement Units and Flex Sensors (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 820-827]
-
Mavaddati, S.
Voice-based Age and Gender Recognition using Training Generative Sparse Model [Volume 31, Issue 9, 2018, Pages 1529-1535]
-
Mavaddati, S.
Rice Classification and Quality Detection Based on Sparse Coding Technique [Volume 31, Issue 11, 2018, Pages 1910-1917]
-
Mavaddati, S.
A Voice Activity Detection Algorithm Using Sparse Non-negative Matrix Factorization-based Model Learning in Spectro-Temporal Domain [Volume 36, Issue 8, 2023, Pages 1478-1488]
-
Mazaheri, H.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Mazaheri, H.
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
-
Mazaheri, H.
Fabrication of Pebax/4A Zeolite Nanocomposite Membrane to Enhance CO2 Selectivity Compared to Pure O2, N2, and CH4 Gases [Volume 36, Issue 2, 2023, Pages 408-419]
-
Mazaheri, H.
Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
-
Mazaheri, H.
Effect of SiO2 Concentration and Time on Stability of TiO2 Zeolite Nanocomposite Membrane in Light Gas Dehumidification [Volume 37, Issue 2, 2024, Pages 365-376]
-
Mazaheri, Hossein
Using Experimental Design to Optimize the Photo-degradation of P-Nitro Toluene by Nano-TiO2 in Synthetic Wastewater [Volume 32, Issue 8, 2019, Pages 1074-1081]
-
Mazaheri Body, Kiumars
Adaptive Unstructured Grid Generation Scheme for Solution of the Heat Equation [Volume 13, Issue 4, 2000, Pages 43-54]
-
Mazaheri Body, Kiumars
Numerical Study of Blast Initiation of Detonation Using a Two Step Chemical Kinetics Model [Volume 15, Issue 3, 2002, Pages 213-222]
-
Mazaheri Body, Kiumars
On Line Determination of Optimal Hysteresis Band Amplitudes in Direct Torque Control of Induction Motor Drives [Volume 15, Issue 4, 2002, Pages 329-338]
-
Mazaheri Body, Kiumars
Investigation of Air Turbulence Intensity Effect on the Flame Structure in Different Flame Holder Geometry [Volume 26, Issue 12, 2013, Pages 1423-1432]
-
Mazari, A.
Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
-
Mazari, A.
A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
-
Mazari, Ali
Optimizing DC Microgrid Systems for Efficient Electric Vehicle Battery Charging in Ain El Ibel, Algeria [(Articles in Press)]
-
Mazdak, S
A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold [Volume 31, Issue 3, 2018, Pages 487-494]
-
Mazidi Sharfabadi, Mohsen
Study of Degradation of Dry Cooling Tower Performance under Wind Conditions and Method for Tower Efficiency Enhancement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 460-466]
-
Mazinan, Amir Hooshang
High-Performance Robust Three-Axis Finite-Time Attitude Control Approach Incorporating Quaternion Based Estimation Scheme to Overactuated Spacecraft [Volume 29, Issue 1, 2016, Pages 53-59]
-
Mazinani, M.
A Novel Type-2 Adaptive Neuro Fuzzy Inference System Classifier for Modelling Uncertainty in Prediction of Air Pollution Disaster (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1746-1751]
-
Mazinani, M.
A Multi-objective Cash-in-transit Pollution-location-routing Problem Based on Urban Traffic Conditions [Volume 36, Issue 2, 2023, Pages 299-310]
-
Mazinani, Mahdi
A Fuzzy Rule-based Expert System for the Prognosis of the Risk of Development of the Breast Cancer [Volume 27, Issue 10, 2014, Pages 1557-1564]
-
Mazloom, M.
Seismic Vulnerability Assessment of Existing RC Moment Frames using a New Stiffness Based Damage Index [Volume 36, Issue 5, 2023, Pages 1000-1011]
-
Mazloom, M.
A New Approach for Seismic Damage Detection Based on Results of Pushover Analysis and Modal Based Damage Index [Volume 36, Issue 10, 2023, Pages 1892-1907]
-
Mazloumi, Mahyar
Formation of Lanthanum Hydroxide Nanostructures: Effect of NaOH and KOH Solvents [Volume 21, Issue 2, 2008, Pages 169-176]
-
Mazzeo, Pier Luigi
People Re-identification in Non-overlapping Field-of-views using Cumulative Brightness Transform Function and Body Segments in Different Color Spaces [Volume 28, Issue 12, 2015, Pages 1711-1719]
-
McMahon, C. A.
Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
-
Md Norodin, N. S.
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Md Salleh, L.
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Mechgoug, R.
A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
-
Meddeber, M.
Smart City Surveillance: Edge Technology Face Recognition Robot Deep Learning Based [Volume 37, Issue 1, 2024, Pages 25-36]
-
Medhlom, M. K.
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Medjdoubi, A.
Smart City Surveillance: Edge Technology Face Recognition Robot Deep Learning Based [Volume 37, Issue 1, 2024, Pages 25-36]
-
Meek, J. L.
Harmonic Response of Pile Groups to Dynamic Loading [Volume 1, Issue 1, 1988, Pages 29-36]
-
Meghdari, Ali
Modeling Flexibility Effects in Robotic Arms Via the Modified 4x4 D-H Homogeneous Transformation [Volume 3, Issue 3, 1990, Pages 124-133]
-
Meghdari, Ali
Dynamics of Flexible Manipulators [Volume 7, Issue 1, 1994, Pages 19-32]
-
Meghdari, Ali
A New Approach for Vibration Analysis of a Cracked Beam [Volume 18, Issue 4, 2005, Pages 319-330]
-
Mehdi, S. N.
Performance and Emission Characteristics of a Diesel Engine with Cottonseed Oil Plus Diesel Oil Blends [Volume 18, Issue 1, 2005, Pages 1-7]
-
Mehdianfar, P.
Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
-
Mehdikhani, Behzad
Synthesis of Tantalum Carbide/Boride Nano Composite Powders by Mechanochemical Method [Volume 27, Issue 5, 2014, Pages 769-774]
-
Mehdipoor, M.
A New Structure for Direct Measurement of Temperature Based on Negative Temperature Coefficient Thermistor and Adaptive Neuro-fuzzy Inference System [Volume 31, Issue 10, 2018, Pages 1682-1688]
-
Mehdipour, R.
A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
-
Mehdipour, Ramin
Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
-
Mehditabar, Aref
Three-dimensional Magneto-thermo-elastic Analysis of Functionally Graded Truncated Conical Shells [Volume 26, Issue 12, 2013, Pages 1445-1460]
-
Mehdizadeh, Abbas
Secured Route Optimization and Micro-mobility with Enhanced Handover Scheme in Mobile IPv6 Networks [Volume 29, Issue 11, 2016, Pages 1530-1538]
-
Mehdizadeh, E.
A New ILP Model for Identical Parallel-Machine Scheduling with Family Setup Times Minimizing the Total Weighted Flow Time by a Genetic Algorithm [Volume 20, Issue 2, 2007, Pages 183-194]
-
Mehdizadeh, Esmaeil
Three Meta-heuristic Algorithms for the Single-item Capacitated Lot-sizing Problem (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1223-1232]
-
Mehdizadeh, Esmaeil
Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
-
Mehdizadeh, Esmaeil
A New Mathematical Model for a Multi-product Supply Chain Network with a Preventive Maintenance Policy [Volume 32, Issue 10, 2019, Pages 1446-1453]
-
Mehdizadeh, H.
Overview of Reverse Osmosis for Chemical Engineers Part 1, Fundamentals of Membrane Mass Transfer [Volume 1, Issue 4, 1988, Pages 163-180]
-
Mehdizadeh, H.
Overview of Reverse Osmosis for Chemical Engineers. Part 2: Applications of Transport Models [Volume 4, Issue 3, 1991, Pages 77-92]
-
Mehdizadeh, M.
The Effect of Sulfate Concentration on COD Removal and Sludge Granulation in UASB Reactors [Volume 16, Issue 1, 2003, Pages 1-10]
-
Mehdizadeh, S.Jafar
Environmental Impact of Fossil Fuel Utilization in Neka Thermal Power Plant [Volume 23, Issue 2, 2010, Pages 115-120]
-
Mehmood, Nasir
Study of NACA 0015 for Diffuser Design in Tidal Current Turbine Applications (TECHNICAL NOTE) [Volume 25, Issue 4, 2012, Pages 373-380]
-
Mehrabi, Kamran
Numerical and Analytical Investigation in Radiated Noise by a Shock-Absorber [Volume 26, Issue 12, 2013, Pages 1525-1534]
-
Mehrabian, M. A.
The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations [Volume 15, Issue 4, 2002, Pages 395-406]
-
Mehrabian, M. A.
Computational Study of Radiative and Convective Heat Transfer in a Cylindrical Combustion Chamber [Volume 16, Issue 2, 2003, Pages 193-204]
-
Mehrabian, M. A.
Simulation of Ideal External and Internal Flows with Arbitrary Boundaries Using Schwarz Christoffel Transformation [Volume 17, Issue 4, 2004, Pages 405-414]
-
Mehrabian, M. A.
The Effects of an Imposed Magnetic Field on Natural Convection in a Tilted Cavity with Partially Active Vertical Walls:Numerical Approach [Volume 23, Issue 1, 2010, Pages 65-78]
-
Mehrabian, M. A.
Convective Heat Transfer from a Heated Rotating Disk at Arbitrary Inclination Angle in Laminar Flow [Volume 26, Issue 8, 2013, Pages 865-874]
-
Mehrabiyan, M.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Mehrad-Pay, L.
Optimal Control of Service Rate in a Service Center with Lapse (Research Note) [Volume 17, Issue 3, 2004, Pages 289-298]
-
Mehranfar, Nasrin
A Novel Hybrid Whale Optimization Algorithm to Solve a Production-Distribution Network Problem Considering Carbon Emissions [Volume 32, Issue 12, 2019, Pages 1781-1789]
-
Mehranpoura, M.
Dual-band, Dynamically Tunable Plasmonic Metamaterial Absorbers Based on Graphene for Terahertz Frequencies [Volume 32, Issue 4, 2019, Pages 503-509]
-
Mehrasa, M.
A Robust Renewable Energy Source-oriented Strategy for Smart Charging of Plug-in Electric Vehicles Considering Diverse Uncertainty Resources [Volume 36, Issue 4, 2023, Pages 709-719]
-
Mehrdad, M.A.
Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm [Volume 25, Issue 3, 2012, Pages 239-248]
-
Mehrdadi, N.
Effect of Combined Different Sources of Alumina Silicate on Mechanical Properties and Carbonation Depth of Environmentally Friendly Geopolymeric Composite Based on Metakaolin [Volume 36, Issue 7, 2023, Pages 1383-1397]
-
Mehrgan, K.
Super-resolution of License-plates Using Weighted Interpolation of Neighboring Pixels from Video Frames [Volume 33, Issue 5, 2020, Pages 992-999]
-
Mehri, A.
Role of Interatomic Potentials in Simulation of Thermal Transport in Carbon Nanotubes [Volume 30, Issue 8, 2017, Pages 1231-1237]
-
Mehri, B.
Vibration of Road Vehicles with Non linear Suspensions [Volume 10, Issue 4, 1997, Pages 209-218]
-
Mehri, F.
Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures [Volume 36, Issue 3, 2023, Pages 594-603]
-
Mehrizi, V. A.
Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
-
Mehrjuee, Mehtnaz
Electrophoretic Synthesis of Titanium Oxide Nanotubes [Volume 25, Issue 4, 2012, Pages 343-350]
-
Mehrotra, D.
Analyse Power Consumption by Mobile Applications Using Fuzzy Clustering Approach [Volume 31, Issue 12, 2018, Pages 2037-2043]
-
Mehrpanahi, Abdollah
Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
-
Mehta, T. A.
Real Time Emotion Recognition with AD8232 ECG Sensor for Classwise Performance Evaluation of Machine Learning Methods [Volume 36, Issue 6, 2023, Pages 1040-1047]
-
Meidani, M.
Slope Stability Analysis Using A Non-linear Optimization Technique (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 147-156]
-
Meinel, Christoph
A Hybrid Machine Learning Method for Intrusion Detection [Volume 29, Issue 9, 2016, Pages 1242-1246]
-
Mekhilef, S.
Generation of Three-Phase PWM Inverter using Xilinx FPGA and its Application for Utility Connected PV System (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 273-278]
-
Mekki, I. E. K.
Design of a Printed Circuit Board for Real-time Monitoring and Control of Pipeline’s Cathodic Protection System via IoT and a Cloud Platform [Volume 36, Issue 9, 2023, Pages 1667-1676]
-
Mekonnen, B. Y.
Tensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades [Volume 33, Issue 2, 2020, Pages 314-319]
-
Mellah, H.
Inrush Current Reduction by a Point-on-wave Energization Strategy and Sequential Phase Shifting in Three-Phase Transformer [Volume 35, Issue 12, 2022, Pages 2321-2328]
-
Melnikov, P. V.
Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media [Volume 32, Issue 5, 2019, Pages 641-646]
-
Melnikov, Serhij
Bertrand-nash Equilibrium in the Retail Duopoly Model under Asymmetric Costs [Volume 30, Issue 6, 2017, Pages 859-866]
-
Memariani, A.
Bicriteria Resource Allocation Problem in Pert Networks [Volume 17, Issue 2, 2004, Pages 157-168]
-
Memariani, A.
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Memariyan, Farnaz
Study on Wicking Measurement in Thin Layer Textiles by Processing Digital Images [Volume 23, Issue 1, 2010, Pages 101-108]
-
Memarzadeh, R.
Numerical Simulation of Seepage Flow through Dam Foundation Using Smooth Particle Hydrodynamics Method (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 484-488]
-
Menasri, Y.
Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
-
Meng, Liu
Estimation and Prediction of Residential Building Energy Consumption in Rural Areas of Chongqing [Volume 26, Issue 9, 2013, Pages 955-962]
-
Menghani, J.
Metallurgical and Mechanical Properties of Laser Cladded AlFeCuCrCoNi-WC10 High Entropy Alloy Coating [Volume 33, Issue 7, 2020, Pages 1397-1402]
-
Menghani, J.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Menghani, J. V.
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Menghani, J. V.
Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
-
Menghani, J. V.
Effect of Friction Stir Processing on Fusion Welded Joint of Al-5083 [Volume 35, Issue 9, 2022, Pages 1735-1743]
-
Menghani, J. V.
Fabrication of Aluminum 5083/SiC Surface Composite on Tungsten Inert Gas Weld Joint by Novel Direct Friction Stir Processing Technique [Volume 36, Issue 3, 2023, Pages 523-531]
-
Menhaj, M.B.
A New Iterative Fuzzy-Based Method for Image Enhancement (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 69-74]
-
Menhaj, M.B.
A New Class of Decentralized Interaction Estimators for Load Frequency Control in Multi-Area Power Systems [Volume 16, Issue 4, 2003, Pages 347-356]
-
Menhaj, M.B.
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Menon, S. S.
Effects of Inflation Pressure and Wall Thickness on Gripping Force of Semi-Cylindrical Shaped Soft Actuator: Numerical Investigation [Volume 35, Issue 12, 2022, Pages 2350-2358]
-
Mentsiev, Adam
Land assessment in mining regions considering ecology [(Articles in Press)]
-
MERABET, A
Modeling of Combustion and Carbon Oxides Formation in Direct Injection Diesel Engine [Volume 25, Issue 3, 2012, Pages 211-220]
-
Meratian, Mahmood
Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
-
Mergu, K.
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Mesbah, M.
Newborn EEG Seizure Detection Based on Interspike Space Distribution in the Time-Frequency Domain [Volume 20, Issue 2, 2007, Pages 137-146]
-
Mesgar, Moazameh
Dynamic Performance Analysis and Simulation of a Full Scale Activated Sludge System Treating an Industrial Wastewater Using Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 465-472]
-
Meshkat Rouhani, V. R.
Experimental and Numerical Study on a New Double-walled Tuned Liquid Damper [Volume 35, Issue 1, 2022, Pages 29-44]
-
Meybodi, M.R.
A Two-Threshold Guard Channel Scheme for Minimizing Blocking Probability in Communication Networks [Volume 17, Issue 3, 2004, Pages 247-264]
-
Meyghani, B.
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Meyghani, Bahman
Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1480-1484]
-
MHAMDI, Lotfi
Using Interval Petri Nets and Timed Automata for Diagnosis of Discrete Event Systems (DES) [Volume 27, Issue 1, 2014, Pages 113-122]
-
Miar Naimi, H.
Design of a High Range, High Efficiency Spread Spectrum Transmitter for Audio Communication Applications [Volume 32, Issue 8, 2019, Pages 1144-1154]
-
Miar-Naimi, H.
A Modified Noise Analysis of a Common Source ̶ Common Gate Low Noise Transconductance Amplifier for Sub-micron Technologies [Volume 31, Issue 11, 2018, Pages 1903-1909]
-
Miar-Naimi, H.
A Phase Noise Reduction Technique in LC Cross-coupled Oscillators with Adjusting Transistors Operating Regions [Volume 33, Issue 4, 2020, Pages 560-566]
-
MiarNaimi, H.
Image Restoration Using A PDE-Based Approach [Volume 20, Issue 3, 2007, Pages 225-236]
-
MiarNaimi, H.
Statistical Background Modeling Based on Velocity and Orientation of Moving Objects [Volume 21, Issue 1, 2008, Pages 39-54]
-
MiarNaimi, H.
A Novel Low Voltage, Low Power and High Gain Operational Amplifier Using Negative Resistance and Self Cascode Transistors [Volume 26, Issue 3, 2013, Pages 303-308]
-
MiarNaimi, H.
Analysis of Oscillation Amplitude and Phase Error in Multiphase LC Oscillators [Volume 26, Issue 6, 2013, Pages 587-596]
-
MiarNaimi, H.
Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
-
MiarNaimi, H.
Effective Design of a 3×4 Two Dimensional Distributed Amplifier Based on Gate Line Considerations [Volume 30, Issue 6, 2017, Pages 830-838]
-
Mibang, D.
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Mikhailov, A. V.
Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
-
Minaei, M.
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
-
Minaei, Mohammad
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation [Volume 33, Issue 1, 2020, Pages 148-157]
-
Minaeian, S.
A New Multi-Objective Model for Dynamic Cell Formation Problem with Fuzzy Parameters [Volume 21, Issue 2, 2008, Pages 159-172]
-
Minaeian, S.
Prediction of Deformation of Circular Plates Subjected to Impulsive Loading Using GMDH-type Neural Network [Volume 27, Issue 10, 2014, Pages 1635-1644]
-
Minaii, K.
Effect of Residual Stress on Failure of Tube-to-tubesheet Weld in Heat Exchangers [Volume 32, Issue 1, 2019, Pages 112-120]
-
Minapoor, Shohreh
Investigating the Effect of Underlying Fabric on the Bagging Behaviour of Denim Fabrics (RESEARCH NOTE) [Volume 32, Issue 9, 2019, Pages 1231-1237]
-
Minatour, Yasser
Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
-
Minh, N. D.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Minouei, Hossein
Effect of Mold Preheating on the Microstructure of the Investment Cast Astm F-75 Implant Alloy [Volume 24, Issue 1, 2011, Pages 49-53]
-
Mir, B.A.
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Mirabdolah lavasani, arash
Numerical Solution of Fence Performance for Reduction of Sand Deposition on Railway Tracks [Volume 29, Issue 7, 2016, Pages 1014-1021]
-
Mirabdolazimi, S. M.
New Model for Visco-Elastic Behavior of Asphalt Mixture with Combined Effect of Stress and Temperature [Volume 31, Issue 6, 2018, Pages 894-902]
-
Mirabedi, S. M. M.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Mirabootalebi, S. O.
Investigation on Mechanical and Electrical Properties of Cu-Ti Nanocomposite Produced by Mechanical Alloying [Volume 33, Issue 9, 2020, Pages 1759-1765]
-
Mirabootalebi, S. O.
Prediction of Hardness of Copper-based Nanocomposites Fabricated by Ball-milling using Artificial Neural Network [Volume 36, Issue 10, 2023, Pages 1932-1941]
-
Mirabootalebi, S.O
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Mirasa, Abdul Karim
Seismic Performance of Low-Ductility Precast Wall Structure with Base Isolation [Volume 26, Issue 2, 2013, Pages 153-162]
-
Mirayababu, K.
Mining Interesting Aspects of a Product using Aspect-based Opinion Mining from Product Reviews (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1707-1713]
-
Mirbagheri, S. A.
A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
-
Mirbozorgi, Seyedabdollah
A lattice-adaptive model for solving acoustic wave equations based on the lattice Boltzmann method [(Articles in Press)]
-
Mirbozorgi, Seyed Ali
A lattice-adaptive model for solving acoustic wave equations based on the lattice Boltzmann method [(Articles in Press)]
-
Mirchenari ‎, Saeed ‎
Removal of Congo Red Anionic Dye from Aqueous Solution Using Polyaniline/TiO2 and Polypyrrole/TiO2 Nanocomposites: Isotherm, Kinetic, and Thermodynamic Studies [Volume 29, Issue 12, 2016, Pages 1659-1669]
-
Mireshghi, M.
Simulation of a Neutron Detector for Real Time Imaging Applications [Volume 11, Issue 4, 1998, Pages 207-212]
-
Mirfatah, Seyed Mostafa
Application of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 667-674]
-
Mirgorbani, S.M.
An Efficient Algorithm to Inter and Intra-Cell Layout Problems in Cellular Manufacturing Systems with Stochastic Demands [Volume 19, Issue 1, 2006, Pages 67-78]
-
Mirhadi, Sayed Mehdi
Synthesis and Characterization of Highly Porous TiO2 Scaffolds for Bone Defects [Volume 33, Issue 1, 2020, Pages 134-140]
-
Mirhadi, S. M.
Study on Polycaprolactone Coated Hierarchical Meso/ Macroporous Titania Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1887-1894]
-
Mirhoseini, S.Mohammad
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Mirhoseini Hezaveh, Seyyd Mohammad
Effect of Initial Local Failure Type on Steel Braced Frame Buildings against Progressive Collapse [Volume 33, Issue 1, 2020, Pages 34-46]
-
Mirhosseini, N.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Mirhosseini, N.
Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
-
Mirhosseini, S. M.
Predicting Shear Capacity of Panel Zone Using Neural Network and Genetic Algorithm [Volume 33, Issue 8, 2020, Pages 1512-1521]
-
Mirhosseini, S. M.
Experimental Study on Bonding CFRP to Fiber Concrete Beam Considering the Effect of using Nanographene Oxide in Improving the Mechanical Properties of Polyamine Resin [Volume 35, Issue 8, 2022, Pages 1524-1532]
-
Mirhosseini, S. M.
Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
-
Mirhosseini, S.M.
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Mirhosseini Moghadam, M.
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Mirimani, S.M.
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Miripour Fard, Behanm
Receding Horizon Based Control of Disturbed Upright Balance with Consideration of Foot Tilting(RESEARCH NOTE) [Volume 26, Issue 10, 2013, Pages 1243-1254]
-
Mirmiran, S.
Applicability of Elastic Analysis for Predicting the Settlement Distribution Around Tunneling in Soft Ground (TECHNICAL NOTE) [Volume 16, Issue 3, 2003, Pages 217-234]
-
Mir Mohammad Hosseini, S. M.
Soil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions [Volume 15, Issue 2, 2002, Pages 117-124]
-
Mirmohammadi, S. H.
A Novel Sustainable Closed-loop Supply Chain Network Design by Considering Routing and Quality of Products [Volume 31, Issue 11, 2018, Pages 1918-1928]
-
Mir Mohammad Sadeghi, S. A.
Experimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator [Volume 32, Issue 1, 2019, Pages 71-77]
-
Mirmomeni, M.
Model Based Method for Determining the Minimum Embedding Dimension from Solar Activity Chaotic Time Series [Volume 21, Issue 1, 2008, Pages 31-44]
-
Mirmomeni, M.
An Unsupervised Learning Method for an Attacker Agent in Robot Soccer Competitions Based on the Kohonen Neural Network [Volume 21, Issue 3, 2008, Pages 255-268]
-
Mirnia, K.
An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
-
Mirnia, M. J.
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming [Volume 33, Issue 5, 2020, Pages 906-915]
-
Mironova, K. V.
Investigations on Material Composition of Iron-containing Tails of Enrichment of Combined Mining and Processing in Kursk Magnetic Anomaly of Russia [Volume 33, Issue 7, 2020, Pages 1431-1439]
-
Miroshnichenko, N.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Miroud, D.
Metallurgical and Mechanical Behavior of AISI 316- AISI 304 during Friction Welding Process [Volume 32, Issue 2, 2019, Pages 306-312]
-
Miroud, D.
Experimental Investigation of Friction Pressure Influence on the Characterizations of Friction Welding Joint for AISI 316 [Volume 33, Issue 12, 2020, Pages 2514-2520]
-
Miroud, D.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Mirrashid, N.
Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
-
Mirrezaei, S. M.
Bandwidth and Delay Optimization by Integration of Software Trust Estimator with Multi-user Cloud Resource Competence [Volume 33, Issue 7, 2020, Pages 1192-1200]
-
Mirsalim, M
Toward an Improvement of Natural Gas-diesel Dual Fuel Engine Operation at Part Load Condition by Detail CFD Simulation [Volume 31, Issue 7, 2018, Pages 1082-1087]
-
Mirvakili, S.Ali
Effect of Chromium Content on Formation of (Mo1-x-Crx) Si2 Nanocomposite Powders via Mechanical Alloying [Volume 25, Issue 2, 2012, Pages 99-104]
-
Mirvakili, Seyed Mohammad
An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids [Volume 33, Issue 1, 2020, Pages 28-33]
-
Mirzabeigy, Alborz
Semi-analytical Approach for Free Vibration Analysis of Variable Cross-Section Beams Resting on Elastic Foundation and under Axial Force [Volume 27, Issue 3, 2014, Pages 385-394]
-
Mirzadeh, I.
Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
-
Mirzaee, B.
Finite Volume Solution of a Cylinder in Cross Flow with Heat Transfer [Volume 15, Issue 3, 2002, Pages 303-314]
-
Mirzaee, F.
Solution of Wave Equations Near Seawalls by Finite Element Method [Volume 21, Issue 1, 2008, Pages 1-16]
-
Mirzaee, I.
Local Heat Transfer Coefficients in a Rectangular Duct with Plate Blockages of Variable Stream Wise Spacing [Volume 7, Issue 1, 1994, Pages 33-40]
-
Mirzaee, I.
Numerical Analysis on Flow Characteristics of Gas-liquid Two-phase Flow in a Vertical Pipe with Downward Stream [Volume 36, Issue 3, 2023, Pages 540-547]
-
Mirzaei, A.
Designing a Genetic-Fuzzy Anti-Lock Brake System Controller (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 197-205]
-
Mirzaei, A. M.
Numerical Study and Comparison of Two-dimensional Ferrofluid Flow in Semi-porous Channel under Magnetic Field [Volume 36, Issue 11, 2023, Pages 2087-2101]
-
Mirzaei, Ebrahim
Application of Interval-valued Fuzzy Analytic Hierarchy Process Approach in Selection Cargo Terminals, a Case Study [Volume 28, Issue 3, 2015, Pages 387-395]
-
Mirzaei, F.
Feature Selection for Small Sample Sets with High Dimensional Data Using Heuristic Hybrid Approach [Volume 33, Issue 2, 2020, Pages 213-220]
-
Mirzaei, Zeinabsadat
Modeling and Simulation of Modern Industrial Screens using Discrete Element Method (TECHNICAL NOTE) [Volume 26, Issue 8, 2013, Pages 927-932]
-
Mirzaeian, B.
A Fuzzy Expert System for Predicting the Performance of Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 229-238]
-
Mirzaeian, B.
Designing a Genetic-Fuzzy Anti-Lock Brake System Controller (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 197-205]
-
Mirzaeifar, R.
Analysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives [Volume 21, Issue 1, 2008, Pages 85-96]
-
Mirzaei Moghadam, Iman
Influence of Nano-silica and Polypropylene Fibers on Bond Strength of Reinforcement and Structural Lightweight Concrete (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 261-268]
-
M.irzaei Teshnizi, M.
Centralized Path Planning for Multi-aircraft in the Presence of Static and Moving Obstacles [Volume 33, Issue 5, 2020, Pages 923-933]
-
Mirzahosseinian, H.
A New Multi-Objective Model for a Cell Formation Problem Considering Machine Utilization and Alternative Process Routes (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 21-32]
-
Mirzahosseinian, H.
Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
-
Mirzaie, I.
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Mirzamohammadi, H.
Mathematical Model for Separation of Submicron Particles from Gas Stream in a Conduit Type Scrubber (RESEARCH NOTE). [Volume 3, Issue 1, 1990, Pages 73-75]
-
Mirzamohammadi, S.
Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
-
Mirzapour, Jamil
Moving Load Analysis of Submerged Floating Tunnels [Volume 25, Issue 1, 2012, Pages 17-24]
-
Mirzapour, Jamil
Dynamic Response of Submerged Vertical Cylinder with Lumped Mass under Seismic Excitation [Volume 27, Issue 10, 2014, Pages 1547-1556]
-
Mirzarezaee, M.
Foreground Extraction Using Hilbert-Schmidt Independence Criterion and Particle Swarm Optimization Independent Component Analysis [Volume 33, Issue 5, 2020, Pages 1020-1026]
-
Mirzarezaee, M.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Mirzavand, Kamran
Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method [Volume 32, Issue 6, 2019, Pages 860-865]
-
Mirzavand, R.
Effect of Steps Height and Glass Cover Angle on Heat Transfer Performance for Solar Distillation: Numerical Study [Volume 35, Issue 1, 2022, Pages 237-247]
-
Mishra, A.
Determination of Shock Standoff Distance for Wedge at Supersonic Flow [Volume 32, Issue 7, 2019, Pages 1049-1056]
-
Mishra, O.
Modal Frequencies Based Human Action Recognition Using Silhouettes And Simplicial Elements [Volume 35, Issue 1, 2022, Pages 45-52]
-
Mishra, Rajesh
Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE) [Volume 27, Issue 10, 2014, Pages 1581-1590]
-
MISHRA, ASHISH
Maintainability Policy for Deteriorating System with Inspection and Common Cause Failure (TECHNICAL NOTE) [Volume 26, Issue 6, 2013, Pages 631-640]
-
MISHRA, ASHISH
Availability of k-out-of-n: F Secondary Subsystem with General Repair Time Distribution [Volume 26, Issue 7, 2013, Pages 743-752]
-
Mitaphonna, R.
Discrimination of Plastic Waste using Laser-induced Breakdown Spectroscopy-principal Component Analysis: Highlighting Molecular LIBS [Volume 36, Issue 1, 2023, Pages 98-107]
-
Mitra, R.
Natural and Artificial Fibre Reinforced Concrete: A State-of-art Review [Volume 37, Issue 3, 2024, Pages 503-510]
-
M. M., Mahmoud
Study on the Friction of Bored Cylindrical Rubber Protrusions Sliding on Ceramic [Volume 30, Issue 5, 2017, Pages 768-774]
-
Moallem, M.
a Simple Speed Control Technique and Pulsating Torque Elimination Method in a Brushless Dc Motor [Volume 13, Issue 2, 2000, Pages 19-26]
-
Moallem, M.
A Fuzzy Expert System for Predicting the Performance of Switched Reluctance Motor [Volume 14, Issue 3, 2001, Pages 229-238]
-
Moallem, M.
A Novel Technique on the Analytical Calculation of Open-Circuit Flux Density Distribution in Brushless Permanent-Magnet Motor [Volume 17, Issue 1, 2004, Pages 51-58]
-
Moallem, M.
Designing a Genetic-Fuzzy Anti-Lock Brake System Controller (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 197-205]
-
Moallem, Payman
A Novel Temporal-Frequency Domain Error Concealment Method for Motion Jpeg [Volume 23, Issue 2, 2010, Pages 121-132]
-
Moallem, Payman
A Novel Design of Reversible Multiplier Circuit (TECHNICAL NOTE) [Volume 26, Issue 6, 2013, Pages 577-586]
-
Moallem, Payman
Real Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology [Volume 26, Issue 11, 2013, Pages 1347-1356]
-
Moameri, S.
Diagnosis of Coronary Artery Disease via a Novel Fuzzy Expert System Optimized by Cuckoo Search [Volume 31, Issue 12, 2018, Pages 2028-2036]
-
Moaref, Afsoon
Fuzzy-rough Information Gain Ratio Approach to Filter-wrapper Feature Selection [Volume 30, Issue 9, 2017, Pages 1326-1333]
-
Moayed, Mohammad Hadi
An Investigation on the Performance of an Imidazoline Based Commercial Corrosion Inhibitor on CO2 Corrosion of Mild Steel [Volume 20, Issue 1, 2007, Pages 35-44]
-
Moayed, Mohammad Hadi
Study of Pitting Corrosion Inhibition of Mild Steel by Nitrite in Concrete Pore Solution by Polarization and Zero Resistance Ammetery (ZRA) Techniques (RESEARCH NOTE) [Volume 22, Issue 4, 2009, Pages 369-380]
-
Moayed, Mohammad Hadi
Inhibitive Assesment of Stearamide as a Corrosion Inhibitor for Mild Steel in HCl Solution [Volume 25, Issue 2, 2012, Pages 119-126]
-
Moayed, Mohammad Hadi
Corrosion Behavior of a Fe-25at%Sn Supersaturated Solid Solution in H3PO4 Solution [Volume 25, Issue 2, 2012, Pages 127-134]
-
Moayedian, M
Explicit Stiffness of Tapered and Monosymmetric i Beam-Columns [Volume 13, Issue 2, 2000, Pages 1-18]
-
Moayyedian, Farzad
A CLOSED-FORM NON- LINEAR SOLUTION FOR PLASTIC FLANGE WRINKLING OF CIRCULAR PLATES IN DEEP DRAWING PROCESS [Volume 23, Issue 3, 2010, Pages 203-214]
-
Moayyedian, Farzad
A General Solution for Implicit Time Stepping Scheme in Rate-dependant Plasticity [Volume 26, Issue 6, 2013, Pages 641-652]
-
Moayyedian, Farzad
A Study on Combination of von Mises and Tresca Yield Loci In Non-Associated Viscoplasticity [Volume 27, Issue 3, 2014, Pages 441-448]
-
Moayyedian, M.
Proposed Dynamic Soil Pressure Diagram On Rigid Walls. [Volume 21, Issue 3, 2008, Pages 213-224]
-
Moazemi Goudarzi, A.
Enhancing Performance of an Air Conditioner by Preheating and Precooling of Liquid Desiccant and Non-processed Air [Volume 35, Issue 2, 2022, Pages 425-432]
-
Moazemi Goudarzi, A.
Design and Evaluation a New Type of Semi-active Lower Limb with Knee Joint Booster [Volume 37, Issue 5, 2024, Pages 842-851]
-
Moazemi Goudarzi, A.
Compressive Mechanical Properties and Water Absorption of Glass fiber-reinforced Plastics Pipes Aged in Caspian SeaWater [Volume 37, Issue 6, 2024, Pages 1146-1153]
-
Moazemi Goudarzi, Ali
The biomechanical evaluation of a compliance joint Knee exoskeleton During a normal gait [(Articles in Press)]
-
Moazeni, Malihe
Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
-
Moazenzadeh, D
Analysis and Development of Technology Acceptance Model in Mobile Bank Field [Volume 31, Issue 9, 2018, Pages 1521-1528]
-
Mobadersani, F.
Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena [Volume 32, Issue 4, 2019, Pages 569-579]
-
Mobadersani, F.
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Mobadersani, Farrokh
Investigation of Entropy Generation Through the Operation of an Unlooped Pulsating Heat Pipe [Volume 29, Issue 8, 2016, Pages 1151-1159]
-
Mobini, kamran
Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
-
Mobini, M.
Optimal Singular Value Decomposition Based Pre-coding for Secret Key Extraction from Correlated Orthogonal Frequency Division Multiplexing Sub-channels [Volume 33, Issue 7, 2020, Pages 1214-1222]
-
Mobini, M.
A Behavioural Model for Accurate Investigation of Noisy Lorenz Chaotic Synchronization Systems [Volume 36, Issue 8, 2023, Pages 1502-1508]
-
Mobki, Hamed
Application of Thau Observer for Fault Detection of Micro Parallel Plate Capacitor Subjected to Nonlinear Electrostatic Force [Volume 28, Issue 2, 2015, Pages 270-276]
-
Mobki, Hamed
Design of Direct Exponential Observers for Fault Detection of Nonlinear MEMS Tunable Capacitor [Volume 28, Issue 4, 2015, Pages 634-641]
-
Mobki, Hamed
State Estimation of MEMs Capacitor Using Taylor Expansion [Volume 28, Issue 5, 2015, Pages 764-770]
-
Modanloo, V.
Investigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process [Volume 33, Issue 2, 2020, Pages 344-349]
-
Modanloo, Vahid
The Study of Deep Drawing of Brass-steel Laminated Sheet Composite Using Taguchi Method [Volume 29, Issue 1, 2016, Pages 103-108]
-
Modanloo, Vahid
Minimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method [Volume 29, Issue 2, 2016, Pages 264-273]
-
Modanloo, Vahid
Experimental Investigation of the Effect of Process Parameters on the Surface Roughness in Finishing Process of Chrome Coated Printing Cylinders (TECHNICAL NOTE) [Volume 29, Issue 12, 2016, Pages 1775-1782]
-
Modanloo, Vahid
Investigation of the Forming Force in Torsion Extrusion Process of Aluminum Alloy 1050 [Volume 30, Issue 6, 2017, Pages 920-925]
-
Modares, S.
A Bi-objective Stochastic Optimization Model for Humanitarian Relief Chain by Using Evolutionary Algorithms [Volume 30, Issue 10, 2017, Pages 1526-1537]
-
Modaresahmadi, Sina
Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers [Volume 28, Issue 9, 2015, Pages 1351-1358]
-
Modarres, J.
Estimation of Kinetic Parameters of Coking Reaction Rate in Pyrolysis of Naphtha [Volume 17, Issue 4, 2004, Pages 319-332]
-
Modarres-Yazdi, M.
A Single Supplier Procurement Model With Random Yield [Volume 6, Issue 2, 1993, Pages 95-108]
-
Modarres-Yazdi, M.
Optimal Solution in a Constrained Distribution System [Volume 15, Issue 2, 2002, Pages 179-190]
-
Modarres-Yazdi, M.
Longest Path in Networks of Queues in the Steady-State [Volume 17, Issue 1, 2004, Pages 33-50]
-
Modarres-Yazdi, M.
Service Level Based Capacity Rationing Procedure for Make-To-Order Manufacturing Systems [Volume 20, Issue 1, 2007, Pages 1-16]
-
Moeinzadeh, B.
A Multivariate Quality Control Procedure in Multistage Production Systems [Volume 10, Issue 4, 1997, Pages 191-208]
-
Moeinzadeh, B.
On the Performance of a Multivariate Control Chart in Multistage Environment [Volume 14, Issue 1, 2001, Pages 49-64]
-
Moffed Kassem, M.
Assessment of Structure-Specific Fragility Curves for Soft Storey Buildings Implementing IDA and SPO Approaches [Volume 31, Issue 12, 2018, Pages 2016-2021]
-
Mofidian, R.
Generation Process and Performance Evaluation of Engineered Microsphere Agarose Adsorbent for Application in Fluidized-bed Systems [Volume 33, Issue 8, 2020, Pages 1450-1458]
-
Mofid Nakhaei, Amar
A Simple Method for Modeling Open Cracked Beam [Volume 28, Issue 2, 2015, Pages 321-329]
-
Moghadam, O.
Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
-
Moghadam-Fard, Hamid
Active Suspension System Control Using Adaptive Neuro Fuzzy (ANFIS) Controller [Volume 28, Issue 3, 2015, Pages 396-401]
-
Moghadamnia, A.
Separation of Curcumin from Curcuma longa L. and its Conjugation with Silica Nanoparticles for Anti-cancer Activities [Volume 31, Issue 11, 2018, Pages 1803-1809]
-
Moghadamnia, A. A.
Subcritical Water Extraction of Bioactive Compounds from Ginger (Zingiber officinale Roscoe) [Volume 31, Issue 12, 2018, Pages 1991-2000]
-
Moghadamnia, Ali Akbar
Microwave Ultrasound Assisted Extraction: Determination of Quercetin for Antibacterial and Antioxidant Activities of Iranian Propolis [Volume 32, Issue 8, 2019, Pages 1057-1064]
-
Moghadamnia, Ali Akbar
Chemical Composition, Antibacterial and Analgesic Activity of Lavandula stoechas Flowers from North of Iran [Volume 32, Issue 8, 2019, Pages 1065-1073]
-
Moghadamnia, Ali Akbar
Sequential Microwave-assisted Extraction for Isolation of Quercetin from Red Kidney Bean [Volume 33, Issue 1, 2020, Pages 12-17]
-
Moghadas Nejad, F.
Non Linear Finite Element Analysis of Reinforced and Unreinforeced Pavements [Volume 17, Issue 3, 2004, Pages 213-226]
-
Moghadassi, Abdolreza
Preparation of Polyvinylchloride Nanofiltration Membrane: Investigation the Effect of Thickness, Prior Evaporation Time and Addition Polyethylenglchol as Additive on Membrane Performance and Properties [Volume 29, Issue 3, 2016, Pages 280-287]
-
Moghadassi, Abdolreza
Fabrication and Characterization of Novel Mixed Matrix Polyethersulfone Based Nanofiltration Membrane Modified by Ilmenite (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 7-14]
-
Moghadassi, Abdolreza
Incorporated Poly Acrylic Acid-co-Fe3O4 Nanoparticles Mixed Matrix Polyethersulfone based Nanofiltration Membrane in Desalination Process [Volume 30, Issue 6, 2017, Pages 821-829]
-
Moghadassi, A. R.
Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance [Volume 31, Issue 10, 2018, Pages 1609-1616]
-
Moghaddasie, B.
Some Geometrical Bases for Incremental-Iterative Methods (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 245-256]
-
Moghaddas Tafreshi, S. N.
Soil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions [Volume 15, Issue 2, 2002, Pages 117-124]
-
Moghassem, Abdolrasool
Study on the Damaging of Dyed Cotton Fibers with Direct Dye in Spinning Processes and its Effect on the Properties of Cotton Mélange Yarn [Volume 20, Issue 2, 2007, Pages 203-210]
-
Moghassem, Abdolrasool
Evaluating Pile Yarn Characteristics in Hand Woven Carpet using Stress-Strain Behavior in Compression [Volume 21, Issue 3, 2008, Pages 303-312]
-
Moghassem, Abdolrasool
Redistribution of Fibers in the Structure of Hollow Ring Spun Yarn [Volume 22, Issue 2, 2009, Pages 197-204]
-
Moghavvemi, M.
Pic Microcontroller-Based Automatic Meter Reading (AMR) System Using the Low Voltage (LV) Power Line Network (TECHNICAL NOTE) [Volume 18, Issue 1, 2005, Pages 39-50]
-
Moghavvemi, M.
A Reliable and Economically Feasible Automatic Meter Reading System Using Power Line Distribution Network (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 301-318]
-
Mogheyse, AmirHamze
Effective Design of a 3×4 Two Dimensional Distributed Amplifier Based on Gate Line Considerations [Volume 30, Issue 6, 2017, Pages 830-838]
-
Moghiman, M.
Thermal Analysis of Shell-Side Flow of Shell-and-Tube Heat Exchanger Using Experimental and Theoretical Methods [Volume 13, Issue 1, 2000, Pages 15-26]
-
Moghiman, M.
Measurements and Modeling of Flue Height Influence on Air Pollution Emissions and Thermal Efficiency of Natural Draught Gas Fired Boilers [Volume 15, Issue 3, 2002, Pages 273-284]
-
Moghiman, M.
Modeling of the Combustion Oscillations and Soot Formation in Aerovalved Pulse Combustors [Volume 16, Issue 3, 2003, Pages 293-306]
-
Moghimi, Hamid Reza
Analytic Network Process Based Strategic Planning for Iran's Trade Promotion Organization [Volume 27, Issue 8, 2014, Pages 1215-1222]
-
Moghimi, S. M.
Effect of Non-uniform Magnetic Field on Non-newtonian Fluid Separation in a Diffuser [Volume 33, Issue 7, 2020, Pages 1354-1363]
-
Moghtadaei, H.
Determination of Blast Impact Range and Safe Distance for a Reinforced Concrete Pile Under Blast Loading [Volume 36, Issue 2, 2023, Pages 384-397]
-
Moghtaderi Esfahani, Amir
Analysis of Structural Vibrations due to Passage of Underground Trains [Volume 29, Issue 6, 2016, Pages 742-751]
-
Mohadess Deylami, Hamed
Flow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach [Volume 26, Issue 7, 2013, Pages 761-770]
-
Mohadess Deylami, Hamed
Numerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel [Volume 26, Issue 7, 2013, Pages 771-780]
-
Mohaghegh, S. D.
An Intelligent System’s Approach for Revitalization of Brown Fields using only Production Rate Data [Volume 22, Issue 1, 2009, Pages 89-106]
-
Mohagheghi, V.
Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
-
Mohagheghian, Azita
Photochemical Degradation of 2,4-dichlorophenol in Aqueous Solutions by Fe2+/ Peroxydisulfate/ UV Process [Volume 30, Issue 1, 2017, Pages 15-22]
-
Mohagheghian, Iman
A Particle Swarm Optimization Algorithm for Mixed-Variable Nonlinear Problems [Volume 24, Issue 1, 2011, Pages 65-78]
-
Mohagheghpour, E.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Mohajerani, Amirhossein
NUMERICAL INVESTIGATION OF CRACK ORIENTATION IN THE FRETTING FATIGUE OF A FLAT ROUNDED CONTACT [Volume 23, Issue 3, 2010, Pages 223-232]
-
Mohajeri, A.
A New Mathematical Model To Optimize A Green Gas Network: A Case Study [Volume 30, Issue 7, 2017, Pages 1029-1037]
-
Mohajeri, Amir
An Interactive Allocation for Depot-Customer-Depot in a Multi Aspect Supply Chain Network [Volume 24, Issue 4, 2011, Pages 367-376]
-
Mohajeri, Amir
OPTIMIZATION OF TREE-STRUCTURED GAS DISTRIBUTION NETWORK USING ANT COLONY OPTIMIZATION: A CASE STUDY [Volume 25, Issue 2, 2012, Pages 141-158]
-
Mohajeri, Seyed Hossein
On Coherent Structures of Turbulent Open-channel Flow Above a Rough Bed [Volume 29, Issue 11, 2016, Pages 1520-1529]
-
Mohajeri Khameneh, Pedram
NUMERICAL SIMULATION OF EFFECTS OF NON-IONIZED MASS INJECTION ON THE MHD FLOW IN A CIRCULAR CHANNEL [Volume 25, Issue 1, 2012, Pages 71-78]
-
Mohajeri Khameneh, Pedram
A NUMERICAL STUDY OF SINGLE-PHASE FORCED CONVECTIVE HEAT TRANSFER WITH FLOW FRICTION IN MICROCHANNELS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 79-88]
-
Mohamad, D.
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Mohamad, D.
Influence of Project and Affected Local Community Interests Level on Social Conflicts in Indonesian Infrastructure Projects [Volume 35, Issue 7, 2022, Pages 1217-1226]
-
Mohamad, Dadang
Strengthening the Standardisation of Professional Engineering Competencies to Support Sustainable Construction Through Circular Economy Principles in Indonesia [(Articles in Press)]
-
Mohamad, M
Synthesis and Characterization of CaO-TiO2 for Transesterification of Vegetable Palm Oil [Volume 31, Issue 8, 2018, Pages 1326-1333]
-
Mohamadi, Sedigheh
Desorption Kinetics of Heavy Metals (Lead, Zinc, and Nickel) Coexisted with Phenanthrene from a Natural High Buffering Soil [Volume 32, Issue 12, 2019, Pages 1716-1725]
-
Mohamadi Dehcheshmeh, M.
Structural Damage Assessment via Model Updating Using Augmented Grey Wolf Optimization Algorithm [Volume 33, Issue 7, 2020, Pages 1173-1182]
-
Mohamadiyan, J.
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
-
Mohamadreza, Mohammad Mehralian
Removal of Fe2+ from Aqueous Solution Using Manganese Oxide Coated Zeolite and Iron Oxide Coated Zeolite [Volume 29, Issue 11, 2016, Pages 1587-1594]
-
Mohamadzadeh, S.
Estimation of Hand Skeletal Postures by Using Deep Convolutional Neural Networks [Volume 33, Issue 4, 2020, Pages 552-559]
-
Mohamadzadeh, S.
Image Edge Detection with Fuzzy Ant Colony Optimization Algorithm [Volume 33, Issue 12, 2020, Pages 2464-2470]
-
Mohamadzadeh, S.
Segmenting the Lesion Area of Brain Tumor using Convolutional Neural Networks and Fuzzy K-Means Clustering [Volume 36, Issue 8, 2023, Pages 1556-1568]
-
Mohamadzadeh, S.
Deep Multi-task Convolutional Neural Networks for Efficient Classification of Face Attributes [Volume 36, Issue 11, 2023, Pages 2102-2111]
-
Mohamadzadeh, S.
Algorithm of Predicting Heart Attack with using Sparse Coder [Volume 36, Issue 12, 2023, Pages 2190-2197]
-
Mohamadzadeh, S.
Semantic Segmentation of Aerial Imagery: A Novel Approach Leveraging Hierarchical Multi-scale Features and Channel-based Attention for Drone Applications [Volume 37, Issue 5, 2024, Pages 1022-1035]
-
Mohamadzadeh, Sajad
A Modified Grasshopper Optimization Algorithm Combined with CNN for Content Based Image Retrieval [Volume 32, Issue 7, 2019, Pages 924-930]
-
Mohamed, A.
Fuzzy Logic Control of Maximum Power Point Tracking Controller in an Autonomous Hybrid Power Generation System by Extended Kalman Filter for Battery State of Charge Estimation [Volume 36, Issue 2, 2023, Pages 199-214]
-
Mohamed, A. R.
Performance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors [Volume 17, Issue 2, 2004, Pages 105-120]
-
Mohamed, A. R.
Pretreated Palm Oil Mill Effluent (POME) Digestion in an Up-Flow Anaerobic Sludge Fixed Film Bioreactor: a Comparative Study [Volume 19, Issue 1, 2006, Pages 1-9]
-
Mohamed, A. R.
Effect of Organic Substrate on Promoting Solventogenesis in Ethanologenic Acetogene Clostridium ljungdahlii ATCC5538 [Volume 27, Issue 2, 2014, Pages 185-194]
-
Mohamed, K.
Fuzzy Logic Control of Maximum Power Point Tracking Controller in an Autonomous Hybrid Power Generation System by Extended Kalman Filter for Battery State of Charge Estimation [Volume 36, Issue 2, 2023, Pages 199-214]
-
Mohamed Kutty, S. Rahman
Equilibrium and Kinetic Studies on Lead (II) Adsorption by Sugarcane Bagasse Derived Activated Carbon (TECHNICAL NOTE) [Volume 30, Issue 11, 2017, Pages 1647-1653]
-
Mohamed Nazri, F.
Assessment of Structure-Specific Fragility Curves for Soft Storey Buildings Implementing IDA and SPO Approaches [Volume 31, Issue 12, 2018, Pages 2016-2021]
-
Mohamed Shaharoun, Awaludin
Fixture Design Automation and Optimization Techniques: Review and Future Trends [Volume 27, Issue 11, 2014, Pages 1787-1794]
-
Mohamed Zahari, M. A
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Mohammad, A. W
Influence of Particle Size and Pressure Drop in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent [Volume 31, Issue 8, 2018, Pages 1437-1445]
-
Mohammad-Alizadeh, Hasan
Improvement of Iranian Seismic Design Code Considering the Near-Fault Effects [Volume 25, Issue 2, 2012, Pages 147-158]
-
Mohammadbagher, A.
Multi-Objective Vehicle Routing Problem for a Mixed Fleet of Electric and Conventional Vehicles with Time Windows and Recharging Stations [Volume 35, Issue 12, 2022, Pages 2359-2369]
-
Mohammadhassani, F.
Control of a Single Stage Boost Inverter Based on Dynamic Sliding Mode Control with Power Decoupling [Volume 33, Issue 10, 2020, Pages 1978-1985]
-
Mohammadi, A
Analysis and Evaluation of Privacy Protection Behavior and Information Disclosure Concerns in Online Social Networks [Volume 31, Issue 8, 2018, Pages 1234-1239]
-
Mohammadi, A
Analyzing Tools and Algorithms for Privacy Protection and Data Security in Social Networks [Volume 31, Issue 8, 2018, Pages 1267-1273]
-
Mohammadi, G.
Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
-
Mohammadi, H.
A new Approach Versus Benders Decomposition in Aggregate Production Planning [Volume 14, Issue 4, 2001, Pages 351-360]
-
Mohammadi, H.
Behavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets [Volume 20, Issue 1, 2007, Pages 49-58]
-
Mohammadi, H. R.
Neural Network Implementation of a Three Phase Regulated PWM AC to Dc Convener with Input Unbalance Correction [Volume 9, Issue 3, 1996, Pages 151-158]
-
Mohammadi, Karim
On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
-
Mohammadi, M
Optimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation [Volume 31, Issue 2, 2018, Pages 299-306]
-
Mohammadi, M.
Shape Effects and Definition of Hydraulic Radius in Manning 's Equation in Open Channel Flow [Volume 10, Issue 3, 1997, Pages 127-142]
-
Mohammadi, M.
An Experimental Investigation of Bridgeflow II Kerb Channel Units [Volume 15, Issue 1, 2002, Pages 23-40]
-
Mohammadi, M.
Resistance to Flow in a V-Shaped Bottom Channel [Volume 17, Issue 4, 2004, Pages 341-350]
-
Mohammadi, M.
Spatially Varied Flow Profiles in a V-Shaped Side-Channel [Volume 18, Issue 4, 2005, Pages 391-400]
-
Mohammadi, M.
Local and Global Friction Factor in a Channel with V-Shaped Bottom [Volume 21, Issue 4, 2008, Pages 325-336]
-
Mohammadi, M.
Buckling Analysis of Thin Functionally Graded Rectangular Plates with two Opposite Edges Simply Supported [Volume 23, Issue 2, 2010, Pages 179-192]
-
Mohammadi, M.
A Scheduling Model of Flexible Manufacturing System to Reduce Waste and Earliness/Tardiness Penalties [Volume 30, Issue 5, 2017, Pages 749-757]
-
Mohammadi, M.
Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
-
Mohammadi, M.
Separation of Curcumin from Curcuma longa L. and its Conjugation with Silica Nanoparticles for Anti-cancer Activities [Volume 31, Issue 11, 2018, Pages 1803-1809]
-
Mohammadi, M.
Subcritical Water Extraction of Bioactive Compounds from Ginger (Zingiber officinale Roscoe) [Volume 31, Issue 12, 2018, Pages 1991-2000]
-
Mohammadi, M.
Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading [Volume 32, Issue 6, 2019, Pages 872-876]
-
Mohammadi, M.
Gait Recognition based on Measurements of Moving Human Legs Angles [Volume 33, Issue 5, 2020, Pages 975-983]
-
Mohammadi, M.
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Mohammadi, M.
Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
-
Mohammadi, M.
A Novel Approach to Modular Control of Highway and Arterial Networks using Petri Nets Modeling [Volume 36, Issue 8, 2023, Pages 1578-1588]
-
Mohammadi, M.
A Model for Analysis of Social Media in Adoption of Mobile Banking [Volume 37, Issue 7, 2024, Pages 1384-1394]
-
Mohammadi, M.
Flexible Job Shop Scheduling Problem Considering Upper Bounds for the Amount of Interruptions Between Operations and Machines Maintenance Activities [Volume 37, Issue 8, 2024, Pages 1600-1614]
-
Mohammadi, Maedeh
Recovery of Methyl Acetoacetate from Antibiotic Production Plant\'s Waste Streams (TECHNICAL NOTE) [Volume 22, Issue 2, 2009, Pages 123-129]
-
Mohammadi, Maedeh
Effect of Organic Substrate on Promoting Solventogenesis in Ethanologenic Acetogene Clostridium ljungdahlii ATCC5538 [Volume 27, Issue 2, 2014, Pages 185-194]
-
Mohammadi, Maedeh
Catalytic Effect of Metal Species on Enhancement of CO2 Gasification Reactivity of Biomass Char [Volume 28, Issue 9, 2015, Pages 1251-1256]
-
Mohammadi, Maedeh
Production of Single Cell Protein from Sugarcane Bagasse by Saccharomyces cerevisiae in Tray Bioreactor [Volume 29, Issue 8, 2016, Pages 1029-1036]
-
Mohammadi, Maedeh
Microwave Ultrasound Assisted Extraction: Determination of Quercetin for Antibacterial and Antioxidant Activities of Iranian Propolis [Volume 32, Issue 8, 2019, Pages 1057-1064]
-
Mohammadi, Mehrdad
Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
-
Mohammadi, Mirali
Boundary Shear Stress in a Trapezoidal Channel [Volume 25, Issue 4, 2012, Pages 323-332]
-
Mohammadi, Mirali
An ANFIS-based Approach for Predicting the Manning Roughness Coefficient in Alluvial Channels at the Bank-full Stage [Volume 26, Issue 2, 2013, Pages 177-186]
-
Mohammadi, Mirali
Optimal Design and Benefit/Cost Analysis of Reservoir Dams by Genetic Algorithms Case Study: Sonateh Dam, Kordistan Province, Iran [Volume 29, Issue 4, 2016, Pages 482-489]
-
Mohammadi, Mohammad
Optimizing Flexible Manufacturing System: A Developed Computer Simulation Model [Volume 29, Issue 8, 2016, Pages 1112-1119]
-
Mohammadi, Mohammad
Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
-
Mohammadi, Mohammad
Presenting effective methods in the classification of echocardiographic views using deep learning [(Articles in Press)]
-
Mohammadi, Mohammad Reza
A Numerical Study on Aluminum Plate Response under Low Velocity Impact [Volume 30, Issue 3, 2017, Pages 439-447]
-
Mohammadi, Mousa
Improving Performance of Mining Equipment Through Enhancement of Speed Factor: A Case Study (Research Note) [Volume 28, Issue 9, 2015, Pages 1392-1400]
-
Mohammadi, S.
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Mohammadi, S.
Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
-
Mohammadi, S.
Exploring Factors Influencing Cryptocurrency Adoption: A Comprehensive Modeling Based on Fuzzy Cognitive Maps Approach [Volume 36, Issue 11, 2023, Pages 2073-2086]
-
Mohammadi, Seyed Erfan
Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
-
Mohammadi, Y.
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Mohammadi, Y.
Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
-
Mohammadi, Y.
Utilization of Steel Micro-fiber and Carbon Nanotubes in Self-compacting Lightweight Concrete [Volume 36, Issue 5, 2023, Pages 955-964]
-
Mohammadi Aghdam, K
Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
-
Mohammadi Ajamloo, A.
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Mohammadian, E.
Seismic Response of the Kavar Concrete Face Rockfill Dam (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 333-346]
-
Mohammadian, M.
Scheduling Nurse Shifts Using Goal Programming Based on Nurse Preferences: A Case Study in an Emergency Department [Volume 32, Issue 7, 2019, Pages 954-963]
-
Mohammadian, Mostafa
Young s Modulus of Single and Double Walled Carbon Nanocones Using Finite Element Method(TECHNICAL NOTE) [Volume 27, Issue 9, 2014, Pages 1467-1474]
-
Mohammadian, Zahra
Numerical Investigation on the Effect of Mold Design on Shrinkage of Sand Casted Multistage BB3-6×6 Pump Casing (RESEARCH NOTE) [Volume 29, Issue 8, 2016, Pages 1175-1182]
-
Mohammadian KhalafAnsara, H.
Deep Reinforcement Learning with Immersion- and Invariance-based State Observer Control of Wave Energy Converters [Volume 37, Issue 6, 2024, Pages 1085-1097]
-
Mohammadi Ardehali, Reza
Modeling of TiO2-water Nanofluid Effect on Heat Transfer and Pressure Drop [Volume 27, Issue 2, 2014, Pages 195-202]
-
Mohammadi Arhani, Mohammad Reza
Reverse Engineering for Designing the Coupling of a 32 MW Rotor-generator by Shrink Fitting Method (TECHNICAL NOTE) [Volume 28, Issue 9, 2015, Pages 1375-1382]
-
Mohammadi Daniali, H.
Experimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator [Volume 32, Issue 1, 2019, Pages 71-77]
-
Mohammadi Kosha, A.
Dual-Fuelling of a Direct-Injection Automotive Diesel Engine by Diesel-Gas Method [Volume 5, Issue 3, 1992, Pages 129-136]
-
Mohammadi Kousha, A.
A New Strategy for Reduction of Emissions and Enhancement of Performance Characteristics of Dual Fuel Engines at Part Loads [Volume 23, Issue 1, 2010, Pages 87-104]
-
Mohammadimehr, Mehdi
Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
-
Mohammadipour, P.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Mohammaditabar, D
Cooperative Benefit and Cost Games under Fairness Concerns [Volume 31, Issue 8, 2018, Pages 1250-1257]
-
Mohammadiun, mohammad
Estimation of the Strength of the Time-dependent Heat Source using Temperature Distribution at a Point in a Three Layer System [Volume 25, Issue 4, 2012, Pages 389-398]
-
Mohammadiyan, H.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Mohammadizad, P.
Modeling and Performance Evaluation of Energy Consumption in S-MAC Protocol Using Generalized Stochastic Petri Nets [Volume 33, Issue 6, 2020, Pages 1114-1121]
-
Mohammadizadeh, M.
Effect of Carbon Nanotube and Surfactant on Processing, Mechanical, Electrical and EMI-Shielding of Epoxy Composites [Volume 31, Issue 11, 2018, Pages 1810-1815]
-
Mohammadizadeh, Mahdi
Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
-
Mohammadjani, A.
A Multiple Kernel Learning based Model with Clustered Features for Cancer Stage Detection using Gene Datasets [Volume 36, Issue 11, 2023, Pages 2028-2037]
-
Mohammad-Karimi, N.
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
-
Mohammadkhani, F.
Thermodynamic Analysis of New Cogeneration Cycle Based on Gaynarje Hotspring [Volume 33, Issue 6, 2020, Pages 1149-1155]
-
Mohammadkhani, Farzad
A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System [Volume 28, Issue 4, 2015, Pages 608-617]
-
Mohammadkhani, Farzad
Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints [Volume 28, Issue 4, 2015, Pages 618-626]
-
Mohammadkhani, Farzad
Thermodynamic Analysis and Optimization of a Novel Cogeneration System: Combination of a gas Turbine with Supercritical CO2 and Organic Rankine Cycles (TECHNICAL NOTE) [Volume 29, Issue 12, 2016, Pages 1765-1774]
-
Mohammadkhani, Farzad
Thermodynamic Analysis and Optimization of a Novel Cogeneration System: Combination of a gas Turbine with Supercritical CO2 and Organic Rankine Cycles (TECHNICAL NOTE) [Volume 29, Issue 12, 2016, Pages 1765-1774]
-
Mohammadkhani, Reza
Modification of Sidelobe Canceller System In Planar Arrays (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 13-20]
-
Mohammadkhanloo, Mohammad
A Clustering Based Location-allocation Problem Considering Transportation Costs and Statistical Properties (RESEARCH NOTE) [Volume 26, Issue 6, 2013, Pages 597-604]
-
Mohammadnezhad, H.
A New Optimal Distributed Strategy to Mitigate the Phase Imbalance in Smart Grids [Volume 33, Issue 12, 2020, Pages 2489-2495]
-
Mohammadnia, Ali
More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
-
Mohammadpoor, Mojtaba
Secured Route Optimization and Micro-mobility with Enhanced Handover Scheme in Mobile IPv6 Networks [Volume 29, Issue 11, 2016, Pages 1530-1538]
-
MOHAMMADPOORY, ZEINAB
Speech Enhancement using Laplacian Mixture Model under Signal Presence Uncertainty [Volume 27, Issue 9, 2014, Pages 1367-1376]
-
Mohammad Taheri, M.
Self-Equalized Distributed Amplifier for Wide Band Optical Transceivers [Volume 17, Issue 3, 2004, Pages 263-268]
-
Mohammad Taheri, M.
Ultra-Widband Distributed Amplifier Using Loss Compensation Technique on Both Input and Output Circuit [Volume 17, Issue 4, 2004, Pages 377-386]
-
Mohammadzade, Hadi
Hotel Location Problem Using Erlang Queuing Model under Uncertainty (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1879-1887]
-
Mohammadzade, M.
A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
-
Mohammadzadeh, A.
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Mohammadzadeh, H.
New Approaches in Metaheuristics to Solve the Truck Scheduling Problem in a Cross-docking Center [Volume 31, Issue 8, 2018, Pages 1258-1266]
-
Mohammadzadeh, M.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Mohammadzadeh, M.
Experimental Investigation and Thermodynamic Modeling of Zn+2 and Ni+2 Extraction from Zn Plant Residue using D2EHPA [Volume 36, Issue 11, 2023, Pages 2015-2027]
-
Mohammadzadeh, M.
Performance Evaluating Energy, Economic and Environmental Performance with an Integrated Approach of Data Envelopment Analysis and Game Theory [Volume 37, Issue 5, 2024, Pages 959-973]
-
Mohammad-Zadeh Bahar, M.
Compositional Modeling of Wax Formation in Petroleum Mixtures [Volume 14, Issue 4, 2001, Pages 303-312]
-
Mohammadzadeh Bazarchi, S.
Design and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations [Volume 31, Issue 11, 2018, Pages 1883-1892]
-
Mohammad Zaheri, F.
Numerical and Experimental Study of Ballistic Response of Kevlar Fabric and Kevlar/Epoxy Composite [Volume 30, Issue 5, 2017, Pages 791-799]
-
Mohammdpour Mir, M.
Predicting the Coefficients of Antoine Equation Using the Artificial Neural Network (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1353-1357]
-
Mohammed, Abbas H.
Experimental Study on Performance of Fiber Concrete-filled Tube Columns under Axial Loading [Volume 32, Issue 12, 2019, Pages 1726-1732]
-
Mohammed, A. S.
An Experimental Study to Predict a New Formula for Calculating the Deflection in Wide Concrete Beams Reinforced with Shear Steel Plates [Volume 36, Issue 2, 2023, Pages 360-371]
-
Mohammed, D. H.
Experimental and Numerical Investigation of the Impact of Basalt Fibers and Tie Spacing on Short Concrete Column Behavior [Volume 36, Issue 7, 2023, Pages 1287-1299]
-
Mohammed, D. H.
A Numerical Study to Investigate Shear Behavior of High-strength Concrete Beams Externally Retrofitted with Carbon Fiber Reinforced Polymer Sheets [Volume 36, Issue 11, 2023, Pages 2112-2123]
-
Mohammed, T. A.
Static and Dynamic Behavior of High-strength Lightweight Reinforced Concrete One-way Ribbed Slabs [Volume 35, Issue 4, 2022, Pages 732-739]
-
Mohammed, T. J.
Enhancement of the Shear-flexural Strength of the Rubberized Concrete Prism Beam by External Reinforcement [Volume 35, Issue 5, 2022, Pages 1017-1023]
-
Mohammedali, Taha K.
Experimental Study on Performance of Fiber Concrete-filled Tube Columns under Axial Loading [Volume 32, Issue 12, 2019, Pages 1726-1732]
-
Mohammed Naji, T.
Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2 [Volume 37, Issue 1, 2024, Pages 178-186]
-
Mohammed-Noor Khudhur, H.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Mohan, S. C.
Seismic Response of Building Structures with Sliding Non-structural Elements [Volume 33, Issue 2, 2020, Pages 205-212]
-
Mohan, S. C.
Experiments on Coupled Technique for Adjacent Similar Buildings [Volume 33, Issue 9, 2020, Pages 1703-1709]
-
Moharrami, Ali
Failure Probability and Remaining Life Assessment of Reheater Tubes [Volume 26, Issue 5, 2013, Pages 543-552]
-
Mohd Alic, A. A.
A Light Solution for Device Diversity Problem in a Wireless Local Area Network Fingerprint Indoor Positioning System [Volume 36, Issue 4, 2023, Pages 649-658]
-
Mohd Umair, S.
On Numerical Investigation of Semi-empirical Relations Representing Local Nusselt Number at Lower Nozzle-target Spacing’s [Volume 32, Issue 1, 2019, Pages 137-145]
-
Mohebbi, Mohebbat
Kinetics of Reshteh Khoshkar Color Changes During Atmospheric and Vacuum Deep-fat Frying [Volume 29, Issue 12, 2016, Pages 1670-1676]
-
Mohebi, M.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Mohebkhah, Amin
Seismic Behavior of Direct Displacement-based Designed Eccentrically Braced Frames [Volume 29, Issue 6, 2016, Pages 752-761]
-
Mohseni, E.
Experimental Evaluation of Surface Alterations Induced in Machining of Ti-6Al-4V Alloy [Volume 33, Issue 3, 2020, Pages 486-493]
-
Mohseni, H.
A Fast Method for Calculation of Transformers Leakage Reactance Using Energy Technique [Volume 16, Issue 1, 2003, Pages 41-48]
-
Mohseni, M.
Integrator Backstepping Control of a 5 DoF Robot Manipulator with Cascaded Dynamics [Volume 16, Issue 4, 2003, Pages 373-383]
-
Mohseni, N.
Outlier Detection in Test Samples using Standard Deviation and Unsupervised Training Set Selection [Volume 36, Issue 1, 2023, Pages 119-129]
-
Mohsenzadeh, M.
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Mohsenzadeh, S.
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Mohsenzadeh, Sajjad
Experimental and Numerical Study of Energy Absorption Capacity of Glass Reinforced SCC Beams [Volume 32, Issue 12, 2019, Pages 1733-1744]
-
MohsenzadehLedari, A
Optimal Decisions in a Dual-channel Supply Chain for the Substitute Products with the Special Orders under DisruptionRisk and Brand Consideration [Volume 31, Issue 5, 2018, Pages 759-769]
-
Mohsin, M. S.
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
Mohtadi-Bonab, M. A.
Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
-
Mojallali, H.
An Optimized PID for Capsubots using Modified Chaotic Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1377-1384]
-
Mojaver, M.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Mojaver, P.
Thermodynamic Investigation and Optimization of a Power Generation System Based Solid Oxide Fuel Cell Using Taguchi Approach [Volume 32, Issue 7, 2019, Pages 1040-1048]
-
Mojtabavi, Pedram
Flow Re-Stabilizing Observation via Air Injection during the Rotating Stall through a Single-stage Axial Compressor by a 2-D Finite-volume Approach [Volume 26, Issue 7, 2013, Pages 761-770]
-
Mokhtar, N
Total Phenolic Content, Total Flavonoid Content and Radical Scavenging Activity from Zingiber zerumbet Rhizome using Subcritical Water Extraction [Volume 31, Issue 8, 2018, Pages 1421-1429]
-
Mokhtar, Norehan
Hierarchical Deep Learning Model for Tooth Classification in Intra-Oral Dental Photographs [(Articles in Press)]
-
Mokhtari, A.
A New Multi-Valued Logic Buffer and Inverter Using MOSFET Based Differential Amplifier [Volume 35, Issue 1, 2022, Pages 150-160]
-
Mokhtari, Ghasem
Simultaneous Due Date Assignment and Lot Sizing with Uncertain Flow Times [Volume 20, Issue 3, 2007, Pages 263-280]
-
Mokhtari, H.
A Multi-product Humanitarian Supply Chain Network Design Problem: A Fuzzy Multi-objective and Robust Optimization Approach [Volume 37, Issue 5, 2024, Pages 941-958]
-
Mokhtari, Hadi
A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
-
Mokhtari, Hadi
A Reliability based Modelling and Optimization of an Integrated Production and Preventive Maintenance Activities in Flowshop Scheduling Problem [Volume 28, Issue 12, 2015, Pages 1774-1781]
-
Mokhtari, Hadi
A Single Machine Capacitated Production Planning Problem Under Uncertainty: A Grey Linear Programming Approach [Volume 29, Issue 4, 2016, Pages 524-529]
-
Mokhtari, Hadi
Fitting the Three-parameter Weibull Distribution by using Greedy Randomized Adaptive Search Procedure [Volume 30, Issue 3, 2017, Pages 424-431]
-
Mokhtari, M.
Effects of Xanthan Gum and Lime on Physical Properties and Mechanical Behavior of Organic Soil [Volume 36, Issue 10, 2023, Pages 1758-1772]
-
Mokhtari, Maryam
Experimental Investigation and Modeling of the Dynamic Properties of slag Ballast and Limestone Ballast [(Articles in Press)]
-
Mokhtarzade, M.
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Mokhtarzade, M.
Ensemble of Log-Euclidean Kernel SVM based on Covariance Descriptors of Multiscale Gabor Features for Face Recognition [Volume 35, Issue 11, 2022, Pages 2065-2071]
-
Mokhtarzade, M.
Land Covers Classification from LiDAR-DSM Data Based on Local Kernel Matrix Features of Morphological Profiles [Volume 36, Issue 9, 2023, Pages 1611-1617]
-
Mokmeli, M.
Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
-
Mokmeli, M.
Full Characterization of Sarcheshmeh and Khatoon-Abad Copper Anode Slimes: Characterization Impact on the Decopperization Operation [Volume 36, Issue 5, 2023, Pages 934-945]
-
Mola-Abasia, H.
Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
-
Molaei, M.
Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
-
Molaei, M.J.
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Molani Aghdam, M.
Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
-
Molavi, Hoda
An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
-
Molavi-Kakhki, M.
A Blind Hammerstein Diversity Combining Technique for Flat Fading Channels [Volume 26, Issue 3, 2013, Pages 277-288]
-
Molki, Majid
Average Heat Transfer Coefficient in Rectangular Ducts with Baffle Blockages [Volume 1, Issue 4, 1988, Pages 211-218]
-
Molki, Majid
Enhancement of Natural Convection Heat Transfer in Annular Enclosures [Volume 2, Issue 1, 1989, Pages 45-54]
-
Molki, Majid
An Experiment study concerning Natural convection frome a Horizontal Thin wire [Volume 3, Issue 3, 1990, Pages 154-162]
-
Molki, Majid
Local Heat Transfer Coefficients in a Rectangular Duct with Plate Blockages of Variable Stream Wise Spacing [Volume 7, Issue 1, 1994, Pages 33-40]
-
Molki, Majid
Natural Convection from a Helical Heating Coil to the Surrounding Fluid. [Volume 9, Issue 1, 1996, Pages 29-36]
-
Molki, Majid
Thermal Field Around a Circular Cylinder with Periodic Vortex Shedding [Volume 10, Issue 1, 1997, Pages 27-36]
-
Mollaalipour, Mohammad
Analytic Approach to Investigation of Fluctuation and Frequency of the Oscillators with Odd and Even Nonlinearities [Volume 23, Issue 1, 2010, Pages 41-56]
-
Molla-Alizadeh, Saber
A Reliability based Modelling and Optimization of an Integrated Production and Preventive Maintenance Activities in Flowshop Scheduling Problem [Volume 28, Issue 12, 2015, Pages 1774-1781]
-
Mollaei, H. R
A New Multi-objective Model for Multi-mode Project Planning with Risk [Volume 31, Issue 5, 2018, Pages 770-779]
-
Mollaei, S.
Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures [Volume 36, Issue 3, 2023, Pages 594-603]
-
Mollahosseini, Afsaneh
Desorption Kinetics of Heavy Metals (Lead, Zinc, and Nickel) Coexisted with Phenanthrene from a Natural High Buffering Soil [Volume 32, Issue 12, 2019, Pages 1716-1725]
-
Mollaie, Yasser
Dynamic Response Analysis of the Planar and Tubular Solid Oxide Fuel Cells to the Inlet Air Mass Flow Rate Variation [Volume 28, Issue 5, 2015, Pages 794-801]
-
Mollaverdi-Esfahani, Naser
Introducing the Time Value of Money in a Non-consignment Vendor Managed Inventory Model [Volume 29, Issue 5, 2016, Pages 637-645]
-
Mollayi, N.
A Non-destructive Ultrasonic Testing Approach for Measurement and Modelling of Tensile Strength in Rubbers [Volume 33, Issue 12, 2020, Pages 2549-2555]
-
Mollazadeh Beidokhti, S.
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction [Volume 35, Issue 1, 2022, Pages 220-227]
-
Molyneux, D.
Numerical Hydrodynamic Performance of the Stepped Planing Craft and Its Step Height Effect (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 602-607]
-
Momayez, A.
Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials [Volume 15, Issue 4, 2002, Pages 319-332]
-
Momeni, A.
Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
-
Momeni, H.R.
Designing a Home Security System using Sensor Data Fusion with DST and DSMT Methods [Volume 22, Issue 1, 2009, Pages 13-20]
-
Momeni, M.
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
-
Momeni, M.
Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
-
Momeni, Mahboubeh
Microstructure and Grain Refining Performance of a New Al-Ti-C Master Alloy (RESEARCH NOTE) [Volume 26, Issue 7, 2013, Pages 701-706]
-
Momeni, Mojtaba
Inhibitive Assesment of Stearamide as a Corrosion Inhibitor for Mild Steel in HCl Solution [Volume 25, Issue 2, 2012, Pages 119-126]
-
Momenipour, Mehran
Three Different Methods for Approximate Analysis of Bar Structures [Volume 33, Issue 1, 2020, Pages 47-54]
-
Momeni Roghabadi, M.
Plastic Properties and Collapse Investigation of Fine-grained Soil Rehabilitated with Styrene Butadiene Rubber: A Case Study in Kerman, Iran [Volume 36, Issue 10, 2023, Pages 1746-1757]
-
Momin, A. A.
An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
-
Momin, A. I. A
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Momin, A. I. A.
Stress-Strain Characteristics of Reactive Powder Concrete Under Cyclic Loading [Volume 35, Issue 1, 2022, Pages 172-183]
-
Momtahen, S.
Drug Discovery Acceleration Using Digital Microfluidic Biochip Architecture and Computer-aided-design Flow [Volume 32, Issue 8, 2019, Pages 1169-1176]
-
Monadi, Mohsen
Optimal Design and Benefit/Cost Analysis of Reservoir Dams by Genetic Algorithms Case Study: Sonateh Dam, Kordistan Province, Iran [Volume 29, Issue 4, 2016, Pages 482-489]
-
Mondal, Pranab
An Analytical Approach to the Effect of Viscous Dissipation on Shear-Driven Flow between two parallel plates with Constant Heat Flux Boundary Conditions [Volume 26, Issue 5, 2013, Pages 533-542]
-
Monfared, V.
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Moniri, A
Simultaneous Pricing, Routing, and Inventory Control for Perishable Goods in a Two-echelon Supply Chain [Volume 31, Issue 7, 2018, Pages 1074-1081]
-
Monjazi, M.
Push Back Design in Two-element Deposits Incorporating Grade Uncertainty (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1279-1287]
-
Monsef Ahmad, H.
Experimental and Numerical Study of Perforated Steel Plate Shear Panels [Volume 33, Issue 4, 2020, Pages 520-529]
-
Montaseri, Majid
Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
-
Montazer, G.A.
A New Approach for Knowledge Based Systems Reduction using Rough Sets Theory (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 157-162]
-
Montazeri, Reza
Two and Three Dimensional Monte Carlo Simulation of Magnetite Nanoparticle Based Ferrofluids [Volume 26, Issue 1, 2013, Pages 99-104]
-
Moosaee, M. H.
A Compositional Adaptation-based Approach for Recommending Learning Resources in Software Development [Volume 35, Issue 7, 2022, Pages 1317-1329]
-
Moosaei, A.
Development of a Wideband Bi-layered Mantle-Cloak for Perfect Electric Conductor Cylindrical Objects under Obliquely Incident Plane Wave [Volume 36, Issue 12, 2023, Pages 2161-2168]
-
Moosaei, H. R.
Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
-
Moosavi, Azam
Ethanol-based Tape Casting Process of the Textured Bi0.5(Na0.80K0.20)0.5TiO3-BiFeO3 Ceramics [Volume 28, Issue 4, 2015, Pages 561-566]
-
Moosavi, R.
Application of the Schwarz-Christoffel Transformation in Solving Two-Dimensional Turbulent Flows in Complex Geometries [Volume 21, Issue 4, 2008, Pages 397-406]
-
Moosavi, S. M. S.
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Moosavian, H.
Testing Soccer League Competition Algorithm in Comparison with Ten Popular Meta-heuristic Algorithms for Sizing Optimization of Truss Structures [Volume 30, Issue 7, 2017, Pages 926-936]
-
Moosavian, N.
Testing Soccer League Competition Algorithm in Comparison with Ten Popular Meta-heuristic Algorithms for Sizing Optimization of Truss Structures [Volume 30, Issue 7, 2017, Pages 926-936]
-
Moosavian, Naser
Hydraulic Analysis of Water Supply Networks using a Modified Hardy Cross Method [Volume 27, Issue 9, 2014, Pages 1331-1338]
-
Moosavinezhad, S. A. H.
Effect of Acidic Environments Containing Hydrochloric Acid on Rubberized Concrete [Volume 36, Issue 12, 2023, Pages 2198-2206]
-
MORABIT, ABDELMAJID
Effects of Berms on Rubble Mound Breakwater Stability under Seismic Loading [(Articles in Press)]
-
Morad, N. A
Total Phenolic Content, Total Flavonoid Content and Radical Scavenging Activity from Zingiber zerumbet Rhizome using Subcritical Water Extraction [Volume 31, Issue 8, 2018, Pages 1421-1429]
-
Moradi, A
Optimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation [Volume 31, Issue 2, 2018, Pages 299-306]
-
Moradi, A.
Introducing a New Method for Tracking and Transmitting Maximum Power of a Wind Power Plant to the Grid During Wind Shortages [Volume 33, Issue 5, 2020, Pages 1027-1037]
-
Moradi, G
Frictional Strain Hardening-softening in Experimental and Numerical Investigation of Arching Effect [Volume 28, Issue 2, 2015, Pages 180-189]
-
Moradi, M.
Influence of Operating Variables on Performance of Nanofiltration Membrane for Dye Removal from Synthetic Wastewater Using Response Surface Methodology [Volume 29, Issue 12, 2016, Pages 1650-1658]
-
Moradi, M.
Transmission Electron Microscopy Sample Preparation of INCONEL 738 Nickel-Base Superalloy [Volume 32, Issue 6, 2019, Pages 852-859]
-
Moradi, Mohammad.H
New Technique for Global Solar Radiation Forecast using Bees Algorithm (RESEARCH NOTE) [Volume 26, Issue 11, 2013, Pages 1385-1392]
-
Moradi, R.
A New Mechanism for Detecting Shilling Attacks in Recommender Systems Based on Social Network Analysis and Gaussian Rough Neural Network with Emotional Learning [Volume 36, Issue 2, 2023, Pages 321-334]
-
Moradi, S
The Ballistic Behavior of High Strength, Low Alloy-100 Steel at Sub-zero Temperatures [Volume 29, Issue 12, 2016, Pages 1747-1756]
-
Moradi, S.
A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain [Volume 33, Issue 4, 2020, Pages 668-675]
-
Moradi, S.
Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
-
Moradi Abadi, A.
A New Method for Open Government using of Information Technology [Volume 35, Issue 3, 2022, Pages 493-501]
-
Moradian, Ala
Availability Analysis For Heterogeneous Nucleation In A Uniform Electric Field [Volume 16, Issue 2, 2003, Pages 205-216]
-
Moradian, M
Effect of Different Nanoparticles and Friction Stir Process Parameters on Surface Hardness and Morphology of Acrylonitrile Butadiene Styrene [Volume 31, Issue 7, 2018, Pages 1117-1122]
-
Moradi Cheshmeh Beigi, H
Design, Optimization and FEM Analysis of a Surface-Mounted Permanent-magnet Brushless DC Motor [Volume 31, Issue 2, 2018, Pages 339-345]
-
Moradi CheshmehBeigi, Hassan
Design and Simulation of a Moving-magnet-type Linear Synchronous Motor for Electromagnetic Launch System [Volume 30, Issue 3, 2017, Pages 351-356]
-
Moradi pour, Parviz
Numerical Modeling of Railway Track Supporting System using Finite-Infinite and Thin Layer Elements [Volume 22, Issue 2, 2009, Pages 131-144]
-
Moradli, M. H.
Design and Fabrication of a Quartz Crystal Resonator Used in a Thickness-Monitor Unit (TECHNICAL NOTES). [Volume 10, Issue 1, 1997, Pages 45-48]
-
Moradloo, A. J.
Seismic Assessment of Concrete Dams, Considering Anisotropy Caused by Lift Joints [Volume 37, Issue 4, 2024, Pages 753-762]
-
Moradlou, M.
Utilizing a New Voltage Stability Index in Distribution Power System in Presence of Wind Turbine Units [Volume 37, Issue 4, 2024, Pages 711-724]
-
Moradpour, E
A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings [Volume 31, Issue 5, 2018, Pages 792-798]
-
Moravvej Farshi, Mohammad
Effects of D-Doping on Characteristics of AlAs/GaAs Barriers Grown by Mba at 400 ??C [Volume 9, Issue 1, 1996, Pages 1-8]
-
Moravvej Farshi, Mohammad
Characteristic of P-type AlAs/GaAs Bragg Mirrors Grown by MBE on (100) and (311)A Oriented Substrates [Volume 11, Issue 1, 1998, Pages 15-20]
-
More, S. R.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
More, S. R.
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Morenov, V
Investigation of the Fractional Composition Effect of the Carbonate Weighting Agents on the Rheology of the Clayless Drilling Mud [Volume 31, Issue 7, 2018, Pages 1152-1158]
-
Morenov, V.
Development of Drilling Mud Solution for Drilling in Hard Rocks (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 620-626]
-
Morenov, V.
Influence of the Solid Phase's Fractional Composition on the Filtration Characteristics of the Drilling Mud [Volume 32, Issue 5, 2019, Pages 794-798]
-
Morenov, V.
Effect of Carbonate Additives on Dynamic Filtration Index of Drilling Mud [Volume 33, Issue 5, 2020, Pages 934-939]
-
Morenov, Valentin
Energy Delivery at Oil and Gas Wells Construction in Regions With Harsh Climate [Volume 29, Issue 2, 2016, Pages 274-279]
-
Morenov, Valentin
Reliability analysis of a drilling bit penetration model in oil and gas wells: A case study [(Articles in Press)]
-
Morozov, V.
Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor [Volume 33, Issue 7, 2020, Pages 1423-1430]
-
Morsali, Vafa
Seismic Design of Steel Structures Based on Ductility and Incremental Nonlinear Dynamic Analysis [Volume 29, Issue 1, 2016, Pages 23-30]
-
Morshedsolouk, F.
Compressive Mechanical Properties and Water Absorption of Glass fiber-reinforced Plastics Pipes Aged in Caspian SeaWater [Volume 37, Issue 6, 2024, Pages 1146-1153]
-
Mortazavi, H.
Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1856-1862]
-
Mortazavi, R.
An Effective Method for Utility Preserving Social Network Graph Anonymization Based on Mathematical Modeling [Volume 31, Issue 10, 2018, Pages 1624-1632]
-
Mortazavi, R.
An Efficient Secret Sharing-based Storage System for Cloud-based Internet of Things [Volume 32, Issue 8, 2019, Pages 1117-1125]
-
Mortazavi, R.
Repeated Record Ordering for Constrained Size Clustering [Volume 33, Issue 7, 2020, Pages 1266-1273]
-
Mortazavi, S. S
The Analysis of Wheel Loader Diesel Engine Crankshaft Failure [Volume 31, Issue 3, 2018, Pages 473-479]
-
Mortezaei, Z.
Image Enhancement Using an Adaptive Un-sharp Masking Method Considering the Gradient Variation [Volume 30, Issue 8, 2017, Pages 1118-1125]
-
Mos'hefi Shabestari, Z.
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
-
Mos'hefi Shabestari, Z.
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
-
Mosa, A. M.
Modification of the Properties of Warm Mix Asphalt Using Recycled Plastic Bottles [Volume 31, Issue 9, 2018, Pages 1514-1520]
-
Mosaedi, Farid
The Comparison of Imperialist Competitive Algorithm Applied and Genetic Algorithm for Machining Allocation of Clutch Assembly (TECHNICAL NOTE) [Volume 26, Issue 12, 2013, Pages 1485-1494]
-
Mosalaeifard, Amir Hossein
Three-dimensional Vibration Suppression of an Euler-bernolli Beam via Boundary Control Method [Volume 28, Issue 5, 2015, Pages 755-763]
-
Mosalman, S.
The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 807-813]
-
Mosalman Yazdi, H.
Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
-
Mosalman Yazdi, H.
Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
-
Mosavi, Aghil
Accurate Determination of the Pull-in Voltage for MEMS Capacitive Microphone with Clamped Square Diaphragm [Volume 25, Issue 3, 2012, Pages 161-166]
-
Mosavi Pourgharbi, S. H.
Gum Tragacanth Fibers Introducing Primitive GT Fibers (RESEARCH NOTE) [Volume 17, Issue 2, 2004, Pages 201-208]
-
Moses, Sharon
State Dependent M/M/C/K/N Machining System with Mixed Spares and Removable Repairmen [Volume 18, Issue 1, 2005, Pages 21-28]
-
Mosharaf-Dehkordi, M
Enhancement of the Cooling System Performance of the Proton-exchange Membrane Fuel Cell By Baffle-restricted Coolant Flow Channels [Volume 31, Issue 5, 2018, Pages 812-819]
-
Moshfeghian, M.
The Pfgc Equation of State at the Age of Fourteen [Volume 1, Issue 4, 1988, Pages 181-192]
-
Moshfeghian, M.
Prediction of Thermodynamic Properties of Refrigerants in the Superheated Ragion [Volume 4, Issue 1, 1991, Pages 13-22]
-
Moshfeghian, M.
Accurate Prediction of Thermodynamic Properties of Alcoholes Ketones and Ethers by MCORGC Eos [Volume 7, Issue 4, 1994, Pages 185-196]
-
Moshiri, B.
A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion [Volume 15, Issue 2, 2002, Pages 145-156]
-
Moshiri, B.
Fuzzy Clustering Approach Using Data Fusion Theory and its Application To Automatic Isolated Word Recognition [Volume 16, Issue 4, 2003, Pages 329-336]
-
Moshiri, B.
Designing a Home Security System using Sensor Data Fusion with DST and DSMT Methods [Volume 22, Issue 1, 2009, Pages 13-20]
-
Moshiri, B.
A Novel Approach to Modular Control of Highway and Arterial Networks using Petri Nets Modeling [Volume 36, Issue 8, 2023, Pages 1578-1588]
-
Moshrefi, A.
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Moshrefzadeh-sani, Hadi
A Continuum Model For Stone-wales Defected Carbon Nanotubes [Volume 28, Issue 3, 2015, Pages 433-439]
-
Moshtagh, Amin
Performance of Porous Pavement Containing Different Types of Pozzolans [Volume 32, Issue 9, 2019, Pages 1277-1283]
-
Moslehi, G.
Mathematical Model for Bi-objective Maximal Hub Covering Problem with Periodic Variations of Parameters [Volume 32, Issue 7, 2019, Pages 964-975]
-
Moslehi, P.
Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 1-8]
-
Moslehi, P.
Some Investigation on Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 45-53]
-
Moslehi, P.
Heavy Metal Removal from Water and Wastewater Using Raw and Modified Diatomite (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 141-146]
-
Moslehi Niasar, M.
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Moslem, K.
Proposed Dynamic Soil Pressure Diagram On Rigid Walls. [Volume 21, Issue 3, 2008, Pages 213-224]
-
Moslemipour, G.
Performance Analysis of Dynamic and Static Facility Layouts in a Stochastic Environment [Volume 30, Issue 5, 2017, Pages 710-719]
-
Mos’hafi, M.
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Mossavinik, V.
Axi-symmetric Stagnation–Point Flow and Heat Transfer Obliquely Impinging on a Rotating Circular Cylinder [Volume 20, Issue 1, 2007, Pages 67-82]
-
Mosseibi, A.
Dual Fuelling of a Direct Injection Automotive Diesel Engine by Diesel and Compressed Natural Gas [Volume 13, Issue 3, 2000, Pages 51-58]
-
Mostafa, Salama A
Hierarchical Deep Learning Model for Tooth Classification in Intra-Oral Dental Photographs [(Articles in Press)]
-
Mostafaeipour, A.
Developing a New Algorithm for a Utility-based Network Design Problem with Elastic Demand [Volume 30, Issue 5, 2017, Pages 758-767]
-
Mostafaeipour, A.
Integrated Order Batching and Distribution Scheduling in a Single-block Order Picking Warehouse Considering S-Shape Routing Policy [Volume 31, Issue 10, 2018, Pages 1723-1733]
-
Mostafa gharabaghi, Ahmadreza
Experimental Investigation of the Effect of Splitter Plate Angle on the Under-Scouring of Submarine Pipeline Due to Steady Current and Clear Water Condition [Volume 28, Issue 3, 2015, Pages 368-377]
-
Mostafapour, A.
Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process [Volume 35, Issue 8, 2022, Pages 1501-1508]
-
Mostafavi, M.
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Mostafavi, Seyed alireza
An Analytical Model for Flame Propagation through Moist Lycopodium Particles with Non-unity Lewis Number [Volume 27, Issue 5, 2014, Pages 793-802]
-
Mostafavian, Seyedamin
Output-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data [Volume 32, Issue 12, 2019, Pages 1753-1761]
-
Mostaghimi, J.
NiO-Ni-Al2O3(γ) Nanocatalyst by Pulse Electrocodeposition Over Ni Open-cell Foam for Methane Reforming [Volume 36, Issue 10, 2023, Pages 1908-1918]
-
Mostari, Mst. Sharmin
Synthesis and Characterization of Porcelain Body Developed from Rice Husk Ash (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 25-31]
-
Mostofizadeh, Ali Reza
Parametric Study of Movement Path in Two-dimensional Wing Flow Separation: Experimental Investigation [Volume 30, Issue 9, 2017, Pages 1401-1407]
-
Mostoufizadeh, A. R.
Average Heat Transfer Coefficient in Rectangular Ducts with Baffle Blockages [Volume 1, Issue 4, 1988, Pages 211-218]
-
Motadel, M. R.
A Proposed Model for Persian Stance Detection on Social Media [Volume 36, Issue 6, 2023, Pages 1048-1059]
-
Motagi, K.
An Experimental Investigation on Durability Properties of Reactive Powder Concrete [Volume 35, Issue 2, 2022, Pages 327-336]
-
Motahar, S.
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
-
Motalleb, M. A.
High Energy Release-high Retraction Smart Polymer Fibers used in Artificial Muscle Fabrication [Volume 36, Issue 4, 2023, Pages 788-796]
-
Motamedi, S.A.
Determining the Proper compression Algorithm for Biomedical Signals and Design of an Optimum Graphic System to Display Them (TECHNICAL NOTES) [Volume 7, Issue 2, 1994, Pages 119-123]
-
Motamedi, S.A.
A New Iterative Fuzzy-Based Method for Image Enhancement (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 69-74]
-
Motamedzadegan, Ali
Kinetics of Reshteh Khoshkar Color Changes During Atmospheric and Vacuum Deep-fat Frying [Volume 29, Issue 12, 2016, Pages 1670-1676]
-
Motameni, H.
Mapping Activity Diagram to Petri Net: Application of Markov Theory for Analyzing Non-Functional Parameters [Volume 20, Issue 1, 2007, Pages 65-76]
-
Motameni, H.
Determining the Composition Functions of Persian Non-standard Sentences in Terminology using a Deep Learning Fuzzy Neural Network Model [Volume 33, Issue 12, 2020, Pages 2471-2481]
-
Motameni, H.
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Motameni, H.
Outlier Detection in Test Samples using Standard Deviation and Unsupervised Training Set Selection [Volume 36, Issue 1, 2023, Pages 119-129]
-
Motameni, Homayoon
Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
-
Motameni, Homayun
Energy Aware Strategies for Scheduling Precedence Constrained Parallel Tasks in DVFS-enabled Cloud Datacenter [(Articles in Press)]
-
Motameni, M.
An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
-
Motie Birjandi, A. A.
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Mou, Ruqiang
Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
-
Mouaz, R.
Design of a Printed Circuit Board for Real-time Monitoring and Control of Pipeline’s Cathodic Protection System via IoT and a Cloud Platform [Volume 36, Issue 9, 2023, Pages 1667-1676]
-
Moubed, Mitra
A Hybrid Dynamic Programming for Inventory Routing Problem in Collaborative Reverse Supply Chains [Volume 29, Issue 10, 2016, Pages 1412-1420]
-
Mouhine, M.
Improving Seismic Vulnerability of Irregular Reinforced Concrete Moment-Resisting Frames using Shear Walls [Volume 37, Issue 2, 2024, Pages 425-438]
-
Mousavi, A.
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
-
Mousavi, M.
Group Decision Making based on a New Evaluation Method and Hesitant Fuzzy Setting with an Application to an Energy Planning Problem [Volume 28, Issue 9, 2015, Pages 1303-1311]
-
Mousavi, M. H.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Mousavi, N.
Phenol Biodegradation Kinetics in the Presence of Supplimentary Substrate [Volume 25, Issue 3, 2012, Pages 181-192]
-
Mousavi, S. A.
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
-
Mousavi, S. A.
Visible Light Activated Fe-N-SiO2/TiO2 Photocatalyst: Providing an Opportunity for Enhanced Photocatalytic Degradation of Antibiotic Oxytetracycline in Aqueous Solution [Volume 36, Issue 4, 2023, Pages 615-629]
-
Mousavi, SA
Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 554-563]
-
Mousavi, Seyyed Alireza
Dechlorination of Polychlorinated Biphenyls in Real Waste Transformer Oil Using a Modified Household Microwave Oven in Presence of Sodium Hydroxide and Polyethylene Glycol [Volume 29, Issue 9, 2016, Pages 1208-1213]
-
Mousavi, Seyyed Alireza
Decolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1582-1586]
-
Mousavi, Seyyed Alireza
Removal of Fe2+ from Aqueous Solution Using Manganese Oxide Coated Zeolite and Iron Oxide Coated Zeolite [Volume 29, Issue 11, 2016, Pages 1587-1594]
-
Mousavi, S. M.
Solving New Product Selection Problem by a New Hierarchical Group Decision-making Approach with Hesitant Fuzzy Setting [Volume 30, Issue 5, 2017, Pages 729-738]
-
Mousavi, S. M.
Effects of Brace-viscous Damper System on the Dynamic Response of Steel Frames [Volume 33, Issue 5, 2020, Pages 720-731]
-
Mousavi, S.M.
An integrated AHP-VIKOR methodology for plant location selection [Volume 24, Issue 2, 2011, Pages 127-137]
-
Mousavi, S.M.
A Multi-Criteria Decision-Making Approach with Interval Numbers for Evaluating Project Risk Responses [Volume 25, Issue 2, 2012, Pages 121-130]
-
Mousavi, S.M.
Optimal Design of the Cross-docking in Distribution Networks: Heuristic Solution Approach [Volume 27, Issue 4, 2014, Pages 533-544]
-
Mousavi, S.M.
A New Compromise Decision-making Model based on TOPSIS and VIKOR for Solving Multi-objective Large-scale Programming Problems with a Block Angular Structure under Uncertainty [Volume 27, Issue 11, 2014, Pages 1673-1680]
-
Mousavi, S.M.
A New Balancing and Ranking Method based on Hesitant Fuzzy Sets for Solving Decision-making Problems under Uncertainty [Volume 28, Issue 2, 2015, Pages 214-223]
-
Mousavi, S.M.
Evaluating Construction Projects by a New Group Decision-Making Model Based on Intuitionistic Fuzzy Logic Concepts [Volume 28, Issue 9, 2015, Pages 1312-1319]
-
Mousavi, S.M.
Solving Critical Path Problem in Project Network by a New Enhanced Multi-objective Optimization of Simple Ratio Analysis Approach with Interval Type-2 Fuzzy Sets [Volume 30, Issue 9, 2017, Pages 1352-1361]
-
Mousavi, S. S.
A High Gain and Forward Body Biastwo-stage Ultra-wideband Low Noise Amplifier with Inductive Feedback in 180 nm CMOS Process [Volume 31, Issue 9, 2018, Pages 1553-1558]
-
MOUSAVI, SYEDESMAEIL
Effect of Moisture Content on Shear Strength of Offshore Clay Interface Steel Surface [Volume 29, Issue 2, 2016, Pages 183-191]
-
MOUSAVI, SYEDESMAEIL
Performance of Non-fired Green Brick Containing Rice Husk as Sustainable Building Material [Volume 29, Issue 3, 2016, Pages 306-312]
-
Mousavi Bafrouyi, S.M.S
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Mousavi. M., S. A.
Seismic and Economic Optimization of Water Distribution Networks Using Entropy and Ant Colony Algorithm [Volume 36, Issue 5, 2023, Pages 979-990]
-
Mousavi Motlagh, Seyyed Hadi
A Novel Objective Function for Directional Overcurrent Relays Coordination [Volume 28, Issue 2, 2015, Pages 205-213]
-
Mousavipoor, R.
Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
-
Mousaviraad, S.M.
The Effect of Asymmetric Water Entry on the Hydrodynamic Impact [Volume 17, Issue 2, 2004, Pages 205-212]
-
MousaviRad, Fereshteh
Seismic Performance Evaluation of Water Pipelines Based on Reliability Analysis (Case study: Jafar Abad-Germi Water Pipeline) [(Articles in Press)]
-
Mousavi Tilehboni, S. E.
Lattice Boltzmann Simulation of Deformation and Breakup of a Droplet under Gravity Force Using Interparticle Potential Model [Volume 26, Issue 7, 2013, Pages 781-794]
-
Mousavy Mohammadi, Zaeim
Compositional Modeling of Wax Formation in Petroleum Mixtures [Volume 14, Issue 4, 2001, Pages 303-312]
-
Mousavy Mohammadi, Zaeim
Thermal Contact Resistance of Wavy Surfaces (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 293-300]
-
Mousazadeh Mousavi, S. Y.
A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
-
Mousazadeh Mousavi, S. Y.
Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
-
Mousivand, M.
Unconfined Compressive Strength Characteristics of Treated Peat Soil with Cement and Basalt Fibre [Volume 35, Issue 5, 2022, Pages 1089-1095]
-
Moussavi Khalkhali, A.
Designing a Home Security System using Sensor Data Fusion with DST and DSMT Methods [Volume 22, Issue 1, 2009, Pages 13-20]
-
Movaghar, A.
Mapping Activity Diagram to Petri Net: Application of Markov Theory for Analyzing Non-Functional Parameters [Volume 20, Issue 1, 2007, Pages 65-76]
-
Movagharnejad, K.
Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
-
Movagharnejad, K.
Predicting the Coefficients of Antoine Equation Using the Artificial Neural Network (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1353-1357]
-
Movahed Asl, R.
Two and Three-Dimensional Seepage Analysis of Earth Dams Considering Horizontal Filter Blanket Effects (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 187-195]
-
Movahedi, S.
Numerical Meshless Method in Conjunction with Bayesian Theorem for Electrical Tomography of Concrete [Volume 33, Issue 6, 2020, Pages 1070-1084]
-
Movahedian, H.
Determining the Proper compression Algorithm for Biomedical Signals and Design of an Optimum Graphic System to Display Them (TECHNICAL NOTES) [Volume 7, Issue 2, 1994, Pages 119-123]
-
Mowia, D.
Computer Simulation of Ammonia Cold Shot Converter [Volume 8, Issue 2, 1995, Pages 1-61]
-
Mowla, D.
Computer Simulation of Hydrodynamic Behavior of Aggregative Fluidized Beds [Volume 2, Issue 1, 1989, Pages 55-64]
-
Mozafari, A.A.
Fuels With a High Enthalpy of Evaporation in Si Engine [Volume 6, Issue 2, 1993, Pages 109-116]
-
Mozafari, A.A.
Modeling and Control of Gas Turbine Combustor with Dynamic and Adaptive Neural Networks (TECHNICAL NOTE) [Volume 21, Issue 1, 2008, Pages 71-84]
-
Mozafari, B.
Coordinated Control of Doubley Fed Induction Generator Virtual Inertia and Power System Oscillation Damping Using Fuzzy Logic [Volume 32, Issue 4, 2019, Pages 536-547]
-
Mozafari, B.
A New Optimal Distributed Strategy to Mitigate the Phase Imbalance in Smart Grids [Volume 33, Issue 12, 2020, Pages 2489-2495]
-
Mozafari, M.
Evaluation of Corrosion Resistance of Bi-layered Plasma-sprayed Coating on Titanium Implants [Volume 35, Issue 4, 2022, Pages 635-643]
-
Mozafari, S. B.
Delay-Scheduled Controllers for Inter-Area Oscillations Considering Time Delays [Volume 31, Issue 11, 2018, Pages 1852-1861]
-
Mozafari, S. B.
Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
-
Mozdgir, Ashkan
Case Mix Planning using The Technique for Order of Preference by Similarity to Ideal Solution and Robust Estimation: a Case Study [Volume 30, Issue 9, 2017, Pages 1362-1371]
-
Mu, Y.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Muis, A.
CNN-based Approach for Enhancing Brain Tumor Image Classification Accuracy [Volume 37, Issue 5, 2024, Pages 984-996]
-
Mukherjee, Sanchayan
An Analytical Approach to the Effect of Viscous Dissipation on Shear-Driven Flow between two parallel plates with Constant Heat Flux Boundary Conditions [Volume 26, Issue 5, 2013, Pages 533-542]
-
MulIer-Steinhagen, H.
Mechanism and Prevention of Scale Formation in Boilers [Volume 6, Issue 1, 1993, Pages 1-8]
-
Mulyawati, I. B.
Numerical Simulation of Embankment Settlement in Vacuum Preloading Systems [Volume 36, Issue 4, 2023, Pages 817-823]
-
Mulyo, A
Seismicity of Batubesi Dam at Sorowako Region Based on Earthquake Data and Microtremor Measurement [Volume 31, Issue 8, 2018, Pages 1180-1186]
-
Mu’min, M. A.
Mitigation from SQL Injection Attacks on Web Server using Open Web Application Security Project Framework [Volume 37, Issue 4, 2024, Pages 635-645]
-
Muna, N.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Munasir, N.
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
-
Munasir, N.
Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
-
Munasir, N.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Munazat, D. R.
Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
-
Muniandy, R.
A Newly Developed Laboratory Slab Roller Compactor (Turamesin): An Overview [Volume 21, Issue 2, 2008, Pages 133-142]
-
Muniraj, D.
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Muniyandi, Venkatesan
Heat Transfer Study of Perforated Fin under Forced Convection [Volume 28, Issue 10, 2015, Pages 1500-1506]
-
Murdas, I. A.
Quadrature Amplitude Modulation All Optical Orthogonal Frequency Division Multiplexing-dense Wavelength Division Multiplexing-optical Wireless Communication System under Different Weather Conditions [Volume 30, Issue 7, 2017, Pages 988-994]
-
Murmu, M
Combine Use of Fly Ash and Rice Husk Ash in Concrete to Improve its Properties (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1012-1019]
-
Murmu, M.
Early Age Shrinkage Behavior of Triple Blend Concrete [Volume 33, Issue 8, 2020, Pages 1459-1464]
-
Murmu, M.
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Murtaza, Q.
Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature [Volume 30, Issue 7, 2017, Pages 1090-1097]
-
Murugaiyan, V.
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Murugan, B. S.
Eco-friendly Hybrid Concrete Using Pozzolanic Binder and Glass Fibers [Volume 33, Issue 7, 2020, Pages 1183-1191]
-
MURUGESAN, SASIKUMAR
Modified Bi-directional AC/DC Power Converter with Power Factor Correction [Volume 25, Issue 3, 2012, Pages 175-180]
-
MURUGESAN, SASIKUMAR
Space Vector Control Scheme of Three Level ZSI Applied to Wind Energy Systems [Volume 25, Issue 4, 2012, Pages 275-282]
-
Musabbikhah, Musabbikhah
Modelling and Optimisation of Coconut Shell Drying and Carbonisation Using Multi-response Taguchi Method with Multi-response Signal-to-noise Procedure [Volume 31, Issue 3, 2018, Pages 464-472]
-
Musabikha, S.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Musfirah Mazlan, N.
Determination of Shock Standoff Distance for Wedge at Supersonic Flow [Volume 32, Issue 7, 2019, Pages 1049-1056]
-
Muslim, D
Determining of Geotechnical Domain Based on Joint Density and Fault Orientation at Batu Hijau Mine,West Sumbawa-Indonesia (TECHNICAL NOTE) [Volume 31, Issue 4, 2018, Pages 679-683]
-
Mustafa, A. I.
A 65 nm CMOS Feedforward Transimpedance Amplifier for Optical Fibers Communications [Volume 35, Issue 10, 2022, Pages 1830-1840]
-
Mustapha, N. M
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Mut, V. A.
Robust Hybrid Motion Force Control Algorithm for Robot Manipulators [Volume 13, Issue 4, 2000, Pages 55-64]
-
Mutair, M. Q.
Relationship Between Compressive Strength and Non-destructive Tests of Colored Geopolymer Concrete Based on Fly Ash [Volume 35, Issue 9, 2022, Pages 1752-1758]
-
Muthadhi, A.
Improving Thermal and Mechanical Property of Lightweight Concrete Using N-Butyl Stearate/Expanded Clay Aggregate with Alccofine1203 [Volume 33, Issue 10, 2020, Pages 1842-1851]
-
Muthuramalingam, T.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Mutlu, R.
Demonstration of Synaptic Connections with Unipolar Junction Transistor based Neuron Emulators [Volume 33, Issue 11, 2020, Pages 2195-2200]
N
-
N, Austin
Artificial Neural Network Involved in the Action of Optimum Mixed Refrigerant (Domestic Refrigerator) (TECHNICAL NOTE) [Volume 26, Issue 10, 2013, Pages 1235-1242]
-
N, JEYANTHI
RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
-
N, Sathurappan
Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
-
N, SHENBAGA VINAYAGA MOORTHI
Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
-
Nabavian, Seyed Rasoul
Output-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data [Volume 32, Issue 12, 2019, Pages 1753-1761]
-
Nabi, H.
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Nabian, N.
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Nabian, N.
Functionalized Halloysite Nanotubes and Graphene Oxide Nanosheets Fillers Incorporated in UF Membranes for Oil/Water Separation [Volume 36, Issue 7, 2023, Pages 1201-1210]
-
Nabian, N.
Application of Polyvinyl Chloride- Halloysite Nanotubes/Uio66-NH2 Mixed Matrix Membranes in Separation of Sunflower Oil from Water [Volume 37, Issue 9, 2024, Pages 1736-1745]
-
Nabian Dehaghani, M.
A Distributed Cooperative Secondary Control Scheme for Obtaining Power and Voltage References of Distributed Generations in Islanded DC Microgrids [Volume 37, Issue 2, 2024, Pages 341-351]
-
Nabipour, A
EFFECT OF INORGANIC HYBRID LiBr ON THE SILICA MATRIX XEROGELS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 51-56]
-
Nabipour, mehran
Electrophoretic Deposition of Microwave Combustion Synthesized Hydroxyapatite and Its Carbon Nanotube Reinforced Nanocomposite on 316L Stainless Steel [Volume 25, Issue 4, 2012, Pages 329-336]
-
Naceri, A.
Effects of Pozzolanic Admixture (Waste Bricks) on Mechanical Response of Mortar [Volume 21, Issue 1, 2008, Pages 1-8]
-
Naceri, A.
Moisture Diffusion Properties of Fabric Composite (Glass Fiber/Epoxy Resin) [Volume 22, Issue 2, 2009, Pages 205-210]
-
Naceri, B.
Enhancing Wind Power Conversion System Control Under Wind Constraints Using Single Hidden Layer Neural Network [Volume 37, Issue 7, 2024, Pages 1306-1316]
-
Nada, O.
Mistake Proofing Cam Mechanism Through Six-sigma Process: Case Study on Clothes Printing Machines [Volume 32, Issue 3, 2019, Pages 438-444]
-
Nadalinia Chari, F.
Chemical Reaction-Diffusion Model Around a Vessel for Studying Temperature and Concentration of Three Chemical Species by Finite Element Method [Volume 36, Issue 1, 2023, Pages 171-181]
-
Naderan, K.
Stress Concentration Factors in Spherical Vessels with Single Oblique Nozzle [Volume 8, Issue 2, 1995, Pages 95-106]
-
Naderi, Abusaleh
On Symmetric and Asymmetric Buckling Modes of Functionally Graded Annular Plates under Mechanical and Thermal Loads [Volume 26, Issue 4, 2013, Pages 433-446]
-
Naderi, Abusaleh
Element Free Galerkin Method for Static Analysis of Thin Micro/Nanoscale Plates Based on the Nonlocal Plate Theory [Volume 26, Issue 7, 2013, Pages 795-806]
-
Naderi, B
A New Combination of Robust-possibilistic Mathematical Programming for Resilient Supply Chain Network under Disruptions and Uncertainty: A Real Supply Chain (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 612-621]
-
Naderi, B.
A Scheduling Model of Flexible Manufacturing System to Reduce Waste and Earliness/Tardiness Penalties [Volume 30, Issue 5, 2017, Pages 749-757]
-
Naderi, B.
Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
-
Naderi, Bahman
Optimizing Flexible Manufacturing System: A Developed Computer Simulation Model [Volume 29, Issue 8, 2016, Pages 1112-1119]
-
Naderi, Bahman
Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
-
Naderi, G.
Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design [Volume 33, Issue 9, 2020, Pages 1803-1810]
-
Naderi, M.
Modeling and Performance Evaluation of Multi-Processors Organization with Shared Memories [Volume 1, Issue 1, 1988, Pages 37-46]
-
Naderi, R.
Application of Random Radial Point Interpolation Method to Foundations Bearing Capacity Considering Progressive Failure [Volume 36, Issue 2, 2023, Pages 264-275]
-
Naderi, Reza
Base Level Evaluation in Buildings with Different Foundation Levels by Soil-foundation-structure Interaction [Volume 30, Issue 9, 2017, Pages 1288-1297]
-
Naderian Jahromi, A.
A Fast Method for Calculation of Transformers Leakage Reactance Using Energy Technique [Volume 16, Issue 1, 2003, Pages 41-48]
-
Nadernejad, Ehsan
Image Restoration Using A PDE-Based Approach [Volume 20, Issue 3, 2007, Pages 225-236]
-
Nadernejad, Ehsan
Employing Sensor Network to Guide Firefighters in Dangerous Area [Volume 23, Issue 2, 2010, Pages 191-202]
-
Naderpour, H
Evaluation of Project Critical Success Factors for Key Construction Players and Objectives [Volume 31, Issue 2, 2018, Pages 228-240]
-
Nadjafi, M.
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Nadjafikhah, M.
First Integrals of a Special System of Odes (TECHNICAL NOTE) [Volume 21, Issue 4, 2008, Pages 375-383]
-
Naei, M.H.
Effects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core [Volume 24, Issue 3, 2011, Pages 281-290]
-
NAEIMI, FARID
Effect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-velocity Oxyfuel Processes [Volume 30, Issue 3, 2017, Pages 432-438]
-
Nagaraj, Y.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Nageena Parveen, S.
Reference Satellite Strategic Methods to Improve Position Accuracy of Rover with Resolved Integer Ambiguities Using Linear Combination in DIRNSS System [Volume 33, Issue 11, 2020, Pages 2188-2194]
-
Nagendra, R.
Experimental Investigation on Strength, Durability and Micro Structural Characteristics of Slag-Based Cement Mortar [Volume 37, Issue 4, 2024, Pages 763-778]
-
Nagendram, P. S.
Categorization of Multiple Crops Using Geospatial Technology, Machine Learning and Google Earth Engine [Volume 37, Issue 9, 2024, Pages 1763-1772]
-
Nagendra Parashar, B. S.
Integrated Approach for Cellular Manufacturing a Case Study (TECHNICAL NOTE) [Volume 17, Issue 1, 2004, Pages 73-84]
-
Naghashzadegan, M
Comparison of the hyperbolic range of two-fluid models on two-phase gas -liquid flows [Volume 31, Issue 1, 2018, Pages 144-156]
-
Naghibi Sistani, M. B.
Using Sliding Mode Controller and Eligibility Traces for Controlling the Blood Glucose in Diabetic Patients at the Presence of Fault [Volume 33, Issue 2, 2020, Pages 257-268]
-
Naghibzadeh, M.
Safety Verification of Real Time Systems Serving Periodic Devices [Volume 7, Issue 3, 1994, Pages 133-142]
-
NaghiKhani, M.
Creep Life Assessment of Primary Reformer HP40-NB Modified Steel Tube of an Ammonia Plant [Volume 17, Issue 2, 2004, Pages 183-190]
-
Naghipour, Daryoosh
Photochemical Degradation of 2,4-dichlorophenol in Aqueous Solutions by Fe2+/ Peroxydisulfate/ UV Process [Volume 30, Issue 1, 2017, Pages 15-22]
-
Naghipour, M.
Estimation of Hydrodynamic Force on Rough Circular Cylinders in Random Waves and Currents (RESEARCH NOTE) [Volume 14, Issue 1, 2001, Pages 25-34]
-
Naghipour, M.
Large Scale Experiments Data Analysis for Estimation of Hydrodynamic Force Coefficients Part 1: Time Domain Analysis [Volume 14, Issue 4, 2001, Pages 323-332]
-
Naghipour, M.
Large Scale Experiments Data Analysis for Estimation of Hydrodynamic Force Coefficients [Volume 16, Issue 1, 2003, Pages 29-40]
-
Naghipour, M.
Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading [Volume 33, Issue 8, 2020, Pages 1529-1543]
-
Naghipour, M.
Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
-
Naghipour, Morteza
Flexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections [Volume 32, Issue 9, 2019, Pages 1238-1247]
-
Naghi Pour, M.
Experimental Study and Modeling of Reinforced Concrete Beams Strengthened by Post-Tensioned External Reinforcing Bars [Volume 23, Issue 2, 2010, Pages 127-144]
-
Naghizadeh, Ali
Base Level Evaluation in Buildings with Different Foundation Levels by Soil-foundation-structure Interaction [Volume 30, Issue 9, 2017, Pages 1288-1297]
-
Nagiredla, S.
Rheological Properties of the In-house Prepared Magneto-rheological Fluid in the Pre-yield Region [Volume 35, Issue 11, 2022, Pages 2238-2246]
-
Nagpal, D.
Analyse Power Consumption by Mobile Applications Using Fuzzy Clustering Approach [Volume 31, Issue 12, 2018, Pages 2037-2043]
-
Nagpal, R.
Analyse Power Consumption by Mobile Applications Using Fuzzy Clustering Approach [Volume 31, Issue 12, 2018, Pages 2037-2043]
-
Nahar, T. T.
Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
-
Nahavandi, N
An Integrated Closed-loop Supply Chain Configuration Model and Supplier Selection based on Offered Discount Policies [Volume 31, Issue 3, 2018, Pages 440-449]
-
Nahavandi, N.
Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
-
Nahavandi, N.
An Efficient Approach for Bottleneck Resource(s) Detection Problem in the Multi-objective Dynamic Job Shop Environments [Volume 29, Issue 12, 2016, Pages 1691-1703]
-
Nahavandi, N.
Quay Cranes and Yard Trucks Scheduling Problem at Container Terminals [Volume 33, Issue 9, 2020, Pages 1751-1758]
-
Nahavandi, Nasim
A Mathematical Model and Grouping Imperialist Competitive Algorithm for Integrated Quay Crane and Yard Truck Scheduling Problem with Non-crossing Constraint [Volume 32, Issue 10, 2019, Pages 1464-1479]
-
Nahavandi, S.
A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
-
Nahid, P.
Heavy Metal Removal from Water and Wastewater Using Raw and Modified Diatomite (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 141-146]
-
Nahid, Parvin
THE PRODUCTION OF GLUCOAMYLASE BY ASPERGILLUS NIGER UNDER SOLID STATE CONDITIONS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 1-8]
-
Nahvi, A.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Nahvi, Hassan
The Response of Two-Degree of Freedom Self-Sustained Systems with Quadratic Nonlinearities to a Parametric Excitation (RESEARCH NOTE) [Volume 14, Issue 3, 2001, Pages 255-272]
-
Nahvi, Hassan
Using Pattern Search Algorithm and Finite Element Method to Detect Rotor Cracks [Volume 22, Issue 2, 2009, Pages 195-204]
-
Nahvi, Hassan
A Particle Swarm Optimization Algorithm for Mixed-Variable Nonlinear Problems [Volume 24, Issue 1, 2011, Pages 65-78]
-
Nahvi, Hassan
Vibration Analysis of a Nonlinear System with a Nonlinear Absorber under the Primary and Super-harmonic Resonances (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 499-508]
-
Naife, T. M.
Synthesis, Characterization, and Evaluation of an Eco-friendly Demulsifier for Crude Oil Emulsion Treatment Using Waste Corn Oil [Volume 37, Issue 3, 2024, Pages 468-475]
-
NAIK, JAJATI KESHARI
Estimation of Local Scour Depth Around Bridge Pier [(Articles in Press)]
-
Nailwal, Beena
RELIABILITY MEASURES AND SENSITIVITY ANALYSIS OF A COMPLEX MATRIX SYSTEM INCLUDING POWER FAILURE [Volume 25, Issue 2, 2012, Pages 115-130]
-
Naim, R
Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation [Volume 31, Issue 8, 2018, Pages 1446-1454]
-
Nair, Meenu
Simulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching [Volume 25, Issue 4, 2012, Pages 267-274]
-
Nair, Nirmal-Kumar C
A New Adaptive Load-Shedding and Restoration Strategy for Autonomous Operation of Microgrids: A Real-Time Study [Volume 33, Issue 1, 2020, Pages 82-91]
-
Nair, S. S.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Naithani, A.
Distance Measures of Pythagorean Fuzzy TOPSIS Approach for Online Food Delivery Apps [Volume 35, Issue 10, 2022, Pages 1877-1886]
-
Nait-Said, M. S.
Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
-
Nait-Said, N.
Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
-
Najafi, A. A.
Resource Investment Problem With Discounted Cash Flows [Volume 18, Issue 1, 2005, Pages 51-62]
-
Najafi, A. A.
Resource Investment Problem with Discounted Cash Flows [Volume 18, Issue 1, 2005, Pages 53-64]
-
Najafi, A. A.
A Constraint Programming Approach to Solve Multi-skill Resource-constrained Project Scheduling Problem with Calendars [Volume 35, Issue 8, 2022, Pages 1579-1587]
-
Najafi, Amir Abbas
Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
-
Najafi, Arash
Optimum Design of Interbasin Pipe System (RESEARCH NOTES) [Volume 8, Issue 1, 1995, Pages 49-54]
-
Najafi, Arash
Microencapsulation of Orange Oil by Complex Coacervation and its Release Behavior (REASEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 333-342]
-
Najafi, Asghar
Nonlinear Dynamics of the Rotational Slender Axially Moving String with Simply Supported Conditions [Volume 29, Issue 6, 2016, Pages 834-842]
-
Najafi, E.
Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
-
Najafi, E.
A Two-Stage Green Supply Chain Network with a Carbon Emission Price by a Multi-objective Interior Search Algorithm [Volume 32, Issue 6, 2019, Pages 828-834]
-
Najafi, E.
Comprehensive Framework of Influential Factors on Innovation Ecosystem Resilience: Using Meta-Synthesis and Structural Equation Modelling [Volume 37, Issue 2, 2024, Pages 323-340]
-
Najafi, H. R.
A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]
-
Najafi, H. R.
A New Generalized Step-up Multilevel Inverter Topology Based on Combined T-type and Cross Capacitor Modules [Volume 36, Issue 7, 2023, Pages 1354-1368]
-
Najafi, M.
Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
-
Najafi, S
Quality Factor of Free In-plane Vibration of a Fully Clamped Rectangular Micro-plate [Volume 31, Issue 1, 2018, Pages 96-103]
-
Najafi, Saber
Investigation of Thermoelastic Damping in the Longitudinal Vibration of a Micro Beam [Volume 28, Issue 2, 2015, Pages 314-320]
-
Najafi, S. E.
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Najafi, S. E.
Developing a Fuzzy Measurement of Alternatives and Ranking Compromise Solution Method for Determining Essential Barriers in Iranian Car Industry [Volume 36, Issue 1, 2023, Pages 90-97]
-
Najafi, S. E.
A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
-
Najafi, S.E.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Najafifard‎, Mohammad ‎
Removal of Congo Red Anionic Dye from Aqueous Solution Using Polyaniline/TiO2 and Polypyrrole/TiO2 Nanocomposites: Isotherm, Kinetic, and Thermodynamic Studies [Volume 29, Issue 12, 2016, Pages 1659-1669]
-
Najafi Moghaddam Gilani, V.
Relationship between Pedestrians’ Speed, Density and Flow Rate of Crossings through Urban Intersections (Case Study: Rasht Metropolis) (RESEARCH NOTE) [Volume 30, Issue 12, 2017, Pages 1814-1821]
-
Najafi Moghaddam Gilani, V.
Statistical Analysis of the Railway Accidents Causes in Iran (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1822-1830]
-
Najafizadeh, A.
Structural and Mechanical Characterization of Austempered Cu - Sn Ductile Iron Alloys [Volume 5, Issue 1, 1992, Pages 39-48]
-
Najafizadeh, A.
Effect of Composition on the Recrystallization Behavior of if Steels During Simulated Hot Strip Rolling [Volume 5, Issue 1, 1992, Pages 49-60]
-
Najafpour, G.
Plant-Based Calcium Fructoborate as Boron-Carrying Nanoparticles for Neutron Cancer Therapy [Volume 32, Issue 4, 2019, Pages 460-466]
-
Najafpour, G. D.
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Najafpour, G. D
Highly Sensitive Amperometric Sensor Based on Gold Nanoparticles Polyaniline Electrochemically Reduced Graphene Oxide Nanocomposite for Detection of Nitric Oxide [Volume 31, Issue 2, 2018, Pages 188-195]
-
Najafpour, G. D
Composite Multi Wall Carbon Nano Tube Polydimethylsiloxane Membrane Bioreactor for Enhanced Bioethanol Production from Broomcorn Seeds [Volume 31, Issue 4, 2018, Pages 516-523]
-
Najafpour, G. D.
A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
-
Najafpour, G. D.
Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
-
Najafpour, G. D.
Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
-
Najafpour, G. D.
Separation of Curcumin from Curcuma longa L. and its Conjugation with Silica Nanoparticles for Anti-cancer Activities [Volume 31, Issue 11, 2018, Pages 1803-1809]
-
Najafpour, G. D.
Subcritical Water Extraction of Bioactive Compounds from Ginger (Zingiber officinale Roscoe) [Volume 31, Issue 12, 2018, Pages 1991-2000]
-
Najafpour, G. D.
Enhanced Vitamin B12 Production using Chlorella vulgaris [Volume 32, Issue 1, 2019, Pages 1-9]
-
Najafpour, G. D.
Experimental Investigations on Behaviour of Rhamnolipid Biosurfactant as a Green Stabilizer for the Biological Synthesis of Gold Nanoparticles [Volume 33, Issue 6, 2020, Pages 1054-1060]
-
Najafpour, Ghasem
Bioreactor Scale-up for Water-Gas Shift Reaction [Volume 9, Issue 3, 1996, Pages 121-129]
-
Najafpour, Ghasem
Solubility of Hydrogen Sulfid and Sulfur Dioxide in Triethylen Glycol, Tetra Ethylene Clycol and Diethanol (TECHNICAL NOTE). AMINE SOLUTION [Volume 10, Issue 2, 1997, Pages 103-110]
-
Najafpour, Ghasem
Microbial Desulfurization of Malaysian Coal in Batch Process using Mixed Culture (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-234]
-
Najafpour, Ghasem
Performance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors [Volume 17, Issue 2, 2004, Pages 105-120]
-
Najafpour, Ghasem
Dynamic Model For Production of Biohydrogen Via Water- Gas Shift Reaction (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 145-152]
-
Najafpour, Ghasem
Citronellyl Butyrate Synthesis in Non-Conventional Media Using Packed-Bed Immobilized Candida Rugosa Lipase Reactor [Volume 18, Issue 2, 2005, Pages 153-164]
-
Najafpour, Ghasem
Pretreated Palm Oil Mill Effluent (POME) Digestion in an Up-Flow Anaerobic Sludge Fixed Film Bioreactor: a Comparative Study [Volume 19, Issue 1, 2006, Pages 1-9]
-
Najafpour, Ghasem
Acid Hydrolysis of Pretreated Palm Oil Lignocellulosic Wastes [Volume 20, Issue 2, 2007, Pages 147-156]
-
Najafpour, Ghasem
Dairy Wastewater Treatment using Three-Stage Rotating Biological Contactor (NRBC) [Volume 22, Issue 2, 2009, Pages 107-114]
-
Najafpour, Ghasem
Recovery of Methyl Acetoacetate from Antibiotic Production Plant\'s Waste Streams (TECHNICAL NOTE) [Volume 22, Issue 2, 2009, Pages 123-129]
-
Najafpour, Ghasem
Environmental Impact of Fossil Fuel Utilization in Neka Thermal Power Plant [Volume 23, Issue 2, 2010, Pages 115-120]
-
Najafpour, Ghasem
Lipase Production in Solid State Fermentation Using Aspergillus niger: Response Surface Methodology [Volume 25, Issue 3, 2012, Pages 151-160]
-
Najafpour, Ghasem
Phenol Biodegradation Kinetics in the Presence of Supplimentary Substrate [Volume 25, Issue 3, 2012, Pages 181-192]
-
Najafpour, Ghasem
Enhanced Bioethanol Production in Batch Fermentation by Pervaporation Using a PDMS Membrane Bioreactor [Volume 25, Issue 4, 2012, Pages 249-258]
-
Najafpour, Ghasem
Comparative Studies on Effect of Pretreatment of Rice Husk for Enzymatic Digestibility and Bioethanol Production [Volume 26, Issue 5, 2013, Pages 455-464]
-
Najafpour, Ghasem
A Two-step Catalytic Production of Biodiesel from Waste Cooking Oil [Volume 26, Issue 6, 2013, Pages 563-570]
-
Najafpour, Ghasem
A comparison on Lipase Production from Soybean meal and Sugarcane Bagasse in Solid State Fermentation using Rhizopus oryzae [Volume 27, Issue 2, 2014, Pages 171-176]
-
Najafpour, Ghasem
Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
-
Najafpour, Ghasem
Hydrolysis of Sorghum (Broomcorn) in Diluted Hydrochloric Acid [Volume 28, Issue 11, 2015, Pages 1543-1551]
-
Najafpour, Ghasem
Formic Acid and Microwave Assisted Extraction of Curcumin from Turmeric (Curcuma longa L.) [Volume 29, Issue 2, 2016, Pages 145-151]
-
Najafpour, Ghasem
Growth Kinetic Survey in Direct Biological Sweetening of Natural Gas in Batch Bioreactor: Temperature Studies [Volume 29, Issue 6, 2016, Pages 735-741]
-
Najafpour, Ghasem
Kinetics and Isotherm Studies of the Immobilized Lipase on Chitosan Support [Volume 29, Issue 10, 2016, Pages 1319-1331]
-
Najafpour, Ghasem
Electrical Energy Management in Industrial Wastewater Treatment Plant [Volume 32, Issue 9, 2019, Pages 1269-1276]
-
Najafpour Darzi, G.
Growth Media Optimization for Production of Alkaline Protease from Industrial Wastewater using Bacillus subtilis PTCC 1254 [Volume 36, Issue 3, 2023, Pages 513-522]
-
Najafpour Darzi, Ghasem
Preparation of Nanochitosan as an Effective Sorbent for the Removal of Copper Ions from Aqueous Solutions [Volume 26, Issue 8, 2013, Pages 829-836]
-
Najafpour Darzi, Ghasem
Production of Single Cell Protein from Sugarcane Bagasse by Saccharomyces cerevisiae in Tray Bioreactor [Volume 29, Issue 8, 2016, Pages 1029-1036]
-
Najafpour Darzi, Ghasem
Microwave Ultrasound Assisted Extraction: Determination of Quercetin for Antibacterial and Antioxidant Activities of Iranian Propolis [Volume 32, Issue 8, 2019, Pages 1057-1064]
-
Najafpour Darzi, Ghasem
Recycling and Reuse of Organo-sulfur Compounds from Barrels of Natural Gas Contaminated with Mercaptan Odorant [Volume 32, Issue 11, 2019, Pages 1527-1533]
-
Najafpour-Darzi, G.
Potential Applications of Ginger Rhizomes as a Green Biomaterial: A Review [Volume 36, Issue 2, 2023, Pages 372-383]
-
Najar Araabi, B.
Foreground Extraction Using Hilbert-Schmidt Independence Criterion and Particle Swarm Optimization Independent Component Analysis [Volume 33, Issue 5, 2020, Pages 1020-1026]
-
Najar-Nobari, H.
Coupling Nonlinear Element Free Galerkin and Linear Galerkin Finite Volume Solver for 2D Modeling of Local Plasticity in Structural Material [Volume 33, Issue 3, 2020, Pages 387-400]
-
Naji, A. J.
Axial Behavior of Concrete Filled-steel Tube Columns Reinforced with Steel Fibers [Volume 35, Issue 9, 2022, Pages 1682-1689]
-
Naji, H. I.
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
Najimi, M.
Joint Sensing Times Detection Thresholds and Users Association Optimization in Multi-Channel Multi-Antenna Cognitive Radio Networks [Volume 36, Issue 9, 2023, Pages 1704-1719]
-
Najimi, Mehdi
Stress Intensity Factor Determination in Functionally Graded Materials, Considering Continuously Varying of Material Properties [Volume 29, Issue 12, 2016, Pages 1741-1746]
-
Najjarpour, M.
Probabilistic Reactive Power Flow Optimization of Distribution System in Presence of Distributed Units Uncertainty Using Combination of Improved Taguchi Method and Dandelion Algorithm [Volume 37, Issue 1, 2024, Pages 37-47]
-
Najjarpour, M.
Improving Reliability of Active Distribution Networks Using Probabilistic Assessment of Renewable Resource Units [Volume 37, Issue 9, 2024, Pages 1780-1789]
-
Nakhaei, M. R.
Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design [Volume 33, Issue 9, 2020, Pages 1803-1810]
-
Nakhaei, M. R.
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Nakhaei Nezhad, mahdi
Integration of Multi-period Vehicle Routing Problem and Economic Selection of Customers with the Objective of Optimizing Distribution, Sales and Discounts Planning [Volume 29, Issue 12, 2016, Pages 1704-1716]
-
Nakhaei Zadeh, A.
Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
-
Nakhai, Isa
A Particle Swarm Optimization Approach to Joint Location and Scheduling Decisions in A Flexible Job Shop Environment [Volume 28, Issue 12, 2015, Pages 1756-1764]
-
Nakhaie-Jazar, G.
Vibration of Road Vehicles with Non linear Suspensions [Volume 10, Issue 4, 1997, Pages 209-218]
-
Nakhai Kamalabadi, I.
Coordination of Pricing and Order Quantity for Two Replaceable and Seasonal Products [Volume 33, Issue 3, 2020, Pages 439-447]
-
Nakhai Kamalabadi, I.
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Nakhai Kamalabadi, Isa
Joint Pricing and Inventory Control for Seasonal and Substitutable Goods Mentioning the Symmetrical and Asymmetrical Substitution [Volume 27, Issue 9, 2014, Pages 1385-1394]
-
Nakhai Kamalabadi, Isa
A Non-linear Integer Bi-level Programming Model for Competitive Facility Location of Distribution Centers [Volume 29, Issue 8, 2016, Pages 1131-1140]
-
Nakhai Kamalabadi, Isa
Critical Path Method for Flexible Job Shop Scheduling Problem with Preemption [Volume 30, Issue 2, 2017, Pages 261-269]
-
Nakhai Kamal Abadi, I.
Considering Production Planning in the Multi-period Inventory Routing Problem with Transshipment between Retailers [Volume 31, Issue 9, 2018, Pages 1568-1574]
-
Namakshenas, Mohammad
Real-time Scheduling of a Flexible Manufacturing System using a Two-phase Machine Learning Algorithm [Volume 26, Issue 9, 2013, Pages 1067-1076]
-
Namar, M.M.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Namazi, A.
Software for Kinetic Process Simulation (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 61-72]
-
Namdar, Jafar
Designing a Reliable Distribution Network with Facility Fortification and Transshipment under Partial and Complete Disruptions [Volume 29, Issue 9, 2016, Pages 1273-1281]
-
Nami, B.
The Effect of Rapid Deformation Process to Improve Creep and Tensile Resistance of AZ91 Magnesium Alloy Plates [Volume 33, Issue 10, 2020, Pages 2039-2046]
-
Nami, Hossein
Thermodynamic Analysis and Optimization of a Novel Cogeneration System: Combination of a gas Turbine with Supercritical CO2 and Organic Rankine Cycles (TECHNICAL NOTE) [Volume 29, Issue 12, 2016, Pages 1765-1774]
-
Namjoo, Moslem
Finite Element Analysis for Estimating the Effect of Various Working Conditions on the Temperature Gradients Created Inside a Rolling Tire [Volume 27, Issue 12, 2014, Pages 1920-1927]
-
Namjoo, Moslem
Evaluating the Effects of Ceramic Layer and Thermal Dam on Optimizing the Temperature Gradient of a Gasoline Engine Piston (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1525-1532]
-
Namjoy, A.
A Sample Dependent Decision Fusion Algorithm for Graph-based Semi-supervised Learning [Volume 33, Issue 5, 2020, Pages 1010-1019]
-
Nanda, R. S.
Intelligent Vehicle Highway Systems (Ivhs) Issues and Recommendations [Volume 8, Issue 3, 1995, Pages 121-132]
-
NANDAN, ABHISHEK
Experimental Study of Heat Transfer Rate in a Shell and Tube Heat Exchanger with Air Bubble Injection (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1160-1166]
-
Nanto, D.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Nanvakenari, S.
Predicting the Coefficients of Antoine Equation Using the Artificial Neural Network (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1353-1357]
-
Narasimha Reddy, P.
Effect of Antifreeze Admixtures on Cold Weather Concrete [Volume 32, Issue 3, 2019, Pages 366-372]
-
Narasimha Reddy, P.
Experimental Study on TGA, XRD and SEM Analysis of Concrete with Ultra-fine Slag (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 679-684]
-
Narasimha Reddy, P.
Effect of Alccofine on Mechanical and Durability Index Properties of Green Concrete (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 813-819]
-
Narimanzadeh, N.
GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 135-143]
-
Narimanzadeh, N.
Modeling and Multi-Objective Optimization of Stall Control on NACA0015 Airfoil with a Synthetic Jet using GMDH Type Neural Networks and Genetic Algorithms [Volume 22, Issue 1, 2009, Pages 69-88]
-
Narimanzadeh, N.
Optimal Design of Sandwich Panels Using Multi-Objective Genetic Algorithm and Finite Element Method [Volume 27, Issue 3, 2014, Pages 395-402]
-
Narmadha, R.
Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
-
Narrei, Somaye
Choosing the Optimum Underground Mine Layout with Regard to Metal Price Uncertainty Using Expected Utility Theory [Volume 32, Issue 12, 2019, Pages 1813-1822]
-
Naseralavi, M.
Analysis of Natural Frequencies for a Laminated Composite Plate with Piezoelectric Patches using the First and Second Eigenvalue Derivatives [Volume 21, Issue 1, 2008, Pages 85-96]
-
Naseri, J.
Accelerating Legislation Processes through Semantic Similarity Analysis with BERT-based Deep Learning [Volume 37, Issue 6, 2024, Pages 1050-1058]
-
Naseri, S.A.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Naseri, Tohid
Microstructure and Grain Refining Performance of a New Al-Ti-C Master Alloy (RESEARCH NOTE) [Volume 26, Issue 7, 2013, Pages 701-706]
-
Nasernejad, B.
Novel Method for the Preparation of Copper Phthalocyanin Blue Nanoparticles in an Electrochemical Cell Irradiated by Microwave (RESEARCH NOTE) [Volume 20, Issue 3, 2007, Pages 257-262]
-
Nasir, Munasir
Synthesis of Fe3O4/SiO2/PEG Nanocomposite from Minerals Sands: Kinetic Adsorption Heavy Metal Ion from Aqueous Solution [(Articles in Press)]
-
Nasiraee, H.
DoS-Resistant Attribute-Based Encryption in Mobile Cloud Computing with Revocation [Volume 32, Issue 9, 2019, Pages 1290-1298]
-
Nasir Aghdam, H.
Channel Estimation and Carrier Frequency Offset Compensation in Orthogonal Frequency Division Multiplexing System Using Adaptive Filters in Wavelet Transform Domain [Volume 33, Issue 7, 2020, Pages 1231-1239]
-
Nasiri, Elahe
Addressing the Freight Consolidation and Containerization Problem by Recent and Hybridized Meta-heuristic Algorithms [Volume 30, Issue 3, 2017, Pages 403-410]
-
Nasiri, J. A.
Probabilistic Twin Support Vector Machine for Solving Unclassifiable Region Problem [Volume 35, Issue 1, 2022, Pages 1-13]
-
Nasiri, N.
Earth’s Magnetic Field for Spacecraft Attitude Control Applications (TECHNICAL NOTE) [Volume 28, Issue 5, 2015, Pages 648-653]
-
Nasirifar, A.
Development of Light Dynamic Penetrometer for Application in Dense Soil [Volume 36, Issue 11, 2023, Pages 1982-1992]
-
Nasiri Khamesloo, F.
Optimizing Heat Transfer in Microchannel Heat Sinks: A Numerical Investigation with Nanofluids and Modified Geometries [Volume 37, Issue 5, 2024, Pages 860-875]
-
Nasiri-Zarandi, R.
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Nasri, A.
A Temperature Compensation Voltage Controlled Oscillator Using a Complementary to Absolute Temperature Voltage Reference [Volume 32, Issue 5, 2019, Pages 710-719]
-
Nasrolahi Matak, hedayat
Energy Aware Strategies for Scheduling Precedence Constrained Parallel Tasks in DVFS-enabled Cloud Datacenter [(Articles in Press)]
-
Nasrollahzadeh, S.
The Analysis of Bayesian Probit Regression of Binary and Polychotomous Response Data [Volume 20, Issue 3, 2007, Pages 237-248]
-
Nasrollanejad, Saeed
Identification of Volatile Organic Compounds from Trichoderma virens (6011) by GC-MS and Separation of a Bioactive Compound via Nanotechnology [Volume 29, Issue 10, 2016, Pages 1347-1353]
-
Nassehi, V.
Finite Element Methods for Convection Diffusion Equation [Volume 4, Issue 3, 1991, Pages 93-100]
-
Nassehi, V.
Application of a One-Dimensional Computer Model to Flood Routing in Narrow Rivers [Volume 6, Issue 1, 1993, Pages 9-14]
-
Nassehi, V.
A Numerical Method for the Determination of an Effective Modules for Coated Glass Fibers Used in Phenolic Composites [Volume 13, Issue 3, 2000, Pages 1-10]
-
Nassrullah, Z.
Evaluating Traffic Performance on Basra City Urban Roads Network [Volume 36, Issue 11, 2023, Pages 2063-2072]
-
Nasution, H
Isolationand Characterization of Nanocrystal from Corncob Waste Using H2SO4 Hydrolysis Method (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 533-537]
-
Nateghi, A. R.
A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
-
Nateghi, F.
Tests to Determine the Joint Stiffness and Resisting Moment Capacity of Joints in Timber-Framed Houses [Volume 8, Issue 2, 1995, Pages 71-84]
-
Nateghi, F.
Effect of Link Slab on Seismic Response of Two Span Straight and Skew Bridges [Volume 21, Issue 3, 2008, Pages 257-266]
-
Nateghi, F.
Seismic Damage and Disaster Management Maps (A Case Study) [Volume 21, Issue 4, 2008, Pages 337-344]
-
Nateghi, F.
Non-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls [Volume 22, Issue 4, 2009, Pages 343-356]
-
Nateghi, F.
THEORETICAL AND NUMERICAL STUDY ON THE STRENGTHENED STEEL PLATE SHEAR WALLS BY FRP LAMINATES [Volume 25, Issue 1, 2012, Pages 25-37]
-
Nateghi, F.
SEISMIC BEHAVIOR OF SILOS WITH DIFFERENT HEIGHT TO DIAMETER RATIOS CONSIDERING GRANULAR MATERIAL-STRUCTURE INTERACTION [Volume 25, Issue 1, 2012, Pages 27-38]
-
Nateghi, F.
The Effect of Local Damage on Energy Absorption of Steel Frame Buildings During Earthquake [Volume 26, Issue 2, 2013, Pages 143-152]
-
Nateghi, F.
Non-Linear Behavior of New (FSFN) Moment Resisting Connections in Comparison to the Existing KBB Connections in Steel Frames [Volume 26, Issue 10, 2013, Pages 1119-1134]
-
Nateghi, F.
Comparison of using Different Modeling Techniques on the Prediction of the Nonlinear Behavior of R/C Shear Walls [Volume 27, Issue 2, 2014, Pages 269-282]
-
Nateghi, F.
The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections [Volume 27, Issue 7, 2014, Pages 1005-1014]
-
Nateghi, F.
The Effect of Tuned Mass Damper on Seismic Response of Building Frames with Uncertain Structural Characteristics [Volume 28, Issue 5, 2015, Pages 662-670]
-
Nateghi, F.
Improved Behaviour of Accordion Metallic Dampers Affected by the Increasing Number of Layers [Volume 28, Issue 6, 2015, Pages 864-870]
-
Nateghi, F.
Earthquake Evaluation of the Non Structural Elements in a Thermal Power Plant [Volume 29, Issue 1, 2016, Pages 8-13]
-
Nateghi, F.
Seismic Evaluation and Retrofit of Gas Stations: Case Study [Volume 29, Issue 2, 2016, Pages 176-182]
-
Nateghi, F.
Seismic and Economic Optimization of Water Distribution Networks Using Entropy and Ant Colony Algorithm [Volume 36, Issue 5, 2023, Pages 979-990]
-
Nateghi A., F
Seismic Retrofitting RC Structures with Precast Prestressed Concrete Braces- ABAQUS FEA Modeling [Volume 31, Issue 3, 2018, Pages 394-404]
-
Nateghi-A, Fariborz
Prediction of Engineered Cementitious Composite Material Properties Using Artificial Neural Network [Volume 32, Issue 11, 2019, Pages 1534-1542]
-
Nateri, M. S.
Fabrication of a Novel MEMS Capacitive Microphone using Lateral Slotted Diaphragm [Volume 23, Issue 3, 2010, Pages 191-200]
-
Nath, D.
Low Dropout Based Noise Minimization of Active Mode Power Gated Circuit [Volume 31, Issue 9, 2018, Pages 1546-1552]
-
Nath Pradhan, S
Test Power Reduction by Simultaneous Don’t Care Filling and Ordering of Test Patterns Considering Pattern Dependency [Volume 31, Issue 5, 2018, Pages 752-758]
-
Natu, H.
Metallurgical and Mechanical Properties of Laser Cladded AlFeCuCrCoNi-WC10 High Entropy Alloy Coating [Volume 33, Issue 7, 2020, Pages 1397-1402]
-
Naumova, A. O.
Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media [Volume 32, Issue 5, 2019, Pages 641-646]
-
Navabakhsh, M.
A Bi-level Meta-heuristic Approach for a Hazardous Waste Management Problem [Volume 33, Issue 7, 2020, Pages 1304-1310]
-
Navabakhsh, M.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Navabakhsh, M.
Performance Evaluating Energy, Economic and Environmental Performance with an Integrated Approach of Data Envelopment Analysis and Game Theory [Volume 37, Issue 5, 2024, Pages 959-973]
-
Navabi, M
Earth’s Magnetic Field for Spacecraft Attitude Control Applications (TECHNICAL NOTE) [Volume 28, Issue 5, 2015, Pages 648-653]
-
Navaneethan, K. S.
Performance Studies on Glass Fiber Reinforced Recycled Aggregate Concrete [Volume 36, Issue 5, 2023, Pages 904-913]
-
Navayi Neya, Bahram
Output-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data [Volume 32, Issue 12, 2019, Pages 1753-1761]
-
Naveen, S.
Effect of Elevated Temperature on Engineered Cementitious Composites using Natural River Sand [Volume 35, Issue 9, 2022, Pages 1787-1794]
-
Naveen Kumar, P.
Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
-
Naveen Kumar, P.
Assessing Potential Performance of GPS and Galileo in Context of Broadcast Precise Orbits and Clock Corrections [Volume 36, Issue 3, 2023, Pages 465-472]
-
Naveen Kumar, P.
Improving the Position Accuracy of Rover Receiver using Differential Positioning in Indian Regional Navigation Satellite System [Volume 36, Issue 3, 2023, Pages 497-504]
-
Navi, K.
High Speed Full Swing Current Mode BiCMOS Logical Operators [Volume 20, Issue 3, 2007, Pages 211-220]
-
Nawansyah, R
Isolationand Characterization of Nanocrystal from Corncob Waste Using H2SO4 Hydrolysis Method (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 533-537]
-
Nawazish Mehdi, S.
Effect of Ignition Timing, Equivalence Ratio, and Compression Ratio on the Performance and Emission Characteristics of a Variable Compression Ratio Si Engine using Ethanol-Unleaded Gasoline Blends [Volume 21, Issue 1, 2008, Pages 97-106]
-
Nawazish Mehdi, S.
Exhaust Emission Analysis of an Internal Combustion Engine Fuelled with Hydrogen-Ethanol Dual Fuel [Volume 21, Issue 2, 2008, Pages 203-210]
-
Nayak, A
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite [Volume 31, Issue 7, 2018, Pages 1088-1094]
-
Nayak, R. K
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite [Volume 31, Issue 7, 2018, Pages 1088-1094]
-
Nazaktabar, M.
Natural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls [Volume 15, Issue 3, 2002, Pages 293-302]
-
Nazari, A.
A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
-
Nazari, Ahad
Power plant project risk assessment using a fuzzy-ANP and fuzzy-TOPSIS method [Volume 25, Issue 2, 2012, Pages 107-120]
-
Nazari, F.
A Novel Multi-user Detection Approach on Fluctuations of Autocorrelation Estimators in Non-Cooperative Communication [Volume 33, Issue 4, 2020, Pages 546-551]
-
Nazarian, P.
Utilizing a New Voltage Stability Index in Distribution Power System in Presence of Wind Turbine Units [Volume 37, Issue 4, 2024, Pages 711-724]
-
NAZARPOUR, darush
Assessing the Impact of Size and Site of DGs and SMs in Active Distribution Networks for Energy Losses Cost [Volume 28, Issue 7, 2015, Pages 1002-1010]
-
Nazaryan, Ernest
Analytical Modeling of Axi-Symmetric Sheet Metal Forming [Volume 24, Issue 1, 2011, Pages 55-63]
-
Nazemizadeh, M.
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Nazemnezhad, R
Surface Energy and Elastic Medium Effects on Torsional Vibrational Behavior of Embedded Nanorods [Volume 31, Issue 3, 2018, Pages 495-503]
-
Nazoktabar, Mohsen
Controlling the Power Output and Combustion Phasing in an HCCI Engine [Volume 27, Issue 11, 2014, Pages 1757-1766]
-
Nazoktabar, Mohsen
Simulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE) [Volume 27, Issue 12, 2014, Pages 1928-1935]
-
N. Babaei, Fatemeh
Recycling and Reuse of Organo-sulfur Compounds from Barrels of Natural Gas Contaminated with Mercaptan Odorant [Volume 32, Issue 11, 2019, Pages 1527-1533]
-
Nefedov, Yury Viktorovich
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Negahdar, A.
Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
-
Negahdar, H.
Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
-
Negaresh, F.
Gender Identification of Mobile Phone Users based on Internet Usage Pattern [Volume 36, Issue 2, 2023, Pages 335-347]
-
Nejadabbasi, P.
Autonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach [Volume 31, Issue 9, 2018, Pages 1593-1601]
-
Nejati, Z.
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Nejati, Z.
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Nekokar, Nariman
Isothermal Redox Kinetics of Co3O4-Fe2O3 Nano-Composite as a Thermochemical Heat Storage Material [Volume 32, Issue 8, 2019, Pages 1200-1209]
-
Nema, S.
Energy Efficient Novel Design of Static Random Access Memory Memory Cell in Quantum-dot Cellular Automata Approach [Volume 32, Issue 5, 2019, Pages 720-725]
-
Nemati, A.
Effects of Aluminum, Silicon And Ferro Silicon Anti Oxidants in MgO C Refractories [Volume 16, Issue 4, 2003, Pages 361-372]
-
Nemati, A. R.
A New Optimization Algorithm Based on Particle Swarm Optimization Genetic Algorithm and Sliding Surfaces [Volume 37, Issue 9, 2024, Pages 1716-1735]
-
Nemati, Arash
Hydrogen and Ethanol as Potential Alternative Fuels Compared to Gasoline under Improved Exhaust Gas Recirculation [Volume 27, Issue 3, 2014, Pages 449-456]
-
Nemati, Mahsa
Thin Film Heterogeneous Ion Exchange Membranes Prepared by Interfacial Polymerization of PAA-co-Iron-Nickel Oxide Nanoparticles on Polyvinylchloride Based Substrate [Volume 29, Issue 3, 2016, Pages 297-305]
-
Nemati, Mostafa
Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
-
Nemati, Nasrin
An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
-
Nemati Aghamaleki, S. T.
Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
-
Nematifard, V.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Nematzadeh, H.
Outlier Detection in Test Samples using Standard Deviation and Unsupervised Training Set Selection [Volume 36, Issue 1, 2023, Pages 119-129]
-
Nematzadeh, Hossein
Deterministic Measurement of Reliability and Performance Using Explicit Colored Petri Net in Business Process Execution Language and Eflow [Volume 28, Issue 10, 2015, Pages 1439-1446]
-
Nematzadeh, M.
Numerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading [Volume 33, Issue 8, 2020, Pages 1529-1543]
-
Nematzadeh, M.
Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
-
Nematzadeh, Mahdi
Flexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections [Volume 32, Issue 9, 2019, Pages 1238-1247]
-
Nematzadeh, Zahra
Deterministic Measurement of Reliability and Performance Using Explicit Colored Petri Net in Business Process Execution Language and Eflow [Volume 28, Issue 10, 2015, Pages 1439-1446]
-
Nemat Zadeh, Hossein
Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
-
Neshaei, S.A.L.
Simulation of Gravity Wave Propagation in Free Surface Flows by an Incompressible SPH Algorithm [Volume 25, Issue 3, 2012, Pages 239-248]
-
Neshat, Najmeh
An Approach of Artificial Neural Networks Modeling Based on Fuzzy Regression for Forecasting Purposes [Volume 28, Issue 11, 2015, Pages 1651-1655]
-
Neshat, Najmeh
A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
-
Neshati, M. H
Sensitivity Analysis of a Wideband Backward-wave Directional Coupler Using Neural Network and Monte Carlo Method (RESEARCH NOTE) [Volume 31, Issue 5, 2018, Pages 729-733]
-
Neshati, M. H.
Probe-Fed Rectangular Dielectric Resonator Antennas,Theoretical Modeling and Experiments [Volume 16, Issue 1, 2003, Pages 41-46]
-
Neshati, M. H.
Numerical Modeling and Experimental Study of Probe-Fed Rectangular Dielectric Resonator Antenna (RDRA) Supported by Finite Circular Ground Plane [Volume 17, Issue 3, 2004, Pages 269-280]
-
Neshati, M. H.
Design and Development of High Gain, Low Profile and Circularly Polarized Cavity-backed Slot Antennas Using High-order Modes of Square Shaped Substrtae Integrated Waveguide Resonator [Volume 30, Issue 12, 2017, Pages 1840-1847]
-
Neshati, M. H.
Development of a New Backward Directional Coupler Based on Perforated Substrates [Volume 36, Issue 2, 2023, Pages 311-320]
-
Neshati, M. H.
Development of a Wideband Bi-layered Mantle-Cloak for Perfect Electric Conductor Cylindrical Objects under Obliquely Incident Plane Wave [Volume 36, Issue 12, 2023, Pages 2161-2168]
-
Neshati, Mohammad H.
Development a New Technique Based on Least Square Method to Synthesize the Pattern of Equally Space Linear Arrays [Volume 32, Issue 11, 2019, Pages 1620-1626]
-
Neshati, Mohammad Hassan
Development of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte [Volume 29, Issue 8, 2016, Pages 1062-1067]
-
Neshati, Mohammad Hassan
Development of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs [Volume 30, Issue 3, 2017, Pages 344-350]
-
Newman, R.C.
Dealloying and Stress Corrosion Craking of Copper Alloys in Cu(I) Solutions [Volume 3, Issue 3, 1990, Pages 112-117]
-
Nezamabadi, M.M.
A New Hybrid Brushless DC Motor/Generator without Permanent Magnet [Volume 20, Issue 1, 2007, Pages 77-86]
-
Nezamabadi, N.
Design and Fabrication of a Microwave Weed Killer Device for Weed Control Applications [Volume 32, Issue 7, 2019, Pages 947-953]
-
Nezamolmolki, Davoud
Free Vibration Analysis of a Sloping-frame: Closed-form Solution versus Finite Element Solution and Modification of the Characteristic Matrices (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 378-386]
-
Nezhad Afrasiabi, Maryam
Utilizing Decision Making Methods and Optimization Techniques to Develop a Model for International Facility Location Problem under Uncertainty [Volume 29, Issue 1, 2016, Pages 68-77]
-
Ngadi, N
Synthesis and Characterization of CaO-TiO2 for Transesterification of Vegetable Palm Oil [Volume 31, Issue 8, 2018, Pages 1326-1333]
-
Nguyen, D. T.
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Nguyen, Dinh Son
A Methodology for Product Performance Analysis under Effects of Multi-Physical Phenomena [Volume 25, Issue 4, 2012, Pages 341-352]
-
Nguyen, D. S.
An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
-
Nguyen, H. A. T.
Probabilistic Assessment of Bending Strength of Statically Indeterminate Reinforced Concrete Beams [Volume 35, Issue 4, 2022, Pages 837-844]
-
Nguyen, H. M.
In-situ Fine Basalt Soil Reinforced by Cement Combined with Additive DZ33 to Construct Rural Roads in Gia Lai Province, Vietnam [Volume 33, Issue 11, 2020, Pages 2137-2145]
-
Nguyen, V. T.
Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
-
Nguyen Van, Thang
Justification of the development system and measures to increase the productivity of wells in the oil field of the eastern part of the Pechora sea [(Articles in Press)]
-
Nguyen Vu, T.
Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
-
Niaboli Guilani, M.
A New Analog-based LO Harmonic Rejection Technique with Tunable Notch Frequency [Volume 31, Issue 11, 2018, Pages 1893-1902]
-
Niaei, Aligholi
Estimation of Kinetic Parameters of Coking Reaction Rate in Pyrolysis of Naphtha [Volume 17, Issue 4, 2004, Pages 319-332]
-
Niaki, S. T. A.
A Green Hazardous Waste Location-routing Problem Considering the Risks Associated with Transportation and Population [Volume 33, Issue 11, 2020, Pages 2272-2284]
-
Niaki, S.T.A.
A Procedure for Building Confidence Interval on the Mean of Simulation Output Data [Volume 7, Issue 2, 1994, Pages 111-118]
-
Niaki, S.T.A.
Confidence Interval Estimation of the Mean of Stationary Stochastic Processes: a Comparison of Batch Means and Weighted Batch Means Approach (TECHNICAL NOTE) [Volume 9, Issue 3, 1996, Pages 175-179]
-
Niaki, S.T.A.
A Multivariate Quality Control Procedure in Multistage Production Systems [Volume 10, Issue 4, 1997, Pages 191-208]
-
Niaki, S.T.A.
On the Performance of a Multivariate Control Chart in Multistage Environment [Volume 14, Issue 1, 2001, Pages 49-64]
-
Niaki, S.T.A.
Resource Investment Problem With Discounted Cash Flows [Volume 18, Issue 1, 2005, Pages 51-62]
-
Niaki, S.T.A.
Resource Investment Problem with Discounted Cash Flows [Volume 18, Issue 1, 2005, Pages 53-64]
-
Niaki, S.T.A.
A Generalized Linear Statistical Model Approach to Monitor Profiles [Volume 20, Issue 3, 2007, Pages 233-242]
-
Niaki, S.T.A.
A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
-
Niaki, S.T.A.
A New Acceptance Sampling Design Using Bayesian Modeling and Backwards Induction [Volume 25, Issue 1, 2012, Pages 45-54]
-
Niaki, S.T.A.
A Closed-Form Formula for the Fair Allocation of Gains in Cooperative N-Person Games [Volume 25, Issue 4, 2012, Pages 303-310]
-
Niaki, S.T.A.
Monitoring and Change Point Estimation of AR(1) Autocorrelated Polynomial Profiles [Volume 26, Issue 9, 2013, Pages 933-942]
-
Niaki, S.T.A.
Bayes Interval Estimation on the Parameters of the Weibull Distribution for Complete and Censored Tests [Volume 26, Issue 9, 2013, Pages 985-996]
-
Niaki, S.T.A.
Bayes Interval Estimation on the Parameters of the Weibull Distribution for Complete and Censored Tests [Volume 26, Issue 9, 2013, Pages 985-996]
-
Niaki, S.T.A.
A Novel Hybrid Approach to Analyze Cost of Quality: Balanced Scorecard and Fuzzy Logic [Volume 27, Issue 10, 2014, Pages 1611-1618]
-
Niaki, S.T.A.
Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
-
Niaki, S.T.A.
Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
-
Niaraki, Rahebeh
A Sub-threshold 9T SRAM Cell with High Write and Read ability with Bit Interleaving Capability [Volume 29, Issue 5, 2016, Pages 630-636]
-
Niaz Azari, M.
Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
-
Niaz Azari, M.
Optimal Rotor Fault Detection in Induction Motor Using Particle-Swarm Optimization Optimized Neural Network [Volume 31, Issue 11, 2018, Pages 1876-1882]
-
Niaz Azari, M.
Performance Improvement of a Slotted Solid Rotor Induction Motor with High Temperature Superconder Coating [Volume 32, Issue 5, 2019, Pages 693-700]
-
Niazi, S.
The Effect of Linear Change of Tube Diameter on Subcooled Flow Boiling and Critical Heat Flux [Volume 33, Issue 8, 2020, Pages 1590-1597]
-
Niazi, S.
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Niazi, Saeid
Estimation of LOS Rates for Target Tracking Problems using EKF and UKF Algorithms- a Comparative Study [Volume 28, Issue 2, 2015, Pages 172-179]
-
Niazi, Saeid
Improving the performance of flight control system in the presence of uncertainties and extreme changes in parameters using multiple model adaptive control [(Articles in Press)]
-
Nickabadi, S.
Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
-
Nickdel Teymoori, R.
Effects of Salinity, ph and Temperature on CMC Polymer and XC Polymer Performance (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 283-290]
-
Nickel, Stefan
Capacitated Single Allocation P-Hub Covering Problem in Multi-modal Network Using Tabu Search [Volume 29, Issue 6, 2016, Pages 797-808]
-
Nickpour, Mojdeh
Synthesis and Characteristics of Mesoporous Sol-gels for Lipase Immobilization [Volume 27, Issue 10, 2014, Pages 1495-1502]
-
Nicolaou, G. E.
The Comparison of Neutron Beams through 7Li(p,n) Reactions for the Design of a Thermal Neutron Radiography Facility using the MCNPX Code [Volume 33, Issue 11, 2020, Pages 2209-2214]
-
Niebles-Nuñez, E. E.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Nikaeen, R.
A Constraint Programming Approach to Solve Multi-skill Resource-constrained Project Scheduling Problem with Calendars [Volume 35, Issue 8, 2022, Pages 1579-1587]
-
Nikbakhsh, N.
Plant Classification in Images of Natural Scenes Using Segmentations Fusion [Volume 33, Issue 9, 2020, Pages 1743-1750]
-
Nikbakht, A. M.
Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
-
Nikbakht, Mehrdad
Designing a Model for Optimizing the Operation of Production Processes in Industry 4.0 [(Articles in Press)]
-
Nikbakht, R.
Response Spectra of Structures under Subway Induced Vibrations [Volume 31, Issue 12, 2018, Pages 2009-2015]
-
Nikbakht, Razieh
Analysis of Structural Vibrations due to Passage of Underground Trains [Volume 29, Issue 6, 2016, Pages 742-751]
-
Nikbakht Naser Abad, Sadegh
Technical Analysis of Conversion of A Steam Power Plant to Combined Cycle, Using Two Types of Heavy Duty Gas Turbines [Volume 28, Issue 5, 2015, Pages 781-793]
-
Nikfarjam, Alireza
Effect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1133-1138]
-
Nikfarjam, Alireza
Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
-
Nikghalb, Ebrahim
Multi-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [Volume 28, Issue 4, 2015, Pages 583-592]
-
Nikitasari, A.
Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
-
Nikitasari, A.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Nikitin, Vasiliy Igorevich
Analysis of the methodology for selecting the rheological model of cement slurry for determining the technological parameters of well casing [(Articles in Press)]
-
Nikkhah, H.
Experimental Investigation of the Effects of using Waste Rubber Ash on Mechanical Properties of Plain Concrete [Volume 36, Issue 3, 2023, Pages 450-456]
-
Nikkhoo, F
A Procurement-distribution Coordination Model in Humanitarian Supply Chain Using the Information-sharing Mechanism [Volume 31, Issue 7, 2018, Pages 1057-1065]
-
Niknafs, Soheil
Evaluation of Damage Distribution in Elements of Dual Frames [Volume 25, Issue 4, 2012, Pages 279-288]
-
Niknezhad, S.
Design and Evaluation a New Type of Semi-active Lower Limb with Knee Joint Booster [Volume 37, Issue 5, 2024, Pages 842-851]
-
Niknezhad, Sohrab
The biomechanical evaluation of a compliance joint Knee exoskeleton During a normal gait [(Articles in Press)]
-
Nikoi, Reza
Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
-
Nikoi, Reza
An Experimental Study on the Tensile Behaviors of Ultrasonic Welded T-joints for Polyamide Composite [Volume 29, Issue 12, 2016, Pages 1783-1790]
-
Nikolaev, N. I.
Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
-
Nikolaev, N. I
Improvement of Cement Properties Using a Single Multi-functional Polymer [Volume 31, Issue 1, 2018, Pages 181-187]
-
Nikolaev, Nikolay
Optimization of Cement Spacer Rheology Model Using Genetic Algorithm (RESEARCH NOTE) [Volume 29, Issue 1, 2016, Pages 127-131]
-
Nikolaev, Nikolay
Considerations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE) [Volume 29, Issue 9, 2016, Pages 1214-1218]
-
Nikolaichuk, L.
Diversification of Portfolio of International Oil and Gas Assets using Cluster Analysis [Volume 36, Issue 10, 2023, Pages 1783-1792]
-
Nikoohemmat, M. A.
Investigation on Physical and Mechanical Properties of High Density Polyethylene (PE100) Using Novel Catalyst [Volume 35, Issue 11, 2022, Pages 2205-2212]
-
Nikoohemmat, M. A.
Development of a Novel Super-active Ziegler-Natta Polyethylene Catalyst: Study on Structure, Performance and Application [Volume 37, Issue 1, 2024, Pages 14-24]
-
Nikpendar, P.
Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
-
Nikpour, M.
A Behavioural Model for Accurate Investigation of Noisy Lorenz Chaotic Synchronization Systems [Volume 36, Issue 8, 2023, Pages 1502-1508]
-
Nikravesh, Morteza
Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
-
Nikulicheva, T. B.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
Nikzad, E.
Multi-commodity Multimodal Splittable Logistics Hub Location Problem with Stochastic Demands [Volume 31, Issue 11, 2018, Pages 1935-1942]
-
Nikzad, L.
Synthesise of CoFe2O4-Polyaniline Nanocomposite and Evaluation of its Magnetic Properties [Volume 22, Issue 4, 2009, Pages 381-386]
-
Nikzad, L.
Preparation of Cobalt Oxide/Zinc Oxide Nanocomposite [Volume 23, Issue 2, 2010, Pages 133-138]
-
Nikzad, L.
Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
-
Nikzad, M.
Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
-
Nikzad, M.
Separation of Curcumin from Curcuma longa L. and its Conjugation with Silica Nanoparticles for Anti-cancer Activities [Volume 31, Issue 11, 2018, Pages 1803-1809]
-
Nikzad, M.
Well-to-wheel Energy Consumption and CO2 Emission Comparison of Electric and Fossil Fuel Buses: Tehran Case Study [Volume 37, Issue 3, 2024, Pages 567-578]
-
Nikzadfar, K.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Nipanikar, S. R.
Tool Life of Uncoated and Coated Inserts during Turning of Ti6Al4V-ELI under Dry and Minimum Quantity Lubrication Environments [Volume 36, Issue 2, 2023, Pages 191-198]
-
Niranjana, S. J.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Nobakht, Maryam
A Sub-threshold 9T SRAM Cell with High Write and Read ability with Bit Interleaving Capability [Volume 29, Issue 5, 2016, Pages 630-636]
-
Nobari, Amir Hossein
Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 263-268]
-
Nobarian, M. A.
Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
-
Noferesti, H.
Bolt Pre-tension Effect on Performance of Bolted Extended End-plate Moment Connections under Cyclic Loading [Volume 35, Issue 3, 2022, Pages 531-543]
-
Noghani, M. T.
Effect of Various Microstructures Obtained from Heat Treatment on Machinability Behavior of Ti-6Al-4V Alloy [Volume 35, Issue 1, 2022, Pages 184-190]
-
Noie, S.H.
Thermal Analysis of Shell-Side Flow of Shell-and-Tube Heat Exchanger Using Experimental and Theoretical Methods [Volume 13, Issue 1, 2000, Pages 15-26]
-
Noie, S.H.
Kinetics of Benzyl Chloride Production in a Bench Reactor Under Pressure with Stirrer (TECHNICAL NOTE) [Volume 15, Issue 3, 2002, Pages 235-240]
-
Noie, S.H.
Experimental Investigation of Boiling and Condensation Heat Transfer of a Two Phase Closed Thermosyphon [Volume 18, Issue 1, 2005, Pages 1-10]
-
Noie, S.H.
Experimental Investigation of Boiling and Condensation Heat Transfer of a two Phase Closed Thermosyphon [Volume 18, Issue 1, 2005, Pages 37-43]
-
Noori, A.
Using Sliding Mode Controller and Eligibility Traces for Controlling the Blood Glucose in Diabetic Patients at the Presence of Fault [Volume 33, Issue 2, 2020, Pages 257-268]
-
Noori, E.
Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
-
Noori, Hamid Reza
Length Scale Effect on Vibration Analysis of Functionally Graded Kirchhoff and Mindlin Micro-Plates [Volume 27, Issue 3, 2014, Pages 431-440]
-
Noori, Hossein
Subcritical Water Extraction of Essential Oils from Matricaria Chamomilla L. [Volume 26, Issue 5, 2013, Pages 489-494]
-
Noori, Hossein
A Protection for Loss of Excitation in Synchronous Generator in the presence of series compensation capacitor [(Articles in Press)]
-
Noori, Mohsen
Inhibitive Assesment of Stearamide as a Corrosion Inhibitor for Mild Steel in HCl Solution [Volume 25, Issue 2, 2012, Pages 119-126]
-
Noori, N.
Hybrid Massive MIMO Channel Model Based on Edge Detection of Interacting Objects and Cluster Concept [Volume 35, Issue 2, 2022, Pages 471-480]
-
Noori, R.
Integrated Inspection Planning and Preventive Maintenance for a Markov Deteriorating System Under Scenario-based Demand Uncertainty [Volume 33, Issue 4, 2020, Pages 607-620]
-
Noori, W. O.
Esterification Reaction Kinetics Using Ion Exchange Resin Catalyst by Pseudo-Homogenous and Eley-Ridel Models [Volume 31, Issue 8, 2018, Pages 1172-1179]
-
Noori, Y.
Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
-
Noori-daryan, Mahsa
Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
-
Noori shirazi, Y.
Improving 3-D Imaging Breast Cancer Diagnosis Systems Using a New Method for Placement of Near-infrared Sources and Detectors [Volume 33, Issue 6, 2020, Pages 1105-1113]
-
Noorossana, R.
Quality Improvement Through Multiple Response Optimization (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 49-58]
-
Nooruan, T
Performance Evaluation of Hybrid Coagulation/Nanofiltration Process for AT-POME Treatment [Volume 31, Issue 8, 2018, Pages 1430-1436]
-
Noorzad, A.
Vertical and Rocking Impedances for Surface Rigid Foundation Resting on a Transversely Isotropic Half-Space [Volume 15, Issue 1, 2002, Pages 1-9]
-
Noorzad, A.
Fundamental Steady state Solution for the Transversely Isotropic Half Space [Volume 16, Issue 2, 2003, Pages 105-122]
-
Noorzad, A.
Wave Equations in Transversely Isotropic Media in Terms of Potential Functions (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 125-132]
-
Noorzad, A.
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Noorzaie, J.
Interactive Analysis of Space Frame Raft Soil System [Volume 8, Issue 3, 1995, Pages 133-146]
-
Noorzaie, J.
Concepts and Application of Three Dimensional Infinite Elements to Soil Structure-Interaction Problems [Volume 9, Issue 3, 1996, Pages 131-142]
-
Noorzaie, J.
Seismic Response of the Kavar Concrete Face Rockfill Dam (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 333-346]
-
Noorzaie, J.
Numerical Modeling of Railway Track Supporting System using Finite-Infinite and Thin Layer Elements [Volume 22, Issue 2, 2009, Pages 131-144]
-
Nordin, M. F. M
Total Phenolic Content, Total Flavonoid Content and Radical Scavenging Activity from Zingiber zerumbet Rhizome using Subcritical Water Extraction [Volume 31, Issue 8, 2018, Pages 1421-1429]
-
Nordin, N. A. H. M.
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 Co-polyimide [Volume 31, Issue 8, 2018, Pages 1356-1363]
-
Noroozi, A.
Coordinating Order Acceptance and Batch Delivery for an Integrated Supply Chain Scheduling [Volume 30, Issue 5, 2017, Pages 700-709]
-
Noroozi, Amir
A Reliability based Modelling and Optimization of an Integrated Production and Preventive Maintenance Activities in Flowshop Scheduling Problem [Volume 28, Issue 12, 2015, Pages 1774-1781]
-
Noroozi, Mohammad javad
Heat Recirculation Effect on the Structure of Wood Dust Flame Propagation [Volume 25, Issue 2, 2012, Pages 143-150]
-
Noroozi, Mohammad javad
Effect of Heat Recirculation in Biomass Flame Stability within a Cylindrical Micro-Combustor (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 454-459]
-
Noroozi, Mohammad javad
Investigation of the Effects of Non-Linear and Non-Homogeneous Non-Fourier Heat Conduction Equations on Temperature Distribution in a Semi-Infinite Body [Volume 28, Issue 12, 2015, Pages 1802-1807]
-
Noroozinejad Farsangi, E.
Assessment of Structure-Specific Fragility Curves for Soft Storey Buildings Implementing IDA and SPO Approaches [Volume 31, Issue 12, 2018, Pages 2016-2021]
-
Noroozinejad Farsangi, E.
Statistical Prediction of Probable Seismic Hazard Zonation of Iran Using Self-organized Artificial Intelligence Model [Volume 32, Issue 4, 2019, Pages 467-473]
-
Noroozinejad Farsangi, E.
Seismic Response of Building Structures with Sliding Non-structural Elements [Volume 33, Issue 2, 2020, Pages 205-212]
-
Noroozinejad Farsangi, E.
Eco-friendly Hybrid Concrete Using Pozzolanic Binder and Glass Fibers [Volume 33, Issue 7, 2020, Pages 1183-1191]
-
Noroozinejad Farsangi, E.
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Noroozinejad Farsangi, E.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Noroozinejad Farsangi, E.
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Noroozinejad Farsangi, E.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Noroozinejad Farsangi, E.
Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
-
Noroozinejad Farsangi, E.
Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures [Volume 36, Issue 3, 2023, Pages 594-603]
-
Noroozinejad Farsangi, E.
Enhancing Seismic Design of Non-structural Components Implementing Artificial Intelligence Approach: Predicting Component Dynamic Amplification Factors [Volume 36, Issue 7, 2023, Pages 1211-1218]
-
Noroozinejad Farsangi, E.
A Parametric Study on Improved Reduced Beam Section Connections with Post-tensioning to Enhance Seismic Resilience [Volume 36, Issue 10, 2023, Pages 1857-1867]
-
Noroozinejad Farsangi, E.
Experimental Investigation of Brick-Slabs: Evaluation of the Performance and Ductility of Various Brick Materials [Volume 36, Issue 9, 2023, Pages 1636-1644]
-
Noroozinejad Farsangi, Ehsan
Direct Displacement Based Design of Reinforced Concrete Elevated Water Tanks Frame Staging [Volume 32, Issue 10, 2019, Pages 1395-1406]
-
Norouzi, A. H.
Effects of Multiple Structure-soil-structure Interactions Considering the Earthquake Waveform and Structures Elevation Effects [Volume 33, Issue 5, 2020, Pages 744-752]
-
Norouzi, L.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Norouzi, M.
Acid Hydrolysis of Pretreated Palm Oil Lignocellulosic Wastes [Volume 20, Issue 2, 2007, Pages 147-156]
-
Norouzi, P.
Determination of Riboflavin by Nanocomposite Modified Carbon Paste Electrode in Biological Fluids Using Fast Fourier Transform Square Wave Voltammetry [Volume 33, Issue 9, 2020, Pages 1696-1702]
-
Norouzi, S.
A New Variable Frequency Zero Voltage Switching Control Method for Boost Converter Operating in Boundary Conduction Mode [Volume 33, Issue 11, 2020, Pages 2222-2232]
-
Norouzi, S.
Investigating the Effect of Clearance Distance between the Floor of a High-speed Train and Ground on Aerodynamic Forces in Presence of Side Wind [Volume 36, Issue 4, 2023, Pages 604-614]
-
Norouzian, Musa
Multi-objective Optimization of Hybrid Carbon/Glass Fiber Reinforced Epoxy Composite Automotive Drive Shaft [Volume 28, Issue 4, 2015, Pages 583-592]
-
Norouzi Sahraei, H.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Norouznejad Jelodar, Maryam
Design of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane [Volume 29, Issue 3, 2016, Pages 321-327]
-
Norozpour Niazi, A.
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Noruzi, S.
Fabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel [Volume 30, Issue 7, 2017, Pages 1048-1053]
-
Noshadi, N.
Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
-
Nosier, A.
Three Dimensional Analysis of Laminated Cylindrical Panels with Piezoelectric Layers [Volume 19, Issue 1, 2006, Pages 61-72]
-
Nosrati, S. A.
Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
-
Nosratollahi, M.
Modified L1 Adaptive Control Design for Satellite FMC Systems with Actuators Time Delay [Volume 31, Issue 11, 2018, Pages 1982-1990]
-
Nosratollahi, M.
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Nouaouria, M. S.
Probabilistic Approach to the Seismic Vulnerability of RC Frame Structures by the Development of Analytical Fragility Curves [Volume 30, Issue 7, 2017, Pages 945-954]
-
Nouraldeen, Messan
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Nourali, H.
A New Cost Model for Estimation of Open Pit Copper Mine Capital Expenditure [Volume 32, Issue 2, 2019, Pages 346-353]
-
Nouranbakhsh, M.
Improvement of Sand Soil with Bio-micropiles and Bio-grout Injection in Reinforced Soils [Volume 37, Issue 6, 2024, Pages 1076-1084]
-
Nourbakhsh Amiri, Z.
Subcritical Water Extraction of Bioactive Compounds from Ginger (Zingiber officinale Roscoe) [Volume 31, Issue 12, 2018, Pages 1991-2000]
-
Nourghassemi, H.
Numerical Hydrodynamic Performance of the Stepped Planing Craft and Its Step Height Effect (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 602-607]
-
Nouri, Iraj
Applying fuzzy UTASTAR for sustainable supplier selection in Iran's construction industry [(Articles in Press)]
-
Nouri, K.
Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
-
Nouri, M.
A New Texture Segmentation Method with Energy-driven Parametric Active Contour Model Based on Jensen-Tsallis Divergence [Volume 35, Issue 7, 2022, Pages 1257-1267]
-
Nouri, M. D.
Effect of Impact Parameters on Explosive Welding of Tube to a Plug [Volume 15, Issue 3, 2002, Pages 285-298]
-
Nouri, N.
Joint Allocation of Computational and Communication Resources to Improve Energy Efficiency in Cellular Networks [Volume 32, Issue 11, 2019, Pages 1627-1633]
-
Nouri, S
Automotive Vendor's Performance Evaluation and Improvement Plan Presentation by Using a Data Envelopment Analysis [Volume 31, Issue 2, 2018, Pages 374-381]
-
Nouri, S. M. M.
Textural and Structural Characterizations of Mesoporous Chitosan Beads for Immobilization of Alpha-Amylase: Diffusivity and Sustainability of Biocatalyst [Volume 32, Issue 2, 2019, Pages 207-216]
-
Nouri Borujerdi, A.
Numerical Evaluation of Hydraulic Fracturing Pressure in a Two-Phase Porous Medium [Volume 15, Issue 2, 2002, Pages 125-134]
-
Nouri Borujerdi, A.
Effects of Slip Condition on the Characteristic of Flow in Ice Melting Process [Volume 18, Issue 3, 2005, Pages 253-261]
-
Nouri Borujerdi, A.
Flow Visualization Around a Non - Circular Tube [Volume 19, Issue 1, 2006, Pages 73-82]
-
Nouri Koupaei, M.
A Scheduling Model of Flexible Manufacturing System to Reduce Waste and Earliness/Tardiness Penalties [Volume 30, Issue 5, 2017, Pages 749-757]
-
Nouri Koupaei, Mehrdad
Optimizing Flexible Manufacturing System: A Developed Computer Simulation Model [Volume 29, Issue 8, 2016, Pages 1112-1119]
-
Nourmohamadi, Hosein
A two-degree-of-freedom tool holder mechanism for real-time adjustment of the tool angles in turning process [(Articles in Press)]
-
Nourmohammadi, Abolghasem
Electrophoretic Synthesis of Titanium Oxide Nanotubes [Volume 25, Issue 4, 2012, Pages 343-350]
-
Nourmoradi, Heshmatollah
Hexadecyl Trimethyl Ammonium Bromide-Modified Montmorillonite as a Low-Cost Sorbent for the Removal of Methyl Red from Liquid-Medium [Volume 29, Issue 1, 2016, Pages 60-67]
-
Nourollahi, Mostafa
Modified Structure Function Model Based on Coherent Structures [Volume 26, Issue 5, 2013, Pages 523-532]
-
Nourouzi, S.
Corrosion Behavior of TiN/CrN Nanoscale Multi-layered Coating in Ringer's Solution [Volume 33, Issue 2, 2020, Pages 329-336]
-
Nourzadeh, Farzin
Development of a Model for Locating Hubs in a Competitive Environment under Uncertainty: A Robust Optimization Approach [Volume 33, Issue 1, 2020, Pages 124-133]
-
Novikova, Anna
Land assessment in mining regions considering ecology [(Articles in Press)]
-
Novinrooz, A.J
EFFECT OF INORGANIC HYBRID LiBr ON THE SILICA MATRIX XEROGELS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 51-56]
-
Novinrooz, J.
Preparation and Study of Molecular Structure of Copper Ions Doped in a Silica Xerogel Matrix [Volume 19, Issue 1, 2006, Pages 53-60]
-
Nozari, H.
A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
-
N. Shirazi, Abdolreza
Hierarchical Control Strategy of CPL-based DC MGs using a New DAPI Secondary Controller [(Articles in Press)]
-
N. Shirazi, Abdolreza
A DFT Based Secondary Average Controller for Voltage/Frequency Regulation and Active/Reactive Power Sharing of AC Microgrids [(Articles in Press)]
-
Nugraha, H.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Nugraha, R. A.
Characteristics of PANi/rGO Nanocomposite as Protective Coating and Catalyst in Dye-sensitized Solar Cell Counter Electrode Deposited on AISI 1086 Steel Substrate [Volume 31, Issue 10, 2018, Pages 1741-1748]
-
Nuhaa, F.
Graphene Based Membrane Modified Silica Nanoparticles for Seawater Desalination and Wastewater Treatment: Salt Rejection and Dyes [Volume 36, Issue 4, 2023, Pages 698-708]
-
Nuraini, L.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Nuraini, L.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Nurani Zulkifli, S
Analysis of Bacterial Contaminant in Pasir Gudang, Johor Tap Water Supply–Varies pH Value Observation [Volume 31, Issue 8, 2018, Pages 1455-1463]
-
Nurbaiti, .
Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
-
Nurbaiti, N.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Nurbaiti, N.
Synthesis of Hydroxyapatite Bioceramic from Cuttlefish Shell Waste and Coral Using Microwave Hydrothermal [Volume 37, Issue 9, 2024, Pages 1755-1762]
-
Nurrochmad, F.
Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
-
Nursin, A.
Development of Work Breakdown Structure for Stadium Work as Project Guideline and Standard [Volume 35, Issue 7, 2022, Pages 1291-1299]
-
Nutskova, M. V.
Developments Made in the Field of Drilling Fluids by Saint Petersburg Mining University [Volume 33, Issue 4, 2020, Pages 702-711]
-
Nwigbo, Solomon C
Optimization of Hardness Strengths Response of Plantain Fibres Reinforced Polyester Matrix Composites (PFRP) Applying Taguchi Robust Design [Volume 26, Issue 1, 2013, Pages 1-12]
O
-
Obied, N. A.
Experimental Study for Protection of Piers Against Local Scour Using Slots [Volume 32, Issue 2, 2019, Pages 217-222]
-
Obruch, H.
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Ogbaei, M.
Forward Position Kinematics of a Parallel Manipulator with New Architecture [Volume 14, Issue 3, 2001, Pages 239-246]
-
Oggu, P.
Performance Assessment of Ductile Detailing Code-Based Reinforced Concrete Special Moment Resisting Frames [Volume 36, Issue 3, 2023, Pages 457-464]
-
Oggu, Praveen
Influence of Real Ground Motion Records in Performance Assessment of RC Buildings [Volume 32, Issue 12, 2019, Pages 1745-1752]
-
Ojaghi, M.
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Ojedokun, I. A.
Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
-
Okonkwo, Ugochukwu
Pollutants Emissions of Filling Stations and Their Impact on the Air Quality (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 949-955]
-
Oladapo, Bankole I.
Electrical Energy Demand Modeling of 3D Printing Technology for Sustainable Manufacture [Volume 29, Issue 7, 2016, Pages 954-961]
-
Oladi, Z.
Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
-
Olapade, O. T.
Refractive Index Perception and Prediction of Radio wave through Recursive Neural Networks using Meteorological Data Parameters [Volume 35, Issue 4, 2022, Pages 810-818]
-
Olazar, M.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Oliaiy, Ali
Introducing Padded Wall to Reduce Sloshing Induced Wall Pressure in Water Storage Tanks [Volume 27, Issue 12, 2014, Pages 1823-1831]
-
Oliazade, M.
Beneflciation Studies of Bama Oxidized Lead and Zinc Ore [Volume 10, Issue 3, 1997, Pages 173-180]
-
Oloomi Buygi, M.
Three New Systematic Approaches for Computing Heffron-Phillips Multi-Machine Model Coefficients (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 43-52]
-
Oloomi Buygi, M.
Transmission Planning in Deregulated Environments [Volume 15, Issue 3, 2002, Pages 245-255]
-
Oloomi Buygi, M.
Impacts of Premium Bounds on the Operation of Put Option and Day-ahead Electricity Markets [Volume 30, Issue 11, 2017, Pages 1752-1761]
-
Omaran, S. M.
Integrating Building Information Modeling and Virtual Reality to Develop Real-time Suitable Cost Estimates using Building Visualization [Volume 36, Issue 5, 2023, Pages 858-869]
-
Omehtalb, A.
Analytic Solution for Hypersonic Flow Past a Slender Elliptic Cone Using Second-Order Perturbation Approximations [Volume 13, Issue 4, 2000, Pages 23-34]
-
Omidi, R.
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Omidi Kashani, B.
Development of a Mathematical Model for Prediction of Pollutants Emission in D. I. Diesel Engines [Volume 11, Issue 1, 1998, Pages 37-42]
-
Omidi Kashani, B.
Prediction of Major Pollutants Emission in Direct-Injection Dual-Fuel Diesel And Natural-Gas Engines [Volume 13, Issue 2, 2000, Pages 55-68]
-
Omidkhah, M.
Estimation of Kinetic Parameters of Coking Reaction Rate in Pyrolysis of Naphtha [Volume 17, Issue 4, 2004, Pages 319-332]
-
Omidvar, A.
Prediction of Noise Transmission Loss and Acoustic Comfort Assessment of a Ventilated Window using Statistical Energy Analysis [Volume 32, Issue 3, 2019, Pages 451-459]
-
Omidvar, A.
Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
-
Omidvari, Arash
Approximate Closed-form Formulae for Buckling Analysis of Rectangular Tubes under Torsion [Volume 28, Issue 8, 2015, Pages 1226-1232]
-
Ommi, F.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Omotayo, O. O.
Challenges and Prospects of Widespread Adoption of Pozzolans for Building Construction: A Statistical Assessment [Volume 35, Issue 10, 2022, Pages 1929-1940]
-
Omrani, R.
New Steel Divergent Braced Frame Systems for Strengthening of Reinforced Concrete Frames [Volume 33, Issue 10, 2020, Pages 1886-1896]
-
Ong, C. S
Zwitterion Embedded Thin Film Composite Membrane for Oily Wastewater Treatment [Volume 31, Issue 8, 2018, Pages 1464-1472]
-
Onukwuli, Okechukwu
Nitric Acid-activated Nteje Clay: Structural and Bleaching Properties (RESEARCH NOTE) [Volume 26, Issue 5, 2013, Pages 495-500]
-
Onur, T. H.
Modelling Departure Time, Destination and Travel Mode Choices by Using Generalized Nested Logit Model: Discretionary Trips [Volume 33, Issue 2, 2020, Pages 186-197]
-
Onwuamaze, Ikechukwu
Pollutants Emissions of Filling Stations and Their Impact on the Air Quality (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 949-955]
-
Oraee Mirzamani, S. K.
Optimization of Longwall Panel Location with Regards to the Gradient of Coal Seams (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 89-98]
-
Orangi, R.
Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process [Volume 31, Issue 6, 2018, Pages 877-885]
-
Oraon, M
Predicting Force in Single Point Incremental Forming by Using Artificial Neural Network [Volume 31, Issue 1, 2018, Pages 88-95]
-
Orji, Ijioma
Pollutants Emissions of Filling Stations and Their Impact on the Air Quality (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 949-955]
-
Orvatinia, Mohammad
Thickness Dependence of Sensitivity in Thin Film Tin Oxide Gas Sensors Deposited by Vapor Pyrolysis [Volume 16, Issue 1, 2003, Pages 33-40]
-
Osanloo, M
Multiple Destination Influence on Production Scheduling in Multi-element Mines [Volume 31, Issue 1, 2018, Pages 173-180]
-
Osanloo, M.
Determination of Blasthole Parameters Based on Field Results (TECHNICAL NOTE). [Volume 10, Issue 4, 1997, Pages 229-234]
-
Osanloo, M.
Using 2D Lerchs and Grossmann Algorithm to Design Final Pit Limits of Sungun Copper Deposit of Iran (TECHNICAL NOTE) [Volume 13, Issue 4, 2000, Pages 81-89]
-
Osanloo, M.
A Chance Constrained Integer Programming Model for Open Pit Long-Term Production Planning [Volume 21, Issue 4, 2008, Pages 407-418]
-
Osanloo, M.
An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
-
Osanloo, M.
Resilient Decision Making in Open Pit Short-term Production Planning in Presence of Geologic Uncertainty [Volume 29, Issue 7, 2016, Pages 1022-1028]
-
Osanloo, M.
A New Cost Model for Estimation of Open Pit Copper Mine Capital Expenditure [Volume 32, Issue 2, 2019, Pages 346-353]
-
Osanloo, M.
A New Developed Model to Determine Waste Dump Site Selection in Open Pit Mines: An Approach to Minimize Haul Road Construction Cost [Volume 33, Issue 7, 2020, Pages 1413-1422]
-
Osanloo, M.
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Osanloo, M.
A New Comprehensive Model for Integrating Environmental, Economic, and Social Performance of Deep and Large-scale Open-Pit Copper Mines [Volume 37, Issue 1, 2024, Pages 1-13]
-
Osanloo, Morteza
An Uncertainty-based Transition from Open Pit to Underground Mining [Volume 32, Issue 8, 2019, Pages 1218-1224]
-
Oskoie, Mohammad Mahdi
Mössbauer and Magnetic Studies of Iron-Zeolite and Iron-Cobalt Zeolite Catalysts Used in Synthesis Gas Conversion [Volume 20, Issue 3, 2007, Pages 263-274]
-
Oskoie, Mohammad Mahdi
Magnetic Studies of Fine Fe And Co Species Formed in Fe/Zeolite Catalysts [Volume 21, Issue 2, 2008, Pages 173-180]
-
Oskorouchi, A. M.
Effects of Degree of Consolidation and Anisotropic Consolidation Stresses on Shear Modulus and Damping Ratio of Cohesive Soils at Low Strain [Volume 13, Issue 1, 2000, Pages 27-36]
-
Osman, H.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
Ostadhossein, R
Blood Flow Simulation in an Aorta with a mild coarctation Using Magnetic Resonance Angiography and Finite Volume Method [Volume 31, Issue 4, 2018, Pages 673-678]
-
Ostadi, Bakhtiar
Reliability and Risk Assessment of Electric Cable Shovel at Chadormalu Iron Ore Mine in Iran [Volume 33, Issue 1, 2020, Pages 170-177]
-
Ostovari, Amir Hossein
Design of a New Instrument for Measuring Frictional Properties of Woven Fabrics [Volume 24, Issue 4, 2011, Pages 387-392]
-
Ostrovskaya, L. Y.
The Study of Thermodynamic Surface and Contact Characteristics by a New Method of Simultaneous Thermooptical Analysis (TECHNICAL NOTES). [Volume 10, Issue 1, 1997, Pages 55-59]
-
Othman, M .H. D
Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
-
Othman, M. H. D
Preliminary Characterization of Corn Cob Ash as an Alternative Material for Ceramic Hollow Fiber Membrane (CHFM/CCA) [Volume 31, Issue 8, 2018, Pages 1389-1397]
-
Othman, N
D2EHPA-Sulfuric Acid System for Simultaneous Extraction and Recovery of Nickel Ions via Supported Liquid Membrane Process [Volume 31, Issue 8, 2018, Pages 1373-1380]
-
Othuman Mydin, Md Azree
Influence of High Temperatures on Flexural Strength of Foamed Concrete Containing Fly Ash and Polypropylene Fiber [Volume 26, Issue 2, 2013, Pages 117-126]
-
Otroshi Shahreza, H.
Predicting the Empirical Distribution of Video Quality Scores Using Recurrent Neural Networks [Volume 33, Issue 5, 2020, Pages 984-991]
-
Ouada, L.
Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator [Volume 33, Issue 2, 2020, Pages 248-256]
-
Oualllam, S.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Outassafte, O.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Outokesh, M.
Uranium Ions Removal Using Amberlite CG-400 Anion Exchanger Resin in the Presence of Sulfate Anions [Volume 29, Issue 6, 2016, Pages 728-734]
-
Outokesh, Mohammad
Extraction of Molybdenum (VI) and Vanadium (V) from Nitrate Solutions Using Coupling of Acid and Solvating Extractants (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1366-1371]
-
Owlia, Mohammad Saleh
Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
-
Owlia, Mohammad Saleh
Unravelling the Dynamics: Social Media, Absorptive Capacity, and Organizational Performance [(Articles in Press)]
-
Owlia, M. S.
Designing an Economic Repetitive Sampling Plan in the Presence of Two Markets [Volume 30, Issue 7, 2017, Pages 1017-1028]
-
Owlia, M. S.
Enhancing Fault Detection in Image Analysis: A Combined Wavelet-Fourier Technique for Advancing Manufacturing Quality Control [Volume 37, Issue 2, 2024, Pages 387-401]
-
Owoyemi, J. M.
Bending Strength Evaluation of Glulam Beams Made from Selected Nigerian Wood Species [Volume 35, Issue 11, 2022, Pages 2120-2129]
-
Ozgoli, H. A.
Simulation of a GEF5 Gas Turbine Power Plant Using Fog Advanced Cycle and a Systematic Approach to Calculate Critical Relative Humidity [Volume 33, Issue 11, 2020, Pages 2356-2364]
P
-
P, Neelamegam
Drying Kinetics of Muscat Grapes in a Solar Drier with Evacuated Tube Collector [Volume 27, Issue 5, 2014, Pages 811-818]
-
P, PALANISAMY
Cutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools [Volume 28, Issue 7, 2015, Pages 1074-1081]
-
Pachideh, Ghasem
Performance of Porous Pavement Containing Different Types of Pozzolans [Volume 32, Issue 9, 2019, Pages 1277-1283]
-
Padmaja, P.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Pahlavan, H.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Pahlavaninezhad, M.
An Adaptive Nonlinear Controller for Speed Sensorless PMSM Taking the Iron Loss Resistance into Account (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 151-160]
-
Pak, A.
Numerical Evaluation of Hydraulic Fracturing Pressure in a Two-Phase Porous Medium [Volume 15, Issue 2, 2002, Pages 125-134]
-
Paknia, D
A New Single-phase Symmetrical Cascade Multilevel Inverter with Low Number of Power Switches [Volume 31, Issue 8, 2018, Pages 1228-1233]
-
Pakshir, M.
Corrosion of Concrete in Sea Water (RESEARCH NOTE) [Volume 12, Issue 3, 1999, Pages 189-194]
-
Pakzad, Hadiseh
Encapsulation of Food Components and Bioactive Ingredients and Targeted Release [Volume 33, Issue 1, 2020, Pages 1-11]
-
Pakzad.Q.H, Q. Hadiseh
Encapsulation of Peppermint Oil with Arabic Gum-gelatin by Complex Coacervation Method [Volume 26, Issue 8, 2013, Pages 807-814]
-
Pal, M.
Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
-
Pal, Mahesh
STAGE-DISCHARGE MODELING USING SUPPORT VECTOR MACHINES [Volume 25, Issue 1, 2012, Pages 1-10]
-
Pal, S.
Comparative Performance Study of Tuned Liquid Column Ball Damper for Excessive Liquid Displacement on Response Reduction of Structure [Volume 33, Issue 5, 2020, Pages 753-759]
-
Palaev, A. G.
A Leak Detection Method for Underground Polyethylene Gas Pipelines Using Simulation Software Ansys Fluent [Volume 37, Issue 8, 2024, Pages 1615-1621]
-
Palaev, Aleksander Grigorievich
Ultrasonic treatment of a welded joint from the external, internal and two sides on reducing residual welding stresses [(Articles in Press)]
-
Palaev G., A.
Method for Assessing Damage to Gas Distribution Network Pipelines based on Nonlinear Guided Wave [Volume 37, Issue 5, 2024, Pages 852-859]
-
Palanivelu, S.
Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution [Volume 35, Issue 8, 2022, Pages 1479-1487]
-
Palanivelu, S.
Energy Harvesting from Vibrating Cantilever Structure of Different Base Materials using Piezoelectric Material: Theoretical and Experimental Approach [Volume 36, Issue 1, 2023, Pages 152-162]
-
Panahi, Alireza
Comparison of Seismic Behavior of Buckling-restrained Braces and Yielding Brace System in Irregular and Regular Steel Frames under Mainshock and Mainshock-Aftershock [Volume 32, Issue 11, 2019, Pages 1591-1609]
-
Panahi, P.
Low Embodied Carbon and Energy Materials in Building Systems: A Case Study of Reinforcing Clay Houses in Desert Regions [Volume 36, Issue 8, 2023, Pages 1409-1428]
-
Panahi Leavoli, R.
Investigation on Formability of Tailor-Welded Blanks in Incremental Forming [Volume 33, Issue 5, 2020, Pages 906-915]
-
Pandey, R.
Voltage Differencing Buffered Amplifier based Voltage Mode Four Quadrant Analog Multiplier and its Applications [Volume 32, Issue 4, 2019, Pages 528-535]
-
Pandey, R.
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
PANDIAN, CHENTHUR PANDIAN
Modified Bi-directional AC/DC Power Converter with Power Factor Correction [Volume 25, Issue 3, 2012, Pages 175-180]
-
Pang, Y. L
Improving Hydrophilicity of Polyethersulfone Membrane Using Silver Nanoparticles for Humic Substances Removal [Volume 31, Issue 8, 2018, Pages 1364-1372]
-
Pangavhane, Dilip
Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
-
Pangemanan, D.
Study on the Application of Sustainable Construction in the Development of the Likupang Special Economic Zone [Volume 36, Issue 1, 2023, Pages 50-59]
-
Panosyan, Hovik
Purification and Characterization of a Novel Thermostable and Acid Stable α-Amylase from Bacillus Sp. Iranian S1 [Volume 26, Issue 8, 2013, Pages 815-820]
-
Pant, Anjali
Elastico-Viscous Flow between Two Rotating Discs of Different Transpiration for High Reynolds Numbers (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 115-122]
-
Pant, Anjali
A Computational Approach to the Flow of Walter’s Liquid B′ through Annulus of Coaxial Porous Circular Cylinders for High Suction Parameter (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 119-124]
-
Pant, D.
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Pappula, L.
Design and Optimization of High-gain Series and Parallel-fed Array Antennas for Enhanced Gain and Front-to-back Ratio in X-Band Applications [Volume 37, Issue 3, 2024, Pages 546-555]
-
Paramashivaiah, B. M.
Studies on Effect of Injection Timing of Graphene Nanoparticles Blended Simarouba Biodiesel Blend on CI Engine [Volume 30, Issue 8, 2017, Pages 1205-1214]
-
Paran, K.
FDTD Analysis of Top-Hat Monopole Antennas Loaded with Radially Layered Dielectric [Volume 17, Issue 3, 2004, Pages 251-262]
-
Paran, K.
A Study of Electromagnetic Radiation from Monopole Antennas on Spherical-Lossy Earth Using the Finite-Difference Time-Domain Method [Volume 18, Issue 1, 2005, Pages 387-390]
-
Paran, Kian
A Novel Volcano Smoke Antenna with Optimal Shape [Volume 26, Issue 3, 2013, Pages 263-276]
-
Parandeh Motlagh, F.
Detecting Fake Websites Using Swarm Intelligence Mechanism in Human Learning [Volume 31, Issue 10, 2018, Pages 1642-1650]
-
Parastvand, Hossein
Stability and Performance Attainment with Fixed Order Controller Using Frequency Response [Volume 28, Issue 4, 2015, Pages 553-560]
-
Pardoyo, P.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Parekh, V. P.
An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It [Volume 37, Issue 3, 2024, Pages 556-566]
-
Parghi, Anant
Numerical investigation of FRP retrofitted short RC circular columns under concentric compressive load [(Articles in Press)]
-
Parhizkar, Hamid
Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
-
Parhizkar, Hamid
Simulation of Strap-On Boosters Separation in the Atmosphere [Volume 28, Issue 2, 2015, Pages 164-171]
-
Parimi, C.
Seismic Response of Building Structures with Sliding Non-structural Elements [Volume 33, Issue 2, 2020, Pages 205-212]
-
Parivar, H.
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Parivar, H.
Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
-
Park, D. W.
Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
-
Parkhe, S
Design and Analysis of Pressure Vessel Subjected to Pressure-temperature Variation (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 58-64]
-
Parnak, A.
A Novel Image Splicing Detection Algorithm Based on Generalized and Traditional Benford’s Law [Volume 35, Issue 4, 2022, Pages 626-634]
-
Parpaei, Mohammad
Eagle Strategy Based Maximum Power Point Tracker for Fuel Cell System [Volume 28, Issue 4, 2015, Pages 529-536]
-
Parsa, M
Optimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation [Volume 31, Issue 2, 2018, Pages 299-306]
-
Parsa, Mostafa
Introducing the Time Value of Money in a Non-consignment Vendor Managed Inventory Model [Volume 29, Issue 5, 2016, Pages 637-645]
-
Parsafar, M.
Nitinol Spinal Vertebrae: A Favorable New Substitute [Volume 32, Issue 6, 2019, Pages 842-851]
-
Parsapour, Masoud
Experimental and Numerical Studies on the Characteristics of Simple and Multi-cell Shapes of Quasi-hemisphere Thin-walled Structures [Volume 27, Issue 8, 2014, Pages 1307-1316]
-
Parsasadr, Amir
Waterhammer Caused by Intermittent Pump Failure in Pipe Systems Including Parallel Pump Groups [Volume 29, Issue 4, 2016, Pages 444-453]
-
Parthasarathy, G.
Security and Data Privacy of Medical Information in Blockchain Using Lightweight Cryptographic System [Volume 36, Issue 5, 2023, Pages 925-933]
-
Parung, H.
Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
-
Parvane, M.
Optimization of Quantum Cellular Automata Circuits by Genetic Algorithm [Volume 33, Issue 2, 2020, Pages 229-236]
-
Parvania, M.
Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
-
Parvar, M.
Performance of Rotating Solar Still with Rotating External Reflectors (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 884-892]
-
Parvar, M.
Experimental Investigation of Sinusoidal Tube in Triplex-Tube Heat Exchanger during Charging and Discharging Processes Using Phase Change Materials [Volume 32, Issue 7, 2019, Pages 999-1009]
-
Parvez M., M.
Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
-
Parvini, Mehdi
Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1511-1518]
-
Parvizian, F.
Fabrication of (Acrylonitrile Butadiene Styrene/Poly Ethylene Glycol) Nanofiltration Membrane: the Effect of PEG Concentration and Operating Conditions on Membrane Performance [Volume 31, Issue 10, 2018, Pages 1609-1616]
-
Parvizi Moghadam, R
Online Monitoring for Industrial Processes Quality Control Using Time Varying Parameter Model [Volume 31, Issue 4, 2018, Pages 524-532]
-
Pasandi, A. M.
Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
-
Pasandideh, S. H. R.
Operating Room Scheduling Optimization Based on a Fuzzy Uncertainty Approach and Metaheuristic Algorithms [Volume 35, Issue 2, 2022, Pages 258-275]
-
Pasandideh, S. H. R.
Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
-
Pasban, S.
Algorithm of Predicting Heart Attack with using Sparse Coder [Volume 36, Issue 12, 2023, Pages 2190-2197]
-
Pasdarshahri, Hadi
The Effect of Geometrical Characteristics of Desiccant Wheel on its Performance [Volume 22, Issue 1, 2009, Pages 63-75]
-
Pasha, P.
Hybrid Analysis of Micropolar Ethylene-glycol Nanofluid on Stretching Surface Mounted Triangular, Rectangular and Chamfer Fins by FEM Strategy and Optimization with RSM Method [Volume 35, Issue 5, 2022, Pages 845-854]
-
Pasha, P.
Chemical Reaction-Diffusion Model Around a Vessel for Studying Temperature and Concentration of Three Chemical Species by Finite Element Method [Volume 36, Issue 1, 2023, Pages 171-181]
-
Pashaei, M. H.
Effects of Geometric Nonlinearity on Stress Analysis in Large Amplitude Vibration of thin Circular Functionally Graded Plates With Rigid Core [Volume 24, Issue 3, 2011, Pages 281-290]
-
Pashaei, M. H.
Large Deflection Analysis of Compliant Beams of Variable Thickness and Non-Homogenous Material under Combined Load and Multiple Boundary Conditions [Volume 25, Issue 4, 2012, Pages 353-362]
-
Pashai, E
Highly Sensitive Amperometric Sensor Based on Gold Nanoparticles Polyaniline Electrochemically Reduced Graphene Oxide Nanocomposite for Detection of Nitric Oxide [Volume 31, Issue 2, 2018, Pages 188-195]
-
Pashaie, Pouya
Nusselt Number Estimation along a Wavy Wall in an Inclined Lid-driven Cavity using Adaptive Neuro-Fuzzy Inference System (ANFIS) [Volume 26, Issue 4, 2013, Pages 383-392]
-
Pashapour, Malihe
Exergy Analysis of a Novel Combined System Consisting of a Gas Turbine, an Organic Rankine Cycle and an Absorption Chiller to Produce Power, Heat and Cold [Volume 32, Issue 9, 2019, Pages 1320-1326]
-
Pashrashid, A.
Graph Centrality Algorithms for Hardware Trojan Detection at Gate-Level Netlists [Volume 35, Issue 7, 2022, Pages 1375-1387]
-
Pasra, M.
Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
-
Pastor, S. S.
A Real-time Motion Tracking Wireless System for Upper Limb Exosuit Based on Inertial Measurement Units and Flex Sensors (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 820-827]
-
Patarashvili, Anton
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Patel, A. N
Design Optimization of Axial Flux Surface Mounted Permanent Magnet Brushless DC Motor For Electrical Vehicle Based on Genetic Algorithm [Volume 31, Issue 7, 2018, Pages 1050-1056]
-
Patel, A. N.
Cogging Torque Reduction of Sandwiched Stator Axial Flux Permanent Magnet Brushless DC Motor using Magnet Notching Technique [Volume 32, Issue 7, 2019, Pages 940-946]
-
Patel, B.
The Behaviour of Wave Propagation for Structural System Identification: A Comparative Study [Volume 35, Issue 12, 2022, Pages 2305-2312]
-
Patel, B.
A Baseline Free Method for Multiple Damage Identification and Localization using the Roving Mode Shape Response [Volume 36, Issue 5, 2023, Pages 946-954]
-
Patel, B.
Mode Shape Change Based System Identification: An Improvement using Distribute Computing and Roving Technique [Volume 36, Issue 9, 2023, Pages 1659-1666]
-
Patel, C. R.
Identification of Factors Causing Risky Driving Behavior on High-speed Multi-lane Highways in India Through Principal Component Analysis [Volume 35, Issue 11, 2022, Pages 2130-2138]
-
Patel, C. R.
Integration of Remote Sensing and Big Data to Study Spatial Distribution of Urban Heat Island for Cities with Different Terrain [Volume 36, Issue 1, 2023, Pages 71-77]
-
Patel, J. B.
Flood Hazard Assessment of Water-Front Geosynthetic Reinforced Soil Wall for Dam Regulation Rule Level [Volume 36, Issue 4, 2023, Pages 640-648]
-
Patel, J. K. B
An Accurate 2D Analytical Model for Transconductance to Drain Current ratio (gm/Id) for a Dual Halo Dual Dielectric Triple Material Cylindrical Gate All Around MOSFETs [Volume 31, Issue 7, 2018, Pages 1038-1043]
-
Patel, L. S.
An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It [Volume 37, Issue 3, 2024, Pages 556-566]
-
Patel, M.
Finite Element Modelling of Laboratory Tests on Reinforced Concrete Beams Containing Recycled Aggregate Concrete [Volume 36, Issue 5, 2023, Pages 991-999]
-
Patel, Mayank
Numerical investigation of FRP retrofitted short RC circular columns under concentric compressive load [(Articles in Press)]
-
Patel, S.
Potential Use of Fly Ash for Developing Angular-shaped Aggregate [Volume 36, Issue 6, 2023, Pages 1114-1120]
-
Patel, S.
Application of Class C Fly Ash and Quarry Dust Mix for Utilization as Subbase Material in Flexible Pavement [Volume 36, Issue 9, 2023, Pages 1597-1604]
-
Patel, S.
Effect of Crushing Process Parameters on Quality of Fly Ash Aggregates Produced After Crushing High Strength Fly Ash Blocks: A Laboratory Investigation [Volume 37, Issue 3, 2024, Pages 511-519]
-
Patel, Sandip S.
Multi-criteria Decision Making Approach: selection of Blanking Die Material (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 800-806]
-
Patel, S. S.
Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine [Volume 31, Issue 10, 2018, Pages 1760-1766]
-
Pathak, T.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Patil, S.
Fault Detection of Anti-friction Bearing using Ensemble Machine Learning Methods [Volume 31, Issue 11, 2018, Pages 1972-1981]
-
Patil, S. S.
Effect of Varying Glass Powder Size on Performance of Cement Mortar: Microstructural and Compressive Strength Assessment at High Temperatures [Volume 37, Issue 4, 2024, Pages 794-803]
-
Patil, V. G.
High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
-
Patil, V. K.
Real Time Emotion Recognition with AD8232 ECG Sensor for Classwise Performance Evaluation of Machine Learning Methods [Volume 36, Issue 6, 2023, Pages 1040-1047]
-
Patil, Y. D.
Effect of Varying Glass Powder Size on Performance of Cement Mortar: Microstructural and Compressive Strength Assessment at High Temperatures [Volume 37, Issue 4, 2024, Pages 794-803]
-
Patnaik, Pragya
Effect of Compression Ratio on Emission of CI Engine using Neat Karanja Oil and Karanja Oil Methyl Ester Blends [Volume 27, Issue 3, 2014, Pages 403-410]
-
Patoghi, Amirhosein
A Time Dependent Pollution Routing Problem in Multi-graph [Volume 30, Issue 2, 2017, Pages 234-242]
-
Patra, H. P.
A New Empirical Model to Increase the Accuracy of Software Cost Estimation (TECHNICAL NOTE) [Volume 30, Issue 10, 2017, Pages 1487-1493]
-
Paul, C. P.
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Pavlovskaia, E. E.
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Pawar, A. J.
Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
-
Pawar, A. J.
Finite Element Modelling of Laboratory Tests on Reinforced Concrete Beams Containing Recycled Aggregate Concrete [Volume 36, Issue 5, 2023, Pages 991-999]
-
Pawar, V. R.
Real Time Emotion Recognition with AD8232 ECG Sensor for Classwise Performance Evaluation of Machine Learning Methods [Volume 36, Issue 6, 2023, Pages 1040-1047]
-
Payab, Hassan
Mathematical Model For Energy Saving In Induration Of Iron Ore Pellets Containing Solid Fuel [Volume 16, Issue 3, 2003, Pages 265-278]
-
Paydar, M. M.
An Integrated Approach for Collection Center Selection in Reverse Logistics [Volume 30, Issue 7, 2017, Pages 1005-1016]
-
Paydar, Mohammad Mahdi
Buying Group Design Considering the Member’s Interest [Volume 30, Issue 9, 2017, Pages 1334-1341]
-
Paydar, Mohammad Mahdi
Robust Design of Dynamic Cell Formation Problem Considering the Workers Interest [Volume 32, Issue 12, 2019, Pages 1790-1797]
-
Pazouki, Mohammad
Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
-
Pazouki, Mohammad
Stimuli-responsive Biosynthesis of Gold Nanoparticles: Optimization, Kinetics, and Thermodynamics of Biosorption [Volume 32, Issue 11, 2019, Pages 1506-1515]
-
Peason, Raymod
Modeling of Stiffening and Strengthening in Nano-Layered Silicate/Epoxy (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 93-100]
-
Peasura, P.
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Pedapudi, M. C.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Pedram, Omid
An Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade [Volume 27, Issue 5, 2014, Pages 785-792]
-
Pedram, Omid
Cluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE) [Volume 28, Issue 9, 2015, Pages 1336-1342]
-
Peikary, F.
Comparative Cyanide and Thiourea Extraction of Gold Based on Characterization Studies (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 97-102]
-
Peiravi, A.
Connectivity as a Measure of Power System Integrity [Volume 1, Issue 2, 1988, Pages 97-110]
-
Peiravi, M. M.
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Peiravi, M. M.
Generating Electrical Power using Movement of Various Vehicles in New Lighting Base [Volume 35, Issue 2, 2022, Pages 387-396]
-
Peiravi, M. M.
Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
-
Peng, B.
Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II [Volume 37, Issue 1, 2024, Pages 136-150]
-
Penkov, G. M.
Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
-
Pennati, Giancarlo
A Study on Ratio of Loss to Storage Modulus for the Blood Clot [Volume 27, Issue 8, 2014, Pages 1167-1172]
-
Perkasa, D. P.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Perwitasari, D. A.
Digital Assistant for Pharmacists Using Indonesian Language Based on Rules and Artificial Intelligence [Volume 37, Issue 9, 2024, Pages 1746-1754]
-
Petrakov, D. G.
Standards for Selection of Surfactant Compositions used in Completion and Stimulation Fluids [Volume 36, Issue 9, 2023, Pages 1605-1610]
-
Petrakov, D. G.
Experimental Evaluation of Effective Chemical Composition on Reservoir Quality of Bottomhole Zone of Low Permeability Terrigenous Reservoirs [Volume 37, Issue 8, 2024, Pages 1547-1555]
-
Peydaie, P.
Investigation on the Effect of Different Parameters in Wheeled Mobile Robot Error (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 195-210]
-
Peyravi, F.
Accurate Analytical Modeling of Drain Current of Heterojunction Tunneling Field Effect Transistor [Volume 37, Issue 7, 2024, Pages 1331-1342]
-
Peyravi, M
Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
-
Peyvandi, K.
Improving Image Inpainting based on Structure and Texture Information Using Quadtree [Volume 33, Issue 5, 2020, Pages 940-948]
-
Pezeshk, S.
Optimal Design of Geometrically Nonlinear Structures Under a Stability Constraint [Volume 7, Issue 2, 1994, Pages 75-84]
-
Phalla, M.
Design of a Circular Patch Antenna with Parasitic Elements for 5G Applications [Volume 36, Issue 9, 2023, Pages 1686-1694]
-
Phalle, V.
Fault Detection of Anti-friction Bearing using Ensemble Machine Learning Methods [Volume 31, Issue 11, 2018, Pages 1972-1981]
-
Phalle, V. M.
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Phan, N. H.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Phan, N. H.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Phan, V. T. A.
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Phan, V. T. A.
In-situ Fine Basalt Soil Reinforced by Cement Combined with Additive DZ33 to Construct Rural Roads in Gia Lai Province, Vietnam [Volume 33, Issue 11, 2020, Pages 2137-2145]
-
Phani Prasanthi, P.
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Phan Nguyen, H.
Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
-
Phianpranthong, T.
Mixed-mode Multiphase Sinusoidal Oscillators using Differential Voltage Current Conveyor Transconductance Amplifiers and Only Grounded Passives Components [Volume 36, Issue 5, 2023, Pages 1023-1033]
-
Phongcharoenpanich, C.
Design of a Circular Patch Antenna with Parasitic Elements for 5G Applications [Volume 36, Issue 9, 2023, Pages 1686-1694]
-
Phuvoravan, K.
Lateral Load Carrying Capacity of Concrete-filled Cold-formed Steel Shear Wall [Volume 35, Issue 1, 2022, Pages 161-171]
-
Pietrzak, J.
Maximum Load and Minimum Volume Structural Optimization [Volume 13, Issue 3, 2000, Pages 11-20]
-
Piljuk, E. A.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
PILLA, RAMANA
Tuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive [Volume 29, Issue 11, 2016, Pages 1565-1573]
-
Piramoon, M.R.
The Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools [Volume 5, Issue 3, 1992, Pages 105-112]
-
Pirayesh, M
Emergency Service Vehicle Location Problem with Batch Arrival of Demands [Volume 31, Issue 8, 2018, Pages 1240-1249]
-
Pirayesh, M.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Pirayesh, Mohammad Ali
The Simultaneous Effect of Holding Safety Stock and Purchasing Policies on the Economic Production Quantity Model Subject to Random Machine Breakdown [Volume 32, Issue 11, 2019, Pages 1643-1655]
-
Pircheraghi, G.
Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy [Volume 32, Issue 2, 2019, Pages 338-345]
-
PIRHAYATI, MAHDI
Convective Heat Transfer of Oil Based Nanofluid Flow Inside a Circular Tube [Volume 27, Issue 2, 2014, Pages 341-348]
-
Piroozfam, Niloofar
Numerical Study on Hydrodynamics and Heat Transfer Characteristics Around a Cylinder with Inclined Splitter Plates [Volume 29, Issue 4, 2016, Pages 546-553]
-
Pirouz, F.
Plant-Based Calcium Fructoborate as Boron-Carrying Nanoparticles for Neutron Cancer Therapy [Volume 32, Issue 4, 2019, Pages 460-466]
-
Pirouzpanah, V.
Investigation of Dual Fuel Diesel Engine With Particular Reference to Engine Cycle Model [Volume 2, Issue 1, 1989, Pages 65-70]
-
Pirouzpanah, V.
Prediction of Physical Delay Period RiDirect Injection Diesel Engine Combustion [Volume 4, Issue 3, 1991, Pages 141-148]
-
Pirouzpanah, V.
Dual-Fuelling of a Direct-Injection Automotive Diesel Engine by Diesel-Gas Method [Volume 5, Issue 3, 1992, Pages 129-136]
-
Pirouzpanah, V.
Development of a Mathematical Model for Prediction of Pollutants Emission in D. I. Diesel Engines [Volume 11, Issue 1, 1998, Pages 37-42]
-
Pirouzpanah, V.
Prediction of Major Pollutants Emission in Direct-Injection Dual-Fuel Diesel And Natural-Gas Engines [Volume 13, Issue 2, 2000, Pages 55-68]
-
Pirouzpanah, V.
Dual Fuelling of a Direct Injection Automotive Diesel Engine by Diesel and Compressed Natural Gas [Volume 13, Issue 3, 2000, Pages 51-58]
-
Pirouzpanah, V.
The Theoretical and Experimental Investigation of the Effect of Variation of Thermodynamical Parameters of Egr fluid on No Emissions in S I Engines [Volume 14, Issue 3, 2001, Pages 273-273]
-
Pirouzpanah, V.
A Predictive Model for the Combustion Process in Dual Fuel Engines at Part Loads Using a Quasi Dimensional Multi Zone Model and Detailed Chemical Kinetics Mechanism [Volume 19, Issue 1, 2006, Pages 83-98]
-
Pirouzram, Omid
A New Approach for Determination of Neck-Pore Size Distribution of Porous Membranes via Bubble Point Data [Volume 28, Issue 6, 2015, Pages 823-831]
-
Pirzadeh, Kasra
Adsorption of Fe (II) from Aqueous Phase by Chitosan: Application of Physical Models and Artificial Neural Network for Prediction of Breakthrough [Volume 26, Issue 8, 2013, Pages 845-858]
-
Pirzadeh, M.
Design of Generalized Predictive Control for the Stabilizing Loop from a two-axis Gimbal Seeker, Considering Cross-Coupling in Between two Channels [Volume 32, Issue 4, 2019, Pages 555-561]
-
Pirzadeh, Meisam
Effects of Flight Dynamics on Performance of One Axis Gimbal System, Considering Disturbance Torques [Volume 28, Issue 8, 2015, Pages 1108-1116]
-
Pisgar, Roya
Phenol Biodegradation Kinetics in the Presence of Supplimentary Substrate [Volume 25, Issue 3, 2012, Pages 181-192]
-
Pishahang, Mehdi
Effect of CO2 Partial Pressure on the Thermal Decomposition Kinetics of Zinc Carbonate Hydroxide (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 263-268]
-
Pishdad, R.
Dye Adsorption on the Blends of Saffron Petals Powder with Activated Carbon: Response Surface Methodology [Volume 31, Issue 12, 2018, Pages 2001-2008]
-
Pishevar, A. R.
Numerical Simulation of Shock-Wave/Boundary/Layer Interactions in a Hypersonic Compression Corner Flow [Volume 11, Issue 4, 1998, Pages 197-206]
-
Pishevar, A. R.
Aerodynamic Design Optimization Using Genetic Algorithm (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 307-318]
-
Pishvaee, Mir Saman
The Reliable Hierarchical Location-allocation Model under Heterogeneous Probabilistic Disruptions [Volume 29, Issue 10, 2016, Pages 1401-1411]
-
Pishvaee, Mir Saman
Design of a Reliable Facility Location Model for Health Service Networks [Volume 30, Issue 1, 2017, Pages 75-84]
-
Pishvaee, M. S
A Multi-objective Hierarchical Location-allocation Model for the Healthcare Network Design Considering a Referral System [Volume 31, Issue 2, 2018, Pages 365-373]
-
Pithadiya, Mehulkumar
Influence of Real Ground Motion Records in Performance Assessment of RC Buildings [Volume 32, Issue 12, 2019, Pages 1745-1752]
-
Pitta, Sundara
Analysis on Components Complexity During Execution of Construction Projects [Volume 29, Issue 9, 2016, Pages 1227-1234]
-
P L, Panaiyappan
Direct Displacement Based Design of Reinforced Concrete Elevated Water Tanks Frame Staging [Volume 32, Issue 10, 2019, Pages 1395-1406]
-
Platoša, J.
Autonomous Vehicle Convoy Formation Control with Size/Shape Switching for Automated Highways [Volume 33, Issue 11, 2020, Pages 2174-2180]
-
Podoprigora, Dmitriy Georgievich
Justification of the development system and measures to increase the productivity of wells in the oil field of the eastern part of the Pechora sea [(Articles in Press)]
-
Pohan, M. A. R.
Efficient Sampling-based for Mobile Robot Path Planning in a Dynamic Environment Based on the Rapidly-exploring Random Tree and a Rule-template Sets [Volume 36, Issue 4, 2023, Pages 797-806]
-
Poilov, V.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Poladi, A.
Mechanical Properties and Microstructural Evolution of Ta/TaNx Double Layer Thin Films Deposited by Magnetron Sputtering [Volume 30, Issue 2, 2017, Pages 288-293]
-
Poladi, A.
Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization [Volume 30, Issue 4, 2017, Pages 551-557]
-
Poladi, A.
MD-Simulation of Duty Cycle and TaN Interlayer Effects on the Surface Properties of Ta Coatings Deposited by Pulsed-DC Plasma Assisted Chemical Vapor Deposition [Volume 33, Issue 5, 2020, Pages 861-869]
-
Ponnusamy, Lakshmi
An Investigation of Temperature Effects on Solar Photovoltaic Cells and Modules [Volume 27, Issue 11, 2014, Pages 1713-1722]
-
Poorebrahim, Gholam Reza
Behavior of Compacted Lime-soil Columns [Volume 27, Issue 2, 2014, Pages 315-324]
-
Poormina, M. A.
Reducing the Limitation on Application of Synchronous Decorrelating Detector Cdma Systems [Volume 14, Issue 2, 2001, Pages 107-112]
-
Poormohammadi, A.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Pooyan, M.
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Poplygin, V. V.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Poplygin, V. V.
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Poplygin, V. V.
Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
-
Poplygin, V. V.
Prediction of the Efficiency of Hydraulic Fracturing Based on Reservoir Parameters [Volume 36, Issue 12, 2023, Pages 2169-2174]
-
Poplygin, V. V.
Study on Application of Arps Decline Curves for Gas Production Forecasting in Senegal [Volume 36, Issue 12, 2023, Pages 2207-2213]
-
Popov, YU
Purification and Characterization of a Novel Thermostable and Acid Stable α-Amylase from Bacillus Sp. Iranian S1 [Volume 26, Issue 8, 2013, Pages 815-820]
-
Pordel Maragheh, B.
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Pordel Maragheh, Babak
Effect of Initial Local Failure Type on Steel Braced Frame Buildings against Progressive Collapse [Volume 33, Issue 1, 2020, Pages 34-46]
-
Porhonar, Mohammad
Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method [Volume 32, Issue 6, 2019, Pages 860-865]
-
Porhoseni, R.
Effects of Xanthan Gum and Lime on Physical Properties and Mechanical Behavior of Organic Soil [Volume 36, Issue 10, 2023, Pages 1758-1772]
-
Porpatham, E.
Emission Reduction Strategies for Small Single Cylinder Diesel Engine Using Valve Timing and Swirl Ratio [Volume 33, Issue 8, 2020, Pages 1608-1619]
-
Postigo, J. F.
An Adaptive Impedance Controller for Robot Manipulators [Volume 3, Issue 3, 1990, Pages 76-83]
-
Pourabbas, Behzad
Conductive Polythiophene Nanoparticles Deposition on Transparent PET Substrates: Effect of Modification with Hybrid Organic-inorganic Coating (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 567-572]
-
Pourabdoli, M.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Pourabdoli, M.
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction [Volume 35, Issue 1, 2022, Pages 220-227]
-
Pourabdoli, Mehdi
Isothermal Redox Kinetics of Co3O4-Fe2O3 Nano-Composite as a Thermochemical Heat Storage Material [Volume 32, Issue 8, 2019, Pages 1200-1209]
-
Pourafshari Chenar, M
Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
-
Pourafzal, A.
Chaotic Time Series Recognition: A Deep Learning Model Inspired by Complex Systems Characteristics [Volume 36, Issue 1, 2023, Pages 1-9]
-
Pouralizadeh Moghaddam, F.
Modelling and Compensation of Uncertain Time-delays in Networked Control Systems with Plant Uncertainty Using an Improved Robust Model Predictive Control Method [Volume 33, Issue 6, 2020, Pages 1134-1141]
-
Pourasad, Y.
Optimal Control of the Vehicle Path Following by Using Image Processing Approach [Volume 31, Issue 9, 2018, Pages 1559-1567]
-
Pourasad, Y.
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Pourfallah, M.
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Pourfallah, Mohsen
Numerical Investigation on the Effect of Injection Timing on Combustion and Emissions in a DI Diesel Engine at Low Temperature Combustion Condition [Volume 24, Issue 2, 2011, Pages 165-179]
-
Pourfallah, Mohsen
Studying the Effect of Reformer Gas and Exhaust Gas Recirculation on Homogeneous Charge Compression Ignition Engine Operation [Volume 28, Issue 8, 2015, Pages 1199-1208]
-
Pourfallah, Mohsen
Numerical and Experimental Analysis of Thermal Boundary Conditions of HDD-Engine Cylinder Head for Different Combustion and Fuel [(Articles in Press)]
-
Pourfallah, Mohsen
Experimental analysis of subcooled flow boiling heat flux on gray cast iron block in heavy-duty diesel engine-like conditions: Optimization using central composite design [(Articles in Press)]
-
Pourghazi, A.
A Multi-product Humanitarian Supply Chain Network Design Problem: A Fuzzy Multi-objective and Robust Optimization Approach [Volume 37, Issue 5, 2024, Pages 941-958]
-
Pourhasan, M.
An Economic Approach to the Confinement of Different Concrete Classes with Carbon and Glass Fibers Reinforced Polymers [Volume 36, Issue 4, 2023, Pages 776-787]
-
Pourjafari, N.
An Optimized PID for Capsubots using Modified Chaotic Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1377-1384]
-
Pourkamali Anaraki, A.
Micro-structural Deformation Field Analysis of Aluminum Foam using Finite Element Method and Digital Image Correlation [Volume 33, Issue 10, 2020, Pages 2065-2078]
-
Pourkarim Guilani, Pedram
Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
-
Pourmahmoud, Nader
NUMERICAL SIMULATION OF EFFECTS OF NON-IONIZED MASS INJECTION ON THE MHD FLOW IN A CIRCULAR CHANNEL [Volume 25, Issue 1, 2012, Pages 71-78]
-
Pourmahmoud, Nader
A NUMERICAL STUDY OF SINGLE-PHASE FORCED CONVECTIVE HEAT TRANSFER WITH FLOW FRICTION IN MICROCHANNELS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 79-88]
-
Pourmoosa, A. A.
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Pournadaf Haghi, M.
Effect of Link Slab on Seismic Response of Two Span Straight and Skew Bridges [Volume 21, Issue 3, 2008, Pages 257-266]
-
Pourreza, Neda
A Common Weight Multi-criteria Decision analysis-data Envelopment Analysis Approach with Assurance Region for Weight Derivation from Pairwise Comparison Matrices [Volume 28, Issue 12, 2015, Pages 1746-1755]
-
Poursaeidi, E
Application of the Hot Spotting Method for the Straightening of a Large Turbine Rotor [Volume 31, Issue 1, 2018, Pages 110-119]
-
Poursaeidi, E.
Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading [Volume 32, Issue 6, 2019, Pages 872-876]
-
Poursaeidi, Esmaeil
The Causes of Local Hardness Increasing in Powerplant Rotors and its Modification by Tempering (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 267-274]
-
Poursaeidi, Esmaeil
An Investigation on the Causes of a Rotor Bending and its Thermal Straightening (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 281-290]
-
Poursaeidi, Esmaeil
Life Estimate of a Compressor Blade through Fractography [Volume 26, Issue 4, 2013, Pages 393-400]
-
Poursaeidi, Esmaeil
Failure Probability and Remaining Life Assessment of Reheater Tubes [Volume 26, Issue 5, 2013, Pages 543-552]
-
Poursaeidi, Esmaeil
An Outrun Competition of Corrosion Fatigue and Stress Corrosion Cracking on Crack Initiation in a Compressor Blade [Volume 27, Issue 5, 2014, Pages 785-792]
-
Poursaeidi, Esmaeil
Reverse Engineering for Designing the Coupling of a 32 MW Rotor-generator by Shrink Fitting Method (TECHNICAL NOTE) [Volume 28, Issue 9, 2015, Pages 1375-1382]
-
Poursaeidi, Esmaeil
Comparison of Properties of Ti/TiN/TiCN/TiAlN Film Deposited by Cathodic Arc Physical Vapor and Plasma-assisted Chemical Vapor Deposition on Custom 450 Steel Substrates [Volume 29, Issue 10, 2016, Pages 1459-1468]
-
Poursaiedi, E.
Probability Approach for Prediction of Pitting Corrosion Fatigue Life of Custom 450 Steel [Volume 31, Issue 10, 2018, Pages 1773-1781]
-
Poursina, M.
Experimental Investigation of Spur Gear Tooth Crack Location and Depth Detection using Short-time Averaging Method and Statistical Indicators [Volume 33, Issue 10, 2020, Pages 2079-2086]
-
Poursina, Mehrdad
Experimental and Neural Network Prediction of Elongation and Spread after First Stage of Fullering [Volume 23, Issue 3, 2010, Pages 233-242]
-
Poursina, Mehrdad
Prediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling [Volume 25, Issue 1, 2012, Pages 79-88]
-
Poursina, Mehrdad
The Effect of Normal Anisotropy on Thin-Walled Tube Bending [Volume 26, Issue 1, 2013, Pages 83-90]
-
Poursina, Mehrdad
Numerical and Analytical Investigation in Radiated Noise by a Shock-Absorber [Volume 26, Issue 12, 2013, Pages 1525-1534]
-
Poursina, Mehrdad
Prediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process [Volume 28, Issue 8, 2015, Pages 1209-1218]
-
Poursoltan, L.
An Extension to the Economic Production Quantity Problem with Deteriorating Products Considering Random Machine Breakdown and Stochastic Repair Time [Volume 33, Issue 8, 2020, Pages 1567-1578]
-
Pourtakdoust, S.H.
Scientific Flow Field Simulation of Cruciform Missiles Through the Thin Layer Navier Stokes Equations [Volume 7, Issue 1, 1994, Pages 41-56]
-
Pourtakdoust, S.H.
Thrust - Limited Optimal Three - Dimensional Spacecraft Trajectories [Volume 14, Issue 1, 2001, Pages 81-89]
-
Pouryafar, F.
Thermostable α-amylase from Lignocellulosic Residues Using Bacillus amyloliquefaciens [Volume 30, Issue 8, 2017, Pages 1110-1117]
-
Pourzaki, Abbas
Nonlinear Analysis of a Power Amplifier inc C Band and Load Pull Technique Calculation USING VOLTERRA SERIES [Volume 17, Issue 2, 2004, Pages 131-134]
-
Pourzangbar, A.
Effects of Brace-viscous Damper System on the Dynamic Response of Steel Frames [Volume 33, Issue 5, 2020, Pages 720-731]
-
Pourzeynali, S.
Optimization of the TMD Parameters to Suppress the Vertical Vibrations of Suspension Bridges Subjected to Earthquake Excitations [Volume 22, Issue 1, 2009, Pages 23-34]
-
Pourzeynali, S.
Multi-objective Optimization of Semi-active Control of Seismically Exited Buildings Using Variable Damper and Genetic Algorithms [Volume 25, Issue 3, 2012, Pages 265-276]
-
Pourzeynali, S.
Semi-active Control of Building Structures using Variable Stiffness Device and Fuzzy Logic [Volume 26, Issue 10, 2013, Pages 1169-1182]
-
Pourzeynali, S.
An Investigation on the Parameters Influencing the Pounding in Highway Bridges [Volume 30, Issue 9, 2017, Pages 1298-1308]
-
Pouyan, A. A.
Detecting Overlapping Communities in Social Networks using Deep Learning [Volume 33, Issue 3, 2020, Pages 366-376]
-
Pouyan, Ali A
Leach Routing Algorithm Optimization through Imperialist Approach [Volume 27, Issue 1, 2014, Pages 39-50]
-
Pouyan, Ali A
Detection of Alzheimer\\\\\\\'s Disease using Multitracer Positron Emission Tomography Imaging [Volume 27, Issue 1, 2014, Pages 51-56]
-
Pouyan, Ali A
Estimating Reliability in Mobile ad-hoc Networks Based on Monte Carlo Simulation (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 739-746]
-
Poya-Mehr, M. R.
Effects of Aluminum, Silicon And Ferro Silicon Anti Oxidants in MgO C Refractories [Volume 16, Issue 4, 2003, Pages 361-372]
-
Prabhakar, Mahalingam
High Gain DC-DC Converter using Active Clamp Circuit (RESEARCH NOTE) [Volume 27, Issue 1, 2014, Pages 123-130]
-
Prabhu, A.
A Mthod for Generating the Turbulent Intermittency Function [Volume 10, Issue 2, 1997, Pages 91-102]
-
Prabowo, A. R.
Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
-
Prabowo, H. A.
Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
-
Pradana, I. G. M. T.
Blockchain-based Traceability System for Indonesian Coffee Digital Business Ecosystem [Volume 36, Issue 5, 2023, Pages 879-893]
-
Pradeep, G. V
Experimental Investigations on the Thermal Performance of a Vertical Closed Loop Pulsating Heat Pipe Using Binary Mixture of Fluids [Volume 31, Issue 5, 2018, Pages 805-811]
-
Pradeep, S.
Effect of Hexagonal Boron Nitrate on Microstructure and Mechanical Behavior of Al7075 Metal Matrix Composite Producing by Stir Casting Technique [Volume 32, Issue 7, 2019, Pages 1017-1022]
-
PRADEEP, J.
Neural Network Based Recognition System Integrating Feature Extraction and Classification for English Handwritten [Volume 25, Issue 2, 2012, Pages 99-106]
-
Pradhan, P. Man
Lateral Load Carrying Capacity of Concrete-filled Cold-formed Steel Shear Wall [Volume 35, Issue 1, 2022, Pages 161-171]
-
Pradhan, Sambhu
Look up Table Based Low Power Analog Circuit Testing [Volume 29, Issue 9, 2016, Pages 1247-1256]
-
Pradhan, S. N.
Low Dropout Based Noise Minimization of Active Mode Power Gated Circuit [Volume 31, Issue 9, 2018, Pages 1546-1552]
-
Prajapati, J. M.
Multi-criteria Decision Making Approach: selection of Blanking Die Material (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 800-806]
-
Prajapati, J. M.
Experimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine [Volume 31, Issue 10, 2018, Pages 1760-1766]
-
Prakash, D.
Enhancement of Heat Transfer over a Double Forward Facing Step with Square Obstacle through Taguchi’s Optimization Technique [Volume 30, Issue 8, 2017, Pages 1253-1259]
-
PRAKASH, S S BHANU
Analysis on Components Complexity During Execution of Construction Projects [Volume 29, Issue 9, 2016, Pages 1227-1234]
-
Pramanick, A. K.
Window Air Conditioner with Orthodox Refrigerants [Volume 32, Issue 2, 2019, Pages 322-327]
-
Pramono, Susatyo Adhi
Strengthening the Standardisation of Professional Engineering Competencies to Support Sustainable Construction Through Circular Economy Principles in Indonesia [(Articles in Press)]
-
Prasanth, A. S.
Ballistic Testing and Simulation of Co-continuous Ceramic Composite for Body Armour [Volume 33, Issue 9, 2020, Pages 1792-1796]
-
Prasanth, I. S. N. V. R.
Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1074-1080]
-
Prasanth, Narayanan
Starvation Free Scheduler for Buffered Crossbar Switches (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 523-528]
-
Prasetio, A
Seismicity of Batubesi Dam at Sorowako Region Based on Earthquake Data and Microtremor Measurement [Volume 31, Issue 8, 2018, Pages 1180-1186]
-
Prashant, S.
Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
-
Pratapa, S.
Structural, Optical and Defect State Analyses of ZnO Nanoparticle Films [Volume 33, Issue 5, 2020, Pages 852-860]
-
Pratiwi, V.
Numerical Simulation of Embankment Settlement in Vacuum Preloading Systems [Volume 36, Issue 4, 2023, Pages 817-823]
-
Preethi, B.
Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
-
Priatna, E.
Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
-
Přibyl, O.
Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
-
Přibyl, P.
Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
-
Prifiharni, S.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Prifiharni, S.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Principal, Tamizharasan T
Optimization of Minimum Quantity Liquid Parameters in Turning for the Minimization of Cutting Zone Temperature [Volume 25, Issue 4, 2012, Pages 327-340]
-
Prischepa, O.
Potential of High-Carbon Domanik (Upper Devonian) Shale Deposits: Timan-Pechora Oil and Gas Province Assessment [Volume 37, Issue 8, 2024, Pages 1639-1657]
-
Priya, C.
An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
-
Priyadharshini, Ramar Ahila
Object Recognition based on Local Steering Kernel and SVM [Volume 26, Issue 11, 2013, Pages 1281-1288]
-
Priya Jhanji, K
Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading [Volume 31, Issue 1, 2018, Pages 104-109]
-
Priyotomo, G.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Priyotomo, G.
Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
-
Priyotomo, G.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Promakhov, V.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Promjantuk, C.
Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]
-
PUNDIR, RIMPLE
Hydromagnetic Instability of Stratified Rivlin-Ericksen Fluid in Porous Medium in the Presence of Suspended Particles [Volume 22, Issue 3, 2009, Pages 287-294]
-
PUNDIR, SUDHIR KUMAR
Hydromagnetic Instability of Stratified Rivlin-Ericksen Fluid in Porous Medium in the Presence of Suspended Particles [Volume 22, Issue 3, 2009, Pages 287-294]
-
Puneeth, R. P.
Security and Data Privacy of Medical Information in Blockchain Using Lightweight Cryptographic System [Volume 36, Issue 5, 2023, Pages 925-933]
-
Purba, H. H.
Use of Quality Function Deployment for Gold Mining Feasibility Study (Case Study: Designing Explosive Storage Area) [Volume 33, Issue 5, 2020, Pages 825-832]
-
Purwaningsih, S. Y.
Structural, Optical and Defect State Analyses of ZnO Nanoparticle Films [Volume 33, Issue 5, 2020, Pages 852-860]
-
Purwanto, A.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Purwono, P.
Equilibrium of Ammonia (NH3) and Ammonium (NH4+) during Microalgae Harvesting using Electrocoagulation [Volume 36, Issue 3, 2023, Pages 565-572]
-
Pushkarev, Aleksander
The evaluation of complicated mining exploitation conditions influence on service life of open pit trucks suspensions with remote monitoring systems [(Articles in Press)]
-
Puspita, K.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Puspitasari, K. M. D.
Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
-
Puspitasari, P
Mechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE) [Volume 31, Issue 7, 2018, Pages 1103-1108]
-
Puspitasari, P.
Physical and Magnetic Properties Comparison of Cobalt Ferrite Nanopowder Using Sol-gel and Sonochemical Methods [Volume 33, Issue 5, 2020, Pages 877-884]
-
Puteh, M. H
Evaluating the Sintering Temperature Control Towards the Adsorptivity of Ammonia onto the Natural Zeolite Based Hollow Fibre Ceramic Membrane [Volume 31, Issue 8, 2018, Pages 1398-1405]
-
Putra, I.D.G.A.D
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Putra, O. A.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Putro, A.
Development of Work Breakdown Structure for Stadium Work as Project Guideline and Standard [Volume 35, Issue 7, 2022, Pages 1291-1299]
Q
-
Qaribpour, F.
An Efficient Predictive Model for Probability of Genetic Diseases Transmission Using a Combined Model [Volume 30, Issue 8, 2017, Pages 1152-1159]
-
Qazanfari, H.
Content-based Image Retrieval Considering Colour Difference Histogram of Image Texture and Edge Orientation [Volume 33, Issue 5, 2020, Pages 949-958]
-
Qhaderi, R.
A Parametric Study of the Behavior of Geosynthetic Reinforced Soil Slopes [Volume 18, Issue 4, 2005, Pages 371-389]
-
Qi, C.
Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
-
Qi, Lei
A Modified Discreet Particle Swarm Optimization for a Multi-level Emergency Supplies Distribution Network [Volume 29, Issue 3, 2016, Pages 359-367]
-
Qian, JB.
Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
-
Qian, L. Y.
Effective Blended Learning Model Selection Based on Student Learning Style using Analytic Hierarchy Process for an Undergraduate Engineering Course [Volume 36, Issue 12, 2023, Pages 2232-2242]
-
Qolipour, F.
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
-
Qorbani, A.
Evaluating and Ranking Digital Stores’ Suppliers using TOPKOR Method [Volume 35, Issue 11, 2022, Pages 2155-2163]
-
Qosim, N
Mechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE) [Volume 31, Issue 7, 2018, Pages 1103-1108]
-
Quamrul Islam, M. D.
A Studyof the Design of Horizontal Axis Wind Turbine [Volume 6, Issue 2, 1993, Pages 117-124]
-
Quamrul Islam, M. D.
Natural Convection Heat Transfer within Octagonal Enclosure [Volume 23, Issue 1, 2010, Pages 1-10]
-
Quoc, V. D.
A Comparative Analysis of Axial and Radial Forces in Windings of Amorphous Core Transformers [Volume 37, Issue 1, 2024, Pages 201-212]
R
-
R, KARTHIKEYAN
Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
-
R, Sankaran
Simulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching [Volume 25, Issue 4, 2012, Pages 267-274]
-
R, Thandeeswaran
RESCUE: Reputation based Service for Cloud User Environment [Volume 27, Issue 8, 2014, Pages 1179-1184]
-
Raad Shaker, H.
Behavior of Reinforced Geopolymer Concrete Beams under Repeated Load [Volume 37, Issue 5, 2024, Pages 974-983]
-
Rabbani, M.
A Comprehensive Mathematical Model for Designing an Organ Transplant Supply Chain Network under Uncertainty [Volume 32, Issue 6, 2019, Pages 835-841]
-
Rabbani, M.
A Post-disaster Assessment Routing Multi-objective Problem under Uncertain Parameters [Volume 33, Issue 12, 2020, Pages 2503-2508]
-
Rabbani, Masoud
A New Approach to Approximate Completion Time Distribution Function of Stochastic Pert Networks [Volume 15, Issue 1, 2002, Pages 53-62]
-
Rabbani, Masoud
A Comprehensive Model for R and D Project Portfolio Selection with Zero-One Linear Goal-Programming (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 55-66]
-
Rabbani, Masoud
A New Multi-Objective Model for Dynamic Cell Formation Problem with Fuzzy Parameters [Volume 21, Issue 2, 2008, Pages 159-172]
-
Rabbanifar, S.
Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process [Volume 31, Issue 6, 2018, Pages 877-885]
-
Rabiee, A. H.
Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
-
Rabiee, S. M.
Corrosion Behavior of TiN/CrN Nanoscale Multi-layered Coating in Ringer's Solution [Volume 33, Issue 2, 2020, Pages 329-336]
-
Rabiee, S. M.
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Rabiee, S. M.
Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
-
Rabiei, A.
Well-to-wheel Energy Consumption and CO2 Emission Comparison of Electric and Fossil Fuel Buses: Tehran Case Study [Volume 37, Issue 3, 2024, Pages 567-578]
-
Rad, M.
Experimental Investigation of Friction Coefficient in Ribleted Pipes and the Effect of Fine Particles [Volume 11, Issue 2, 1998, Pages 93-100]
-
Rad, M.
Effect of Camber and Thickness on the Aerodynamic Properties of an Airfoil in Ground Proximity (RESEARCH NOTE) [Volume 14, Issue 3, 2001, Pages 273-273]
-
Rad, M.
Effects of Slip Condition on the Characteristic of Flow in Ice Melting Process [Volume 18, Issue 3, 2005, Pages 253-261]
-
Rad, M.
Hydrodynamics Analysis of Density Currents [Volume 21, Issue 3, 2008, Pages 211-226]
-
Rad, M.
Comparison Final Velocity for Land Yacht with a Rigid Wing and Cloth Sail [Volume 22, Issue 1, 2009, Pages 59-68]
-
Rad, M.
Influence of Afterbody and Boundary Layer on Cavitating Flow [Volume 22, Issue 2, 2009, Pages 185-196]
-
Rad, M.
Numerical and Experimental Investigations for Design of a High Performance Micro-hydro-kinetic Turbine [Volume 30, Issue 5, 2017, Pages 785-790]
-
Radhamma, E.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Radhamma, E.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
-
Radji, A.
Tv and or Fm Transmitting Antennas Desien Using Computer Graphic System (RESEARCH NOTES) [Volume 7, Issue 3, 1994, Pages 173-180]
-
Radnia, Hamideh
Adsorption of Fe (II) from Aqueous Phase by Chitosan: Application of Physical Models and Artificial Neural Network for Prediction of Breakthrough [Volume 26, Issue 8, 2013, Pages 845-858]
-
Raeisi, E.
Contamination of the Konar Siah Karst Spring by Saltdom [Volume 9, Issue 1, 1996, Pages 37-44]
-
Raeisi Ardali, G. A
The Integrated Supply Chain of After-sales Services Model: A Multi-objective Scatter Search Optimization Approach [Volume 31, Issue 3, 2018, Pages 422-431]
-
Raeisi Estabragh, Ehsan
Nonlocal Effect on Buckling of Triangular Nano-composite Plates [Volume 29, Issue 3, 2016, Pages 411-425]
-
Raeissi, E.
Stochastic Synthesis of Drouths for Reservoir Storage Design (RESEARCH NOTE). [Volume 6, Issue 1, 1993, Pages 59-63]
-
Raeissi Jelodar, H.
The Energy and Exergy Analysis of Integrated Hydrogen Production System Using High Temperature Steam Electrolysis with Optimized Water Path (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 893-900]
-
Rafebakhsh, M. S.
Analyzing Factors Influencing Mobile Social Media Marketing Acceptance among Customers [Volume 35, Issue 6, 2022, Pages 1209-1216]
-
Rafee, R.
Effect of Blade Design Parameters on Air Flow through an Axial Fan [Volume 30, Issue 10, 2017, Pages 1583-1591]
-
Rafiee, A.
Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
-
Rafiee, E.
Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
-
Rafiee, M.
Efficient Parallelization of a Genetic Algorithm Solution on the Traveling Salesman Problem with Multi-core and Many-core Systems [Volume 33, Issue 7, 2020, Pages 1257-1265]
-
Rafiee, Mehran
Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
-
Rafiei, A.
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Raghav, A. K
An Accurate 2D Analytical Model for Transconductance to Drain Current ratio (gm/Id) for a Dual Halo Dual Dielectric Triple Material Cylindrical Gate All Around MOSFETs [Volume 31, Issue 7, 2018, Pages 1038-1043]
-
Raghunadha Reddy, T.
A Document Weighted Approach for Gender and Age Prediction Based on Term Weight Measure [Volume 30, Issue 5, 2017, Pages 643-651]
-
Rahaei, M. B.
Synthesis and Characterization of Nanocrystalline Ni3Al Intermetallic during Mechanical Alloying Process [Volume 25, Issue 2, 2012, Pages 89-98]
-
Rahafrouz, Hamed
Numerical Prediction of Stator Diameter Effect on the Output Torque of Ultrasonic Traveling-wave Motor, using Finite Elements Simulation [Volume 29, Issue 5, 2016, Pages 715-721]
-
Rahardjo, M. A. H.
Simulation Study on Efficiency of Woven Matrix Wire and Tube Heat Exchanger [Volume 33, Issue 12, 2020, Pages 2572-2577]
-
Raharjo, J.
Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
-
Rahate, Swati
Design of Air Distribution System for Operation Theatre Using Flow Visualization Techniques to Improve Flow Characteristics [Volume 33, Issue 1, 2020, Pages 164-169]
-
Rahayu, Iman
Optimization of In-Situ Synthesis Process Parameters of LiFePO4/C-MAF-5 Surface Modification for Conductivity Improvement of LIB Cathode Material by Response Surface Method [(Articles in Press)]
-
Rahbar, M.
Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
-
Rahbari, A.
Experimental and Numerical Analysis of Permeability in Porous Media [Volume 33, Issue 11, 2020, Pages 2408-2415]
-
Rahbari, S
Fuzzy Wastewater Quality Index Determination for Environmental Quality Assessment under Uncertain and Vagueness Conditions [Volume 31, Issue 8, 2018, Pages 1196-1204]
-
Rahemi, Mohammad Amir
Micro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts [Volume 27, Issue 6, 2014, Pages 865-880]
-
Rahgoshay, M. A.
A Novel Sensor Integration Scheme for an Aided Inertial Navigation System Based on a Generalized PID Filter in the Presence of Observation Uncertainty [Volume 37, Issue 6, 2024, Pages 1127-1135]
-
Rahgozar, R.
Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
-
Rahgozar, Reza
Flexural Testing of High Strength Reinforced Concrete Beams Strengthened with CFRP Sheets [Volume 22, Issue 2, 2009, Pages 131-146]
-
Rahgozar, Reza
A CLOSED FORM SOLUTION FOR FREE VIBRATION ANALYSIS OF TUBE-IN-TUBE SYSTEMS IN TALL BUILDINGS [Volume 25, Issue 2, 2012, Pages 107-114]
-
Rahgozar, Reza
A Simple Approach to Static Analysis of Tall Buildings with a Combined Tube-in-tube and Outrigger-belt Truss System Subjected to Lateral Loading [Volume 25, Issue 3, 2012, Pages 289-300]
-
Rahgozar, Reza
Optimum Location of Outrigger-belt Truss in Tall Buildings Based on Maximization of the Belt Truss Strain Energy [Volume 26, Issue 7, 2013, Pages 693-700]
-
Rahil, F. H.
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Rahil, F. H.
Experimental Work on the Effect of Under-reamed Pile Geometry on the Pullout Capacity of Sand [Volume 36, Issue 9, 2023, Pages 1645-1651]
-
Rahim, E. A.
Interaction Effect of Depth of Cut, Back Rake Angle and Rock Properties on Temperature of Single Polycrystalline Diamond Compact Cutter [Volume 33, Issue 11, 2020, Pages 2425-2435]
-
Rahim, N. A.
Generation of Three-Phase PWM Inverter using Xilinx FPGA and its Application for Utility Connected PV System (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 273-278]
-
Rahimi, E.
Optimization of Quantum Cellular Automata Circuits by Genetic Algorithm [Volume 33, Issue 2, 2020, Pages 229-236]
-
Rahimi, E.
Design and Simulation of a Novel Hetero-junction Bipolar Transistor with Gate-Controlled Current Gain [Volume 36, Issue 3, 2023, Pages 433-440]
-
Rahimi, Elias
Development of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte [Volume 29, Issue 8, 2016, Pages 1062-1067]
-
Rahimi, Farzad
Numerical Study of Natural Convection Heat Transfer in a Horizontal Wavy Absorber Solar Collector Based on the Second Law Analysis [Volume 29, Issue 1, 2016, Pages 109-117]
-
Rahimi, G.
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Rahimi, M.
Numerical Modeling and Simulation of Highly Preheated and Diluted Air Combustion Furnaces [Volume 22, Issue 2, 2009, Pages 107-118]
-
Rahimi, S
A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold [Volume 31, Issue 3, 2018, Pages 487-494]
-
Rahimi, S.Behzad
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Rahimi, V.
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Rahimian, Aref
An Experimental Study of the Steel Cylinder Quenching in Water-based Nanofluids [Volume 33, Issue 1, 2020, Pages 28-33]
-
Rahimian, Mohammad Hassan
Simulation of Lid Driven Cavity Flow at Different Aspect Ratios Using Single Relaxation Time Lattice Boltzmann Method [Volume 26, Issue 12, 2013, Pages 1471-1478]
-
Rahimi eosboee, Mostafa
NUMERICAL SIMULATION OF EFFECTS OF NON-IONIZED MASS INJECTION ON THE MHD FLOW IN A CIRCULAR CHANNEL [Volume 25, Issue 1, 2012, Pages 71-78]
-
Rahimi eosboee, Mostafa
A NUMERICAL STUDY OF SINGLE-PHASE FORCED CONVECTIVE HEAT TRANSFER WITH FLOW FRICTION IN MICROCHANNELS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 79-88]
-
Rahimi Komijani, H
Optimal Policy of Condition-Based Maintenance Considering Probabilistic Logistic Times and the Environmental Contamination Issues [Volume 31, Issue 2, 2018, Pages 357-364]
-
Rahimi Mirazizi, H.
Evaluating Technical Requirements to Achieve Maximum Power Point in Photovoltaic Powered Z-Source Inverter [Volume 31, Issue 6, 2018, Pages 921-931]
-
Rahimipour, Mohammad Reza
Comparative Study of Plasma Sprayed Yittria and Ceria Stabilized Zirconia Properties [Volume 26, Issue 1, 2013, Pages 13-18]
-
Rahimipour, Mohammad Reza
Microstructure and Grain Refining Performance of a New Al-Ti-C Master Alloy (RESEARCH NOTE) [Volume 26, Issue 7, 2013, Pages 701-706]
-
Rahimipour, M. R.
Tribological Behavior of Reinforced and Unreinforced High Chromium Cast Iron [Volume 19, Issue 1, 2006, Pages 45-51]
-
Rahimipour, M. R.
Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity [Volume 21, Issue 2, 2008, Pages 109-116]
-
Rahimipour, M. R.
Synthesis of TiC-Al2O3 Nanocomposite from Impure TiO2 by Mechanical Activated Sintering [Volume 21, Issue 3, 2008, Pages 275-280]
-
Rahimipour, M. R.
Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages [Volume 22, Issue 2, 2009, Pages 169-178]
-
Rahimipour, M. R.
Microstructure and Corrosion Behavior of Al-Cu-Fe Quasi-crystalline Coated Ti-6Al-4V Alloy [Volume 36, Issue 10, 2023, Pages 1880-1891]
-
Rahimipour, M. R.
Effect of Al59Cu25.5Fe12.5B3 Quasi-crystals on Microstructure and Flexural Strength of Aluminum Matrix Composites Prepared by Spark Plasma Sintering Method [Volume 37, Issue 1, 2024, Pages 48-55]
-
Rahimi Rahbar, R.
Modeling of Texture and Color Froth Characteristics for Evaluation of Flotation Performance in Sarcheshmeh Copper Pilot Plant, Using Image Analysis and Neural Networks [Volume 17, Issue 2, 2004, Pages 121-130]
-
Rahimnejad, M.
Highly Sensitive Amperometric Sensor Based on Gold Nanoparticles Polyaniline Electrochemically Reduced Graphene Oxide Nanocomposite for Detection of Nitric Oxide [Volume 31, Issue 2, 2018, Pages 188-195]
-
Rahimnejad, M.
Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
-
Rahimpour, Hamid
Low Settling Time All Digital DLL For VHF Application [Volume 28, Issue 3, 2015, Pages 419-425]
-
Rahimpour, M. R.
Population Balance Equation Modeling of Crude Oil Demulsification Considering Demulsifier: Modification of Collision Frequency Function Based on Thermodynamic Model [Volume 30, Issue 10, 2017, Pages 1434-1442]
-
Rahimpour Cami, B.
Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
-
Rahimzadeh, E.
A Generalization for Model Reference Adaptive Control and Robust Model Reference Adaptive Control Adaptive Laws for a Class of Nonlinear Uncertain Systems with Application to Control of Wing Rock Phenomenon [Volume 33, Issue 11, 2020, Pages 2372-2383]
-
Rahimzadeh, H.
Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
-
Rahman, A.
Synthesis of Polyvinyl Alcohol-Chitosan Composite Film using Nanocellulose from Coconut Fibers (Cocos nucifera) [Volume 36, Issue 11, 2023, Pages 1993-2003]
-
Rahman, Arash
An Analysis to Wealth Distribution Based on Sugarscape Model in an Artificial Society [Volume 20, Issue 3, 2007, Pages 211-224]
-
Rahman, Md.
Mixed Convection Flow in a Rectangular Ventilated Cavity with a Heat Conducting Solid Circular Cylinder at the Center [Volume 24, Issue 1, 2011, Pages 93-105]
-
Rahman, Md.
Performance of SST k-ω Turbulence Model for Computation of Viscous Drag of Axisymmetric Underwater Bodies [Volume 24, Issue 2, 2011, Pages 139-146]
-
Rahman, M. M.
Location Sensitivity of Non-structural Component for Channel-type Auxiliary Building Considering Primary-secondary Structure Interaction [Volume 35, Issue 7, 2022, Pages 1268-1282]
-
Rahmani, A
Application of Wavelet Neural Network in Forward Kinematics Solution of 6-RSU Co-axial Parallel Mechanism Based on Final Prediction Error [Volume 31, Issue 8, 2018, Pages 1283-1291]
-
Rahmani, A. M.
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Rahmani, A. A.
Spherical Oil Agglomeration (SOA)/ Colloidal Gas Aphrons (CGA) Flotation [Volume 9, Issue 4, 1996, Pages 211-220]
-
Rahmani, A. A.
Effect of Surfactant on Spherical Oil Agglomeration of Coal (RESEARCH NOTE) [Volume 14, Issue 3, 2001, Pages 273-288]
-
Rahmani, A. A.
Selective Flocculation for Coal De Mineralization [Volume 15, Issue 2, 2002, Pages 191-203]
-
Rahmani, A. A.
EFFECT OF TIME-DEPENDENT TRANSPIRATION ON AXISYMMETRIC STAGNATION-POINT FLOW AND HEATTRANSFER OF A VISCOUS FLUID ON A MOVING CIRCULAR CYLINDER [Volume 23, Issue 3, 2010, Pages 287-312]
-
Rahmani, A. A.
Simulation and Genetic Algorithms for Optimizing Comminution Circuit at Gol-e-Gohar Iron Plant (RESEARCH NOTE) [Volume 26, Issue 6, 2013, Pages 663-670]
-
Rahmani, D.
A New Approach Generating Robust and Stable Schedules in m-Machine Flow Shop Scheduling Problems: A Case Study [Volume 33, Issue 2, 2020, Pages 293-303]
-
Rahmani, D.
A Stochastic Model for Prioritized Outpatient Scheduling in a Radiology Center [Volume 33, Issue 4, 2020, Pages 598-606]
-
Rahmani, D.
A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
-
Rahmani, D.
A Novel Hybrid Model for Technology Strategy Formulating in High-tech Industries under Uncertainty: A Case Study [Volume 36, Issue 6, 2023, Pages 1166-1178]
-
Rahmani, F.
Experimental Study on Warm Incremental Tube Forming of AA6063 Aluminum Tubes [Volume 33, Issue 9, 2020, Pages 1773-1779]
-
Rahmani, Najmeh
Analysis of Integral Nonlinearity in Radix-4 Pipelined Analog-to-Digital Converters [Volume 28, Issue 4, 2015, Pages 546-552]
-
Rahmani, Z.
Finite Time Terminal Synergetic Controller for Nonlinear Helicopter Model [Volume 32, Issue 2, 2019, Pages 236-241]
-
Rahmani, Zahra
Designinga Neuro-Sliding Mode Controller for Networked Control Systems with Packet Dropout [Volume 29, Issue 4, 2016, Pages 490-499]
-
Rahmani, Zohreh
Flexural Performance of High-strength Prestressed Concrete-encased Concrete-filled Steel Tube Sections [Volume 32, Issue 9, 2019, Pages 1238-1247]
-
Rahmani-Ahranjani, A.
Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
-
Rahmanian, Sasan
Nonlinear Dynamics of the Rotational Slender Axially Moving String with Simply Supported Conditions [Volume 29, Issue 6, 2016, Pages 834-842]
-
Rahmani Parchicolaie, B.
A Multi Objective Optimization Model for Multi-commodity Closed-loop Supply Chain Network Considering Disruption Risk [Volume 37, Issue 4, 2024, Pages 646-661]
-
Rahmannejad, M
Influence of Curing Time and Water Content on Unconfined Compressive Strength of Sand Stabilized Using Epoxy Resin [Volume 31, Issue 8, 2018, Pages 1187-1195]
-
Rahmannezhad, Javad
Numerical Investigation of Magnetic Field Effects on Mixed Convection Flow in a Nanofluid-filled Lid-driven Cavity [Volume 26, Issue 10, 2013, Pages 1213-1224]
-
Rahmanpour, M.
A Study of Blast–Induced Vibration on Oil Pipelines based on Numerical and Field Analysis [Volume 34, Issue 9, 2021, Pages 2116-2123]
-
Rahmanpour, M.
Performance Evaluation of Artificial Neural Networks and Support Vector Regression in Tunneling-Induced Settlement Prediction Incorporating Umbrella Arch Method Characteristics [Volume 37, Issue 8, 2024, Pages 1510-1521]
-
Rahmanpour, Mehdi
An Approach to Locate an in Pit Crusher in Open Pit Mines [Volume 27, Issue 9, 2014, Pages 1475-1484]
-
Rahmanpour, Mehdi
Resilient Decision Making in Open Pit Short-term Production Planning in Presence of Geologic Uncertainty [Volume 29, Issue 7, 2016, Pages 1022-1028]
-
Rahmanpour, N.
Chemical Composition, Antibacterial and Analgesic Activity of Lavandula stoechas Flowers from North of Iran [Volume 32, Issue 8, 2019, Pages 1065-1073]
-
Rahmanzade, Key armin
Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive [Volume 28, Issue 8, 2015, Pages 1169-1174]
-
Rahmanzadeh, S.
Evaluating Applicability of ASTM C 928 Approach in Assessing Adequacy of Patch Repair of Bridge Piers [Volume 33, Issue 12, 2020, Pages 2455-2463]
-
Rahmat, B.
Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
-
Rahmat, M.
Role of Mixing Method and Solid Content on Printability of Alumina Inks for Stereolithography 3D Printing Process [Volume 35, Issue 3, 2022, Pages 580-586]
-
Rahmdel, Sajad
A New Fuzzy Sliding Mode Controller with Auto-Adjustable Saturation Boundary Layers Implemented on Vehicle Suspension [Volume 26, Issue 12, 2013, Pages 1401-1410]
-
Rahmi, R.
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Rahnama, Kamran
Identification of Volatile Organic Compounds from Trichoderma virens (6011) by GC-MS and Separation of a Bioactive Compound via Nanotechnology [Volume 29, Issue 10, 2016, Pages 1347-1353]
-
Rahnama, M.
Numerical Investigation of Combined Radiation and Nutral Convention Heat Transfer in a Horizonal Annulus [Volume 12, Issue 4, 1999, Pages 259-270]
-
Rahnama, M.
Computational Study of Radiative and Convective Heat Transfer in a Cylindrical Combustion Chamber [Volume 16, Issue 2, 2003, Pages 193-204]
-
Rahnavard, Mohsen
Hot Corrosion Behavior of Functional Graded Material Thermal Barrier Coating (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 101-108]
-
Rai, Piysh
Improving Performance of Mining Equipment Through Enhancement of Speed Factor: A Case Study (Research Note) [Volume 28, Issue 9, 2015, Pages 1392-1400]
-
Rai, Vipun
New Stilling Basins Designs for Deep Rectangular Outlets [Volume 17, Issue 1, 2004, Pages 1-10]
-
Raissi, Babak
AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
-
Raiz Abidin, M.
Monitoring the Built-up Area Transformation Using Urban Index and Normalized Difference Built-up Index Analysis [Volume 32, Issue 5, 2019, Pages 647-653]
-
Raj, S. R.
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Raja, Kandasamy
Prediction Model for CNC Turning on AISI316 with Single and Multilayered Cutting tool Using Box Behnken Design (RESEARCH NOTE) [Volume 26, Issue 4, 2013, Pages 401-410]
-
Rajabi, A. M.
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Rajabi, A. M.
Evaluation of Dynamic Probing Testing Effect in Hand Excavated Pit on Test Results Using Numerical Modeling [Volume 33, Issue 8, 2020, Pages 1553-1559]
-
Rajabi, L.
Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
-
Rajabi, M.
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Rajabi, N.
Effect of Blade Design Parameters on Air Flow through an Axial Fan [Volume 30, Issue 10, 2017, Pages 1583-1591]
-
Rajabipour, Ali
A Fire Ignition Model and Its Application for Estimating Loss due to Damage of the Urban Gas Network in an Earthquake [Volume 29, Issue 11, 2016, Pages 1507-1519]
-
Rajabloo, A.
Second Order Sliding Mode Control of Three Phase Neutral Point Clamped Inverter in Stationary Frame [Volume 37, Issue 8, 2024, Pages 1466-1474]
-
Rajabnejad, H.
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Rajaee, M.
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Rajaee, T.
Solution of Wave Equations Near Seawalls by Finite Element Method [Volume 21, Issue 1, 2008, Pages 1-16]
-
Rajagede, R. A.
Digital Assistant for Pharmacists Using Indonesian Language Based on Rules and Artificial Intelligence [Volume 37, Issue 9, 2024, Pages 1746-1754]
-
Rajaie, H.
Experimental Investigation of the Methods of Evaluating the Bond Strength Between Concrete Substrate and Repair Materials [Volume 15, Issue 4, 2002, Pages 319-332]
-
Rajambal, K
Performance Investigation of Multi-Phase VSI with Simple PWM Switching Techniques [Volume 26, Issue 3, 2013, Pages 289-296]
-
Rajappa, Muthaiah
Improving Bandwidth-power Efficiency of Homogeneous Wireless Networks Using On-meet Threshold Strategy (RESEARCH NOTE) [Volume 27, Issue 9, 2014, Pages 1349-1358]
-
Raja. S, R.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Raja Sekhar, K. S.
A Fault Tolerant Operation of 3-Phase, 5-Level CHBMLI under Open Circuit Fault Conditions [Volume 36, Issue 10, 2023, Pages 1733-1745]
-
Rajashekar, C. R.
Studies on Effect of Injection Timing of Graphene Nanoparticles Blended Simarouba Biodiesel Blend on CI Engine [Volume 30, Issue 8, 2017, Pages 1205-1214]
-
Rajchakit, G.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Rajeev, D
Predictions of Tool Wear in Hard Turning of AISI4140 Steel through Artificial Neural Network, Fuzzy Logic and Regression Models [Volume 31, Issue 1, 2018, Pages 32-37]
-
Rajendran, T. K.
Effective Blended Learning Model Selection Based on Student Learning Style using Analytic Hierarchy Process for an Undergraduate Engineering Course [Volume 36, Issue 12, 2023, Pages 2232-2242]
-
Rajesh Kumar, G
Low Power March Memory Test Algorithm for Static Random Access Memories (TECHNICAL NOTE) [Volume 31, Issue 2, 2018, Pages 292-298]
-
Rajeswara Rao, K. V. S.
Investigation of Wear Behavior of Biopolymers for Total Knee Replacements Through Invitro Experimentation [Volume 33, Issue 8, 2020, Pages 1560-1566]
-
Raji Asadabadi, M. J.
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
-
Rajnish, K.
A New Empirical Model to Increase the Accuracy of Software Cost Estimation (TECHNICAL NOTE) [Volume 30, Issue 10, 2017, Pages 1487-1493]
-
Rajnish, Kumar
Measurement of Complexity and Comprehension of a Program Through a Cognitive Approach [Volume 28, Issue 11, 2015, Pages 1579-1588]
-
Rajput, Ravindra Kumar Singh
Elastico-Viscous Flow between Two Rotating Discs of Different Transpiration for High Reynolds Numbers (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 115-122]
-
Raju, R.
An Adaptively-damped Compressible-liquid Model for Non-cavitating Hydraulic Surges [Volume 33, Issue 10, 2020, Pages 2047-2056]
-
Rakani, F.
Providing an Analytical Model in Determining Nanofluids [Volume 30, Issue 12, 2017, Pages 1919-1924]
-
Rakani, F.
Assessment of Particle-size and Temperature Effect of Nanofluid on Heat Transfer Adopting Lattice Boltzmann Model [Volume 31, Issue 10, 2018, Pages 1749-1759]
-
Rakhshan, Nastaran
Evaluation of Ultimate Torsional Strength of Reinforcement Concrete Beams Using Finite Element Analysis and Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 501-508]
-
Rakhshani, N.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Rakhtala, S. M.
Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers [Volume 35, Issue 8, 2022, Pages 1488-1493]
-
Rakht Ala, Seyed Mehdi
Systematic Approach to Design a Finite Time Convergent Differentiator in Second Order Sliding Mode Controller [Volume 26, Issue 11, 2013, Pages 1357-1368]
-
Rakideh, Mohammad
Crack Detection of Timoshenko Beams Using Vibration Behavior and Neural Network [Volume 26, Issue 12, 2013, Pages 1433-1444]
-
Ram, M.
Turbofan Engine Performance under Reliability Measures Approach [Volume 30, Issue 4, 2017, Pages 610-619]
-
Ram, Mangey
Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]
-
Ram, Mangey
Reliability Measures Improvement and Sensitivity Analysis of a Coal Handling Unit for Thermal Power Plant [Volume 26, Issue 9, 2013, Pages 1059-1066]
-
Ram, Mangey
Modeling and Availability Analysis of Internet Data Center with various Maintenance Policies [Volume 27, Issue 4, 2014, Pages 599-608]
-
Ram, Mangey
Reliability Measures Measurement under Rule-Based Fuzzy Logic Technique [Volume 28, Issue 10, 2015, Pages 1486-1492]
-
Ramachandran, K. P.
Window Air Conditioner with Orthodox Refrigerants [Volume 32, Issue 2, 2019, Pages 322-327]
-
Ramadan, D. O.
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Ramadoss, P.
Effect of Steel Fiber Volume Fraction on the Mechanical Behavior of Ultra-high Performance Concrete Composites [Volume 35, Issue 7, 2022, Pages 1365-1374]
-
Ramadoss, P.
Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
-
Ramakrishna, U.
Experiments on Coupled Technique for Adjacent Similar Buildings [Volume 33, Issue 9, 2020, Pages 1703-1709]
-
Ramalinga Reddy, Y.
Experimental Investigation on Strength, Durability and Micro Structural Characteristics of Slag-Based Cement Mortar [Volume 37, Issue 4, 2024, Pages 763-778]
-
Rama Narasimha, K
Experimental Investigations on the Thermal Performance of a Vertical Closed Loop Pulsating Heat Pipe Using Binary Mixture of Fluids [Volume 31, Issue 5, 2018, Pages 805-811]
-
Rama Rao, P. V. V.
Performance Evaluation of Weighted Feedback Based UPQC under Various Power Quality Issues [Volume 36, Issue 3, 2023, Pages 441-449]
-
Ramavath, S.
Optimal Prediction of Shear Properties in Beam-Column Joints Using Machine Learning Approach [Volume 37, Issue 1, 2024, Pages 67-82]
-
Ramees, M.
Effect of Gap Acceptance Behavior of the Right Turning Vehicles on the Major Road Stream for Uncontrolled Three-Legged Intersections under Mixed Traffic Conditions [Volume 31, Issue 6, 2018, Pages 870-876]
-
Ramesh, R.
Mathematical Modeling and Analysis of Spark Erosion Machining Parameters of Hastelloy C-276 Using Multiple Regression Analysis (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 997-1003]
-
Ramesh, R.
Ballistic Testing and Simulation of Co-continuous Ceramic Composite for Body Armour [Volume 33, Issue 9, 2020, Pages 1792-1796]
-
Rameshbhai, B. J.
Investigating Hostile Post Detection in Gujarati: A Machine Learning Approach [Volume 37, Issue 7, 2024, Pages 1284-1295]
-
Ramezani, Ali
Numerical Investigation of Magnetic Field Effects on Mixed Convection Flow in a Nanofluid-filled Lid-driven Cavity [Volume 26, Issue 10, 2013, Pages 1213-1224]
-
Ramezani, M.
Risk-Based AC/DC Hybrid Distribution System Planning [Volume 37, Issue 5, 2024, Pages 876-886]
-
Ramezani Saadatabadi, A.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Ramiar, A.
Diagnostics Devices for Improving the World: μPADs Integrated with Smartphone for Colorimetric Detection of Dopamine [Volume 35, Issue 9, 2022, Pages 1723-1727]
-
Ramiar, A.
Earth-to-air Heat Exchanger for Cooling Applications in a Hot and Dry Climate: Numerical and Experimental Study [Volume 36, Issue 1, 2023, Pages 78-89]
-
Ramiar, Abas
The Effect of Viscous Dissipation and Variable Properties on Nanofluids Flow in Two Dimensional Microchannels [Volume 24, Issue 2, 2011, Pages 131-142]
-
Ramin, farzin
Effect of Deflected Membrane Electrode Assembly on Species Distribution in PEMFC [Volume 28, Issue 3, 2015, Pages 467-475]
-
Ramli, M. K. N
Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation [Volume 31, Issue 8, 2018, Pages 1446-1454]
-
Ramli, R.
Optimal Selection of Cutting Parameters for Surface Roughness in Milling Machining of AA6061-T6 [Volume 35, Issue 6, 2022, Pages 1170-1177]
-
Ramtani, S.
Metallurgical and Mechanical Behavior of AISI 316- AISI 304 during Friction Welding Process [Volume 32, Issue 2, 2019, Pages 306-312]
-
Ramtani, S.
Experimental Investigation of Friction Pressure Influence on the Characterizations of Friction Welding Joint for AISI 316 [Volume 33, Issue 12, 2020, Pages 2514-2520]
-
Ramtani, S.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Ramtekkar, G.
Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
-
Ramtekkar, G.
Effect of Particle Size, Moisture Content and Density on the Hyperbolic Model Parameters for Non-cohesive Soil [Volume 35, Issue 9, 2022, Pages 1699-1706]
-
Ramyar, R.
Earth-to-air Heat Exchanger for Cooling Applications in a Hot and Dry Climate: Numerical and Experimental Study [Volume 36, Issue 1, 2023, Pages 78-89]
-
Rana, K.
Investigating Hostile Post Detection in Gujarati: A Machine Learning Approach [Volume 37, Issue 7, 2024, Pages 1284-1295]
-
Rana, U S
Thermosolutal Convection of Micropolar Rotating Fluids Saturating a Porous Medium [Volume 22, Issue 4, 2009, Pages 379-404]
-
Rana, U S
Numerical Solution of Pricing of European Put Option with Stochastic Volatility [Volume 24, Issue 2, 2011, Pages 189-202]
-
Rana, U S
Damped Vibrations of Parabolic Tapered Non-homogeneous Infinite Rectangular Plate Resting on Elastic Foundation (RESEARCH NOTE) [Volume 28, Issue 7, 2015, Pages 1082-1089]
-
Rana, U. S.
Thermal Convection of Rotating Micropolar Fluid in Hydromagnetics Saturating A Porous Medium [Volume 21, Issue 4, 2008, Pages 375-396]
-
Rana, U.S.
Mathematical Modeling for Homogeneous Tumor with Delay in Time [Volume 22, Issue 1, 2009, Pages 49-56]
-
Ranga, V
Intelligent Traffic Management System for Prioritizing Emergency Vehicles in a Smart City (TECHNICAL NOTE) [Volume 31, Issue 2, 2018, Pages 278-283]
-
Ranga Rao, V.
Eco-friendly Blocks by Blended Materials [Volume 30, Issue 5, 2017, Pages 636-642]
-
Rani, D.Elizabeth
Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
-
Ranjan, R.
An Expert System Based on Type-1 Fuzzy Logic and Digital Image Processing for Knowledge Based Edge and Contour Detection [Volume 36, Issue 7, 2023, Pages 1278-1286]
-
Ranjbar, A.
Hybrid Artificial Intelligence Model Development for Roller-compacted Concrete Compressive Strength Estimation [Volume 33, Issue 10, 2020, Pages 1852-1863]
-
Ranjbar, A. A.
A Numerical Simulation of Vanadium Redox Flow Batteries [Volume 32, Issue 1, 2019, Pages 153-161]
-
Ranjbar, Abolfazl
A Solution of Riccati Nonlinear Differential Equation using Enhanced Homotopy Perturbation Method (EHPM) [Volume 21, Issue 1, 2008, Pages 27-38]
-
Ranjbar, Abolfazl
The Effect of Viscous Dissipation and Variable Properties on Nanofluids Flow in Two Dimensional Microchannels [Volume 24, Issue 2, 2011, Pages 131-142]
-
Ranjbar, Abolfazl
Using Modified IPSO-SQP Algorithm to Solve Nonlinear Time Optimal Bang-Bang Control Problem [Volume 26, Issue 11, 2013, Pages 1307-1322]
-
Ranjbar, Abolfazl
Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control [Volume 27, Issue 7, 2014, Pages 1071-1080]
-
Ranjbar, Ali Akbar
Numerical and Experimental Analysis of Thermal Boundary Conditions of HDD-Engine Cylinder Head for Different Combustion and Fuel [(Articles in Press)]
-
Ranjbar, Ali Akbar
Experimental analysis of subcooled flow boiling heat flux on gray cast iron block in heavy-duty diesel engine-like conditions: Optimization using central composite design [(Articles in Press)]
-
Ranjbar, A. M.
Digital Distance Relaying [Volume 1, Issue 1, 1988, Pages 53-62]
-
Ranjbar, A. M.
Coordinated Control of Doubley Fed Induction Generator Virtual Inertia and Power System Oscillation Damping Using Fuzzy Logic [Volume 32, Issue 4, 2019, Pages 536-547]
-
Ranjbar, Faramarz
Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints [Volume 28, Issue 4, 2015, Pages 618-626]
-
Ranjbar, J.
A Novel Method for Detecting Targets on Inactive Radars Using an Adaptive Processing on the Ambiguity Function (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 916-920]
-
Ranjbar, M.
Prediction of Sulfate Scale Depositions in Oilfield Operations Using Arithmetic of LR Fuzzy Numbers [Volume 19, Issue 1, 2006, Pages 99-106]
-
Ranjbar, M.
Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 814-820]
-
Ranjbar, M.M.
Shear Capacity of Reinforced Concrete Flat Slabs Made with High-strength Concrete: A Numerical Study of the Effect of Size, Location, and Shape of the Opening (TECHNICAL NOTE) [Volume 30, Issue 2, 2017, Pages 162-171]
-
Ranjbar, Mohammad Reza
Economic Aspect of Fuel Cell Power as Distributed Generation [Volume 27, Issue 1, 2014, Pages 57-62]
-
Ranjbaran, A.
A New Approach for Buckling and Vibration Analysis of Cracked Column. [Volume 21, Issue 3, 2008, Pages 225-230]
-
Ranjbaran, Ali
Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method [Volume 32, Issue 6, 2019, Pages 860-865]
-
Ranjbar-Bourani, M.
A New Multi-Objective Model for a Cell Formation Problem Considering Machine Utilization and Alternative Process Routes (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 21-32]
-
Ranjbar-Bourani, M.
Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
-
Ranjbari, Gohar
Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA [Volume 29, Issue 9, 2016, Pages 1307-1313]
-
Ranjbar N., A.
Finite Time Terminal Synergetic Controller for Nonlinear Helicopter Model [Volume 32, Issue 2, 2019, Pages 236-241]
-
Ranjbar Noei, Abolfazl
Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
-
Ranjith, A.
Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
-
Ransinchung R. N., G. D.
Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
-
Rao, C. B. K.
Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers [Volume 33, Issue 8, 2020, Pages 1465-1471]
-
Rao Chintalapudi, S.
Mining Overlapping Communities in Real-world Networks Based on Extended Modularity Gain [Volume 30, Issue 4, 2017, Pages 486-492]
-
Raoofat, M.
Hydrothermal Optimal Power Flow Using Continuation Method [Volume 14, Issue 2, 2001, Pages 113-122]
-
Raoof Mahjoob, A. M.
Pavement Maintenance Management Using Multi-objective Optimization: (Case Study: Wasit Governorate-Iraq) [Volume 33, Issue 11, 2020, Pages 2155-2161]
-
Raoufpanah, A.
Effects of Slip Condition on the Characteristic of Flow in Ice Melting Process [Volume 18, Issue 3, 2005, Pages 253-261]
-
Raouf Sheybani, H.
Impacts of Premium Bounds on the Operation of Put Option and Day-ahead Electricity Markets [Volume 30, Issue 11, 2017, Pages 1752-1761]
-
Rasay, H
Application of Multivariate Control Charts for Condition Based Maintenance [Volume 31, Issue 4, 2018, Pages 597-604]
-
Rasay, H.
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Rasekhi, J.
A New Structure for Direct Measurement of Temperature Based on Negative Temperature Coefficient Thermistor and Adaptive Neuro-fuzzy Inference System [Volume 31, Issue 10, 2018, Pages 1682-1688]
-
Rasekhi, Jalil
Traffic Signal Prediction Using Elman Neural Network and Particle Swarm Optimization [Volume 29, Issue 11, 2016, Pages 1558-1564]
-
Rashahmadi, S
The Effects of Newmark Method Parameters on Errors in Dynamic Extended Finite Element Method Using Response Surface Method [Volume 31, Issue 1, 2018, Pages 50-57]
-
Rashahmadi, S.
The Effect of TiO2 Nanoparticles on Mechanical Properties of Poly Methyl Methacrylate Nanocomposites (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 807-813]
-
Rashed-Mohassel, J.
Dual-band, Dynamically Tunable Plasmonic Metamaterial Absorbers Based on Graphene for Terahertz Frequencies [Volume 32, Issue 4, 2019, Pages 503-509]
-
Rashed-Mohassel, Jalil
On the Optimum Directivity of Uniformly Spaced Broadside Arrays of Parallel Half-Wave Dipoles (RESEARCH NOTES) [Volume 9, Issue 1, 1996, Pages 51-56]
-
Rashed-Mohassel, Jalil
Quasi-Static Theory for Uniaxial Chiral Omega Media [Volume 16, Issue 3, 2003, Pages 233-246]
-
Rashed-Mohassel, Jalil
Significant Error Propagation in the Finite Difference Solution of Non-Linear Magnetostatic Problems Utilizing Boundary Condition of the Third Kind [Volume 16, Issue 4, 2003, Pages 319-330]
-
Rashed-Mohassel, Jalil
Optimization of Array Factor in Linear Arrays Using Modified Genetic Algorithm [Volume 17, Issue 4, 2004, Pages 367-380]
-
Rashed-Mohassel, Jalil
Auxiliary Potentials In Chiral Media [Volume 20, Issue 2, 2007, Pages 147-158]
-
Rashed-Mohassel, Jalil
Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
-
Rashed-Mohassel, Jalil
A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies [Volume 30, Issue 3, 2017, Pages 338-343]
-
Rasheed, M. H.
Adaptive Polynomial Coding of Multi-base Hybrid Compression [Volume 36, Issue 2, 2023, Pages 236-252]
-
Rashid, A. Q. A
Hydrophobicity Properties of Graphite and Reduced Graphene Oxide of The Polysulfone (PSf) Mixed Matrix Membrane [Volume 31, Issue 8, 2018, Pages 1381-1388]
-
Rashid, A. Q. A
The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
-
Rashidi, Ali morad
An Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 411-416]
-
Rashidi, F.
Cost-based Risk Approach for Spinning Reserve Assessment in Bulk Power Systems [Volume 35, Issue 11, 2022, Pages 2186-2195]
-
Rashidi, M. M.
HOMOTOPY PERTURBATION METHOD FOR SOLVING FLOW IN THE EXTRUSION PROCESSES [Volume 23, Issue 3, 2010, Pages 267-272]
-
Rashidi, M. M.
Investigating the Effect of Clearance Distance between the Floor of a High-speed Train and Ground on Aerodynamic Forces in Presence of Side Wind [Volume 36, Issue 4, 2023, Pages 604-614]
-
Rashidi, Zahra
Energy and Throughput Management in WBAN with Wireless Information and Energy Transfer using Reinforcement Learning [(Articles in Press)]
-
Rashidi Rad, P.
Technical and Economical Approaches in Application of Micro Silica Gel and Calcium Carbonate Powder in Self-compacting Concrete [Volume 35, Issue 4, 2022, Pages 760-773]
-
Rashno, A.
Content-based Image Retrieval Speedup Based on Optimized Combination of Wavelet and Zernike Features Using Particle Swarm Optimization Algorithm [Volume 33, Issue 5, 2020, Pages 1000-1009]
-
Rashno, A.
A New Framework for Canny Edge Detector in Hexagonal Lattice [Volume 35, Issue 8, 2022, Pages 1588-1598]
-
Rashno, A.
Image Restoration by Projection onto Convex Sets with Particle Swarm Parameter Optimization [Volume 36, Issue 2, 2023, Pages 398-407]
-
Rashtchian, D.
Hydrogen Distribution in Refinery with Nonlinear Programming [Volume 18, Issue 2, 2005, Pages 165-176]
-
Rashtian, M.
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Rashtian, Mohammad
A Novel Structure for Realization of a Pseudo Two Path Band-Pass Filter [Volume 23, Issue 3, 2010, Pages 201-208]
-
Rashtiani, Y.
Nitinol Spinal Vertebrae: A Favorable New Substitute [Volume 32, Issue 6, 2019, Pages 842-851]
-
Rashvand, Kaveh
Effect of Length-scale Parameter on Pull-in Voltage and Natural Frequency of a Micro-plate [Volume 27, Issue 3, 2014, Pages 375-384]
-
Rasiq, S. M.
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Rasouli, N.
Coordination of Pricing and Order Quantity for Two Replaceable and Seasonal Products [Volume 33, Issue 3, 2020, Pages 439-447]
-
Rasouli, Nadia
Joint Pricing and Inventory Control for Seasonal and Substitutable Goods Mentioning the Symmetrical and Asymmetrical Substitution [Volume 27, Issue 9, 2014, Pages 1385-1394]
-
Rasouli, Pouyan
Fingertip Radius Effect of an on-Surface-Manipulated Object [Volume 30, Issue 1, 2017, Pages 134-142]
-
Rasouli, sousan
Electrophoretic Deposition of Microwave Combustion Synthesized Hydroxyapatite and Its Carbon Nanotube Reinforced Nanocomposite on 316L Stainless Steel [Volume 25, Issue 4, 2012, Pages 329-336]
-
Rasouli Khatir, M
Virtual Flux Based Direct Power Control on Vienna Rectifier [Volume 31, Issue 2, 2018, Pages 284-291]
-
Rassafi, Amir Abbas
Benchmarking Sustainability with Respect to Transportation Supply and Demand [Volume 17, Issue 4, 2004, Pages 357-368]
-
Rastani, S
Process Optimization of Deposition Conditions for Low Temperature Thin Film Insulators used in Thin Film Transistors Displays [Volume 31, Issue 5, 2018, Pages 712-718]
-
Rastani, Sina
Designing Incomplete Hub Location-routing Network in Urban Transportation Problem [Volume 26, Issue 9, 2013, Pages 997-1006]
-
Rastbood, A.
Fixing of Cycle Slips in Dual-Frequency GPS Phase Observables using Discrete Wavelet Transforms [Volume 21, Issue 1, 2008, Pages 9-26]
-
Rastegari, Yousef
Web Service Choreography Verification Using Z Formal Specification [Volume 29, Issue 11, 2016, Pages 1549-1557]
-
Rastgar, Mehdi
Field Study and Evaluation of Buckling Behavior of Cylindrical Steel Tanks with Geometric Imperfections under Uniform External Pressure [Volume 30, Issue 9, 2017, Pages 1309-1318]
-
Rasti, A.R
Parameters Analysis of the Covering Soil of Tunnels Constructed In Liquefiable Soils [Volume 25, Issue 4, 2012, Pages 333-346]
-
Rasti, Batul
Improving the Performance of Bayesian Estimation Methods in Estimations of Shift Point and Comparison with MLE Approach [Volume 27, Issue 6, 2014, Pages 921-932]
-
Rasti-Barzoki, M.
Coordinating Order Acceptance and Batch Delivery for an Integrated Supply Chain Scheduling [Volume 30, Issue 5, 2017, Pages 700-709]
-
Rastkerdar, E
Parametric Optimization of Electro Spark Microwelding of Aluminum Clad Steel (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1146-1151]
-
Rasulibaghban, Arezo
Distribution Design of Two Rival Decenteralized Supply Chains: a Two-person Nonzero Sum Game Theory Approach [Volume 27, Issue 8, 2014, Pages 1233-1242]
-
Rath, B.
Durable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials [Volume 30, Issue 7, 2017, Pages 964-971]
-
Rath, Mahendra
Exergy and Energy Analysis of Diesel Engine using Karanja Methyl Ester under Varying Compression Ratio [Volume 27, Issue 8, 2014, Pages 1259-1268]
-
Rathod, A. M.
Heat Transfer Augmentation for Impingement of Steady Air Jet under Exponential Heat Flux Boundary Condition [Volume 37, Issue 5, 2024, Pages 920-930]
-
Rathore, S.
Economic Production Quantity Models with Shortage, Price and Stock-Dependent Demand for Deteriorating Items [Volume 20, Issue 2, 2007, Pages 159-168]
-
Ravangard, A.
Investigation of Microstructure and Mechanical Properties of Newly Developed Advanced High Strength TRIP Steel [Volume 35, Issue 3, 2022, Pages 567-571]
-
Ravelev, K. A.
Influence of Geological and Technological Parameters on Effectiveness of Hydrochloric Acid Treatment of Carbonate Reservoirs [Volume 33, Issue 10, 2020, Pages 2113-2119]
-
Ravi, P. S.
Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant [Volume 30, Issue 4, 2017, Pages 558-566]
-
Ravichandran, P. T.
Stimulation Behaviour Study on Clay Treated with Ground Granulated Blast Slag and Groundnutshell Ash [Volume 32, Issue 5, 2019, Pages 673-678]
-
Ravichandran, P. T.
Recent Trends in Stabilization of Expansive Soil using Calcined Clay [Volume 36, Issue 1, 2023, Pages 163-170]
-
Ravikumar, K. P.
Effect of Hexagonal Boron Nitrate on Microstructure and Mechanical Behavior of Al7075 Metal Matrix Composite Producing by Stir Casting Technique [Volume 32, Issue 7, 2019, Pages 1017-1022]
-
Ravikumar, S.
Influencing Parameters of Exterior Reinforced Concrete Beam-Column Joint Shear Strength: A Depth Review of Recent Advances [Volume 35, Issue 5, 2022, Pages 931-942]
-
Ravikumar, S.
Experimental Study on Performance of Ductile and Non-ductile Reinforced Concrete Exterior Beam-column Joint [Volume 35, Issue 7, 2022, Pages 1237-1245]
-
Ravikumar, T.
Reduction of Odometry Error in a two Wheeled Differential Drive Robot (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 359-366]
-
Ravishankar, D. V.
Analysis of Milling Process Parameters and their Influence on Glass Fiber Reinforced Polymer Composites (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1074-1080]
-
Ravishankar, K. V. R.
Effect of Gap Acceptance Behavior of the Right Turning Vehicles on the Major Road Stream for Uncontrolled Three-Legged Intersections under Mixed Traffic Conditions [Volume 31, Issue 6, 2018, Pages 870-876]
-
Ravi Srinivas, L.
Performance Evaluation of Weighted Feedback Based UPQC under Various Power Quality Issues [Volume 36, Issue 3, 2023, Pages 441-449]
-
Rayatnia, A.
Common Spatial Patterns Feature Extraction and Support Vector Machine Classification for Motor Imagery with the SecondBrain [Volume 32, Issue 9, 2019, Pages 1284-1289]
-
Rayhan, S. B.
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Raza, R. S.
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Razaghi, R.
Modeling and Multi-Objective Optimization of Stall Control on NACA0015 Airfoil with a Synthetic Jet using GMDH Type Neural Networks and Genetic Algorithms [Volume 22, Issue 1, 2009, Pages 69-88]
-
Razavi, A.R.
The Causes of Local Hardness Increasing in Powerplant Rotors and its Modification by Tempering (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 267-274]
-
Razavi, A.R.
An Investigation on the Causes of a Rotor Bending and its Thermal Straightening (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 281-290]
-
Razavi, H.
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Razavi, J.
Solid State Fermentation for Production of Chitosan by Aspergillus Niger [Volume 22, Issue 1, 2009, Pages 1-6]
-
Razavi, M.
Electrokinetic and Sediment Remediation in Microbial Fuel Cell (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 489-494]
-
Razavi, Mansour
Synthesis of TiC-Al2O3 Nanocomposite from Impure TiO2 by Mechanical Activated Sintering [Volume 21, Issue 3, 2008, Pages 275-280]
-
Razavi, Mansour
Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages [Volume 22, Issue 2, 2009, Pages 169-178]
-
Razavi, S.
Proposing New Artificial Intelligence Models to Estimate Shear Wave Velocity of Fine-grained Soils: A Case Study [Volume 37, Issue 6, 2024, Pages 1164-1174]
-
Razavi, S. E.
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Razavi, Seyed Esmaeil
Prediction of Physical Delay Period RiDirect Injection Diesel Engine Combustion [Volume 4, Issue 3, 1991, Pages 141-148]
-
Razavi, Seyed Esmaeil
Finite Volume Solution of a Cylinder in Cross Flow with Heat Transfer [Volume 15, Issue 3, 2002, Pages 303-314]
-
Razavi, Seyed Esmaeil
A Characteristic-based Solution of Forced and Free Convection in Closed Domains with Emphasis on Various Fluids [Volume 32, Issue 11, 2019, Pages 1689-1695]
-
Razavi, Seyed Esmaeil
A Characteristic-based Numerical Simulation of Water-titanium Dioxide Nano-fluid in Closed Domains [Volume 33, Issue 1, 2020, Pages 158-163]
-
Razavi, Seyed Esmail
Numerical Study on Hydrodynamics and Heat Transfer Characteristics Around a Cylinder with Inclined Splitter Plates [Volume 29, Issue 4, 2016, Pages 546-553]
-
Razavian Amrei, S.A.
Probabilistic Seismic Hazard Assessment of Tehran Based on Arias Intensity [Volume 23, Issue 1, 2010, Pages 1-20]
-
Razavi Tousi, Seyed Salman -
Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages [Volume 22, Issue 2, 2009, Pages 169-178]
-
Razeghi, A.
A Novel Metamaterial Microelectromechanical Systems Phase Shifter with High Phase Shift and High Bandwidth [Volume 32, Issue 8, 2019, Pages 1163-1168]
-
Razeghi, Alieh
A New Design of Dual Band Phase Shifter using MEMS Technology [Volume 26, Issue 11, 2013, Pages 1337-1346]
-
Razi, Peyaman
Numerical Solution of Fence Performance for Reduction of Sand Deposition on Railway Tracks [Volume 29, Issue 7, 2016, Pages 1014-1021]
-
Razi, S.
Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique [Volume 15, Issue 2, 2002, Pages 167-172]
-
Razlan, Z. M.
An Analysis on Performance of Pico-hydro with Archimedes Screw Model Viewed from Turbine Shaft Angle [Volume 36, Issue 1, 2023, Pages 10-18]
-
Razmi, F.
An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
-
Razmi, J.
Minimizing the supplying cost of leverage items: a mathematical approach [Volume 24, Issue 3, 2011, Pages 259-274]
-
Razmi, Jafar
Integrated Competitive Pricing and Transshipment Problem for Short Life Cycle Products’ Supply Chain [Volume 32, Issue 8, 2019, Pages 1192-1199]
-
Razmjooei, Dariush
Improving Linearity of CMOS Variable-gain Amplifier Using Third-order Intermodulation Cancellation Mechanism and Intermodulation Distortion Sinking Techniques [Volume 30, Issue 2, 2017, Pages 192-198]
-
Razmkhah, M. H.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Razmyan, Sanaz
Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
-
Razzaghi, Talayeh
The optimal energy carriers substitutes in thermal power plants:A fuzzy linear programming model [Volume 25, Issue 1, 2012, Pages 55-66]
-
Razzazi, M.R.
Design and Implementation of a Software System for Detecting Orthographical or Morphological Errors in Persian Words [Volume 20, Issue 2, 2007, Pages 127-132]
-
Reaz Kashyzadeh, K.
Taguchi Approach and Response Surface Analysis for Design of a High-performance Single-walled Carbon Nanotube Bundle Interconnects in a Full Adder [Volume 33, Issue 8, 2020, Pages 1598-1607]
-
Reddy, Krishna
Multi Objective Optimization on Insulated Residential Roof with Solar Water Heating System Using Grey Relation Analysis (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1620-1627]
-
Reddy, P. R.
Performance and Emission Characteristics of a Diesel Engine with Cottonseed Oil Plus Diesel Oil Blends [Volume 18, Issue 1, 2005, Pages 1-7]
-
Reddy, Pranay Kumar
Multi Objective Optimization on Insulated Residential Roof with Solar Water Heating System Using Grey Relation Analysis (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1620-1627]
-
Reddy, S.H.
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Reddy, S. K.
Eco-friendly Hybrid Concrete Using Pozzolanic Binder and Glass Fibers [Volume 33, Issue 7, 2020, Pages 1183-1191]
-
Reddy P., S.
Multimodal Spatiotemporal Feature Map for Dynamic Gesture Recognition from Real Time Video Sequences [Volume 36, Issue 8, 2023, Pages 1440-1448]
-
Redondo, A.
Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
-
R. El-sissy, A.
Mechanical and Microstructural Evaluation of AA6082-T61 Joints Produced by Ultrasonic Vibration Assisted Friction Stir Welding Process [Volume 35, Issue 12, 2022, Pages 2297-2304]
-
Ren, J. J.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Renuka Devi, G
Performance Investigation of Multi-Phase VSI with Simple PWM Switching Techniques [Volume 26, Issue 3, 2013, Pages 289-296]
-
Resen, A. M.
Laser Scanning Speed Influences on Assessment of Laser Remelted Commercially Pure Titanium Grade 2 [Volume 37, Issue 1, 2024, Pages 178-186]
-
Restrepo, J. J.
Control of Formation of Intermetallic Compound in Dissimilar Joints Aluminum-steel [Volume 32, Issue 1, 2019, Pages 127-136]
-
Rezaee, S.
Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater [Volume 32, Issue 1, 2019, Pages 10-17]
-
Rezaee nik, Ebrahim
Power plant project risk assessment using a fuzzy-ANP and fuzzy-TOPSIS method [Volume 25, Issue 2, 2012, Pages 107-120]
-
Rezaeepazhand, Jalil
A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads [Volume 24, Issue 4, 2011, Pages 341-350]
-
Rezaeepazhand, Jalil
Simplified Approach for Torsional Analysis of Non-homogenous Tubes with Non-circular Cross-sections [Volume 25, Issue 3, 2012, Pages 277-288]
-
Rezaeepazhand, Jalil
Effect of Corner Bluntness on Energy Absorbing Capability of Non-circular Metallic Tubes Subjected to Axial Impact [Volume 26, Issue 8, 2013, Pages 875-884]
-
Rezaei, A.
Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology [Volume 32, Issue 2, 2019, Pages 328-337]
-
Rezaei, Aryo
Aeolian Vibrations of Transmission Line Conductors with More than One Damper [Volume 28, Issue 10, 2015, Pages 1515-1524]
-
Rezaei, E.
Experimental Investigation of Spur Gear Tooth Crack Location and Depth Detection using Short-time Averaging Method and Statistical Indicators [Volume 33, Issue 10, 2020, Pages 2079-2086]
-
Rezaei, F.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Rezaei, H.
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Rezaei, Hossein
Assessment of Goodness of Fit Methods in Determining the Best Regional Probability Distribution of Rainfall Data [Volume 27, Issue 10, 2014, Pages 1537-1546]
-
Rezaei, H. R.
Re-configuration of the Relief Network Considering Uncertain Demand and Link Failure in an Earthquake: A Multi-stage Stochastic Programming [Volume 31, Issue 6, 2018, Pages 932-942]
-
Rezaei, M.
A New Approach to Provide High Water Permeable Polyethersulfone based Nanofiltration Membrane by Air Plasma Treatment [Volume 32, Issue 3, 2019, Pages 354-359]
-
Rezaei, M.
Experimental Investigation of Spur Gear Tooth Crack Location and Depth Detection using Short-time Averaging Method and Statistical Indicators [Volume 33, Issue 10, 2020, Pages 2079-2086]
-
Rezaei, M.
Challenges of Generation and Transmission Expansion Planning Considering Power System Resilience and Provide Solutions [Volume 36, Issue 5, 2023, Pages 824-841]
-
Rezaei, M.
Investigation of Laser Cutting of Thin Polymethyl Methacrylate Sheets by Response Surface Methodology [Volume 37, Issue 3, 2024, Pages 484-495]
-
Rezaei, Mohammad Javad
Effect of Collars and Bars in Reducing the Local Scour Around Cylindrical Bridge Piers [Volume 22, Issue 4, 2009, Pages 333-342]
-
Rezaei, Pejman
Parametric Study of UC-PBG Structure in Terms of Simultaneous AMC and EBG Properties and its Applications in Proximity-coupled Fractal Patch Antenna [Volume 25, Issue 4, 2012, Pages 347-354]
-
Rezaei, Pejman
A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 715-722]
-
Rezaei, S.
Separation of Curcumin from Curcuma longa L. and its Conjugation with Silica Nanoparticles for Anti-cancer Activities [Volume 31, Issue 11, 2018, Pages 1803-1809]
-
Rezaei, S. E.
Fluoride Precipitation of Cu Over Fe in a Selected pH Window [Volume 32, Issue 3, 2019, Pages 424-429]
-
Rezaeian Zeidi, J.
Pareto-based Multi-criteria Evolutionary Algorithm for Parallel Machines Scheduling Problem with Sequence-dependent Setup Times [Volume 30, Issue 12, 2017, Pages 1863-1869]
-
Rezaei Darestani, Mahdy
Predictive Controlled GSP Performance Improvement with an Integrated ℋ2/ℋ∞ (TECHNICAL NOTE) [Volume 26, Issue 11, 2013, Pages 1289-1298]
-
Rezaei Dolaghb, H.
Sensitivity Analysis of Vibration Response of Railway Structures to Velocity of Moving Load and Various Depth of Elastic Foundation [Volume 33, Issue 3, 2020, Pages 401-409]
-
Rezaei Soufi, Hojat
Designing a Reliable Distribution Network with Facility Fortification and Transshipment under Partial and Complete Disruptions [Volume 29, Issue 9, 2016, Pages 1273-1281]
-
Rezaeizadeh, Masoud
A New Procedure of Impact Wearevaluation of Mill Liner (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 593-598]
-
Rezai, B.
the Benefication Studies of Garnet Deposits From Kohe-E-Garbi Area of Iran (TECHNICAL NOTE) [Volume 12, Issue 2, 1999, Pages 123-135]
-
Rezai, B.
Comparative Cyanide and Thiourea Extraction of Gold Based on Characterization Studies (TECHNICAL NOTE) [Volume 16, Issue 1, 2003, Pages 97-102]
-
Rezai, H.
Energy Aware Resource Management of Cloud Data Centers [Volume 30, Issue 11, 2017, Pages 1730-1739]
-
Rezaie, Behrooz
Designinga Neuro-Sliding Mode Controller for Networked Control Systems with Packet Dropout [Volume 29, Issue 4, 2016, Pages 490-499]
-
Rezaie, Nasrin
A Comparative Study on Performance of Two Aerobic Sequencing Batch Reactors with Flocculated and Granulated Sludge Treating an Industrial Estate Wastewater: Process Analysis and Modeling [Volume 26, Issue 2, 2013, Pages 105-116]
-
Rezaiee Pajand, M.
Explicit Stiffness of Tapered and Monosymmetric i Beam-Columns [Volume 13, Issue 2, 2000, Pages 1-18]
-
Rezaiee Pajand, M.
Nonlinear Analysis of Truss Structures Using Dynamic Relaxation (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 11-22]
-
Rezaiee Pajand, M.
Some Geometrical Bases for Incremental-Iterative Methods (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 245-256]
-
Rezaiee Pajand, M.
A CLOSED-FORM NON- LINEAR SOLUTION FOR PLASTIC FLANGE WRINKLING OF CIRCULAR PLATES IN DEEP DRAWING PROCESS [Volume 23, Issue 3, 2010, Pages 203-214]
-
Rezaiee Pajand, M.
Nonlinear Numerical Integration Scheme in Strain Space Plasticity [Volume 24, Issue 1, 2011, Pages 1-13]
-
Rezaiee Pajand, M.
Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
-
Rezaiee Pajand, M.
Calibration of Hardening Rules for Cyclic Plasticity [Volume 26, Issue 4, 2013, Pages 351-364]
-
Rezaiee Pajand, M.
Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames [Volume 30, Issue 1, 2017, Pages 30-39]
-
Rezaiee-Pajand, M
Free Vibration of a Generalized Plane Frame [Volume 31, Issue 4, 2018, Pages 538-547]
-
Rezaiee-Pajand, M.
Three Different Methods for Approximate Analysis of Bar Structures [Volume 33, Issue 1, 2020, Pages 47-54]
-
Rezaifar, Omid
Comparison of using Different Modeling Techniques on the Prediction of the Nonlinear Behavior of R/C Shear Walls [Volume 27, Issue 2, 2014, Pages 269-282]
-
Reza Kashyzadeh, K.
Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
-
Reza Kashyzadeh, K.
Effects of Drying Temperature and Aggregate Shape on the Concrete Compressive Strength: Experiments and Data Mining Techniques [Volume 33, Issue 9, 2020, Pages 1780-1791]
-
Reza Kashyzadeh, K.
Experimental and Numerical Analysis of Permeability in Porous Media [Volume 33, Issue 11, 2020, Pages 2408-2415]
-
Reza Kashyzadeh, K.
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Reza Kashyzadeh, K.
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
-
Rezala, A.
Analysis Randon Causes Repeatability Errors Inducted by Friction at Joints in Industrial Robots [Volume 35, Issue 2, 2022, Pages 451-457]
-
Rezala, A.
Experimental Study of Thermal Ageing and Hydrogen Embrittlement Effect on the Equipments of a Rocket Engine [Volume 37, Issue 1, 2024, Pages 56-66]
-
Rezanejad, M.
An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
-
Rezanejad, M.
Energy Management of an Integrated PV/Battery/Electric Vehicles Energy System Interfaced by a Multi-port Converter [Volume 36, Issue 8, 2023, Pages 1520-1531]
-
Rezanejad, Mohamamd
A High Gain Bipolar Pulse Generator with Low Voltage Input Source [Volume 32, Issue 8, 2019, Pages 1126-1133]
-
Rezanezhad, S.
Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy [Volume 32, Issue 1, 2019, Pages 92-98]
-
Rezapoor, B.
Modeling of the Combustion Oscillations and Soot Formation in Aerovalved Pulse Combustors [Volume 16, Issue 3, 2003, Pages 293-306]
-
Rezavand, A.
Modeling of A Single Turn Pulsating Heat Pipe based on Flow Boiling and Condensation Phenomena [Volume 32, Issue 4, 2019, Pages 569-579]
-
Rezayat, M.
A General Boundary-Integral Formulation for Zoned Three-Dimensional Media [Volume 6, Issue 4, 1993, Pages 159-168]
-
Rezaye abbasi charkhi, Mina
Process Capability Index for Logistic Regression Profile Based on Spmk Index [Volume 28, Issue 8, 2015, Pages 1186-1192]
-
Rezayibana, B.
The Effect of Soil Type on Seismic Response of Tall Telecommunication Towers with Random Vibration Analysis [Volume 33, Issue 3, 2020, Pages 419-426]
-
Rezazad, Ata
A Congested Double Path Approach for a Hub Location-allocation Problem with Service Level at Hubs [Volume 28, Issue 7, 2015, Pages 1049-1058]
-
Rezazadeh, G
Quality Factor of Free In-plane Vibration of a Fully Clamped Rectangular Micro-plate [Volume 31, Issue 1, 2018, Pages 96-103]
-
Rezazadeh, G.
Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
-
Rezazadeh, G.
Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
-
Rezazadeh, G.
Generating and Focusing the Ultrasound Waves Using Elastomer-based Capacitive Micro-Speakers [Volume 33, Issue 2, 2020, Pages 320-328]
-
Rezazadeh, G.
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Rezazadeh, Ghader
Stability Analysis in Parametrically Excited Electrostatic Torsional Micro-actuators [Volume 27, Issue 3, 2014, Pages 487-498]
-
Rezazadeh, M.
Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm [Volume 33, Issue 5, 2020, Pages 712-719]
-
Rezazadeh, R.
Optimization of Line of Magnetite Recovery from Wet Tailings by Creating Second Medium Intensity Magnetic Field (Case Study: Processing Plant of Gol-e-Gohar Hematite) [Volume 35, Issue 8, 2022, Pages 1608-1618]
-
Rezazadeh, V.
Effect of Carbon Nanotube and Surfactant on Processing, Mechanical, Electrical and EMI-Shielding of Epoxy Composites [Volume 31, Issue 11, 2018, Pages 1810-1815]
-
Rezvani, Fazllolah
Evaluation of Cell Growth and Substrate Consumption Kinetic of Five Different Lactobacilli in a Submerged Batch Whey Culture for Lactic Acid Production [Volume 28, Issue 7, 2015, Pages 970-977]
-
Rezvani, M.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Rezvani, Mohammad
Hierarchical Control Strategy of CPL-based DC MGs using a New DAPI Secondary Controller [(Articles in Press)]
-
Rezvani, Mohammad
A DFT Based Secondary Average Controller for Voltage/Frequency Regulation and Active/Reactive Power Sharing of AC Microgrids [(Articles in Press)]
-
Rezvani, Mohsen
DABT-U-Net: Dual Attentive BConvLSTM U-Net with Transformers and Collaborative Patch-based Approach for Accurate Retinal Vessel Segmentation [(Articles in Press)]
-
Rezzoug, A.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Riabokon, E. P.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Riabokon, E. P.
Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
-
Riadi, I.
Mitigation from SQL Injection Attacks on Web Server using Open Web Application Security Project Framework [Volume 37, Issue 4, 2024, Pages 635-645]
-
Riahifar, Reza
AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
-
Riazi, L.
A Novel Ensemble Deep Learning Model for Building Energy Consumption Forecast [Volume 37, Issue 6, 2024, Pages 1067-1075]
-
Riazi, S.
Hydrolysis of Sorghum (Broomcorn) in Diluted Hydrochloric Acid [Volume 28, Issue 11, 2015, Pages 1543-1551]
-
Riazi, Sima
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation [Volume 33, Issue 1, 2020, Pages 148-157]
-
Ridha, S.
Optimum Drill Bit Selection by Using Bit Images and Mathematical Investigation [Volume 30, Issue 11, 2017, Pages 1807-1813]
-
Ridhova, A.
Characteristics of PANi/rGO Nanocomposite as Protective Coating and Catalyst in Dye-sensitized Solar Cell Counter Electrode Deposited on AISI 1086 Steel Substrate [Volume 31, Issue 10, 2018, Pages 1741-1748]
-
Ridzuan, M. J. M.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Ridzuan, N
Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique [Volume 31, Issue 8, 2018, Pages 1302-1307]
-
Rifai, S.
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Righetti, Maurizio
On Coherent Structures of Turbulent Open-channel Flow Above a Rough Bed [Volume 29, Issue 11, 2016, Pages 1520-1529]
-
Riskiyah, I. R.
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Rivera, C. T.
A Real-time Motion Tracking Wireless System for Upper Limb Exosuit Based on Inertial Measurement Units and Flex Sensors (TECHNICAL NOTE) [Volume 32, Issue 6, 2019, Pages 820-827]
-
Rivera, O
Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources [Volume 31, Issue 8, 2018, Pages 1215-1221]
-
Riyazi, M.
Behavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets [Volume 20, Issue 1, 2007, Pages 49-58]
-
Riza, M.
Numerical Simulation of Embankment Settlement in Vacuum Preloading Systems [Volume 36, Issue 4, 2023, Pages 817-823]
-
Rizal, A.
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Rizi, M. H.
Investigation of the Heat Treatment Effect on Microstructures and Phases of Inconel 713C Superalloy [Volume 30, Issue 10, 2017, Pages 1538-1544]
-
Rizky, I
Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 622-628]
-
Riztian Nugraha, A.
Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
-
Rizvi, S. A.
Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions [Volume 30, Issue 4, 2017, Pages 597-603]
-
Rizvi, S. A.
Effect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints [Volume 30, Issue 10, 2017, Pages 1592-1598]
-
Rizvi, S. A.
Effect of Heat Input on Microstructural and Mechanical Properties of AISI 304 Welded Joint Via MIG Welding [Volume 33, Issue 9, 2020, Pages 1811-1816]
-
Rochardjo, H. S.B.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Rochardjo, H. S. B.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Rochman, T.
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Rochman, Yuli Agusti
Development of Lean Implementation Framework for Indonesian Batik Small and Medium-Sized Enterprises [(Articles in Press)]
-
Rodrigues, M. A.
Adaptive Polynomial Coding of Multi-base Hybrid Compression [Volume 36, Issue 2, 2023, Pages 236-252]
-
Rohani, M.
Deep Multi-task Convolutional Neural Networks for Efficient Classification of Face Attributes [Volume 36, Issue 11, 2023, Pages 2102-2111]
-
Rohbani, H.
Compressive Mechanical Properties and Water Absorption of Glass fiber-reinforced Plastics Pipes Aged in Caspian SeaWater [Volume 37, Issue 6, 2024, Pages 1146-1153]
-
Rohith Sai, K.
Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
-
Rohmawati, Lydia
Synthesis of Fe3O4/SiO2/PEG Nanocomposite from Minerals Sands: Kinetic Adsorption Heavy Metal Ion from Aqueous Solution [(Articles in Press)]
-
Rokni, Houman B.
Nanofluid Flow in a Semi-porous Channel in the Presence of Uniform Magnetic Field [Volume 26, Issue 6, 2013, Pages 653-662]
-
Ronsin, J.
Visual Pattern Image Coding by a Morphological Approach (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 371-378]
-
Roohbakhsh Davaran, A.
A 3d Micro-Plane Model for Shape Memory Alloys [Volume 21, Issue 1, 2008, Pages 17-30]
-
Roohi Ghadikolaei, H
A Computational Study about the Effect of Turbines Pitched Blade Attack Angle on the Power Consumption of a Stirred Tank [Volume 31, Issue 1, 2018, Pages 65-70]
-
Roostaei, A.
Considering Production Planning in the Multi-period Inventory Routing Problem with Transshipment between Retailers [Volume 31, Issue 9, 2018, Pages 1568-1574]
-
Roshan, N.
Population Balance Equation Modeling of Crude Oil Demulsification Considering Demulsifier: Modification of Collision Frequency Function Based on Thermodynamic Model [Volume 30, Issue 10, 2017, Pages 1434-1442]
-
Roshandel, R.
Numerical Simulation of Non-Uniform Gas Diffusion Layer Porosity Effect on Polymer Electrolyte Membrane Fuel Cell Performance [Volume 20, Issue 2, 2007, Pages 179-192]
-
Roshandel, Ramin
Numerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells [Volume 25, Issue 3, 2012, Pages 177-186]
-
Roshanfekr, Shadi
Multi-objective Optimization of a Projectile Tip for Normal Penetration [Volume 26, Issue 10, 2013, Pages 1225-1234]
-
Roshani, R.
Influence of Mixing Conditions of Modified Bitumen on Moisture Sensitivity of Asphalt Compounds [Volume 35, Issue 5, 2022, Pages 855-864]
-
Roshanian, J.
Optimal Sliding-Mode Guidance Law for Fixed-Interval Propulsive Maneuvers [Volume 21, Issue 2, 2008, Pages 105-112]
-
Roshanian, J.
Active Noise Cancellation using Online Wavelet Based Control System: Numerical and Experimental Study [Volume 30, Issue 1, 2017, Pages 120-126]
-
Roshanian, J.
A Generalization for Model Reference Adaptive Control and Robust Model Reference Adaptive Control Adaptive Laws for a Class of Nonlinear Uncertain Systems with Application to Control of Wing Rock Phenomenon [Volume 33, Issue 11, 2020, Pages 2372-2383]
-
Rostamani, Razie
A Dimensionless Parameter Approach based on Singular Value Decomposition and Evolutionary Algorithm for Prediction of Carbamazepine Particles Size [Volume 30, Issue 3, 2017, Pages 330-337]
-
Rostami, A. A.
Longitudinal Conduction in Cross Flow Heat Exchanger with Condensation [Volume 1, Issue 2, 1988, Pages 129-138]
-
Rostami, AA
Modified Enthalpy Method Applied to Laser Annealing of Semi Conductor Films [Volume 8, Issue 3, 1995, Pages 169-179]
-
Rostami, AA
Solubility of Hydrogen Sulfid and Sulfur Dioxide in Triethylen Glycol, Tetra Ethylene Clycol and Diethanol (TECHNICAL NOTE). AMINE SOLUTION [Volume 10, Issue 2, 1997, Pages 103-110]
-
Rostami, F
Wave Energy Dissipation Using Perforated and Non Perforated Piles [Volume 31, Issue 2, 2018, Pages 212-219]
-
Rostami, Hamid
Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE) [Volume 24, Issue 3, 2011, Pages 291-300]
-
Rostami, M.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Rostami, Mehdi
Using Experimental Design to Optimize the Photo-degradation of P-Nitro Toluene by Nano-TiO2 in Synthetic Wastewater [Volume 32, Issue 8, 2019, Pages 1074-1081]
-
Rostami, Mohammad
Can the History Force be Neglected for the Motion of Particles at High Subcritical Reynolds Number Range? [Volume 19, Issue 1, 2006, Pages 23-34]
-
Rostami, Mohammad
Development of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements [Volume 20, Issue 2, 2007, Pages 105-116]
-
Rostami, N.
Functionalized Graphene Oxide/Polyacrylonitrile Nanofibrous Composite: Pb2+ and Cd2+ Cations Adsorption [Volume 33, Issue 6, 2020, Pages 1048-1053]
-
Rostami, Pejman
Application of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission [Volume 27, Issue 9, 2014, Pages 1449-1456]
-
Rostami Ghadi, A.
Image Enhancement via Reducing Impairment Effects on Image Components [Volume 26, Issue 11, 2013, Pages 1267-1274]
-
Rostamy, Z.
Determination of Resonance Frequency of Dominant and Higher Order Modes in Thin and Thick Circular Microstrip Patch Antennas with Superstrate by MWM (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 359-366]
-
Rostamy-Malkhalifeh, Mohsen
The Effects of the Size of Decision -making Units on Allocating Fixed Costs in Supply Chains [(Articles in Press)]
-
Rosyidan, C.
Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
-
Rosyidan, Cahaya
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Rouhani, A.
A Lagrangian Decomposition Algorithm for Robust Green Transportation Location Problem [Volume 32, Issue 1, 2019, Pages 85-91]
-
Rouhi, Mona
Recycling and Reuse of Organo-sulfur Compounds from Barrels of Natural Gas Contaminated with Mercaptan Odorant [Volume 32, Issue 11, 2019, Pages 1527-1533]
-
Rouhiolyaee, Fahime
Utilizing Decision Making Methods and Optimization Techniques to Develop a Model for International Facility Location Problem under Uncertainty [Volume 29, Issue 1, 2016, Pages 68-77]
-
Rouholamini, Mehdi
Grid-price-dependent Energy Management of a Building Supplied by a Multisource System Integrated with Hydrogen [Volume 29, Issue 1, 2016, Pages 40-48]
-
Roushani, mahmoud
Characterization of Polypyrrole-hydroxyethylcellulose/TiO2 Nanocomposite: Thermal Properties and AFM Analysis [Volume 28, Issue 5, 2015, Pages 654-661]
-
Roustaei, M.
Prediction of Mechanical Properties of Frozen Soils Using Response Surface Method: An Optimization Approach [Volume 33, Issue 10, 2020, Pages 1826-1841]
-
Routara, B. C
Evaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite [Volume 31, Issue 7, 2018, Pages 1088-1094]
-
Rowhanimanesh, A.
An Optimal Boolean Approach for Computational Modeling of Gene Regulatory Networks from Temporal Gene Expression Profile [Volume 35, Issue 3, 2022, Pages 604-612]
-
Roy, B. K.
Comparative Performance Study of Tuned Liquid Column Ball Damper for Excessive Liquid Displacement on Response Reduction of Structure [Volume 33, Issue 5, 2020, Pages 753-759]
-
Roy, S.
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Royani, A.
Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
-
Rozak, A.
Case Study in Increasing Overall Equipment Effectiveness on Progressive Press Machine Using Plan-do-check-act Cycle [Volume 33, Issue 11, 2020, Pages 2245-2251]
-
Rozhkova, Y.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Rudko, V. A.
Integral Assessment of Influence Mechanism of Heavy Particle Generator on Hydrocarbon Composition of Vehicles Motor Fuel [Volume 37, Issue 8, 2024, Pages 1700-1706]
-
Ruhi, M.
Three Dimensional Analysis of Laminated Cylindrical Panels with Piezoelectric Layers [Volume 19, Issue 1, 2006, Pages 61-72]
-
Rupesh, M.
Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
-
Rusdi, Rusdi
Kinetics Studies Impact of Initial pH and Addition of Yeast Saccharomyces cerevisiae on Biogas Production from Tofu Wastewater in Indonesia [Volume 29, Issue 8, 2016, Pages 1037-1046]
-
Rusli, N. S. N.
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Rustendi, Iwan
Strengthening the Standardisation of Professional Engineering Competencies to Support Sustainable Construction Through Circular Economy Principles in Indonesia [(Articles in Press)]
-
Rybakov, Denis
Development of a hydraulic circulation sub as a tool to prevent mud losses during well drilling [(Articles in Press)]
-
Rylnikova, M. V.
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Rylnikova, M. V.
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Rzavi, F.
A New Approach for Determination of Break Points for Protection Co-Ordination [Volume 16, Issue 2, 2003, Pages 133-142]
S
-
S, KALIDASS
Cutting Force Prediction in End Milling Process of AISI 304 Steel Using Solid Carbide Tools [Volume 28, Issue 7, 2015, Pages 1074-1081]
-
S, rajapandian
Harmonic Reduction Technique Using Flying Capacitor Based Z Source Inverter for a DVR [Volume 26, Issue 3, 2013, Pages 309-314]
-
Saadat, M.
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Saadat, Mozafar
A New Intelligent Approach to Patient-cooperative Control of Rehabilitation Robots [Volume 27, Issue 3, 2014, Pages 467-474]
-
Saadat Foumani, M.
A New Framework for Advancement of Power Management Strategies in Hybrid Electric Vehicles [Volume 33, Issue 3, 2020, Pages 468-476]
-
Saadat Foumani, Mahmoud
Modelling and Optimization of Toroidal Continuously Variable Transmission in ECE Driving Cycle [Volume 26, Issue 12, 2013, Pages 1535-1542]
-
Saadat Foumani, Mahmoud
Application of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission [Volume 27, Issue 9, 2014, Pages 1449-1456]
-
Saadat Foumani, Mahmoud
Multi-objective Optimization of Hybrid Electric Vehicle Equipped with Power-split Continuously Variable Transmission [Volume 29, Issue 3, 2016, Pages 368-377]
-
Saadat Foumani, Mahmoud
Modification of Equivalent Consumption Minimization Strategy for a Hybrid Electric Vehicle [Volume 29, Issue 12, 2016, Pages 1757-1764]
-
Saadati, F.
Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
-
Saadati, M.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Saadatmand, M. R.
A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
-
Saadatmand, M. R.
An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
-
Saatchi, A.
Electrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel [Volume 4, Issue 1, 1991, Pages 53-64]
-
Saati, M.A.
A New Hybrid Brushless DC Motor/Generator without Permanent Magnet [Volume 20, Issue 1, 2007, Pages 77-86]
-
Sabaghi, Fatemeh
Fractal Bandpass Filter Using Y-shaped Dual-Mode Resonator for C-Band Receiver (Research Note) [Volume 29, Issue 1, 2016, Pages 49-52]
-
Sabahi, M.
Novel Unified Control Method of Induction and Permanent Magnet Synchronous Motors [Volume 32, Issue 2, 2019, Pages 256-269]
-
Sabahno, H.
The Effect of Measurement Errors on the Performance of Variable Sample Size and Sampling Interval Control Chart [Volume 30, Issue 7, 2017, Pages 995-1004]
-
Sabbagh Yazdi, S. R.
Pressure-Velocity Coupled Finite Volume Solution of Steady Incompressible Invscid Flow Using Artificial Compressibility Technique [Volume 17, Issue 2, 2004, Pages 109-118]
-
Sabbagh-Yazdi, S. R.
Numerical Investigation of Island Effects on Depth Averaged Fluctuating Flow in the Persian Gulf [Volume 20, Issue 2, 2007, Pages 117-128]
-
Sabbagh-Yazdi, S. R.
Coupling Nonlinear Element Free Galerkin and Linear Galerkin Finite Volume Solver for 2D Modeling of Local Plasticity in Structural Material [Volume 33, Issue 3, 2020, Pages 387-400]
-
Sabchevski, S.
Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
-
Saber, A.
Effects of Brace-viscous Damper System on the Dynamic Response of Steel Frames [Volume 33, Issue 5, 2020, Pages 720-731]
-
Saberi, Marzieh
Preventing Key Performance Indicators Violations Based on Proactive Runtime Adaptation in Service Oriented Environment [Volume 29, Issue 11, 2016, Pages 1539-1548]
-
Saberi, Miad
A Continuum Shell-beam Finite Element Modeling of Buried Pipes with 90-degree Elbow Subjected to Earthquake Excitations [Volume 28, Issue 3, 2015, Pages 338-349]
-
Sabet, Ali Reza
Ballistic Performance of Hybrid Armor with Ceramic Inserts and Polymeric Matrix for Different Threat Levels (TECHNICAL NOTE) [Volume 27, Issue 6, 2014, Pages 945-950]
-
Sabetghadam, Fereidoun
A Fast Immersed Boundary Fourier Pseudo-spectral Method for Simulation of the Incompressible Flows [Volume 27, Issue 9, 2014, Pages 1457-1466]
-
Sabihi, A.
Settlements and Consolidation Rates under Embankments in a Soft Soil with Vertical Drains [Volume 30, Issue 7, 2017, Pages 972-980]
-
Sabir, A. B.
Stiffness Matrices for Axial and Bending Deformations of Non-Prismatic Beams with Linearly Varying Thickness [Volume 1, Issue 1, 1988, Pages 19-28]
-
Saboohi, Y.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Saboohi, Z.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Saboonchi, A.
Thermal Contact Resistance of Wavy Surfaces (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 293-300]
-
Saboori, Behnam
A Continuum Model For Stone-wales Defected Carbon Nanotubes [Volume 28, Issue 3, 2015, Pages 433-439]
-
Sabouri, Mahdi
Exact Modeling and Simulation of Saturated Induction Motors with Broken Rotor Bars Fault using Winding Function Approach [Volume 27, Issue 1, 2014, Pages 69-78]
-
Sabouri, Mahdi
Magnetic Saturation Impacts on Fault Analysis of Squirrel-cage Six Phases Induction Motors using Winding Function Approach [Volume 27, Issue 9, 2014, Pages 1359-1366]
-
Sabour Rouhaghadam, A.R.
A Review on Titanium Nitride and Titanium Carbide Single and Multilayer Coatings Deposited by Plasma Assisted Chemical Vapor Deposition [Volume 29, Issue 5, 2016, Pages 677-687]
-
Sabree, I. K.
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Sabri, F. N.
Lattice Boltzmann Method Application on Headwater at Lata Kinjang Waterfall, Malaysia [Volume 33, Issue 5, 2020, Pages 760-769]
-
Sabukevich, Violetta Sergeevna
Justification of the development system and measures to increase the productivity of wells in the oil field of the eastern part of the Pechora sea [(Articles in Press)]
-
Sabzalian, B.
Iterative Weighted Non-smooth Non-negative Matrix Factorization for Face Recognition [Volume 31, Issue 10, 2018, Pages 1698-1707]
-
Sadafi, Mohamadhosein
Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
-
Sadafi, Nasibeh
Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 247-260]
-
SadatHosseini, S.H.
The Effect of Asymmetric Water Entry on the Hydrodynamic Impact [Volume 17, Issue 2, 2004, Pages 205-212]
-
Sadati, Azam
Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
-
Sadati, S. H.
Modified L1 Adaptive Control Design for Satellite FMC Systems with Actuators Time Delay [Volume 31, Issue 11, 2018, Pages 1982-1990]
-
Sadat Rezaee, M
Automotive Vendor's Performance Evaluation and Improvement Plan Presentation by Using a Data Envelopment Analysis [Volume 31, Issue 2, 2018, Pages 374-381]
-
Sadegheih, A.
Network Planning Using Iterative Improvement Methods and Heuristic Techniques [Volume 15, Issue 1, 2002, Pages 63-74]
-
Sadegheih, A.
A Novel Method for Designing and Optimization of Networks [Volume 20, Issue 1, 2007, Pages 17-26]
-
Sadegheih, A.
A Novel Experimental Analysis of the Minimum Cost Flow Problem [Volume 22, Issue 3, 2009, Pages 251-268]
-
Sadegheih, A.
Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]
-
Sadegheih, A.
A New Multi-objective Job Shop Scheduling with Setup Times Using a Hybrid Genetic Algorithm [Volume 26, Issue 2, 2013, Pages 207-218]
-
Sadegheih, A.
Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
-
Sadegheih, A.
Developing the Inventory Routing Problem with Backhauls, Heterogeneous Fleet and Split Service [Volume 31, Issue 6, 2018, Pages 949-958]
-
Sadegheih, A.
Modelling and Decision-making on Deteriorating Production Systems using Stochastic Dynamic Programming Approach [Volume 31, Issue 12, 2018, Pages 2052-2058]
-
Sadeghi, E.
Ultra Low Power Temperature Compensated Complementary Metal Oxide Semiconductor Ring Oscillator in Subthreshold [Volume 36, Issue 1, 2023, Pages 108-118]
-
Sadeghi, Hojatollah
Monitoring Financial Processes with ARMA-GARCH Model Based on Shewhart Control Chart (Case Study: Tehran Stock Exchange) [Volume 30, Issue 2, 2017, Pages 270-280]
-
Sadeghi, J
Online Monitoring for Industrial Processes Quality Control Using Time Varying Parameter Model [Volume 31, Issue 4, 2018, Pages 524-532]
-
Sadeghi, J.
Influences of Track Structure, Geometry and Traffic Parameters on Railway Deterioration [Volume 20, Issue 3, 2007, Pages 292-300]
-
Sadeghi, M. H.
An Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces [Volume 16, Issue 4, 2003, Pages 385-394]
-
Sadeghi, M. H.
Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology [Volume 32, Issue 2, 2019, Pages 328-337]
-
Sadeghi, Morteza
Aeolian Vibrations of Transmission Line Conductors with More than One Damper [Volume 28, Issue 10, 2015, Pages 1515-1524]
-
Sadeghian, M.
The Reliability Assessment of a Ship Structure under Corrosion and Fatigue, using Structural Health Monitoring [Volume 35, Issue 9, 2022, Pages 1765-1778]
-
Sadeghian, Mojtaba
Frequency Analysis for a Timoshenko Beam Located on an Elastic Foundation [Volume 24, Issue 1, 2011, Pages 87-105]
-
Sadeghian, Mostafa
Nonlinear Buckling of Circular Nano Plates on Elastic Foundation [Volume 29, Issue 5, 2016, Pages 697-705]
-
Sadeghian, M.S.
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Sadeghian, R.
A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
-
Sadeghian, T.
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Sadeghian Kerdabadi, M.
Joint Sensing Times Detection Thresholds and Users Association Optimization in Multi-Channel Multi-Antenna Cognitive Radio Networks [Volume 36, Issue 9, 2023, Pages 1704-1719]
-
Sadeghi Dastaki, Mohsen
Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm [Volume 28, Issue 11, 2015, Pages 1624-1633]
-
Sadeghieh, Ahmad
A Comprehensive Mathematical Model for a Location-routing-inventory Problem under Uncertain Demand: a Numerical Illustration in Cash-in-transit Sector [Volume 32, Issue 11, 2019, Pages 1634-1642]
-
Sadeghi Fazel, A. H.
Behavior of Eccentrically Inclined Loaded Ring Footings Resting on Granular Soil [Volume 33, Issue 11, 2020, Pages 2146-2154]
-
Sadeghijaleh, M.
Adaptive Voltage-based Control of Direct-drive Robots Driven by Permanent Magnet Synchronous Motors [Volume 30, Issue 4, 2017, Pages 507-515]
-
Sadeghijaleh, Mahdi
Voltage Control Strategy for Direct-drive Robots Driven by Permanent Magnet Synchronous Motors [Volume 28, Issue 5, 2015, Pages 709-716]
-
Sadeghipour, M. S.
Natural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls [Volume 15, Issue 3, 2002, Pages 293-302]
-
Sadeghirad, Alireza
A Collocation Method with Modified Equilibrium on Line Method for Imposition of Neumann and Robin Boundary Conditions in Acoustics (TECHNICAL NOTE) [Volume 23, Issue 1, 2010, Pages 11-22]
-
Sadeghi Rad, R
An Integrated Closed-loop Supply Chain Configuration Model and Supplier Selection based on Offered Discount Policies [Volume 31, Issue 3, 2018, Pages 440-449]
-
Sadeghiyan, B.
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Sadegh Moghadasi, S.
An Efficient Target Tracking Algorithm Based on Particle Filter and Genetic Algorithm [Volume 32, Issue 7, 2019, Pages 915-923]
-
Sadeghpour, M.
Development of Green Product Processes in Textile Industry Using Mathematical Modeling and NSGA-II Metaheuristic Algorithm: A Case Study in Oyaz Industrial Group [Volume 37, Issue 4, 2024, Pages 725-738]
-
SadeghpourHaji, M
A Wavelet Support Vector Machine Combination Model for Daily Suspended Sediment Forecasting [Volume 27, Issue 6, 2014, Pages 855-864]
-
Sadeghzadeh, Arash
Discrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 410-418]
-
Sadeghzadeh, S.
Immobilization of Laccase from Trametes hirsuta onto CMC Coated Magnetic Nanoparticles [Volume 33, Issue 4, 2020, Pages 513-519]
-
Sadegian, M.H.
Study of Pitting Corrosion Inhibition of Mild Steel by Nitrite in Concrete Pore Solution by Polarization and Zero Resistance Ammetery (ZRA) Techniques (RESEARCH NOTE) [Volume 22, Issue 4, 2009, Pages 369-380]
-
Sadeg Zadeh Ahari, J.
Determination of Suitable Concentrations of H2O and CO2 in the Feed of Syngas Production (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 21-28]
-
Sadighi, S.
Sealing of Rotary Drums for Operation Under Pressurized Conditions [Volume 19, Issue 1, 2006, Pages 1-12]
-
Sadiq, Obanishola
Dynamic Analysis of Circular Plates in Contact with Fluid and Resting on Two-Parameter Foundations [Volume 32, Issue 12, 2019, Pages 1798-1804]
-
Sadjadi, S. J.
A Robust Knapsack Based Constrained Portfolio Optimization [Volume 33, Issue 5, 2020, Pages 841-851]
-
Sadjadi, S.J.
A Trust Region Algorithm for Solving Nonlinear Equations (RESEARCH NOTE) [Volume 15, Issue 2, 2002, Pages 191-196]
-
Sadjadi, S.J.
An Algorithm to Compute the Complexity of a Static Production Planning (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 57-60]
-
Sadjadi, S.J.
Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
-
Sadjadi, S.J.
Two-tier Supplier Base Efficiency Evaluation Via Network DEA: A Game Theory Approach [Volume 29, Issue 7, 2016, Pages 931-939]
-
Sadjadi, S. M.
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
SadrAmeli, M.
Heat Transfer Calculation in the Firebox of the Ethylene Plant Furnaces (RESEARCH NOTE). [Volume 10, Issue 4, 1997, Pages 219-228]
-
SadrAmeli, M.
Advance Modelling and Simulation of Industrial Boilers [Volume 11, Issue 2, 1998, Pages 61-72]
-
Sadreddini, Z.
Autonomous Vehicle Convoy Formation Control with Size/Shape Switching for Automated Highways [Volume 33, Issue 11, 2020, Pages 2174-2180]
-
Sadri, J.
Design of Broaching Tool Using Finite Element Method for Achieving the Lowest Residual Tensile Stress in Machining of Ti6Al4V Alloy [Volume 33, Issue 4, 2020, Pages 657-667]
-
Sadri, J.
Experimental Study on Surface Integrity of Ti6Al4V by Broaching [Volume 35, Issue 2, 2022, Pages 481-492]
-
Sadri Esfahani, Ali
Modeling the Time Windows Vehicle Routing Problem in Cross-Docking Strategy Using Two Meta-Heuristic Algorithms [Volume 27, Issue 7, 2014, Pages 1113-1126]
-
Sadripour, G.
Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
-
Sadripour, S
Experimental and Numerical Investigation of Two Different Traditional Hand-Baking Flatbread Bakery Units in Kashan, Iran [Volume 31, Issue 8, 2018, Pages 1292-1301]
-
Sadr Karimi, Jamshid
Lime and Distilled Water Treatment of Dispersive Soils by Electroosmosis Effect (TECHNICAL NOTE) [Volume 11, Issue 4, 1998, Pages 229-234]
-
Sadr Karimi, Jamshid
Compressive Strength Freeze and Thow Durability Correlation in Soil Cement Design (RESEARCH NOTE) [Volume 13, Issue 4, 2000, Pages 65-72]
-
Sadr Karimi, Jamshid
Geotechnical Properties of Lacustrine Carbonate Sediment [Volume 15, Issue 4, 2002, Pages 347-356]
-
Sadr Karimi, Jamshid
Gypsum Dissolution Effects on the Performance of a Large Dam (TECHNICAL NOTE) [Volume 21, Issue 2, 2008, Pages 143-150]
-
Sadr Karimi, Jamshid
An Experimental Investigation into the Arching Effect in Fine Sand [Volume 21, Issue 4, 2008, Pages 345-360]
-
Sadrnejad, S. A.
Multilaminate Elastoplastic Model for Granular Media [Volume 5, Issue 1, 1992, Pages 11-24]
-
Sadrnejad, S. A.
Numerical Solution for Heave of Expansive Soils [Volume 12, Issue 1, 1999, Pages 13-20]
-
Sadrnejad, S. A.
Numerical Solution for Gate Induced Vibration Due to Under Flow Cavitation [Volume 14, Issue 3, 2001, Pages 183-194]
-
Sadrnejad, S. A.
Constitutive Model for Multi-laminate Induced Anisotropic Double Hardening Elastic-plasticity of Sand [Volume 15, Issue 2, 2002, Pages 115-124]
-
Sadrnejad, S. A.
Hydraulic Model Studies of Non-Symmetric Y Branches In Karun I (RESEARCH NOTE) [Volume 15, Issue 3, 2002, Pages 227-244]
-
Sadrnejad, S. A.
A Sub Loading Surface Multilaminate Model for Elastic-Plastic Porous Media [Volume 15, Issue 4, 2002, Pages 315-324]
-
Sadrnejad, S. A.
Hydrodynamics Induced Vibration to Trash Racks (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 357-368]
-
Sadrnejad, S. A.
A Multi Plane Model for Natural Anisotropy of Sand [Volume 16, Issue 4, 2003, Pages 311-327]
-
Sadrnejad, S. A.
Inelastic Continuum Modeling of Carbon Nanotube,s Behavior Using Finite Element Method [Volume 20, Issue 2, 2007, Pages 129-135]
-
Sadrnejad, S. A.
A 3d Micro-Plane Model for Shape Memory Alloys [Volume 21, Issue 1, 2008, Pages 17-30]
-
Sadrnejad, S. A.
Stress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 227-234]
-
Sadrnejad, S. A.
Substructure Model for Concrete Behavior Simulation under Cyclic Multiaxial Loading [Volume 21, Issue 4, 2008, Pages 329-346]
-
Sadrnezhaad, S. K.
Synthesis and Characterization of Anatase-coated Multiwall Carbon Nanotube for Improvement of Photocatalytic Activity [Volume 30, Issue 4, 2017, Pages 543-550]
-
Sadrnezhaad, S. K.
Fabrication of Spiral Stent with Superelastic/ Shape Memory Nitinol Alloy for Femoral Vessel [Volume 30, Issue 7, 2017, Pages 1048-1053]
-
Sadrnezhaad, S. K.
Fluoride Precipitation of Cu Over Fe in a Selected pH Window [Volume 32, Issue 3, 2019, Pages 424-429]
-
Sadrnezhaad, S. K.
NiO-Ni-Al2O3(γ) Nanocatalyst by Pulse Electrocodeposition Over Ni Open-cell Foam for Methane Reforming [Volume 36, Issue 10, 2023, Pages 1908-1918]
-
Sadrnezhaad, S. K.
Thermodynamic Simulation of an Efficient Flash Ironmaking Technology for Chadormalu Mining and Industrial Company [Volume 37, Issue 5, 2024, Pages 1012-1021]
-
Sadrnezhaad, S.K
Loading Drug on Nanostructured Ti6Al4V-HA for Implant Applications [Volume 31, Issue 8, 2018, Pages 1159-1165]
-
Sadrnezhaad, S.K.
Sulfur Species in Particulates Emitted from Reducing Coal Combustion and Pyrometallurgical Furnaces [Volume 1, Issue 1, 1988, Pages 73-78]
-
Sadrnezhaad, S.K.
Direct Reduced Iron an Advantageous Charge Material for Induction Furnaces [Volume 3, Issue 1, 1990, Pages 37-48]
-
Sadrnezhaad, S.K.
Effect or Inoculation on Microstructure and Properties of Low C-Mn and Low Alloy Steels [Volume 4, Issue 1, 1991, Pages 65-71]
-
Sadrnezhaad, S.K.
Thermodynamics and Kinetics of Vaporization of Pbs From Complex Cu-Fe Mattes [Volume 8, Issue 4, 1995, Pages 199-212]
-
Sadrnezhaad, S.K.
Software for Kinetic Process Simulation (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 61-72]
-
Sadrnezhaad, S.K.
Thermodynamics of Extraction of Zn2+ from Sulfuric Acid Media with a Mixture of Dehpa and Mehpa [Volume 17, Issue 2, 2004, Pages 191-200]
-
Sadrnezhaad, S.K.
Leaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue [Volume 20, Issue 2, 2007, Pages 133-140]
-
Sadrnezhaad, S.K.
Particles Size Distribution Effect on 3d Packing of Nanoparticles Into a Bounded Region [Volume 20, Issue 3, 2007, Pages 281-291]
-
Sadrnezhaad, S.K.
Two-Stage Chemical Deposition of Oxide Films [Volume 21, Issue 1, 2008, Pages 65-70]
-
Sadrnezhaad, S.K.
Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity [Volume 21, Issue 2, 2008, Pages 109-116]
-
Sadrnezhaad, S.K.
Formation of Lanthanum Hydroxide Nanostructures: Effect of NaOH and KOH Solvents [Volume 21, Issue 2, 2008, Pages 169-176]
-
Sadrnezhaad, S.K.
Electrochemical Deposition of Flower-Like Nickel Nanostructures on Well-Defined n-Si (111):H [Volume 21, Issue 2, 2008, Pages 177-182]
-
Sadrnezhaad, S.K.
Pulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein [Volume 22, Issue 2, 2009, Pages 161-168]
-
Sadrnezhaad, S.K.
Thermodynamic Evaluation of Adsorption of Zinc Complex and ZnO Nano-Layer Prepared by TSCD Method Based on Langmuir Adsorption Model [Volume 22, Issue 2, 2009, Pages 179-184]
-
Sadrnezhaad, S.K.
Extraction of Zn, Mn and Co from Zn-Mn-Co-Cd-Ni containing solution using D2EHPA, CYANEX® 272 and CYANEX® 302 [Volume 24, Issue 2, 2011, Pages 181-190]
-
Sadrnezhaad, S.K.
Characterization of Constrained Aged Niti Strips for Using In Artificial Muscle Actuators (Technical Note) [Volume 24, Issue 4, 2011, Pages 321-330]
-
Sadrnezhaad, S.K.
EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO- C REFRACTORY [Volume 24, Issue 4, 2011, Pages 357-366]
-
Sadrnezhaad, S.K.
Nitinol Spinal Vertebrae: A Favorable New Substitute [Volume 32, Issue 6, 2019, Pages 842-851]
-
Sadrnezhaad, S.K.
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Sadrnia, M. A.
Using Sliding Mode Controller and Eligibility Traces for Controlling the Blood Glucose in Diabetic Patients at the Presence of Fault [Volume 33, Issue 2, 2020, Pages 257-268]
-
Saebnoori, ehsan
Surface Activation of NiTi Alloy by Using Electrochemical Process for Biomimetic Deposition of Hydroxyapatite Coating (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1627-1634]
-
Saeed, R.
Seismic Assessment of Concrete Dams, Considering Anisotropy Caused by Lift Joints [Volume 37, Issue 4, 2024, Pages 753-762]
-
Saeedi, Mohammad Amin
Liquid Sloshing Effect Analysis on Lateral Dynamics of an Articulated Vehicle Carrying Liquid for Various Filled Volumes [Volume 28, Issue 11, 2015, Pages 1671-1679]
-
Saeedi, Mohammad Amin
Analysis of Roll Control System to Eliminate Liquid Sloshing Effect on Lateral Stability of an Articulated Vehicle Carrying Liquid [Volume 29, Issue 3, 2016, Pages 386-393]
-
Saeedi, Mohsen
Desorption Kinetics of Heavy Metals (Lead, Zinc, and Nickel) Coexisted with Phenanthrene from a Natural High Buffering Soil [Volume 32, Issue 12, 2019, Pages 1716-1725]
-
Saeedi, Nafiseh
Size-dependent Vibration and Instability of Magneto-electro-elastic Nano-scale Pipes Containing an Internal Flow with Slip Boundary Condition [Volume 29, Issue 7, 2016, Pages 995-1004]
-
Saeedmonir, H
Experimental Study on Using Uniform Tuned Liquid Column Damper for Structural Control of Buildings Resting on Loose Soil [Volume 31, Issue 7, 2018, Pages 1028-1037]
-
Saeedmonir, H.
Numerical and Experimental Study of Soil-structure Interaction in Structures Resting on Loose Soil Using Laminar Shear Box [Volume 30, Issue 11, 2017, Pages 1654-1663]
-
Saeedmonir, H.
Experimental and Numerical Study on a New Double-walled Tuned Liquid Damper [Volume 35, Issue 1, 2022, Pages 29-44]
-
Saeheaw, T.
Regression Modeling and Process Analysis of Plug and Spot Welds Used in Automotive Body Panel Assembly [Volume 33, Issue 11, 2020, Pages 2384-2398]
-
Saeidi, Navid
Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1511-1518]
-
Saeidi, Navid
A Procedure for Preparation of Semi-activated Carbon Fiber without any Treatment under High Temperature [Volume 27, Issue 10, 2014, Pages 1519-1526]
-
Saeidian, P.
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Saeidi-Mobarakeh, Z.
A Bi-level Meta-heuristic Approach for a Hazardous Waste Management Problem [Volume 33, Issue 7, 2020, Pages 1304-1310]
-
Saeri, M.R.
Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
-
Saeri, M.R.
A Study of Zeta Potential of Plasma Sprayed Hydroxyapatite Coating in Four Simulated Physiological Solutions [Volume 16, Issue 4, 2003, Pages 343-354]
-
Safabakhsh, R.
The Time Adaptive Self Organizing Map for Distribution Estimation [Volume 15, Issue 1, 2002, Pages 23-34]
-
Safaei, Abdulsattar
Buying Group Design Considering the Member’s Interest [Volume 30, Issue 9, 2017, Pages 1334-1341]
-
Safaei, Abdul Sattar
Buying Group Design Considering the Member’s Interest [Volume 30, Issue 9, 2017, Pages 1334-1341]
-
Safaei, Abdul Sattar
Robust Design of Dynamic Cell Formation Problem Considering the Workers Interest [Volume 32, Issue 12, 2019, Pages 1790-1797]
-
Safaei, N.
An Efficient Algorithm to Allocate Parts to Cells Minimizing Total Tardiness and Idle Times [Volume 17, Issue 4, 2004, Pages 381-388]
-
Safaei Ghadikolaei, A. H.
A Hybrid Fuzzy Multi-criteria Decision Making Model Based on Fuzzy DEMATEL with Fuzzy Analytical Network Process and Interpretative Structural Model for Prioritizing LARG Supply Chain Practices [Volume 32, Issue 3, 2019, Pages 413-423]
-
Safaei Mehrabani, Yavar
Symmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1447-1454]
-
Safaie, N.
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Safaie, N.
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Safaie, N.
A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
-
Safaie, N.
An Analytical Model for Confronting the Omicron Variant During COVID-19 Pandemic: A System Dynamic Approach [Volume 35, Issue 8, 2022, Pages 1533-1546]
-
Safaie, N.
A Framework for Analysis of Predictors of Mobile-marketing Use by Expanding Unified Theory of Acceptance and Use of Technology and Artificial Neural Networks [Volume 36, Issue 5, 2023, Pages 1012-1022]
-
Safak Tunalioglu, M.
Effect of Coating Materials on Wear in Internal Gears [Volume 30, Issue 11, 2017, Pages 1792-1799]
-
Safapour, P.
Two and Three-Dimensional Seepage Analysis of Earth Dams Considering Horizontal Filter Blanket Effects (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 187-195]
-
Safar, M.
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Safari, A.
A Novel Type-2 Adaptive Neuro Fuzzy Inference System Classifier for Modelling Uncertainty in Prediction of Air Pollution Disaster (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1746-1751]
-
Safari, Leila
Fully Differential Current Buffers Based on a Novel Common Mode Separation Technique [Volume 24, Issue 3, 2011, Pages 237-249]
-
Safari, M
Ovality and Bow Defect of Pre-punched Sheets in Roll Forming of Trapezoidal Sections [Volume 31, Issue 7, 2018, Pages 1123-1128]
-
Safari, M.
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Safari, M.
Investigation of Laser Cutting of Thin Polymethyl Methacrylate Sheets by Response Surface Methodology [Volume 37, Issue 3, 2024, Pages 484-495]
-
Safari, Mehdi
A Comprehensive Study of the Hydroforming Process of Metallic Bellows: Investigation and Multi-objective Optimization of the Process Parameters [Volume 32, Issue 11, 2019, Pages 1681-1688]
-
Safarian, S
Study of Stone-wales Defect on Elastic Properties of Single-layer Graphene Sheets by an Atomistic based Finite Element Model [Volume 31, Issue 3, 2018, Pages 456-463]
-
Safarihamid, K.
Chaotic Time Series Recognition: A Deep Learning Model Inspired by Complex Systems Characteristics [Volume 36, Issue 1, 2023, Pages 1-9]
-
Safartoobi, Masoumeh
Stabilization and Walking Control for a Simple Passive Walker Using Computed Torque Method (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1777-1786]
-
Safarzadeh, H.
Single Machine Scheduling Problem with Batch Outsourcing [Volume 35, Issue 5, 2022, Pages 1006-1016]
-
Safarzadeh, Hamed
Optimal Design of Magnetorheological Fluid Damper Based on Response Surface Method [Volume 28, Issue 9, 2015, Pages 1359-1367]
-
Safarzadeh, N
The Analysis of Wheel Loader Diesel Engine Crankshaft Failure [Volume 31, Issue 3, 2018, Pages 473-479]
-
Safavi, Seyed Mohsen
Couple Stress Effect on Micro/Nanocantilever-based Capacitive Gas Sensor [Volume 29, Issue 6, 2016, Pages 852-861]
-
Safavi, S. M.
Instrumentation Readings versus Numerical Analysis of Taham Dam [Volume 32, Issue 1, 2019, Pages 28-35]
-
Safavi, S.M.
A Fuzzy Based Three Color Meter/Marker for Diffserv Networks (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 243-250]
-
Safavi-Naeini, Safieddin
An Efficient Technique for Substrate Coupling Parasitic Extraction with Application to RF/Microwave Spiral Inductors (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 265-271]
-
Safekordi, A. A.
Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
-
Safekordi, A. A.
Pool Boiling Heat Transfer in Water/Amines Solutions [Volume 21, Issue 2, 2008, Pages 113-131]
-
Saffar, Mohammad
A Context-aware Architecture for Mental Model Sharing through Semantic Movement in Intelligent Agents [Volume 25, Issue 3, 2012, Pages 233-248]
-
Saffari, H
Evaluation of Seismic Behavior of Steel Moment Resisting Frames Considering Nonlinear Soil-structure Interaction [Volume 31, Issue 7, 2018, Pages 1020-1027]
-
Saffari, H.
Seismic Behavior of Asymmetric Two-Story X-braced Frames [Volume 32, Issue 4, 2019, Pages 495-502]
-
Saffari, H.
Seismic Yield Displacement Profile in Steel Eccentrically Braced Frames [Volume 32, Issue 9, 2019, Pages 1248-1259]
-
Saffarzadeh, M.
an Optimum Resource Allocation Model for Airport Passenger Terminals (RESEARCH NOTE) [Volume 12, Issue 3, 1999, Pages 179-188]
-
Safikhani, H
Pareto Optimization of Two-element Wing Models with Morphing Flap Using Computational Fluid Dynamics, Grouped Method of Data handling Artificial Neural Networks and Genetic Algorithms [Volume 31, Issue 4, 2018, Pages 666-672]
-
Safikhani, H.
Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO) [Volume 26, Issue 9, 2013, Pages 1089-1102]
-
Safikhani, H.
Numerical Study of Flow Field in New Design Dynamic Cyclone Separators [Volume 33, Issue 2, 2020, Pages 357-365]
-
Safikhani, H.
Numerical Simulation of Frost Formation in Interrupted Micro Channel Heat Sinks Considering Microfluidic Effects in Slip Regime [Volume 33, Issue 12, 2020, Pages 2556-2562]
-
Safikhani, H.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Safikhani, H.
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Safikhani, H.
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Safikhani, Hamed
Multi-Objective Optimization of Solar Thermal Energy Storage Using Hybrid of Particle Swarm Optimization and Multiple Crossover and Mutation Operator [Volume 24, Issue 4, 2011, Pages 367-376]
-
Safi Samghabadi, A.
Integrated Linear Integer Model of a Fleet Allocation and Aircraft Routing Problem with Operational Constraints [Volume 36, Issue 4, 2023, Pages 669-681]
-
Safiullin, R. N.
Integral Assessment of Influence Mechanism of Heavy Particle Generator on Hydrocarbon Composition of Vehicles Motor Fuel [Volume 37, Issue 8, 2024, Pages 1700-1706]
-
Safiullin, R. N.
Integral Evaluation of Implementation Efficiency of Automated Hardware Complex for Vehicle Traffic Control [Volume 37, Issue 8, 2024, Pages 1534-1546]
-
Safiullin, R. R.
Integral Assessment of Influence Mechanism of Heavy Particle Generator on Hydrocarbon Composition of Vehicles Motor Fuel [Volume 37, Issue 8, 2024, Pages 1700-1706]
-
Safiullin, R. R.
Integral Evaluation of Implementation Efficiency of Automated Hardware Complex for Vehicle Traffic Control [Volume 37, Issue 8, 2024, Pages 1534-1546]
-
Safiullina, E.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Safiullina, Elena
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Safiullina, E. U.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Sagar, B.
An Experimental and Analytical Study on Alccofine Based High Strength Concrete [Volume 33, Issue 4, 2020, Pages 530-538]
-
Sagar, G. V. R.
Implementation of Optimal Load Balancing Strategy for Hybrid Energy Management System in DC/AC Microgrid with PV and Battery Storage [Volume 32, Issue 10, 2019, Pages 1437-1445]
-
Saghaei, A.
A Statistical Method for Sequential Images–based Process Monitoring [Volume 33, Issue 7, 2020, Pages 1285-1292]
-
Saghafi, A.
Control of Electric Wheelchair Suspension System based on Biodynamic Response of Seated Human Body [Volume 33, Issue 8, 2020, Pages 1629-1636]
-
Saghafi, Sahar
Electrical Energy Management in Industrial Wastewater Treatment Plant [Volume 32, Issue 9, 2019, Pages 1269-1276]
-
Saghatoleslami, N.
Modeling of Texture and Color Froth Characteristics for Evaluation of Flotation Performance in Sarcheshmeh Copper Pilot Plant, Using Image Analysis and Neural Networks [Volume 17, Issue 2, 2004, Pages 121-130]
-
Saghehei, E.
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Sagvand, F.
A Novel 19-Level Boost Type Switched-capacitor Inverter with Two DC Sources and Reduced Semiconductor Devices [Volume 36, Issue 2, 2023, Pages 253-263]
-
Saha, D.
Experimental Investigation on Hard Rock Strata for the purpose of Ground Water Improvement with the inclusion of Bore Blasting Technique [Volume 37, Issue 9, 2024, Pages 1707-1715]
-
Saha, Ganesh
PULSATILE MOTION OF BLOOD IN A CIRCULAR TUBE OF VARYING CROSS-SECTION WITH SLIP FLOW [Volume 25, Issue 1, 2012, Pages 9-18]
-
Saha, Goutam
Natural Convection Heat Transfer within Octagonal Enclosure [Volume 23, Issue 1, 2010, Pages 1-10]
-
Saha, P.
Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
-
Saha, Sumon
Natural Convection Heat Transfer within Octagonal Enclosure [Volume 23, Issue 1, 2010, Pages 1-10]
-
Saham, S.
Power and Ventilation Performance Study in a Modified Vertical Axis Wind Turbine Based on Semi-analytical Approach [Volume 36, Issue 7, 2023, Pages 1331-1342]
-
Sahari, Japar
Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types [Volume 29, Issue 9, 2016, Pages 1257-1262]
-
Sahaya Anselin Nisha, A.
Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
-
Sahebi, M. R.
Automatic Phase Advancing in Switched Reluctance Motor by Employing an Electronic Governor for a Desired Speed Angle Profile [Volume 17, Issue 1, 2004, Pages 11-18]
-
Sahebi Hamrah, Z.
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Sahebjam, M.
Novel Unified Control Method of Induction and Permanent Magnet Synchronous Motors [Volume 32, Issue 2, 2019, Pages 256-269]
-
Sahebjamee, Nadia
Modeling Transport Phenomena in Selective Catalytic Reductant Catalytic Converter with NH3 as Reductant for NO Degradation [Volume 29, Issue 9, 2016, Pages 1183-1190]
-
Sahebjamnia, N.
New Approaches in Metaheuristics to Solve the Truck Scheduling Problem in a Cross-docking Center [Volume 31, Issue 8, 2018, Pages 1258-1266]
-
Sahebjamnia, Navid
Designing a Reliable Distribution Network with Facility Fortification and Transshipment under Partial and Complete Disruptions [Volume 29, Issue 9, 2016, Pages 1273-1281]
-
Sahel Hanane, K.
Fuzzy Logic Control of Maximum Power Point Tracking Controller in an Autonomous Hybrid Power Generation System by Extended Kalman Filter for Battery State of Charge Estimation [Volume 36, Issue 2, 2023, Pages 199-214]
-
Sahith Reddy, S.
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Sahli, A.
Flow Seals Parameters Analysis For Rotors [Volume 32, Issue 1, 2019, Pages 177-183]
-
Sahli, S.
Flow Seals Parameters Analysis For Rotors [Volume 32, Issue 1, 2019, Pages 177-183]
-
Sahoo, G.
A Random Forest Classifier based on Genetic Algorithm for Cardiovascular Diseases Diagnosis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1723-1729]
-
Sahraei, Z.
Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
-
Sahraeian, R.
A new Bi-objective model for a Two-echelon Capacitated Vehicle Routing Problem for Perishable Products with the Environmental Factor [Volume 30, Issue 4, 2017, Pages 523-531]
-
Sahraeian, R.
A Novel Sustainable Closed-loop Supply Chain Network Design by Considering Routing and Quality of Products [Volume 31, Issue 11, 2018, Pages 1918-1928]
-
Sahraeian, R.
A Lagrangian Decomposition Algorithm for Robust Green Transportation Location Problem [Volume 32, Issue 1, 2019, Pages 85-91]
-
Sahraeian, R.
A New Approach Generating Robust and Stable Schedules in m-Machine Flow Shop Scheduling Problems: A Case Study [Volume 33, Issue 2, 2020, Pages 293-303]
-
Sahraeian, R.
A Stochastic Model for Prioritized Outpatient Scheduling in a Radiology Center [Volume 33, Issue 4, 2020, Pages 598-606]
-
Sahraeian, R.
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Sahraeian, R.
A Bi-objective Cold Supply Chain for Perishable Products Considering Quality Aspects: A Case Study in Iran Dairy Sector [Volume 35, Issue 2, 2022, Pages 458-470]
-
Sahraeian, R.
A State-of-the-art Model of Location, Inventory, and Pricing Problem in the Closed-loop Supply Chain Network [Volume 35, Issue 8, 2022, Pages 1558-1570]
-
Sahraeian, Rashed
Capacitated Multimodal Structure of a Green Supply Chain Network Considering Multiple Objectives [Volume 26, Issue 9, 2013, Pages 963-974]
-
Sahraeian, Rashed
Multi-objective Differential Evolution for the Flow shop Scheduling Problem with a Modified Learning Effect [Volume 27, Issue 9, 2014, Pages 1395-1404]
-
Sahraeian, Rashed
Trucks Scheduling in a Multi-product Cross Docking System with Multiple Temporary Storages and Multiple Dock Doors [Volume 29, Issue 11, 2016, Pages 1595-1603]
-
Sahragard, E.
Semantic Segmentation of Aerial Imagery: A Novel Approach Leveraging Hierarchical Multi-scale Features and Channel-based Attention for Drone Applications [Volume 37, Issue 5, 2024, Pages 1022-1035]
-
Sahu, Saujanya Kumar
Estimation of Local Scour Depth Around Bridge Pier [(Articles in Press)]
-
Saiah, H.
Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
-
Saidi, Ali
Exact Analytical Solution for Bending Analysis of Functionally Graded Annular Sector Plates [Volume 22, Issue 3, 2009, Pages 307-316]
-
Saidi, Ali
Exact Elasticity Solutions for Thick-Walled FG Spherical Pressure Vessels with Linearly and Exponentially Varying Properties [Volume 22, Issue 4, 2009, Pages 405-416]
-
Saidi, Ali
Postbuckling Equilibrium Path of a Long Thin-Walled Cylindrical Shell (Single-Walled Carbon Nanotube) under Axial Compression Using Energy Method [Volume 24, Issue 1, 2011, Pages 79-86]
-
Saidi, Ali
BUCKLING ANALYSIS OF FUNCTIONALLY GRADED MINDLIN PLATES SUBJECTED TO LINEARLY VARYING IN-PLANE LOADING USING POWER SERIES METHOD OF FROBENIUS [Volume 25, Issue 1, 2012, Pages 89-106]
-
Saidi, Ali
On Symmetric and Asymmetric Buckling Modes of Functionally Graded Annular Plates under Mechanical and Thermal Loads [Volume 26, Issue 4, 2013, Pages 433-446]
-
Saidi, Alireza
Buckling Analysis of Thin Functionally Graded Rectangular Plates with two Opposite Edges Simply Supported [Volume 23, Issue 2, 2010, Pages 179-192]
-
Saidi, M. H.
A New Approach in Developing Optimal Defrost/Demist Performance in a Passenger Car (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1081-1089]
-
Saidi, M.H.
Availability Analysis For Heterogeneous Nucleation In A Uniform Electric Field [Volume 16, Issue 2, 2003, Pages 205-216]
-
Saidi, M.H.
Second Law Based Analysis of Fluid Flow in the Regenerator of Pulse Tube Refrigerators [Volume 21, Issue 2, 2008, Pages 181-194]
-
Saidi, M.H.
Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition [Volume 22, Issue 3, 2009, Pages 295-305]
-
Saidi Mehrabad, Mohammad
Turbine Blade Investment Casting Cost Estimating Model (TECHNICAL NOTES) [Volume 9, Issue 2, 1996, Pages 53-59]
-
Saidi Mehrabad, Mohammad
Economic Analysis of Implementing Respirator Program or Ventilation System in a Manufacturing Environment [Volume 13, Issue 3, 2000, Pages 21-32]
-
Saidi Mehrabad, Mohammad
Application of Markov Processes to the Machine Delays Analysis [Volume 15, Issue 1, 2002, Pages 63-72]
-
Saidi-Mehrabad, M.
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Saifudin, M.
Combustion Behavior of Fuel Briquettes Made from Ulin Wood and Gelam Wood Residues [Volume 33, Issue 11, 2020, Pages 2365-2371]
-
Sai Giridhar Reddy, V.
Eco-friendly Blocks by Blended Materials [Volume 30, Issue 5, 2017, Pages 636-642]
-
Saindane, U. V.
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Saindane, U. V.
Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
-
Saini, D. K. J.
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Sai Viswanathan, M.
Modelling of Eyeball with Pan/Tilt Mechanism and Intelligent Face Recognition Using Local Binary Pattern Operator [Volume 30, Issue 7, 2017, Pages 1098-1104]
-
Sajadi, S. M.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Sajadi, Zahra
Web Service Choreography Verification Using Z Formal Specification [Volume 29, Issue 11, 2016, Pages 1549-1557]
-
Sajadi Dehkordi, Sahar
Encapsulation of Food Components and Bioactive Ingredients and Targeted Release [Volume 33, Issue 1, 2020, Pages 1-11]
-
Sajedi, S.
Designing a Sustainable Reverse Logistics Network Considering the Conditional Value at Risk and Uncertainty of Demand under Different Quality and Market Scenarios [Volume 33, Issue 11, 2020, Pages 2252-2271]
-
Sakhaii, Mandana
A Robust Model for a Dynamic Cellular Manufacturing System with Production Planning [Volume 27, Issue 4, 2014, Pages 587-598]
-
Sakharov, A. N.
Prediction a of Tribocorrosion Wear Rate (RESEARCH NOTE) [Volume 11, Issue 2, 1998, Pages 109-114]
-
Sakthivel, V. P.
Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
-
Sakvand, M.
Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
-
Salahi, E.
Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages [Volume 22, Issue 2, 2009, Pages 169-178]
-
Salahi, E.
Effect of Combination on Properties of Cu-Ag Nanocomposites Synthesized by Heat Treatment [Volume 23, Issue 3, 2010, Pages 209-214]
-
Salahshoor, A.
Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE) [Volume 30, Issue 12, 2017, Pages 1856-1862]
-
Salahshoor, Masoomeh
Investigation of the Effects of Pressure Path and Tool Parameters in Hydrodynamic Deep Drawing [Volume 27, Issue 7, 2014, Pages 1155-1166]
-
Salajegheh, A.
A Hybrid Approach to Detect Researchers’ Communities Based on Deep Learning and Game Theory [Volume 36, Issue 11, 2023, Pages 2052-2062]
-
Salajegheh, Afshin
Preventing Key Performance Indicators Violations Based on Proactive Runtime Adaptation in Service Oriented Environment [Volume 29, Issue 11, 2016, Pages 1539-1548]
-
Salajegheh, Eysa
A Two Level Approximation Technique for Structural Optimization [Volume 7, Issue 2, 1994, Pages 85-94]
-
Salajegheh, Eysa
Efficient Optimum Design of Steructures With Reqency Response Consteraint Using High Quality Approximation [Volume 10, Issue 2, 1997, Pages 61-70]
-
Salajegheh, Eysa
Continuous Discrete Variable Optimization of Structures Using Approximation Methods [Volume 17, Issue 3, 2004, Pages 227-242]
-
Salajegheh, Eysa
Approximate Dynamic Analysis of Structures for Earthquake Loading Using FWT [Volume 20, Issue 1, 2007, Pages 37-47]
-
Salajegheh, J.
Continuous Discrete Variable Optimization of Structures Using Approximation Methods [Volume 17, Issue 3, 2004, Pages 227-242]
-
Salam, N.
Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
-
Salam, Zainal
A Fast and Efficient On-Line Harmonics Elimination Pulse Width Modulation for Voltage Source Inverter Using Polynomials Curve Fittings [Volume 23, Issue 1, 2010, Pages 53-68]
-
Salamat-Ahanghari, R.
Non-destructive Corrosion Monitoring of Reinforced Concrete Steel Rebars in Chloride Media by Smartphone Magnetic and Analog Hall-Effect Sensors [Volume 36, Issue 9, 2023, Pages 1626-1635]
-
Salamatbakhsh-Varjovi, A.
A Green Competitive Vehicle Routing Problem under Uncertainty Solved by an Improved Differential Evolution Algorithm [Volume 32, Issue 7, 2019, Pages 976-981]
-
Salamati, H.
Quenching Effect on the Pb-Substituted Bi-Based Bulk Ceramic Superconductors [Volume 11, Issue 1, 1998, Pages 21-28]
-
Salari, Zohreh
Dynamic Performance Analysis and Simulation of a Full Scale Activated Sludge System Treating an Industrial Wastewater Using Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 465-472]
-
Salarian, H.
Numerical Investigation of Hazardous Gas Dispersion Over Obstacles and Residential Areas [Volume 33, Issue 10, 2020, Pages 2087-2094]
-
Salarieh, H.
Effect of Flexural and Membrane Stiffness on the Analysis of Floating Roofs [Volume 23, Issue 1, 2010, Pages 57-64]
-
Salarieh, H.
Tracking and Shape Control of a Micro-cantilever using Electrostatic Actuation [Volume 27, Issue 9, 2014, Pages 1439-1448]
-
Salarpour, A
An Empirical Comparison of Distance Measures for Multivariate Time Series Clustering [Volume 31, Issue 2, 2018, Pages 250-262]
-
Salarvand, A.
Probability Approach for Prediction of Pitting Corrosion Fatigue Life of Custom 450 Steel [Volume 31, Issue 10, 2018, Pages 1773-1781]
-
Salarvand, Akbar
Comparison of Properties of Ti/TiN/TiCN/TiAlN Film Deposited by Cathodic Arc Physical Vapor and Plasma-assisted Chemical Vapor Deposition on Custom 450 Steel Substrates [Volume 29, Issue 10, 2016, Pages 1459-1468]
-
Salawu, Saheed
Dynamic Analysis of Circular Plates in Contact with Fluid and Resting on Two-Parameter Foundations [Volume 32, Issue 12, 2019, Pages 1798-1804]
-
Salazar, J. A.
Control of Formation of Intermetallic Compound in Dissimilar Joints Aluminum-steel [Volume 32, Issue 1, 2019, Pages 127-136]
-
Saleh, B. I.
Use of Quality Function Deployment for Gold Mining Feasibility Study (Case Study: Designing Explosive Storage Area) [Volume 33, Issue 5, 2020, Pages 825-832]
-
Saleh, B. I.
Identifying Tools and Methods for Risk Identification and Assessment in Construction Supply Chain [Volume 33, Issue 7, 2020, Pages 1311-1320]
-
Saleh, R
Optimum Ensemble Classification for Fully Polarimetric SAR Data Using Global-Local Classification Approach [Volume 31, Issue 2, 2018, Pages 331-338]
-
Saleh, Reza
Aixsymmetric Stagnation Point Flow of a Viscous Fluid on a Moving Cylinder with Time Dependent Axial Velocity [Volume 17, Issue 1, 2004, Pages 99-108]
-
Salehfard, S.
Numerical Study of Flow Field in New Design Dynamic Cyclone Separators [Volume 33, Issue 2, 2020, Pages 357-365]
-
Salehi, E.
Thermal Analysis of Shell-Side Flow of Shell-and-Tube Heat Exchanger Using Experimental and Theoretical Methods [Volume 13, Issue 1, 2000, Pages 15-26]
-
Salehi, Ehsan
Modeling Transport Phenomena in Selective Catalytic Reductant Catalytic Converter with NH3 as Reductant for NO Degradation [Volume 29, Issue 9, 2016, Pages 1183-1190]
-
Salehi, G. R.
The Energy and Exergy Analysis of Integrated Hydrogen Production System Using High Temperature Steam Electrolysis with Optimized Water Path (RESEARCH NOTE) [Volume 32, Issue 6, 2019, Pages 893-900]
-
Salehi, M.
Delamination Wear Mechanism in Gray Cast Irons [Volume 13, Issue 1, 2000, Pages 37-50]
-
Salehi, Mohammad Kazem
Effect of Different Turbine-generator Shaft Models on the Subsynchronous Resonance Phenomenon in the Double Cage Induction Generator Based Wind Farm [Volume 29, Issue 8, 2016, Pages 1103-1111]
-
Salehi, Samira
Investigation of Carbon Dioxide Adsorption on Amino-Functionalized Mesoporous Silica [Volume 28, Issue 6, 2015, Pages 848-854]
-
Salehi, Samira
Synthesis and Characterization of Amine-modified Mesoporous SBA-15 for Carbon Dioxide Sequestration at High Pressure and Room Temperature (RESEARCH NOTE) [Volume 29, Issue 10, 2016, Pages 1341-1346]
-
Salehi, S. J.
A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]
-
Salehi, S. J.
A New Generalized Step-up Multilevel Inverter Topology Based on Combined T-type and Cross Capacitor Modules [Volume 36, Issue 7, 2023, Pages 1354-1368]
-
Salehi, S. M
A Study on the Contact Ellipse and the Contact Pressure During the Wheel Wear through Passing the Tracks including Several Sharp Curves [Volume 31, Issue 5, 2018, Pages 826-833]
-
Salehi, S. M. M
Detecting Overlapping Communities in Social Networks using Deep Learning [Volume 33, Issue 3, 2020, Pages 366-376]
-
Salehi Doolabi, Davood
Microstructure and Corrosion Performance of Silica Coatings on Aluminum Surface Prepared by Plasma Electrolysis Technique [Volume 22, Issue 3, 2009, Pages 291-298]
-
Salehifar, H.
Prediction of Hardness of Copper-based Nanocomposites Fabricated by Ball-milling using Artificial Neural Network [Volume 36, Issue 10, 2023, Pages 1932-1941]
-
Salehinai, S.R.
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Salehi Nasab, S.
Optimal Sizing of Battery Energy Storage System in Commercial Buildings Utilizing Techno-economic Analysis [Volume 35, Issue 8, 2022, Pages 1662-1673]
-
Saleh Mirhasani, Soheila
Modeling and Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with an Oxygenated Fuel by Using an Exergoeconomic Methodology for Power, Heating and Cooling Production [Volume 33, Issue 3, 2020, Pages 477-485]
-
Saleh Pallu, M.
Experimental Study of Open Channel Model of Glass Fiber Reinforced Polymer and Its Flowing Characteristics [Volume 37, Issue 4, 2024, Pages 692-710]
-
Salehpoor, P.
Particles Size Distribution Effect on 3d Packing of Nanoparticles Into a Bounded Region [Volume 20, Issue 3, 2007, Pages 281-291]
-
Salehpoor, P.
Log-Normal and Mono-Sized Particles’ Packing into a Bounded Region [Volume 22, Issue 1, 2009, Pages 57-62]
-
Salehpoor, P.
Wall Effect in 3D Simulation Of Same Sized Particles Packing [Volume 25, Issue 2, 2012, Pages 137-142]
-
Salehpour, F.
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Salem, L. A.
Modification of the Properties of Warm Mix Asphalt Using Recycled Plastic Bottles [Volume 31, Issue 9, 2018, Pages 1514-1520]
-
Salemi, N.
Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
-
Saligheh, A.
Cutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys [Volume 33, Issue 6, 2020, Pages 1142-1148]
-
Salih, A.
An Adaptively-damped Compressible-liquid Model for Non-cavitating Hydraulic Surges [Volume 33, Issue 10, 2020, Pages 2047-2056]
-
Salih, Salih
Analysis of Temperature Effect on a Crystalline Silicon Photovoltaic Module Performance [Volume 29, Issue 5, 2016, Pages 722-727]
-
Salih, Y.
Dynamic Scene Change Detection in Video Coding [Volume 33, Issue 5, 2020, Pages 966-974]
-
Salihi, I. Umar
Equilibrium and Kinetic Studies on Lead (II) Adsorption by Sugarcane Bagasse Derived Activated Carbon (TECHNICAL NOTE) [Volume 30, Issue 11, 2017, Pages 1647-1653]
-
Salim, U. A.
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Salimi, Atefeh
A Hysteretic Two-phase Supply Modulator for Envelope Tracking RF Power Amplifiers [Volume 27, Issue 12, 2014, Pages 1832-1840]
-
Salimi, M. R.
The Use of Monte-Carlo Simulations in Seismic Hazard Analysis in Tehran and Surrounding Areas [Volume 25, Issue 2, 2012, Pages 159-166]
-
Salimi, M.
Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
-
Salimi, M.
Fabrication of Pebax/4A Zeolite Nanocomposite Membrane to Enhance CO2 Selectivity Compared to Pure O2, N2, and CH4 Gases [Volume 36, Issue 2, 2023, Pages 408-419]
-
Salimi, Meghdad
A New Compromise Decision-making Model based on TOPSIS and VIKOR for Solving Multi-objective Large-scale Programming Problems with a Block Angular Structure under Uncertainty [Volume 27, Issue 11, 2014, Pages 1673-1680]
-
Salimi, Reza
Mapping CRC Card into Stochastic Petri Net for Analyzing and Evaluating Quality Parameter of Security (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 689-698]
-
Salimi, Z.
Chemical Composition, Antibacterial and Analgesic Activity of Lavandula stoechas Flowers from North of Iran [Volume 32, Issue 8, 2019, Pages 1065-1073]
-
Salimi Kenari, H.
Fabrication of Nanoporous Functionalized Hydroxyapatite as High Performance Adsorbent for Acid Blue 25 Dye Removal [Volume 32, Issue 2, 2019, Pages 193-200]
-
SalimiKenari, H.
Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
-
Salimi-Namin, D.
A Theoretical and Practical Study of Cracking of an Aluminium Alloy During Side Pressing Using a Finite - Element Analysis [Volume 3, Issue 1, 1990, Pages 49-56]
-
Salleh, W. N. W.
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 Co-polyimide [Volume 31, Issue 8, 2018, Pages 1356-1363]
-
Salman, K. D.
Synthesis and Characterization Unsaturated Polyester Resin Nanocomposites Reinforced by Fe2O3+ Ni Nanoparticles: Influence on Mechanical and Magnetic Properties [Volume 35, Issue 1, 2022, Pages 21-28]
-
Salmanpour, S.
Acid Hydrolysis of Pretreated Palm Oil Lignocellulosic Wastes [Volume 20, Issue 2, 2007, Pages 147-156]
-
Salman Tabrizi, Noshin
Adsorption of Methylene Blue from Aqueous Solutions by Silk Cocoon [Volume 29, Issue 9, 2016, Pages 1191-1197]
-
Salmanzadeh, M
Eulerian Lagrangian Simulation of Particle Capture and Dendrite Formation on Binary Fibers [Volume 31, Issue 7, 2018, Pages 1004-1011]
-
Salmasnia, Ali
Fitting the Three-parameter Weibull Distribution by using Greedy Randomized Adaptive Search Procedure [Volume 30, Issue 3, 2017, Pages 424-431]
-
Salmi, A.
A New Model of Equivalent Modulus Derived from Repeated Load CBR Test [Volume 33, Issue 7, 2020, Pages 1321-1330]
-
Samadi, A.
Biodegradation of Polychlorinated Biphenyls by and Isolated from Contaminated Soil [Volume 32, Issue 5, 2019, Pages 628-633]
-
Samadi, Bahram
Dynamic Analysis of Suspension Footbridges Using an Actual Pedestrian Load Model Compared with EUR23984 EN Requirements [Volume 32, Issue 10, 2019, Pages 1379-1387]
-
Samadi, Farshad
Active Suspension System Control Using Adaptive Neuro Fuzzy (ANFIS) Controller [Volume 28, Issue 3, 2015, Pages 396-401]
-
Samadi, Somayeh
Production of Single Cell Protein from Sugarcane Bagasse by Saccharomyces cerevisiae in Tray Bioreactor [Volume 29, Issue 8, 2016, Pages 1029-1036]
-
Samadiani, N.
A Modfied Self-organizing Map Neural Network to Recognize Multi-font Printed Persian Numerals (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1700-1706]
-
Samadinai, N.
Diagnosis of Coronary Artery Disease via a Novel Fuzzy Expert System Optimized by Cuckoo Search [Volume 31, Issue 12, 2018, Pages 2028-2036]
-
Samami, M.
Optimal Design of a Brushless DC Motor, by Cuckoo Optimization Algorithm (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 668-677]
-
Samani, A.
Experimental Analysis and Physical Mechanism Investigation of Al2O3 Effect on New and Aged Transformer Oil Properties [Volume 36, Issue 3, 2023, Pages 548-557]
-
Samani, H. M. V.
Mathematical Model of Unsteady Groundwater Flow Through Aquifers and Calibration Via a Non-Linear Optimization Technique [Volume 11, Issue 1, 1998, Pages 1-14]
-
Samani, H. M. V.
Slope Stability Analysis Using A Non-linear Optimization Technique (RESEARCH NOTE) [Volume 16, Issue 2, 2003, Pages 147-156]
-
Samani, Hossein
Optimal Design and Benefit/Cost Analysis of Reservoir Dams by Genetic Algorithms Case Study: Sonateh Dam, Kordistan Province, Iran [Volume 29, Issue 4, 2016, Pages 482-489]
-
Samani, N.
A Parametric Cathment Erosion Model [Volume 2, Issue 3, 1989, Pages 118-127]
-
Samani, N.
Stochastic Synthesis of Drouths for Reservoir Storage Design (RESEARCH NOTE). [Volume 6, Issue 1, 1993, Pages 59-63]
-
Samani, N.
Optimum Design of Interbasin Pipe System (RESEARCH NOTES) [Volume 8, Issue 1, 1995, Pages 49-54]
-
Samareh salavati pour, Hadi
EXPERIMENTAL EVALUATION OF BLAST WAVE PARAMETERS IN UNDERWATER EXPLOSION OF HEXOGEN CHARGES [Volume 25, Issue 1, 2012, Pages 65-72]
-
Samareh salavati pour, Hadi
Prediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling [Volume 25, Issue 1, 2012, Pages 79-88]
-
Sami, S. M.
The Theoretical and Experimental Investigation of the Effect of Variation of Thermodynamical Parameters of Egr fluid on No Emissions in S I Engines [Volume 14, Issue 3, 2001, Pages 273-273]
-
Samimi, M. A.
An Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams [Volume 33, Issue 3, 2020, Pages 505-512]
-
Samimi, Y.
A Novel Excellence Model of the ICT Industry: Case Study on Telecommunications Backbone Network of Iran [Volume 33, Issue 10, 2020, Pages 2016-2029]
-
Samoei, Parvaneh
Simultaneous Multi-Skilled Worker Assignment and Mixed-Model Two-Sided Assembly Line Balancing [Volume 29, Issue 2, 2016, Pages 211-221]
-
Samoei, Parvaneh
Mixed-Model Assembly Line Balancing with Considering Reliability [Volume 30, Issue 3, 2017, Pages 411-423]
-
Samouei, P.
Design of a Knowledge Flow Network for the Personnel of an Organization under Various Scenarios and its Solution using Lagrangian Relaxation [Volume 35, Issue 6, 2022, Pages 1154-1169]
-
Samouei, P.
Bi-level Scenario-based Location-allocation-inventory Models for Post-crisis Conditions and Solving with Electromagnetic and Genetic Algorithms [Volume 35, Issue 10, 2022, Pages 1803-1819]
-
Samsami Khodadad, F.
A Novel Multi-user Detection Approach on Fluctuations of Autocorrelation Estimators in Non-Cooperative Communication [Volume 33, Issue 4, 2020, Pages 546-551]
-
Samsher, G.
Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature [Volume 30, Issue 7, 2017, Pages 1090-1097]
-
Samuel, S.
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Samuel, S.
Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
-
Samuel, S.
Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
-
Sanaei, Mehdi
Numerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel [Volume 26, Issue 7, 2013, Pages 771-780]
-
Sanati, Ali Mohammad
The Potential of Date-palm Leaf Ash as Low-cost Adsorbent for the Removal of Pb(II) Ion from Aqueous Solution [Volume 25, Issue 4, 2012, Pages 269-278]
-
SANCHEZ MEDIAVILLA, Angel
New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1056-1061]
-
Sandeep Kumar, Y.
Investigation of Wear Behavior of Biopolymers for Total Knee Replacements Through Invitro Experimentation [Volume 33, Issue 8, 2020, Pages 1560-1566]
-
Saneei Siavashy, O.
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Sangdani, M. H
Parameters Identification of an Experimental Vision-based Target Tracker Robot Using Genetic Algorithm [Volume 31, Issue 3, 2018, Pages 480-486]
-
Sangdani, M. H.
Particle Swarm Optimization Based Parameter Identification Applied to a Target Tracker Robot with Flexible Joint [Volume 33, Issue 9, 2020, Pages 1797-1802]
-
Sangeetha, M.
Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
-
Sanggoro, H. B.
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Sanggoro, H. B.
Influence of Project and Affected Local Community Interests Level on Social Conflicts in Indonesian Infrastructure Projects [Volume 35, Issue 7, 2022, Pages 1217-1226]
-
Sanggoro, Heru Bayuaji
Strengthening the Standardisation of Professional Engineering Competencies to Support Sustainable Construction Through Circular Economy Principles in Indonesia [(Articles in Press)]
-
Sangpour, Parvaneh
Graphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1803-1808]
-
Saniei, M.
Space Vector Pulse Width Modulation with Reduced Common Mode Voltage and Current Losses for Six-Phase Induction Motor Drive with Three-Level Inverter [Volume 33, Issue 4, 2020, Pages 586-597]
-
Sanjari, M. J.
Optimal Operation of Multi-microgrid System Considering Uncertainty of Electric Vehicles [Volume 36, Issue 8, 2023, Pages 1398-1408]
-
Sanjari, Sina
Duplex Surface Treatment of AISI 1045 Steel via Plasma Nitriding of Titanized Layer [Volume 28, Issue 8, 2015, Pages 1193-1198]
-
Sanjeevi, S. G.
Multi-criteria– Recommendations using Autoencoder and Deep Neural Networks with Weight Optimization using Firefly Algorithm [Volume 36, Issue 1, 2023, Pages 130-138]
-
Sankar, B.
Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete [Volume 35, Issue 8, 2022, Pages 1629-1640]
-
Santhosh, C.
Multimodal Spatiotemporal Feature Map for Dynamic Gesture Recognition from Real Time Video Sequences [Volume 36, Issue 8, 2023, Pages 1440-1448]
-
Santos, T. F.A.
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
Sapali, S. N
Testing of Environment Friendly Refrigerant R290 for Water Cooler Application (RESEARCH NOTE) [Volume 31, Issue 1, 2018, Pages 157-163]
-
Sapari, N. B.
Further Study of Adsorption of Crude Oils onto Acetylated Corn Silk and its Kinetics and Equilibrium Isotherm [Volume 32, Issue 2, 2019, Pages 229-235]
-
Sapronova, Z.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Saptoadi, H
Modelling and Optimisation of Coconut Shell Drying and Carbonisation Using Multi-response Taguchi Method with Multi-response Signal-to-noise Procedure [Volume 31, Issue 3, 2018, Pages 464-472]
-
Sarabandi, A. H.
Slip Velocity in Flow and Heat Transfer of Non-newtonian Fluids in Microchannels [Volume 30, Issue 7, 2017, Pages 1054-1065]
-
Saraei, R.
Quasi-Static Theory for Uniaxial Chiral Omega Media [Volume 16, Issue 3, 2003, Pages 233-246]
-
Saraei, R.
Auxiliary Potentials In Chiral Media [Volume 20, Issue 2, 2007, Pages 147-158]
-
Sarafrazi, S.R.
Static and dynamic nonlinear analysis of steel frame with semi-rigid connections [Volume 24, Issue 3, 2011, Pages 203-222]
-
Sarala, L
Seismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE) [Volume 32, Issue 11, 2019, Pages 1543-1547]
-
Saranprabhu, M. K
Experimental Study on Flow Characteristics Around Twin Wind Blades (RESEARCH NOTE) [Volume 31, Issue 5, 2018, Pages 820-825]
-
Saravanan, R.
Reduction of Odometry Error in a two Wheeled Differential Drive Robot (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 359-366]
-
Sardarzadeh, F.
An Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams [Volume 33, Issue 3, 2020, Pages 505-512]
-
Sarfaraz, A. H.
Designing a Sustainable Reverse Logistics Network Considering the Conditional Value at Risk and Uncertainty of Demand under Different Quality and Market Scenarios [Volume 33, Issue 11, 2020, Pages 2252-2271]
-
Sargade, V. G.
Tool Life of Uncoated and Coated Inserts during Turning of Ti6Al4V-ELI under Dry and Minimum Quantity Lubrication Environments [Volume 36, Issue 2, 2023, Pages 191-198]
-
Sargin, B. V.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Sarhadi, Faramarz
Energy and Exergy Evaluation of Multi-channel Photovoltaic/Thermal Hybrid System: Simulation and Experiment [Volume 32, Issue 11, 2019, Pages 1665-1680]
-
Sari, A.
Digital Assistant for Pharmacists Using Indonesian Language Based on Rules and Artificial Intelligence [Volume 37, Issue 9, 2024, Pages 1746-1754]
-
Sari, E. N.
Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
-
Sarkar, T
Test Power Reduction by Simultaneous Don’t Care Filling and Ordering of Test Patterns Considering Pattern Dependency [Volume 31, Issue 5, 2018, Pages 752-758]
-
Sarkar, Trupa
Look up Table Based Low Power Analog Circuit Testing [Volume 29, Issue 9, 2016, Pages 1247-1256]
-
Sarkheil, H
Fuzzy Wastewater Quality Index Determination for Environmental Quality Assessment under Uncertain and Vagueness Conditions [Volume 31, Issue 8, 2018, Pages 1196-1204]
-
Sarlak, A
Experimental Study on Using Uniform Tuned Liquid Column Damper for Structural Control of Buildings Resting on Loose Soil [Volume 31, Issue 7, 2018, Pages 1028-1037]
-
Sarlak, A.
Numerical and Experimental Study of Soil-structure Interaction in Structures Resting on Loose Soil Using Laminar Shear Box [Volume 30, Issue 11, 2017, Pages 1654-1663]
-
Sarma, A. D.
Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
-
Sarode, Avinash
Design of Air Distribution System for Operation Theatre Using Flow Visualization Techniques to Improve Flow Characteristics [Volume 33, Issue 1, 2020, Pages 164-169]
-
Sarparast, Z.
Experimental and Numerical Analysis of Permeability in Porous Media [Volume 33, Issue 11, 2020, Pages 2408-2415]
-
Sarsabili, Mohammad Reza
Studying Performance of Dubinin-astakhov and Dubinin-raduchkevic Equations to Evaluate Nanopore Volume and Pore Size of MCM-41 Particles (TECHNICAL NOTE) [Volume 27, Issue 10, 2014, Pages 1511-1518]
-
Sartika, J.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Sarvalishah, M.
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Sarvi, Mohammad
A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
-
Saryazdi, S.
Visual Pattern Image Coding by a Morphological Approach (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 371-378]
-
Sashidhar, C.
Durability Performance of Self Compacting Concrete Incorporating Alccofine and Fly Ash [Volume 33, Issue 8, 2020, Pages 1522-1528]
-
Sassani, F.
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Sastrosubroto, A. S.
Generator Scheduling Optimization Involving Emission to Determine Emission Reduction Costs [Volume 35, Issue 8, 2022, Pages 1468-1478]
-
Sastry, V. R.
A Numerical Modelling Approach to Assess Deformations of Horseshoe Cavern on Account of Rock Mass Characteristics and Discontinuities [Volume 36, Issue 7, 2023, Pages 1259-1268]
-
Sata, S. A.
Supercritical Fluid Extraction of Carotenoid from Microalgae with Projected Thermodynamic Models (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 117-126]
-
SATHISH GANDHI, V.C.
Experimental Investigation on Hydrous Methanol Fueled HCCI Engine Using Spark Assisted Method [Volume 28, Issue 7, 2015, Pages 1099-1107]
-
Sathya, P. D.
Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
-
Satish Chembuly, V. V. M. J.
Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
-
Satish Kumar, P.
Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques [Volume 30, Issue 11, 2017, Pages 1762-1770]
-
Sattari-Naeini, Vahid
Fuzzy-rough Information Gain Ratio Approach to Filter-wrapper Feature Selection [Volume 30, Issue 9, 2017, Pages 1326-1333]
-
Sattarpour, Tohid
Assessing the Impact of Size and Site of DGs and SMs in Active Distribution Networks for Energy Losses Cost [Volume 28, Issue 7, 2015, Pages 1002-1010]
-
Satyanarayana, P.
Categorization of Multiple Crops Using Geospatial Technology, Machine Learning and Google Earth Engine [Volume 37, Issue 9, 2024, Pages 1763-1772]
-
Savadi Hosseini, M.
A Hybrid Deep Learning Architecture Using 3D CNNs and GRUs for Human Action Recognition [Volume 33, Issue 5, 2020, Pages 959-965]
-
SavadKouhi, L.
Research and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 193-201]
-
Savier, J.S.
A Multi-Objective Method for Network Reconfiguration (TECHNICAL NOTE) [Volume 22, Issue 4, 2009, Pages 333-350]
-
SAVIO, MAX
Space Vector Control Scheme of Three Level ZSI Applied to Wind Energy Systems [Volume 25, Issue 4, 2012, Pages 275-282]
-
Sawant, S. H.
Dry Sliding Behaviour Study of Novel Low-metallic Friction Materials by using DoE-Taguchi Method [Volume 37, Issue 3, 2024, Pages 452-459]
-
Sawant, V. A.
Flood Hazard Assessment of Water-Front Geosynthetic Reinforced Soil Wall for Dam Regulation Rule Level [Volume 36, Issue 4, 2023, Pages 640-648]
-
Sayari, A.
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Sayarshad, H.R.
Solving a New Multi-Period Mathematical Model of the Rail-Car Fleet Size and Car Utilization by Simulated Annealing [Volume 22, Issue 1, 2009, Pages 33-46]
-
Saychenko, L. A.
Hydrodynamic Modeling and Evaluation of Partial Substitution of Cushion Gas During Creation of Temporary Underground Gas Storage in an Aquifer [Volume 37, Issue 7, 2024, Pages 1221-1230]
-
Sayedi, B.
Novel Method for the Preparation of Copper Phthalocyanin Blue Nanoparticles in an Electrochemical Cell Irradiated by Microwave (RESEARCH NOTE) [Volume 20, Issue 3, 2007, Pages 257-262]
-
Sayehvand, H.
Numerical Study of Flow and Heat Transfer in a Square Driven Cavity [Volume 17, Issue 3, 2004, Pages 301-317]
-
Sayevand, H. O.
Investigation of Shell Side Overall Performance of a Novel Shell-and-Double-Concentric –tube Heat Exchanger with Simple and Perforated Helical Baffles [Volume 36, Issue 11, 2023, Pages 1972-1981]
-
Sayyadi, A.
Effect of Serpentine Aggregates on the Shielding, Mechanical, and Durability Properties of Heavyweight Concrete [Volume 35, Issue 11, 2022, Pages 2256-2264]
-
Sayyar Kavardi, Seyyedeh Sepideh
Optimization of Lipase Immobilization [Volume 25, Issue 1, 2012, Pages 1-10]
-
Sazali, Ezza Syuhada
Synthesis of Fe3O4/SiO2/PEG Nanocomposite from Minerals Sands: Kinetic Adsorption Heavy Metal Ion from Aqueous Solution [(Articles in Press)]
-
Sazali, N.
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 Co-polyimide [Volume 31, Issue 8, 2018, Pages 1356-1363]
-
SBITI, Nawal
Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
-
Schinzinger, R.
Connectivity as a Measure of Power System Integrity [Volume 1, Issue 2, 1988, Pages 97-110]
-
Sebt, M.H.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Sebti, A.
A Hybrid Approach to Sentiment Analysis of Iranian Stock Market User’s Opinions [Volume 36, Issue 3, 2023, Pages 573-584]
-
Sedaaghi, Mohammad Hossein
Experimental Investigation of the Effect of Splitter Plate Angle on the Under-Scouring of Submarine Pipeline Due to Steady Current and Clear Water Condition [Volume 28, Issue 3, 2015, Pages 368-377]
-
Sedaghat, M.
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Sedaghat Ahangari Hosseinzadeh, A.
Evaluation of Corrosion Resistance of Bi-layered Plasma-sprayed Coating on Titanium Implants [Volume 35, Issue 4, 2022, Pages 635-643]
-
Sedaghatkish Khoshkbijari, Ahad
Receding Horizon Based Control of Disturbed Upright Balance with Consideration of Foot Tilting(RESEARCH NOTE) [Volume 26, Issue 10, 2013, Pages 1243-1254]
-
Sedghi Asl, Mohammad
Estimation of Friction Coefficient in Sediment Contained Flow through Rockfill [Volume 26, Issue 2, 2013, Pages 187-196]
-
Sedighi, Ali Reza
Optimal Placement and Sizing of Fault Current Limiter in a Real Network: a Case Study (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 402-409]
-
Sedighi, Ali Reza
A Novel Method for Implementing of Time-of-use to Improve the Performance of Electric Distribution Systems: A Case Study [Volume 30, Issue 3, 2017, Pages 357-365]
-
Sedighi, K.
Experimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid [Volume 27, Issue 2, 2014, Pages 333-340]
-
Sedighi, K.
Advanced Exergy Scrutiny of a Dual-loop Organic Rankine Cycle for Waste Heat Recovery of a Heavy-duty Stationary Diesel Engine [Volume 35, Issue 4, 2022, Pages 644-656]
-
Sedighi Zade, M.
A New Intelligent Controller for Parallel DC/DC Converters [Volume 27, Issue 1, 2014, Pages 131-142]
-
Seenu, S.
Stimulation Behaviour Study on Clay Treated with Ground Granulated Blast Slag and Groundnutshell Ash [Volume 32, Issue 5, 2019, Pages 673-678]
-
Seid, S.
Design and Evaluation of a Magnetorheological Damper Based Prosthetic Knee [Volume 32, Issue 1, 2019, Pages 146-152]
-
Seid-mohammadi, A.
Sonocatalytic Degradation of p-Chlorophenol by Nanoscale Zero-valent Copper Activated Persulfate under Ultrasonic Irradiation in Aqueous Solutions [Volume 33, Issue 6, 2020, Pages 1061-1069]
-
Seif, M.S.
The Effect of Asymmetric Water Entry on the Hydrodynamic Impact [Volume 17, Issue 2, 2004, Pages 205-212]
-
Seif, M.S.
The Effect of Added Mass Fluctuation on Heave Vibration of TLP [Volume 18, Issue 3, 2005, Pages 219-228]
-
Seifbarghy, M.
Managing Environmentally Conscious in Designing Closed-loop Supply Chain for the Paper Industry [Volume 30, Issue 7, 2017, Pages 1038-1047]
-
Seifbarghy, M.
Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
-
Seifbarghy, M.
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Seifi, A.
A Non-Sinusoidal Reference Wave for Pwm Ac Drives [Volume 6, Issue 1, 1993, Pages 25-36]
-
Seifi, F.
Time Series Forecasting of Bitcoin Price Based on Autoregressive Integrated Moving Average and Machine Learning Approaches [Volume 33, Issue 7, 2020, Pages 1293-1303]
-
Seifi, H.
Basic Issues in Identification Scheme of a Self-Tuning Power System Stabilizer [Volume 5, Issue 3, 1992, Pages 91-98]
-
Seifi, H.
Some Issues in Implementation of a Voltage Stability Analysis Function in an Energy Management System Environment [Volume 11, Issue 3, 1998, Pages 147-156]
-
Seifi, H.
Hydrothermal Optimal Power Flow Using Continuation Method [Volume 14, Issue 2, 2001, Pages 113-122]
-
Seifi, M.
A New Bi-Objective Model for a Multi-Mode Resource-Constrained Project Scheduling Problem with Discounted Cash Flows and four Payment Models [Volume 21, Issue 4, 2008, Pages 347-360]
-
Seifi, S.
Design of a High Range, High Efficiency Spread Spectrum Transmitter for Audio Communication Applications [Volume 32, Issue 8, 2019, Pages 1144-1154]
-
Seifi, Sina
Analysis of Oscillation Amplitude and Phase Error in Multiphase LC Oscillators [Volume 26, Issue 6, 2013, Pages 587-596]
-
Seifolazadeh, A.
Determination of the Rheological Properties of Hydroxyl Terminated Polybutadiene (HTPB) Mixtures With Energetic Materials and Presenting Empricial Models [Volume 18, Issue 4, 2005, Pages 413-420]
-
Seifollahi, M.
Effect of Aging Treatment on Microstructure and Mechanical Properties of Al0.7CoCrFeNi High Entropy Alloy [Volume 36, Issue 6, 2023, Pages 1060-1065]
-
Sekhavat, M.
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Selahi, Ehsan
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings [Volume 27, Issue 3, 2014, Pages 475-486]
-
Selk Ghafari, Ali
Effect of Target Impedance Selection on the Lower Extremity Assistive Exoskeleton Performance [Volume 29, Issue 6, 2016, Pages 843-851]
-
Selvan, J.
An Innovative and Reliable Hybrid Cooling Method for Electric Vehicle Motors [Volume 37, Issue 7, 2024, Pages 1263-1273]
-
Semin, Semin
Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile [Volume 21, Issue 3, 2008, Pages 291-302]
-
Semin, Semin
An Experimental Investigation of Diesel Engines Fuel Injection Pressure Effect on Power Performance and Fuel Consumption [Volume 22, Issue 1, 2009, Pages 91-97]
-
Sen, A
Synthesis and Characterization of Porcelain Body Developed from Rice Husk Ash (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 25-31]
-
Senathipathi, N.
An Ultra-low-power Static Random-Access Memory Cell Using Tunneling Field Effect Transistor [Volume 33, Issue 11, 2020, Pages 2215-2221]
-
Sennewald, S.
Resurgent Cauldrons and Their mineralization between Narigan, Esfordi, Kushk, and Seh Chahoon, Central Iran [Volume 1, Issue 2, 1988, Pages 149-161]
-
Senthil, P.
Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy [Volume 26, Issue 4, 2013, Pages 365-374]
-
Senthil Kumar, N.
Seamless Transition in Grid-connected Microgrid System using Proportional Resonant Controller [Volume 33, Issue 10, 2020, Pages 1951-1958]
-
Sepahvand, S.
Dye Adsorption on the Blends of Saffron Petals Powder with Activated Carbon: Response Surface Methodology [Volume 31, Issue 12, 2018, Pages 2001-2008]
-
Sepas Hokmabadi, A.
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Sepehrian, Hamid
Zinc Adsorption Properties of Alginate-SBA-15 Nanocomposite [Volume 28, Issue 10, 2015, Pages 1415-1422]
-
Sepehrian, Hamid
Adsorptive Behavior of an Amberlite Anion Exchanger Resin for Uranium (VI) Sorption in the Presence of Sulfate Anions [Volume 29, Issue 2, 2016, Pages 170-175]
-
Sepehrian, Hamid
Uranium Ions Removal Using Amberlite CG-400 Anion Exchanger Resin in the Presence of Sulfate Anions [Volume 29, Issue 6, 2016, Pages 728-734]
-
Sepehrian, Hamid
Uranium Removal from Aqueous Solution Using Ion-Exchange Resin DOWEX® 2x8 in the Presence of Sulfate Anions [Volume 29, Issue 12, 2016, Pages 1677-1683]
-
Sepehrian, Hamid
Fluoride Ions Removal using Yttrium Alginate Biocomposite from an Aqueous Solution (RESEARCH NOTE) [Volume 30, Issue 1, 2017, Pages 1-6]
-
Seradjian, M.R.
Kohonen Self Organizing for Automatic Identification of Cartographic Objects [Volume 15, Issue 2, 2002, Pages 109-116]
-
Seraj, O.
A Tabu Search Method for a New Bi-Objective Open Shop Scheduling Problem by a Fuzzy Multi-Objective Decision Making Approach (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 269-282]
-
Sermsrithong, C.
Structural and Optical Properties of Bismuth-doped ZnO Nanoparticles Synthesized by Co-precipitation [Volume 35, Issue 12, 2022, Pages 2344-2349]
-
Setak, Mostafa
Designing Incomplete Hub Location-routing Network in Urban Transportation Problem [Volume 26, Issue 9, 2013, Pages 997-1006]
-
Setak, Mostafa
A Node-based Mathematical Model towards the Location Routing Problem with Intermediate Replenishment Facilities under Capacity Constraint [Volume 27, Issue 6, 2014, Pages 911-920]
-
Setak, Mostafa
An Inventory Model for Deteriorating Items Using Vendor-Managed Inventory Policy [Volume 27, Issue 7, 2014, Pages 1081-1090]
-
Setak, Mostafa
Designing of Supply Chain Coordination Mechanism with Leadership Considering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1888-1896]
-
Setak, Mostafa
Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm [Volume 28, Issue 11, 2015, Pages 1624-1633]
-
Setak, Mostafa
A Time Dependent Pollution Routing Problem in Multi-graph [Volume 30, Issue 2, 2017, Pages 234-242]
-
Setak, Mostafa
Selecting Efficient Service-providers in Electric Power Distribution Industry Using Combinatorial Reverse Auction [Volume 30, Issue 9, 2017, Pages 1342-1351]
-
Setayeshi, Saeed
An Analysis to Wealth Distribution Based on Sugarscape Model in an Artificial Society [Volume 20, Issue 3, 2007, Pages 211-224]
-
Sethy, Kaliprasanna
Estimation of Local Scour Depth Around Bridge Pier [(Articles in Press)]
-
Setia, B.
Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
-
Setia, Baldev
Constriction Scour In Pressurized Flow Condition (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 237-246]
-
Setiawan, E. B.
Comparative Analysis of Web Hosting Server Performance [Volume 36, Issue 3, 2023, Pages 558-564]
-
Setiawan, I.
Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
-
Setiawan, Joni
Influence of Concentration of Copper Electrolyte, Voltage, and Time of Electroforming on Conductive Acrylonitrile Butadiene Styrene Parts on Deposition Rate and Microstructure [(Articles in Press)]
-
Setiyadi, A.
Comparative Analysis of Web Hosting Server Performance [Volume 36, Issue 3, 2023, Pages 558-564]
-
Setoudeh, F.
Improving 3-D Imaging Breast Cancer Diagnosis Systems Using a New Method for Placement of Near-infrared Sources and Detectors [Volume 33, Issue 6, 2020, Pages 1105-1113]
-
Setyarini, P. H.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Seydi, V.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Seyedaliakbar, S. M.
Multi-objective Optimization of Multi-vehicle Relief Logistics Considering Satisfaction Levels under Uncertainty [Volume 33, Issue 5, 2020, Pages 814-824]
-
Seyedaliakbar, S. M.
A Location-Routing Model for Assessment of the Injured People and Relief Distribution under Uncertainty [Volume 33, Issue 7, 2020, Pages 1274-1284]
-
Seyedan, S.E.
A Simple Transformation Method in Skewness Reduction [Volume 24, Issue 2, 2011, Pages 169-175]
-
Seyedarabi, Hadi
Application of Combined Local Object Based Features and Cluster Fusion for the Behaviors Recognition and Detection of Abnormal Behaviors [Volume 28, Issue 11, 2015, Pages 1597-1604]
-
Seyedhosseini, S. M.
Multi-objective Optimization of Multi-vehicle Relief Logistics Considering Satisfaction Levels under Uncertainty [Volume 33, Issue 5, 2020, Pages 814-824]
-
Seyedhosseini, S. M.
An Extension to the Economic Production Quantity Problem with Deteriorating Products Considering Random Machine Breakdown and Stochastic Repair Time [Volume 33, Issue 8, 2020, Pages 1567-1578]
-
Seyedhosseini, S. M.
A Location-Routing Model for Assessment of the Injured People and Relief Distribution under Uncertainty [Volume 33, Issue 7, 2020, Pages 1274-1284]
-
Seyedhosseini, S. M.
A Green Hazardous Waste Location-routing Problem Considering the Risks Associated with Transportation and Population [Volume 33, Issue 11, 2020, Pages 2272-2284]
-
Seyed Hosseini, S. M.
Functional Model of Integrated Maintenance in Petrochemical Industries [Volume 37, Issue 6, 2024, Pages 1106-1117]
-
Seyed- Hosseini, S.M.
Economic and Effectiveness Evaluation Analysis of Some Resource Allocation Procedures [Volume 9, Issue 2, 1996, Pages 21-28]
-
Seyed- Hosseini, S.M.
The Neural Network Modeling Approach for Long Range Expansion Policy of Power Plant Ccenters [Volume 15, Issue 1, 2002, Pages 75-80]
-
Seyed- Hosseini, S.M.
Mathematical Programming Approach To Allocate Local Or National Resources For Bridge Maintenance Rehabilitation & Replacement Planning (RESEARCH NOTE) [Volume 16, Issue 4, 2003, Pages 383-392]
-
Seyed-Hosseini, S.M.
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Seyedi, I.
Truck Scheduling in a Cross-Docking Terminal by Using Novel Robust Heuristics [Volume 32, Issue 2, 2019, Pages 296-305]
-
Seyedi, S. M. A.
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
-
Seyedi-Nasab, S.M.
Corrosion Behavior of a Fe-25at%Sn Supersaturated Solid Solution in H3PO4 Solution [Volume 25, Issue 2, 2012, Pages 127-134]
-
Seyedjafari Olia, S. S.
Seismic Behavior of Asymmetric Two-Story X-braced Frames [Volume 32, Issue 4, 2019, Pages 495-502]
-
Seyedkashi, S. M. H.
Experimental Study on Warm Incremental Tube Forming of AA6063 Aluminum Tubes [Volume 33, Issue 9, 2020, Pages 1773-1779]
-
Seyed Lotfali, S. H.
Analysis of Role of Cloud Computing in Providing Internet Banking Services: Case Study Bank Melli Iran [Volume 35, Issue 5, 2022, Pages 1082-1088]
-
Seyedraoufi, Zahra-Sadat
Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method [Volume 32, Issue 6, 2019, Pages 860-865]
-
Seyed Razzaghi, Mehran
The Effects of Internal and External Stiffeners on Hysteretic Behavior of Steel Beam to CFT Column Connections [Volume 27, Issue 7, 2014, Pages 1005-1014]
-
Seyed Razzaghi, Mehran
Predicting the buckling Capacity of Steel Cylindrical Shells with Rectangular Stringers under Axial Loading by using Artificial Neural Networks [Volume 28, Issue 8, 2015, Pages 1154-1159]
-
Seyed Reihani, S.M.
Study of the Enhanced Precipitation of an Aluminium 6061 Alloy Reinforced by SiC Particles in the Range of β\" Phase Temperature (RESEARCH NOTE) [Volume 8, Issue 1, 1995, Pages 55-59]
-
Seyyedbarzegar, S. M.
Experimental Analysis and Physical Mechanism Investigation of Al2O3 Effect on New and Aged Transformer Oil Properties [Volume 36, Issue 3, 2023, Pages 548-557]
-
Seyyedvalilu, Mir Hatef
Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization [Volume 27, Issue 9, 2014, Pages 1431-1438]
-
Seyyedvalilu, Mir Hatef
A Parametric Study on Exergy and Exergoeconomic Analysis of a Diesel Engine based Combined Heat and Power System [Volume 28, Issue 4, 2015, Pages 608-617]
-
Seyyedyazdi, S. J
Improving Super-resolution Techniques via Employing Blurriness Information of the Image [Volume 31, Issue 2, 2018, Pages 241-249]
-
Seyyedyazdi, S. J.
Super-resolution of Defocus Blurred Images [Volume 33, Issue 4, 2020, Pages 539-545]
-
Sezavar, A.
A Modified Grasshopper Optimization Algorithm Combined with CNN for Content Based Image Retrieval [Volume 32, Issue 7, 2019, Pages 924-930]
-
Sezavar, A.
A Noise-aware Deep Learning Model for Automatic Modulation Recognition in Radar Signals [Volume 36, Issue 8, 2023, Pages 1459-1467]
-
Sha, Y.
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Shaabani, H.
Numerical Simulation of Frost Formation in Interrupted Micro Channel Heat Sinks Considering Microfluidic Effects in Slip Regime [Volume 33, Issue 12, 2020, Pages 2556-2562]
-
Shabakhty, N.
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Shabalova, A.
Diversification of Portfolio of International Oil and Gas Assets using Cluster Analysis [Volume 36, Issue 10, 2023, Pages 1783-1792]
-
Shaban Al-Ani, M.
Gait Recognition based on Measurements of Moving Human Legs Angles [Volume 33, Issue 5, 2020, Pages 975-983]
-
Shabani, R.
Stabilization of Electrostatically Actuated Micro-pipe Conveying Fluid Using Parametric Excitation [Volume 30, Issue 12, 2017, Pages 1911-1918]
-
Shabani, Y.
Natural frequency of Sandwich Beam Structures with Two Dimensional Functionally Graded Porous Layers Based on Novel Formulations [Volume 35, Issue 11, 2022, Pages 2092-2101]
-
Shabanpour, A.
Integrated Linear Integer Model of a Fleet Allocation and Aircraft Routing Problem with Operational Constraints [Volume 36, Issue 4, 2023, Pages 669-681]
-
Shademani, M.
Numerical Study of Shunting Effect in Three-steel Sheets Resistance Spot Welding [Volume 35, Issue 2, 2022, Pages 406-416]
-
Shadhar, A. K.
Pavement Maintenance Management Using Multi-objective Optimization: (Case Study: Wasit Governorate-Iraq) [Volume 33, Issue 11, 2020, Pages 2155-2161]
-
Shadmand, M.
Retrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets [Volume 33, Issue 5, 2020, Pages 770-783]
-
Shadmand, M.
Strengthening of RC Beams using Steel Plate-Fiber Concrete Composite Jackets (Finite Element Simulation and Experimental Investigation) [Volume 35, Issue 1, 2022, Pages 73-92]
-
Shaeiri, Z.
Fast Unsupervised Automobile Insurance Fraud Detection Based on Spectral Ranking of Anomalies [Volume 33, Issue 7, 2020, Pages 1240-1248]
-
Shaeiri, Zahra
Modification of the Fast Global K-means Using a Fuzzy Relation with Application in Microarray Data Analysis [Volume 25, Issue 4, 2012, Pages 283-292]
-
Shaeisi, G. H.
A Proposed Improved Hybrid Hill Climbing Algorithm with the Capability of Local Search for Solving the Nonlinear Economic Load Dispatch Problem [Volume 33, Issue 4, 2020, Pages 575-585]
-
Shafabakhsh, G.
Influences of Surface Characteristics and Modified Asphalt Binders on Interface Shear Strength [Volume 32, Issue 6, 2019, Pages 805-812]
-
Shafabakhsh, G.
Single-vehicle Run-off-road Crash Prediction Model Associated with Pavement Characteristics [Volume 33, Issue 7, 2020, Pages 1375-1386]
-
Shafabakhsh, G. A.
New Model for Visco-Elastic Behavior of Asphalt Mixture with Combined Effect of Stress and Temperature [Volume 31, Issue 6, 2018, Pages 894-902]
-
Shafaei, J.
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Shafaei, J.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Shafaei, Rasoul
Case Mix Planning using The Technique for Order of Preference by Similarity to Ideal Solution and Robust Estimation: a Case Study [Volume 30, Issue 9, 2017, Pages 1362-1371]
-
Shafagh, E.
Influence of Operation Conditions Upon the Dynamic Steady State Performance of Switched Reluctance Motor [Volume 12, Issue 4, 1999, Pages 219-232]
-
Shafaghat, R.
Foil Application to Reduce Resistance of Catamaran under High Speeds and Different Operating Conditions [Volume 32, Issue 1, 2019, Pages 106-111]
-
Shafaghat, R.
Experimental Assessment of a Fixed On-Shore Oscillating Water Column Device: Case Study on Oman Sea [Volume 33, Issue 3, 2020, Pages 494-504]
-
Shafaghat, R.
Numerical Simulation of Hydrodynamic Properties of Alex Type Gliders [Volume 33, Issue 7, 2020, Pages 1387-1396]
-
Shafaghat, R.
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Shafaghat, R.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Shafaghat, R.
Experimental Study on Performance Assessment of Hydraulic Power Take-off System in Centipede Wave Energy Converter Considering Caspian Sea Wave Characteristics [Volume 35, Issue 5, 2022, Pages 883-899]
-
Shafaghat, R.
Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
-
Shafaghat, R.
Experimental Investigation on the Effect of Flow Rate and Load on the Hydrodynamic Behavior and Performance of an Archimedes Screw Turbine [Volume 36, Issue 4, 2023, Pages 733-745]
-
Shafaghat, Rouzbeh
Numerical Simulation of Cavitation in Mixed Flow Pump [Volume 28, Issue 6, 2015, Pages 956-963]
-
Shafaghat, Rouzbeh
Experimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter [Volume 29, Issue 9, 2016, Pages 1292-1299]
-
Shafaghizadeh, S.
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Shafai-Bajestan, M.
Experimental Modeling and Evaluation Sediment Scouring in Riverbeds around Downstream in Flip Buckets [Volume 33, Issue 10, 2020, Pages 1904-1916]
-
Shafiabadi, Mohammad Hossein
Symmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1447-1454]
-
Shafiai, S. H.
Lattice Boltzmann Method Application on Headwater at Lata Kinjang Waterfall, Malaysia [Volume 33, Issue 5, 2020, Pages 760-769]
-
Shafiee, M.
Optimal Control for Descriptor Systems: Tracking Problem (RESEARCH NOTE) [Volume 14, Issue 2, 2001, Pages 123-130]
-
Shafiee, M.
Determination of Optimal Allocation and Penetration Level of Distributed Energy Resources Considering Short Circuit Currents [Volume 33, Issue 3, 2020, Pages 427-438]
-
Shafiee, M.
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Shafiee, Mohammad Reza
A Novel Fuzzy Based Method for Heart Rate Variability Prediction [Volume 27, Issue 7, 2014, Pages 1041-1050]
-
Shafiei, A. K.
Algorithm of Predicting Heart Attack with using Sparse Coder [Volume 36, Issue 12, 2023, Pages 2190-2197]
-
Shafiei, A. R.
Influence of Water Cooling on Orthogonal Cutting Process of Ti-6Al-4V Using Smooth-Particle Hydrodynamics Method [Volume 32, Issue 8, 2019, Pages 1210-1217]
-
Shafiei Nikabadi, M.
Providing a Fuzzy Expert System to Assess the Maturity Level of Companies in Manufacturing Excellence in the Food Industry of Iran [Volume 30, Issue 4, 2017, Pages 532-542]
-
Shafiei seifabadi, Hossein
Effect of the Height Increasing on Steel Buildings Retrofitted by Buckling Restrained Bracing Systems and TTD Damper [Volume 26, Issue 10, 2013, Pages 1145-1154]
-
Shafie Zadeh, Nadia
A Comparison of Underground Opening Support Design Methods in Jointed Rock Mass (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 235-248]
-
Shah, P. B.
Integration of Remote Sensing and Big Data to Study Spatial Distribution of Urban Heat Island for Cities with Different Terrain [Volume 36, Issue 1, 2023, Pages 71-77]
-
Shah, Sapna
A Biomechanical Approach for the Study of Deformation of Red Cells in Narrow Capillaries [Volume 25, Issue 4, 2012, Pages 309-314]
-
Shah, S. K.
Grape (Vitis Vinifera) Leaf Disease Detection and Classification Using Deep Learning Techniques: A Study on Real-Time Grape Leaf Image Dataset in India [Volume 37, Issue 8, 2024, Pages 1522-1533]
-
Shahabadi, M.
Complementary Periodic Structures for Miniaturization of Planar Antennas [Volume 28, Issue 10, 2015, Pages 1463-1468]
-
Shahabian, F.
A Proposed Method to Evaluate Ultimate Resistance of Plate Girders Subjected to Shear and Patch Loading (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 347-356]
-
Shahanaghi, K.
A Holistic Approach Based on MCDM for Solving Location Problems [Volume 20, Issue 3, 2007, Pages 251-262]
-
Shahanaghi, K.
Functional Model of Integrated Maintenance in Petrochemical Industries [Volume 37, Issue 6, 2024, Pages 1106-1117]
-
Shahandeh Nookabadi, A.
Mathematical Model for Bi-objective Maximal Hub Covering Problem with Periodic Variations of Parameters [Volume 32, Issue 7, 2019, Pages 964-975]
-
Shahavi, M. H.
Generation Process and Performance Evaluation of Engineered Microsphere Agarose Adsorbent for Application in Fluidized-bed Systems [Volume 33, Issue 8, 2020, Pages 1450-1458]
-
Shahavi, Mohammad Hassan
Simulation of Dual Fuel Combustion of Direct Injection Engine with Variable Natural Gas Premixed Ratio [Volume 32, Issue 9, 2019, Pages 1327-1336]
-
Shahbahrami, A.
Parallel Implementation of Particle Swarm Optimization Variants Using Graphics Processing Unit Platform [Volume 30, Issue 1, 2017, Pages 48-56]
-
Shahbahrami, B.
Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
-
Shahbakhsh, M. B.
Empowering Face Recognition Methods using a GAN-based Single Image Super-Resolution Network [Volume 35, Issue 10, 2022, Pages 1858-1866]
-
Shahbaz, M.
Heuristic Process Model Simplification in Frequency Response Domain [Volume 17, Issue 1, 2004, Pages 19-39]
-
Shahbazi, B.
Robust Attitude Control of Spacecraft Simulator with External Disturbances [Volume 30, Issue 4, 2017, Pages 567-574]
-
Shahbazi, N.
Effects of Radial Imperfection on the Load Capacity of Round HSS Columns [Volume 32, Issue 1, 2019, Pages 36-45]
-
Shah Buddin, M. M. H
Extraction of Acetaminophen from Aqueous Solution by Emulsion Liquid Membrane Using Taylor-Couette Column [Volume 31, Issue 8, 2018, Pages 1413-1420]
-
Shahgholi, M.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Shah Hosseini, H.
The Time Adaptive Self Organizing Map for Distribution Estimation [Volume 15, Issue 1, 2002, Pages 23-34]
-
Shahi, H.
on the Elastic Stability of Sleeve Stiffened Hollow Columns; Focusing on Determination of Optimal Design Curves (TECHNICAL NOTE) [Volume 12, Issue 3, 1999, Pages 195-203]
-
Shahi, J.
The Influence of Urban Network Features on the Quality of Traffic Service (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 167-174]
-
Shahi1, Saideh Sadat
Xylanase Production under Solid State Fermentation by Aspergillus niger [Volume 24, Issue 3, 2011, Pages 197-208]
-
Shahidehpour, M.
Transmission Planning in Deregulated Environments [Volume 15, Issue 3, 2002, Pages 245-255]
-
Shahidi, Farhad
Influential Factor in Improving the Seismic Performance of the Kaiser Bolted Bracket Moment Connection [Volume 26, Issue 2, 2013, Pages 163-176]
-
Shahidi, Farhad
Non-Linear Behavior of New (FSFN) Moment Resisting Connections in Comparison to the Existing KBB Connections in Steel Frames [Volume 26, Issue 10, 2013, Pages 1119-1134]
-
Shahidi, Farhood
Non-Linear Behavior of New (FSFN) Moment Resisting Connections in Comparison to the Existing KBB Connections in Steel Frames [Volume 26, Issue 10, 2013, Pages 1119-1134]
-
Shahidi, Seyed-Ahmad
Kinetics of Reshteh Khoshkar Color Changes During Atmospheric and Vacuum Deep-fat Frying [Volume 29, Issue 12, 2016, Pages 1670-1676]
-
Shahi jounaghani, M.
The Efficiency of Hybrid BNN-DWT for Predicting the Construction and Demolition Waste Concrete Strength [Volume 33, Issue 8, 2020, Pages 1544-1552]
-
Shahin, M
Optimal Policy of Condition-Based Maintenance Considering Probabilistic Logistic Times and the Environmental Contamination Issues [Volume 31, Issue 2, 2018, Pages 357-364]
-
Shahinpoor, M.
Modeling Flexibility Effects in Robotic Arms Via the Modified 4x4 D-H Homogeneous Transformation [Volume 3, Issue 3, 1990, Pages 124-133]
-
Shahiri, Jaber
Effects of Partial Substitution of Styrene-butadiene-styrene with Granulated Blast-furnace Slag on the Strength Properties of Porous Asphalt [Volume 30, Issue 1, 2017, Pages 40-47]
-
Shahiri, M. A.
Kinesiological Description of Hippotherapy as a Treatment Modality [Volume 33, Issue 11, 2020, Pages 2347-2355]
-
Shahiri Tabarestani, Maede
Identification of Volatile Organic Compounds from Trichoderma virens (6011) by GC-MS and Separation of a Bioactive Compound via Nanotechnology [Volume 29, Issue 10, 2016, Pages 1347-1353]
-
Shahmandi, A.
The Effect of Using Reinforced Granular Blanket and Single Stone Column on Improvement of Sandy Soil: Experimental Study [Volume 36, Issue 8, 2023, Pages 1532-1547]
-
Shahmardani, Mahdieh
Moving Load Analysis of Submerged Floating Tunnels [Volume 25, Issue 1, 2012, Pages 17-24]
-
Shahmardani, Mahdieh
Dynamic Response of Submerged Vertical Cylinder with Lumped Mass under Seismic Excitation [Volume 27, Issue 10, 2014, Pages 1547-1556]
-
Shahmir, S.
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Shahmiri, M.
The Effects of Gating Systems on the Soundness of Lost Foam Casting (LFC) Process of Al-Si Alloy (A.413.0) [Volume 20, Issue 2, 2007, Pages 157-166]
-
Shahmohamadi, P.
Convective Heat Transfer from a Heated Rotating Disk at Arbitrary Inclination Angle in Laminar Flow [Volume 26, Issue 8, 2013, Pages 865-874]
-
Shah-Mohammadi-Azar, Ali
Thermo-Elastic Damping in Nano-beam Resonators Based on Nonlocal Theory [Volume 26, Issue 12, 2013, Pages 1505-1514]
-
Shah-Mohammadi-Azar, Ali
Mechanical Response of a Piezoelectrically Sandwiched Nano-Beam Based on the Non-Local Theory [Volume 26, Issue 12, 2013, Pages 1515-1524]
-
Shahmoradian, M. M.
Secrecy of Communications in Data Transmission by Impulses with Unknown Moments of Appearance and Disappearance [Volume 32, Issue 4, 2019, Pages 548-554]
-
Shahnazari, M.R.
Numerical Modeling of Mold Filling and Curing in Non-Isothermal RTM Process (RESEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 391-400]
-
Shahnazari, M.R.
Comparison of Thermal Dispersion Effects for Single and two Phase Analysis of Heat Transfer in Porous Media [Volume 24, Issue 1, 2011, Pages 81-91]
-
ShahNazari, Mohammad Reza
A NOVEL HOMOTOPY PERTURBATION METHOD: KOUROSH´S METHOD FOR A THERMAL BOUNDARY LAYER IN A SATURATED POROUS MEDIUM [Volume 25, Issue 1, 2012, Pages 59-64]
-
Shahnazari Shahrezaei, Parisa
Solving a bi-objective manpower scheduling problem considering the utility of objective functions [Volume 24, Issue 3, 2011, Pages 251-262]
-
Shahnazari-Shahrezaei, P.
Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
-
Shahparasti, M.
Design and Analysis of a Power Quality Improvement System for Photovoltaic Generation Based on LCL-Type Grid Connected Inverter [Volume 37, Issue 2, 2024, Pages 252-267]
-
Shahpari, A.
The Use of Monte-Carlo Simulations in Seismic Hazard Analysis in Tehran and Surrounding Areas [Volume 25, Issue 2, 2012, Pages 159-166]
-
Shahrabi, T.
Dealloying and Stress Corrosion Craking of Copper Alloys in Cu(I) Solutions [Volume 3, Issue 3, 1990, Pages 112-117]
-
Shahrabi, T.
Synergistic Influence of Benzoate Ions on Inhibition of Corrosion of Mild Steel in 0.5m Sulfuric Acid by Benzotriazole [Volume 16, Issue 3, 2003, Pages 255-264]
-
Shahraeini, M.
A Complex Network-based Approach for Designing of Wide Area Measurement Systems in Smart Grids using Adam-Eve Like Genetic Algorithm [Volume 37, Issue 2, 2024, Pages 298-311]
-
Shahraini, S.I.
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Shahrajabian, H.
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
-
Shahrajabian, H.
Effect of nGO on Morphology, Mechanical Properties and Thermal Behavior of PLA/nGO Sheets Before and After Thermoforming: An Experimental Study [Volume 36, Issue 9, 2023, Pages 1695-1703]
-
Shahraki, F
Online Monitoring for Industrial Processes Quality Control Using Time Varying Parameter Model [Volume 31, Issue 4, 2018, Pages 524-532]
-
Shahraki, F.
Hydrogen Distribution in Refinery with Nonlinear Programming [Volume 18, Issue 2, 2005, Pages 165-176]
-
Shahramifar, Maedeh
A Multi-objective Imperialist Competitive Algorithm for a Capacitated Single-allocation Hub Location Problem [Volume 26, Issue 6, 2013, Pages 605-620]
-
Shahriari, A.
Providing an Analytical Model in Determining Nanofluids [Volume 30, Issue 12, 2017, Pages 1919-1924]
-
Shahriari, A.
Assessment of Particle-size and Temperature Effect of Nanofluid on Heat Transfer Adopting Lattice Boltzmann Model [Volume 31, Issue 10, 2018, Pages 1749-1759]
-
Shahriari, Alireza
A lattice-adaptive model for solving acoustic wave equations based on the lattice Boltzmann method [(Articles in Press)]
-
Shahriarian, Soodabeh
Simulation of Premixed Combustion Flow around Circular Cylinder using Hybrid Random Vortex [Volume 24, Issue 3, 2011, Pages 269-278]
-
Shahrin, S
Adsorptive Removal of Cr(VI) and Cu(II) Ions from Water Solution using Graphene Oxide-Manganese Ferrite (GMF) Nanomaterials [Volume 31, Issue 8, 2018, Pages 1341-1346]
-
Shahrokhi, M
Wave Energy Dissipation Using Perforated and Non Perforated Piles [Volume 31, Issue 2, 2018, Pages 212-219]
-
Shahrouzi, Seyed Navid
A Novel Method for Tracking Moving Objects using Block-Based Similarity [Volume 22, Issue 1, 2009, Pages 35-42]
-
Shahrum, M. A.
Effective Blended Learning Model Selection Based on Student Learning Style using Analytic Hierarchy Process for an Undergraduate Engineering Course [Volume 36, Issue 12, 2023, Pages 2232-2242]
-
Shahryari, Leila
Calculation of Buckling Load and Eigen Frequencies for Planar Truss Structures with Multi-Symmetry [Volume 24, Issue 4, 2011, Pages 351-366]
-
Shahsavan, M.
Enhancement of Natural Convection Heat Transfer in Annular Enclosures [Volume 2, Issue 1, 1989, Pages 45-54]
-
Shahsavar, Amin
ANALYSIS OF COMBINED CONDUCTION AND RADIATION HEAT TRANSFER IN A RECTANGULAR FURNACE INCLUDING TWO FLAMES [Volume 25, Issue 1, 2012, Pages 65-70]
-
Shahtalebi, K.
Automatic Bounding Estimation in Modified Nlms Algorithm [Volume 15, Issue 1, 2002, Pages 35-42]
-
Shahzad, K
Control of a Robotic Wheel-Chair Prototype for People with Walking Disabilities [Volume 31, Issue 5, 2018, Pages 693-698]
-
Shaigan, J.
The Effect of Sulfate Concentration on COD Removal and Sludge Granulation in UASB Reactors [Volume 16, Issue 1, 2003, Pages 1-10]
-
Shaikhiev, I.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Shaikhzadeh Najar, S.
Structure and Properties of a Natural Celulosic Hollow Fiber [Volume 11, Issue 2, 1998, Pages 101-108]
-
Shaikhzadeh Najar, S.
The Development of a Passive False Twister Mechanism in Handling Low Strength Cotton Slivers on High Draft Spinning Machine [Volume 15, Issue 3, 2002, Pages 311-318]
-
Shaiksha Vali, K.
Eco-friendly Hybrid Concrete Using Pozzolanic Binder and Glass Fibers [Volume 33, Issue 7, 2020, Pages 1183-1191]
-
Shajari, Yazdan
Investigation of Carbon Fiber Reinforced Polymer Composite Welding with a New Tool in Friction Stir Welding Method [Volume 32, Issue 6, 2019, Pages 860-865]
-
Shakeri, M.
Coupled Anaerobic Baffled Reactor (ABR)/Activated Sludge Treatment of Synthetic Wastewater with High Concentration of Sulfate and COD [Volume 16, Issue 1, 2003, Pages 11-20]
-
Shakeri, M.
A Numerical Simulation of Vanadium Redox Flow Batteries [Volume 32, Issue 1, 2019, Pages 153-161]
-
Shakeri, M.
Joining Two Dissimilar Metals of Aluminum 5052 to Austenitic Stainless Steel 304 using Ultrasonic Friction Stir Welding [Volume 36, Issue 8, 2023, Pages 1489-1501]
-
Shakeri, M.
Automatic Optimization of Initial Blank Shape in Production of All Kinds of Rectangular Parts in Computer Aided Hydroforming Process [Volume 37, Issue 4, 2024, Pages 675-691]
-
Shakeri, Zohreh
A Time Dependent Pollution Routing Problem in Multi-graph [Volume 30, Issue 2, 2017, Pages 234-242]
-
Shakhesi, S.
Centralized Path Planning for Multi-aircraft in the Presence of Static and Moving Obstacles [Volume 33, Issue 5, 2020, Pages 923-933]
-
Shakhirev, Vladimir
Shrinkage Curve: Experimental Study and Modelling [Volume 25, Issue 3, 2012, Pages 203-210]
-
Shakhov, M. A.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
Shakib, Benyamin
Extraction of Molybdenum (VI) and Vanadium (V) from Nitrate Solutions Using Coupling of Acid and Solvating Extractants (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1366-1371]
-
Shakib, Najva
An Improvement in Fluorocarbon Chain Re-orientation by Reactive Dyes [Volume 24, Issue 2, 2011, Pages 191-196]
-
Shakibania, S.
Full Characterization of Sarcheshmeh and Khatoon-Abad Copper Anode Slimes: Characterization Impact on the Decopperization Operation [Volume 36, Issue 5, 2023, Pages 934-945]
-
Shakibian, H.
Probabilistic Twin Support Vector Machine for Solving Unclassifiable Region Problem [Volume 35, Issue 1, 2022, Pages 1-13]
-
Shakouri G., H.
A Game Theoretic Approach for Sustainable Power Systems Planning in Transition [Volume 30, Issue 3, 2017, Pages 393-402]
-
Shakurova, N.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Shamami, N.
The Equipment Scheduling and Assignment Problem in the Overhaul Industry [Volume 36, Issue 6, 2023, Pages 1150-1165]
-
Shamekhi Amiri, A.
A possibilistic bi-objective model for a competitive supply chain network design under variable coverage [Volume 31, Issue 9, 2018, Pages 1575-1584]
-
Shamekhi Amiri, M.
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Shamesri, K.
Numerical Study of Water-air Ejector using Mixture and Two-phase Models [Volume 35, Issue 2, 2022, Pages 307-318]
-
Shamgholi, Maryam
Document Image Dewarping Based on Text Line Detection and Surface Modeling (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1855-1862]
-
Shams, F.
Web Service Choreography Verification Using Z Formal Specification [Volume 29, Issue 11, 2016, Pages 1549-1557]
-
Shams, M.
Deposition of Various Shapes Particles on a Rough Surface in Turbulent Flow [Volume 15, Issue 3, 2002, Pages 299-310]
-
Shamsabad Farahani, S. S.
Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force [Volume 30, Issue 4, 2017, Pages 500-506]
-
Shamsaei, M.
An Analysis to Wealth Distribution Based on Sugarscape Model in an Artificial Society [Volume 20, Issue 3, 2007, Pages 211-224]
-
Shamsaldeen, H. A.
Evaluation of Steel Fiber Reinforced Geopolymer Concrete Made of Recycled Materials [Volume 35, Issue 10, 2022, Pages 2018-2026]
-
Shamshiri, F.
Fuzzy Dynamic Modeling for Export Consortia in Small and Medium-Sized Enterprises [Volume 37, Issue 7, 2024, Pages 1422-1442]
-
Shamsi-Nejad, M. A.
Performance Analysis of a Novel Three-phase Axial Flux Switching Permanent Magnet Generator with Overlapping Concentrated Winding [Volume 32, Issue 2, 2019, Pages 286-295]
-
Shamsi-Sarband, A.
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Shams- khoramabadi, G.
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution [Volume 30, Issue 5, 2017, Pages 684-690]
-
Shams Nateri, M.
The Effect of Material Properties on Sensitivity of the Microelectromechanical Systems Piezoelectric Hydrophone [Volume 30, Issue 12, 2017, Pages 1848-1855]
-
Shams Nateri, Mojtaba
Design of Novel High Sensitive MEMS Capacitive Fingerprint Sensor [Volume 25, Issue 3, 2012, Pages 167-174]
-
Shams Nateri, Mojtaba
Modeling of capacitance and sensitivity of a MEMS pressure sensor [Volume 26, Issue 11, 2013, Pages 1331-1336]
-
Shams-Nateri, A.
Color Matching of Blends Prepared From Black and White Fibers by Neural Networks (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 105-108]
-
Shanechi, H. M.
Transmission Planning in Deregulated Environments [Volume 15, Issue 3, 2002, Pages 245-255]
-
Shanechi, M.
Three New Systematic Approaches for Computing Heffron-Phillips Multi-Machine Model Coefficients (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 43-52]
-
Shanmugam, J.
Coded Thermal Wave Imaging based Defect Detection in Composites using Neural Networks [Volume 35, Issue 1, 2022, Pages 93-101]
-
Shannon, G.
Transient Minimization Within Static Var Compensated Distribution Systems [Volume 6, Issue 2, 1993, Pages 87-94]
-
Shansherov, Aleksandr Vladimirovich
Evaluation of strength properties of cement containing NaCl in mixing water for cementing wells in halite strata [(Articles in Press)]
-
Shantveerayya, K.
Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
-
Sharafeddin, R.
Mathematical Model for Estimation of Return to Scale in Four-Level Green Supply Chain by using Data Envelopment Analysis [Volume 37, Issue 4, 2024, Pages 608-624]
-
Sharafi, P.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Sharafi, S.
Co-TiO2 Nanoparticles as the Reinforcement for Fe Soft Magnetic Composites with Enhanced Mechanical and Magnetic Properties via Pulse Electrodeposition [Volume 33, Issue 10, 2020, Pages 2030-2038]
-
Sharafi Miyab, Mehdi
Using Dynamic Thermal Rating and Energy Storage Systems Technologies Simultaneously for Optimal Integration and Utilization of Renewable Energy Sources [Volume 33, Issue 1, 2020, Pages 92-104]
-
Sharafkhani, N.
Study of Volumetric Flow Rate of a Micropump Using a Non-classical Elasticity Theory [Volume 31, Issue 6, 2018, Pages 986-996]
-
Sharanya, A.G.
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Shariatzadeh, S. M. R.
Nanostructured α-Fe2O3: Solvothermal Synthesis, Characterization, and Effect of Synthesis Parameters on Structural Properties [Volume 35, Issue 6, 2022, Pages 1186-1192]
-
Sharif, M. A.
Digital Communication Based on Image Security using Grasshopper Optimization and Chaotic Map [Volume 35, Issue 10, 2022, Pages 1981-1988]
-
Sharifi, D.
Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
-
Sharifi, H.
Biodegradation of Polychlorinated Biphenyls by and Isolated from Contaminated Soil [Volume 32, Issue 5, 2019, Pages 628-633]
-
Sharifi, H.
Fouling Performance of A Horizontal Corrugated Tube due to Air Injection [Volume 35, Issue 5, 2022, Pages 1074-1081]
-
Sharifi, Mani
Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
-
Sharifi, MohammadAli
Design of IIR Digital Filter using Modified Chaotic Orthogonal Imperialist Competitive Algorithm (RESEARCH NOTE) [Volume 27, Issue 7, 2014, Pages 1033-1040]
-
Sharifi, N.
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Sharifi, S.
Impact of High Strength Rebars on Seismic Behavior of Lightly Reinforced Boundary Elements [Volume 33, Issue 6, 2020, Pages 1094-1104]
-
Sharifi, Z.
Sonocatalytic Degradation of p-Chlorophenol by Nanoscale Zero-valent Copper Activated Persulfate under Ultrasonic Irradiation in Aqueous Solutions [Volume 33, Issue 6, 2020, Pages 1061-1069]
-
SHARIFI, MJ
Semiconductor Device Simulation by a New Method of Solving Poisson, Laplace and Schrodinger Equations (RESEARCH NOTE) [Volume 13, Issue 1, 2000, Pages 89-94]
-
Sharifi Hamadani, Bahman
The Performance of an Hexahedron C* Element in Finite Element Analysis [Volume 26, Issue 10, 2013, Pages 1191-1202]
-
Sharifin, M. B. B.
Sensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives [Volume 31, Issue 9, 2018, Pages 1536-1545]
-
Sharifi Pajaie, Hassan
Ultrasonic and Microwave Pretreatment for Hydrothermal Synthesis of Nanosized SAPO-34 and Their Catalytic Performance in MTO Reaction (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 330-337]
-
Sharifi Tashnizi, E
A 3D Numerical and Empirical Study on the Effects of Injection Pressure and Temperature on the Quality of Produced Mold [Volume 31, Issue 3, 2018, Pages 487-494]
-
Sharifi Tehrani, Omid
Real Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology [Volume 26, Issue 11, 2013, Pages 1347-1356]
-
Sharifov, A. R.
Investigation of Barium Sulfate Precipitation and Prevention Using Different Scale Inhibitors under Reservoir Conditions [Volume 31, Issue 10, 2018, Pages 1796-1802]
-
Sharifpour, Amir
Analysis of Resistance Spot Welding Process Parameters Effect on the Weld Quality of Three-steel Sheets Used in Automotive Industry: Experimental and Finite Element Simulation [Volume 33, Issue 1, 2020, Pages 148-157]
-
Sharifyazdi, M.
Service Level Based Capacity Rationing Procedure for Make-To-Order Manufacturing Systems [Volume 20, Issue 1, 2007, Pages 1-16]
-
Sharifzadeh, H.
An Enhanced McCormick Envelopes to Represent Kron's Loss Formula [Volume 36, Issue 3, 2023, Pages 585-593]
-
Sharifzadeh, M.
Artificial Neural Network Approach for Modeling of Mercury Adsorption from Aqueous Solution by Sargassum Bevanom Algae (RESEARCH NOTE) [Volume 28, Issue 8, 2015, Pages 1124-1133]
-
Sharifzadeh, M.
Removal of Dimethyl Phthalate from Aqueous Solution by Synthetic Modified Nano Zeolite Using Cu2O Nanoparticles [Volume 29, Issue 9, 2016, Pages 1198-1207]
-
Sharifzadeh, Mehdi
Parleda: a Library for Parallel Processing in Computational Geometry Applications [Volume 16, Issue 2, 2003, Pages 123-132]
-
Sharifzadeh, S.
Statistical Background Modeling Based on Velocity and Orientation of Moving Objects [Volume 21, Issue 1, 2008, Pages 39-54]
-
Sharifzadeh Baei, M.
Plant-Based Calcium Fructoborate as Boron-Carrying Nanoparticles for Neutron Cancer Therapy [Volume 32, Issue 4, 2019, Pages 460-466]
-
Shariyat, M.
Experimental and Finite Element Studies on Free Vibration of Automotive Steering Knuckle [Volume 30, Issue 11, 2017, Pages 1776-1783]
-
Sharma, G. C.
Diffusion Process for Multi - Repairmen Machining System with Spares Aand Balking [Volume 15, Issue 1, 2002, Pages 49-56]
-
Sharma, G. C.
G G r Machine Repair Problem with Spares and Additional Repairman (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 57-62]
-
Sharma, G. C.
Maintenance Cost Analysis for Replacement Model with Perfect Minimal Repair [Volume 15, Issue 2, 2002, Pages 161-168]
-
Sharma, G. C.
M M m K Queue With Additional Servers and Discouragement (RESEARCH NOTE) [Volume 15, Issue 4, 2002, Pages 349-354]
-
Sharma, G. C.
Performance Prediction of a Flexible Manufacturing System [Volume 15, Issue 4, 2002, Pages 355-364]
-
Sharma, G. C.
Performance Modeling of Machining System with Mixed Standby Components Balking and Reneging [Volume 17, Issue 2, 2004, Pages 169-180]
-
Sharma, G. C.
N-Policy for M/G/1 Machine Repair Model with Mixed Standby Components, Degraded Failure and Bernoulli Feedback [Volume 17, Issue 3, 2004, Pages 279-288]
-
Sharma, G. C.
State Dependent M/M/C/K/N Machining System with Mixed Spares and Removable Repairmen [Volume 18, Issue 1, 2005, Pages 21-28]
-
Sharma, G. C.
Controllable Multi-Server Queue with Balking (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 263-271]
-
Sharma, G. C.
Transmission Dynamics of Malaria in Human Host: a Neuro-Fuzzy Approach [Volume 19, Issue 1, 2006, Pages 35-48]
-
Sharma, G. C.
Diffusion Process for GGR Machining System with Spares, Balking and Reneging (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 49-54]
-
Sharma, G. C.
Probability Model of Decision Making for Successful Transplantation of Non-Cadaveric Organs (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 87-95]
-
Sharma, G. C.
Economic Production Quantity Models with Shortage, Price and Stock-Dependent Demand for Deteriorating Items [Volume 20, Issue 2, 2007, Pages 159-168]
-
Sharma, G. C.
Transient Analysis of M/M/R Machining System with Mixed Standbys, Switching Failures, Balking, Reneging and Additional Removable Repairmen [Volume 20, Issue 2, 2007, Pages 169-182]
-
Sharma, G. C.
Reliability Analysis of K-Out-Of N: G Machining Systems with Mixed Spares and Multiple Modes of Failure (TECHNICAL NOTE) [Volume 20, Issue 3, 2007, Pages 243-250]
-
Sharma, G. C.
Mathematical Modeling of the Temperature-Dependent Growth of Living Systems [Volume 21, Issue 4, 2008, Pages 319-328]
-
Sharma, G. C.
Mathematical modeling of blood flow in a stenosed artery under MHD effect through porous medium [Volume 23, Issue 3, 2010, Pages 243-252]
-
Sharma, G. C.
Some Perspectives of Machine Repair Problems [Volume 23, Issue 3, 2010, Pages 253-268]
-
Sharma, G. C.
Stability and Numerical Analysis of Malaria- mTB- HIV/AIDS Co-infection (TECHNICAL NOTE) [Volume 26, Issue 7, 2013, Pages 729-742]
-
Sharma, G.C.
A Mathematical Model for Blood Flow Through Narrow Vessels with Mild-Stenosis (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 99-106]
-
Sharma, G.C.
Mathematical Analysis of MHD Flow of Blood in Very Narrow Capillaries (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 307-315]
-
Sharma, K.G.
Modeling of Unreinforced and Reinforced Pavement Composite Material Using HISS Model (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 13-22]
-
Sharma, K. K.
Investigation of Dielectric Properties of Ni/n-TiO2/p-Si/Al Heterojunction in Wide Range of Temperature and Voltage [Volume 35, Issue 4, 2022, Pages 698-705]
-
Sharma, KV
Heat Transfer Coefficients Investigation for TiO2 Based Nanofluids [Volume 32, Issue 10, 2019, Pages 1491-1496]
-
Sharma, Pankaj
Controllable Multi-Server Queue with Balking (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 263-271]
-
Sharma, Pankaj
Unreliable Server Mx/G/1 Queue with Loss-delay, Balking and Second Optional Service [Volume 30, Issue 2, 2017, Pages 243-252]
-
Sharma, Pramod C.
Optimization Capabilities of LMS and SMI Algorithm for Smart Antenna Systems (RESEARCH NOTE) [Volume 26, Issue 11, 2013, Pages 1393-1400]
-
Sharma, R.
On Finite Queue with Two Types of Failures and Preemptive Priority (RESEARCH NOTE) [Volume 14, Issue 1, 2001, Pages 65-68]
-
Sharma, R.
Impact Analysis of Variation in Geometrical Features on Intrinsic Characteristics of Capacitive Micro-machined Ultrasonic Transducers [Volume 31, Issue 11, 2018, Pages 1846-1851]
-
Sharma, R. V.
Mathematical Investigation of Soil Temperature Variation for Geothermal Applications [Volume 30, Issue 10, 2017, Pages 1609-1614]
-
Sharma, Sanjeev Kumar
Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling [Volume 28, Issue 8, 2015, Pages 1241-1250]
-
Sharma, S. Kant
Comparison of Permeability and Drying Shrinkage of Self Compacting Concrete Admixed with Wollastonite Micro Fiber and Flyash [Volume 30, Issue 11, 2017, Pages 1681-1690]
-
Sharma, Sudheer
Transmission Dynamics of Malaria in Human Host: a Neuro-Fuzzy Approach [Volume 19, Issue 1, 2006, Pages 35-48]
-
Sharma, Sudheer
Mathematical Modeling of the Temperature-Dependent Growth of Living Systems [Volume 21, Issue 4, 2008, Pages 319-328]
-
Sharma, Sudheer
A Mathematical Model for Blood Flow Through Narrow Vessels with Mild-Stenosis (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 99-106]
-
Sharma, V
Predicting Force in Single Point Incremental Forming by Using Artificial Neural Network [Volume 31, Issue 1, 2018, Pages 88-95]
-
Sharma, Yateesh
High-performance and Low-power Clock Branch Sharing Pseudo-NMOS Level Converting Flip-flop [Volume 26, Issue 3, 2013, Pages 315-322]
-
SHARMA, RAVI KUMAR
Assessment of Mechanical Properties of Concrete Containing Granite Slurry Waste (TECHNICAL NOTE) [Volume 29, Issue 5, 2016, Pages 599-605]
-
SHARMA, SACHIN
Assessment of Mechanical Properties of Concrete Containing Granite Slurry Waste (TECHNICAL NOTE) [Volume 29, Issue 5, 2016, Pages 599-605]
-
Shasfand, S.
Functional Model of Integrated Maintenance in Petrochemical Industries [Volume 37, Issue 6, 2024, Pages 1106-1117]
-
Shateri, A.
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces [Volume 35, Issue 12, 2022, Pages 2291-2296]
-
Shateri, A.
A Novel Fractional Analytical Technique for the Time-space Fractional Equations Appearing in Oil Pollution [Volume 35, Issue 12, 2022, Pages 2386-2394]
-
Shateri, A.
A Comparative Study of Hybrid Analytical and Laplace Transform Approaches for Solving Partial Differential Equations in Python [Volume 37, Issue 2, 2024, Pages 352-364]
-
Shavandi, M.
Face Recognition in Thermal Images based on Sparse Classifier [Volume 32, Issue 1, 2019, Pages 78-84]
-
Shawkat Mizzourib, Nashwan
Decolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1582-1586]
-
Shayan, M.
Attitude Estimation of Nano-satellite according to Navigation Sensors using of Combination Method (TECHNICAL NOTE) [Volume 28, Issue 7, 2015, Pages 964-969]
-
Shayanfar, H. A.
Rcd Rules and Power Systems Observability [Volume 9, Issue 3, 1996, Pages 159-168]
-
Shayanfar, H. A.
Application of ANN Technique for Interconnected Power System Load Frequency Control (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 247-254]
-
Shayegh, M. R.
Formation of Lanthanum Hydroxide Nanostructures: Effect of NaOH and KOH Solvents [Volume 21, Issue 2, 2008, Pages 169-176]
-
Shayeghi, H.
Application of ANN Technique for Interconnected Power System Load Frequency Control (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 247-254]
-
Shayestehkhah, H
Application of an Additive Self-tuning Controller for Static Synchronous Series Compensator for Damping of Sub-synchronous Resonance Oscillations [Volume 31, Issue 4, 2018, Pages 564-573]
-
Shedthi B., S.
Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
-
Sheel, Tarun Kumar
Acceleration of Bluff Body Calculation Using Mdgrape-2 [Volume 23, Issue 2, 2010, Pages 169-176]
-
Sheel, T.K.
A New Technique for the Calculation of Colliding Vortex Rings [Volume 22, Issue 2, 2009, Pages 205-212]
-
Sheibani, S.
Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
-
Sheibani, S.
Full Characterization of Sarcheshmeh and Khatoon-Abad Copper Anode Slimes: Characterization Impact on the Decopperization Operation [Volume 36, Issue 5, 2023, Pages 934-945]
-
Sheidaii, Mohammad Reza
Comparison of the Progressive Collapse Resistance of Seismically Designed Steel Shear Wall Frames And Special Steel Moment Frames [Volume 28, Issue 6, 2015, Pages 871-879]
-
Sheidaii, Mohammad Reza
Introduction of Air Cushion to Reduce Seismic Demand in Cylindrical Water Storage Tanks [Volume 29, Issue 4, 2016, Pages 464-472]
-
Sheidaii, Mohammad Reza
Experimental Investigation on Cyclic Behavior of Butterfly-shaped Links Steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1559-1569]
-
Sheidaii, M. R.
Experimental and Numerical Study of Perforated Steel Plate Shear Panels [Volume 33, Issue 4, 2020, Pages 520-529]
-
Sheikh, K.
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
-
Sheikh, Zohreh
Comparison of Three Soft Computing Methods in Estimating Apparent Shear Stress in Compound Channels [Volume 29, Issue 9, 2016, Pages 1219-1226]
-
Sheikhi, Mohammad morad
Experimental Analysis of Effects of Ultrasonic Welding on Weld Strength of Polypropylene Composite Samples [Volume 28, Issue 3, 2015, Pages 447-453]
-
Sheikhi, S.
An Effective Model for SMS Spam Detection Using Content-based Features and Averaged Neural Network [Volume 33, Issue 2, 2020, Pages 221-228]
-
Sheikholeslami, Abdolreza
OPTIMAL SCHEDULING OF MULTI VECTOR ENERGY NETWORKS CONSIDERING RESILIENCY IMPROVEMENT [(Articles in Press)]
-
Sheikholeslami, Mohsen
Lattice Boltzmann Simulation of Nanofluids Natural Convection Heat Transfer in Concentric Annulus (TECHNICAL NOTE) [Volume 26, Issue 8, 2013, Pages 895-904]
-
Sheikholharam Mashhadi, P.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Sheikhrabori, R.
Change Point Estimation of the Stationary State in Auto Regressive Moving Average Models, Using Maximum Likelihood Estimation and Singular Value Decomposition-based Filtering [Volume 32, Issue 5, 2019, Pages 726-736]
-
Sheikh Sajadieh, Mohsen
An Iterative Decision Rule to minimize cost of Acceptance Sampling Plan in Machine Replacement Problem [Volume 27, Issue 7, 2014, Pages 1099-1106]
-
Sheikhzadeh, G. A.
The Overall Heat Transfer Characteristics of a Double Pipe Heat Exchanger: Comparison of Experimental Data with Predictions of Standard Correlations [Volume 15, Issue 4, 2002, Pages 395-406]
-
Sheikhzadeh, G. A.
Numerical Investigation of Geometric Parameters Effects on Heat Transfer Enhancement in a Manifold Microchannel Heat Sink [Volume 35, Issue 5, 2022, Pages 943-953]
-
Sheikhzadeh, Ghanbar Ali
The Effects of an Imposed Magnetic Field on Natural Convection in a Tilted Cavity with Partially Active Vertical Walls:Numerical Approach [Volume 23, Issue 1, 2010, Pages 65-78]
-
Sheikhzadeh, Ghanbar Ali
Numerical Study of Natural Convection in an Inclined Cavity with Partially Active Side Walls Filled with Cu-water Nanofluid [Volume 24, Issue 3, 2011, Pages 279-292]
-
Sheikhzadeh, Ghanbar Ali
Convective Heat Transfer from a Heated Rotating Disk at Arbitrary Inclination Angle in Laminar Flow [Volume 26, Issue 8, 2013, Pages 865-874]
-
Sheikhzadeh, Ghanbar Ali
The Effect of Variable Properties on Rayleigh-Benard Convection in an Enclosure Filled with Al2O3-EG-Water Nanofluid [Volume 26, Issue 12, 2013, Pages 1411-1422]
-
Sheikhzadeh, Ghanbar Ali
Fluid Dynamics in a Copper Converter: an Investigation on Mixing Phenomena in an Experimental Model [Volume 29, Issue 1, 2016, Pages 118-126]
-
Sheikhzad Saravani, Mandana
Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers [Volume 28, Issue 9, 2015, Pages 1351-1358]
-
Shekhar, C.
State Dependent Multi channel Queuing System with Ordered Entry [Volume 15, Issue 3, 2002, Pages 275-286]
-
Shen, J.
Vibration and Noise Reduction Optimization Design of Mine Chute with Foam Aluminum Laminated Structure [Volume 33, Issue 8, 2020, Pages 1668-1676]
-
Shen, Jian
Least Squares Support Vector Machine for Constitutive Modeling of Clay [Volume 28, Issue 11, 2015, Pages 1571-1578]
-
Shen, Zhonghua
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE) [Volume 26, Issue 9, 2013, Pages 975-984]
-
Sherafatnia, Khalil
Analytic Approach to Free Vibration and Buckling Analysis of Functionally Graded Beams with Edge Cracks using four Engineering Beam Theories [Volume 27, Issue 6, 2014, Pages 979-990]
-
Sherbaf Moghaddam, Anahita
Multi-objective Economic-statistical Design of Cumulative Count of Conforming Control Chart [Volume 27, Issue 10, 2014, Pages 1591-1600]
-
Shetty, S.
Cross-modal Deep Learning-based Clinical Recommendation System for Radiology Report Generation from Chest X-rays [Volume 36, Issue 8, 2023, Pages 1569-1577]
-
Shetty, V.
Implementation of Chatbot that Predicts an Illness Dynamically using Machine Learning Techniques [Volume 37, Issue 2, 2024, Pages 312-322]
-
Shi, J.
Heat Transfer Performance Analysis and Optimization of Exhaust Gas Recirculation Cooler with Different Structural Characteristics [Volume 33, Issue 10, 2020, Pages 2105-2112]
-
Shi, L.
Optimization of Operating Parameters of a Scroll Expander Based on Response Surface and NSGA II [Volume 37, Issue 1, 2024, Pages 136-150]
-
Shi, Y. C.
Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
-
Shibanov, D.
Extraction of Inclined Exit Ledges in Coal Mines in Presence of Mobile Crushing and Conveyor Complexes [Volume 37, Issue 8, 2024, Pages 1658-1666]
-
Shibanov, D. A.
Сomprehensive Assessment Production Efficiency of Electric Rope Shovel through Operator Qualification Criteria [Volume 37, Issue 7, 2024, Pages 1231-1238]
-
Shidpoor, R.
Role of Praseodymium Addition in the Microstructure and Magnetic Properties of ZnCo Ferrite Nanopowders: Positive or Negative? [Volume 35, Issue 1, 2022, Pages 14-20]
-
Shieddieque, Apang Djafar
Optimization of In-Situ Synthesis Process Parameters of LiFePO4/C-MAF-5 Surface Modification for Conductivity Improvement of LIB Cathode Material by Response Surface Method [(Articles in Press)]
-
Shigidi, I.
Waste Engine Oil Remediation Using Low Cost Natural Clay Absorbent Material [Volume 33, Issue 2, 2020, Pages 178-185]
-
Shijing, D.
Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
-
Shimizu, T.
a Simplified Model of Distributed Parameter Systems [Volume 6, Issue 2, 1993, Pages 65-78]
-
Shirani, Ebrahim
Simulation of Low Reynolds Number Isotropic Turbulence Including the Passive Scalar [Volume 1, Issue 2, 1988, Pages 139-148]
-
Shirani, Ebrahim
Adaptation of Structured Grid for Supersonic and Transonic Flows [Volume 14, Issue 4, 2001, Pages 385-392]
-
Shirani, Ebrahim
Effects of Directional Subdividing on adaptive Grid-Embedding (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 71-78]
-
Shiravi, A.
Static Coil Design Considerations for the Magnetic Resonance Imaging [Volume 32, Issue 3, 2019, Pages 393-399]
-
Shiravi, M.
Static Coil Design Considerations for the Magnetic Resonance Imaging [Volume 32, Issue 3, 2019, Pages 393-399]
-
Shirazi, H. H .A.
Modeling of Texture and Color Froth Characteristics for Evaluation of Flotation Performance in Sarcheshmeh Copper Pilot Plant, Using Image Analysis and Neural Networks [Volume 17, Issue 2, 2004, Pages 121-130]
-
Shirazi, M.
Effect of Surface Roughness on Brinell Hardness and Load-Displacement Curves using a Macro Indentation [Volume 36, Issue 5, 2023, Pages 914-924]
-
Shirazi, M.A.
Thermal -Hidraolyc Study of Trr Core in Fuel Conversion Frome Highly Enriched Uranium to Low Enriched Uranium Fuel (RESEARCH NOTES) [Volume 9, Issue 2, 1996, Pages 45-52]
-
Shirazi, S. G.
Ballistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2 [Volume 30, Issue 4, 2017, Pages 516-522]
-
Shirazi-Adl, A.
On the Displacement-Stress Continuous Finite Elements [Volume 6, Issue 4, 1993, Pages 169-178]
-
Shirdhonkar, M. S.
An Improved Fingerprint-based Document Image Retrieval using Multi-resolution Histogram of Oriented Gradient Features [Volume 35, Issue 4, 2022, Pages 750-759]
-
Shirgahi, Hossein
Energy Aware Strategies for Scheduling Precedence Constrained Parallel Tasks in DVFS-enabled Cloud Datacenter [(Articles in Press)]
-
Shiri, N.
In-depth Investigation of Project Planning and Control Software Package Application in the Construction Industry of Iran [Volume 33, Issue 10, 2020, Pages 1817-1825]
-
Shirinabadi, R.
Direct and Indirect Tensile Behavior of Cement-Zeolite-amended Sand Reinforced with Kenaf Fiber [Volume 37, Issue 5, 2024, Pages 818-832]
-
Shirkhani, M.
Optimal Capacity and Location for Renewable-based Microgrids Considering Economic Planning in Distribution Networks [Volume 36, Issue 12, 2023, Pages 2175-2183]
-
Shirkhani, M.
Application of Cluster Technique for Loss Estimation in Distribution Feeders via Limited Measurement Data [Volume 37, Issue 8, 2024, Pages 1556-1568]
-
Shirkhani, Reza
An ANFIS-based Approach for Predicting the Manning Roughness Coefficient in Alluvial Channels at the Bank-full Stage [Volume 26, Issue 2, 2013, Pages 177-186]
-
Shirvani, Ahmadreza
Experimental Investigation of Flooding and Drop Size in a Kuhni Extraction Column [Volume 29, Issue 3, 2016, Pages 288-296]
-
Shirvani, Mansour
a Simplified Model of Distributed Parameter Systems [Volume 6, Issue 2, 1993, Pages 65-78]
-
Shirvani, Mansour
Heuristic Process Model Simplification in Frequency Response Domain [Volume 17, Issue 1, 2004, Pages 19-39]
-
Shirvani, Mansour
Sealing of Rotary Drums for Operation Under Pressurized Conditions [Volume 19, Issue 1, 2006, Pages 1-12]
-
Shirvani, Mansour
Material Flow in Rotary Drums [Volume 27, Issue 6, 2014, Pages 829-838]
-
Shishulin, V. V.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Sh. J. Al-Zuheriy, A.
Use of Waste Materials for Sustainable Development of Rigid Pavement [Volume 36, Issue 10, 2023, Pages 1919-1931]
-
Shlash, Kais
Boundary Element Analysis of a Lined Tunnel Problem [Volume 25, Issue 2, 2012, Pages 89-98]
-
Shmasi-Nejad, M. A.
A New Multilevel Inverter Based on Harvest of Unused Energies for Photovoltaic Applications [Volume 35, Issue 12, 2022, Pages 2377-2385]
-
Shmasi-Nejad, M. A.
A New Generalized Step-up Multilevel Inverter Topology Based on Combined T-type and Cross Capacitor Modules [Volume 36, Issue 7, 2023, Pages 1354-1368]
-
Shoaei, O.
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Shoeibi, N.
An Automatic Optic Disk Segmentation Approach from Retina of Neonates via Attention Based Deep Network [Volume 35, Issue 4, 2022, Pages 715-724]
-
Shoja, E.
An Investigation of the Seismic Interaction of Surface Foundations and Underground Cavities Using Finite Element Method [Volume 33, Issue 9, 2020, Pages 1721-1730]
-
Shojaee, S.
Numerical Simulation of Seepage Flow through Dam Foundation Using Smooth Particle Hydrodynamics Method (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 484-488]
-
Shojaeefard, Mohammad Hasan
Low-Carbon Steel Sheet Asymmetric Single-Point Incremental Forming: Analysis and Optimization of the Surface Roughness [Volume 32, Issue 6, 2019, Pages 866-871]
-
Shojaeezadeh, Ehsan
Experimental Investigation of Thermal Performance in an Advanced Solar Collector with Spiral Tube [Volume 27, Issue 7, 2014, Pages 1149-1154]
-
Shojaefard, M. H.
Effect of Contact Pressure and Frequency on Contact Heat Transfer Between Exhaust Valve and its Seat [Volume 21, Issue 4, 2008, Pages 401-408]
-
Shojaefard, M. H.
Mathematical Modeling of Potential Flow over a Rotating Cylinder (RESEARCH NOTE) [Volume 24, Issue 1, 2011, Pages 55-63]
-
Shojaefard, M. H.
Experimental and Numerical Flow Investigation of Intake Manifold and Multi Criteria Decision Making on 3-cylinder SI Engine using Technique for Order of Preference by Similarity to Ideal Solution (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1663-1670]
-
Shojaefard, M. H.
Intake Manifold Flow Assessment on a 3-cylinder Natural Aspirated Downsized Engine Using CFD and GT-SUITE [Volume 29, Issue 2, 2016, Pages 255-263]
-
Shojaei, A.
Optical Efficiency of Linear Fresnel Reflectors in Fixed, Variable and Optimal Distance between Mirrors: Theoretical and Experimental Studies [Volume 37, Issue 2, 2024, Pages 283-297]
-
Shojaei, M.R.
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Shojaei, M.R.
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Shojaeifar, Hamid
Performance Evaluation of Curved-TADAS Damper on Seismic Response of Moment Resisting Steel Frame [Volume 33, Issue 1, 2020, Pages 55-67]
-
Shojaie, A. A.
Reduction of Insolvency Risk and Total Costs in Banking Sector using Partners Selection Approach with Genetic Algorithm and Multilayer Perceptron Neural Network [Volume 37, Issue 8, 2024, Pages 1667-1690]
-
Shojaie-Bahaabad, M.
Effect of Graphite Addition on the Microstructure, Mechanical Properties and Oxidation Resistance of HfB2-SiC Composites Prepared by the SPS Method [Volume 35, Issue 10, 2022, Pages 1867-1876]
-
Shojaie-Navokh, M
Economic-statistical Design of NP Control Chart with Variable Sample Size and Sampling Interval [Volume 31, Issue 4, 2018, Pages 629-639]
-
Shojaosadati, S.A.
Bioconversion and Enzymatic Activities of Neurospora Sitophila Grown Under Solid State and Submerged Fermentation on Sago Hamps (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 65-68]
-
Shokati, Naser
Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints [Volume 28, Issue 4, 2015, Pages 618-626]
-
Shokohmand, H.
A Numerical Modeling of a Variable Conductance Thermosyphon by Use of a Binary Mixture [Volume 15, Issue 4, 2002, Pages 373-382]
-
Shokohmand, H.
Numerical Study of Flow and Heat Transfer in a Square Driven Cavity [Volume 17, Issue 3, 2004, Pages 301-317]
-
Shokoohi Rad, A.
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Shokoufi, K.
Pareto-based Multi-criteria Evolutionary Algorithm for Parallel Machines Scheduling Problem with Sequence-dependent Setup Times [Volume 30, Issue 12, 2017, Pages 1863-1869]
-
Shokr, I.
A Common Weight Data Envelopment Analysis Approach for Material Selection [Volume 28, Issue 6, 2015, Pages 913-921]
-
Shokrgozar, Mohammad Ali
Effect of Micellization pH on Properties of Sphere-like Mesoporous Hydroxyappatite [Volume 28, Issue 7, 2015, Pages 1068-1073]
-
Shokri, A.
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Shokri, Aref
Using Experimental Design to Optimize the Photo-degradation of P-Nitro Toluene by Nano-TiO2 in Synthetic Wastewater [Volume 32, Issue 8, 2019, Pages 1074-1081]
-
Shokri, V
Comparison of the hyperbolic range of two-fluid models on two-phase gas -liquid flows [Volume 31, Issue 1, 2018, Pages 144-156]
-
Shokrollahi, A.
Computation Optical Flow Using Pipeline Architecture [Volume 11, Issue 4, 1998, Pages 181-190]
-
Shokuhfar, Ali
Solidification Phenomena and Properties of Some Cast Tool Steels [Volume 3, Issue 1, 1990, Pages 57-62]
-
Shokuhi Rad, A
Interpreting the CO2 adsorption on functionalized organic group of IRMOF-1: A B3LYP DFT based study [Volume 31, Issue 9, 2018, Pages 1473-1479]
-
Shooshpasha, I.
Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE) [Volume 27, Issue 2, 2014, Pages 307-314]
-
Shooshpasha, I.
Optimum Bacteria Suspension Volume for Stabilizing Silty Sand Soils by Sporosarcina pasteurii Bacteria [Volume 35, Issue 10, 2022, Pages 1820-1829]
-
Shooshtari, A.
Proposed Dynamic Soil Pressure Diagram On Rigid Walls. [Volume 21, Issue 3, 2008, Pages 213-224]
-
Shorgashti, Azadeh
The Study of Organic Removal Efficiency and Membrane Fouling in a Submerged Membrane Bioreactor Treating Vegetable Oil Wastewater [Volume 29, Issue 12, 2016, Pages 1642-1649]
-
Short, M.J.
Real Time Dynamic Simulation of Power System Using Multiple Microcomputers [Volume 3, Issue 1, 1990, Pages 15-22]
-
Showkati, Hossein
Field Study and Evaluation of Buckling Behavior of Cylindrical Steel Tanks with Geometric Imperfections under Uniform External Pressure [Volume 30, Issue 9, 2017, Pages 1309-1318]
-
Shreyas, D. S.
Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation [Volume 35, Issue 11, 2022, Pages 2247-2255]
-
Shrivastav, R.K.
A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
-
Shuaib, N. A.
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Shukla, A
Load Balancing Approaches for Web Servers: A Survey of Recent Trends [Volume 31, Issue 2, 2018, Pages 263-269]
-
Shukla, R. K.
Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling [Volume 28, Issue 8, 2015, Pages 1241-1250]
-
Shukur, M. M.
The Effect of Transition Metals Incorporation on the Structural and Magnetic Properties of Magnesium Oxide Nanoparticles [Volume 33, Issue 4, 2020, Pages 647-656]
-
Shwetha, K. G.
Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
-
Shwetha, K. G.
Performance Evaluation of Hollow Concrete Blocks Made with Sawdust Replacement of Sand: Case Study of Adama, Ethiopia [Volume 35, Issue 6, 2022, Pages 1119-1126]
-
Shyam Kumar, M. B.
Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting [Volume 30, Issue 10, 2017, Pages 1573-1582]
-
Shyam Kumar, M. B.
Experimental and Numerical Investigation of Air Temperature Distribution inside a Car under Solar Load Condition [Volume 32, Issue 7, 2019, Pages 1031-1039]
-
Siadatan, A.
Design and Construction of a Sensorless Circuit for Brushless DC Motor using Third Harmonic back Electromotive Force [Volume 30, Issue 4, 2017, Pages 500-506]
-
Siadatan, Alireza
Comprehensive Design Procedure and Manufacturing of Permanent Magnet Assisted Synchronous Reluctance Motor [Volume 32, Issue 9, 2019, Pages 1299-1305]
-
Siadatan, A.R.
A Novel Two Phase Hybrid Switched Reluctance Motor/Field-Assisted Generator: Concept, Simulation, and Experimental Confirmation [Volume 22, Issue 4, 2009, Pages 357-368]
-
Siadatan, A.R.
Design, Construction and Comparison of a Sensorless Driver Circuit for Switched Reluctance Motor [Volume 27, Issue 1, 2014, Pages 143-156]
-
Siadati, H.
Electrodeposited Co-Pi Catalyst on α-Fe2O3 Photoanode for Water-Splitting Applications [Volume 31, Issue 12, 2018, Pages 2085-2091]
-
Siahbalaee, J.
A Novel 19-Level Boost Type Switched-capacitor Inverter with Two DC Sources and Reduced Semiconductor Devices [Volume 36, Issue 2, 2023, Pages 253-263]
-
Siahi, A.
An Adaptive Fuzzy Neural Network Model for Bankruptcy Prediction of Listed Companies on the Tehran Stock Exchange [Volume 30, Issue 12, 2017, Pages 1879-1884]
-
Siahkolah, B.
Effect of Solid-State on Load Distribution Transformer Tap-Changer on Power Quality Enhancement [Volume 17, Issue 2, 2004, Pages 141-154]
-
Siavash, A. S.
GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 135-143]
-
Siavoshnia, M.
Effect of Adsorbents on Resistance Parameters of Heavy Metal-contaminated Clayey Sand Soils [Volume 35, Issue 11, 2022, Pages 2139-2154]
-
Sibanda, M.
The Opportunities Afforded by Embedded Computer Systems for Monitoring and Control of Industrial Processes in Less-Industrialised Countries (TECHNICAL NOTE) [Volume 15, Issue 4, 2002, Pages 379-384]
-
Siddaiah, P.
Reference Satellite Strategic Methods to Improve Position Accuracy of Rover with Resolved Integer Ambiguities Using Linear Combination in DIRNSS System [Volume 33, Issue 11, 2020, Pages 2188-2194]
-
Siddeq, M. M.
Adaptive Polynomial Coding of Multi-base Hybrid Compression [Volume 36, Issue 2, 2023, Pages 236-252]
-
Siddharth, D.
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Siddique, U. M.
Heat Transfer Augmentation for Impingement of Steady Air Jet under Exponential Heat Flux Boundary Condition [Volume 37, Issue 5, 2024, Pages 920-930]
-
Sidibe, M. S.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Sihag, P.
Estimation of Punching Shear Capacity of Concrete Slabs Using Data Mining Techniques [Volume 32, Issue 7, 2019, Pages 908-914]
-
Sihombing, L. B.
Critical Success Factor Implementation of Land Value Capture on a Toll Road Assignment Scheme: SEM-PLS Approach [Volume 37, Issue 7, 2024, Pages 1317-1330]
-
Sijwal, G.
Lateral Load Carrying Capacity of Concrete-filled Cold-formed Steel Shear Wall [Volume 35, Issue 1, 2022, Pages 161-171]
-
Sikarwar, basant
Experimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling [Volume 28, Issue 8, 2015, Pages 1241-1250]
-
Sikarwar, basant
Towards an Analytical Model for Film Cooling Prediction using Integral Turbulent Boundary layer [Volume 29, Issue 4, 2016, Pages 554-562]
-
Sil, Arjun
Damage Assessment of Reinforced Concrete Buildings Considering Irregularities (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1388-1394]
-
Silani, Mohammad
Using Pattern Search Algorithm and Finite Element Method to Detect Rotor Cracks [Volume 22, Issue 2, 2009, Pages 195-204]
-
Sinaie, A
Numerical Investigation of Combined Radiation and Nutral Convention Heat Transfer in a Horizonal Annulus [Volume 12, Issue 4, 1999, Pages 259-270]
-
Sinaie, A.
Tomographic Determination of Temperature Distribution in Billets (RESEARCH NOTES) [Volume 11, Issue 4, 1998, Pages 219-228]
-
Sinaie, A.
on the Elastic Stability of Sleeve Stiffened Hollow Columns; Focusing on Determination of Optimal Design Curves (TECHNICAL NOTE) [Volume 12, Issue 3, 1999, Pages 195-203]
-
Sinaie, Sina
Calibration of Hardening Rules for Cyclic Plasticity [Volume 26, Issue 4, 2013, Pages 351-364]
-
Singh, Amit
MHD Flow of Blood through Radially Non-symmetric Stenosed Artery: a Hershcel-Bulkley Model (RESEARCH NOTE) [Volume 26, Issue 8, 2013, Pages 859-864]
-
Singh, Amit
A Numerical Analysis for the Effect of Slip Velocity and Stenosis Shape on Non-Newtonian Flow of Blood (TECHNICAL NOTE) [Volume 28, Issue 3, 2015, Pages 440-446]
-
Singh, Atar
Probability Model of Decision Making for Successful Transplantation of Non-Cadaveric Organs (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 87-95]
-
Singh, Atar
Mathematical Analysis of MHD Flow of Blood in Very Narrow Capillaries (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 307-315]
-
Singh, Atar
Stability and Numerical Analysis of Malaria- mTB- HIV/AIDS Co-infection (TECHNICAL NOTE) [Volume 26, Issue 7, 2013, Pages 729-742]
-
Singh, C. J.
A Finite Capacity Priority Queue with Discouragement [Volume 11, Issue 4, 1998, Pages 191-196]
-
Singh, C. J.
Reliability of Repairable Multicomponent Redundant System [Volume 13, Issue 4, 2000, Pages 17-22]
-
Singh, C. J.
Diffusion Process for Multi - Repairmen Machining System with Spares Aand Balking [Volume 15, Issue 1, 2002, Pages 49-56]
-
Singh, C. J.
G G r Machine Repair Problem with Spares and Additional Repairman (TECHNICAL NOTE) [Volume 15, Issue 1, 2002, Pages 57-62]
-
Singh, C. J.
The Approach of Convergence to Stationary State of Multi Server Queue with Balking (TECHNICAL NOTE) [Volume 20, Issue 1, 2007, Pages 27-34]
-
Singh, Dr.
Numerical Modeling of Two-Layered Micropolar Fluid Through an Normal and Stenosed Artery [Volume 24, Issue 2, 2011, Pages 177-187]
-
Singh, G
An Experimental Study of Nanofluids Operated Shell and Tube Heat Exchanger with Air Bubble Injection [Volume 31, Issue 1, 2018, Pages 136-143]
-
Singh, G.
An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1223-1230]
-
Singh, G.
Structure-property Interaction in Flux Assisted Tungsten Inert Gas Welding of Austenitic Stainless Steel [Volume 32, Issue 1, 2019, Pages 99-105]
-
Singh, H
Load Balancing Approaches for Web Servers: A Survey of Recent Trends [Volume 31, Issue 2, 2018, Pages 263-269]
-
Singh, H.
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Singh, J.
Viscosity Analysis of Water-based Copper Oxide Nanofluids [Volume 36, Issue 3, 2023, Pages 481-489]
-
Singh, Krishna Kumar
Determination of Principal Permeabilities in Two-Dimensional Fissured Rocks Using Permeability Circle (TECHNICAL NOTE) [Volume 17, Issue 4, 2004, Pages 357-362]
-
Singh, Krishna Kumar
A Computational Approach to the Flow of Walter’s Liquid B′ through Annulus of Coaxial Porous Circular Cylinders for High Suction Parameter (RESEARCH NOTE) [Volume 22, Issue 2, 2009, Pages 119-124]
-
Singh, Kulbir
Singular Value Decomposition based Steganography Technique for JPEG2000 Compressed Images [Volume 28, Issue 12, 2015, Pages 1720-1727]
-
Singh, M.
Design and Real Time Digital Simulator Implementation of a Takagi Sugeno Fuzzy Controller for Battery Management in Photovoltaic Energy System Application [Volume 35, Issue 12, 2022, Pages 2275-2282]
-
Singh, Manu Pratap
Estimation of Software Reliability by Sequential Testing with Simulated Annealing of Mean Field Approximation [Volume 19, Issue 1, 2006, Pages 35-44]
-
Singh, Manu Pratap
Handwritten Character Recognition using Modified Gradient Descent Technique of Neural Networks and Representation of Conjugate Descent for Training Patterns [Volume 22, Issue 2, 2009, Pages 145-158]
-
Singh, Manu Pratap
Estimation of Network Reliability for a Fully Connected Network with Unreliable Nodes and Unreliable Edges using Neuro Optimization [Volume 22, Issue 4, 2009, Pages 317-332]
-
Singh, N. K.
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Singh, N.
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Singh, Neetu
Transient Analysis of M/M/R Machining System with Mixed Standbys, Switching Failures, Balking, Reneging and Additional Removable Repairmen [Volume 20, Issue 2, 2007, Pages 169-182]
-
Singh, N.P.
High-performance and Low-power Clock Branch Sharing Pseudo-NMOS Level Converting Flip-flop [Volume 26, Issue 3, 2013, Pages 315-322]
-
Singh, P.
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Singh, P.
Human Disease Prediction using Machine Learning Techniques and Real-life Parameters [Volume 36, Issue 6, 2023, Pages 1092-1098]
-
Singh, R.
Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions [Volume 30, Issue 4, 2017, Pages 597-603]
-
Singh, R.
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys [Volume 33, Issue 5, 2020, Pages 861-869]
-
Singh, Ram
Mathematical modeling of blood flow in a stenosed artery under MHD effect through porous medium [Volume 23, Issue 3, 2010, Pages 243-252]
-
Singh, Robin
Damped Vibrations of Parabolic Tapered Non-homogeneous Infinite Rectangular Plate Resting on Elastic Foundation (RESEARCH NOTE) [Volume 28, Issue 7, 2015, Pages 1082-1089]
-
Singh, S
Flexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning [Volume 31, Issue 1, 2018, Pages 164-172]
-
Singh, S.
Mechanical Properties and Wear Behaviour of Stir Cast Aluminum Metal Matrix Composite: A Review [Volume 35, Issue 4, 2022, Pages 794-801]
-
Singh, S.
Potential Use of Fly Ash for Developing Angular-shaped Aggregate [Volume 36, Issue 6, 2023, Pages 1114-1120]
-
Singh, S.
Effect of Crushing Process Parameters on Quality of Fly Ash Aggregates Produced After Crushing High Strength Fly Ash Blocks: A Laboratory Investigation [Volume 37, Issue 3, 2024, Pages 511-519]
-
Singh, S. B.
Analysis of the Reliability of a Three-Component System with Two Repairmen [Volume 24, Issue 4, 2011, Pages 395-402]
-
Singh, S. B.
RELIABILITY MEASURES AND SENSITIVITY ANALYSIS OF A COMPLEX MATRIX SYSTEM INCLUDING POWER FAILURE [Volume 25, Issue 2, 2012, Pages 115-130]
-
Singh, T. P.
Grape (Vitis Vinifera) Leaf Disease Detection and Classification Using Deep Learning Techniques: A Study on Real-Time Grape Leaf Image Dataset in India [Volume 37, Issue 8, 2024, Pages 1522-1533]
-
SINGH, GURPREET
Experimental Study of Heat Transfer Rate in a Shell and Tube Heat Exchanger with Air Bubble Injection (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1160-1166]
-
SINGH, GURPREET
Experimental Analysis of Heat Transfer and Friction Factor in Plate Heat Exchanger with Different Orientations Using Al2O3 Nanofluids [Volume 29, Issue 10, 2016, Pages 1450-1458]
-
SINGH, VIJAY
Modeling and Availability Analysis of Internet Data Center with various Maintenance Policies [Volume 27, Issue 4, 2014, Pages 599-608]
-
Singhal, S.
Experimental Investigations on Microstructural and Mechanical Behavior of Friction Stir Welded Aluminum Matrix Composite [Volume 32, Issue 1, 2019, Pages 162-170]
-
Singh Pundhir, R.
M m m Queue with Balking, Reneging and Additional Servers [Volume 15, Issue 2, 2002, Pages 169-178]
-
Singh Pundhir, R.
Some Perspectives of Machine Repair Problems [Volume 23, Issue 3, 2010, Pages 253-268]
-
Singh Sikarwar, B
Estimate the Performance of Catalytic Converter Using Turbulence Induce Devices [Volume 31, Issue 5, 2018, Pages 856-862]
-
Sinitsa, N.
Potential of High-Carbon Domanik (Upper Devonian) Shale Deposits: Timan-Pechora Oil and Gas Province Assessment [Volume 37, Issue 8, 2024, Pages 1639-1657]
-
Siqi, L.
Investigation and Analysis of Empirical Field Seismic Damage to Bottom Frame Seismic Wall Masonry Structure [Volume 32, Issue 8, 2019, Pages 1082-1089]
-
Sirimontreea, S.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Sirisha, G.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Sistaninia, M.
Thermal Analysis of Laser Hardening for Different Moving Patterns [Volume 22, Issue 2, 2009, Pages 169-180]
-
Siva, R.
Experimental Investigation of Toughness Enhancement in Cement Mortar [Volume 31, Issue 11, 2018, Pages 1824-1829]
-
Sivabalan, T.
Effect of Tool Rotational Speed on the Tensile and Microstructural Properties of Friction Stir Welded Different Grades of Stainless Steel Joints [Volume 33, Issue 1, 2020, Pages 141-147]
-
Sivaji Babu, K.
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Sivakumar, B.
Effect of Tool Rotational Speed on the Tensile and Microstructural Properties of Friction Stir Welded Different Grades of Stainless Steel Joints [Volume 33, Issue 1, 2020, Pages 141-147]
-
Sivakumar, M. V. N.
An Experimental and Analytical Study on Alccofine Based High Strength Concrete [Volume 33, Issue 4, 2020, Pages 530-538]
-
Siva Kumar, MVN.
Enhancing Comfort in Tropical Institutional Buildings: Integrating Thermal, Acoustic and Visual Performance with a Unified Index [Volume 36, Issue 12, 2023, Pages 2253-2263]
-
Sivamani, J.
Sustainable Utilization of Dumped Concrete Wastes as Fine Aggregates in Concrete – An Experimental Study [Volume 35, Issue 9, 2022, Pages 1795-1802]
-
Sivamani, J.
Performance Studies on Glass Fiber Reinforced Recycled Aggregate Concrete [Volume 36, Issue 5, 2023, Pages 904-913]
-
Sivandipour, A.
A Parametric Study on Improved Reduced Beam Section Connections with Post-tensioning to Enhance Seismic Resilience [Volume 36, Issue 10, 2023, Pages 1857-1867]
-
Sivandi-Pour, A.
Statistical Prediction of Probable Seismic Hazard Zonation of Iran Using Self-organized Artificial Intelligence Model [Volume 32, Issue 4, 2019, Pages 467-473]
-
Sivandi-Pour, A.
Effects of Multiple Structure-soil-structure Interactions Considering the Earthquake Waveform and Structures Elevation Effects [Volume 33, Issue 5, 2020, Pages 744-752]
-
Sivandi-Pour, A.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Sivani, K.
Empirical Mode Decomposition based Adaptive Filtering for Orthogonal Frequency Division Multiplexing Channel Estimation [Volume 30, Issue 10, 2017, Pages 1517-1525]
-
Skovajsa, J.
Evaluation of a Mobile Highway Management System at Roadwork Zones [Volume 35, Issue 5, 2022, Pages 900-907]
-
Smirnova, E. A.
Hydrodynamic Modeling and Evaluation of Partial Substitution of Cushion Gas During Creation of Temporary Underground Gas Storage in an Aquifer [Volume 37, Issue 7, 2024, Pages 1221-1230]
-
Smith, D. J.
Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
-
Snigdh, Itu
Quasi Random Deployment Strategy for Reliable Communication Backbones in Wireless Sensor Networks [Volume 28, Issue 10, 2015, Pages 1430-1438]
-
Sobamowo, Gbeminiyi
Dynamic Analysis of Circular Plates in Contact with Fluid and Resting on Two-Parameter Foundations [Volume 32, Issue 12, 2019, Pages 1798-1804]
-
Sobhanollahi, Mohammad Ali
Analytic Network Process Based Strategic Planning for Iran's Trade Promotion Organization [Volume 27, Issue 8, 2014, Pages 1215-1222]
-
Sobhanollahi, Mohammad Ali
Assessment of Improvement of Preventive Maintenance Systems Related to the Civil Projects Using Concepts of Value Engineering (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1872-1878]
-
Sobouti, M. A.
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Soegijono, B.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Soegijono, B.
Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
-
Soegijono, Bambang
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Soepandji, B. S.
Development of Work Breakdown Structure for Stadium Work as Project Guideline and Standard [Volume 35, Issue 7, 2022, Pages 1291-1299]
-
Soeparman, Sudjito
Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
-
Soetrisnanto, Danny
Phytoremediation of Palm Oil Mill Effluent by using Pistia Stratiotes Plant and Algae Spirulina sp for Biomass Production (RESEARCH NOTE) [Volume 27, Issue 12, 2014, Pages 1809-1814]
-
Sofyan, N.
Characteristics of PANi/rGO Nanocomposite as Protective Coating and Catalyst in Dye-sensitized Solar Cell Counter Electrode Deposited on AISI 1086 Steel Substrate [Volume 31, Issue 10, 2018, Pages 1741-1748]
-
Sogandi, F.
A Robust Control Chart for Monitoring Autocorrelated Multiple Linear Profiles in Phase I [Volume 36, Issue 8, 2023, Pages 1429-1439]
-
Sogandi, Fatemeh
Estimating the Time of a Step Change in Gamma Regression Profiles Using MLE Approach [Volume 28, Issue 2, 2015, Pages 224-233]
-
Sogandi, Fatemeh
Isotonic Change Point Estimation in the AR(1) Autocorrelated Simple Linear Profiles [Volume 28, Issue 7, 2015, Pages 1059-1067]
-
Sohrabi, A.
Research and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE) [Volume 20, Issue 2, 2007, Pages 193-201]
-
Sohrabi, Babak
Experiments To Determine The Simulated Annealing Parameters Case Study In VRP [Volume 17, Issue 1, 2004, Pages 71-80]
-
Sohrabi, Somayrh
Fe/TiO2 Catalyst for Photodegradation of Phenol in Water [Volume 28, Issue 4, 2015, Pages 499-506]
-
Sohrabpoor, S
A Study on the Contact Ellipse and the Contact Pressure During the Wheel Wear through Passing the Tracks including Several Sharp Curves [Volume 31, Issue 5, 2018, Pages 826-833]
-
Sohrabvandi, S.
A New Extended Analytical Hierarchy Process Technique with Incomplete Interval-valued Information for Risk Assessment in IT Outsourcing [Volume 30, Issue 5, 2017, Pages 739-748]
-
Sojoudi Ziyabari, S. H.
Parallel Implementation of Particle Swarm Optimization Variants Using Graphics Processing Unit Platform [Volume 30, Issue 1, 2017, Pages 48-56]
-
Sokri, M. N. M.
CO2 Selective Carbon Tubular Membrane: The Effect of Stabilization Temperature on BTDA-TDI/MDI P84 Co-polyimide [Volume 31, Issue 8, 2018, Pages 1356-1363]
-
Solanki, C. H.
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Solanki, C. H.
Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]
-
Solat, A. R.
Coordinated Control of Doubley Fed Induction Generator Virtual Inertia and Power System Oscillation Damping Using Fuzzy Logic [Volume 32, Issue 4, 2019, Pages 536-547]
-
Solati-Hashjin, M.
Preparation Zirconia Toughened Alumina by Deflocculation-Flocculation Route (TECHNICAL NOTE). [Volume 10, Issue 1, 1997, Pages 49-54]
-
Soleimani, G.
A Numerical Study of Natural Convection and Radiation Interaction in Vertical Circular Pin [Volume 10, Issue 3, 1997, Pages 163-172]
-
Soleimani, G.
Combined Radiation and Natural Convection in Participating Laminar Flow Over a Vertical Circular Pin [Volume 11, Issue 2, 1998, Pages 83-92]
-
Soleimani, H.
Investigation of Charged Particles Radiation Moving in a Homogeneous Dispersive Medium (TECHNICAL NOTE) [Volume 30, Issue 5, 2017, Pages 678-683]
-
Soleimani, M.
Inhomogeneous Effects of Temperature Change on the Velocity of Railgun in Three Dimensional Condition [Volume 14, Issue 1, 2001, Pages 41-48]
-
Soleimani, M.
Analysis of Planar Microstrip Circuits Using Three-Dimensional Transmission Line Matrix Method [Volume 15, Issue 2, 2002, Pages 147-156]
-
Soleimani, Mohammad
Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
-
Soleimani Alamdari, G.
Simple Functions for Predicting Thermodynamic Properties of Ammonia-Water Mixture (RESEARCH NOTE) [Volume 20, Issue 1, 2007, Pages 94-104]
-
Soleimani Alamdari, G.
Simple Equations for Predicting Entropy of Ammonia-Water Mixture [Volume 20, Issue 1, 2007, Pages 97-106]
-
Soleimani-Amiri, S.
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Soleimanzadeh, Sara
Influence of High Temperatures on Flexural Strength of Foamed Concrete Containing Fly Ash and Polypropylene Fiber [Volume 26, Issue 2, 2013, Pages 117-126]
-
Soleymani, A.
Performance Evaluation of the High-altitude Launch Technique to Orbit Using Atmospheric Properties [Volume 26, Issue 4, 2013, Pages 333-340]
-
Soleymani, A.
Modified L1 Adaptive Control Design for Satellite FMC Systems with Actuators Time Delay [Volume 31, Issue 11, 2018, Pages 1982-1990]
-
Soleymani, A.
A Method for Automatic Lane Detection using a Deep Network [Volume 35, Issue 4, 2022, Pages 802-809]
-
Soleymani, Ahmad
Effects Analysis of Frozen Conditions for Spacecraft Relative Motion Dynamics [Volume 25, Issue 4, 2012, Pages 301-308]
-
Soleymani, Ahmad
High Accuracy Relative Motion of Spacecraft Using Linearized Time-Varying J2-Perturbed Terms [Volume 26, Issue 4, 2013, Pages 323-332]
-
Soleymani, S.
A New Optimal Distributed Strategy to Mitigate the Phase Imbalance in Smart Grids [Volume 33, Issue 12, 2020, Pages 2489-2495]
-
Soleymanian, Mir Emad
Monitoring and Change Point Estimation of AR(1) Autocorrelated Polynomial Profiles [Volume 26, Issue 9, 2013, Pages 933-942]
-
Soliman, N. F.
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Soltan, A.
Design and Development of High Gain, Low Profile and Circularly Polarized Cavity-backed Slot Antennas Using High-order Modes of Square Shaped Substrtae Integrated Waveguide Resonator [Volume 30, Issue 12, 2017, Pages 1840-1847]
-
Soltani, A. R.
Stochastic Synthesis of Drouths for Reservoir Storage Design (RESEARCH NOTE). [Volume 6, Issue 1, 1993, Pages 59-63]
-
Soltani, Elshan
A Fast Immersed Boundary Fourier Pseudo-spectral Method for Simulation of the Incompressible Flows [Volume 27, Issue 9, 2014, Pages 1457-1466]
-
Soltani, F.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Soltani, H.
A Solution of Riccati Nonlinear Differential Equation using Enhanced Homotopy Perturbation Method (EHPM) [Volume 21, Issue 1, 2008, Pages 27-38]
-
Soltani, Iman
Eagle Strategy Based Maximum Power Point Tracker for Fuel Cell System [Volume 28, Issue 4, 2015, Pages 529-536]
-
Soltani, J.
Computer Simulation of Converter Fed Synchronuse Machine Drives Contaning Space Harmonics [Volume 10, Issue 2, 1997, Pages 71-84]
-
Soltani, J.
Application of SVC on Large Synchronous Motors Based on LOC Design (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 235-246]
-
Soltani, J.
A Novel Stand-Alone Single-Phase Induction Generator Using a Three-Phase Machine and a Single-Phase PWM Inverter [Volume 16, Issue 3, 2003, Pages 259-268]
-
Soltani, J.
Robust Optimal Speed Tracking Control of a Current Sensorless Synchronous Reluctance Motor Drive using a New Sliding Mode Controller [Volume 17, Issue 2, 2004, Pages 155-170]
-
Soltani, J.
A Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer [Volume 19, Issue 1, 2006, Pages 21-34]
-
Soltani, J.
Robust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks and Sliding Mode Flux Observers [Volume 20, Issue 3, 2007, Pages 221-232]
-
Soltani, J.
An Adaptive Nonlinear Controller for Speed Sensorless PMSM Taking the Iron Loss Resistance into Account (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 151-160]
-
Soltani, M. R.
Flow Field Study Over the Wing of a Fighter-Type Aircraft Model [Volume 17, Issue 4, 2004, Pages 399-410]
-
Soltani, M. R.
Surface Pressure Contour Prediction Using a GRNN Algorithm [Volume 27, Issue 6, 2014, Pages 819-828]
-
Soltani, Roya
A New Nonlinear Multi-objective Redundancy Allocation Model with the Choice of Redundancy Strategy Solved by the Compromise Programming Approach [Volume 27, Issue 4, 2014, Pages 545-552]
-
Soltani, Roya
Redundancy Allocation Combined with Supplier Selection for Design of Series-parallel Systems [Volume 28, Issue 5, 2015, Pages 730-737]
-
Soltani, Roya
A Hybrid Meta-heuristic for the Dynamic Layout Problem with Transportation System Design [Volume 28, Issue 8, 2015, Pages 1175-1185]
-
Soltanian, Zagros
Secured Route Optimization and Micro-mobility with Enhanced Handover Scheme in Mobile IPv6 Networks [Volume 29, Issue 11, 2016, Pages 1530-1538]
-
Soltanifar, R.
A Complex Network-based Approach for Designing of Wide Area Measurement Systems in Smart Grids using Adam-Eve Like Genetic Algorithm [Volume 37, Issue 2, 2024, Pages 298-311]
-
Soltani Goharrizi, A
Eulerian Lagrangian Simulation of Particle Capture and Dendrite Formation on Binary Fibers [Volume 31, Issue 7, 2018, Pages 1004-1011]
-
Soltan-Mohammadi, Omid
A Planar, Layered Ultra-wideband Metamaterial Absorber for Microwave Frequencies [Volume 30, Issue 3, 2017, Pages 338-343]
-
Somasundar, H.V.
Integrated Approach for Cellular Manufacturing a Case Study (TECHNICAL NOTE) [Volume 17, Issue 1, 2004, Pages 73-84]
-
Somasundaram, B.
High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment [Volume 35, Issue 7, 2022, Pages 1416-1427]
-
Sonawane, G. D.
Tool Life of Uncoated and Coated Inserts during Turning of Ti6Al4V-ELI under Dry and Minimum Quantity Lubrication Environments [Volume 36, Issue 2, 2023, Pages 191-198]
-
Song, N.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Soni, S.
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Soni, S.
Friction and Wear Performance of Brake Pad and Optimization of Manufacturing Parameters using Grey Relational Analysis [Volume 35, Issue 3, 2022, Pages 552-559]
-
Sony, Rose
Physico-Mechanical Characterization of Recycled Waste Tire Rubber and Rice Straw Reinforced Composite [(Articles in Press)]
-
Soofifard, R.
A New Approach to Project Risk Responses Selection with Inter-dependent Risks [Volume 30, Issue 5, 2017, Pages 720-728]
-
Soolaki, M
Modeling the Trade-off between Manufacturing Cell Design and Supply Chain Design [Volume 31, Issue 4, 2018, Pages 640-647]
-
Soomro, D. M.
Optimal Load Shedding for Voltage Collapse Prevention Following Overloads in Distribution System [Volume 36, Issue 7, 2023, Pages 1230-1238]
-
Soon, C. F
Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique [Volume 31, Issue 8, 2018, Pages 1302-1307]
-
Soosani, M.
Generating and Focusing the Ultrasound Waves Using Elastomer-based Capacitive Micro-Speakers [Volume 33, Issue 2, 2020, Pages 320-328]
-
Soozanian Kashani, Mehdi
Fluid Dynamics in a Copper Converter: an Investigation on Mixing Phenomena in an Experimental Model [Volume 29, Issue 1, 2016, Pages 118-126]
-
Sopiyan, S.
Synthesis of Hard Layer by Titanium Addition During Welding Process and Quenched Directly [Volume 36, Issue 3, 2023, Pages 532-539]
-
Sorochak, A. P.
Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
-
Sorokin, K. V.
Integral Assessment of Influence Mechanism of Heavy Particle Generator on Hydrocarbon Composition of Vehicles Motor Fuel [Volume 37, Issue 8, 2024, Pages 1700-1706]
-
Sorokopud, N. I.
Peculiarities of Abrasive Finishing of Surfaces of Parts Made of Aluminium Alloy of АМts Grade in Magnetic Field [Volume 37, Issue 6, 2024, Pages 1098-1105]
-
Sorrell, C. C
Parametric Optimization of Electro Spark Microwelding of Aluminum Clad Steel (RESEARCH NOTE) [Volume 31, Issue 7, 2018, Pages 1146-1151]
-
Sorrell, C. C.
Interface Characterization of Plasma Sprayed Hydroxyapatite Coat on Ti 6Al 4V [Volume 15, Issue 2, 2002, Pages 173-182]
-
Sorrell, C. C.
A Study of Zeta Potential of Plasma Sprayed Hydroxyapatite Coating in Four Simulated Physiological Solutions [Volume 16, Issue 4, 2003, Pages 343-354]
-
Souhar, Mohamed
Analysis of the Characteristics, Physical Concepts and Entropy Generation in a Turbulent Channel Flow Using Vortex Blob Method [Volume 29, Issue 7, 2016, Pages 985-994]
-
Souri, A.
A Compositional Adaptation-based Approach for Recommending Learning Resources in Software Development [Volume 35, Issue 7, 2022, Pages 1317-1329]
-
Spoorthy, G.
Multi-criteria– Recommendations using Autoencoder and Deep Neural Networks with Weight Optimization using Firefly Algorithm [Volume 36, Issue 1, 2023, Pages 130-138]
-
Sreehari, V.M.
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Sreeman, D.
Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations [Volume 35, Issue 11, 2022, Pages 2176-2185]
-
Sreenivasa Prasad, K. V.
Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy [Volume 31, Issue 6, 2018, Pages 943-948]
-
Sreenivasa Rao, D.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Sreenivasa Rao, D.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
-
Sreenu, R.
Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates [Volume 37, Issue 4, 2024, Pages 625-634]
-
SRIBENJACHOT, S.
Global Supply Chain Management under Carbon Emission Trading Program Using Mixed Integer Programming and Genetic Algorithm [Volume 24, Issue 1, 2011, Pages 37-53]
-
Sridhar, G
A Novel Generalized Topology for Multi-level Inverter with Switched Series-parallel DC Sources (RESEARCH NOTE) [Volume 30, Issue 6, 2017, Pages 851-858]
-
Sridhar Reddy, A.
Collision-free Inverse Kinematics of Redundant Manipulator for Agricultural Applications through Optimization Techniques [Volume 35, Issue 7, 2022, Pages 1343-1354]
-
Sridher, T.
Performance Evaluation of Onboard Wi-Fi Module Antennas in Terms of Orientation and Position for IoT Applications [Volume 35, Issue 10, 2022, Pages 1918-1928]
-
Sri Harsha, A.
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Srii Hari Thipesh, D.
Robot Arm Performing Writing through Speech Recognition Using Dynamic Time Warping Algorithm [Volume 30, Issue 8, 2017, Pages 1238-1245]
-
Srinivasacharya, D
Flow Over an Exponentially Stretching Porous Sheet with Cross-diffusion Effects and Convective Thermal Conditions [Volume 31, Issue 1, 2018, Pages 120-127]
-
Srinivasan, E
Neural Network Based Recognition System Integrating Feature Extraction and Classification for English Handwritten [Volume 25, Issue 2, 2012, Pages 99-106]
-
Srinivasan, Sujatha
Performance Evaluation of Magnetorheological Damper Valve Configurations Using Finite Element Method [Volume 30, Issue 2, 2017, Pages 303-310]
-
Srinivasa Rao, K.
Performance Analysis and Optimization of Asymmetric Front and Back Pi Gates with Dual Material in Gallium Nitride High Electron Mobility Transistor for Nano Electronics Application [Volume 36, Issue 7, 2023, Pages 1269-1277]
-
Srinivasa Rao, K.
Design and Qualitative Analysis of Hetero Dielectric Tunnel Field Effect Transistor Device [Volume 36, Issue 6, 2023, Pages 1129-1135]
-
Srinivasa Rao, K.
Design and Analysis of Hetero Dielectric Dual Material Gate Underlap Spacer Tunnel Field Effect Transistor [Volume 36, Issue 12, 2023, Pages 2137-2144]
-
Srinivasa Rao, K.
Design and Performance Analysis of High-k Gate All Around Fin-field Effect Transistor [Volume 37, Issue 3, 2024, Pages 476-483]
-
Srinivasa Rao, K.
Gate Oxide Thickness and Drain Current Variation of Dual Gate Tunnel Field Effect Transistor [Volume 37, Issue 3, 2024, Pages 520-528]
-
Srinivasa Rao, K.
Design and Analysis of Symmetrical Dual Gate Tunnel Field Effect Transistor with Gate Dielectric Materials in 10nm Technology [Volume 37, Issue 4, 2024, Pages 588-595]
-
Srinivasa Rao, K.
Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node [Volume 37, Issue 5, 2024, Pages 887-895]
-
Srinivasa Rao, K.
Design and Performance Analysis of Charge Plasma Tunnel Field Effect Transistor (CP-TFET) for Digital, Analog, and RF Applications [(Articles in Press)]
-
Srinivasa Rao, K.
Design and Simulation of Silicon Germanium Based Double Gate Tunnel FET [(Articles in Press)]
-
Srinivasa Rao, K.
Design and Simulation of Silicon Germanium Based Full Gate Tunnel FET [(Articles in Press)]
-
Srinivasa Rao, P
Pongamia pinnata Plant Seed Oil as Dielectric Fluid for Electro Discharge Machining Process [Volume 32, Issue 12, 2019, Pages 1805-1812]
-
Srivastava, R.
Analyse Power Consumption by Mobile Applications Using Fuzzy Clustering Approach [Volume 31, Issue 12, 2018, Pages 2037-2043]
-
Srivastava, V.
Evaluation and Prediction of Self-healing Assessments for AA2014 Based Hybrid Smart Composite Structures: A Novel Fuzzy Logic Approach [Volume 35, Issue 10, 2022, Pages 1841-1857]
-
Srividya, K.
Mining Interesting Aspects of a Product using Aspect-based Opinion Mining from Product Reviews (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1707-1713]
-
Srusti, B.
Experimental and Numerical Investigation of Air Temperature Distribution inside a Car under Solar Load Condition [Volume 32, Issue 7, 2019, Pages 1031-1039]
-
S. Sousa, H.
Flanges' Impact on Persian Historical Masonry Walls: Modeling Safety Factors [Volume 37, Issue 6, 2024, Pages 1136-1145]
-
Stephen, E. A.
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Stramigioli, S.
A New Mechanical Design for Legged Robots to Reduce Energy Consumption [Volume 33, Issue 12, 2020, Pages 2530-2537]
-
Stroykov, G. A.
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Subadra, S. U. I
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Subagyo, R.
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Subarmono, S
Modelling and Optimisation of Coconut Shell Drying and Carbonisation Using Multi-response Taguchi Method with Multi-response Signal-to-noise Procedure [Volume 31, Issue 3, 2018, Pages 464-472]
-
Subramanian, Nithya
Analysis and Experimentation of Soft Switched Interleaved Boost Converter for Photovoltaic Applications [Volume 28, Issue 10, 2015, Pages 1469-1475]
-
Sudhakar Babu, S.
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Sudiana, I. N.
Characterization of Ceramic Membrane based on Calcium Carbonate from Onyx Stone and Its Application for Coconut Sap Treatment [Volume 35, Issue 2, 2022, Pages 300-306]
-
Sudiarso, Andi
Influence of Concentration of Copper Electrolyte, Voltage, and Time of Electroforming on Conductive Acrylonitrile Butadiene Styrene Parts on Deposition Rate and Microstructure [(Articles in Press)]
-
Sudiarso, Andi
Development of Lean Implementation Framework for Indonesian Batik Small and Medium-Sized Enterprises [(Articles in Press)]
-
Sudin, Izman
Fixture Design Automation and Optimization Techniques: Review and Future Trends [Volume 27, Issue 11, 2014, Pages 1787-1794]
-
Sugito, N. T.
Utilizing Semi-Variograms and Geostatistical Approach for Land Value Model in Urban Region [Volume 36, Issue 12, 2023, Pages 2222-2231]
-
Suharyadi, E.
Synthesis of Silica Nanoparticles from Silica Sand via Vibration Assisted Alkaline Solution Method [Volume 35, Issue 7, 2022, Pages 1300-1306]
-
Sujatha, S.
Design and Evaluation of a Magnetorheological Damper Based Prosthetic Knee [Volume 32, Issue 1, 2019, Pages 146-152]
-
Sujitha, Maria
Fusion of Panchromatic and Multispectral Images Using Non Subsampled Contourlet Transform and FFT Based Spectral Histogram (RESEARCH NOTE) [Volume 28, Issue 10, 2015, Pages 1455-1462]
-
Sukma, D. I.
Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy [Volume 35, Issue 7, 2022, Pages 1246-1256]
-
Suksawad, A.
Mixed-mode Multiphase Sinusoidal Oscillators using Differential Voltage Current Conveyor Transconductance Amplifiers and Only Grounded Passives Components [Volume 36, Issue 5, 2023, Pages 1023-1033]
-
Sulaiman, R. N. R
D2EHPA-Sulfuric Acid System for Simultaneous Extraction and Recovery of Nickel Ions via Supported Liquid Membrane Process [Volume 31, Issue 8, 2018, Pages 1373-1380]
-
Suleymanov, Mahsud
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Sultana, N
Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique [Volume 31, Issue 8, 2018, Pages 1302-1307]
-
Sumalatha, J.
Design of Soil Remediation Techniques from Column Leaching Test Results [Volume 35, Issue 2, 2022, Pages 344-350]
-
Sumardi, Dr.
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Sumardiono, Siswo
Effect of Total Solid Content to Biogas Production Rate from Vinasse (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 177-184]
-
Sumardiono, Siswo
Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]
-
SUMATHI, SETHUPATHI
A Comparative Study on Performance of Two Aerobic Sequencing Batch Reactors with Flocculated and Granulated Sludge Treating an Industrial Estate Wastewater: Process Analysis and Modeling [Volume 26, Issue 2, 2013, Pages 105-116]
-
Sumi, L
Intelligent Traffic Management System for Prioritizing Emergency Vehicles in a Smart City (TECHNICAL NOTE) [Volume 31, Issue 2, 2018, Pages 278-283]
-
Sun, Binbin
Benefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application [Volume 28, Issue 11, 2015, Pages 1656-1662]
-
Sun, Binbin
Parameters Design and Economy Study of an Electric Vehicle with Powertrain Systems in Front and Rear Axle [Volume 29, Issue 4, 2016, Pages 454-463]
-
Sun, Binbin
Research of Intake Valve Deactivation on Engine Performance [Volume 29, Issue 4, 2016, Pages 473-481]
-
Sun, C.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Sun, X.
Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
-
Sun, Y.
Glow Discharge Depth Profiling a Powerful Analytical Technique in Surface Engineering (TECHNICAL NOTE) [Volume 10, Issue 2, 1997, Pages 111-119]
-
Sun, Zhijun
Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
-
Sunagar, P.
Studies on Contaminated Mine Soil and Its Remediation Using Soil Washing Technique - A Case Study on Soil at Kolar Gold Fields [Volume 35, Issue 1, 2022, Pages 201-212]
-
Sunanto, Dedy Triawan
Computer Simulation Studies on the Effect Overlap Ratio for Savonius Type Vertical Axis Marine Current Turbine [Volume 23, Issue 1, 2010, Pages 79-88]
-
Sunardi, S.
Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]
-
Sunardi, S.
CNN-based Approach for Enhancing Brain Tumor Image Classification Accuracy [Volume 37, Issue 5, 2024, Pages 984-996]
-
Sunaryono, S.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Sundarajoo, S.
Optimal Load Shedding for Voltage Collapse Prevention Following Overloads in Distribution System [Volume 36, Issue 7, 2023, Pages 1230-1238]
-
Sundara Kuma, P.
Eco-friendly Self-curing Concrete Incorporated with Polyethylene Glycol as Self-curing Agent (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 473-478]
-
Sundar Manoharan, S
Seismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE) [Volume 32, Issue 11, 2019, Pages 1543-1547]
-
Sundjono, S.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Sundjono, S.
Exploration of Eucheuma Seaweed Algae Extract as a Novel Green Corrosion Inhibitor for API 5L Carbon Steel in Hydrochlorid Acid Medium [Volume 35, Issue 3, 2022, Pages 596-603]
-
Sunil R., Y.
Investigation of Wear Behavior of Biopolymers for Total Knee Replacements Through Invitro Experimentation [Volume 33, Issue 8, 2020, Pages 1560-1566]
-
Sunitha, R.
Evolutionary Computing Assisted Wireless Sensor Network Mining for QoS-Centric and Energy-efficient Routing Protocol [Volume 33, Issue 5, 2020, Pages 791-797]
-
Supandi, S.
Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
-
Supardi, Z. A. I.
Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
-
Supraba, I.
Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
-
Suprayogi, Dedy
Experimental Studies on Savonius-type Vertical Axis Turbine for Low Marine Current Velocity [Volume 26, Issue 1, 2013, Pages 91-98]
-
Supriadi, S
Mechanical Surface Treatments of Ti-6Al-4V Miniplate Implant Manufactured by Electrical Discharge Machining (TECHNICAL NOTE) [Volume 31, Issue 7, 2018, Pages 1103-1108]
-
Suratgar, A. Abolfazl
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Suresh, P.
Dynamic Response of Glass/Epoxy Laminated Composite Plates under Low-velocity Impact [Volume 35, Issue 7, 2022, Pages 1283-1290]
-
Suresh, R.
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Sureshkumar, D.
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Suryanto, S
Developing of Corrosion Resistance Nano Copper Oxide Coating on Copper using Anodization in Oxalate solution [Volume 31, Issue 3, 2018, Pages 450-455]
-
Suryawanshi, S.
Analytical and Experimental Investigation of Recycled Aggregate Concrete Beams Subjected to Pure Torsion [Volume 35, Issue 10, 2022, Pages 1959-1966]
-
Suryawanshi, S.
Effect of Replacement Ratio on Torsional Behaviour of Recycled Aggregate Concrete Beams [Volume 36, Issue 4, 2023, Pages 659-668]
-
Suryawanshi, S.
Development and Calibration of an Efficiency Factor Model for Recycled Aggregate Concrete Struts [Volume 36, Issue 8, 2023, Pages 1449-1458]
-
Suryawanshi, S. R.
Comprehensive Analysis of Stress-strain Relationships for Recycled Aggregate Concrete [Volume 35, Issue 11, 2022, Pages 2102-2110]
-
Suryawanshi, S. R.
Finite Element Modelling of Laboratory Tests on Reinforced Concrete Beams Containing Recycled Aggregate Concrete [Volume 36, Issue 5, 2023, Pages 991-999]
-
Suryawanshi, S. R.
Optimal Prediction of Shear Properties in Beam-Column Joints Using Machine Learning Approach [Volume 37, Issue 1, 2024, Pages 67-82]
-
Suryawanshi, S. R.
Experimental Study on Self-compacting and Self-healing Concrete with Recycled Coarse Aggregates [Volume 37, Issue 4, 2024, Pages 625-634]
-
Suryawanshi, T.
Human Disease Prediction using Machine Learning Techniques and Real-life Parameters [Volume 36, Issue 6, 2023, Pages 1092-1098]
-
Suryawanshi, Trupti V
EmoSense: Pioneering Facial Emotion Recognition with Precision Through Model Optimization and Face Emotion Constraints [(Articles in Press)]
-
Susanti, S.
Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
-
Susarla, V.
Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution [Volume 35, Issue 8, 2022, Pages 1479-1487]
-
Susetyo, F. B.
Synthesis of Hard Layer by Titanium Addition During Welding Process and Quenched Directly [Volume 36, Issue 3, 2023, Pages 532-539]
-
Susetyo, F. B.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Susetyo, F. B.
Synthesis of Polyvinyl Alcohol-Chitosan Composite Film using Nanocellulose from Coconut Fibers (Cocos nucifera) [Volume 36, Issue 11, 2023, Pages 1993-2003]
-
Susetyo, F. B.
Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
-
Susetyo, Ferry Budhi
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Sushama, M.
Design and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques [Volume 30, Issue 11, 2017, Pages 1762-1770]
-
Sutarja, I.N.
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Suthar, B. N
Design Optimization of Axial Flux Surface Mounted Permanent Magnet Brushless DC Motor For Electrical Vehicle Based on Genetic Algorithm [Volume 31, Issue 7, 2018, Pages 1050-1056]
-
Suthar, B. N.
Cogging Torque Reduction of Sandwiched Stator Axial Flux Permanent Magnet Brushless DC Motor using Magnet Notching Technique [Volume 32, Issue 7, 2019, Pages 940-946]
-
Sutiami, R.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Sverguzova, S.
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Svistunov, O.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Syaichurrozi, I.
Effect of Tofu Wastewater Addition on the Growth and Carbohydrate-Protein-Lipid Content of Spirulina platensis (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1631-1638]
-
Syamsuir, S.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Syarief, A.
Combustion Behavior of Fuel Briquettes Made from Ulin Wood and Gelam Wood Residues [Volume 33, Issue 11, 2020, Pages 2365-2371]
-
Syaripuddin, S.
Synthesis of Hard Layer by Titanium Addition During Welding Process and Quenched Directly [Volume 36, Issue 3, 2023, Pages 532-539]
-
Syed, Abdul Sattar
Embedded Memory Test Strategies and Repair [Volume 30, Issue 6, 2017, Pages 839-845]
-
Syzrantsev, V.
Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]
-
Syzrantseva, K.
Designing a High Resistant, High-torque Downhole Drilling Motor (RESEARCH NOTE) [Volume 30, Issue 10, 2017, Pages 1615-1621]
T
-
T, Kireeti
Design and Performance Analysis of Charge Plasma Tunnel Field Effect Transistor (CP-TFET) for Digital, Analog, and RF Applications [(Articles in Press)]
-
T, Kireeti
Design and Simulation of Silicon Germanium Based Double Gate Tunnel FET [(Articles in Press)]
-
T, Lakshmanan
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
-
T, ManvelRaj
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
-
Taajobian, M.
Drug Discovery Acceleration Using Digital Microfluidic Biochip Architecture and Computer-aided-design Flow [Volume 32, Issue 8, 2019, Pages 1169-1176]
-
Taalebinezhaad, M.A.
Robot Motion Vision Pait I: Theory [Volume 8, Issue 1, 1995, Pages 23-36]
-
Taalebinezhaad, M.A.
Robot Motion Vision Part II: Implementation [Volume 8, Issue 2, 1995, Pages 113-120]
-
Tabasi, M.
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Tabasi, S.
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Tabassom, R.
Installation Depth and Incident Wave Height Effect on Hydrodynamic Performance of a Flap Type Wave Energy Converter: Experimental Analysis [Volume 35, Issue 12, 2022, Pages 2283-2290]
-
Tabatabaee Ghomi, M.
Mechanical Strength Improvement of Mud Motor’s Elastomer by Nano Clay and Prediction the Working Life via Strain Energy [Volume 32, Issue 2, 2019, Pages 338-345]
-
Tabatabaee Moradi, S.
Effect of Carbonate Additives on Dynamic Filtration Index of Drilling Mud [Volume 33, Issue 5, 2020, Pages 934-939]
-
Tabatabaee Moradi, Seyyed Shahab
Optimization of Cement Spacer Rheology Model Using Genetic Algorithm (RESEARCH NOTE) [Volume 29, Issue 1, 2016, Pages 127-131]
-
Tabatabaee Moradi, Seyyed Shahab
Considerations of Well Cementing Materials in High-Pressure, High-Temperature Conditions (RESEARCH NOTE) [Volume 29, Issue 9, 2016, Pages 1214-1218]
-
Tabatabaee Moradi, Seyyed Shahab
Reliability analysis of a drilling bit penetration model in oil and gas wells: A case study [(Articles in Press)]
-
Tabatabaee Moradi, S. S
Improvement of Cement Properties Using a Single Multi-functional Polymer [Volume 31, Issue 1, 2018, Pages 181-187]
-
Tabatabaee Moradi, S. S.
Sedimentation Stability of Oil Well Cements in Directional Wells (TECHNICAL NOTE) [Volume 30, Issue 7, 2017, Pages 1105-1109]
-
Tabatabaee Moradi, S. S.
Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
-
Tabatabaee Moradi, S.S
Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
-
Tabatabaei, N. A.
FDTD Analysis of Top-Hat Monopole Antennas Loaded with Radially Layered Dielectric [Volume 17, Issue 3, 2004, Pages 251-262]
-
Tabatabaei, N. M.
Rcd Rules and Power Systems Observability [Volume 9, Issue 3, 1996, Pages 159-168]
-
Tabatabaei, S. M. R
Investigating the Effects of Cold Bulge Forming Speed on Thickness Variation and Mechanical Properties of Aluminum Alloys: Experimental and Numerical [Volume 31, Issue 9, 2018, Pages 1602-1608]
-
Tabatabaeian, Zahra S.
Development of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs [Volume 30, Issue 3, 2017, Pages 344-350]
-
Tabatabaeian, Z. S
Sensitivity Analysis of a Wideband Backward-wave Directional Coupler Using Neural Network and Monte Carlo Method (RESEARCH NOTE) [Volume 31, Issue 5, 2018, Pages 729-733]
-
Tabatabaei Nejad, S. A.
Study on Attapulgite as Drilling Fluid Clay Additive in Persian Gulf Seawater [Volume 35, Issue 3, 2022, Pages 587-595]
-
Tabatabie, S. A.
Control of Engineering Properties of Asphalt Concrete Based on Permanent Deformation Constraint of Subgrade at Tropical Zones in Iran (TECHNICAL NOTE) [Volume 14, Issue 3, 2001, Pages 195-200]
-
Tabe Jamaat, S.
Numerical Study of Reduction of NOx Emission by High Temperature Air Combustion Technology [Volume 16, Issue 3, 2003, Pages 255-255]
-
Tabesh, M.
Head-Driven Simulation of Water Supply Networks [Volume 15, Issue 1, 2002, Pages 11-22]
-
Tabeshpour, M. R.
The Effect of Added Mass Fluctuation on Heave Vibration of TLP [Volume 18, Issue 3, 2005, Pages 219-228]
-
Tabkhi, F.
Operation Analysis of Rotary Tools of Compressor Station Using Exergy Approach [Volume 27, Issue 12, 2014, Pages 1815-1822]
-
Tabnak, A.
Seismic Damage and Disaster Management Maps (A Case Study) [Volume 21, Issue 4, 2008, Pages 337-344]
-
Tadarok, Samin
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Tadayoni Navaei, I
Random Vortex Method for Geometries with Unsolvable Schwarz-Christoffel Formula [Volume 31, Issue 1, 2018, Pages 38-44]
-
Tadi Beni, Y.
Investigation of the Size Effect on the Nano-beam Type Piezoelectric Low Power Energy Harvesting [Volume 31, Issue 9, 2018, Pages 1585-1592]
-
Tadi Beni, Z.
Investigation of the Size Effect on the Nano-beam Type Piezoelectric Low Power Energy Harvesting [Volume 31, Issue 9, 2018, Pages 1585-1592]
-
Taebi, M.
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Taeibi Rahni, M.
Computational Simulation of Hydrodynamic Convection in Rising Bubble Under Microgravity Condition [Volume 22, Issue 3, 2009, Pages 295-305]
-
Tafazzoli, Reza
OPTIMIZATION OF TREE-STRUCTURED GAS DISTRIBUTION NETWORK USING ANT COLONY OPTIMIZATION: A CASE STUDY [Volume 25, Issue 2, 2012, Pages 141-158]
-
Taghaddos, H.
A Novel Building Information Modeling-based Method for Improving Cost and Energy Performance of the Building Envelope [Volume 33, Issue 11, 2020, Pages 2162-2173]
-
Taghaddos, H.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Taghavi, Kamran
Photochemical Degradation of 2,4-dichlorophenol in Aqueous Solutions by Fe2+/ Peroxydisulfate/ UV Process [Volume 30, Issue 1, 2017, Pages 15-22]
-
Taghavi, Lobat
Experimental Study on the Factors Affecting Hexavalent Chromium Bioreduction by Bacillus cereus [Volume 29, Issue 2, 2016, Pages 152-159]
-
Taghavian Hakkak, M.
Nonlinear Analysis of Truss Structures Using Dynamic Relaxation (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 11-22]
-
Taghavifar, H.
Effects of Triple Injection Strategies on Performance and Pollutant Emissions of a DI Diesel Engine Using CFD Simulation [Volume 31, Issue 6, 2018, Pages 973-979]
-
Taghian, Majid
Behavior of Cu-Cr Powder Mixtures During Mechanical Alloying (TECHNICAL NOTE) [Volume 23, Issue 1, 2010, Pages 69-76]
-
Taghian Dehaghani, M
Fracture Mechanism of CoCrMo Porous Nano-composite Prepared by Powder Metallurgy Route [Volume 31, Issue 1, 2018, Pages 19-24]
-
Taghibakhsh, F.
Electrophoretic Formation of Zinc Oxide Based Ntc Rsistors (RESEARCH NOTE) [Volume 13, Issue 3, 2000, Pages 75-80]
-
Taghikhani, MohammadAli
Eagle Strategy Based Maximum Power Point Tracker for Fuel Cell System [Volume 28, Issue 4, 2015, Pages 529-536]
-
Taghilou, M.
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Taghilou, Mohammad
Simulation of Lid Driven Cavity Flow at Different Aspect Ratios Using Single Relaxation Time Lattice Boltzmann Method [Volume 26, Issue 12, 2013, Pages 1471-1478]
-
Taghilou, Mohammad
Optimization of Double Pipe Fin-pin Heat Exchanger Using Entropy Generation Minimization [Volume 27, Issue 9, 2014, Pages 1431-1438]
-
Taghinia, F.
Chemical Reaction-Diffusion Model Around a Vessel for Studying Temperature and Concentration of Three Chemical Species by Finite Element Method [Volume 36, Issue 1, 2023, Pages 171-181]
-
Taghiyareh, F.
Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
-
Taghiyareh, Fattaneh
A Context-aware Architecture for Mental Model Sharing through Semantic Movement in Intelligent Agents [Volume 25, Issue 3, 2012, Pages 233-248]
-
Taghizadeh, Majid
Ultrasonic and Microwave Pretreatment for Hydrothermal Synthesis of Nanosized SAPO-34 and Their Catalytic Performance in MTO Reaction (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 330-337]
-
Taghizadeh, Seyed Reza
LEBRP - A Lightweight and Energy Balancing Routing Protocol for Energy-Constrained Wireless Ad Hoc Networks [Volume 27, Issue 1, 2014, Pages 33-38]
-
Taghizadehalvandi, Mahlagha
Multi-objective Solution Approaches for Employee Shift Scheduling Problems in Service Sectors (RESEARCH NOTE) [Volume 32, Issue 9, 2019, Pages 1312-1319]
-
Taghizadeh Kakhki, H.
Allocation of Posts to a Tele-Communication Center Through Kavos (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 73-78]
-
Taghizadieh, N.
Numerical Meshless Method in Conjunction with Bayesian Theorem for Electrical Tomography of Concrete [Volume 33, Issue 6, 2020, Pages 1070-1084]
-
Taghva, H. R.
Numerical Hydrodynamic Performance of the Stepped Planing Craft and Its Step Height Effect (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 602-607]
-
Tagimalek, H.
Experimental Investigation and Statistical Modeling of the Effective Parameters in Charpy Impact Test on AZ31 Magnesium Alloy with V-shape Groove Using Taguchi Method [Volume 33, Issue 12, 2020, Pages 2521-2529]
-
Tagimalek, H.
Experimental Investigation Joining Al 5083 and High-density Polyethylen by Protrusion Friction Stir Spot Welding Containing Nanoparticles using Taguchi Method [Volume 35, Issue 6, 2022, Pages 1144-1153]
-
Tagimalek, H.
Experimental and Numerical Investigation of the Formability of Cross and Accumulative Roll Bonded 1050 Aluminum Alloy Sheets in Single Point Incremental Forming Process [Volume 35, Issue 9, 2022, Pages 1707-1715]
-
Tagipour kolaei, Zahra
Characterization of Polypyrrole-hydroxyethylcellulose/TiO2 Nanocomposite: Thermal Properties and AFM Analysis [Volume 28, Issue 5, 2015, Pages 654-661]
-
Tahami, F.
A New Variable Frequency Zero Voltage Switching Control Method for Boost Converter Operating in Boundary Conduction Mode [Volume 33, Issue 11, 2020, Pages 2222-2232]
-
Tahami, Farzad
Voltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach [Volume 32, Issue 11, 2019, Pages 1610-1619]
-
Tahani, M
Study of Stone-wales Defect on Elastic Properties of Single-layer Graphene Sheets by an Atomistic based Finite Element Model [Volume 31, Issue 3, 2018, Pages 456-463]
-
Tahani, Masoud
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings [Volume 27, Issue 3, 2014, Pages 475-486]
-
Tahani, Masoud
Nonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 28, Issue 5, 2015, Pages 802-811]
-
Tahanian, E.
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Tahari, Mostafa
Effect of Surface Morphologies on the Isothermal Oxidation Behavior of MCrAlY Coatings Fabricated by High-velocity Oxyfuel Processes [Volume 30, Issue 3, 2017, Pages 432-438]
-
Taher, Seyed Abbas
Fuzzy Approximation Model-based Robust Controller Design for Speed Control of BLDC Motor [Volume 28, Issue 3, 2015, Pages 426-432]
-
Taheri, A. A.
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Taheri, Asghar
Magnetic Saturation Impacts on Fault Analysis of Squirrel-cage Six Phases Induction Motors using Winding Function Approach [Volume 27, Issue 9, 2014, Pages 1359-1366]
-
Taheri, Asghar
Digital Controller Designbased on Time Domain for DC-DC Buck Converter [Volume 28, Issue 5, 2015, Pages 693-700]
-
Taheri, E.
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
Taheri, F.
Multi-Objective Unrelated Parallel Machines Scheduling with Sequence-Dependent Setup Times and Precedence Constraints [Volume 21, Issue 3, 2008, Pages 269-278]
-
Taheri, M.
A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources [Volume 4, Issue 3, 1991, Pages 115-126]
-
Taheri, M.
A Non-destructive Ultrasonic Testing Approach for Measurement and Modelling of Tensile Strength in Rubbers [Volume 33, Issue 12, 2020, Pages 2549-2555]
-
Taheri, M.
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Taheri, M.
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Taheri, Mohammad Reza
Differential Flatness Method Based on Pre-set Guidance and Control Subsystem Design for a Surface to Surface Flying Vehicle (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 912-919]
-
Taheri, M. R.
Performance Evaluation of the High-altitude Launch Technique to Orbit Using Atmospheric Properties [Volume 26, Issue 4, 2013, Pages 333-340]
-
Taheri Ahangar, A.
Improvement of Die Corner Filling of Stepped Tubes Using Warm Hybrid Forming [Volume 32, Issue 4, 2019, Pages 587-595]
-
Taheri Amiri, M. J.
Optimization of Time, Cost, and Quality in Critical Chain Method Using Simulated Annealing (RESEARCH NOTE) [Volume 30, Issue 5, 2017, Pages 627-635]
-
Taherifar, Ali
Effect of Target Impedance Selection on the Lower Extremity Assistive Exoskeleton Performance [Volume 29, Issue 6, 2016, Pages 843-851]
-
Taheri Moghadam, Alireza
Capacitated Multimodal Structure of a Green Supply Chain Network Considering Multiple Objectives [Volume 26, Issue 9, 2013, Pages 963-974]
-
Taheri-Moghadam, Alireza
Integrated Competitive Pricing and Transshipment Problem for Short Life Cycle Products’ Supply Chain [Volume 32, Issue 8, 2019, Pages 1192-1199]
-
Taherinejad, Morteza
Steady Flow Analysis and Modeling of the Gas Distribution Network Using the Electrical Analogy (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1269-1276]
-
Taherkhani, M.
Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
-
Taherkhani, R.
Decision Support System for Analyzing Key Performance Indicators in Construction Projects Management [Volume 35, Issue 5, 2022, Pages 865-874]
-
Taherkhani, R.
Low Embodied Carbon and Energy Materials in Building Systems: A Case Study of Reinforcing Clay Houses in Desert Regions [Volume 36, Issue 8, 2023, Pages 1409-1428]
-
Taherkhorsandi, M.
Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO) [Volume 26, Issue 9, 2013, Pages 1089-1102]
-
Tahir, N. M
Vertical Ground Reaction Force Gait Patterns During Walking in Children with Autism Spectrum Disorders [Volume 31, Issue 5, 2018, Pages 705-711]
-
Tahmasbi, V.
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Tahmsbi, V.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Tai, B. T.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Taimury, E.
Optimal Solution in a Constrained Distribution System [Volume 15, Issue 2, 2002, Pages 179-190]
-
Taimury, E.
Impact of Transportation System on Total Cost in a Two-Echelon Dual Channel Supply Chain [Volume 24, Issue 1, 2011, Pages 27-36]
-
Tajadod, J.
A Laboratory Study of Removing Arsenic from a Synthetic Copper Concentrate [Volume 13, Issue 3, 2000, Pages 59-64]
-
Tajamolian, M.
A Versioning Approach to VM Live Migration [Volume 31, Issue 11, 2018, Pages 1838-1845]
-
Tajdin, Ali
A Novel Interactive Possibilistic Mixed Integer Nonlinear Model for Cellular Manufacturing Problem under Uncertainty [Volume 30, Issue 3, 2017, Pages 384-392]
-
Tajik Jamal-Abad, Milad
Thermal Conductivity of Cu and Al-Water Nanofluids [Volume 26, Issue 8, 2013, Pages 821-828]
-
Tajik Jamal-Abad, Milad
An Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE) [Volume 27, Issue 3, 2014, Pages 411-416]
-
Tajik Jamal-Abad, Milad
Analytical Investigation of Forced Convection in Thermally Developed Region of a Channel Partially Filled with an Asymmetric Porous Material- LTNE Model [Volume 29, Issue 7, 2016, Pages 975-984]
-
Tajik Jamal-Abad, Milad
Experimental Investigation on the Effect of Partially Metal Foam inside the Absorber of Parabolic Trough Solar Collector [Volume 30, Issue 2, 2017, Pages 281-287]
-
Tajul, L.
Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes [Volume 36, Issue 11, 2023, Pages 2004-2014]
-
Tajvidi, Mehdi
Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites [Volume 17, Issue 1, 2004, Pages 95-104]
-
Talati Kalasar, F.
An Experimental and Theoretical Study of Freezing of Pure Aluminum [Volume 16, Issue 2, 2003, Pages 183-196]
-
Talebi, E.
A Comprehensive Mathematical Model for Designing an Organ Transplant Supply Chain Network under Uncertainty [Volume 32, Issue 6, 2019, Pages 835-841]
-
Talebi, F
A Computational Study about the Effect of Turbines Pitched Blade Attack Angle on the Power Consumption of a Stirred Tank [Volume 31, Issue 1, 2018, Pages 65-70]
-
Talebi, Z.
Improved Distributed Particle Filter Architecture with Novel Resampling Algorithm for Signal Tracking [Volume 33, Issue 12, 2020, Pages 2482-2488]
-
Talebnia, F.
Kinetic Modeling of Enzymatic Hydrolysis of Pretreated Sorghum Bicolor and Rice Husk [Volume 30, Issue 11, 2017, Pages 1622-1630]
-
Talebnia, Ghodratalla
Conceptual Design of Sustainable Outsourcing with Balanced Scorecard Using Analytic Hierarchy Process: A Case Study for Fajr Jam Gas Refining Company [Volume 33, Issue 1, 2020, Pages 112-123]
-
Talebpour, Alireza
Presenting effective methods in the classification of echocardiographic views using deep learning [(Articles in Press)]
-
Talebpour, M. H.
The Effect of Caspian Sea Water on Corrosion Resistance and Compressive Strength of Reinforced Concrete Containing Different SiO2 Pozzolan [Volume 30, Issue 10, 2017, Pages 1464-1470]
-
Talebpour, Mohammad Hosein
Base Level Evaluation in Buildings with Different Foundation Levels by Soil-foundation-structure Interaction [Volume 30, Issue 9, 2017, Pages 1288-1297]
-
Talebzadeh, P.
Mathematical Formulation and Solving of Green Closed-loop Supply Chain Planning Problem with Production, Distribution and Transportation Reliability [Volume 31, Issue 12, 2018, Pages 2059-2067]
-
Taleizadeh, A. A
Cooperative Benefit and Cost Games under Fairness Concerns [Volume 31, Issue 8, 2018, Pages 1250-1257]
-
Taleizadeh, Ata Allah
Integrated Competitive Pricing and Transshipment Problem for Short Life Cycle Products’ Supply Chain [Volume 32, Issue 8, 2019, Pages 1192-1199]
-
Talesh Amiri, S.
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Talib, H. Y.
Improving Punching Shear in Flat Slab by Replacing Punching Shear Reinforcement by Ultrahigh Performance Concrete [Volume 35, Issue 8, 2022, Pages 1619-1628]
-
Talouti, S.
Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface [Volume 35, Issue 12, 2022, Pages 2337-2343]
-
Tam, N. C.
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Tamaddondar, M. M.
Hybrid Massive MIMO Channel Model Based on Edge Detection of Interacting Objects and Cluster Concept [Volume 35, Issue 2, 2022, Pages 471-480]
-
Tamim, Hossein
Unsteady Heat and Mass Transfer Near the Stagnation-point on a Vertical Permeable Surface: a Comprehensive Report of Dual Solutions [Volume 28, Issue 5, 2015, Pages 771-780]
-
Tamjidi, M.
Investigating the Effect of Considering Different Cross Section Design in Friction Stir Welded Joint Line of Dissimilar Aluminum Alloys [Volume 36, Issue 1, 2023, Pages 19-27]
-
Tam Nguyen, C.
Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
-
Tan, K. W
Comparative Studies on Ultrasound Pre-treated Peanut Husk Powder and Ultrasound Simultaneous Process on Heavy Metal Adsorption [Volume 31, Issue 8, 2018, Pages 1334-1340]
-
Tan, M. C
Comparative Studies on Ultrasound Pre-treated Peanut Husk Powder and Ultrasound Simultaneous Process on Heavy Metal Adsorption [Volume 31, Issue 8, 2018, Pages 1334-1340]
-
Tan, S.Y.
Pic Microcontroller-Based Automatic Meter Reading (AMR) System Using the Low Voltage (LV) Power Line Network (TECHNICAL NOTE) [Volume 18, Issue 1, 2005, Pages 39-50]
-
Tananykhin, D. S.
Scientific and Methodological Support of Sand Management During Operation of Horizontal Wells [Volume 37, Issue 7, 2024, Pages 1395-1407]
-
Tandel, K. D.
Effect of Friction Stir Processing on Fusion Welded Joint of Al-5083 [Volume 35, Issue 9, 2022, Pages 1735-1743]
-
Tandel, K. D.
Fabrication of Aluminum 5083/SiC Surface Composite on Tungsten Inert Gas Weld Joint by Novel Direct Friction Stir Processing Technique [Volume 36, Issue 3, 2023, Pages 523-531]
-
Tandel, Y. K.
Flood Hazard Assessment of Water-Front Geosynthetic Reinforced Soil Wall for Dam Regulation Rule Level [Volume 36, Issue 4, 2023, Pages 640-648]
-
Tang, Mingmin
Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
-
Tang, R.
Improved Adaptive Median Filter Algorithm for Removing Impulse Noise from Grayscale Images [Volume 30, Issue 10, 2017, Pages 1503-1509]
-
Tantray, Manzoor
Strain and Damage Sensing Property of Self-compacting Concrete Reinforced with Carbon Fibers [Volume 32, Issue 11, 2019, Pages 1577-1583]
-
Tao, L.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Tarafdar Hagh, Mehrdad
Radial Basis Neural Network Based Islanding Detection in Distributed Generation [Volume 27, Issue 7, 2014, Pages 1061-1070]
-
Tarafdar Hagh, Mehrdad
Optimal Reconfiguration of Solar Photovoltaic Arrays Using a Fast Parallelized Particle Swarm Optimization in Confront of Partial Shading [Volume 32, Issue 8, 2019, Pages 1177-1185]
-
Tarassodi, P.
Energy Management of an Integrated PV/Battery/Electric Vehicles Energy System Interfaced by a Multi-port Converter [Volume 36, Issue 8, 2023, Pages 1520-1531]
-
Taraz Jamshidi, Y.
Micro-structural Deformation Field Analysis of Aluminum Foam using Finite Element Method and Digital Image Correlation [Volume 33, Issue 10, 2020, Pages 2065-2078]
-
Tariverdilo, S.
Investigating The Seismic Response of Structural Walls Using Nonlinear Static and Incremental Dynamic Analyses [Volume 30, Issue 11, 2017, Pages 1691-1699]
-
Tariverdilo, S.
Effects of Radial Imperfection on the Load Capacity of Round HSS Columns [Volume 32, Issue 1, 2019, Pages 36-45]
-
Tariverdilo, S.
Experimental and Numerical Study of Perforated Steel Plate Shear Panels [Volume 33, Issue 4, 2020, Pages 520-529]
-
Tariverdilo, S.
Impact of High Strength Rebars on Seismic Behavior of Lightly Reinforced Boundary Elements [Volume 33, Issue 6, 2020, Pages 1094-1104]
-
Tariverdilo, S.
Evaluating Applicability of ASTM C 928 Approach in Assessing Adequacy of Patch Repair of Bridge Piers [Volume 33, Issue 12, 2020, Pages 2455-2463]
-
Tariverdilo, S.
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Tariverdilo, Saeed
Introduction of Air Cushion to Reduce Seismic Demand in Cylindrical Water Storage Tanks [Volume 29, Issue 4, 2016, Pages 464-472]
-
Tarokh, M.
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Tasirin, Siti Masrinda
Hydrodynamic Studies of Fluidized Bed Chemical Vapor Deposition Reactors to Produce Carbon Nano Tubes via Catalytic Decomposition over Co/Pd MgO [Volume 28, Issue 12, 2015, Pages 1693-1701]
-
Taslim, T
Isolationand Characterization of Nanocrystal from Corncob Waste Using H2SO4 Hydrolysis Method (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 533-537]
-
Tasnimi, A. A.
Seismic Behavior of Prefabricated Column-Footing Connection [Volume 12, Issue 4, 1999, Pages 205-218]
-
Tasnimi, A. A.
Micro-modeling of Masonry Infilled RC Moment Resisting Frames to Investigate Arrangement of Compressive Diagonal Struts [Volume 27, Issue 6, 2014, Pages 865-880]
-
Tasouji Hassanpour, Saeed
Solving Re-entrant No-wait Flow Shop Scheduling Problem [Volume 28, Issue 6, 2015, Pages 903-912]
-
Tatar, M.
Some Geometrical Bases for Incremental-Iterative Methods (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 245-256]
-
Taufiq, A.
Characterization of Fe3O4/rGO Composites from Natural Sources: Application for Dyes Color Degradation in Aqueous Solution [Volume 33, Issue 1, 2020, Pages 18-27]
-
Taufiq, A.
Radar Absorption Performance of Fe3O4/AC/PANI Nanocomposites Prepared from Natural Iron Sand [Volume 33, Issue 2, 2020, Pages 304-313]
-
Tavakkoli, A.
Performance of High-strength Concrete Made with Recycled Ceramic Aggregates (Research Note) [Volume 33, Issue 6, 2020, Pages 1085-1093]
-
Tavakkoli-Moghaddam, R
Closed-loop Supply Chain Inventory-location Problem with Spare Parts in a Multi-Modal Repair Condition [Volume 31, Issue 2, 2018, Pages 346-356]
-
Tavakkoli-Moghaddam, R
Solving a New Multi-objective Inventory-Routing Problem by a Non-dominated Sorting Genetic Algorithm [Volume 31, Issue 4, 2018, Pages 588-596]
-
Tavakkoli-Moghaddam, R
A New Multi-objective Model for Multi-mode Project Planning with Risk [Volume 31, Issue 5, 2018, Pages 770-779]
-
Tavakkoli-Moghaddam, R
Bi-objective Build-to-order Supply Chain Problem with Customer Utility [Volume 31, Issue 7, 2018, Pages 1066-1073]
-
Tavakkoli-Moghaddam, R
Cooperative Benefit and Cost Games under Fairness Concerns [Volume 31, Issue 8, 2018, Pages 1250-1257]
-
Tavakkoli-Moghaddam, R.
Performance Analysis of Dynamic and Static Facility Layouts in a Stochastic Environment [Volume 30, Issue 5, 2017, Pages 710-719]
-
Tavakkoli-Moghaddam, R.
Sustainable Supplier Selection by a New Hybrid Support Vector-model based on the Cuckoo Optimization Algorithm [Volume 30, Issue 6, 2017, Pages 867-875]
-
Tavakkoli-Moghaddam, R.
Detailed Scheduling of Tree-like Pipeline Networks with Multiple Refineries [Volume 30, Issue 12, 2017, Pages 1870-1878]
-
Tavakkoli-Moghaddam, R.
A Lagrangian Relaxation-based Algorithm to Solve a Home Health Care Routing Problem [Volume 31, Issue 10, 2018, Pages 1734-1740]
-
Tavakkoli-Moghaddam, R.
Truck Scheduling in a Cross-Docking Terminal by Using Novel Robust Heuristics [Volume 32, Issue 2, 2019, Pages 296-305]
-
Tavakkoli-Moghaddam, R.
Soft Computing-based New Interval-valued Pythagorean Triangular Fuzzy Multi-criteria Group Assessment Method without Aggregation: Application to a Transport Projects Appraisal [Volume 32, Issue 5, 2019, Pages 737-746]
-
Tavakkoli-Moghaddam, R.
A Two-Stage Green Supply Chain Network with a Carbon Emission Price by a Multi-objective Interior Search Algorithm [Volume 32, Issue 6, 2019, Pages 828-834]
-
Tavakkoli-Moghaddam, R.
A Green Competitive Vehicle Routing Problem under Uncertainty Solved by an Improved Differential Evolution Algorithm [Volume 32, Issue 7, 2019, Pages 976-981]
-
Tavakkoli-Moghaddam, R.
New Approaches in Meta-heuristics to Schedule Purposeful Inspections of Workshops in Manufacturing Supply Chains [Volume 33, Issue 5, 2020, Pages 833-840]
-
Tavakkoli-Moghaddam, R.
A Bi-level Meta-heuristic Approach for a Hazardous Waste Management Problem [Volume 33, Issue 7, 2020, Pages 1304-1310]
-
Tavakkoli-Moghaddam, R.
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Tavakkoli-Moghaddam, R.
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Tavakkoli-Moghaddam, R.
A Neutrosophic Fuzzy Programming Method to Solve a Multi-depot Vehicle Routing Model under Uncertainty during the COVID-19 Pandemic [Volume 35, Issue 2, 2022, Pages 360-371]
-
Tavakkoli-Moghaddam, R.
A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
-
Tavakkoli-Moghaddam, R.
A Bi-objective Model of Research and Development in Battery Manufacturing Industry to Improve Customer Satisfaction [Volume 35, Issue 11, 2022, Pages 2077-2091]
-
Tavakkoli-Moghaddam, R.
New Framework Based on a Multi-criteria Decision-making Model of Technology Transfer in the Auto-battery Manufacturing Industry under Uncertainty [Volume 35, Issue 10, 2022, Pages 2040-2055]
-
Tavakkoli-Moghaddam, R.
A Multi-objective Cash-in-transit Pollution-location-routing Problem Based on Urban Traffic Conditions [Volume 36, Issue 2, 2023, Pages 299-310]
-
Tavakkoli-Moghaddam, R.
Developing a Fuzzy Measurement of Alternatives and Ranking Compromise Solution Method for Determining Essential Barriers in Iranian Car Industry [Volume 36, Issue 1, 2023, Pages 90-97]
-
Tavakkoli-Moghaddam, R.
Integrated Linear Integer Model of a Fleet Allocation and Aircraft Routing Problem with Operational Constraints [Volume 36, Issue 4, 2023, Pages 669-681]
-
Tavakkoli-Moghaddam, R.
Bi-objective Economic Production Quantity with Partial Backordering under Uncertainty [Volume 37, Issue 7, 2024, Pages 1408-1421]
-
Tavakkoli-Moghaddam, R.
A Mathematical Model for Resource Sharing with Bilateral Contracts in a Supply Chain with Government Intervention under a Game Theory Approach [Volume 37, Issue 6, 2024, Pages 1175-1182]
-
Tavakkoli-Moghaddam, Reza
Mathematical Programming Models for Solving Unequal-Sized Facilities Layout Problems - a Generic Search Method [Volume 12, Issue 4, 1999, Pages 233-246]
-
Tavakkoli-Moghaddam, Reza
A Continuous Plane Model to Machine Layout Problems Considering Pick-Up and Drop-Off Points: An Evolutionary Algorithm [Volume 16, Issue 1, 2003, Pages 59-70]
-
Tavakkoli-Moghaddam, Reza
A Comprehensive Model for R and D Project Portfolio Selection with Zero-One Linear Goal-Programming (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 55-66]
-
Tavakkoli-Moghaddam, Reza
An Efficient Algorithm to Inter and Intra-Cell Layout Problems in Cellular Manufacturing Systems with Stochastic Demands [Volume 19, Issue 1, 2006, Pages 67-78]
-
Tavakkoli-Moghaddam, Reza
A Mathematical Model of a Multi-Criteria Parallel Machine Scheduling Problem: a Genetic Algorithm (RESEARCH NOTE) [Volume 19, Issue 1, 2006, Pages 79-86]
-
Tavakkoli-Moghaddam, Reza
A New ILP Model for Identical Parallel-Machine Scheduling with Family Setup Times Minimizing the Total Weighted Flow Time by a Genetic Algorithm [Volume 20, Issue 2, 2007, Pages 183-194]
-
Tavakkoli-Moghaddam, Reza
A Holistic Approach Based on MCDM for Solving Location Problems [Volume 20, Issue 3, 2007, Pages 251-262]
-
Tavakkoli-Moghaddam, Reza
A New Multi-Objective Model for Dynamic Cell Formation Problem with Fuzzy Parameters [Volume 21, Issue 2, 2008, Pages 159-172]
-
Tavakkoli-Moghaddam, Reza
Multi-Objective Unrelated Parallel Machines Scheduling with Sequence-Dependent Setup Times and Precedence Constraints [Volume 21, Issue 3, 2008, Pages 269-278]
-
Tavakkoli-Moghaddam, Reza
A New Bi-Objective Model for a Multi-Mode Resource-Constrained Project Scheduling Problem with Discounted Cash Flows and four Payment Models [Volume 21, Issue 4, 2008, Pages 347-360]
-
Tavakkoli-Moghaddam, Reza
A New Multi-Objective Model for a Cell Formation Problem Considering Machine Utilization and Alternative Process Routes (RESEARCH NOTE) [Volume 22, Issue 1, 2009, Pages 21-32]
-
Tavakkoli-Moghaddam, Reza
Solving a New Multi-Period Mathematical Model of the Rail-Car Fleet Size and Car Utilization by Simulated Annealing [Volume 22, Issue 1, 2009, Pages 33-46]
-
Tavakkoli-Moghaddam, Reza
A Novel B and B Algorithm for a Unrelated Parallel Machine Scheduling Problem to Minimize the Total Weighted Tardiness [Volume 22, Issue 3, 2009, Pages 269-286]
-
Tavakkoli-Moghaddam, Reza
A Tabu Search Method for a New Bi-Objective Open Shop Scheduling Problem by a Fuzzy Multi-Objective Decision Making Approach (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 269-282]
-
Tavakkoli-Moghaddam, Reza
A HYBRID GENETIC ALGORITHM FOR A BI-OBJECTIVE SCHEDULING PROBLEM IN A FLEXIBLE MANUFACTURING CELL [Volume 23, Issue 3, 2010, Pages 235-252]
-
Tavakkoli-Moghaddam, Reza
An integrated AHP-VIKOR methodology for plant location selection [Volume 24, Issue 2, 2011, Pages 127-137]
-
Tavakkoli-Moghaddam, Reza
Solving a new bi-objective model for a cell formation problem considering labor allocation by multi-objective particle swarm optimization [Volume 24, Issue 3, 2011, Pages 249-258]
-
Tavakkoli-Moghaddam, Reza
Solving a bi-objective manpower scheduling problem considering the utility of objective functions [Volume 24, Issue 3, 2011, Pages 251-262]
-
Tavakkoli-Moghaddam, Reza
A Facility Location Problem with Tchebychev Distance in the Presence of a Probabilistic Line Barrier [Volume 25, Issue 4, 2012, Pages 293-302]
-
Tavakkoli-Moghaddam, Reza
A Multi-objective Imperialist Competitive Algorithm for a Capacitated Single-allocation Hub Location Problem [Volume 26, Issue 6, 2013, Pages 605-620]
-
Tavakkoli-Moghaddam, Reza
Solving a Redundancy Allocation Problem by a Hybrid Multi-objective Imperialist Competitive Algorithm [Volume 26, Issue 9, 2013, Pages 1031-1042]
-
Tavakkoli-Moghaddam, Reza
Comparing Three Proposed Meta-heuristics to Solve a New p-hub Location-allocation Problem [Volume 26, Issue 9, 2013, Pages 1043-1058]
-
Tavakkoli-Moghaddam, Reza
Optimal Design of the Cross-docking in Distribution Networks: Heuristic Solution Approach [Volume 27, Issue 4, 2014, Pages 533-544]
-
Tavakkoli-Moghaddam, Reza
A Robust Model for a Dynamic Cellular Manufacturing System with Production Planning [Volume 27, Issue 4, 2014, Pages 587-598]
-
Tavakkoli-Moghaddam, Reza
Hierarchical Alpha-cut Fuzzy C-means, Fuzzy ARTMAP and Cox Regression Model for Customer Churn Prediction [Volume 27, Issue 9, 2014, Pages 1405-1414]
-
Tavakkoli-Moghaddam, Reza
Designing a Meta-Heuristic Algorithm Based on a Simple Seeking Logic [Volume 27, Issue 10, 2014, Pages 1601-1610]
-
Tavakkoli-Moghaddam, Reza
Design of a New Mathematical Model for Integrated Dynamic Cellular Manufacturing Systems and Production Planning [Volume 28, Issue 5, 2015, Pages 746-754]
-
Tavakkoli-Moghaddam, Reza
Group Decision Making based on a New Evaluation Method and Hesitant Fuzzy Setting with an Application to an Energy Planning Problem [Volume 28, Issue 9, 2015, Pages 1303-1311]
-
Tavakkoli-Moghaddam, Reza
A Quaternion Firefly Algorithm to Solve a Multi-row Facility Layout Problem (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1605-1613]
-
Tavakkoli-Moghaddam, Reza
Introducing the Time Value of Money in a Non-consignment Vendor Managed Inventory Model [Volume 29, Issue 5, 2016, Pages 637-645]
-
Tavakkoli-Moghaddam, Reza
Minimizing Makespan with Start Time Dependent Jobs in a Two Machine Flow Shop [Volume 29, Issue 6, 2016, Pages 778-787]
-
Tavakkoli-Moghaddam, Reza
Designing a Reliable Distribution Network with Facility Fortification and Transshipment under Partial and Complete Disruptions [Volume 29, Issue 9, 2016, Pages 1273-1281]
-
Tavakkoli-Moghaddam, Reza
Solving a New Multi-objective Unrelated Parallel Machines Scheduling Problem by Hybrid Teaching-learning Based Optimization [Volume 30, Issue 2, 2017, Pages 224-233]
-
Tavakkoli-Moghaddam, Reza
A Network Design Model for a Resilient Closed-Loop Supply Chain with Lateral Transshipment [Volume 30, Issue 3, 2017, Pages 374-383]
-
Tavakkoli-Moghaddam, Reza
A New Mathematical Model for a Multi-product Supply Chain Network with a Preventive Maintenance Policy [Volume 32, Issue 10, 2019, Pages 1446-1453]
-
Tavakkoli-Moghaddam, Reza
Designing a Model for Optimizing the Operation of Production Processes in Industry 4.0 [(Articles in Press)]
-
Tavakoli, A.
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Tavakoli, Behtash
Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
-
Tavakoli, D.
Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
-
Tavakoli, H. R.
Experimental Investigation of the Effects of using Waste Rubber Ash on Mechanical Properties of Plain Concrete [Volume 36, Issue 3, 2023, Pages 450-456]
-
Tavakoli, H. R.
The Post-fire Behavior of Lightweight Structural Concrete is Improved by Nano-SiO2 and Steel Fibers [Volume 36, Issue 11, 2023, Pages 1942-1960]
-
Tavakoli, J.
Characterization of Nd: Yag Laser Radiation Effects on Ti6Al4V Physico-Chemical Properties: An In Vivo Study [Volume 20, Issue 1, 2007, Pages 1-11]
-
Tavakoli, J.
Optimization of Control System of Petroleum Refinery Isomerization Unit by Plant-Wide Control Principles [Volume 32, Issue 7, 2019, Pages 901-907]
-
Tavakoli, M. B.
Improving 3-D Imaging Breast Cancer Diagnosis Systems Using a New Method for Placement of Near-infrared Sources and Detectors [Volume 33, Issue 6, 2020, Pages 1105-1113]
-
Tavakoli, O.
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Tavakoli, O.
Sugarcane Molasses as a Cost-effective Carbon Source on Arthrospira maxima Growth by Taguchi Technique [Volume 35, Issue 3, 2022, Pages 510-516]
-
Tavakolpour-Saleh, Alireza
Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
-
Tavakolpour-Saleh, A. R
Parameters Identification of an Experimental Vision-based Target Tracker Robot Using Genetic Algorithm [Volume 31, Issue 3, 2018, Pages 480-486]
-
Tavakolpour-Saleh, A. R.
Particle Swarm Optimization Based Parameter Identification Applied to a Target Tracker Robot with Flexible Joint [Volume 33, Issue 9, 2020, Pages 1797-1802]
-
Tavangar Roosta, Saeed
Modeling and Analysis of Viscous Dissipation Phenomenon on Temperature Distribution in the Process of Injection Explosive Fluid [Volume 29, Issue 6, 2016, Pages 862-869]
-
Tavassoli, A.
A Model for Scheduling of Electric Vehicles Charging in a Distribution Network using Multi-agent Model [Volume 37, Issue 2, 2024, Pages 402-411]
-
Tavassoli, Abdoreza
Preparation, Physiochemical and Kinetic Investigations of V2O5/SiO2 Catalyst for the Sulfuric Acid Production [Volume 29, Issue 11, 2016, Pages 1478-1488]
-
Tavassoli, F.
An Advanced Modulation Technique Featuring Common Mode Voltage Suppression for Three-Phase Neutral Point Clamped Back to Back Converters [Volume 35, Issue 11, 2022, Pages 2220-2228]
-
Tavoosi, J.
Neuro-fuzzy Modelling and Experimental Study of the Physiological Comfort of Green Cotton Fabric Based on Yarn Properties [Volume 33, Issue 12, 2020, Pages 2443-2449]
-
Tavoosi, J.
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Tawi, Kamarul
Computer Simulation Studies on the Effect Overlap Ratio for Savonius Type Vertical Axis Marine Current Turbine [Volume 23, Issue 1, 2010, Pages 79-88]
-
Tawi, Kamarul
Experimental Studies on Savonius-type Vertical Axis Turbine for Low Marine Current Velocity [Volume 26, Issue 1, 2013, Pages 91-98]
-
Tayari, E.
Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
-
Taybi, Mehdi
The Effect of Corrugations on Mechanical Sensitivity of Diaphragm for MEMS Capacitive Microphone [Volume 26, Issue 11, 2013, Pages 1323-1330]
-
Taybi, Mehdi
Accurate Model of Capacitance for MEMS Sensors using Corrugated Diaphragm with Residual Stress [Volume 27, Issue 1, 2014, Pages 63-68]
-
Tayebifard, Seyed Ali
Investigation of Phase Evolution of TiC-TiB2 Nanostructure Fabricated by MASHS (RESEARCH NOTE) [Volume 26, Issue 1, 2013, Pages 33-38]
-
Tayebifard, Seyed Ali
Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
-
Tayefeh Mahmoudi, M.
A Compositional Adaptation-based Approach for Recommending Learning Resources in Software Development [Volume 35, Issue 7, 2022, Pages 1317-1329]
-
Tayefeh Mahmoudi, M.
A Fuzzy Fusion Framework for Generating Purpose-oriented Texts [Volume 36, Issue 7, 2023, Pages 1219-1229]
-
Teekaraman, Yuvaraja
Implementation of Control Variables to Exploit Output Power for SRGs in Single Pulse Mode Operation [Volume 29, Issue 4, 2016, Pages 505-513]
-
Tehrani, F. T.
A Model of the Respiratory System in the Newborn Infant [Volume 4, Issue 3, 1991, Pages 101-106]
-
Tehranizadeh, M.
Ranking Passive Seismic Control Systems by Their Effectiveness in Reducing Responses of High-Rise Buildings with Concrete Shear Walls Using Multiple-Criteria Decision Making [Volume 33, Issue 8, 2020, Pages 1479-1490]
-
Teimouri, Fahimeh
Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
-
Teja Prathipati, S. R. R.
Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers [Volume 33, Issue 8, 2020, Pages 1465-1471]
-
Tensing, D
Seismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE) [Volume 32, Issue 11, 2019, Pages 1543-1547]
-
Tensing, D.
Experimental Investigation of Toughness Enhancement in Cement Mortar [Volume 31, Issue 11, 2018, Pages 1824-1829]
-
Tensing, D.
Enhancing Performance of Infill Masonry With Skin reinforcement Subjected To Cyclic Load [Volume 32, Issue 2, 2019, Pages 223-228]
-
Terchunyan, A
Purification and Characterization of a Novel Thermostable and Acid Stable α-Amylase from Bacillus Sp. Iranian S1 [Volume 26, Issue 8, 2013, Pages 815-820]
-
Tewari, P.C
Performance Modeling of Power Generation System of a Thermal Plant [Volume 24, Issue 3, 2011, Pages 239-248]
-
Tewari, P.C
Performance Optimization for Skim Milk Powder Unit of a Dairy Plant Using Genetic Algorithm [Volume 25, Issue 3, 2012, Pages 211-222]
-
Tewari, S. P.
Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions [Volume 30, Issue 4, 2017, Pages 597-603]
-
Tewari, S. P.
Effect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints [Volume 30, Issue 10, 2017, Pages 1592-1598]
-
Teymoori, V.
Development of Linear Vernier Hybrid Permanent Magnet Machine for Wave Energy Converter [Volume 33, Issue 5, 2020, Pages 805-813]
-
Teymourtash, A. R.
Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
-
Tezcan, H. O.
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Tezcan, H. O.
Joint Logit Model Approach to Analyze Soccer Spectators’ Arrival Time and Location Preferences for Interim Activities in Istanbul [Volume 35, Issue 4, 2022, Pages 613-625]
-
TEZCAN, Hüseyin Onur
Application of Discrete 3-level Nested Logit Model in Travel Demand Forecasting as an Alternative to Traditional 4-Step Model [Volume 32, Issue 10, 2019, Pages 1416-1428]
-
Thabah, S. Diamond
Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
-
Thai, N. H.
A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
-
Thakur, B.
Aspects of Foundation-soil Interaction of Nuclear Structures under Seismic Conditions through the State-of-art Review [Volume 35, Issue 9, 2022, Pages 1716-1722]
-
Thakur, G
An Experimental Study of Nanofluids Operated Shell and Tube Heat Exchanger with Air Bubble Injection [Volume 31, Issue 1, 2018, Pages 136-143]
-
Thakur, M
An Experimental Study of Nanofluids Operated Shell and Tube Heat Exchanger with Air Bubble Injection [Volume 31, Issue 1, 2018, Pages 136-143]
-
Thakur, M.
An Experimental Study on Thermophysical Properties of Multiwalled Carbon Nanotubes (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1223-1230]
-
Thang, V. L.
An Application of Artificial Neural Network to Predict the Compressive Strength of Concrete using Fly Ash and Stone Powder Waste Products in Central Vietnam [Volume 35, Issue 5, 2022, Pages 967-976]
-
Thanh, B. D.
A Comparative Analysis of Axial and Radial Forces in Windings of Amorphous Core Transformers [Volume 37, Issue 1, 2024, Pages 201-212]
-
Thanh Tung, N.
Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
-
Thanh Tung, N.
Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle [Volume 35, Issue 8, 2022, Pages 1571-1578]
-
Thanoon, W.A.M
Numerical Modeling of Railway Track Supporting System using Finite-Infinite and Thin Layer Elements [Volume 22, Issue 2, 2009, Pages 131-144]
-
Thepade, S. D.
Enhanced Face Presentation Attack Prevention Employing Feature Fusion of Pre-trained Deep Convolutional Neural Network Model and Thepade's Sorted Block Truncation Coding [Volume 36, Issue 4, 2023, Pages 807-816]
-
Thien, N. V.
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Thipse, S. S.
Emission Reduction Strategies for Small Single Cylinder Diesel Engine Using Valve Timing and Swirl Ratio [Volume 33, Issue 8, 2020, Pages 1608-1619]
-
Thiyaneswaran, M. P.
Performance Studies on Glass Fiber Reinforced Recycled Aggregate Concrete [Volume 36, Issue 5, 2023, Pages 904-913]
-
Thoma, Yann
On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
-
Thomas, P. J.
Can the History Force be Neglected for the Motion of Particles at High Subcritical Reynolds Number Range? [Volume 19, Issue 1, 2006, Pages 23-34]
-
Thomas, P. J.
Development of a Low Cost and Safe PIV for Mean Flow Velocity and Reynolds Stress Measurements [Volume 20, Issue 2, 2007, Pages 105-116]
-
Thongchom, C.
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Thrinath, G.
Eco-friendly Self-curing Concrete Incorporated with Polyethylene Glycol as Self-curing Agent (RESEARCH NOTE) [Volume 30, Issue 4, 2017, Pages 473-478]
-
Thyagaraj, T.
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Tian, Guangdong
Addressing a Coordinated Quay Crane Scheduling and Assignment Problem by Red Deer Algorithm [Volume 32, Issue 8, 2019, Pages 1186-1191]
-
Tian, H.
Integral Evaluation of Implementation Efficiency of Automated Hardware Complex for Vehicle Traffic Control [Volume 37, Issue 8, 2024, Pages 1534-1546]
-
Tian, Jun
Experimental Modeling of a Long Orifice-type Restrictor of High Speed Turbine Hybrid Bearing [Volume 29, Issue 3, 2016, Pages 378-385]
-
Tianlai, Y.
Investigation and Analysis of Empirical Field Seismic Damage to Bottom Frame Seismic Wall Masonry Structure [Volume 32, Issue 8, 2019, Pages 1082-1089]
-
Tiara, T
The Effect of Air Fuel Ratio and Temperature on Syngas Composition and Calorific Value Produced from Downdraft Gasifier of Rubber Wood-Coal Mixture [Volume 31, Issue 9, 2018, Pages 1480-1486]
-
Timarchi, S.
Improved Distributed Particle Filter Architecture with Novel Resampling Algorithm for Signal Tracking [Volume 33, Issue 12, 2020, Pages 2482-2488]
-
Tiong, Patrick
Seismic Performance of Low-Ductility Precast Wall Structure with Base Isolation [Volume 26, Issue 2, 2013, Pages 153-162]
-
Titouche, N.
Experimental Investigation of Friction Pressure Influence on the Characterizations of Friction Welding Joint for AISI 316 [Volume 33, Issue 12, 2020, Pages 2514-2520]
-
Titouche, N.
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Tiwan, H.
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Tizhoosh, H. R.
A Radon-based Convolutional Neural Network for Medical Image Retrieval [Volume 31, Issue 6, 2018, Pages 910-915]
-
Tjaronge, M. W.
Performance of Prefabricated Foam Concrete as Infilled Wall Under Cyclic Lateral Loading [Volume 35, Issue 2, 2022, Pages 337-343]
-
Tjaronge, M. W.
Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
-
Tjaronge, M. W.
Basic Engineering Properties of Concrete with Refractory Brick as Coarse Aggregate: Compressive Stress-Time Relationship Assessment [Volume 37, Issue 5, 2024, Pages 931-940]
-
Tkouti, N.
A New Modified Bacterial Foraging MPPT Technique with Dynamic Mutation Rates for Photovoltaic Systems under Partial Shading Conditions [Volume 37, Issue 8, 2024, Pages 1569-1579]
-
Toemen, S
Biodiesel Production via Transesterification of Low Grade Cooking Oil over Heterostructure Nano Particles of Ni/Mg/Al2O3 Catalyst [Volume 31, Issue 8, 2018, Pages 1318-1325]
-
Tofigh, Ali Asghar
APPLICATION OF GAME THEORY IN DYNAMIC COMPETITIVE PRICING WITH ONE PRICE LEADER AND N DEPENDENT FOLLOWERS [Volume 25, Issue 1, 2012, Pages 35-44]
-
Tofigh, Ali Asghar
A New Nonlinear Multi-objective Redundancy Allocation Model with the Choice of Redundancy Strategy Solved by the Compromise Programming Approach [Volume 27, Issue 4, 2014, Pages 545-552]
-
Tofigh, Ali Asghar
Redundancy Allocation Combined with Supplier Selection for Design of Series-parallel Systems [Volume 28, Issue 5, 2015, Pages 730-737]
-
Tofigh, Ali Asghar
A New Model for Fleet Assignment Problem, Case Study of Iran Air Network at Vision 2036 [Volume 28, Issue 11, 2015, Pages 1614-1623]
-
Toghraei, M.
Electrodeposited Co-Pi Catalyst on α-Fe2O3 Photoanode for Water-Splitting Applications [Volume 31, Issue 12, 2018, Pages 2085-2091]
-
Tohidi, M.
Experimental Study of the Combined Use of Fiber and Nano Silica Particles on the Properties of Lightweight Self Compacting Concrete [Volume 33, Issue 8, 2020, Pages 1499-1511]
-
Tohidi, M.
Retrofitting of Reinforced Concrete Beams using Lightweight RC Jacket Containing Silica Nano Particles and Glass Fiber [Volume 35, Issue 11, 2022, Pages 2164-2175]
-
Tohidi, Nina
Using Neural Networks and Genetic Algorithms for Modelling and Multi-objective Optimal Heat Exchange through a Tube Bank [Volume 25, Issue 4, 2012, Pages 321-326]
-
Tohidi, S.
Sensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives [Volume 31, Issue 9, 2018, Pages 1536-1545]
-
Tohidi, S.H
Preparation and Study of Molecular Structure of Copper Ions Doped in a Silica Xerogel Matrix [Volume 19, Issue 1, 2006, Pages 53-60]
-
Tohidi, S.H
Preparation and Characterization of SiO2-CaCl2 Nanocomposite by the Sol-Gel Method [Volume 22, Issue 3, 2009, Pages 299-305]
-
Tohidi, S.H
Comparison Nanostructure Behaviour of Copper Species on the Silicamatrix Xerogels [Volume 24, Issue 2, 2011, Pages 147-153]
-
Tohidi, S.H
EFFECT OF INORGANIC HYBRID LiBr ON THE SILICA MATRIX XEROGELS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 51-56]
-
Tohidi, S.H
Selective Catalytic Reduction of CuO/SiO2 Nano-composites towards NO Reduction in Gas-phase [Volume 27, Issue 12, 2014, Pages 1913-1919]
-
Toloei, A
Performance Evaluation of the High-altitude Launch Technique to Orbit Using Atmospheric Properties [Volume 26, Issue 4, 2013, Pages 333-340]
-
Toloei, A.
Quaternion-based Finite-time Sliding Mode Controller Design for Attitude Tracking of a Rigid Spacecraft during High-thrust Orbital Maneuver in the Presence of Disturbance Torques [Volume 32, Issue 3, 2019, Pages 430-437]
-
Toloei, A.
Distributed Fuzzy Adaptive Sliding Mode Formation for Nonlinear Multi-quadrotor Systems [Volume 33, Issue 5, 2020, Pages 798-804]
-
Toloei, A.
Quadrotor Control for Tracking Moving Target, and Dynamic Obstacle Avoidance Based on Potential Field Method [Volume 36, Issue 10, 2023, Pages 1720-1732]
-
Toloei, A.
Formation Control and Obstacle Avoidance of a Multi-Quadrotor System Based on Model Predictive Control and Improved Artificial Potential Field [Volume 37, Issue 1, 2024, Pages 115-126]
-
Toloei, Alireza
Improving the performance of flight control system in the presence of uncertainties and extreme changes in parameters using multiple model adaptive control [(Articles in Press)]
-
Toloei, A. R.
Design of Generalized Predictive Control for the Stabilizing Loop from a two-axis Gimbal Seeker, Considering Cross-Coupling in Between two Channels [Volume 32, Issue 4, 2019, Pages 555-561]
-
Toloei, A.R.
Simulation of Store Separation using Low-cost CFD with Dynamic Meshing [Volume 27, Issue 5, 2014, Pages 775-784]
-
Toloei, A.R.
Analysis of Transient Flow in the Case of Secondary Injection for Transient Vector Control (RESEARCH NOTE) [Volume 29, Issue 6, 2016, Pages 809-816]
-
Toloei, A.R.
Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE) [Volume 29, Issue 9, 2016, Pages 1300-1306]
-
Toloei, A.R.
Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
-
Toloie Eshlaghy, A.
A Proposed Model for Persian Stance Detection on Social Media [Volume 36, Issue 6, 2023, Pages 1048-1059]
-
Toloie-Eshlaghy, A
A New Multi-objective Model for Multi-mode Project Planning with Risk [Volume 31, Issue 5, 2018, Pages 770-779]
-
Tolou Askari, M.
Identification of Combined Power Quality Disturbances in the Presence of Distributed Generations using Variational Mode Decomposition and K-nearest Neighbors Classifier [Volume 35, Issue 4, 2022, Pages 657-674]
-
Tolou-Askari, M.
Challenges of Generation and Transmission Expansion Planning Considering Power System Resilience and Provide Solutions [Volume 36, Issue 5, 2023, Pages 824-841]
-
Tolou-Askari, M.
Market-based Real Time Congestion Management in a Smart Grid Considering Reconfiguration and Switching Cost [Volume 36, Issue 5, 2023, Pages 842-857]
-
Tomar, Ravindra
A New Trans-admittance-Mode Biquad Filter Suitable for Low Voltage Operation [Volume 28, Issue 12, 2015, Pages 1738-1745]
-
Tomlison, K.W.
Application of a One-Dimensional Computer Model to Flood Routing in Narrow Rivers [Volume 6, Issue 1, 1993, Pages 9-14]
-
Tong, X.
The Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 175-179]
-
Tongliang, W.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
-
Tontowi, A. E.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Tontowi, A. E.
Synthesis of Hydroxyapatite Bioceramic from Cuttlefish Shell Waste and Coral Using Microwave Hydrothermal [Volume 37, Issue 9, 2024, Pages 1755-1762]
-
Toocharoen, S.
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Toofan, S.
A Temperature Compensation Voltage Controlled Oscillator Using a Complementary to Absolute Temperature Voltage Reference [Volume 32, Issue 5, 2019, Pages 710-719]
-
Toolabi, Goodarz
Investigation of Entropy Generation Through the Operation of an Unlooped Pulsating Heat Pipe [Volume 29, Issue 8, 2016, Pages 1151-1159]
-
Tooshmalani, Mohtaram
Predicting Shear Stress Distribution in Rectangular Channels Using Entropy Concept [Volume 28, Issue 3, 2015, Pages 360-367]
-
Torabi, A.
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Torabi, K.
Variational Iteration Method for Free Vibration Analysis of a Timoshenko Beam under Various Boundary Conditions [Volume 30, Issue 10, 2017, Pages 1565-1572]
-
Torabi, M.
Electrochemical Deposition of Flower-Like Nickel Nanostructures on Well-Defined n-Si (111):H [Volume 21, Issue 2, 2008, Pages 177-182]
-
Torabi, M.
Electrochemical Evaluation of PbO Nanoparticles as Anode for Lithium Ion Batteries (Technical Note) [Volume 24, Issue 4, 2011, Pages 351-356]
-
Torabi, Mansour
Multi-objective Optimization of a Projectile Tip for Normal Penetration [Volume 26, Issue 10, 2013, Pages 1225-1234]
-
Torabi, N.
A Two-Stage Green Supply Chain Network with a Carbon Emission Price by a Multi-objective Interior Search Algorithm [Volume 32, Issue 6, 2019, Pages 828-834]
-
Torabi, Navid
A Quaternion Firefly Algorithm to Solve a Multi-row Facility Layout Problem (RESEARCH NOTE) [Volume 28, Issue 11, 2015, Pages 1605-1613]
-
Torabi, S. A.
The Finite Horizon Economic Lot Scheduling in Flexible Flow Lines [Volume 18, Issue 3, 2005, Pages 273-284]
-
Torabi, S. A.
Finite Horizon Economic Lot and Delivery Scheduling Problem: Flexible Flow Lines with Unrelated Parallel Machines and Sequence Dependent Setups [Volume 21, Issue 2, 2008, Pages 143-158]
-
Torabi, S. A.
A Basic Period Approach for Solving the Economic Lot and Delivery Scheduling in Flexible Flow Lines [Volume 21, Issue 4, 2008, Pages 361-374]
-
Torabi, S. A.
A Fuzzy Multi Objective Programming Model for Power Generation and Transmission Expansion Planning Problem [Volume 23, Issue 1, 2010, Pages 29-39]
-
Torabi, S. A.
A Common Weight Data Envelopment Analysis Approach for Material Selection [Volume 28, Issue 6, 2015, Pages 913-921]
-
Torabi, S. A.
A Common Weight Multi-criteria Decision analysis-data Envelopment Analysis Approach with Assurance Region for Weight Derivation from Pairwise Comparison Matrices [Volume 28, Issue 12, 2015, Pages 1746-1755]
-
Torabi, S. A.
Multi-Objective Vehicle Routing Problem for a Mixed Fleet of Electric and Conventional Vehicles with Time Windows and Recharging Stations [Volume 35, Issue 12, 2022, Pages 2359-2369]
-
Torabi-M, M.
Cooperative Co-Evolving Neural Networks for Robosoccer Simulation [Volume 18, Issue 2, 2005, Pages 207-218]
-
Torab-Mostaedi, M.
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Torab-Mostaedi, Meisam
Experimental Investigation of Flooding and Drop Size in a Kuhni Extraction Column [Volume 29, Issue 3, 2016, Pages 288-296]
-
Torab-Mostaedi, Meisam
Studies of Drop Behavior and Prediction of Sauter Mean Drop Diameter in Various Rotary Agitated Extraction Columns [Volume 29, Issue 8, 2016, Pages 1047-1055]
-
Torab-Mostaedi, Meisam
Extraction of Molybdenum (VI) and Vanadium (V) from Nitrate Solutions Using Coupling of Acid and Solvating Extractants (RESEARCH NOTE) [Volume 32, Issue 10, 2019, Pages 1366-1371]
-
Torang, Arezo
Acrylamide Reduction in Potato Crisps using: Asparaginase from Candida utilis, Commercial Asparaginase, Salt Immersion, and pH Treatment [Volume 29, Issue 7, 2016, Pages 879-886]
-
Torba, D. I.
Investigation of Barium Sulfate Precipitation and Prevention Using Different Scale Inhibitors under Reservoir Conditions [Volume 31, Issue 10, 2018, Pages 1796-1802]
-
Torkaman, A.
A Hybrid Approach to Detect Researchers’ Communities Based on Deep Learning and Game Theory [Volume 36, Issue 11, 2023, Pages 2052-2062]
-
Torkaman, H.
Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
-
Torkaman, R.
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Torkaman, Rezvan
Studies of Drop Behavior and Prediction of Sauter Mean Drop Diameter in Various Rotary Agitated Extraction Columns [Volume 29, Issue 8, 2016, Pages 1047-1055]
-
Torkashvand, K.
Air Plasma Sprayed Bond Coat Oxidation Behavior and its Resistance to Isothermal and Thermal Shock Loading [Volume 32, Issue 6, 2019, Pages 872-876]
-
Torkashvand, M.
Distributed Production Assembly Scheduling with Hybrid Flowshop in Assembly Stage [Volume 35, Issue 5, 2022, Pages 1037-1055]
-
Torkashvand, M.
The Equipment Scheduling and Assignment Problem in the Overhaul Industry [Volume 36, Issue 6, 2023, Pages 1150-1165]
-
Torkian, A.
Treatability Evaluation of Municipal Wastewater and Anaerobically-Treated Industrial Effluent in a Rotating Biological Contactor [Volume 16, Issue 2, 2003, Pages 143-154]
-
Torknik, F. S.
Transmission Electron Microscopy Sample Preparation of INCONEL 738 Nickel-Base Superalloy [Volume 32, Issue 6, 2019, Pages 852-859]
-
Torkzadeh, L.
Analytical Solution of Electromagnetic Force on Nanofluid Flow with Brownian Motion Effects Between Parallel Disks [Volume 35, Issue 8, 2022, Pages 1651-1661]
-
Torkzadeh, P
Evaluation of Seismic Behavior of Steel Moment Resisting Frames Considering Nonlinear Soil-structure Interaction [Volume 31, Issue 7, 2018, Pages 1020-1027]
-
Torkzadeh, P.
Stiffness-based Approach for Preliminary Design of Framed Tube Structures [Volume 30, Issue 11, 2017, Pages 1664-1672]
-
Toropchina, Maria
The potential application of saponite clay for the production of drilling fluids [(Articles in Press)]
-
Torres, E. A.
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
Torres, E. A.
Control of Formation of Intermetallic Compound in Dissimilar Joints Aluminum-steel [Volume 32, Issue 1, 2019, Pages 127-136]
-
Toufigh, Mohammad Mohsen
Seepage with Nonlinear Permeability by Least Square FEM [Volume 15, Issue 2, 2002, Pages 125-134]
-
Toufigh, V
Influence of Curing Time and Water Content on Unconfined Compressive Strength of Sand Stabilized Using Epoxy Resin [Volume 31, Issue 8, 2018, Pages 1187-1195]
-
Touil, S.
Optimization Using a Genetic Algorithm Based on DFIG Power Supply for the Electrical Grid [Volume 35, Issue 1, 2022, Pages 121-129]
-
Toumi, D.
A Proposed Approach for Separation between Short Circuit Fault, Magnetic Saturation Phenomenon and Supply Unbalance in Permanent Magnet Synchronous Motor [Volume 33, Issue 10, 2020, Pages 1968-1977]
-
Tousi, B
Application of an Additive Self-tuning Controller for Static Synchronous Series Compensator for Damping of Sub-synchronous Resonance Oscillations [Volume 31, Issue 4, 2018, Pages 564-573]
-
Tousi, B.
Probabilistic Reactive Power Flow Optimization of Distribution System in Presence of Distributed Units Uncertainty Using Combination of Improved Taguchi Method and Dandelion Algorithm [Volume 37, Issue 1, 2024, Pages 37-47]
-
Tousi, B.
Improving Reliability of Active Distribution Networks Using Probabilistic Assessment of Renewable Resource Units [Volume 37, Issue 9, 2024, Pages 1780-1789]
-
Tousi, Behrouz
Transformer-based Single-source Multilevel Inverter with Reduction in Number of Transformers [Volume 29, Issue 5, 2016, Pages 621-629]
-
Tousi, Behrouz
Using Dynamic Thermal Rating and Energy Storage Systems Technologies Simultaneously for Optimal Integration and Utilization of Renewable Energy Sources [Volume 33, Issue 1, 2020, Pages 92-104]
-
Toutounchi, A.R.
Computer Simulation of the Performances of Solar Ponds in Iran (RESEARCH NOTE). [Volume 5, Issue 3, 1992, Pages 141-144]
-
Towfighi Darian, J.
Estimation of Kinetic Parameters of Coking Reaction Rate in Pyrolysis of Naphtha [Volume 17, Issue 4, 2004, Pages 319-332]
-
Towhidi, N.
Reoxidation Rate of Sponge Iron Pellets, Briquettes and Iron Powder Compressed to Various Compressions in Air [Volume 1, Issue 2, 1988, Pages 111-116]
-
Towsyfyan, Hossein
The Comparison of Imperialist Competitive Algorithm Applied and Genetic Algorithm for Machining Allocation of Clutch Assembly (TECHNICAL NOTE) [Volume 26, Issue 12, 2013, Pages 1485-1494]
-
Tran, B. H.
In-situ Fine Basalt Soil Reinforced by Cement Combined with Additive DZ33 to Construct Rural Roads in Gia Lai Province, Vietnam [Volume 33, Issue 11, 2020, Pages 2137-2145]
-
Traore, Philippe
Numerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection [Volume 28, Issue 9, 2015, Pages 1343-1350]
-
Triatmadja, R.
Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
-
Tri Mardiani, Dini
Microwave Pretreatment of Fresh Water Hyacinth (Eichhornia Crassipes) in Batch Anaerobic Digestion Tank (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 832-840]
-
Trimulyono, A.
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
TRIPATHI, RAKESH
EOQ Model with Cash Flow Oriented and Quantity Dependent Under Trade Credits (TECHNICAL NOTE) [Volume 27, Issue 7, 2014, Pages 1107-1112]
-
TRIPATHI, RAKESH
Economic Order Quantity for Deteriorating Items with Non Decreasing Demand and Shortages Under Inflation and Time Discounting [Volume 28, Issue 9, 2015, Pages 1295-1302]
-
Trivedi, Ashutosh
Behavior of Model Circular Footings on Silty Soils with Cellular Supports [Volume 23, Issue 1, 2010, Pages 21-36]
-
Triwardono, J.
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Triwardono, J.
Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia [Volume 37, Issue 1, 2024, Pages 167-177]
-
Triwikantoro, T.
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
-
Triwikantoro, T.
Structural, Optical and Defect State Analyses of ZnO Nanoparticle Films [Volume 33, Issue 5, 2020, Pages 852-860]
-
Trung, N. T.
A Novel Curve for the Generation of the Non-circular Gear Tooth Profile [Volume 35, Issue 5, 2022, Pages 1024-1036]
-
Truong, D. V
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Truong Cong, T.
Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
-
Trushko, O. V.
Construction of Underground and Multi-story Car Parks in High-density Urban Areas [Volume 37, Issue 2, 2024, Pages 224-236]
-
Trushko, V. L.
Construction of Underground and Multi-story Car Parks in High-density Urban Areas [Volume 37, Issue 2, 2024, Pages 224-236]
-
Tsigelnyuk, E. Y.
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Tuc, B.
Effect of Coating Materials on Wear in Internal Gears [Volume 30, Issue 11, 2017, Pages 1792-1799]
-
Tuchinda, K.
Computational Study of Excitation Controlling Parameters Effect on Uniform Beam Deformation under Vibration [Volume 36, Issue 1, 2023, Pages 60-70]
-
Tuchinda, K.
Development of Temperature-strain Prediction Based on Deformation-induced Heating Mechanism in SCM440 Surface Cracked Shaft under Ultrasonic Excitation [Volume 37, Issue 1, 2024, Pages 151-166]
-
Tuchinda, K.
Computational Framework Development to Investigate Al Matrix with Low-Velocity Impact Behavior at Varied Temperatures for Cold Spray Composite Coating Design: Al/TiN Case [Volume 37, Issue 4, 2024, Pages 804-817]
-
Tumengkol, H. A.
Precast Concrete Column Beam Connection Using Dowels Due to Cyclic Load [Volume 35, Issue 1, 2022, Pages 102-111]
-
TUMMALA, AYYARAO SLV
Tuning of Extended Kalman Filter using Self-adaptive Differential Evolution Algorithm for Sensorless Permanent Magnet Synchronous Motor Drive [Volume 29, Issue 11, 2016, Pages 1565-1573]
-
Tumpu, M.
Influence of Tensile Load on Bonding Strength of Asphalt Concrete Containing Modified Buton Asphalt and Polyethylene Terephthalate Waste: A Case Study of Indonesian Roads [Volume 35, Issue 9, 2022, Pages 1779-1786]
-
Turbakov, M. S.
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Turbakov, M. S.
Influence of Frequency of Wave Action on Oil Production [Volume 35, Issue 11, 2022, Pages 2072-2076]
-
Turkane, S. D.
Partial Replacement of Conventional Material with Stabilized Soil in Flexible Pavement Design [Volume 35, Issue 5, 2022, Pages 908-916]
-
Turmuzi, M.
Variations of Organic Loading Rate on Tofu Wastewater Degradation using Upflow Anaerobic Sludge Blanket Reactor by Modified Stover-Kincannon Model [Volume 36, Issue 3, 2023, Pages 490-496]
-
Tuswan, T.
Experimental Evaluation on Palm Oil and Sesame Oil-based Resin Properties as Core Sandwich Material for Lightweight Ship Structure [Volume 35, Issue 9, 2022, Pages 1690-1698]
U
-
Ubale, Amol
Experimental and Theoretical Study of Thompson Seedless Grapes Drying using Solar Evacuated Tube Collector with Force Convection Method [Volume 28, Issue 12, 2015, Pages 1796-1801]
-
Udawat, Amit
Optimization Capabilities of LMS and SMI Algorithm for Smart Antenna Systems (RESEARCH NOTE) [Volume 26, Issue 11, 2013, Pages 1393-1400]
-
Udhiarto, A.
Characteristics of PANi/rGO Nanocomposite as Protective Coating and Catalyst in Dye-sensitized Solar Cell Counter Electrode Deposited on AISI 1086 Steel Substrate [Volume 31, Issue 10, 2018, Pages 1741-1748]
-
Ulya, H. N.
Partial Enzymatic Hydrolysis of Glucomannan and Its Mathematical Model [Volume 36, Issue 12, 2023, Pages 2214-2221]
-
Ulya, H. N.
Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
-
Umair, M.
Probabilistic Damage Analysis of Isolated Steel Tub Girder Bridge Excited by Near and Far Fault Ground Motions [Volume 36, Issue 2, 2023, Pages 289-298]
-
Umar, R.
Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]
-
Umpuch, Chakkrit
Batch Adsorption of Organic Dyes by Organo-bagasse: Carbon Content, pH Influence, Kinetics and Isotherms (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 507-515]
-
Umravia, N. B.
Numerical Analysis to Study Lateral Behavior of Cement Fly Ash Gravel Piles under the Soft Soil [Volume 35, Issue 11, 2022, Pages 2111-2119]
-
Unes, Unes
Single Machine Scheduling Problem with Precedence Constraints and Deteriorating Jobs [Volume 24, Issue 2, 2011, Pages 115-122]
-
Unfried-Silgado, J.
A Coupled Rigid-viscoplastic Numerical Modeling for Evaluating Effects of Shoulder Geometry on Friction Stir-welded Aluminum Alloys [Volume 32, Issue 2, 2019, Pages 313-321]
-
Unfried-Silgado, J.
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
UNIYAL, AMIT
EOQ Model with Cash Flow Oriented and Quantity Dependent Under Trade Credits (TECHNICAL NOTE) [Volume 27, Issue 7, 2014, Pages 1107-1112]
-
Unyong, B.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Upegi, Andres
On Feasibility of Adaptive Level Hardware Evolution for Emergent Fault Tolerant Communication [Volume 27, Issue 1, 2014, Pages 101-112]
-
Urazbakhtin, R. Y.
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Uribe, Vivian
Web Control and Monitoring System: Experimentation with Haematococcus Pluvialis (TECHNICAL NOTE) [Volume 26, Issue 3, 2013, Pages 219-228]
-
Usman Latief, R.
Study on the Application of Sustainable Construction in the Development of the Likupang Special Economic Zone [Volume 36, Issue 1, 2023, Pages 50-59]
-
Uspechov, A. M.
Investigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE) [Volume 32, Issue 5, 2019, Pages 790-793]
-
Ustinov, Denis
Using artificial neural network methods to increase the sensitivity of distance protection [(Articles in Press)]
-
Utama, J.
Efficient Sampling-based for Mobile Robot Path Planning in a Dynamic Environment Based on the Rapidly-exploring Random Tree and a Rule-template Sets [Volume 36, Issue 4, 2023, Pages 797-806]
-
Utama, J.
Pupil Center Detection Using Radial Symmetry Transform to Measure Pupil Distance in the Eye [Volume 36, Issue 5, 2023, Pages 870-878]
-
Utama, M. E. W
Characterization and Utilization of Zeolite for NPK Slow Release Fertilizer (RESEARCH NOTE) [Volume 31, Issue 4, 2018, Pages 622-628]
V
-
Vadivel, R.
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Vaezi, F.
A Robust Knapsack Based Constrained Portfolio Optimization [Volume 33, Issue 5, 2020, Pages 841-851]
-
Vaezi, M.
Effects of Brace-viscous Damper System on the Dynamic Response of Steel Frames [Volume 33, Issue 5, 2020, Pages 720-731]
-
Vaezi, M.
Evaluation of Corrosion Resistance of Bi-layered Plasma-sprayed Coating on Titanium Implants [Volume 35, Issue 4, 2022, Pages 635-643]
-
Vaezi, M. R.
Investigating the Effect of Ultrasound Intensity on the Magnetic Properties of Magnetite Nanostructures Synthesized by Sonochemical Method [Volume 36, Issue 6, 2023, Pages 1034-1039]
-
Vaezi, M.R.
Effects of Surface Modification on the Recovery Time and Stability of Nanostructured Tin Oxide Thick Films Gas Sensors [Volume 20, Issue 3, 2007, Pages 275-282]
-
Vaezi, M.R.
Particles Size Distribution Effect on 3d Packing of Nanoparticles Into a Bounded Region [Volume 20, Issue 3, 2007, Pages 281-291]
-
Vaezi, M.R.
Two-Stage Chemical Deposition of Oxide Films [Volume 21, Issue 1, 2008, Pages 65-70]
-
Vaezi, M.R.
Log-Normal and Mono-Sized Particles’ Packing into a Bounded Region [Volume 22, Issue 1, 2009, Pages 57-62]
-
Vaezi, M.R.
Thermodynamic Evaluation of Adsorption of Zinc Complex and ZnO Nano-Layer Prepared by TSCD Method Based on Langmuir Adsorption Model [Volume 22, Issue 2, 2009, Pages 179-184]
-
Vaezi, M.R.
Synthesise of CoFe2O4-Polyaniline Nanocomposite and Evaluation of its Magnetic Properties [Volume 22, Issue 4, 2009, Pages 381-386]
-
Vaezi, M.R.
Preparation of Cobalt Oxide/Zinc Oxide Nanocomposite [Volume 23, Issue 2, 2010, Pages 133-138]
-
Vaezi, M.R.
Effects of the pH of Initial Solution on Hydrothermally Synthesized TiO2 Nanoparticles [Volume 25, Issue 2, 2012, Pages 131-136]
-
Vaezi, M.R.
Wall Effect in 3D Simulation Of Same Sized Particles Packing [Volume 25, Issue 2, 2012, Pages 137-142]
-
Vaezi, M.R.
Synthesis of Al2O3-ZrO2 Nanocomposite by Mechanical Activated Self-propagating High Temperature Synthesis(MASHS) and Ignited via Laser [Volume 27, Issue 4, 2014, Pages 615-620]
-
Vaezi, M.R.
Synthesis of Zinc Oxide Nanostructured Thin Film by Sol- Gel Method and Evaluation of Gas Sensing Properties [Volume 27, Issue 5, 2014, Pages 757-762]
-
Vaez Zadeh, S.
On Line Determination of Optimal Hysteresis Band Amplitudes in Direct Torque Control of Induction Motor Drives [Volume 15, Issue 4, 2002, Pages 329-338]
-
Vaez Zadeh, S.
Permanent Magnet DC Motor Sliding Mode Control System [Volume 16, Issue 4, 2003, Pages 367-376]
-
Vafaee, F.
Genomic Ancestry Inference of Admixed Population by Identifying Approximate Boundaries of Ancestry Change [Volume 37, Issue 2, 2024, Pages 412-424]
-
Vafaeian, M.
Relationship Between Ground Settlement Due to Tunnelling and Ground Physico-mechanical Peroperties (RESEARCH NOTES) [Volume 9, Issue 1, 1996, Pages 45-49]
-
Vafaeian, M.
Applicability of Elastic Analysis for Predicting the Settlement Distribution Around Tunneling in Soft Ground (TECHNICAL NOTE) [Volume 16, Issue 3, 2003, Pages 217-234]
-
Vafaeian, M.
A Parametric Study of the Behavior of Geosynthetic Reinforced Soil Slopes [Volume 18, Issue 4, 2005, Pages 371-389]
-
Vafaeian, M.
Laboratory Model Tests to Study the Behavior of Soil Wall Reinforced by Weak Reinforcing Layers [Volume 21, Issue 4, 2008, Pages 361-374]
-
Vafaeian, M.
A Continuum Shell-beam Finite Element Modeling of Buried Pipes with 90-degree Elbow Subjected to Earthquake Excitations [Volume 28, Issue 3, 2015, Pages 338-349]
-
Vafaie-Sefti, M.
Compositional Modeling of Wax Formation in Petroleum Mixtures [Volume 14, Issue 4, 2001, Pages 303-312]
-
Vafapour, M.
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Vagh, A. S.
An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It [Volume 37, Issue 3, 2024, Pages 556-566]
-
Vahabzadeh, F.
Microencapsulation of Orange Oil by Complex Coacervation and its Release Behavior (REASEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 333-342]
-
Vahdani, B.
Optimal Design of the Cross-docking in Distribution Networks: Heuristic Solution Approach [Volume 27, Issue 4, 2014, Pages 533-544]
-
Vahdani, M.
Prediction of Mechanical Properties of Frozen Soils Using Response Surface Method: An Optimization Approach [Volume 33, Issue 10, 2020, Pages 1826-1841]
-
Vahdani, R.
Effects of Multiple Structure-soil-structure Interactions Considering the Earthquake Waveform and Structures Elevation Effects [Volume 33, Issue 5, 2020, Pages 744-752]
-
Vahdat, Seyed Mohammad
Chemical Composition, Antibacterial and Analgesic Activity of Lavandula stoechas Flowers from North of Iran [Volume 32, Issue 8, 2019, Pages 1065-1073]
-
Vahdati khaki, J.
Preparation of Porous Alumina/Nano-Nickel Composite by Gel Casting and Carbothermic Reduction [Volume 35, Issue 1, 2022, Pages 220-227]
-
Vahdati Khaki, Jalil
Effect of Composition and MnS Addition on Microstructure and Mechanical Properties of Powder Forged Copper Steel Parts [Volume 17, Issue 1, 2004, Pages 81-94]
-
Vahdati Khaki, Jalil
Corrosion Behavior of a Fe-25at%Sn Supersaturated Solid Solution in H3PO4 Solution [Volume 25, Issue 2, 2012, Pages 127-134]
-
Vahdat-Nejad, Hamed
Speed Detection in Wind-Tunnels by processing Schlieren Images (RESEARCH NOTE) [Volume 29, Issue 7, 2016, Pages 962-967]
-
Vahdaty, H.
Channel Estimation and Carrier Frequency Offset Compensation in Orthogonal Frequency Division Multiplexing System Using Adaptive Filters in Wavelet Transform Domain [Volume 33, Issue 7, 2020, Pages 1231-1239]
-
Vahdatzad, M. A.
Designing a Model for Creation of Export Consortiain Business Cluster [Volume 33, Issue 3, 2020, Pages 459-467]
-
Vahdatzad, Mohammad Ali
A Comprehensive Mathematical Model for a Location-routing-inventory Problem under Uncertain Demand: a Numerical Illustration in Cash-in-transit Sector [Volume 32, Issue 11, 2019, Pages 1634-1642]
-
Vahdat Zad, Mohammad Ali
A New Acceptance Sampling Design Using Bayesian Modeling and Backwards Induction [Volume 25, Issue 1, 2012, Pages 45-54]
-
Vahdat-Zad, M. A.
Developing the Inventory Routing Problem with Backhauls, Heterogeneous Fleet and Split Service [Volume 31, Issue 6, 2018, Pages 949-958]
-
Vahdat-Zad, Mohammad Ali
Deterministic and Metaheuristic Solutions for Closed-loop Supply Chains with Continuous Price Decrease [Volume 27, Issue 12, 2014, Pages 1897-1906]
-
Vahedi, A.
Design and Optimization of the Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor with High-Torque Density and Low-cost [Volume 37, Issue 7, 2024, Pages 1357-1368]
-
Vahedian, B.
Toward Energy-efficient Communication Protocol in WBAN: A Dynamic Scheduling Policy Approach [Volume 35, Issue 1, 2022, Pages 191-200]
-
Vahidi, B.
Lightning Protection of Ehv Substations in Iran [Volume 2, Issue 3, 1989, Pages 104-111]
-
Vahidi, B.
In Silico Analysis of Stem Cells Mechanical Stimulations for Mechnoregulation Toward Cardiomyocytes [Volume 35, Issue 11, 2022, Pages 2229-2237]
-
Vahidi, J.
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Vahidi, M.
The Effect of Heat on the Settlement Properties of Cement-stabilized Clay Soil [Volume 35, Issue 5, 2022, Pages 1056-1063]
-
Vajdian, M.
Predicting Shear Capacity of Panel Zone Using Neural Network and Genetic Algorithm [Volume 33, Issue 8, 2020, Pages 1512-1521]
-
Vajdian, M.
Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
-
Vakhin, A. V.
Relaxation Process in Crude Oil after Ultrasonic Treatment [Volume 37, Issue 5, 2024, Pages 896-903]
-
Vakilian, Fateme
Isotonic Change Point Estimation in the AR(1) Autocorrelated Simple Linear Profiles [Volume 28, Issue 7, 2015, Pages 1059-1067]
-
Vakilifard, Hamidreza
Conceptual Design of Sustainable Outsourcing with Balanced Scorecard Using Analytic Hierarchy Process: A Case Study for Fajr Jam Gas Refining Company [Volume 33, Issue 1, 2020, Pages 112-123]
-
Valencia, A
Hardware in Loop of a Generalized Predictive Controller for a Micro Grid DC System of Renewable Energy Sources [Volume 31, Issue 8, 2018, Pages 1215-1221]
-
Valencia, Daniel
Web Control and Monitoring System: Experimentation with Haematococcus Pluvialis (TECHNICAL NOTE) [Volume 26, Issue 3, 2013, Pages 219-228]
-
Valery, S.
Calibrating and Validation Microscopic Traffic Simulation Models VISSIM for Enhanced Highway Capacity Planning [Volume 36, Issue 8, 2023, Pages 1509-1519]
-
Vali, Ahmad Reza
Modeling, Control and Simulation of Cascade Control Servo System for one Axis Gimbal Mechanism [Volume 27, Issue 1, 2014, Pages 157-170]
-
Vali, A. R.
Performance Evaluation of the High-altitude Launch Technique to Orbit Using Atmospheric Properties [Volume 26, Issue 4, 2013, Pages 333-340]
-
Vali, A. R.
Effects of Flight Dynamics on Performance of One Axis Gimbal System, Considering Disturbance Torques [Volume 28, Issue 8, 2015, Pages 1108-1116]
-
Vali, M.
A Framework for Analysis of Predictors of Mobile-marketing Use by Expanding Unified Theory of Acceptance and Use of Technology and Artificial Neural Networks [Volume 36, Issue 5, 2023, Pages 1012-1022]
-
Vali, Mohammad Hossein
Designinga Neuro-Sliding Mode Controller for Networked Control Systems with Packet Dropout [Volume 29, Issue 4, 2016, Pages 490-499]
-
Valinataj, M.
Reversible Logic Multipliers: Novel Low-cost Parity-Preserving Designs [Volume 32, Issue 3, 2019, Pages 381-392]
-
Valinataj, M.
An Enhanced Self-checking Carry Select Adder Utilizing the Concept of Self-checking Full Adder [Volume 34, Issue 2, 2021, Pages 433-442]
-
Valinejad, F.
A Hybrid Model for Supply Chain Risk Management Based on Five-dimensional Sustainability Approach in Telecommunication Industry [Volume 35, Issue 6, 2022, Pages 1096-1110]
-
Valinejad, J.
Stochastic Unit Commitment in the Presence of Demand Response Program under Uncertainties [Volume 30, Issue 8, 2017, Pages 1134-1143]
-
Valiollahi, S
A Simple General-purpose I-V Model for All Operating Modes of Deep Submicron MOSFETs [Volume 31, Issue 2, 2018, Pages 270-277]
-
Valiollahi, Sepideh
A Q-learning Based Continuous Tuning of Fuzzy Wall Tracking [Volume 25, Issue 4, 2012, Pages 355-366]
-
Valipour, M. S
Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron [Volume 31, Issue 8, 2018, Pages 1274-1282]
-
Valipouri, Afsaneh
Investigating the Effect of Underlying Fabric on the Bagging Behaviour of Denim Fabrics (RESEARCH NOTE) [Volume 32, Issue 9, 2019, Pages 1231-1237]
-
Valizadeh, Ali
Improvement of Navigation Accuracy using Tightly Coupled Kalman Filter [Volume 30, Issue 2, 2017, Pages 215-223]
-
Valizadeh, Hadi
Experimental Investigation on Cyclic Behavior of Butterfly-shaped Links Steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1559-1569]
-
Valizadeh, M.
A Proposed Improved Hybrid Hill Climbing Algorithm with the Capability of Local Search for Solving the Nonlinear Economic Load Dispatch Problem [Volume 33, Issue 4, 2020, Pages 575-585]
-
Valizadeh, Reza
A New Technique for Image Zooming Based on the Moving Least Squares [Volume 25, Issue 2, 2012, Pages 105-110]
-
Valizadeh, S.
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Valnev, V.
Augmented Reality System and Maintenance of Oil Pumps [Volume 33, Issue 8, 2020, Pages 1620-1628]
-
Vamsi Krishna Raj, P.
The Ensemble of Unsupervised Incremental Learning Algorithm for Time Series Data [Volume 35, Issue 2, 2022, Pages 319-326]
-
Vanaei, P.
Efficiency Optimization Thermal Analysis and Power Output of a Modified Incinerator Plant Using Organic Rankine Cycle [Volume 36, Issue 7, 2023, Pages 1300-1309]
-
Vanarotti, M. B.
Experimental Investigation and Numerical Simulation of Air Circulation in a Non-AC Bus Coach System [Volume 35, Issue 3, 2022, Pages 572-579]
-
Van Bronswijk, W.
Electrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel [Volume 4, Issue 1, 1991, Pages 53-64]
-
Van Hoten, H
Parameters Optimization in Manufacturing Nanopowder Bioceramics of Eggshell with Pulverisette 6 Machine using Taguchi and ANOVA Method (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 45-49]
-
Vanu Madhav, V. V.
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Van Van, L.
Effect of Suspension System Stiffness on Dynamic Load Action Chassis Multi-purpose Forest Fire Fighting Vehicle [Volume 35, Issue 8, 2022, Pages 1571-1578]
-
Varahram, A.
Optimization of Array Factor in Linear Arrays Using Modified Genetic Algorithm [Volume 17, Issue 4, 2004, Pages 367-380]
-
Varghese, A.
Influence of Fiber on Shear Behavior of Concrete Exposed to Elevated Temperature [Volume 33, Issue 10, 2020, Pages 1897-1903]
-
Varhraam, N
Computer Simulation of Equidxed Eutectic Solidifiction of Metals [Volume 12, Issue 4, 1999, Pages 247-258]
-
Varmazyar, M.
Experimental and Numerical Analysis of Permeability in Porous Media [Volume 33, Issue 11, 2020, Pages 2408-2415]
-
Varmazyar, Mostafa
Buoyancy Term Evolution in the Multi Relaxation Time Model of Lattice Boltzmann Method with Variable Thermal Conductivity Using a Modified Set of Boundary Conditions [Volume 30, Issue 9, 2017, Pages 1408-1416]
-
Vasanwala, S.
Experimental Study of Lateral Loading on Piled Raft Foundations on Sandy Soil [Volume 36, Issue 1, 2023, Pages 28-34]
-
Vaseei, Masoud
Developing a Data Envelopment Analysis Model for a Smart Sustainable Multi-Echelon Supply Chain Using Natural, Managerial, and Free Disposal Hulls: An Approach using Bootstrap Simulation [(Articles in Press)]
-
Vasegh, N.
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Vaseghi, Zahra
A comparison on Lipase Production from Soybean meal and Sugarcane Bagasse in Solid State Fermentation using Rhizopus oryzae [Volume 27, Issue 2, 2014, Pages 171-176]
-
Vaseghi Amiri, J.
Experimental Study on Compressive Behavior of Concrete-filled Double-skin Circular Tubes with Active Confinement [Volume 35, Issue 4, 2022, Pages 819-829]
-
Vasiya, V.
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Vasseghi, A.
Design Requirements for Plate Girders with Bolted Transverse Stiffeners (TECHNICAL NOTE) [Volume 18, Issue 1, 2005, Pages 21-26]
-
Vasseghi, A.
Design Requirements for Plate Girders with Bolted Transverse Stiffeners [Volume 18, Issue 1, 2005, Pages 65-71]
-
Vasseghi, A.
Effect of Link Slab on Seismic Response of Two Span Straight and Skew Bridges [Volume 21, Issue 3, 2008, Pages 257-266]
-
Vatandoost, M
Seismic Retrofitting RC Structures with Precast Prestressed Concrete Braces- ABAQUS FEA Modeling [Volume 31, Issue 3, 2018, Pages 394-404]
-
Vatandoost, M.
Topology and Thickness Optimization of Concrete Thin Shell Structures Based on Weight, Deflection, and Strain Energy [Volume 37, Issue 7, 2024, Pages 1369-1383]
-
Vatani, Behdad
A Robust Model for a Dynamic Cellular Manufacturing System with Production Planning [Volume 27, Issue 4, 2014, Pages 587-598]
-
Vatani, M.
Experimental Examination of Gas-liquid Two-phase Flow Patterns in an Inclined Rectangular Channel with 90° Bend for Various Vertical Lengths [Volume 35, Issue 4, 2022, Pages 685-691]
-
Vazifeh-Shenas, S.
Efficient Metaheuristic Algorithms for a Robust and Sustainable Water Supply and Wastewater Collection System [Volume 35, Issue 7, 2022, Pages 1440-1456]
-
Vazifeshenas, Yousef
Investigation of Thermo-hydraulic Performance of Circular Tube Fitted with Center-cleared Twisted Tape Using CFD Modeling (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 476-482]
-
Vazifeshenas, Yousef
Numerical Simulation of Cavitation in Mixed Flow Pump [Volume 28, Issue 6, 2015, Pages 956-963]
-
Vaziri, M.
Taxonomy of Global Air Transport [Volume 6, Issue 4, 1993, Pages 147-158]
-
Vaziri, M.
Traffic Flow Characteristics of Isolated Off-ramps in Iranian Expressways [Volume 11, Issue 3, 1998, Pages 135-146]
-
Vaziri, M.
Benchmarking Sustainability with Respect to Transportation Supply and Demand [Volume 17, Issue 4, 2004, Pages 357-368]
-
Vaziri, M.
A Comparative Appraisal of Roadway Accident for Asia-Pacific Countries [Volume 23, Issue 2, 2010, Pages 111-126]
-
Vaziri Astaneh, A.
A Collocation Method with Modified Equilibrium on Line Method for Imposition of Neumann and Robin Boundary Conditions in Acoustics (TECHNICAL NOTE) [Volume 23, Issue 1, 2010, Pages 11-22]
-
Vedanarayanan, V.
Multi-label Text Categorization using Error-correcting Output Coding with Weighted Probability [Volume 35, Issue 8, 2022, Pages 1516-1523]
-
Veda Spandana, V
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Veladi, Hedayat
Experimental Investigation on Cyclic Behavior of Butterfly-shaped Links Steel Plate Shear Walls [Volume 32, Issue 11, 2019, Pages 1559-1569]
-
Velu, Chandran
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance [Volume 28, Issue 6, 2015, Pages 932-939]
-
Vemana Chary, D.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Vemana Chary, D.
Improved Performance Analysis and Design of Dual Metal Gate FinFET for Low Power Digital Applications [Volume 37, Issue 6, 2024, Pages 1059-1066]
-
Vengadeswaran, N.
Effect of Tool Rotational Speed on the Tensile and Microstructural Properties of Friction Stir Welded Different Grades of Stainless Steel Joints [Volume 33, Issue 1, 2020, Pages 141-147]
-
Venkatarami Reddy, D.
Performance Analysis of High-K Dielectric Heterojunction High Electron Mobility Transistor for RF Applications [Volume 36, Issue 9, 2023, Pages 1652-1658]
-
Venkatarami Reddy, D.
Design and Performance Analysis of 6H-SiC Metal-Semiconductor Field-Effect Transistor with Undoped and Recessed Area under Gate in 10nm Technology [Volume 36, Issue 12, 2023, Pages 2264-2271]
-
Venkata Vishnu, A.
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Venkateswarlu, K
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Venkateswarlu, K.
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Venugopal, K.
Experimental Modal Analysis of Radiator Fan Module to Predict its Influence of Structural Characteristics on Vibration and Noise Contribution [Volume 35, Issue 8, 2022, Pages 1479-1487]
-
Venukanan, T.
Comparison of Experimentally and Theoretically Determined Infiltration in Coarse Textured Soil [Volume 31, Issue 6, 2018, Pages 886-893]
-
Venu Madhav, V. V.
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Verbitsky, Michael
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Verbitsky, Vladimir
Analyzing The Efficiency Of Joint Operation Of Gas Separator And Screw Pump On High-Viscosity Gas-Liquid Mixture [(Articles in Press)]
-
Verma, D. K.
Experimental Study of Breaching of an Earthen Dam using a Fuse Plug Model [Volume 30, Issue 4, 2017, Pages 479-485]
-
Verma, D.V.S.
New Stilling Basins Designs for Deep Rectangular Outlets [Volume 17, Issue 1, 2004, Pages 1-10]
-
Verma, D.V.S.
Constriction Scour In Pressurized Flow Condition (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 237-246]
-
Verma, D.V.S.
Determination of Principal Permeabilities in Two-Dimensional Fissured Rocks Using Permeability Circle (TECHNICAL NOTE) [Volume 17, Issue 4, 2004, Pages 357-362]
-
Vetrivel, K.
Effect of Tool Rotational Speed on the Tensile and Microstructural Properties of Friction Stir Welded Different Grades of Stainless Steel Joints [Volume 33, Issue 1, 2020, Pages 141-147]
-
Veysi, F.
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Veysi, Sadjad
Numerical Modeling of the Stepped Planing Hull in Calm Water [Volume 29, Issue 2, 2016, Pages 236-245]
-
Vidia Putra, V. G.
Effect of Current Density on Magnetic and Hardness Properties of Ni-Cu Alloy Coated on Al via Electrodeposition [Volume 37, Issue 2, 2024, Pages 213-223]
-
Vignesh Amar, S.
Effect of Tool Rotational Speed on the Tensile and Microstructural Properties of Friction Stir Welded Different Grades of Stainless Steel Joints [Volume 33, Issue 1, 2020, Pages 141-147]
-
Vijayapal Reddy, P.
A Document Weighted Approach for Gender and Age Prediction Based on Term Weight Measure [Volume 30, Issue 5, 2017, Pages 643-651]
-
Vikram Kumar, Ch R.
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Vincent Sam Jebadurai, S.
Enhancing Performance of Infill Masonry With Skin reinforcement Subjected To Cyclic Load [Volume 32, Issue 2, 2019, Pages 223-228]
-
Vincent Sam Jebadurai, S.
Experimental Study on Compressive Strength of Brick Using Natural Fibres [Volume 32, Issue 6, 2019, Pages 799-804]
-
Vipin, .
Surface Roughness in Abrasive Mixed Rotary Electrical Discharge Machining: Experimental Approach [Volume 35, Issue 7, 2022, Pages 1355-1364]
-
Vishnu Vardhan, B.
A Document Weighted Approach for Gender and Age Prediction Based on Term Weight Measure [Volume 30, Issue 5, 2017, Pages 643-651]
-
Vishwanath, T. S.
Intelligent Controllers to Extract Maximum Power for 10 KW Photovoltaic System [Volume 35, Issue 4, 2022, Pages 784-793]
-
Vivekananda Sharma, S.
Numerical and Experimental Investigation on Small Scale Magnetorheological Damper [Volume 35, Issue 12, 2022, Pages 2395-2402]
-
Vladan, Babovic
Enhanced Predictions of Tides and Surges through Data Assimilation (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 23-29]
-
Volkov, Aleksandr
Evaluation of strength properties of cement containing NaCl in mixing water for cementing wells in halite strata [(Articles in Press)]
-
Von, Woei Chew
Effects of Compactor Types on Aggregate Orientation of Asphalt Mixtures [Volume 26, Issue 7, 2013, Pages 677-684]
-
Voosoghi, B.
Fixing of Cycle Slips in Dual-Frequency GPS Phase Observables using Discrete Wavelet Transforms [Volume 21, Issue 1, 2008, Pages 9-26]
-
Vorontsov, A. A.
Analysis of Nucleation Time of Gas Hydrates in Presence of Paraffin During Mechanized Oil Production [Volume 37, Issue 7, 2024, Pages 1343-1356]
-
Vosough, M.
Co-TiO2 Nanoparticles as the Reinforcement for Fe Soft Magnetic Composites with Enhanced Mechanical and Magnetic Properties via Pulse Electrodeposition [Volume 33, Issue 10, 2020, Pages 2030-2038]
-
Vossoughi, Amin
Encapsulation of Food Components and Bioactive Ingredients and Targeted Release [Volume 33, Issue 1, 2020, Pages 1-11]
-
Vossoughi, Gholam Reza
Effect of Target Impedance Selection on the Lower Extremity Assistive Exoskeleton Performance [Volume 29, Issue 6, 2016, Pages 843-851]
-
Vossoughi, M.
Treatment of Dairy Wastewater Using Pilot Scale Tricking Filter [Volume 5, Issue 3, 1992, Pages 77-80]
-
Vossoughi, M.
The Mechanism of Chromium Biosorption by Saccharomyces Cerevisiae [Volume 10, Issue 3, 1997, Pages 121-126]
-
Vossoughi, M.
Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
-
Vossoughi, M.
Coupled Anaerobic Baffled Reactor (ABR)/Activated Sludge Treatment of Synthetic Wastewater with High Concentration of Sulfate and COD [Volume 16, Issue 1, 2003, Pages 11-20]
-
Vossoughi, M.
Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 1-8]
-
Vossoughi, M.
Some Investigation on Bioremediation of Sediment in Persian Gulf Coast (RESEARCH NOTE) [Volume 18, Issue 1, 2005, Pages 45-53]
-
Vossoughi, M.
Optimization of HFDS Production from Date Syrup (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 127-134]
-
Vossoughi, M.
THE PRODUCTION OF GLUCOAMYLASE BY ASPERGILLUS NIGER UNDER SOLID STATE CONDITIONS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 1-8]
-
Vossoughi, M.
Influence of Glycerol and Clay Contents on Biodegradability of Corn Starch Nanocomposites [Volume 27, Issue 2, 2014, Pages 203-214]
-
Vossoughi Shahvari, Fariborz
Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers [Volume 24, Issue 1, 2011, Pages 1-18]
-
Vostrikov, Nikita
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Vo Thanh, H.
Analytical Modelling of a Six-Phase Surface Mounted Permanent Magnet Synchronous Motor [Volume 37, Issue 7, 2024, Pages 1274-1283]
-
Voué, M.
Effect of Mg Addition on Morphology, Roughness and Adhesion of Cr Chromized Layer Produced by Pack Cementation [Volume 36, Issue 10, 2023, Pages 1773-1782]
-
Voynarenko, M. P.
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Vu Ngo, N.
Study on Multi-objects Optimization in EDM with Nickel Coated Electrode using Taguchi-AHP-Topsis [Volume 35, Issue 2, 2022, Pages 276-282]
-
Vyas, A.
Metallurgical and Mechanical Properties of Laser Cladded AlFeCuCrCoNi-WC10 High Entropy Alloy Coating [Volume 33, Issue 7, 2020, Pages 1397-1402]
-
Vyatkin, K
Performance Evaluation of Oily Waste Treatment Ways (TECHNICAL NOTE) [Volume 31, Issue 3, 2018, Pages 511-515]
-
Vyatkin, K. A.
Influence of Geological and Technological Parameters on Effectiveness of Hydrochloric Acid Treatment of Carbonate Reservoirs [Volume 33, Issue 10, 2020, Pages 2113-2119]
-
Vyatkin, K. A.
Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation [Volume 35, Issue 6, 2022, Pages 1178-1185]
W
-
Wadhwa, A. S.
Investigation and Optimization of Tribological Aspects of Babbitt-Ilmenite Composite using Weighted Grey Relation Analysis [Volume 36, Issue 5, 2023, Pages 894-903]
-
Wagih, Ahmed
Effect of Mechanical Milling on the Morphologyand Structural Evaluation of Al-Al2O3 Nanocomposite Powders [Volume 27, Issue 4, 2014, Pages 625-632]
-
Wagih, Ahmed
Experimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction [Volume 29, Issue 1, 2016, Pages 78-86]
-
Wahhab, M. S.
Digital Communication Based on Image Security using Grasshopper Optimization and Chaotic Map [Volume 35, Issue 10, 2022, Pages 1981-1988]
-
Wahit, Mat Uzir
Tensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types [Volume 29, Issue 9, 2016, Pages 1257-1262]
-
Wahyudi, Slamet
Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
-
Wahyudin, W.
Use of Quality Function Deployment for Gold Mining Feasibility Study (Case Study: Designing Explosive Storage Area) [Volume 33, Issue 5, 2020, Pages 825-832]
-
Wahyunggoro, O.
Enhancing Low-Pass Filter Energy Management with Adaptive State of Charge Limiter for Hybrid Energy Storage in Electric Vehicles [Volume 37, Issue 8, 2024, Pages 1486-1499]
-
Wahyuono, Ruri
Mesoporous WO3/TiO2 Nanocomposites Photocatalyst for Rapid Degradation of Methylene Blue in Aqueous Medium [Volume 32, Issue 10, 2019, Pages 1345-1352]
-
Wai, K. P
Improving Hydrophilicity of Polyethersulfone Membrane Using Silver Nanoparticles for Humic Substances Removal [Volume 31, Issue 8, 2018, Pages 1364-1372]
-
Wainwright, M.S.
Phase-Transformation of Gamma-Allumina to Alpha-Alumina as an Industrial Catalyst Support [Volume 4, Issue 1, 1991, Pages 1-12]
-
Waleed Jummah, N.
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Wami, E. N.
Fluidization of Initialty Segregased Equidensity Binary System [Volume 9, Issue 2, 1996, Pages 1-7]
-
Wan, Chunhao
The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
-
Wan Azelee, I
Nanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation [Volume 31, Issue 8, 2018, Pages 1446-1454]
-
Wan Badaruzzaman, Wan Hamidon
Finite Element Prediction of the Behavior of Profiled Steel Sheet Dry Board Folded Plate Structures an Improved Model (RESEARCH NOTE) [Volume 16, Issue 1, 2003, Pages 21-32]
-
Wan Badaruzzaman, Wan Hamidon
Performance of Infilled Profiled Steel Sheet Dry Board PSSDB Load Bearing Wall (TECHNICAL NOTE) [Volume 17, Issue 4, 2004, Pages 343-348]
-
Wang, B.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Wang, C.
An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
-
Wang, C.
Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
-
Wang, D.
Improved Adaptive Median Filter Algorithm for Removing Impulse Noise from Grayscale Images [Volume 30, Issue 10, 2017, Pages 1503-1509]
-
Wang, F.
A Fault Diagnosis Method for Automaton Based on Morphological Component Analysis and Ensemble Empirical Mode Decomposition [Volume 32, Issue 6, 2019, Pages 877-883]
-
Wang, F.
A Fault Diagnosis Method for Automaton based on Morphological Component Analysis and Ensemble Empirical Mode Decomposition [Volume 32, Issue 7, 2019, Pages 1010-1016]
-
Wang, H.
Drilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly [Volume 30, Issue 11, 2017, Pages 1800-1806]
-
Wang, H.
Comparison of Two Computational Microstructure Models for Predicting Effective Transverse Elastic Properties of Unidirectional Fiber Reinforced Composites [Volume 31, Issue 9, 2018, Pages 1498-1504]
-
Wang, Hua
Intelligent Health Evaluation Method of Slewing Bearing Adopting Multiple Types of Signals from Monitoring System [Volume 28, Issue 4, 2015, Pages 573-582]
-
Wang, Li
Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
-
Wang, Q.
Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
-
Wang, Shenwen
Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
-
Wang, Xungai
Mechanical Properties of Irregular Fiber (Invited Review Paper) [Volume 16, Issue 1, 2003, Pages 99-108]
-
Wang, Xungai
Modeling the Tensile Behavior of Fibers with Geometrical and Structural Irregularities [Volume 16, Issue 4, 2003, Pages 393-412]
-
Wang, Yaonan
Flexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot [Volume 24, Issue 4, 2011, Pages 377-386]
-
Wang, Youming
Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography [Volume 27, Issue 11, 2014, Pages 1723-1730]
-
Wang, Youming
Experimental Modeling of a Long Orifice-type Restrictor of High Speed Turbine Hybrid Bearing [Volume 29, Issue 3, 2016, Pages 378-385]
-
Wang, Z.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Wani, S. B.
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Wardhani, D. H.
Partial Enzymatic Hydrolysis of Glucomannan and Its Mathematical Model [Volume 36, Issue 12, 2023, Pages 2214-2221]
-
Wardhani, D. H.
Performances of Amphiphilic Glucomannan Produced by Combination Methods of Ultrasonication, Deacetylation, and Carboxymethylation Heterogeneously [Volume 37, Issue 2, 2024, Pages 377-386]
-
Watson, J. O.
Elestoplastic Analysis of Barrier Pillars Above the Drifts in Inclined Seam (TECHNICAL NOTES) [Volume 12, Issue 2, 1999, Pages 113-122]
-
Wei, Kai
Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
-
Wei, Y. J.
Lattice Boltzmann Method Application on Headwater at Lata Kinjang Waterfall, Malaysia [Volume 33, Issue 5, 2020, Pages 760-769]
-
Wei, Yongqiao
Vibration Characteristics of Heavy Load Rackwith Split-hom together Structure (RESEARCH NOTE) [Volume 28, Issue 2, 2015, Pages 277-283]
-
Wei, Z.
Effects of Deceleration on Secondary Collisions between Adult Occupants and the Vehicle in Frontal Crash Accidents [Volume 34, Issue 12, 2021, Pages 2658-2664]
-
Wei-Hua, S.
Research on Safety Risk of Dangerous Chemicals Road Transportation Based on Dynamic Fault Tree and Bayesian Network Hybrid Method (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1144-1151]
-
Wickramaarachchi, T. N.
Comparison of Experimentally and Theoretically Determined Infiltration in Coarse Textured Soil [Volume 31, Issue 6, 2018, Pages 886-893]
-
WIdayat, Widayat
Ultrasound Assisted In Situ Esterification of Rubber Seeds Oil for Biodiesel Production (RESEARCH NOTE) [Volume 29, Issue 12, 2016, Pages 1635-1641]
-
Widhiyanuriawan, Denny
Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
-
Widiastuti, M. G.
Synthesis of Hydroxyapatite Bioceramic from Cuttlefish Shell Waste and Coral Using Microwave Hydrothermal [Volume 37, Issue 9, 2024, Pages 1755-1762]
-
Widiastuti, Nurul
Mesoporous WO3/TiO2 Nanocomposites Photocatalyst for Rapid Degradation of Methylene Blue in Aqueous Medium [Volume 32, Issue 10, 2019, Pages 1345-1352]
-
Widiyandari, H.
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Widiyandari, Hendri
Mesoporous WO3/TiO2 Nanocomposites Photocatalyst for Rapid Degradation of Methylene Blue in Aqueous Medium [Volume 32, Issue 10, 2019, Pages 1345-1352]
-
Widiyanto, Yusuf Aji
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Widyastuti, M. G.
Process Parameter Optimization of 3D-Printer Machine Using Response Surface Method for Printing Hydroxyapatite/Collagen Composite Slurry [Volume 36, Issue 11, 2023, Pages 1961-1971]
-
Wijaya, A. A.
Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
-
Wildan, M. W.
Synthesis of Silica Nanoparticles from Silica Sand via Vibration Assisted Alkaline Solution Method [Volume 35, Issue 7, 2022, Pages 1300-1306]
-
Wilson, David
An Experimental Investigation of Bridgeflow II Kerb Channel Units [Volume 15, Issue 1, 2002, Pages 23-40]
-
Winter, G
The Effect of Various Parameters on Out-of-phase Thermo-mechanical Fatigue Lifetime of A356.0 Cast Aluminum Alloy [Volume 26, Issue 12, 2013, Pages 1461-1470]
-
Winursioto, Isananto
Influence of Concentration of Copper Electrolyte, Voltage, and Time of Electroforming on Conductive Acrylonitrile Butadiene Styrene Parts on Deposition Rate and Microstructure [(Articles in Press)]
-
Wirakusuma, Arief
Adsorption Performance of Low-cost Java Plum Leaves and Guava Fruits as Natural Adsorbents for Removal of Free Fatty Acids from Coconut Oil [Volume 32, Issue 10, 2019, Pages 1372-1378]
-
Wirawan, Wirawan
Simulation Study: The Role of Area to Volume Ratio and Key Parameters in Cylindrical Micro Combustors [Volume 28, Issue 2, 2015, Pages 261-269]
-
Wong, S
Synthesis and Characterization of CaO-TiO2 for Transesterification of Vegetable Palm Oil [Volume 31, Issue 8, 2018, Pages 1326-1333]
-
Wong, S. K.
A Reliable and Economically Feasible Automatic Meter Reading System Using Power Line Distribution Network (TECHNICAL NOTE) [Volume 18, Issue 3, 2005, Pages 301-318]
-
Wu, ChuanSong
Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam (TECHNICAL NOTE) [Volume 32, Issue 10, 2019, Pages 1480-1484]
-
Wu, Jin-xing
Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
-
Wu, K.
Design and Parameters Optimization of Pteris vittata Automatic Sowing Machine for Phytoremediation [Volume 33, Issue 4, 2020, Pages 694-701]
-
Wu, Kang
Microscopic Structures Analysis and Experimental Research of Beak [Volume 29, Issue 7, 2016, Pages 940-945]
-
Wu, L.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
-
Wu, Qing
Experimental Detection of Composite Delamination Damage based on Ultrasonic Infrared Thermography [Volume 27, Issue 11, 2014, Pages 1723-1730]
-
Wu, Y.
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Wu, Z.
Probe-Fed Rectangular Dielectric Resonator Antennas,Theoretical Modeling and Experiments [Volume 16, Issue 1, 2003, Pages 41-46]
-
Wu, Z.
Numerical Modeling and Experimental Study of Probe-Fed Rectangular Dielectric Resonator Antenna (RDRA) Supported by Finite Circular Ground Plane [Volume 17, Issue 3, 2004, Pages 269-280]
-
Wu, Z. H.
Numerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection [Volume 33, Issue 7, 2020, Pages 1403-1412]
-
Wu, Zhe
Parameters Design and Economy Study of an Electric Vehicle with Powertrain Systems in Front and Rear Axle [Volume 29, Issue 4, 2016, Pages 454-463]
-
Wuyin, J.
Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
X
-
Xia, F. C.
Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
-
Xiao, H.
Rolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm [Volume 32, Issue 1, 2019, Pages 121-126]
-
Xiao-ping, B.
Research on Safety Risk of Dangerous Chemicals Road Transportation Based on Dynamic Fault Tree and Bayesian Network Hybrid Method (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1144-1151]
-
Xiaoping, L.
Study on Rheological Property Control Method of “Three High” Water Based Drilling Fluid [Volume 33, Issue 8, 2020, Pages 1687-1695]
-
Xie, X.
Application of Ultra-sensitive Pillar-enhanced Quartz Crystal Resonators for Airborne Detection of Nanoparticles: A Theoretical Study [Volume 36, Issue 6, 2023, Pages 1136-1142]
-
Xing, Y.
Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
-
Xu, D.
A Dynamic Model for Laminated Piezoelectric Microbeam [Volume 36, Issue 6, 2023, Pages 1143-1149]
-
Xu, H.
Rolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm [Volume 32, Issue 1, 2019, Pages 121-126]
-
Xu, Jie
Robot path optimization and Application in BS storage system considering Image processing Technology [(Articles in Press)]
-
Xu, Ke
Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
-
Xu, R.
Potential of High-Carbon Domanik (Upper Devonian) Shale Deposits: Timan-Pechora Oil and Gas Province Assessment [Volume 37, Issue 8, 2024, Pages 1639-1657]
-
Xu, Y. Q.
Numerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection [Volume 33, Issue 7, 2020, Pages 1403-1412]
-
Xu, Yuqiang
Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
-
XU, Zhen
An Analysis Method on Post-earthquake Traversability of Road Network Considering Building Collapse [Volume 32, Issue 11, 2019, Pages 1584-1590]
-
Xudong, W.
Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
-
Xuezhen, S.
Design and Experimental Study of a Combined Pneumatic Plot Seed-metering Device for Cotton [Volume 33, Issue 8, 2020, Pages 1652-1661]
Y
-
Yaakob, Omar
Computer Simulation Studies on the Effect Overlap Ratio for Savonius Type Vertical Axis Marine Current Turbine [Volume 23, Issue 1, 2010, Pages 79-88]
-
Yaakob, Omar
Experimental Studies on Savonius-type Vertical Axis Turbine for Low Marine Current Velocity [Volume 26, Issue 1, 2013, Pages 91-98]
-
Yadav, A.
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Yadav, A.
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Yadav, K.
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Yadav, N.
Performance and Economic Analysis of the Utilization of Construction and Demolition Waste as Recycled Concrete Aggregates [Volume 37, Issue 3, 2024, Pages 460-467]
-
Yadegari, M
Closed-loop Supply Chain Inventory-location Problem with Spare Parts in a Multi-Modal Repair Condition [Volume 31, Issue 2, 2018, Pages 346-356]
-
Yadegari, M.
Exploring Factors Influencing Cryptocurrency Adoption: A Comprehensive Modeling Based on Fuzzy Cognitive Maps Approach [Volume 36, Issue 11, 2023, Pages 2073-2086]
-
Yadollahzadeh Tabari, M.
Fuzzy Centralized Coordinate Learning and Hybrid Loss for Human Activity Recognition [Volume 35, Issue 1, 2022, Pages 130-141]
-
Yadollahzadeh Tabari, M.
Fall Detection using Deep Learning Algorithms and Analysis of Wearable Sensor Data by Presenting a New Sampling Method [Volume 35, Issue 10, 2022, Pages 1941-1958]
-
Yadollahzadeh Tabari, Meisam
Estimating Reliability in Mobile ad-hoc Networks Based on Monte Carlo Simulation (TECHNICAL NOTE) [Volume 27, Issue 5, 2014, Pages 739-746]
-
YadollahzadehTabari, M.
Modeling and Performance Evaluation of Energy Consumption in S-MAC Protocol Using Generalized Stochastic Petri Nets [Volume 33, Issue 6, 2020, Pages 1114-1121]
-
Yaghin, Mohammad Ali
Experimental and Numerical Study of Energy Absorption Capacity of Glass Reinforced SCC Beams [Volume 32, Issue 12, 2019, Pages 1733-1744]
-
Yaghmae, M.H.
A Fuzzy Based Three Color Meter/Marker for Diffserv Networks (RESEARCH NOTE) [Volume 17, Issue 3, 2004, Pages 243-250]
-
Yaghmaee, F
Improved Content Aware Image Retargeting Using Strip Partitioning [Volume 31, Issue 5, 2018, Pages 684-692]
-
Yaghmaee, F.
Improving Image Inpainting based on Structure and Texture Information Using Quadtree [Volume 33, Issue 5, 2020, Pages 940-948]
-
Yaghmaee, Farzin
Robust Fuzzy Content Based Regularization Technique in Super Resolution Imaging [Volume 29, Issue 6, 2016, Pages 769-777]
-
Yaghmaee, Maziar
Synthesis of TiC-Al2O3 Nanocomposite from Impure TiO2 by Mechanical Activated Sintering [Volume 21, Issue 3, 2008, Pages 275-280]
-
Yaghmaei, S.
Some Investigation on Bioremediation of PahsContaminated Soil in Iran Tar Refinery [Volume 15, Issue 1, 2002, Pages 1-10]
-
Yaghmaei, S.
Mathematical Modeling of Natural in Situ Bioremediation to Estimate Initial Contaminant Concentration Effect [Volume 15, Issue 2, 2002, Pages 105-114]
-
Yaghmaei, S.
Treatment of Wastewater Containing Carbohydrates using Pichia Saitoi Culture [Volume 17, Issue 3, 2004, Pages 209-218]
-
Yaghmaei, S.
Solid State Fermentation for Production of Chitosan by Aspergillus Niger [Volume 22, Issue 1, 2009, Pages 1-6]
-
Yaghmaei, S.
Production of Extracellular Protease and Determination of Optimal Condition by Bacillus Licheniformis BBRC 100053 (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 221-228]
-
Yaghmaei, S.
Effect of Polyethylene Glycol and Triton X-100 on the Enzymatic Treatment of Bisphenol A [Volume 31, Issue 11, 2018, Pages 1816-1823]
-
Yaghmaei, S.
Biodegradation of Polychlorinated Biphenyls by and Isolated from Contaminated Soil [Volume 32, Issue 5, 2019, Pages 628-633]
-
Yaghmaei, S.
Immobilization of Laccase from Trametes hirsuta onto CMC Coated Magnetic Nanoparticles [Volume 33, Issue 4, 2020, Pages 513-519]
-
Yaghmaei-Sabegh, Saman
Stochastic Finite Fault Modeling for the 16 September 1978 Tabas, Iran, Earthquake [Volume 24, Issue 1, 2011, Pages 15-24]
-
Yaghmaei-Sabegh, Saman
A WAVELET-BASED PROCEDURE FOR MINING OF PULSE-LIKE GROUND MOTIONS FEATURES ON RESPONSE SPECTRA [Volume 25, Issue 1, 2012, Pages 39-50]
-
Yaghmaei-Sabegh, Saman
Improvement of Iranian Seismic Design Code Considering the Near-Fault Effects [Volume 25, Issue 2, 2012, Pages 147-158]
-
Yaghmaei-Sabegh, Saman
Wavelet-based Analysis for Pulse Period of Earthquake Ground-motions [Volume 26, Issue 10, 2013, Pages 1135-1144]
-
Yaghobi, H.
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Yaghobi, H.
Irradiation and Temperature Estimation with a New Extended Kalman Particle Filter for Maximum Power Point Tracking in Photovoltaic Systems [Volume 36, Issue 6, 2023, Pages 1099-1113]
-
Yaghobi, H.
Using Reluctance Torque Theory in Spoke Type Permanent Magnet Vernier Motors to Increase Average Torque [Volume 37, Issue 6, 2024, Pages 1183-1193]
-
Yaghobi, H.
Synchronous Generator Dual Estimation Using Sigma Points Kalman Filter [Volume 37, Issue 7, 2024, Pages 1239-1251]
-
Yaghobi, Hamid
A Protection for Loss of Excitation in Synchronous Generator in the presence of series compensation capacitor [(Articles in Press)]
-
Yaghoibi, M.
Cycle Time Reduction and Runtime Rebalancing by Reallocating Dependent Tasks [Volume 30, Issue 12, 2017, Pages 1831-1839]
-
Yaghoobi, N. S.
Factors Affecting the Cathode Edge Nodulation in Copper Electrorefining Process [Volume 35, Issue 12, 2022, Pages 2370-2376]
-
Yaghoubi, A.
A New Method for Computation the Success Probability of Coverage for Switch Unit in the Switching Systems [Volume 33, Issue 12, 2020, Pages 2509-2513]
-
Yaghoubi, Javad
Radio Frequency-micro Electromechanical System Switch with High Speed and Low Actuated Voltage [Volume 29, Issue 10, 2016, Pages 1380-1383]
-
Yaghoubi, M.
A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources [Volume 4, Issue 3, 1991, Pages 115-126]
-
Yagoob, J. A.
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Yahia, H
Emulation, Model Identification and New-approach Characterization of a PV Panel (TECHNICAL NOTE) [Volume 31, Issue 8, 2018, Pages 1222-1227]
-
Yahia Cherif, S.
Wheel Load Torque Emulation for Electric Propulsion Structure using Dual Induction Motors [Volume 35, Issue 6, 2022, Pages 1202-1208]
-
Yahia Mehrjerdi, Yahia
A Novel Continuous KNN Prediction Algorithm to Improve Manufacturing Policies in a VMI Supply Chain [Volume 27, Issue 11, 2014, Pages 1681-1690]
-
Yahia Mehrjerdi, Yahia
A Hybrid Dynamic Programming for Inventory Routing Problem in Collaborative Reverse Supply Chains [Volume 29, Issue 10, 2016, Pages 1412-1420]
-
Yahiou, A.
Inrush Current Reduction by a Point-on-wave Energization Strategy and Sequential Phase Shifting in Three-Phase Transformer [Volume 35, Issue 12, 2022, Pages 2321-2328]
-
Yahya, A.
Effect of Underwater Ambient Noise on Quadraphase Phase-shift Keying Acoustic Sensor Network Links in Extremely Low Frequency Band [Volume 30, Issue 7, 2017, Pages 981-987]
-
Yahya, N. Y
Synthesis and Characterization of CaO-TiO2 for Transesterification of Vegetable Palm Oil [Volume 31, Issue 8, 2018, Pages 1326-1333]
-
Yahyaei, M.
Inelastic Continuum Modeling of Carbon Nanotube,s Behavior Using Finite Element Method [Volume 20, Issue 2, 2007, Pages 129-135]
-
Yahyaei, Mohsen
Multi-criteria Logistic Hub Location by Network Segmentation under Criteria Weights Uncertainty (RESEARCH NOTE) [Volume 27, Issue 8, 2014, Pages 1205-1214]
-
Yahyaeii, M.
Stress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE) [Volume 21, Issue 3, 2008, Pages 227-234]
-
Yahyaoui, K.
Smart City Surveillance: Edge Technology Face Recognition Robot Deep Learning Based [Volume 37, Issue 1, 2024, Pages 25-36]
-
Yahyazadeh, M.
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Yahyazadeh, Meisam
Perfect Tracking of Supercavitating Non-minimum Phase Vehicles Using a New Robust and Adaptive Parameter-optimal Iterative Learning Control [Volume 27, Issue 7, 2014, Pages 1071-1080]
-
Yakhchalian, Mansoor
SEISMIC BEHAVIOR OF SILOS WITH DIFFERENT HEIGHT TO DIAMETER RATIOS CONSIDERING GRANULAR MATERIAL-STRUCTURE INTERACTION [Volume 25, Issue 1, 2012, Pages 27-38]
-
Yakkeshi, Amin
Optimizing Energy Recovery from Marine Diesel Engines: A Thermodynamic Investigation of Supercritical Carbon Dioxide Cycles [(Articles in Press)]
-
Yalei, L.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Yan, B.
Simulation and Experimental Study of Vibration and Noise of Pure Electric Bus Transmission based on Finite Element and Boundary Element Methods [Volume 32, Issue 7, 2019, Pages 1023-1030]
-
Yan, G.
Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
-
Yandulov, Pavel
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Yang, Binxing
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE) [Volume 26, Issue 9, 2013, Pages 975-984]
-
Yang, H.
Comprehensive Review of Demulsifiers based on Magnetic Nanoparticles for Oil-water and Water-oil Separation [Volume 37, Issue 5, 2024, Pages 904-919]
-
Yang, Hongyin
Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]
-
Yang, J.
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Yang, K.
Vibration and Noise Reduction Optimization Design of Mine Chute with Foam Aluminum Laminated Structure [Volume 33, Issue 8, 2020, Pages 1668-1676]
-
Yang, K.
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Yang, Kai
EFFECT OF LOCATION OF EXPLANATORY VARIABLE ON MONITORING POLYNOMIAL QUALITY PROFILES [Volume 25, Issue 2, 2012, Pages 131-140]
-
Yang, X.
Framework of Electric Vehicle Fault Diagnosis System Based on Diagnostic Communication [Volume 37, Issue 6, 2024, Pages 1194-1207]
-
Yang, XJ
Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
-
Yang, Y.
Rolling Bearing Fault Analysis by Interpolating Windowed DFT Algorithm [Volume 32, Issue 1, 2019, Pages 121-126]
-
YanJun, Wang
Research on Properties of Fluid Pressure Drop for Electric Vehicle IGBT Pin Fin Heat Sink [Volume 28, Issue 4, 2015, Pages 627-633]
-
Yanqoritha, N.
Variations of Organic Loading Rate on Tofu Wastewater Degradation using Upflow Anaerobic Sludge Blanket Reactor by Modified Stover-Kincannon Model [Volume 36, Issue 3, 2023, Pages 490-496]
-
Yao, Z.
Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
-
Yapang Gharavi, Sakhi
Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 293-306]
-
Yarmohammadi, H.
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Yarramsetty, S.
Enhancing Comfort in Tropical Institutional Buildings: Integrating Thermal, Acoustic and Visual Performance with a Unified Index [Volume 36, Issue 12, 2023, Pages 2253-2263]
-
Yaseen, L. A.
Discrimination between Inrush and Internal Fault Currents in Power Transformers Using Hyperbolic S-Transform [Volume 36, Issue 12, 2023, Pages 2184-2189]
-
Yashmolkin, Arslan
Analysis of oil and gas controlling factors of Lower Silurian and Upper Ordovician sediments of the Wufeng-Longmaxi Formation in the Sichuan basin. [(Articles in Press)]
-
Yashtulov, N. A.
Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media [Volume 32, Issue 5, 2019, Pages 641-646]
-
Yashwanth, M. K.
Machine Learning Models for Mechanical and Micro Structural Properties of Recycled Fine Aggregate Concrete Using Different Mixing Approaches [Volume 37, Issue 5, 2024, Pages 997-1011]
-
Yasin Mousavi, S.
Performance of High-strength Concrete Made with Recycled Ceramic Aggregates (Research Note) [Volume 33, Issue 6, 2020, Pages 1085-1093]
-
Yat Huang, Yau
Energy Conservation Potential of the Heat Pipe Heat Exchangers: Experimental Study and Predictions [Volume 25, Issue 3, 2012, Pages 193-200]
-
Yat Huang, Yau
Fully Fresh Air Air-conditioning System Equipped with Double Heat Pipe Based Heat Recovery Technology [Volume 26, Issue 1, 2013, Pages 51-58]
-
Yavari, A.
Election Prediction Based on Sentiment Analysis using Twitter Data [Volume 35, Issue 2, 2022, Pages 372-379]
-
Yavari, A.
Election Prediction Based on Messages Feature Analysis in Twitter Social Network [Volume 36, Issue 6, 2023, Pages 1179-1184]
-
Yavari, Mahdieh
An Investigation on Stability, Electrical and Thermal Characteristics of Transformer Insulting Oil Nanofluids [Volume 29, Issue 10, 2016, Pages 1332-1340]
-
Yavari, Maryam
Adsorption of Methylene Blue from Aqueous Solutions by Silk Cocoon [Volume 29, Issue 9, 2016, Pages 1191-1197]
-
Yazdani, A.
The Use of Monte-Carlo Simulations in Seismic Hazard Analysis in Tehran and Surrounding Areas [Volume 25, Issue 2, 2012, Pages 159-166]
-
Yazdani, Azad -
Computation of Earthquake Response via Fourier Amplitude Spectra [Volume 22, Issue 2, 2009, Pages 147-152]
-
Yazdani, Azad -
STATISTICAL PREDICTION OF THE SEQUENCE OF LARGE EARTHQUAKES IN IRAN [Volume 24, Issue 4, 2011, Pages 325-336]
-
Yazdani, Azad -
Approximate Incremental Dynamic Analysis Using Reduction of Ground Motion Records [Volume 28, Issue 2, 2015, Pages 190-197]
-
Yazdani, B.
Hydrothermal Synthesis of Aligned Hydroxyapatite Nanorods with Ultra-High Crystallinity [Volume 21, Issue 2, 2008, Pages 109-116]
-
Yazdani, B.
Synthesise of CoFe2O4-Polyaniline Nanocomposite and Evaluation of its Magnetic Properties [Volume 22, Issue 4, 2009, Pages 381-386]
-
Yazdani, M.
Comprehensive Framework of Influential Factors on Innovation Ecosystem Resilience: Using Meta-Synthesis and Structural Equation Modelling [Volume 37, Issue 2, 2024, Pages 323-340]
-
Yazdani, R.
Structural Evolution of Al-20% (wt) Al2O3 System during Ball Milling Stages [Volume 22, Issue 2, 2009, Pages 169-178]
-
Yazdani, S.
A Novel Ensemble Deep Learning Model for Building Energy Consumption Forecast [Volume 37, Issue 6, 2024, Pages 1067-1075]
-
Yazdani Rad, Rahim
Effect of Chromium Content on Formation of (Mo1-x-Crx) Si2 Nanocomposite Powders via Mechanical Alloying [Volume 25, Issue 2, 2012, Pages 99-104]
-
Yazdani Rad, Rahim
Effect of Formation of Ag2Ti4O9 Phase on Photocatalytic Activity of Ag-TiO2 Nanocomposite [Volume 29, Issue 5, 2016, Pages 663-668]
-
Yazdani-Rad, Rahim
Synthesis and Characterization of Nanocrystalline Ni3Al Intermetallic during Mechanical Alloying Process [Volume 25, Issue 2, 2012, Pages 89-98]
-
YazdaniRad, Rahim
Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding [Volume 28, Issue 10, 2015, Pages 1493-1499]
-
Yazdanpanah, M. J.
An Unsupervised Learning Method for an Attacker Agent in Robot Soccer Competitions Based on the Kohonen Neural Network [Volume 21, Issue 3, 2008, Pages 255-268]
-
Yazdanpanah, Reza
Robust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks and Sliding Mode Flux Observers [Volume 20, Issue 3, 2007, Pages 221-232]
-
Yazdanparast, S.
Modelling and Decision-making on Deteriorating Production Systems using Stochastic Dynamic Programming Approach [Volume 31, Issue 12, 2018, Pages 2052-2058]
-
Yazdekhasti, a
The Integrated Supply Chain of After-sales Services Model: A Multi-objective Scatter Search Optimization Approach [Volume 31, Issue 3, 2018, Pages 422-431]
-
Yazdi, H.
Experimental Assessment of a Fixed On-Shore Oscillating Water Column Device: Case Study on Oman Sea [Volume 33, Issue 3, 2020, Pages 494-504]
-
Yazdi, M.
A Mathematical Model for Scheduling Elective Surgeries for Minimizing the Waiting Times in Emergency Surgeries [Volume 33, Issue 3, 2020, Pages 448-458]
-
Yazdi, Mehran
Micro Particles Transport and Deposition in Realistic Geometry of Human Upper Airways [Volume 25, Issue 4, 2012, Pages 315-322]
-
Yazdizadeh, A.
Identification of Wind Turbine using Fractional Order Dynamic Neural Network and Optimization Algorithm [Volume 33, Issue 2, 2020, Pages 277-284]
-
Yazdizadeh, A.
A New Uniformly Ultimate Boundedness Criterion for Temperature Dependent Average Bristle Deflections [Volume 33, Issue 6, 2020, Pages 1128-1133]
-
Yeat, W.F
Numerical Modeling of Railway Track Supporting System using Finite-Infinite and Thin Layer Elements [Volume 22, Issue 2, 2009, Pages 131-144]
-
Yegane, B. Y.
An Integrated Production-distribution Problem of Perishable Items with Dynamic Pricing Consideration in a Three-echelon Supply Chain [Volume 36, Issue 11, 2023, Pages 2038-2051]
-
Yektaniroumand, T.
Optimal Rotor Fault Detection in Induction Motor Using Particle-Swarm Optimization Optimized Neural Network [Volume 31, Issue 11, 2018, Pages 1876-1882]
-
Yener, Ş. Ç.
Demonstration of Synaptic Connections with Unipolar Junction Transistor based Neuron Emulators [Volume 33, Issue 11, 2020, Pages 2195-2200]
-
Yeop Majlis, Buranuddin
Fabrication and Characterization of a New MEMS Capacitive Microphone using Perforated Diaphragm [Volume 22, Issue 2, 2009, Pages 153-160]
-
Yifan, T.
Predicting Service Life of Polyethylene Pipes under Crack Expansion using "Random Forest" Method [Volume 36, Issue 12, 2023, Pages 2243-2252]
-
Yifan, T.
Method for Assessing Damage to Gas Distribution Network Pipelines based on Nonlinear Guided Wave [Volume 37, Issue 5, 2024, Pages 852-859]
-
Yiling, Liu
The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
-
Ying, Feng
A Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets [Volume 29, Issue 8, 2016, Pages 1087-1093]
-
Yixin, L.
Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
-
Y. Ma, W.
EXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 73-80]
-
Yogafanny, E.
Leaching Potential and Effectiveness of Pervious Mortar Filters in Bacteria and Turbidity Removal from Surface Water [Volume 37, Issue 7, 2024, Pages 1252-1262]
-
Yolmeh, Abdolmajid
GENETIC AND TABU SEARCH ALGORITHMS FOR THE SINGLE MACHINE SCHEDULING PROBLEM WITH SEQUENCE-DEPENDENT SET-UP TIMES AND DETERIORATING JOBS [Volume 23, Issue 3, 2010, Pages 227-234]
-
Yongping, L.
Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 4, 2020, Pages 676-685]
-
Yongping, L.
Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 7, 2020, Pages 1364-1374]
-
Yongqiao, W.
Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 4, 2020, Pages 676-685]
-
Yongqiao, W.
Meshing Error of Elliptic Cylinder Gear Based on Tooth Contact Analysis [Volume 33, Issue 7, 2020, Pages 1364-1374]
-
Yongyong, Z.
Modal Optimization Design of Supporting Structure Based on the Improved Particle Swarm Algorithm [Volume 35, Issue 4, 2022, Pages 740-749]
-
Yoosef-Zadeh, D.
Residual Stresses Measurement in Hollow Samples Using Contour Method [Volume 33, Issue 5, 2020, Pages 885-893]
-
Yoshida, K.
Influence of an Inclusion on Multi-Pass Copper Shaped-Wire Drawing by 2D Finite Element Analysis [Volume 16, Issue 3, 2003, Pages 279-292]
-
Yosofi, Yonus
Decolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE) [Volume 29, Issue 11, 2016, Pages 1582-1586]
-
Younesi, H.
Performance of Biological hydrogen Production Process from Synthesis Gas, Mass Transfer in Batch and Continuous Bioreactors [Volume 17, Issue 2, 2004, Pages 105-120]
-
Younesi, H.
Dynamic Model For Production of Biohydrogen Via Water- Gas Shift Reaction (RESEARCH NOTE) [Volume 18, Issue 2, 2005, Pages 145-152]
-
Younesi, H.
Controllable Synthesis of Flower-Like ZnO Nanostructure with Hydrothermal Method (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 283-290]
-
Younesi, H.
Lipase Production in Solid State Fermentation Using Aspergillus niger: Response Surface Methodology [Volume 25, Issue 3, 2012, Pages 151-160]
-
Younesi, H.
The Potential of Date-palm Leaf Ash as Low-cost Adsorbent for the Removal of Pb(II) Ion from Aqueous Solution [Volume 25, Issue 4, 2012, Pages 269-278]
-
Younesi, H.
Aqueous Cadmium Ions Removal by Adsorption on APTMS Grafted Mesoporous Silica MCM-41 in Batch and Fixed Bed Column Processes [Volume 26, Issue 5, 2013, Pages 473-488]
-
Younesi, H.
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment [Volume 32, Issue 2, 2019, Pages 184-192]
-
Younessi, R.
Prediction of Sulfate Scale Depositions in Oilfield Operations Using Arithmetic of LR Fuzzy Numbers [Volume 19, Issue 1, 2006, Pages 99-106]
-
Younsi, M.
Influence of Multiple Repairs on the Quality of Duplex Welded Joints [Volume 35, Issue 4, 2022, Pages 675-684]
-
Yousefi, Borzou
Hierarchical Control Strategy of CPL-based DC MGs using a New DAPI Secondary Controller [(Articles in Press)]
-
Yousefi, Borzou
A DFT Based Secondary Average Controller for Voltage/Frequency Regulation and Active/Reactive Power Sharing of AC Microgrids [(Articles in Press)]
-
Yousefi, E.
Transient Natural Convection Flow on an Isothermal Vertical Wall at High Prandtl Numbers: Second-Order Approximation [Volume 14, Issue 4, 2001, Pages 367-376]
-
Yousefi, Ehsan
Removal of Dimethyl Phthalate from Aqueous Solution by Synthetic Modified Nano Zeolite Using Cu2O Nanoparticles [Volume 29, Issue 9, 2016, Pages 1198-1207]
-
Yousefi, G.
Hopper Wall Simulation in ANSYS to Determine Displacement Due to Single Ball Impact [Volume 32, Issue 1, 2019, Pages 171-176]
-
Yousefi, M.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Yousefi, M.
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Yousefi, M.
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Yousefi, Mohammad Reza
Material Flow in Rotary Drums [Volume 27, Issue 6, 2014, Pages 829-838]
-
Yousefi, M.R.
Sealing of Rotary Drums for Operation Under Pressurized Conditions [Volume 19, Issue 1, 2006, Pages 1-12]
-
Yousefi, Sohrabali
Numerical Solution of Optimal Control of Time-varying Singular Systems via Operational Matrices [Volume 27, Issue 4, 2014, Pages 523-532]
-
Yousefian, Hadi
An Improved Pixon-Based Approach for Image Segmentation [Volume 24, Issue 1, 2011, Pages 25-35]
-
Yousefi Azad, S.
A Novel Disc-Type Reluctance Motor [Volume 10, Issue 1, 1997, Pages 11-18]
-
Yousefi Kebria, D.
Electrokinetic and Sediment Remediation in Microbial Fuel Cell (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 489-494]
-
Yousefipour, A.
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Yousefi Yegane, B
Simultaneous Pricing, Routing, and Inventory Control for Perishable Goods in a Two-echelon Supply Chain [Volume 31, Issue 7, 2018, Pages 1074-1081]
-
Yousefi Yegane, Babak
A Non-linear Integer Bi-level Programming Model for Competitive Facility Location of Distribution Centers [Volume 29, Issue 8, 2016, Pages 1131-1140]
-
Yousefi Yegane, Babak
Critical Path Method for Flexible Job Shop Scheduling Problem with Preemption [Volume 30, Issue 2, 2017, Pages 261-269]
-
Yousefpour, M.
Effect of Deformation-Induced Defects on the Microstructure and Pitting Corrosion Behavior of Al-Ag Alloy [Volume 31, Issue 12, 2018, Pages 2092-2101]
-
Yousefsani, Seyed Abdolmajid
Effect of Corner Bluntness on Energy Absorbing Capability of Non-circular Metallic Tubes Subjected to Axial Impact [Volume 26, Issue 8, 2013, Pages 875-884]
-
Yousefsani, Seyed Abdolmajid
Analytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings [Volume 27, Issue 3, 2014, Pages 475-486]
-
Yousefzadi Nobakht, Ali
Optimization of GRI-mech 3.0 Mechanism using HCCI Combustion Models and Genetic Algorithm [Volume 24, Issue 2, 2011, Pages 155-168]
-
Yousfi, A
The Effect of the Variation of Volume Flow Rate on the Thermal Parameters of a Solar Air Collector with a Single Pass of Air: Case Study for Laghouat, Algeria [Volume 31, Issue 1, 2018, Pages 71-78]
-
Yousuf Ali, M.
Performance and Emission Characteristics of a Diesel Engine with Cottonseed Oil Plus Diesel Oil Blends [Volume 18, Issue 1, 2005, Pages 1-7]
-
Yousufuddin, Syed
Effect of Ignition Timing, Equivalence Ratio, and Compression Ratio on the Performance and Emission Characteristics of a Variable Compression Ratio Si Engine using Ethanol-Unleaded Gasoline Blends [Volume 21, Issue 1, 2008, Pages 97-106]
-
Yousufuddin, Syed
Exhaust Emission Analysis of an Internal Combustion Engine Fuelled with Hydrogen-Ethanol Dual Fuel [Volume 21, Issue 2, 2008, Pages 203-210]
-
Youzbashi, Amir Ali
Role of Calcium Content in Dissolution Kinetics of Iranian Borate Minerals in Sulfuric Acid [Volume 16, Issue 3, 2003, Pages 293-300]
-
Youzbashi, Amir Ali
Investigation of Phase Evolution of TiC-TiB2 Nanostructure Fabricated by MASHS (RESEARCH NOTE) [Volume 26, Issue 1, 2013, Pages 33-38]
-
Yu, C.
Bionic Perception Method of Navel Orange Plucking Position Based on Fmincon and PD Angle Control [Volume 35, Issue 11, 2022, Pages 2265-2274]
-
Yu, D.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Yu, G.
An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
-
Yu, K.
An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
-
Yu, T.
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Yu, Tianlai
Empirical Seismic Vulnerability and Damage of Bottom Frame Seismic Wall Masonry Structure: A Case Study in Dujiangyan (China) Region [Volume 32, Issue 9, 2019, Pages 1260-1268]
-
Yu, Xiaomo
Simulation and Experiment on Conveying Device of Cutting System of Small Sugarcane Harvester (RESEARCH NOTE) [Volume 26, Issue 9, 2013, Pages 975-984]
-
Yu, Y
Comparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck [Volume 31, Issue 2, 2018, Pages 204-211]
-
Yu, Y.
Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
-
Yu, Y.
Analytical Investigation of Tire-Road Contact Characteristics for Wheelchair Robots Safely Running [Volume 31, Issue 10, 2018, Pages 1767-1772]
-
Yu, Y.
Analytical Matching of Optimal Damping Characteristics Curve for Vehicle Passive Suspensions [Volume 31, Issue 12, 2018, Pages 2109-2114]
-
Yu, Y.
Design and Parameters Optimization of Pteris vittata Automatic Sowing Machine for Phytoremediation [Volume 33, Issue 4, 2020, Pages 694-701]
-
Yuan, Huimin
The Research on the Biggest Borehole Curvature that Allowed through for the Rotating Casing (RESEARCH NOTE) [Volume 28, Issue 3, 2015, Pages 483-489]
-
Yuan, Jianyi
Physical Model Test and Numerical Simulation Study of Deformation Mechanism of Wall Rock on Open Pit to Underground Mining (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1795-1802]
-
Yuan, J. Y.
Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
-
Yuan, Ming
Field Programmable Gate Array Implementation of Active Control Laws for Multi-mode Vibration Damping [Volume 29, Issue 2, 2016, Pages 229-235]
-
Yuan, Ming
Compact and Efficient Active Vibro-acoustic Control of a Smart Plate Structure [Volume 29, Issue 8, 2016, Pages 1068-1074]
-
Yuan, RB
Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane (TECHNICAL NOTE) [Volume 30, Issue 8, 2017, Pages 1246-1252]
-
Yudanto, S. D.
Synthesis of Hard Layer by Titanium Addition During Welding Process and Quenched Directly [Volume 36, Issue 3, 2023, Pages 532-539]
-
Yudanto, S. D.
Electrolyte Temperature Dependency of Electrodeposited Nickel in Sulfate Solution on the Hardness and Corrosion Behaviors [Volume 36, Issue 6, 2023, Pages 1193-1200]
-
Yudanto, S. D.
Synthesis of Polyvinyl Alcohol-Chitosan Composite Film using Nanocellulose from Coconut Fibers (Cocos nucifera) [Volume 36, Issue 11, 2023, Pages 1993-2003]
-
Yudanto, Sigit Dwi
Barrel-Spinning-Assisted Nickel Plating onto Copper in Sulphate Solution to Enhance Corrosion Resistance [(Articles in Press)]
-
Yudao, L.
Design and Experimental Study of a Combined Pneumatic Plot Seed-metering Device for Cotton [Volume 33, Issue 8, 2020, Pages 1652-1661]
-
Yudha, V.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Yudhana, A.
Energy Efficiency with Internet of Things Based Fuzzy Inference System for Room Temperature and Humidity Regulation [Volume 37, Issue 1, 2024, Pages 187-200]
-
Yudhana, A.
CNN-based Approach for Enhancing Brain Tumor Image Classification Accuracy [Volume 37, Issue 5, 2024, Pages 984-996]
-
Yudhanto, F.
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Yudhanto, F.
Physical, Mechanical, and Thermal Properties of Polyvinyl Alcohol/Nanocrystalline Cellulose Bioplastic Film [Volume 37, Issue 1, 2024, Pages 94-103]
-
Yue, Xuezhi
Elite Opposition-based Artificial Bee Colony Algorithm for Global Optimization [Volume 28, Issue 9, 2015, Pages 1268-1275]
-
Yulianti, S.
Stern Flap Application on Planing Hulls to Improve Resistance [Volume 35, Issue 12, 2022, Pages 2313-2320]
-
Yulianti, S.
Numerical Investigation of Interceptor Bulb to Improve Trim Control [Volume 37, Issue 8, 2024, Pages 1475-1485]
-
Yuliasih, I.
Blockchain-based Traceability System for Indonesian Coffee Digital Business Ecosystem [Volume 36, Issue 5, 2023, Pages 879-893]
-
Yunos, M. Z
The Coating Effect of PANI/Silver on Performance of Polysulfone Membrane Toward Protein Separation [Volume 31, Issue 8, 2018, Pages 1406-1412]
-
Yusefi, A.
Effect of Sintering Conditions on Microstructure and the Superconducting Properties of YBa2Cu3O7 x [Volume 16, Issue 4, 2003, Pages 355-360]
-
Yusmaniar, Y.
Synthesis of Polyvinyl Alcohol-Chitosan Composite Film using Nanocellulose from Coconut Fibers (Cocos nucifera) [Volume 36, Issue 11, 2023, Pages 1993-2003]
-
Yusof, K. N
Preliminary Characterization of Corn Cob Ash as an Alternative Material for Ceramic Hollow Fiber Membrane (CHFM/CCA) [Volume 31, Issue 8, 2018, Pages 1389-1397]
-
Yusof, N
Inhibitory Effects of Swietenia Mahagoni Seeds Extract on Α-Glucosidase and Α-amylase [Volume 31, Issue 8, 2018, Pages 1308-1317]
-
Yusup, S.
Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil [Volume 32, Issue 1, 2019, Pages 18-27]
-
Yusup, Y
Proposed Procedure for Estimating the Coefficient of Three-factor Interaction for 2^p 3^m 4^q Factorial Experiments (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 12-18]
-
Yuwono, A. H.
Characteristics of PANi/rGO Nanocomposite as Protective Coating and Catalyst in Dye-sensitized Solar Cell Counter Electrode Deposited on AISI 1086 Steel Substrate [Volume 31, Issue 10, 2018, Pages 1741-1748]
Z
-
Zabihi, Fahimeh
Trucks Scheduling in a Multi-product Cross Docking System with Multiple Temporary Storages and Multiple Dock Doors [Volume 29, Issue 11, 2016, Pages 1595-1603]
-
Zadehbagheri, M
A Novel Method for Modeling and Simulation of Asymmetrical Impedance-source Converters [Volume 31, Issue 5, 2018, Pages 741-751]
-
Zafar, Fareeha
Analysis of Packet Loss and Latency Control for Robust IPTV over Mobile WiMAX and LTE Assessment (RESEARCH NOTE) [Volume 26, Issue 3, 2013, Pages 229-240]
-
Zafardoagoo, M.
NiO-Ni-Al2O3(γ) Nanocatalyst by Pulse Electrocodeposition Over Ni Open-cell Foam for Methane Reforming [Volume 36, Issue 10, 2023, Pages 1908-1918]
-
Zafarmand, B
Random Vortex Method for Geometries with Unsolvable Schwarz-Christoffel Formula [Volume 31, Issue 1, 2018, Pages 38-44]
-
Zafarmand, B.
High Reynolds Viscous Flow Simulation Past the Elliptical Airfoil by Random Vortex Blob [Volume 30, Issue 12, 2017, Pages 1903-1910]
-
Zafarmand, B.
Use of Random Vortex Method in Simulating Non-Newtonian Fluid Flow in a T-junction for Various Reynolds Numbers and Power-law Indexes [Volume 35, Issue 5, 2022, Pages 954-966]
-
Zafarmand, Behrooz
A Novel Similarity Solution of Turbulent Boundary Layer Flow over a Flat Plate [Volume 28, Issue 11, 2015, Pages 1680-1686]
-
Zafarmand, Behrooz
Analysis of the Characteristics, Physical Concepts and Entropy Generation in a Turbulent Channel Flow Using Vortex Blob Method [Volume 29, Issue 7, 2016, Pages 985-994]
-
Zafisah, N. S
Influence of Particle Size and Pressure Drop in Cake Filtration Process on Removal of Suspended Solids in Anaerobically Digested Palm Oil Mill Effluent [Volume 31, Issue 8, 2018, Pages 1437-1445]
-
Zagloel, T. Y.
Measuring and Benchmarking the Quality Culture Maturity of Construction Companies in Indonesia [Volume 35, Issue 10, 2022, Pages 2027-2039]
-
Zahabi, M
The Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method [Volume 31, Issue 2, 2018, Pages 307-314]
-
Zahabi, M. R.
Optimal Singular Value Decomposition Based Pre-coding for Secret Key Extraction from Correlated Orthogonal Frequency Division Multiplexing Sub-channels [Volume 33, Issue 7, 2020, Pages 1214-1222]
-
Zahabi, M. R.
A Behavioural Model for Accurate Investigation of Noisy Lorenz Chaotic Synchronization Systems [Volume 36, Issue 8, 2023, Pages 1502-1508]
-
Zahedi, M.
Cycle Time Reduction and Runtime Rebalancing by Reallocating Dependent Tasks [Volume 30, Issue 12, 2017, Pages 1831-1839]
-
Zahedi, M. J.
Seismic Yield Displacement Profile in Steel Eccentrically Braced Frames [Volume 32, Issue 9, 2019, Pages 1248-1259]
-
Zahedi, Morteza
Cycle Time Optimization of Processes Using an Entropy-Based Learning for Task Allocation [Volume 32, Issue 8, 2019, Pages 1090-1100]
-
Zahedi-Anaraki, A.
A Modified Benders Decomposition Algorithm for a Last-mile Network with Flexible Delivery Options [Volume 35, Issue 8, 2022, Pages 1547-1557]
-
Zahedi Nejad, A.
Numerical and Experimental Investigations for Design of a High Performance Micro-hydro-kinetic Turbine [Volume 30, Issue 5, 2017, Pages 785-790]
-
Zahraee, Seyed mohammad
Ballistic Performance of Hybrid Armor with Ceramic Inserts and Polymeric Matrix for Different Threat Levels (TECHNICAL NOTE) [Volume 27, Issue 6, 2014, Pages 945-950]
-
Zahrai, S. M.
Predicting Shear Capacity of Panel Zone Using Neural Network and Genetic Algorithm [Volume 33, Issue 8, 2020, Pages 1512-1521]
-
Zahrai, S. M.
Investigating Effect of Friction-yielding Top Plate of Rigid Connections on Seismic Response of Special Moment Frames [Volume 37, Issue 8, 2024, Pages 1580-1591]
-
ZAHRAOUI, Issam
New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1056-1061]
-
Zailani, Z. A.
Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes [Volume 36, Issue 11, 2023, Pages 2004-2014]
-
Zain, M.F.M.
Structural and Functional Analysis of an Industrial, Flexible, and Demountable Wall Panel System (RESEARCH NOTE) [Volume 27, Issue 2, 2014, Pages 247-260]
-
Zain, M. Z. M.
Effect of Inclined Angle in Trimming of Ultra-high Strength Steel Sheets Having Inclined and Curved Shapes [Volume 36, Issue 11, 2023, Pages 2004-2014]
-
Zainal, A.
Supercritical Fluid Extraction of Carotenoid from Microalgae with Projected Thermodynamic Models (RESEARCH NOTE) [Volume 21, Issue 2, 2008, Pages 117-126]
-
Zainal, Z. A.
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Zainuri, M.
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis [Volume 32, Issue 7, 2019, Pages 982-990]
-
Zainuri, M.
Structural, Optical and Defect State Analyses of ZnO Nanoparticle Films [Volume 33, Issue 5, 2020, Pages 852-860]
-
Zaitsev, N. K.
Optical Analyzer for Continuous Monitoring of Dissolved Oxygen in Aviation Fuel and Other Non-aqueous Media [Volume 32, Issue 5, 2019, Pages 641-646]
-
Zaji, Amir Hossein
Impact of the Confluence Angle on Flow Field and Flowmeter Accuracy in Open Channel Junctions [Volume 28, Issue 8, 2015, Pages 1145-1153]
-
Zakaria, Nordin
Hierarchical Deep Learning Model for Tooth Classification in Intra-Oral Dental Photographs [(Articles in Press)]
-
Zakaria, W. A.
Intrusion of Geomesh in Gypseous Soil Under Single Footing [Volume 33, Issue 9, 2020, Pages 1731-1736]
-
Zakaria, Z
Determining of Geotechnical Domain Based on Joint Density and Fault Orientation at Batu Hijau Mine,West Sumbawa-Indonesia (TECHNICAL NOTE) [Volume 31, Issue 4, 2018, Pages 679-683]
-
Zakaria, Z
Seismicity of Batubesi Dam at Sorowako Region Based on Earthquake Data and Microtremor Measurement [Volume 31, Issue 8, 2018, Pages 1180-1186]
-
Zaker, G.R
New Methods for Harmonic Reduction in T. C. R. by Sequence Control of Transformer Taps [Volume 2, Issue 1, 1989, Pages 25-34]
-
Zakeri, Melica
Simulation of Convective Heat Transfer of a Nanofluid in a Circular Cross-section [Volume 26, Issue 6, 2013, Pages 571-576]
-
Zakeri, Mohammad
Effect of Chromium Content on Formation of (Mo1-x-Crx) Si2 Nanocomposite Powders via Mechanical Alloying [Volume 25, Issue 2, 2012, Pages 99-104]
-
Zakerzadeh, Mohammad
Nonlinear Analysis of a Flexible Beam Actuated by a Couple of Active SMA Wire Actuators [Volume 25, Issue 3, 2012, Pages 249-264]
-
Zakhvalinskii, V. S.
Hopping Conductivity in Single Crystals (Cd0.6Zn0.32Mn0.08)3As2 (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1771-1775]
-
Zakiev, I. M.
Analysis of Inner Surface Roughness Parameters of Load-carrying and Support Elements of Mechanical Systems (RESEARCH NOTE) [Volume 30, Issue 8, 2017, Pages 1170-1175]
-
Zakirov, N. N.
Peculiarities of Abrasive Finishing of Surfaces of Parts Made of Aluminium Alloy of АМts Grade in Magnetic Field [Volume 37, Issue 6, 2024, Pages 1098-1105]
-
Zaman, T
Synthesis and Characterization of Porcelain Body Developed from Rice Husk Ash (TECHNICAL NOTE) [Volume 31, Issue 1, 2018, Pages 25-31]
-
Zamani, Cyrus
AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies (RESEARCH NOTE) [Volume 27, Issue 5, 2014, Pages 763-768]
-
Zamani, F.
A Multiple Kernel Learning based Model with Clustered Features for Cancer Stage Detection using Gene Datasets [Volume 36, Issue 11, 2023, Pages 2028-2037]
-
Zamani, Farzane
Development of Clay Foam Ceramic as a Support for Fungi Immobilization to Biodiesel Production (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1691-1696]
-
Zamani, J.
An Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams [Volume 33, Issue 3, 2020, Pages 505-512]
-
Zamani, M.
Experimental Investigation on the Effect of Flow Rate and Load on the Hydrodynamic Behavior and Performance of an Archimedes Screw Turbine [Volume 36, Issue 4, 2023, Pages 733-745]
-
Zamani, Masoud
Batch Kinetics and Modeling of Alkaline Protease Production by Isolated Bacillus sp. (RESEARCH NOTE) [Volume 28, Issue 6, 2015, Pages 841-847]
-
Zamani Ahari, G.
Experimental and Numerical Study on a New Double-walled Tuned Liquid Damper [Volume 35, Issue 1, 2022, Pages 29-44]
-
Zamani Ahari, Gholamreza
Dynamic Analysis of Suspension Footbridges Using an Actual Pedestrian Load Model Compared with EUR23984 EN Requirements [Volume 32, Issue 10, 2019, Pages 1379-1387]
-
Zamanian, A.
Glutaraldehyde: Introducing Optimum Condition for Cross-linking the Chitosan/Gelatin Scaffolds for Bone Tissue Engineering [Volume 35, Issue 10, 2022, Pages 1967-1980]
-
Zamanian, Ali
Effect of Dual Releasing of β-glycerophosphate and Dexamethasone from Ti Nanostructured Surface for Using in Orthopedic Applications [Volume 32, Issue 10, 2019, Pages 1337-1344]
-
Zamanian, M.
Permanent Magnet DC Motor Sliding Mode Control System [Volume 16, Issue 4, 2003, Pages 367-376]
-
Zamanian, M.
Factor Effect Estimation in the Convective Heat Transfer Coefficient Enhancement of Al2O3/EG Nanofluid in a Double-pipe Heat Exchanger [Volume 26, Issue 8, 2013, Pages 837-844]
-
Zamanian, M.
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Zamankhan, Piroz
Two and Three Dimensional Monte Carlo Simulation of Magnetite Nanoparticle Based Ferrofluids [Volume 26, Issue 1, 2013, Pages 99-104]
-
Zamanzadeh, Mohammad-reza
Static Pull-in Analysis of Capacitive FGM Nanocantilevers Subjected to Thermal Moment using Eringen’s Nonlocal Elasticity [Volume 27, Issue 4, 2014, Pages 633-642]
-
Zameni, M.
Synthesis of Zinc Oxide Nanostructured Thin Film by Sol- Gel Method and Evaluation of Gas Sensing Properties [Volume 27, Issue 5, 2014, Pages 757-762]
-
Zandieh, M.
A Mathematical Model for Scheduling Elective Surgeries for Minimizing the Waiting Times in Emergency Surgeries [Volume 33, Issue 3, 2020, Pages 448-458]
-
Zandieh, Mostafa
Simultaneous Multi-Skilled Worker Assignment and Mixed-Model Two-Sided Assembly Line Balancing [Volume 29, Issue 2, 2016, Pages 211-221]
-
Zandrahimi, M
A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings [Volume 31, Issue 5, 2018, Pages 792-798]
-
Zandvakili, A.
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Zandzadeh, M. J.
Space Vector Pulse Width Modulation with Reduced Common Mode Voltage and Current Losses for Six-Phase Induction Motor Drive with Three-Level Inverter [Volume 33, Issue 4, 2020, Pages 586-597]
-
Zanganeh, S.
Formation of Lanthanum Hydroxide Nanostructures: Effect of NaOH and KOH Solvents [Volume 21, Issue 2, 2008, Pages 169-176]
-
Zangene, K.
Ibuprofen Removal from a Pharmaceutical Wastewater using Electro-Fenton Process: An Efficient Technique (RESEARCH NOTE) [Volume 30, Issue 11, 2017, Pages 1639-1646]
-
Zangeneh, Erfan
Reliability Optimization for Complicated Systems with a Choice of Redundancy Strategies (TECHNICAL NOTE) [Volume 28, Issue 10, 2015, Pages 1476-1485]
-
Zangeneh, H.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Zangeneh, H.
Visible Light Activated Fe-N-SiO2/TiO2 Photocatalyst: Providing an Opportunity for Enhanced Photocatalytic Degradation of Antibiotic Oxytetracycline in Aqueous Solution [Volume 36, Issue 4, 2023, Pages 615-629]
-
Zanjirani Farahani, R.
A Branch and Bound Method for Finding Flow Path Designing of Agv Systems (RESEARCH NOTE) [Volume 15, Issue 1, 2002, Pages 81-90]
-
Zarchi, Milad
Mathematical Model and Vibration Analysis of Aircraft with Active Landing Gear System using Linear Quadratic Regulator Technique [Volume 29, Issue 2, 2016, Pages 137-144]
-
Zarchi, Milad
Oscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1167-1174]
-
Zarchi, Milad
Optimized Fuzzy Logic for Nonlinear Vibration Control of Aircraft Semi-active Shock Absorber with Input Constraint (TECHNICAL NOTE) [Volume 29, Issue 9, 2016, Pages 1300-1306]
-
Zarchi, Milad
Numerical Survey of Vibrational Model for Third Aircraft based on HR Suspension System Actuator Using Two Bee Algorithm Objective Functions [Volume 30, Issue 6, 2017, Pages 887-894]
-
Zare, B.
Effects of Xanthan Gum and Lime on Physical Properties and Mechanical Behavior of Organic Soil [Volume 36, Issue 10, 2023, Pages 1758-1772]
-
Zare, F.
Controlling Common-Mode Voltages in Multilevel Inverters [Volume 21, Issue 3, 2008, Pages 243-254]
-
Zare, F.
A New High Frequency Grid Impedance Estimation Technique for the Frequency Range of 2 to150 kHz [Volume 31, Issue 10, 2018, Pages 1666-1674]
-
Zare, F.
Feature Engineering Methods in Intrusion Detection System: A Performance Evaluation [Volume 36, Issue 7, 2023, Pages 1343-1353]
-
Zare, H.
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Zare, H.
Stabilization of Voltage and Current in the Distribution Networks using APF and TSC [Volume 35, Issue 5, 2022, Pages 1064-1073]
-
Zare, H.
A Repetitive Bipolar Pulsed Power Generator Based on Switched-capacitor Concept [Volume 35, Issue 10, 2022, Pages 2056-2064]
-
Zare, H.
Growth Media Optimization for Production of Alkaline Protease from Industrial Wastewater using Bacillus subtilis PTCC 1254 [Volume 36, Issue 3, 2023, Pages 513-522]
-
Zare, M. R.
A Novel Excellence Model of the ICT Industry: Case Study on Telecommunications Backbone Network of Iran [Volume 33, Issue 10, 2020, Pages 2016-2029]
-
Zare, Shahryar
An Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine [Volume 30, Issue 2, 2017, Pages 294-302]
-
Zare, Shahryar
Multi-objective Optimization of Stirling Heat Engine Using Gray Wolf Optimization Algorithm (TECHNICAL NOTE) [Volume 30, Issue 6, 2017, Pages 895-903]
-
Zarean, Maryam
Degradation of Low Concentrations of Formaldehyde in Sono Catalytic Ozonation Advanced Oxidation Processes using Zero-valent Iron [Volume 30, Issue 3, 2017, Pages 366-373]
-
Zareei, A. R.
Elevated Temperature Performance of Concrete Reinforced with Steel, Glass, and Polypropylene Fibers and Fire-proofed with Coating [Volume 35, Issue 5, 2022, Pages 917-930]
-
Zare Ghadi, A
Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron [Volume 31, Issue 8, 2018, Pages 1274-1282]
-
Zareh Bidoki, A. M
Discovering Popular Clicks\' Pattern of Teen Users for Query Recommendation [Volume 31, Issue 8, 2018, Pages 1205-1214]
-
Zarei, M.
Pareto-based Multi-criteria Evolutionary Algorithm for Parallel Machines Scheduling Problem with Sequence-dependent Setup Times [Volume 30, Issue 12, 2017, Pages 1863-1869]
-
Zarei, S.
Testable MUXED-D Scan Cell in Quantum-dot Cellular Technology [Volume 35, Issue 9, 2022, Pages 1728-1734]
-
Zareie, Camellia
Preparation of Nanochitosan as an Effective Sorbent for the Removal of Copper Ions from Aqueous Solutions [Volume 26, Issue 8, 2013, Pages 829-836]
-
Zarei-Ghanavati, M.
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Zaremehrjardi, Y
Application of Multivariate Control Charts for Condition Based Maintenance [Volume 31, Issue 4, 2018, Pages 597-604]
-
Zare Mehrjardi, Yahya
A Nonlinear Autoregressive Model with Exogenous Variables Neural Network for Stock Market Timing: The Candlestick Technical Analysis [Volume 29, Issue 12, 2016, Pages 1717-1725]
-
Zare Mehrjardi, Yahya
Unravelling the Dynamics: Social Media, Absorptive Capacity, and Organizational Performance [(Articles in Press)]
-
Zare Mehrjerdi, Y
The Integrated Supply Chain of After-sales Services Model: A Multi-objective Scatter Search Optimization Approach [Volume 31, Issue 3, 2018, Pages 422-431]
-
Zare Mehrjerdi, Y.
Integrated Order Batching and Distribution Scheduling in a Single-block Order Picking Warehouse Considering S-Shape Routing Policy [Volume 31, Issue 10, 2018, Pages 1723-1733]
-
Zare-Mehrjerdi, Y
Economic-statistical Design of NP Control Chart with Variable Sample Size and Sampling Interval [Volume 31, Issue 4, 2018, Pages 629-639]
-
Zarepor Ashkezari, A.
Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
-
Zarepor Ashkezari, A.
Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
-
Zare Ravandy, M.
A new Online Hall Effect Sensor Fault Detection and Location in Brushless DC Motor Based on Normalized Phases Currents Analysis [Volume 36, Issue 12, 2023, Pages 2145-2152]
-
Zaretalab, Arash
Redundancy Allocation Problem of a System with Three-state Components: A Genetic Algorithm (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1663-1672]
-
Zarezade, S.
A Novel Method for Detecting Targets on Inactive Radars Using an Adaptive Processing on the Ambiguity Function (RESEARCH NOTE) [Volume 31, Issue 6, 2018, Pages 916-920]
-
Zarinfar, M.
Investigating the Effect of Soil Layering on Soil-structure Interaction under Seismic Load [Volume 35, Issue 10, 2022, Pages 1989-2006]
-
Zarrabi, Ali
THE PRODUCTION OF GLUCOAMYLASE BY ASPERGILLUS NIGER UNDER SOLID STATE CONDITIONS (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 1-8]
-
Zarrati, A.R.
Development of an Implicit Numerical Model for Calculation of Sub and Super Critical Flows [Volume 18, Issue 1, 2005, Pages 27-38]
-
Zarrati, A.R.
Development of an Implicit Numerical Model for Calculation of SUB-and Super-Critical Flows [Volume 18, Issue 1, 2005, Pages 85-95]
-
Zarrati, A.R.
Effect of Collars and Bars in Reducing the Local Scour Around Cylindrical Bridge Piers [Volume 22, Issue 4, 2009, Pages 333-342]
-
Zarrati, A.R.
Effect of collar on time development and extent of scour hole around cylindrical bridge piers [Volume 25, Issue 1, 2012, Pages 11-16]
-
Zaulkiflee, N. D
Extraction of Acetaminophen from Aqueous Solution by Emulsion Liquid Membrane Using Taylor-Couette Column [Volume 31, Issue 8, 2018, Pages 1413-1420]
-
Zavari, M.
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Zayer Hassan, Z.
Optimizing the Properties of Metakaolin-based (Na, K)-Geopolymer Using Taguchi Design Method [Volume 33, Issue 4, 2020, Pages 631-638]
-
Zaza, G.
Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal [Volume 30, Issue 8, 2017, Pages 1176-1181]
-
ZBITOU, Jamal
New Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE) [Volume 29, Issue 8, 2016, Pages 1056-1061]
-
Zebreva, Margarita
Efficient charging of aerosol nanoparticles by corona-needle charger with improved design for printing of metallic microstructures [(Articles in Press)]
-
Zegordi, S.H
An Integrated Closed-loop Supply Chain Configuration Model and Supplier Selection based on Offered Discount Policies [Volume 31, Issue 3, 2018, Pages 440-449]
-
Zeighami, E.
Predicting Shear Capacity of Panel Zone Using Neural Network and Genetic Algorithm [Volume 33, Issue 8, 2020, Pages 1512-1521]
-
Zeighami, E.
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Zeighami, E.
Experimental Study on Bonding CFRP to Fiber Concrete Beam Considering the Effect of using Nanographene Oxide in Improving the Mechanical Properties of Polyamine Resin [Volume 35, Issue 8, 2022, Pages 1524-1532]
-
Zeinali, M.
Autonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach [Volume 31, Issue 9, 2018, Pages 1593-1601]
-
Zeinali, M.
Investigation on Nose and Tail Shape Effects on Hydrodynamic Parameters in Autonomous Underwater Vehicles [Volume 31, Issue 12, 2018, Pages 2102-2108]
-
Zeinali, M.
High Energy Release-high Retraction Smart Polymer Fibers used in Artificial Muscle Fabrication [Volume 36, Issue 4, 2023, Pages 788-796]
-
Zeinali Davarani, Roohalamin
Effect of Different Turbine-generator Shaft Models on the Subsynchronous Resonance Phenomenon in the Double Cage Induction Generator Based Wind Farm [Volume 29, Issue 8, 2016, Pages 1103-1111]
-
Zende, A. A.
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Zhang, C.
Mechanical Properties Analysis of Bilayer Euler-Bernoulli Beams Based on Elasticity Theory [Volume 33, Issue 8, 2020, Pages 1662-1667]
-
Zhang, Can-can
Review Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes [Volume 27, Issue 10, 2014, Pages 1503-1510]
-
Zhang, D.
Multi-factorial Analysis on Vault Stability of an Unsymmetrically Loaded Tunnel Using Response Surface Method [Volume 32, Issue 11, 2019, Pages 1570-1576]
-
Zhang, D. B.
Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
-
Zhang, Dingbang
Physical Model Test and Numerical Simulation Study of Deformation Mechanism of Wall Rock on Open Pit to Underground Mining (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1795-1802]
-
Zhang, Dingbang
New Analytic Method for Subgrade Settlement Calculation of the New Cement Fly-ash Grave Pile-slab Structure [Volume 29, Issue 10, 2016, Pages 1364-1371]
-
Zhang, D. M.
Heat Transfer Performance Analysis and Optimization of Exhaust Gas Recirculation Cooler with Different Structural Characteristics [Volume 33, Issue 10, 2020, Pages 2105-2112]
-
Zhang, Hailong
Vibration of Train-Rail-Bridge Interaction Considering Rail Irregularity with Arbitrary Wavelength [Volume 28, Issue 4, 2015, Pages 516-522]
-
Zhang, Haiyan
Sliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory [Volume 30, Issue 1, 2017, Pages 109-119]
-
Zhang, Hongning
Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
-
Zhang, Huizeng
Analysis of the Impact of Managed Pressure Drilling Technology on Current Casing Program Design Methods (TECHNICAL NOTE) [Volume 27, Issue 4, 2014, Pages 659-666]
-
Zhang, J.
Reliability Evaluation of a Disaster Airflow Emergency Control System Based on Bayesian Networks [Volume 33, Issue 11, 2020, Pages 2416-2424]
-
Zhang, K.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Zhang, Kavin
Research on Acquisition Probability of the Visible Light Reconnaissance Equipment to Ground Targets [Volume 29, Issue 4, 2016, Pages 500-504]
-
Zhang, Kavin
The Design and Realization of a Gait Rehabilitation Training Robot with Body Supporting Mechanism [Volume 29, Issue 9, 2016, Pages 1314-1318]
-
Zhang, Kavin
Control Simulation and Experimental Verification of Maximum Power Point Tracking Based on RT-LAB (TECHNICAL NOTE) [Volume 29, Issue 10, 2016, Pages 1372-1379]
-
Zhang, M. H.
Structural Stiffness Matching Modeling and Active Design Approach for Multiple Stepped Cantilever Beam [Volume 35, Issue 7, 2022, Pages 1227-1236]
-
Zhang, W.
Calculation and Analysis of Groove Elastic Support’s Radial Stiffness (RESEARCH NOTE) [Volume 30, Issue 7, 2017, Pages 1066-1073]
-
Zhang, Y.
Soft Foundation Strengthening Effect and Structural Optimization of a New Cement Fly-ash and Gravel Pile-slab Structure [Volume 30, Issue 7, 2017, Pages 955-963]
-
Zhang, Y.
Comparison of Two Computational Microstructure Models for Predicting Effective Transverse Elastic Properties of Unidirectional Fiber Reinforced Composites [Volume 31, Issue 9, 2018, Pages 1498-1504]
-
Zhang, Yuyang
Experimental Modeling of a Long Orifice-type Restrictor of High Speed Turbine Hybrid Bearing [Volume 29, Issue 3, 2016, Pages 378-385]
-
Zhang, Z.
A Unified Approach for Design of Lp Polynomial Algorithms [Volume 7, Issue 3, 1994, Pages 155-160]
-
Zhang, Z.
The Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 175-179]
-
Zhang, Z.
Multi-factorial Analysis on Vault Stability of an Unsymmetrically Loaded Tunnel Using Response Surface Method [Volume 32, Issue 11, 2019, Pages 1570-1576]
-
Zhang, Z.
Mechanical Properties Analysis of Bilayer Euler-Bernoulli Beams Based on Elasticity Theory [Volume 33, Issue 8, 2020, Pages 1662-1667]
-
Zhang, Z.
A Dynamic Model for Laminated Piezoelectric Microbeam [Volume 36, Issue 6, 2023, Pages 1143-1149]
-
Zhanxin, Y.
Investigation on Equivalent Trans-utilization Mode and Benefit of Wind Energy [Volume 31, Issue 10, 2018, Pages 1708-1714]
-
Zhao, C. W.
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Zhao, L
Comparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck [Volume 31, Issue 2, 2018, Pages 204-211]
-
Zhao, L.
Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
-
Zhao, L.
Analytical Investigation of Tire-Road Contact Characteristics for Wheelchair Robots Safely Running [Volume 31, Issue 10, 2018, Pages 1767-1772]
-
Zhao, L.
Analytical Matching of Optimal Damping Characteristics Curve for Vehicle Passive Suspensions [Volume 31, Issue 12, 2018, Pages 2109-2114]
-
Zhao, R
Design, Modeling and Experiments of An In-pipe Magnetostrictive Impact Drive Mechanism [Volume 31, Issue 5, 2018, Pages 734-740]
-
Zhao, X.
Multi-factorial Analysis on Vault Stability of an Unsymmetrically Loaded Tunnel Using Response Surface Method [Volume 32, Issue 11, 2019, Pages 1570-1576]
-
Zheng, B.
Application of Ultra-sensitive Pillar-enhanced Quartz Crystal Resonators for Airborne Detection of Nanoparticles: A Theoretical Study [Volume 36, Issue 6, 2023, Pages 1136-1142]
-
Zheng, C.
Jensen-Shannon Divergence of Two Eddy Current Distributions Induced by Circular and Fractal Koch Excitation Coils [Volume 35, Issue 7, 2022, Pages 1330-1342]
-
Zheng, Ming
An Analysis Method on Post-earthquake Traversability of Road Network Considering Building Collapse [Volume 32, Issue 11, 2019, Pages 1584-1590]
-
Zheng, Z.
The Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE) [Volume 11, Issue 3, 1998, Pages 175-179]
-
Zhengyi, HU
EXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 73-80]
-
Zhiani, R.
Effects of KCC-1/Ag Nanoparticles on the Mechanical Properties of Concrete [Volume 35, Issue 7, 2022, Pages 1388-1397]
-
Zhichuan, Zheng
EXPERIMENT AND APPLICATION OF AN ANNULAR FOAM BREAKER FOR FOAM DRILLING FLUID (RESEARCH NOTE) [Volume 25, Issue 1, 2012, Pages 73-80]
-
Zhixian, Z.
Analysis of Vibration Characteristics of PD Control Active Magnetic Bearing and Cracked Rotor System (RESEARCH NOTE) [Volume 32, Issue 4, 2019, Pages 596-601]
-
Zhong, Ning
Sampling Rate Conversion in the Discrete Linear Canonical Transform Domain [Volume 29, Issue 5, 2016, Pages 615-620]
-
Zhong, Zhixian
An Improved N-dimensional NURBs-based Metamodel [Volume 28, Issue 8, 2015, Pages 1219-1225]
-
Zhong, Zhixian
H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System [Volume 28, Issue 8, 2015, Pages 1233-1240]
-
Zhou, C
Comparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck [Volume 31, Issue 2, 2018, Pages 204-211]
-
Zhou, C.
Modelling and Test Verification of Suspension Optimal Damping Ratio for Electric Vehicles Considering Occupant-cushion and In-wheel Motor Effects [Volume 30, Issue 11, 2017, Pages 1784-1791]
-
Zhou, C.
Analytical Investigation of Tire-Road Contact Characteristics for Wheelchair Robots Safely Running [Volume 31, Issue 10, 2018, Pages 1767-1772]
-
Zhou, C.
Analytical Matching of Optimal Damping Characteristics Curve for Vehicle Passive Suspensions [Volume 31, Issue 12, 2018, Pages 2109-2114]
-
Zhou, Chuanbo
Physical Model Test and Numerical Simulation Study of Deformation Mechanism of Wall Rock on Open Pit to Underground Mining (RESEARCH NOTE) [Volume 27, Issue 11, 2014, Pages 1795-1802]
-
Zhou, D.
Turbulent Drag Reduction by Spanwise Wall Oscillations [Volume 21, Issue 1, 2008, Pages 85-104]
-
Zhou, G.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Zhou, H.
An Incentive Mechanism for Energy Internet of Things Based on Blockchain and Stackelberg Game [Volume 36, Issue 8, 2023, Pages 1468-1477]
-
Zhou, M.
Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
-
Zhou, X.
An Effective Image Demosaicking Algorithm with Correlations among RGB Channels [Volume 30, Issue 8, 2017, Pages 1190-1196]
-
Zhou, X.
Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image [Volume 30, Issue 10, 2017, Pages 1471-1478]
-
Zhou, X.
Improved Adaptive Median Filter Algorithm for Removing Impulse Noise from Grayscale Images [Volume 30, Issue 10, 2017, Pages 1503-1509]
-
Zhou, Xuejun
Least Squares Support Vector Machine for Constitutive Modeling of Clay [Volume 28, Issue 11, 2015, Pages 1571-1578]
-
Zhu, changsheng
H∞ Robust Controller Design and Experimental Analysis of Active Magnetic Bearings with Flexible Rotor System [Volume 28, Issue 8, 2015, Pages 1233-1240]
-
Zhu, M.
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Zhu, W. X.
Influence of Residual Stress on Fatigue Life of Hot Forged and Shot Blasted Steel Components [Volume 15, Issue 1, 2002, Pages 79-86]
-
Zhuo, Zhihai
Sampling Rate Conversion in the Discrete Linear Canonical Transform Domain [Volume 29, Issue 5, 2016, Pages 615-620]
-
Ziaei-Rad, S.
Aerodynamic Design Optimization Using Genetic Algorithm (RESEARCH NOTE) [Volume 16, Issue 3, 2003, Pages 307-318]
-
Ziaie, Farhood
Preparation and Characterization of SiO2-CaCl2 Nanocomposite by the Sol-Gel Method [Volume 22, Issue 3, 2009, Pages 299-305]
-
Ziapour, Behrooz
More about Thermosyphone Rankine Cycle Performance Enhancement (RESEARCH NOTE) [Volume 28, Issue 4, 2015, Pages 642-647]
-
Ziapour, Behrooz
Numerical Study of Natural Convection Heat Transfer in a Horizontal Wavy Absorber Solar Collector Based on the Second Law Analysis [Volume 29, Issue 1, 2016, Pages 109-117]
-
Ziaratban, M.
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Zibasokhan, H
A Macro-model for Nonlinear Analysis of 3D Reinforced Concrete Shear Walls [Volume 31, Issue 2, 2018, Pages 220-227]
-
Zinadini, S.
Influence of Operating Variables on Performance of Nanofiltration Membrane for Dye Removal from Synthetic Wastewater Using Response Surface Methodology [Volume 29, Issue 12, 2016, Pages 1650-1658]
-
Zinadini, S.
Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
-
Zinatizadeh, A. A.
Preparation and Characterization of an Antifouling Polyethersulfone Nanofiltration Membrane Blended with Graphene Oxide/Ag Nanoparticles [Volume 30, Issue 10, 2017, Pages 1425-1433]
-
Zinatizadeh, A. A.
Process Performance of a Granular Single Bioreactor with Continuous Feeding and Intermittent Discharge Regime Treating Dairy Wastewater [Volume 32, Issue 1, 2019, Pages 10-17]
-
Zinatizadeh, A. A.
Influence of Different Culture Selection Methods on Polyhydroxyalkanoate Production at Short-term Biomass Enrichment [Volume 32, Issue 2, 2019, Pages 184-192]
-
Zinatizadeh, A. A.
Optimization of Biodiesel Production from Sunflower Oil Transesterification using Ca-K/Al2O3 Nanocatalysts [Volume 35, Issue 2, 2022, Pages 351-359]
-
Zinatizadeh, A. A.
Visible Light Activated Fe-N-SiO2/TiO2 Photocatalyst: Providing an Opportunity for Enhanced Photocatalytic Degradation of Antibiotic Oxytetracycline in Aqueous Solution [Volume 36, Issue 4, 2023, Pages 615-629]
-
Zinatizadeh, A. A. L.
Pretreated Palm Oil Mill Effluent (POME) Digestion in an Up-Flow Anaerobic Sludge Fixed Film Bioreactor: a Comparative Study [Volume 19, Issue 1, 2006, Pages 1-9]
-
Zinatizadeh, A. A. L.
Controllable Synthesis of Flower-Like ZnO Nanostructure with Hydrothermal Method (RESEARCH NOTE) [Volume 22, Issue 3, 2009, Pages 283-290]
-
Zinatizadeh, A. A. L.
A Comparative Study on Performance of Two Aerobic Sequencing Batch Reactors with Flocculated and Granulated Sludge Treating an Industrial Estate Wastewater: Process Analysis and Modeling [Volume 26, Issue 2, 2013, Pages 105-116]
-
Zinatizadeh, A. A. L.
Dynamic Performance Analysis and Simulation of a Full Scale Activated Sludge System Treating an Industrial Wastewater Using Artificial Neural Network [Volume 26, Issue 5, 2013, Pages 465-472]
-
Zinatizadeh, A. A. L.
Influence of Operating Variables on Performance of Nanofiltration Membrane for Dye Removal from Synthetic Wastewater Using Response Surface Methodology [Volume 29, Issue 12, 2016, Pages 1650-1658]
-
Zio, E.
Modeling and Analyzing Supporting Systems for Smart Manufacturing Systems with Stochastic, Technical and Economic Dependences [Volume 33, Issue 11, 2020, Pages 2310-2318]
-
Zirakian, T.
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Zivarian, Hossein
Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE) [Volume 30, Issue 1, 2017, Pages 57-65]
-
Zivdar, M.
Comaprison of Mass-Transfer Efficiencies of Scc and Structured Packing [Volume 14, Issue 1, 2001, Pages 1-8]
-
Zivdar, M.
Microencapsulation of Orange Oil by Complex Coacervation and its Release Behavior (REASEARCH NOTE) [Volume 17, Issue 4, 2004, Pages 333-342]
-
Zoghi, A. T.
Full Analysis of Low Finned Tube Heat Exchangers [Volume 16, Issue 3, 2003, Pages 217-232]
-
Zoghi, M.
Synchronous Generator Dual Estimation Using Sigma Points Kalman Filter [Volume 37, Issue 7, 2024, Pages 1239-1251]
-
Zoheir, C.
Numerical Modeling of Non-equilibrium Plasma Discharge of Hydrogenated Silicon Nitride (SiH4/NH3/H2) [Volume 33, Issue 8, 2020, Pages 1440-1449]
-
Zohrevand, A.
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Zohrevand, A.
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Zojaji, Z.
Gender Identification of Mobile Phone Users based on Internet Usage Pattern [Volume 36, Issue 2, 2023, Pages 335-347]
-
Zoka, S
Two Novel D-Flip Flops with Level Triggered Reset in Quantum Dot Cellular Automata Technology [Volume 31, Issue 3, 2018, Pages 415-421]
-
Zokaei, Masood
Effect of Collars and Bars in Reducing the Local Scour Around Cylindrical Bridge Piers [Volume 22, Issue 4, 2009, Pages 333-342]
-
Zolfaghari, M.
Modifications to Walker-Anderson Model for Analysis of High-velocity Penetration of an Eroding Long-rod Projectile into Semi-infinite Concrete Targets [Volume 30, Issue 5, 2017, Pages 775-784]
-
Zolfaghari, M.
Effects of Various Ageing Heat Treatments on Microstructural Features and Hardness of Piston Aluminum Alloy [Volume 32, Issue 1, 2019, Pages 92-98]
-
Zolfaghari, Mahdi
Fuzzy Approximation Model-based Robust Controller Design for Speed Control of BLDC Motor [Volume 28, Issue 3, 2015, Pages 426-432]
-
Zolfaghari, Mojtaba
Temperature in bone drilling process: Mathematical modeling and Optimization of effective parameters (TECHNICAL NOTE) [Volume 29, Issue 7, 2016, Pages 946-953]
-
Zolfaghari, S. A.
Numerical Investigation on Oscillation Behavior of a Non-isothermal Self-excited Jet in a Cavity: The Effects of Reynolds Number and Temperature Differences [Volume 35, Issue 6, 2022, Pages 1193-1201]
-
Zolfaghary Azizi, H
Comparison of the hyperbolic range of two-fluid models on two-phase gas -liquid flows [Volume 31, Issue 1, 2018, Pages 144-156]
-
Zolfkhani, H.
A Temperature Compensation Voltage Controlled Oscillator Using a Complementary to Absolute Temperature Voltage Reference [Volume 32, Issue 5, 2019, Pages 710-719]
-
Zolriasatein, A.
Corrosion Behavior Evaluation of Nanolayered CrN/CrAlN Coatings on Titanium and Ti6Al4V Substrates [Volume 37, Issue 1, 2024, Pages 127-135]
-
Zomorodian, R.
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Zomorrodian, A. R.
Range Distributions of Low-energy Nitrogen and Oxygen Ions in Silicon (RESEARCH NOTE) [Volume 12, Issue 1, 1999, Pages 45-48]
-
Zoraghi, Nima
Resource Constrained Project Scheduling with Material Ordering: Two Hybridized Meta-Heuristic Approaches (TECHNICAL NOTE) [Volume 28, Issue 6, 2015, Pages 896-902]
-
Zou, J.
Vibration and Noise Reduction Optimization Design of Mine Chute with Foam Aluminum Laminated Structure [Volume 33, Issue 8, 2020, Pages 1668-1676]
-
Zou, Yang
The Effects of Excitation Signal on the Resolution of the Liquid Crystal Capacitive Chemical and Biological Sensors [Volume 26, Issue 11, 2013, Pages 1275-1280]
-
ZOULLOUTI, Bouchra
Risk Analysis of Operating Room Using the Fuzzy Bayesian Network Model [Volume 30, Issue 1, 2017, Pages 66-74]
-
Zounemat-Kermani, M.
Numerical Investigation of Island Effects on Depth Averaged Fluctuating Flow in the Persian Gulf [Volume 20, Issue 2, 2007, Pages 117-128]
-
Zubkova, Olga
The potential application of saponite clay for the production of drilling fluids [(Articles in Press)]
-
Zunaid, M.
Energy and Second Law of Thermodynamics Analysis of Shower Cooling Tower with Variation in Inlet Air Temperature [Volume 30, Issue 7, 2017, Pages 1090-1097]
-
Zuo, H.
Root System Traits and Mechanical Properties of Three Shrub Species: Implications for the Structural Stability of the Ecological Slope [Volume 35, Issue 2, 2022, Pages 291-299]
Your query does not match with any item